Factors influencing osteoblast maturation on microgrooved titanium substrata

Nanofeatured surfaces in dental implants: contemporary insights and impending challenges

Dental implant therapy, established as standard-of-care nearly three decades ago with the advent of microrough titanium surfaces, revolutionized clinical outcomes through enhanced osseointegration. However, despite this pivotal advancement, challenges persist, including prolonged healing times, restricted clinical indications, plateauing success rates, and a notable incidence of peri-implantitis. This review explores the biological merits and constraints of microrough surfaces and evaluates the current landscape of nanofeatured dental implant surfaces, aiming to illuminate strategies for addressing existing impediments in implant therapy. Currently available nanofeatured dental implants incorporated nano-structures onto their predecessor microrough surfaces. While nanofeature integration into microrough surfaces demonstrates potential for enhancing early-stage osseointegration, it falls short of surpassing its predecessors in terms of osseointegration capacity. This discrepancy may be attributed, in part, to the inherent "dichotomy kinetics" of osteoblasts, wherein increased surface roughness by nanofeatures enhances osteoblast differentiation but concomitantly impedes cell attachment and proliferation. We also showcase a controllable, hybrid micro-nano titanium model surface and contrast it with commercially-available nanofeatured surfaces. Unlike the commercial nanofeatured surfaces, the controllable micro-nano hybrid surface exhibits superior potential for enhancing both cell differentiation and proliferation. Hence, present nanofeatured dental implants represent an evolutionary step from conventional microrough implants, yet they presently lack transformative capacity to surmount existing limitations. Further research and development endeavors are imperative to devise optimized surfaces rooted in fundamental science, thereby propelling technological progress in the field.

Hierarchical Surface Pattern on Ni-Free Ti-Based Bulk Metallic Glass to Control Cell Interactions

Ni-free Ti-based bulk metallic glasses (BMGs) are exciting materials for biomedical applications because of their outstanding biocompatibility and advantageous mechanical properties. The glassy nature of BMGs allows them to be shaped and patterned via thermoplastic forming (TPF). This work demonstrates the versatility of the TPF technique to create micro- and nano-patterns and hierarchical structures on Ti40Zr10Cu34Pd14Sn2 BMG. Particularly, a hierarchical structure fabricated by a two-step TPF process integrates 400 nm hexagonal close-packed protrusions on 2.5 µm square protuberances while preserving the advantageous mechanical properties from the as-cast material state. The correlations between thermal history, structure, and mechanical properties are explored. Regarding biocompatibility, Ti40Zr10Cu34Pd14Sn2 BMGs with four surface topographies (flat, micro-patterned, nano-patterned, and hierarchical-structured surfaces) are investigated using Saos-2 cell lines. Alamar Blue assay and live/dead analysis show that all tested surfaces have good cell proliferation and viability. Patterned surfaces are observed to promote the formation of longer filopodia on the edge of the cytoskeleton, leading to star-shaped and dendritic cell morphologies compared with the flat surface. In addition to potential implant applications, TPF-patterned Ti-BMGs enable a high level of order and design flexibility on the surface topography, expanding the available toolbox for studying cell behavior on rigid and ordered surfaces.

Mechanical and morphological responses of osteoblast-like cells to two-photon polymerized microgrooved surfaces

Microgrooved surfaces are recognized as an important strategy of tissue engineering to promote the alignment of bone cells. In this work, we have investigated the mechanical and morphological aspects of osteoblasts cells after interaction with different micro-structured polymeric surfaces. Femtosecond laser writing technique was used for the construction of circular and parallel microgrooved patterns in biocompatible polymeric surfaces based on pentaerythritol triacrylate. Additionally, we have studied the influence of the biocompatible TiO₂ nanocrystals (NCs) related to the cell behavior, when incorporated to the photoresin. The atomic force microscopy technique was used to investigate the biomechanical reaction of the human osteoblast-like MG-63 cells for the different microgroove. It was demonstrated that osteoblasts grown on circular microgrooved surfaces exhibited significantly larger Young's modulus compared to cells sown on flat films. Furthermore, we could observe that TiO₂ NCs improved the circular microgrooves effects, resulting in more populated sites, 34% more elongated cells, and increasing the cell stiffness by almost 160%. These results can guide the design and construction of effective scaffold surfaces with circular microgrooves for tissue engineering and bone regeneration.

Fatigue behavior of zirconia with microgrooved surfaces produced using femtosecond laser

Femtosecond laser is a promising surface treatment tool for zirconia implant. In this study, the fatigue behavior of zirconia specimens with microgrooved surfaces formed by femtosecond laser is reported. One hundred sixty CAD/CAM zirconia bars (20 mm × 4 mm × 1.4 mm) were evenly divided into four groups with different surface: as sintered; sandblasted with 110 μm Al2O3; femtosecond laser produced microgrooves having 50 μm width, 30 μm depth, and 100 μm pitch; microgrooves having 30 μm width, 20 μm depth, and 60 μm pitch. The femtosecond laser formed micro/nanostructured microgrooves with precise size on zirconia surfaces. XRD analysis indicated that microgrooved surface showed no obvious tetragonal-to-monoclinic phase transformation. The fatigue strength of sandblasted specimens (728 MPa) was significantly higher than that of as sintered specimens (570 MPa). However, the fatigue strength of specimens with microgrooved surface decreased to about 360-380 MPa. The results suggest femtosecond laser is an effective technique to regulate the surface microtopography of zirconia, while further investigations are needed to improve its fatigue behavior.

3D printed zirconia dental implants with integrated directional surface pores combine mechanical strength with favorable osteoblast response

Dental implants need to combine mechanical strength with promoted osseointegration. Currently used subtractive manufacturing techniques require a multi-step process to obtain a rough surface topography that stimulates osseointegration. Advantageously, additive manufacturing (AM) enables direct implant shaping with unique geometries and surface topographies. In this study, zirconia implants with integrated lamellar surface topography were additively manufactured by nano-particle ink-jetting. The ISO-14801 fracture load of as-sintered implants (516±39 N) resisted fatigue in 5-55°C water thermo-cycling (631±134 N). Remarkably, simultaneous mechanical fatigue and hydrothermal aging at 90°C significantly increased the implant strength to 909±280 N due to compressive stress generated at the seamless transition of the 30-40 µm thick, rough and porous surface layer to the dense implant core. This unique surface structure induced an elongated osteoblast morphology with uniform cell orientation and allowed for osteoblast proliferation, long-term attachment and matrix mineralization. In conclusion, the developed AM zirconia implants not only provided high long-term mechanical resistance thanks to the dense core along with compressive stress induced at the transition zone, but also generated a favorable osteoblast response owing to the integrated directional surface pores. STATEMENT OF SIGNIFICANCE: : Zirconia ceramics are becoming the material of choice for metal-free dental implants, however significant efforts are required to obtain a rough/porous surface for enhanced osseointegration, along with the risk of surface delamination and/or microstructure variation. In this study, we addressed the challenge by additively manufacturing implants that seamlessly combine dense core with a porous surface layer. For the first time, a unique surface with a directional lamellar pore morphology was additively obtained. This AM implant also provided strength as strong as conventionally manufactured zirconia implants before and after long-term fatigue. Favorable osteoblast response was proved by in-vitro cell investigation. This work demonstrated the opportunity to AM fabricate novel ceramic implants that can simultaneously meet the mechanical and biological functionality requirements.

[Effects of femtosecond laser treatment on surface characteristics and flexural strength of zirconia]

OBJECTIVE

To evaluate the effects of femtosecond laser treated microgrooved surface on microscopic topography, phase transformation, and three-points flexural strength of zirconia, and to provide reference for surface microstructure optimization of zirconia implant.

METHODS

According to different surface treatment methods, 57 computer aided design/computer aided manufacture (CAD/CAM) zirconia bars (20.0 mm×4.0 mm×1.4 mm) were evenly divided into three groups: sintered group, no treatment after sintering, taken as control; sandblasted group, sandblasted with 110 μm aluminium oxide (Al₂O₃) after sintering; microgrooved group, femtosecond laser fabricated microgrooves with 50 μm width, 30 μm depth, and 100 μm pitch. Surface microscopic topography was observed with scanning electron microscope (SEM) and 3D laser microscope. Further, surface roughness in each group and microgroove size were measured. Crystal phase was analyzed with X-ray diffraction. Specimens were subjected to three- points flexural strength test, and Weibull distribution was used to analyze their strength characteristics.

RESULTS

SEM showed that sintered surface was flat with clear grain structure; sandblasted surface exihibited bumps and holes with sharp margins and irregular shape; microgrooves were regularly aligned without evident defect, and nano-scale particles were observed on the surface inside of the microgrooves. Ra value of microgrooved group [(9.42±0.28)] μm was significantly higher than that of sandblasted group [(1.04±0.03) μm] and sintered group [(0.60±0.04) μm], and there was statistical difference between sandblasted group and sintered group (P < 0.001). The microgroove size was precise with (49.75±1.24) μm width, (30.85±1.02) μm depth, and (100.58±1.94) μm pitch. Crystal phase analysis showed that monoclinic volume fraction of sandblasted group (18.17%) was much higher than that of sintered group (1.55%), while microgrooved group (2.21%) was similar with sintered group. The flexural strength of sandblasted group (986.22±163.25) MPa had no statistical difference with that of sintered group (946.46±134.15) MPa (P=0.847), but the strength in microgrooved group (547.92±30.89) MPa dropped significantly compared with the other two groups (P < 0.001). Weibull modulus of sintered, sandblasted, microgrooved groups were 7.89, 6.98, and 23.46, respectively.

CONCLUSION

Femtosecond laser was able to form micro/nanostructured microgrooves on zirconia surface, which deleteriously affected the flexural strength of zirconia.

The Role of Instrumentation in the Healing Process of Spinal Tuberculosis: An Experimental Study

Introduction: Tuberculosis is still commonly found in many developing countries. Spinal tuberculosis can cause vertebral deformity and neurological disorders. It was discovered thousands years ago and its management was aimed to eradicate infection and maintain the integrity of the vertebrae. Previously, the management of spinal TB was using drugs and external stabilization. Surgical techniques were developed afterwards to clean the infected vertebral segment. Because of the vertebral deformity remained inevitable and had impacts on neurological disorders, new paradigm had been developed by using instrumentation to stabilize the deformity of infected vertebral segment and to restore and maintain neurological function. TGF-β has a major role in angiogenesis in bone healing process. Spinal TB instrumentation uses metal devices composed of ions and particles that can interact each other so it could produce physical and chemical energy that is transmitted to the vertebrae. The energy is expected to enhance the biomolecular and biocellular activity of the body's immune cells so the healing process could be better. Methods: An experimental study was carried out on New Zealand Rabbits which were given TB H37Rv strain infection in the vertebral body. Samples were divided into five groups namely control rabbits, infected rabbits without intervention, infected rabbits treated by instrumentation, infected rabbits given anti-tuberculosis drugs and infected rabbits treated by instrumentation and given drugs. Then the cytokine levels of TGF-β were evaluated and compared. Results: The results showed a significant TGF- β level increase in infected rabbits given drugs alone and instrumentation alone compared to infected rabbits without intervention. There was a significant TGF- β increase in infected rabbits given drugs and treated by instrumentation compared to control rabbits and rabbits who received drugs only. Conclusions: Instrumentation can improve the healing process in spinal tuberculosis by increasing the body's cytokine levels.

Titanium and Protein Adsorption: An Overview of Mechanisms and Effects of Surface Features

Titanium and its alloys, specially Ti6Al4V, are among the most employed materials in orthopedic and dental implants. Cells response and osseointegration of implant devices are strongly dependent on the body-biomaterial interface zone. This interface is mainly defined by proteins: They adsorb immediately after implantation from blood and biological fluids, forming a layer on implant surfaces. Therefore, it is of utmost importance to understand which features of biomaterials surfaces influence formation of the protein layer and how to guide it. In this paper, relevant literature of the last 15 years about protein adsorption on titanium-based materials is reviewed. How the surface characteristics affect protein adsorption is investigated, aiming to provide an as comprehensive a picture as possible of adsorption mechanisms and type of chemical bonding with the surface, as well as of the characterization techniques effectively applied to model and real implant surfaces. Surface free energy, charge, microroughness, and hydroxylation degree have been found to be the main surface parameters to affect the amount of adsorbed proteins. On the other hand, the conformation of adsorbed proteins is mainly dictated by the protein structure, surface topography at the nano-scale, and exposed functional groups. Protein adsorption on titanium surfaces still needs further clarification, in particular concerning adsorption from complex protein solutions. In addition, characterization techniques to investigate and compare the different aspects of protein adsorption on different surfaces (in terms of roughness and chemistry) shall be developed.

Fabrication of Superhydrophobic Ti-6Al-4V Surfaces with Single-Scale Micotextures by using Two-Step Laser Irradiation and Silanization

Laser irradiation is a popular method to produce microtextures on metal surfaces. However, the common laser-produced microtextures were hierarchical (multiscale), which may limit their applicability. In this paper, a method of two-step laser irradiation, combining first-step strong ablation and sequentially second-step gentle ablation, was presented to produce micron-rough surface with single-scale microtextures. The effect of laser fluence on the Ti-6Al-4V surface morphology and wettability were investigated in detail. The morphology results revealed that the microtextures produced using this method gradually evolved from multiscale to single-scale meanwhile from microprotrusions to microholes with increasing the second-step laser fluence from 0.0 to 2.4 J/cm². The wettability and EDS/XPS results indicated that attributing to the rich TiO₂ content and micron roughness produced by laser irradiation, all the two-step laser-irradiated surfaces exhibited superhydrophilicity. In addition, after silanization, all these superhydrophilic surfaces immediately turned to be superhydrophobic with close water contact angles of 155-162°. However, due to the absence of nanotextures, the water-rolling angle on the superhydrophobic surfaces with single-scale microtextures distinctly larger than those with multiscale ones. Finally, using the two-step laser-irradiation method and assisted with silanization, multifunctional superhydrophobic Ti-6Al-4V surfaces were achieved, including self-cleaning, guiding of the water-rolling direction and anisotropic water-rolling angles (like the rice-leaf), etc.

Enhanced physicochemical and biological properties of C/Cu dual ions implanted medical titanium

It is increasingly popular for titanium and its alloys to be utilized as the medical implants. However, their bio-inert nature and lack of antibacterial ability limit their applications. In this work, by utilizing plasma immersion ion implantation and deposition (PIII&D) technology, the titanium surface was modified by C/Cu co-implantation. The mechanical property, corrosion resistance, antibacterial ability and cytocompatibility of modified samples were studied. Results indicate that after C/Cu co-implantation, copper nanoparticles were observed on the surface of titanium, and titanium carbide existed on the near surface region of titanium. The modified surface displayed good mechanical property and corrosion resistance. The Cu/C galvanic corrosion existed on the titanium surface implanted by C/Cu dual ions, and release of copper ions can be effectively controlled by the galvanic corrosion effect. Moreover, improved antibacterial performance of titanium surface can be achieved without cytotoxicity.

Engineering High-Resolution Micropatterns Directly onto Titanium with Optimized Contact Guidance to Promote Osteogenic Differentiation and Bone Regeneration

Topographical cues play an important role in directing cell behavior, and thus, extensive research efforts have been devoted to fabrication of surface patterns and exploring the contact guidance effect. However, engineering high-resolution micropatterns directly onto metallic implants remains a grand challenge. Moreover, there still lacks evidence that allows translation of in vitro screening to in vivo tissue response. Herein, we demonstrate a fast, cost-effective, and feasible approach to the precise fabrication of shape- and size-controlled micropatterns on titanium substrates using a combination of photolithography and inductively coupled plasma-based dry etching. A titanium TopoChip containing 34 microgrooved patterns with varying geometry parameters and a flat surface as the control was designed for a high-throughput in vitro study of the contact guidance of osteoblasts. The correlation between the surface pattern dimensions, cell morphological characteristics, proliferation, and osteogenic marker expression was systematically investigated in vitro. Furthermore, the surface with the highest osteogenic potential in vitro along with representative controls was evaluated in rat cranial defect models. The results show that microgrooved pattern parameters have almost no effect on osteoblast proliferation but significantly regulate the cell morphology, orientation, focal adhesion (FA) formation, and osteogenic differentiation in vitro. In particular, a specific groove pattern with a ridge width of 3 μm, groove width of 7 μm, and depth of 2 μm can most effectively align the cells through regulating the distribution of FAs, resulting in an anisotropic actin cytoskeleton, and thereby promoting osteogenic differentiation. In vivo, microcomputed tomography and histological analyses show that the optimized pattern can apparently stimulate new bone formation. This study not only offers a microfabrication method that can be extended to fabricate various shape- and size-controlled micropatterns on titanium alloys but also provides insight into the surface structure design of orthopedic and dental implants for enhanced bone regeneration.

Osteoblast Responses to Titanium-Coated Subcellular Scaled Microgrooves

Statistical data have consistently shown that implant loosening is a significant causative factor for revision surgeries. Both in vivo and in vitro studies have confirmed the positive influences of microgrooved titanium implant surfaces on improving orthopedic titanium implants compared with a smooth titanium surface. Complete cell-groove adhesion is a prerequisite for rapid and robust osseointegration. For the first time, this work has quantified the influence of the titanium groove width at the subcellular scale (5-20 μm) on osteoblast responses, using titanium-coated microgrooved silicon wafer specimens (surface roughness, R_a = ∼1.5 nm), which can avoid the latent influence of variations in surface roughness from the use of normal titanium substrates. The cell-groove adhesion increased from 53.07% to 98.55% with an increasing groove width from 5 to 20 μm. In addition, both the cell spreading area and cell width were proportional to groove width. However, no statistically significant influence (p > 0.05) of groove width was identified on cell proliferation and differentiation. An exponential model was proposed to predict the groove geometries that can facilitate complete cell-groove adhesion. The underlying mechanisms were discussed. The experimental findings of this study provide a unique basis for the design of titanium implant surfaces.

Topographical patterning: characteristics of current processing techniques, controllable effects on material properties and co-cultured cell fate, updated applications in tissue engineering, and improvement strategies

Topographical patterning has recently attracted lots of attention in regulating cell fate, understanding the mechanism of cell–microenvironment interactions, and solving the great issues of regenerative medicine.

Promoted Angiogenesis and Osteogenesis by Dexamethasone-loaded Calcium Phosphate Nanoparticles/Collagen Composite Scaffolds with Microgroove Networks

Reconstruction of large bone defects remains a clinical challenge because current approaches involving surgery and bone grafting often do not yield satisfactory outcomes. For artificial bone substitutes, angiogenesis plays a pivotal role to achieve the final success of newly regenerated bone. In this study, dexamethasone-loaded biphasic calcium phosphate nanoparticles/collagen composite scaffolds with several types of concave microgrooves were prepared for simultaneous promotion of angiogenesis and osteogenesis. Microgrooves in the scaffolds were supposed to guide the assembly of human umbilical vascular endothelial cells (HUVECs) into well aligned tubular structures, thus promoting rapid angiogenesis. The scaffolds were used for co-culture of HUVECs and human bone marrow-derived mesenchymal stem cells. Subcutaneous implantation in mice showed that more blood vessels and newly formed bone were observed in the microgrooved composite scaffolds than in the control scaffold. Scaffold bearing parallel microgrooves with a concave width of 290 µm and a convex ridge width of 352 µm showed the highest promotion effect on angiogenesis and osteogenesis among the parallelly microgrooved composite scaffolds. The scaffolds bearing a grid network had further superior promotion effect to the scaffolds bearing parallel microgrooves. The results indicated that microgrooves in the composite scaffolds facilitated angiogenesis and stimulated new bone formation. The microgrooved composite scaffolds should be useful for repairing of large bone defects.

The Effect of Fibronectin-Immobilized Microgrooved Titanium Substrata on Cell Proliferation and Expression of Genes and Proteins in Human Gingival Fibroblasts

Background

We aimed to determine the effect of fibronectin (FN)-immobilized microgrooved titanium (Ti) on human gingival fibroblast proliferation, gene expression and protein expression.

Methods

Photolithography was used to fabricate the microgrooved Ti, and amine funtionalization (silanization) was used for FN immobilization on titanium surfaces. Cell proliferation, gene expression and protein expression were analyzed, followed by multiple regression analysis for determining the influential factors on cell proliferation.

Results

FN-immobilized microgrooved Ti significantly enhanced the fibroblast proliferation in various timelines of culture, among which a burst of fivefold increase is induced at 96 h of culture compared to that on the control smooth Ti. We suggest a presence of the synergistic promotion effect of microgrooves and FN immobilization on fibroblast proliferation. Through a series of analyses on the expression of various genes and proteins involved in cell adhesion and proliferation, cyclin-dependent kinase 6, cyclin D1, integrin α5, oncogene c-Src, osteonectin, paxillin and talin-2 were determined as influential factors on promoting fibroblast proliferation induced by FN-immobilized microgrooved Ti.

Conclusion

FN-immobilized microgrooved Ti can act as an effective surface for enhancing fibroblast proliferation, and can be used for promoting soft tissue response on the connective tissue attachment zone of biomaterial surfaces.

The effect of ordered and partially ordered surface topography on bone cell responses: a review

Current understanding of the role of ordered and partially ordered surface topography in bone cell responses for bone implant design.

Interrelationships among hydrogen permeation, physiochemical properties and early adsorption abilities of titanium

This study aimed to investigate if the titanium samples with low hydrogen permeation which treated with a novel etching combination: phosphoric acid and sodium fluoride could influence the surface physiochemical properties and early adsorption ability. Titanium samples were treated with three different concentrations of the new formula, as groups A, B and C, and treated with the traditional etching formula, as group T. Zeta potential, contact angle, X-ray photoelectron spectroscopy (XPS) and fibronectin (FN)/vitronectin (VN) adsorption of Sprague-Dawley (SD) rat tibial osteotomies in the initial 30min and MG-63 adsorption in the initial 24 h were detected. Basing on the results of trails and pearson correlation analysis, the low hydrogen permeation into titanium didn't exert an impact on the surface morphology and surface stability. The adsorptions of F, P, S, acid hydroxyl and basic hydroxyl on the surfaces brought no bear on them as well. Surface concave depth and surface skewness showed highly positive correlation and moderate negative correlation with adsorption ability, respectively. Therefore, the surface morphology of titanium treated with the novel etching formula plays the only and primary role on the early adsorption. Because of its specific surface topography, group C showed the best performance which possessed slightly superiority than those of group B and group T, and with the lowest being group A. The low hydrogen permeation into titanium substrate was just benefit for improving the titanium mechanical properties, but not for the surface biochemical traits.

An accelerated buoyancy adhesion assay combined with 3-D morphometric analysis for assessing osteoblast adhesion on microgrooved substrata

An accelerated negative buoyancy method has been developed to assess cell adhesion strength. This method has been used in conjunction with 3-D morphometric analysis to understand the effects of surface topology on cell response. Aligned micro-grooved surface topographies (with a range of groove depths) were produced on stainless steel 316L substrates by laser ablation. An investigation was carried out on the effect of the micro-grooved surface topography on cell adhesion strength, cell and nucleus volumes, cell phenotypic expression and attachment patterns. Increased hydrophobicity and anisotropic wettability was observed on surfaces with deeper grooves. A reduction was noted in cell volume, projected areas and adhesion sites for deeper grooves, linked to lower cell proliferation and differentiation rates and also to reduced adhesion strength. The results suggest that the centrifugation assay combined with three-dimensional cell morphometric analysis has considerable potential for obtaining improved understanding of the cell/substrate interface.

Effect of microgrooves and fibronectin conjugation on the osteoblast marker gene expression and differentiation

PURPOSE

To determine the effect of fibronectin (FN)-conjugated, microgrooved titanium (Ti) on osteoblast differentiation and gene expression in human bone marrow-derived mesenchymal stem cells (MSCs).

MATERIALS AND METHODS

Photolithography was used to fabricate the microgrooved Ti, and amine functionalization (silanization) was used to immobilize fibronectin on the titanium surfaces. Osteoblast differentiation and osteoblast marker gene expression were analyzed by means of alkaline phosphatase activity assay, extracellular calcium deposition assay, and quantitative real-time PCR.

RESULTS

The conjugation of fibronectin on Ti significantly increased osteoblast differentiation in MSCs compared with non-conjugated Ti substrates. On the extracellular calcium deposition assays of MSCs at 21 days, an approximately two-fold increase in calcium concentration was observed on the etched 60-µm-wide/10-µm-deep microgrooved surface with fibronectin (E60/10FN) compared with the same surface without fibronectin (E60/10), and a more than four-fold increase in calcium concentration was observed on E60/10FN compared with the non-etched control (NE0) and etched control (E0) surfaces. Through a series of analyses to determine the expression of osteoblast marker genes, a significant increase in all the marker genes except type I collagen α1 mRNA was seen with E60/10FN more than with any of the other groups, as compared with NE0.

CONCLUSION

The FN-conjugated, microgrooved Ti substrate can provide an effective surface to promote osteoblast differentiation and osteoblast marker gene expression in MSCs.

Effect of topographical control by a micro-molding process on the activity of human Mesenchymal Stem Cells on alumina ceramics

BACKGROUND

Numerous studies have reported that microgrooves on metal and polymer materials can affect cell adhesion, proliferation, differentiation and guidance. However, our knowledge of the cell activity associated with microgrooves on ceramics, such as alumina, zirconia, hydroxyapatite and etc, is very incomplete, owing to difficulties in the engraving of microgrooves on the hard surface of the base material. In this study, microgrooves on alumina were fabricated by a casting process using a polydimethylsiloxane micro-mold. The cell responses of Human Mesenchymal Stem Cells on the alumina microgrooves were then evaluated.

RESULTS

Microgrooves on an alumina surface by micro-mold casting can enhance the adhesion, differentiation of osteoblasts as well as gene expression related to osteoblast differentiation. The ALP activity and calcium concentration of the cells on alumina microgrooves were increased by more than twice compared to a non-microgrooved alumina surface. Moreover, regarding the osteoblast differentiation of hMSCs, the expression of ALP, RUNX2, OSX, OC and OPN on the microgrooved alumina were all significantly increased by 1.5 ~ 2.5 fold compared with the non-microgrooved alumina.

CONCLUSION

Altering the topography on alumina by creating microgrooves using a micro-molding process has an important impact on the behavior of hMSCs, including the adhesion, differentiation of osteoblasts and osteoblast-specific gene expression. The significant increase in hMSC activity is explained by the increasing of material transportation in parallel direction and by the extending of spreading distance in perpendicular direction.

Surface properties of nanocrystalline TiO2 coatings in relation to the in vitro plasma protein adsorption

This study reports on the selective adsorption of whole plasma proteins on hydrothermally (HT) grown TiO2-anatase coatings and its dependence on the three main surface properties: surface charge, wettability and roughness. The influence of the photo-activation of TiO2 by UV irradiation was also evaluated. Even though the protein adhesion onto Ti-based substrates was only moderate, better adsorption of any protein (at pH = 7.4) occurred for the most negatively charged and hydrophobic substrate (Ti non-treated) and for the most nanorough and hydrophilic surface (HT Ti3), indicating that the mutual action of the surface characteristics is responsible for the attraction and adhesion of the proteins. The HT coatings showed a higher adsorption of certain proteins (albumin 'passivation' layer, apolipoproteins, vitamin D-binding protein, ceruloplasmin, α-2-HS-glycoprotein) and higher ratios of albumin to fibrinogen and albumin to immunoglobulin γ-chains. The UV pre-irradiation affected the surface properties and strongly reduced the adsorption of the proteins. These results provide in-depth knowledge about the characterization of nanocrystalline TiO2 coatings for body implants and provide a basis for future studies on the hemocompatibility and biocompatibility of such surfaces.

Roles of hydroxyapatite allocation and microgroove dimension in promoting preosteoblastic cell functions on photocured polymer nanocomposites through nuclear distribution and alignment

This study clarifies how hydroxyapatite (HA) allocation and microgroove dimension affect mouse preosteoblastic MC3T3-E1 cell functions on microgrooved substrates of polymer nanocomposites. Using replica molding from micromachined silicon wafer templates, we fabricated photocured poly(ε-caprolactone) triacrylate (PCLTA)/HA nanocomposite substrates with parallel microgrooves (two groove widths of 5 and 15 μm and one groove depth of 5 μm). Four types of microgrooved substrates were made: "homogeneous" ones of PCLTA and PCLTA/HA with uniform distribution and two "heterogeneous" laminated microgrooved substrates with HA only in the PCLTA matrix in the ridges or bottom. These substrates were used to regulate MC3T3-E1 cell attachment, proliferation, alignment, nuclear circularity and distribution, and mineralization. MC3T3-E1 cell attachment and proliferation were much higher on the microgrooved substrates of PCLTA/HA than on those of PCLTA, in particular, on the 5 μm wide microgrooved substrate with PCLTA/HA ridges and PCLTA bottom. The shape and distribution of MC3T3-E1 cytoskeleton and nuclei were altered by the substrate topography and HA allocation. For 5 μm wide heterogeneous microgrooved substrates with HA only in the ridges, MC3T3-E1 cells exhibited better spreading perpendicular to the microgrooves but tended to extend along the microgrooves containing HA in the bottom. The widest cells and the roundest/largest cell nuclei were observed on the heterogeneous substrate with PCLTA/HA ridges, while the narrowest cells with the best elongation were found on the homogeneous PCLTA/HA substrate. The trend in MC3T3-E1 cell mineralization on the substrates was consistent with that in cell/nuclear elongation. Osteocalcin mRNA expression was significantly higher on the PCLTA/HA substrates than on the PCLTA ones and also on the microgrooved substrates of PCLTA/HA than on the flat ones, regardless of the groove width of 5 or 15 μm.

Effect of microgrooved surface topography on osteoblast maturation and protein adsorption

Microgrooved surfaces have been used extensively to influence cell contact guidance. Guiding cell growth, extracellular matrix deposition, and mineralization is important for bone implant longevity. In this study, we investigated the osteoblast response to microgrooved metallic surfaces in serum-supplemented medium. Groove spacing was comparable with the spread osteoblast size. Focal adhesions were observed to confine to the intervening ridge/groove boundaries. Osteoblasts bridged over the grooves and were unable to conform to the concave shape of the underlying grooves. Microgrooved surfaces induced higher osteoblast proliferation and metabolic activity after 14 days in osteogenic medium compared with as-received surfaces, resulting in higher mineralization and alignment of cell-secreted collagen after 28 days. To establish whether preferential cell attachment at the ridge/groove boundaries was influenced by the adhesion proteins contained in the serum-supplemented media, fluorescently labeled fibronectin was adsorbed onto the microgrooved substrates at low concentrations, mimicking the concentrations found in blood serum. Fibronectin was found to selectively adsorb onto the ridge/groove boundaries, the osteoblast focal adhesion sites, suggesting that protein adsorption may have influenced the cell attachment pattern.

Catechol-functionalized adhesive polymer nanoparticles for controlled local release of bone morphogenetic protein-2 from titanium surface

We report on a novel surface functionalization approach to equip the titanium (Ti) surfaces with osteogenic properties. A key feature of the approach is the treatment of the Ti surfaces with Ti-adhesive nanoparticles that can stably load and controllably release bone morphogenetic protein-2 (BMP-2). Ti-adhesive nanoparticles were prepared by self-assembly of a catechol-functionalized poly(amino acid) diblock copolymer, catechol-poly(L-aspartic acid)-b-poly(L-phenylalanine) (Cat-PAsp-PPhe). The nanoparticles consist of Ti-adhesive peripheral catechol groups, anionic PAsp shells, and PPhe inner cores. Field-emission scanning electron microscopy (Fe-SEM) images showed that the Ti-adhesive nanoparticles could be uniformly immobilized on Ti surfaces. X-ray photoelectron spectroscopy (XPS) confirmed the successful anchoring of nanoparticles onto Ti surfaces. After surface immobilization of the nanoparticles, the static water contact angle of the Ti substrate decreased from 75.3° to 50.0° or 36.4°, depending on the surface nanoparticle. Fluorescence microscopic analysis showed that BMP-2 could be effectively incorporated onto the Ti surface with adhesive nanoparticles. BMP-2 was controllably released for up to 40 days. The Ti substrate functionalized with BMP-2-incorporated nanoparticles significantly promoted attachment, proliferation, spreading, and alkaline phosphatase (ALP) activity of human adipose-derived stem cell (hADSC). The catechol-functionalized adhesive nanoparticles may be applied to various medical devices to create surfaces for improved performance.

The effect of surface microgrooves and anodic oxidation on the surface characteristics of titanium and the osteogenic activity of human periodontal ligament cells

OBJECTIVE

The purpose of this study was to investigate the effect of titanium (Ti) surface microgrooves and anodic oxidation on the surface characteristics of titanium and the osteogenic activity of human periodontal ligament cells (PLCs) cultured on theses surfaces.

DESIGN

Mechanically ground Ti was used as the control substratum (NE0). Truncated V-shaped microgrooves, 60μm-wide and 10μm-deep in cross-sections, were created on the Ti substrata by photolithography (NE60/10). Anodically oxidized Ti (NE0AO) and anodically oxidized microgrooved Ti (NE60/10AO) were also prepared. Scanning electron microscopy, X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) were performed for surface characterization. Cell proliferation assay, osteoblast differentiation assay, and quantitative real-time PCR analysis were performed to compare the osteogenic activity of PLCs on NE0, NE60/10, NEAO, and NE60/10AO.

RESULTS

A decrease in the microgroove-width of NE60/10AO compared to NE60/10 due to Ti oxide layer generation by anodic oxidation was detected with XRD and XPS. Cell proliferation, osteoblast differentiation, and osteo-related gene expression were enhanced on the NE60/10AO substrata compared with NE0, NE60/10, and NE0AO.

CONCLUSIONS

The combination of Ti surface microgrooves and subsequent anodic oxidation treatment synergistically upregulated osteo-related gene expression, despite showing limited ability to increase cell proliferation and osteoblast differentiation levels in PLCs.

The significance of differential expression of genes and proteins in human primary cells caused by microgrooved biomaterial substrata

We demonstrate that etched microgrooves, with truncated V-shape in cross-section and subsequent acid etching, on titanium substrata alter the expression of various genes and proteins in human primary cells. Etched microgrooves with 30 or 60 μm width and 10 μm depth promoted human gingival fibroblast proliferation and significantly enhanced the osteoblast differentiation of human bone marrow-derived mesenchymal stem cells and human periodontal ligament cells by inducing differential expression of various genes involved in cell adhesion, migration, proliferation, mitosis, cytoskeletal reorganization, translation initiation, vesicular trafficking, proton transportation, transforming growth factor-β signaling, mitogen-activated protein kinase signaling, simvastatin's anabolic effect on bone, inhibitory guanine nucleotide binding protein (G protein)'s action, sumoylation pathway, survival/apoptosis, mitochondrial distribution, type I collagen production, osteoblast differentiation, and bone remodeling that were verified by the differential display PCR and quantitative real-time PCR. The most influential genes on the enhancement of fibroblast proliferation or osteoblast differentiation were determined by multiple regression analysis, and the expression of relevant proteins was confirmed by western blotting and protein quantitation.

Osseointegration--communication of cells

BACKGROUND

The article provides the scientific documentation for the 3D animated film - "Osseointegration - Communication of cells".

AIM

The aim of this article and of the film is to visualise the molecular and cellular events during the healing of an osseous wound after installation of a dental implant with special emphasis on the process of osseointegration.

MATERIAL AND RESULTS

In this review article for didactic reasons the concept of the four phases of a healing soft tissue wound was transferred to a bone wound after insertion of a dental implant: haemostasis, inflammatory phase, proliferative phase and remodelling phase. Wound healing throughout these phases is the result of a coordinated action of different cell types which communicate with each other by their interaction using signalling molecules like cytokines, extracellular matrix proteins and small molecules. A regular sequence of cell types controlled by adequate concentrations of signalling molecules results in undisturbed healing. Disturbed healing is associated with a continuation of the early inflammatory phase and the development of a toxic wound environment. The latter is characterized by high counts of polymorphnuclear cells, high concentrations of toxic radicals and proteolytic enzymes and low concentrations of growth factors and extracellular matrix molecules. Clinically the development of a toxic wound environment should be avoided, e.g. by antibacterial measures.

DISCUSSION AND CONCLUSION

Experiencing implant osseointegration as a biological process may provide the clinician new targets to improve the therapy with dental implants.