The contribution of plasmid design and release to in vivo gene expression following delivery from cationic polymer modified scaffolds

A cationic lipid with advanced membrane fusion performance for pDNA and mRNA delivery

The success of mRNA vaccines for COVID-19 prevention raised global awareness of the importance of nucleic acid drugs. The approved systems for nucleic acid delivery were mainly formulations of different lipids, yielding lipid nanoparticles (LNPs) with complex internal structures. Due to the multiple components, the relationship between the structure of each component and the overall biological activity of LNPs is hard to study. However, ionizable lipids have been extensively explored. In contrast to former studies on the optimization of hydrophilic parts in single-component self-assemblies, we report in this study on structural alterations of the hydrophobic segment. We synthesize a library of amphiphilic cationic lipids by varying the lengths (C = 8-18), numbers (N = 2, 4), and unsaturation degrees (Ω = 0, 1) of hydrophobic tails. Notably, all self-assemblies with nucleic acid have significant differences in particle size, stability in serum, membrane fusion, and fluidity. Moreover, the novel mRNA/pDNA formulations are characterized by overall low cytotoxicity, efficient compaction, protection, and release of nucleic acids. We find that the length of hydrophobic tails dominates the formation and stability of the assembly. And at a certain length, the unsaturated hydrophobic tails enhance the membrane fusion and fluidity of assemblies and thus significantly affect the transgene expression, followed by the number of hydrophobic tails.

Physical and mechanical cues affecting biomaterial-mediated plasmid DNA delivery: insights into non-viral delivery systems

BACKGROUND

Whilst traditional strategies to increase transfection efficiency of non-viral systems aimed at modifying the vector or the polyplexes/lipoplexes, biomaterial-mediated gene delivery has recently sparked increased interest. This review aims at discussing biomaterial properties and unravelling underlying mechanisms of action, for biomaterial-mediated gene delivery. DNA internalisation and cytoplasmic transport are initially discussed. DNA immobilisation, encapsulation and surface-mediated gene delivery (SMD), the role of extracellular matrix (ECM) and topographical cues, biomaterial stiffness and mechanical stimulation are finally outlined.

MAIN TEXT

Endocytic pathways and mechanisms to escape the lysosomal network are highly variable. They depend on cell and DNA complex types but can be diverted using appropriate biomaterials. 3D scaffolds are generally fabricated via DNA immobilisation or encapsulation. Degradation rate and interaction with the vector affect temporal patterns of DNA release and transgene expression. In SMD, DNA is instead coated on 2D surfaces. SMD allows the incorporation of topographical cues, which, by inducing cytoskeletal re-arrangements, modulate DNA endocytosis. Incorporation of ECM mimetics allows cell type-specific transfection, whereas in spite of discordances in terms of optimal loading regimens, it is recognised that mechanical loading facilitates gene transfection. Finally, stiffer 2D substrates enhance DNA internalisation, whereas in 3D scaffolds, the role of stiffness is still dubious.

CONCLUSION

Although it is recognised that biomaterials allow the creation of tailored non-viral gene delivery systems, there still are many outstanding questions. A better characterisation of endocytic pathways would allow the diversion of cell adhesion processes and cytoskeletal dynamics, in order to increase cellular transfection. Further research on optimal biomaterial mechanical properties, cell ligand density and loading regimens is limited by the fact that such parameters influence a plethora of other different processes (e.g. cellular adhesion, spreading, migration, infiltration, and proliferation, DNA diffusion and release) which may in turn modulate gene delivery. Only a better understanding of these processes may allow the creation of novel robust engineered systems, potentially opening up a whole new area of biomaterial-guided gene delivery for non-viral systems.

Polymeric Delivery of Therapeutic Nucleic Acids

The advent of genome editing has transformed the therapeutic landscape for several debilitating diseases, and the clinical outlook for gene therapeutics has never been more promising. The therapeutic potential of nucleic acids has been limited by a reliance on engineered viral vectors for delivery. Chemically defined polymers can remediate technological, regulatory, and clinical challenges associated with viral modes of gene delivery. Because of their scalability, versatility, and exquisite tunability, polymers are ideal biomaterial platforms for delivering nucleic acid payloads efficiently while minimizing immune response and cellular toxicity. While polymeric gene delivery has progressed significantly in the past four decades, clinical translation of polymeric vehicles faces several formidable challenges. The aim of our Account is to illustrate diverse concepts in designing polymeric vectors towards meeting therapeutic goals of in vivo and ex vivo gene therapy. Here, we highlight several classes of polymers employed in gene delivery and summarize the recent work on understanding the contributions of chemical and architectural design parameters. We touch upon characterization methods used to visualize and understand events transpiring at the interfaces between polymer, nucleic acids, and the physiological environment. We conclude that interdisciplinary approaches and methodologies motivated by fundamental questions are key to designing high-performing polymeric vehicles for gene therapy.

Merging 3D printing with electrospun biodegradable small-caliber vascular grafts immobilized with VEGF

The major challenge of commercially available vascular substitutes comes from their limitations in terms of hydrophobic surface, which is hostile to cell growth. To date, tissue-engineered and synthetic grafts have not translated well to clinical trials when looking at small diameters. We conceptualized a cell-free structurally reinforced biodegradable vascular graft recapitulating the anisotropic feature of a native blood vessel. The nanofibrous scaffold is designed in such a way that it will gradually degrade systematically to yield a neo-vessel, facilitated by an immobilized bioactive molecule-vascular endothelial growth factor (VEGF). The nano-topographic cue of the device is capable of direct host cell infiltration. We evaluated the burst pressure, histology, hemocompatibility, compression test, and mechanical analysis of the new graft. The graft implanted into the carotid artery of a porcine model demonstrated a good patency rate as early as two week post-implantation. This graft reinforced design approach when employed in vascular tissue engineering might strongly influencing regenerative medicine.

Role of polydopamine's redox-activity on its pro-oxidant, radical-scavenging, and antimicrobial activities

Polydopamine (PDA) is a bioinspired material and coating that offers diverse functional activities (e.g., photothermal, antioxidant, and antimicrobial) for a broad range of applications. Although PDA is reported to be redox active, the association between PDA's redox state and its functional performance has been difficult to discern because of PDA's complex structure and limitations in methods to characterize redox-based functions. Here, we use an electrochemical reverse engineering approach to confirm that PDA is redox-active and can repeatedly accept and donate electrons. We observed that the electron-donating ability of PDA offers the detrimental pro-oxidant effect of donating electrons to O₂ to generate reactive oxygen species (ROS) or, alternatively, the beneficial antioxidant effect of quenching oxidative free radicals. Importantly, PDA's electron-donating ability depends on its redox state and is strongly influenced by external factors including metal ion binding as well as near-infrared (NIR) irradiation. Furthermore, we demonstrated that PDA possesses redox state-dependent antimicrobial properties in vitro and in vivo. We envision that clarification of PDA's redox activity will enable better understanding of PDA's context-dependent properties (e.g., antioxidant and pro-oxidant) and provide new insights for further applications of PDA. STATEMENT OF SIGNIFICANCE: We believe this is the first report to characterize the redox activities of polydopamine (PDA) and to relate these redox activities to functional properties important for various proposed applications of PDA. We observed that polydopamine nanoparticles 1) are redox-active; 2) can repeatedly donate and accept electrons; 3) can accept electrons from reducing agents (e.g., ascorbate), donate electrons to O₂ to generate ROS, and donate electrons to free radicals to quench them; 4) have redox state-dependent electron-donating abilities that are strongly influenced by metal ion binding as well as NIR irradiation; and 5) have redox state-dependent antimicrobial activities.

Scaffold mediated gene knockdown for neuronal differentiation of human neural progenitor cells

The use of human induced pluripotent stem cell-derived neural progenitor cells (hiPSC-NPCs) is an attractive therapeutic option for damaged nerve tissues. To direct neuronal differentiation of stem cells, we have previously developed an electrospun polycaprolactone nanofiber scaffold that was functionalized with siRNA targeting Re-1 silencing transcription factor (REST), by mussel-inspired bioadhesive coating. However, the efficacy of nanofiber-mediated RNA interference on hiPSC-NPCs differentiation remains unknown. Furthermore, interaction between such cell-seeded scaffolds with injured tissues has not been tested. In this study, scaffolds were optimized for REST knockdown in hiPSC-NPCs to enhance neuronal differentiation. Specifically, the effects of two different mussel-inspired bioadhesives and transfection reagents were analyzed. Scaffolds functionalized with RNAiMAX Lipofectamine-siREST complexes enhanced the differentiation of hiPSC-NPCs into TUJ1⁺ cells (60% as compared to 22% in controls with scrambled siNEG after 9 days) without inducing high cytotoxicity. When cell-seeded scaffolds were transplanted to transected spinal cord organotypic slices, similar efficiency in neuronal differentiation was observed. The scaffolds also supported the migration of cells and neurite outgrowth from the spinal cord slices. Taken together, the results suggest that this scaffold can be effective in enhancing hiPSC-NPC neuronal commitment by gene-silencing for the treatment of injured spinal cords.

It's All in the Delivery: Designing Hydrogels for Cell and Non-viral Gene Therapies

Hydrogels provide a regenerative medicine platform with their ability to create an environment that supports transplanted or endogenous infiltrating cells and enables these cells to restore or replace the function of tissues lost to disease or trauma. Furthermore, these systems have been employed as delivery vehicles for therapeutic genes, which can direct and/or enhance the function of the transplanted or endogenous cells. Herein, we review recent advances in the development of hydrogels for cell and non-viral gene delivery through understanding the design parameters, including both physical and biological components, on promoting transgene expression, cell engraftment, and ultimately cell function. Furthermore, this review identifies emerging opportunities for combining cell and gene delivery approaches to overcome challenges to the field.

Photoluminescent and biodegradable polycitrate-polyethylene glycol-polyethyleneimine polymers as highly biocompatible and efficient vectors for bioimaging-guided siRNA and miRNA delivery

Development of biodegradable and biocompatible non-viral vectors with intrinsical multifunctional properties such as bioimaging ability for highly efficient nucleic acids delivery still remains a challenge. Here, a biodegradable poly (1,8-octanedio-citric acid)-co-polyethylene glycol grafted with polyethyleneimine (PEI) (POCG-PEI) polymers with the photoluminescent capacity were synthesized for nucleic acids delivery (siRNA and miRNA). POCG-PEI polymers can efficiently bind various nucleic acids, protect them against enzymatic degradation and release the genes in the presence of polyanionic heparin. POCG-PEI also showed a significantly low cytotoxicity, enhanced cellular uptake and high transfection efficiency of nucleic acids, as compared to commercial transfection agents, lipofectamine 2000 (Lipo) and polyethylenimine (PEI 25K). POCG-PEI polymers demonstrate an excellent photostability, which allows for imaging the cells and real-time tracking the nucleic acids delivery. The photoluminescent property, low cytotoxicity, biodegradation, good gene binding and protection ability and high genes delivery efficiency make POCG-PEI highly competitive as a non-virus vector for genes delivery and real-time bioimaging applications. Our results may be also an important step for designing biodegradable biomaterials with multifunctional properties towards bioimaging-guided genes therapeutic applications.

STATEMENT OF SIGNIFICANCE

Here, a biodegradable poly (1,8-octanedio-citric acid)-co-polyethylene glycol grafted with polyethyleneimine (PEI) (POCG-PEI) polymers with controlled photoluminescent capacity were synthesized for nucleic acids delivery (siRNA and miRNA). POCG-PEI polymers can efficiently bind various nucleic acids, protect them against enzymatic degradation and release the genes in the presence of polyanionic heparin. POCG-PEI also showed a significantly low cytotoxicity, enhanced cellular uptake and high transfection efficiency of nucleic acids, as compared to commercial transfection agents, lipofectamine 2000 (Lipo) and polyethylenimine (PEI 25K). POCG-PEI polymers demonstrate an excellent photostability, which allows for imaging the cells and real-time tracking the nucleic acids delivery. Our results may be also an important step for designing biodegradable biomaterials with multifunctional properties towards bioimaging-guided genes therapeutic applications.

The effect of REDV/TiO2 coating coronary stents on in-stent restenosis and re-endothelialization

The coronary artery stent has been widely used in clinic. In-stent restenosis was mainly caused by the excessive proliferation of smooth muscle cell and the inflammation due to the metal ion released from stent scaffold of the drug-eluting stent. Thus, to reduce the in-stent restenosis and promote the vascular endothelialization have become a hot research point in this area. In this paper, a nano-TiO₂ ceramic coating was deposited on 316L stainless steel to reduce the metal ion release and to inhibit the inflammation reaction. An endothelia cell selective adhesion peptide Arg-Glu-Asp-Val (REDV) coating was prepared on the ceramic coating by a polydopamine technology to promote the endothelialization. The corrosion test indicated that nano-TiO₂ ceramic film could effectively decrease the nickel ion released from 316L stainless steel. REDV/TiO₂ coating could promote the endothelial cell adhesion and proliferation, meanwhile REDV/TiO₂ coating could also increase the nitric oxide concentration. Bare metal stent, TiO₂-coated stent and REDV/TiO₂-coated stent were implanted in the iliac arteries of rabbit model. In-stent restenosis and re-endothelialization were evaluated at 28 days post-implantation of the stents. The results showed that REDV/TiO₂-coated stents could effectively reduce in-stent restenosis and promote re-endothelialization in comparison with TiO₂-coated drug-eluting stent and bare metal stent. These results suggest that REDV/TiO₂-coated drug-eluting stent maybe a good choice of the application for coronary artery disease.

Bone Regeneration Using Gene-Activated Matrices

Gene delivery to bone is a potential therapeutic strategy for directed, sustained, and regulated protein expression. Tissue engineering strategies for bone regeneration include delivery of proteins, genes (viral and non-viral-mediated delivery), and/or cells to the bone defect site. In addition, biomimetic scaffolds and scaffolds incorporating bone anabolic agents greatly enhance the bone repair process. Regional gene therapy has the potential of enhancing bone defect healing and bone regeneration by delivering osteogenic genes locally to the osseous lesions, thereby reducing systemic toxicity and the need for using supraphysiological dosages of therapeutic proteins. By implanting gene-activated matrices (GAMs), sustained gene expression and continuous osteogenic protein production in situ can be achieved in a way that stimulates osteogenesis and bone repair within osseous defects. Critical parameters substantially affecting the therapeutic efficacy of gene therapy include the choice of osteogenic transgene(s), selection of non-viral or viral vectors, the wound environment, and the selection of ex vivo and in vivo gene delivery strategies, such as GAMs. It is critical for gene therapy applications that clinically beneficial amounts of proteins are synthesized endogenously within and around the lesion in a sustained manner. It is therefore necessary that reliable and reproducible methods of gene delivery be developed and tested for their efficacy and safety before translating into clinical practice. Practical considerations such as the age, gender, and systemic health of patients and the nature of the disease process also need to be taken into account in order to personalize the treatments and progress towards developing a clinically applicable gene therapy for healing bone defects. This review discusses tissue engineering strategies to regenerate bone with specific focus on non-viral gene delivery systems.

Substrate-mediated delivery of gene complex nanoparticles via polydopamine coating for enhancing competitiveness of endothelial cells

Substrate-mediated delivery of functional plasmid DNA (pDNA) has been proven to be a promising strategy to promote competitiveness of endothelial cells (ECs) over smooth muscle cells (SMCs), which is beneficial to inducing fast endothelialization of implanted vascular devices. Thus, it is of great importance to develop universal approaches with simplicity and easiness to immobilize DNA complex nanoparticles on substrates. In this study, the bioinspired polydopamine (PDA) coating was employed in immobilization of DNA complex nanoparticles, which were composed of protamine (PrS) and plasmid DNA encoding with hepatocyte growth factor (HGF-pDNA) gene. We demonstrated that the DNA complex nanoparticles can be successfully immobilized onto the PDA surface. Consequently, the HGF expression of both ECs and SMCs were significantly improved when they cultured on the DNA complex nanoparticles-immobilized substrates. Furthermore, EC proliferation was specifically promoted due to bioactivity of HGF, leading to an enhancement of EC competitiveness over SMCs. Our findings demonstrated the substrate-mediated functional gene nanoparticle delivery through PDA coating as a simple and efficient approach. It may hold great potential in the field of interventional cardiovascular implants.

The use of collagen-based scaffolds to simulate prostate cancer bone metastases with potential for evaluating delivery of nanoparticulate gene therapeutics

Prostate cancer bone metastases are a leading cause of cancer-related death in men with current treatments offering only marginally improved rates of survival. Advances in the understanding of the genetic basis of prostate cancer provide the opportunity to develop gene-based medicines capable of treating metastatic disease. The aim of this work was to establish a 3D cell culture model of prostate cancer bone metastasis using collagen-based scaffolds, to characterise this model, and to assess the potential of the model to evaluate delivery of gene therapeutics designed to target bone metastases. Two prostate cancer cell lines (PC3 and LNCaP) were cultured in 2D standard culture and compared to 3D cell growth on three different collagen-based scaffolds (collagen and composites of collagen containing either glycosaminoglycan or nanohydroxyapatite). The 3D model was characterised for cell proliferation, viability and for matrix metalloproteinase (MMP) enzyme and Prostate Specific Antigen (PSA) secretion. Chemosensitivity to docetaxel treatment was assessed in 2D in comparison to 3D. Nanoparticles (NPs) containing siRNA formulated using a modified cyclodextrin were delivered to the cells on the scaffolds and gene silencing was quantified. Both prostate cancer cell lines actively infiltrated and proliferated on the scaffolds. Cell culture in 3D resulted in reduced levels of MMP1 and MMP9 secretion in PC3 cells. In contrast, LNCaP cells grown in 3D secreted elevated levels of PSA, particularly on the scaffold composed of collagen and glycosaminoglycans. Both cell lines grown in 3D displayed increased resistance to docetaxel treatment. The cyclodextrin.siRNA nanoparticles achieved cellular uptake and knocked down the endogenous GAPDH gene in the 3D model. In conclusion, development of a novel 3D cell culture model of prostate cancer bone metastasis has been initiated resulting, for the first time, in the successful delivery of gene therapeutics in a 3D in vitro model. Further enhancement of this model will help elucidate the pathogenesis of prostate cancer and also accelerate the design of effective therapies which can penetrate into the bone microenvironment for prostate cancer therapy.

Gene delivery strategies to promote spinal cord repair

Gene therapies hold great promise for the treatment of many neurodegenerative disorders and traumatic injuries in the central nervous system. However, development of effective methods to deliver such therapies in a controlled manner to the spinal cord is a necessity for their translation to the clinic. Although essential progress has been made to improve efficiency of transgene delivery and reduce the immunogenicity of genetic vectors, there is still much work to be done to achieve clinical strategies capable of reversing neurodegeneration and mediating tissue regeneration. In particular, strategies to achieve localized, robust expression of therapeutic transgenes by target cell types, at controlled levels over defined time periods, will be necessary to fully regenerate functional spinal cord tissues. This review summarizes the progress over the last decade toward the development of effective gene therapies in the spinal cord, including identification of appropriate target genes, improvements to design of genetic vectors, advances in delivery methods, and strategies for delivery of multiple transgenes with synergistic actions. The potential of biomaterials to mediate gene delivery while simultaneously providing inductive scaffolding to facilitate tissue regeneration is also discussed.

Hydrogels to modulate lentivirus delivery in vivo from microporous tissue engineering scaffolds

Numerous strategies to induce tissue regeneration employ scaffolds to create space and present biological cues that promote development. In this report, microporous scaffolds that provide structural support were filled with hydrogels to regulate cell adhesion and migration and were investigated as delivery vehicles for gene therapy vectors in vivo. Porous scaffolds were filled with either lentivirus-entrapped collagen or fibrin hydrogels, both of which support cell adhesion yet have varied rates for degradation and cell infiltration. Empty scaffolds and alginate hydrogels were employed as controls, with the latter not supporting cell infiltration. Hydrogel-filled scaffolds retained the lentivirus more effectively than empty scaffolds, and transgene expression was observed for all scaffold conditions. Empty and fibrin-filled scaffolds had maximal transgene expression in vivo, followed by collagen and alginate, with similar levels. Transduced macrophages and dendritic cells were initially present at the scaffold boundary and adjacent tissue and within the scaffold at later time points for all but the alginate condition. At days 3 and 7, expression was also imaged throughout the spleen and thymus, which may result from cell migration from the implant. These studies demonstrate that hydrogels can modulate gene delivery from scaffolds used in cell transplantation and regenerative medicine.

One-pot polymer brush synthesis via simultaneous isocyanate coupling chemistry and “grafting from” RAFT polymerization

One-pot ‘grafting from’ of polystyrene on polydopamine particles was investigated using a newly developed carbonyl-azide reversible addition–fragmentation chain transfer (RAFT) agent.

Modulation of leukocyte infiltration and phenotype in microporous tissue engineering scaffolds via vector induced IL-10 expression

Biomaterial scaffolds are central to many tissue engineering strategies as they create a space for tissue growth and provide a support for cell adhesion and migration. However, biomaterial implantation results in unavoidable injury resulting in an inflammatory response, which can impair integration with the host and tissue regeneration. Toward the goal of reducing inflammation, we investigated the hypothesis that a lentiviral gene therapy-based approach to localized and sustained IL-10 expression at a scaffold could modulate the number, relative proportions, and cytokine production of infiltrating leukocyte populations. Flow cytometry was used to quantify infiltration of six leukocyte populations for 21 days following implantation of PLG scaffolds into intraperitoneal fat. Leukocytes with innate immune functions (i.e., macrophages, dendritic cells, neutrophils) were most prevalent at early time points, while T lymphocytes became prevalent by day 14. Reporter gene delivery indicated that transgene expression persisted at the scaffold for up to 28 days and macrophages were the most common leukocyte transduced, while transduced dendritic cells expressed the greatest levels of transgene. IL-10 delivery decreased leukocyte infiltration by 50% relative to controls, increased macrophage IL-10 expression, and decreased macrophage, dendritic cell, and CD4 T cell IFN-γ expression. Thus, IL-10 gene delivery significantly decreased inflammation following scaffold implant into the intraperitoneal fat, in part by modulating cytokine expression of infiltrating leukocytes.

Polydopamine microcapsules with different wall structures prepared by a template-mediated method for enzyme immobilization

Microcapsules with diverse wall structures may exhibit different performance in specific applications. In the present study, three kinds of mussel-inspired polydopamine (PDA) microcapsules with different wall structures have been prepared by a template-mediated method. More specifically, three types of CaCO3 microspheres (poly(allylamine hydrochloride), (PAH)-doped CaCO3; pure-CaCO3; and poly(styrene sulfonate sodium), (PSS)-doped CaCO3) were synthesized as sacrificial templates, which were then treated by dopamine to obtain the corresponding PDA-CaCO3 microspheres. Through treating these microspheres with disodium ethylene diamine tetraacetic acid (EDTA-2Na) to remove CaCO3, three types of PDA microcapsules were acquired: that was (1) PAH-PDA microcapsule with a thick (∼600 nm) and highly porous capsule wall composed of interconnected networks, (2) pure-PDA microcapsule with a thick (∼600 nm) and less porous capsule wall, (3) PSS-PDA microcapsule with a thin (∼70 nm) and dense capsule wall. Several characterizations confirmed that a higher degree in porosity and interconnectivity of the capsule wall would lead to a higher mass transfer coefficient. When serving as the carrier for catalase (CAT) immobilization, these enzyme-encapsulated PDA microcapsules showed distinct structure-related activity and stability. In particular, PAH-PDA microcapsules with a wall of highly interconnected networks displayed several significant advantages, including increases in enzyme encapsulation efficiency and enzyme activity/stability and a decrease in enzyme leaching in comparison with other two types of PDA microcapsules. Besides, this hierarchically structured PAH-PDA microcapsule may find other promising applications in biocatalysis, biosensors, drug delivery, etc.

Matrix-based gene delivery for tissue repair

Scaffolds for tissue repair must provide structural and biochemical cues to initiate the complex cascade of events that lead to proper tissue formation. Incorporating genes into these scaffolds is an attractive alternative to protein delivery since gene delivery can be tunable to any DNA sequence and genes utilize the cells' machinery to continuously produce therapeutic proteins, leading to longer lasting transgene expression and activation of autocrine and paracrine signaling that are not activated with bulk protein delivery. In this review, we discuss the importance of scaffold design and the impact of its design parameters (e.g. material, architecture, vector incorporation, biochemical cue presentation) on transgene expression and tissue repair.

PLG scaffold delivered antigen-specific regulatory T cells induce systemic tolerance in autoimmune diabetes

Islet transplantation is a promising treatment for human type 1 diabetes mellitus. Transplantation requires systemic immunosuppression, which has numerous deleterious side effects. Islet antigen-specific regulatory T cells (Tregs) have been shown to protect islet grafts from autoimmune destruction in the nonobese diabetic (NOD) model when co-localized in the kidney capsule. An extra-hepatic transplant site was established by transplanting islet-loaded microporous poly (lactide-co-glycolide) (PLG) scaffolds into abdominal fat. This study examined an autoimmune transplantation model and determined whether co-localized Tregs could protect islet grafts in an extra-hepatic and extra-renal transplant site. Normoglycemia was restored, and co-transplanted Tregs extended graft survival, including several instances of indefinite protection. Transplanted Tregs were replaced by recipient-derived Tregs over time, indicating that islet antigen-specific Tregs induce tolerance to islet grafts through host-derived Tregs. Thus, Tregs provided protection against a diverse repertoire of autoreactive T-cell-receptor specificities mediating diabetes in the NOD model, possibly through a phenomenon previously described as infectious tolerance. Interestingly, the infiltration by Tregs protected a second islet transplant, indicating systemic tolerance to islet antigens. In summary, PLG scaffolds can serve as an alternative delivery system for islet transplantation that allows for the co-localization of immunomodulatory cells within islet grafts and induces long-term graft survival in an autoimmune diabetes model. This method of co-localizing immunomodulatory cells with islets in a clinically translatable transplant site to affect the immune system on a local and systemic level has potential therapeutic implications for human islet transplantation.

Biomaterial Scaffolds for Controlled, Localized Gene Delivery of Regenerative Factors

SIGNIFICANCE

Biomaterials play central roles in tissue regeneration by maintaining a space for tissue growth and facilitating its integration with the host. The regenerative capacity of materials can be enhanced through delivery of factors that promote tissue formation. Gene delivery is a versatile strategy to obtain sustained production of tissue inductive factors. Biomaterial scaffolds capable of gene delivery have been shown to induce transgene expression and tissue growth.

CRITICAL ISSUES

The widespread application of biomaterial scaffold systems requires identifying the design principles for the material and vectors that modulate transgene expression temporally and spatially. These technologies and others will ultimately enable spatial and temporal control over expression to recreate the cellular organization and gene expression required for formation of complex tissues.

RECENT ADVANCES

The design parameters for the biomaterials and vectors that modulate the extent and duration of transgene expression and the distribution of transgene-expressing cells within and around the injury are emerging. The cellular interactions with the biomaterial, such as adhesion or migration rate, can influence expression. Furthermore, modulating the interaction between the vector and biomaterial can control vector release while minimizing the exposure to harsh processing conditions.

FUTURE DIRECTIONS

Biomaterial scaffolds that deliver genes encoding for regenerative factors may provide a platform for regenerating complex tissues such as skin, blood vessels, and nerves. Biomaterials capable of localized gene delivery can synergistically target multiple cell processes and will have application to the regeneration of many tissues, with great promise for clinical therapies.

Nanofibrous scaffold-mediated REST knockdown to enhance neuronal differentiation of stem cells

At present, the recovery prospect for patients with chronic neurodegenerative diseases or acute trauma in the central nervous system is sub-optimal. The controlled differentiation of neural stem/progenitor cells (NPCs) to functional neurons is a possible treatment strategy. In contrast to the classical approach of biochemicals supplementation for guided stem cell commitment, this study explores the feasibility of directing neuronal differentiation through synergistic integration of three-dimensional nanofibrous topographical cues and scaffold-mediated knockdown of RE-1 silencing transcription factor (REST) in mouse NPCs. Taking advantage of the strong adhesive property and latent reactivity of mussel-inspired polydopamine (PD) coating, electrospun polycaprolactone (PCL) nanofibers were successfully functionalized with REST siRNAs (denoted as siREST PD-fiber). Sustained REST knockdown in NPCs was achieved for up to five days in vitro and the silencing efficiency was significantly higher than that mediated through siRNA adsorption onto non-PD coated sample controls. The silencing of REST, together with nanofiber topographical effect, significantly enhanced NPC neuronal commitment (57.5% Map2(+) cells in siREST PD-fiber vs. 43.5% in siREST PD-film vs. 50% in PD-fiber controls, p < 0.05) while reducing astrocytic and oligodendrocytic differentiation (10.7% O4(+) cells vs. ∼30% in siREST PD-film, p < 0.01). Taken together, the synergistic effects of scaffold-mediated REST knockdown and topographical cues from PD-modified nanofibers may be a useful strategy for generating functional neurons for therapeutic purposes.

Catechol-based biomimetic functional materials

Catechols are found in nature taking part in a remarkably broad scope of biochemical processes and functions. Though not exclusively, such versatility may be traced back to several properties uniquely found together in the o-dihydroxyaryl chemical function; namely, its ability to establish reversible equilibria at moderate redox potentials and pHs and to irreversibly cross-link through complex oxidation mechanisms; its excellent chelating properties, greatly exemplified by, but by no means exclusive, to the binding of Fe(3+); and the diverse modes of interaction of the vicinal hydroxyl groups with all kinds of surfaces of remarkably different chemical and physical nature. Thanks to this diversity, catechols can be found either as simple molecular systems, forming part of supramolacular structures, coordinated to different metal ions or as macromolecules mostly arising from polymerization mechanisms through covalent bonds. Such versatility has allowed catechols to participate in several natural processes and functions that range from the adhesive properties of marine organisms to the storage of some transition metal ions. As a result of such an astonishing range of functionalities, catechol-based systems have in recent years been subject to intense research, aimed at mimicking these natural systems in order to develop new functional materials and coatings. A comprehensive review of these studies is discussed in this paper.

Porous scaffolds support extrahepatic human islet transplantation, engraftment, and function in mice

Islet transplantation as a therapy or cure for type 1 diabetes has significant promise but has been limited by islet mass requirements and long-term graft failure. The intrahepatic and intravascular site may be responsible for significant loss of transplanted islets. Nonencapsulating biomaterial scaffolds provide a strategy for architecturally defining and modulating extrahepatic sites beyond the endogenous milieu to enhance islet survival and function. We utilized scaffolds to transplant human islets into the intraperitoneal fat of immunodeficient mice. A smaller human islet mass than previously reported reversed murine diabetes and restored glycemic control at human blood glucose levels. Graft function was highly dependent on the islet number transplanted and directly correlated to islet viability, as determined by the ATP-to-DNA ratio. Islets engrafted and revascularized in host tissue, and glucose tolerance testing indicated performance equivalent to healthy mice. Addition of extracellular matrix, specifically collagen IV, to scaffold surfaces improved graft function compared to serum-supplemented media. Porous scaffolds can facilitate efficient human islet transplantation and provide a platform for modulating the islet microenvironment, in ways not possible with current clinical strategies, to enhance islet engraftment and function.

Hydrogel macroporosity and the prolongation of transgene expression and the enhancement of angiogenesis

The utility of hydrogels for regenerative medicine can be improved through localized gene delivery to enhance their bioactivity. However, current systems typically lead to low-level transgene expression located in host tissue surrounding the implant. Herein, we investigated the inclusion of macropores into hydrogels to facilitate cell ingrowth and enhance gene delivery within the macropores in vivo. Macropores were created within PEG hydrogels by gelation around gelatin microspheres, with gelatin subsequently dissolved by incubation at 37 °C. The macropores were interconnected, as evidenced by homogeneous cell seeding in vitro and complete cell infiltration in vivo. Lentivirus loaded within hydrogels following gelation retained its activity relative to the unencapsulated control virus. In vivo, macroporous PEG demonstrated sustained, elevated levels of transgene expression for 6 weeks, while hydrogels without macropores had transient expression. Transduced cells were located throughout the macroporous structure, while non-macroporous PEG hydrogels had transduction only in the adjacent host tissue. Delivery of lentivirus encoding for VEGF increased vascularization relative to the control, with vessels throughout the macropores of the hydrogel. The inclusion of macropores within the hydrogel to enhance cell infiltration enhances transduction and influences tissue development, which has implications for multiple regenerative medicine applications.

Arginine functionalized peptide dendrimers as potential gene delivery vehicles

The quest for highly efficient and safe gene delivery systems has become the key factor for successful application of gene therapy. Peptide dendrimers are currently investigated as excellent candidates for non-viral gene delivery vectors. In this study, we report the synthesis and characterization of arginine functionalized peptide dendrimer-based vectors ranging from 5th generation (G5A) to 6th generation (G6A) via click chemistry, and their use for gene transfection in vitro and in vivo. The dendrimers can condense plasmid DNA (pDNA) and protect pDNAs from nuclease digestion. Both atomic force microscopy (AFM) and dynamic light scattering (DLS) revealed that the sizes of dendrimer/DNA particles were within 180-250 nm range. In vitro studies showed that the functionalized peptide dendrimers provided serum independent and high transfection efficiency on all studied cells, as over 2 fold higher than that of branched polyetherimide (PEI) in the presence of serum. Dendrimer G5A with molecular weight of 17 kDa demonstrated 6-fold transfection activity than PEI in breast tumor models, as well as good biosafety proved by in vitro and in vivo toxicity evaluation. However, G6A with molecular weight of 46 kDa showed much higher cytotoxicity. The functionalized dendrimer G5A with optimal generation may be therefore a potential candidate for gene delivery vehicle.

Tissue engineering tools for modulation of the immune response

Tissue engineering scaffolds have emerged as a powerful tool within regenerative medicine. These materials are being designed to create environments that promote regeneration through a combination of: (i) scaffold architecture, (ii) the use of scaffolds as vehicles for transplanting progenitor cells, and/or (iii) localized delivery of inductive factors or genes encoding for these inductive factors. This review describes the techniques associated with each of these components. Additionally, the immune response is increasingly recognized as a factor influencing regeneration. The immune reaction to an implant begins with an acute response to the injury and innate recognition of foreign materials, with the subsequent chronic immune response involving specific recognition of antigens (e.g., transplanted cells) by the adaptive immune response, which can eventually lead to rejection of the implant. Thus, we also describe the impact of each component on the immune response, and strategies (e.g., material design, anti-inflammatory cytokine delivery, and immune cell recruitment/transplantation) to modulate, yet not eliminate, the local immune response in order to promote regeneration, which represents another important tool for regenerative medicine.

Mussel inspired protein-mediated surface modification to electrospun fibers and their potential biomedical applications

Mussel inspired proteins have been demonstrated to serve as a versatile biologic adhesive with numerous applications. The present study illustrates the use of such Mussel inspired proteins (polydopamine) in the fabrication of functionalized bio-inspired nanomaterials capable of both improving cell response and sustained delivery of model probes. X-ray photoelectron spectroscopy analysis confirmed the ability of dopamine to polymerize on the surface of plasma-treated, electrospun poly(ε-caprolactone) (PCL) fiber mats to form polydopamine coating. Transmission electron microscopy images demonstrated that self-polymerization of dopamine was induced by pH shift and that the thickness of polydopamine coating was readily modulated by adjusting the concentration of dopamine and reaction time. Polydopamine coatings were noted to affect the mechanical properties of underlying fiber mats, as mechanical testing demonstrated a decrease in elasticity and increase in stiffness of polydopamine-coated fiber mats. Polydopamine coatings were also utilized to effectively immobilize extracellular matrix proteins (i.e., fibronectin) on the surface of polydopamine-coated, electrospun fibers, resulting in enhancement of NIH3T3 cell attachment, spreading, and cytoskeletal development. Comparison of release rates of rhodamine 6G encapsulated in coated and uncoated PCL fibers also confirmed that polydopamine coatings modulate the release rate of loaded payloads. The authors further demonstrate the significant difference of rhodamine 6G adsorption kinetics in water between PCL fibers and polydopamine-coated PCL fibers. Taken together, polydopamine-mediated surface modification to electrospun fibers may be an effective means of fabricating a wide range of bio-inspired nanomaterials with unique properties for use in tissue engineering, drug delivery, and advanced biomedical applications.

The development of non-viral gene-activated matrices for bone regeneration using polyethyleneimine (PEI) and collagen-based scaffolds

The healing potential of scaffolds for tissue engineering can be enhanced by combining them with genes to produce gene-activated matrices (GAMs) for tissue regeneration. We examined the potential of using polyethyleneimine (PEI) as a vector for transfection of mesenchymal stem cells (MSCs) in monolayer culture and in 3D collagen-based GAMs. PEI-pDNA polyplexes were fabricated at a range of N/P ratios and their optimal transfection parameters (N/P 7 ratio, 2μg dose) and transfection efficiencies (30±8%) determined in monolayer culture. The polyplexes were then loaded onto collagen, collagen-glycosaminoglycan and collagen-nanohydroxyapatite scaffolds where gene expression was observed up to 21 days with a polyplex dose as low as 2μg. Transient expression profiles indicated that the GAMs act as a polyplex depot system whereby infiltrating cells become transfected over time as they migrate throughout the scaffold. The collagen-nHa GAM exhibited the most prolonged and elevated levels of transgene expression. This research has thus demonstrated that PEI is a highly efficient pDNA transfection agent for both MSC monolayer cultures and in the 3D GAM environment. By combining therapeutic gene therapy with highly engineered scaffolds, it is proposed that these GAMs might have immense capability to promote tissue regeneration.

Advancing islet transplantation: from engraftment to the immune response

The promise and progress of islet transplantation for treating type 1 diabetes has been challenged by obstacles to patient accessibility and long-term graft function that may be overcome by integrating emerging technologies in biomaterials, drug delivery and immunomodulation. The hepatic microenvironment and traditional systemic immunosuppression stress the vulnerable islets and contribute to the limited success of transplantation. Locally delivering extracellular matrix proteins and trophic factors can enhance transplantation at extrahepatic sites by promoting islet engraftment, revascularisation and long-term function while avoiding unintended systemic effects. Cell- and cytokine-based therapies for immune cell recruitment and reprogramming can inhibit local and systemic immune system activation that normally attacks transplanted islets. Combined with antigen-specific immunotherapies, states of operational tolerance may be achievable, reducing or eliminating the long-term pharmaceutical burden. Integration of these technologies to enhance engraftment and combat rejection may help to advance the therapeutic efficacy and availability of islet transplantation.