Carboxyl-ebselen-based layer-by-layer films as potential antithrombotic and antimicrobial coatings

Constructing sodium alginate/carboxymethyl chitosan coating capable of catalytically releasing NO or CO for improving the hemocompatibility and endothelialization of magnesium alloys

Although significant progress in developing biodegradable magnesium alloy materials in cardiovascular stents has been achieved recently, they still face challenges such as rapid in vivo corrosion degradation, inferior blood compatibility, and limited re-endothelialization after the implantation. Hydrogel coating that can catalyze the liberation of gas signal molecules offers a good solution to alleviate the corrosion rate and enhance the biocompatibility of magnesium and its alloys. In this study, based on alkaline heat treatment and construction of polydopamine coating on the surface of magnesium alloy, sodium alginate/carboxymethyl chitosan (SA/CMCS) gel was simultaneously covalently grafted onto the surface to build a natural polymer hydrogel coating, and selenocystamine (SeCA) and CO release molecules (CORM-401) were respectively immobilized on the surface of the hydrogel coating to ameliorate the anticoagulant performance and accelerate endothelial cells (ECs) growth by catalyzing the release of endogenous gas signal molecules (NO or CO). The findings verified that the as-prepared hydrogel coating can catalyze the liberation of CO or NO and significantly improve the corrosion resistance of magnesium alloy. At the same time, owing to the excellent hydrophilicity of the hydrogel coating, the good anticoagulant property of sodium alginate, and the ability of CMCS to promote the ECs growth, the modified magnesium alloy could significantly improve the albumin adsorption while preventing the adsorption of fibrinogen, hence significantly augmenting the anticoagulant properties and promoting the ECs growth. Under the catalytic release of NO or CO, the released gas molecules further enhanced hemocompatibility and promoted endothelial cell (EC) growth and the expression of vascular endothelial growth factor (VEGF) and NO of ECs. Therefore, the bioactive coatings that can catalyze the release of NO or CO have potential applications in constructing surface bioactive coatings for magnesium alloy materials used for intravascular stents.

Catalytic Nanoparticles in Biomedical Applications: Exploiting Advanced Nanozymes for Therapeutics and Diagnostics

Catalytic nanoparticles (CNPs) as heterogeneous catalyst reveals superior activity due to their physio-chemical features, such as high surface-to-volume ratio and unique optical, electric, and magnetic properties. The CNPs, based on their physio-chemical nature, can either increase the reactive oxygen species (ROS) level for tumor and antibacterial therapy or eliminate the ROS for cytoprotection, anti-inflammation, and anti-aging. In addition, the catalytic activity of nanozymes can specifically trigger a specific reaction accompanied by the optical feature change, presenting the feasibility of biosensor and bioimaging applications. Undoubtedly, CNPs play a pivotal role in pushing the evolution of technologies in medical and clinical fields, and advanced strategies and nanomaterials rely on the input of chemical experts to develop. Herein, a systematic and comprehensive review of the challenges and recent development of CNPs for biomedical applications is presented from the viewpoint of advanced nanomaterial with unique catalytic activity and additional functions. Furthermore, the biosafety issue of applying biodegradable and non-biodegradable nanozymes and future perspectives are critically discussed to guide a promising direction in developing span-new nanozymes and more intelligent strategies for overcoming the current clinical limitations.

Balancing functions of antifouling, nitric oxide release and vascular cell selectivity for enhanced endothelialization of assembled multilayers

Surface endothelialization is a promising way to improve the hemocompatibility of biomaterials. However, current surface endothelialization strategies have limitations. For example, various surface functions are not well balanced, leading to undesirable results, especially when multiple functional components are introduced. In this work, a multifunctional surface was constructed by balancing the functions of antifouling, nitric oxide (NO) release and endothelial cell promotion via layer-by-layer (LBL) self-assembly. Poly(sodium p-styrenesulfonate-co-oligo(ethylene glycol) methacrylate) (negatively charged) and polyethyleneimine (positively charged) were deposited on silicon substrates to construct multilayers by LBL self-assembly. Then, organic selenium, which has a NO-releasing function, and the cell-adhesive peptide Gly-Arg-Glu-Asp-Val-Tyr, which selectively promotes endothelial cells, were introduced on the assembled multilayers. Poly(oligo(ethylene glycol) methacrylate) is a hydrophilic component for antifouling properties, and poly(sodium p-styrenesulfonate) is a heparin analog that provides negative charges. By modulating the contents of poly(oligo(ethylene glycol) methacrylate) and poly(sodium p-styrenesulfonate) in the copolymers, the NO release rates catalyzed by the modified surfaces were regulated. Moreover, the behaviors of endothelial cells and smooth muscle cells on modified surfaces were well controlled. The optimized surface strongly promoted endothelial cells and inhibited smooth muscle cells to achieve endothelialization effectively.

Heparin-network-mediated long-lasting coatings on intravascular catheters for adaptive antithrombosis and antibacterial infection

Bacteria-associated infections and thrombosis, particularly catheter-related bloodstream infections and catheter-related thrombosis, are life-threatening complications. Herein, we utilize a concise assembly of heparin sodium with organosilicon quaternary ammonium surfactant to fabricate a multifunctional coating complex. In contrast to conventional one-time coatings, the complex attaches to medical devices with arbitrary shapes and compositions through a facile dipping process and further forms robust coatings to treat catheter-related bloodstream infections and thrombosis simultaneously. Through their robustness and adaptively dissociation, coatings not only exhibit good stability under extreme conditions but also significantly reduce thrombus adhesion by 60%, and shows broad-spectrum antibacterial activity ( > 97%) in vitro and in vivo. Furthermore, an ex vivo rabbit model verifies that the coated catheter has the potential to prevent catheter-related bacteremia during implantation. This substrate-independent and portable long-lasting multifunctional coating can be employed to meet the increasing clinical demands for combating catheter-related bloodstream infections and thrombosis.

Biomimetic catheter surface with dual action NO-releasing and generating properties for enhanced antimicrobial efficacy

Infection of indwelling catheters is a common healthcare problem, resulting in higher morbidity and mortality. The vulnerable population reliant on catheters post-surgery for food and fluid intake, blood transfusion, or urinary incontinence or retention is susceptible to hospital-acquired infection originating from the very catheter. Bacterial adhesion on catheters can take place during the insertion or over time when catheters are used for an extended period. Nitric oxide-releasing materials have shown promise in exhibiting antibacterial properties without the risk of antibacterial resistance which can be an issue with conventional antibiotics. In this study, 1, 5, and 10 wt % selenium (Se) and 10 wt % S-nitrosoglutathione (GSNO)-incorporated catheters were prepared through a layer-by-layer dip-coating method to demonstrate NO-releasing and NO-generating capability of the catheters. The presence of Se on the catheter interface resulted in a 5 times higher NO flux in 10% Se-GSNO catheter through catalytic NO generation. A physiological level of NO release was observed from 10% Se-GSNO catheters for 5 d, along with an enhanced NO generation via the catalytic activity as Se was able to increase NO availability. The catheters were also found to be compatible and stable when subjected to sterilization and storage, even at room temperature. Additionally, the catheters showed a 97.02% and 93.24% reduction in the adhesion of clinically relevant strains of Escherichia coli and Staphylococcus aureus, respectively. Cytocompatibility testing of the catheter with 3T3 mouse fibroblast cells supports the material's biocompatibility. These findings from the study establish the proposed catheter as a prospective antibacterial material that can be translated into a clinical setting to combat catheter-related infections.

Antibacterial-Based Hydrogel Coatings and Their Application in the Biomedical Field-A Review

Hydrogels exhibit excellent moldability, biodegradability, biocompatibility, and extracellular matrix-like properties, which make them widely used in biomedical fields. Because of their unique three-dimensional crosslinked hydrophilic networks, hydrogels can encapsulate various materials, such as small molecules, polymers, and particles; this has become a hot research topic in the antibacterial field. The surface modification of biomaterials by using antibacterial hydrogels as coatings contributes to the biomaterial activity and offers wide prospects for development. A variety of surface chemical strategies have been developed to bind hydrogels to the substrate surface stably. We first introduce the preparation method for antibacterial coatings in this review, which includes surface-initiated graft crosslinking polymerization, anchoring the hydrogel coating to the substrate surface, and the LbL self-assembly technique to coat crosslinked hydrogels. Then, we summarize the applications of hydrogel coating in the biomedical antibacterial field. Hydrogel itself has certain antibacterial properties, but the antibacterial effect is not sufficient. In recent research, in order to optimize its antibacterial performance, the following three antibacterial strategies are mainly adopted: bacterial repellent and inhibition, contact surface killing of bacteria, and release of antibacterial agents. We systematically introduce the antibacterial mechanism of each strategy. The review aims to provide reference for the further development and application of hydrogel coatings.

Roles and current applications of S-nitrosoglutathione in anti-infective biomaterials

Bacterial infections can compromise the physical and biological functionalities of humans and pose a huge economical and psychological burden on infected patients. Nitric oxide (NO) is a broad-spectrum antimicrobial agent, whose mechanism of action is not affected by bacterial resistance. S-nitrosoglutathione (GSNO), an endogenous donor and carrier of NO, has gained increasing attention because of its potent antibacterial activity and efficient biocompatibility. Significant breakthroughs have been made in the application of GSNO in biomaterials. This review is based on the existing evidence that comprehensively summarizes the progress of antimicrobial GSNO applications focusing on their anti-infective performance, underlying antibacterial mechanisms, and application in anti-infective biomaterials. We provide an accurate overview of the roles and applications of GSNO in antibacterial biomaterials and shed new light on the avenues for future studies.

Layer-by-layer assembly methods and their biomedical applications

Various biomedical applications arising due to the development of different LbL assembly methods with unique process properties.

Photothermal and Enhanced Photocatalytic Therapies Conduce to Synergistic Anticancer Phototherapy with Biodegradable Titanium Diselenide Nanosheets

Nanomaterial-based photothermal and photocatalytic therapies are effective against various types of cancers. However, combining two or more materials is considered necessary to achieve the synergistic anticancer effects of photothermal and photocatalytic therapy, which made the preparation process complicated. Herein, the authors describe simple 2D titanium diselenide (TiSe₂ ) nanosheets (NSs) that can couple photothermal therapy with photocatalytic therapy. The TiSe₂ NSs are prepared using a liquid exfoliation method. They show a layered structure and possess high photothermal conversion efficiency (65.58%) and good biocompatibility. Notably, upon near-infrared irradiation, these NSs exhibit good photocatalytic properties with enhanced reactive oxygen species generation and H₂ O₂ decomposition in vitro. They can also achieve high temperatures, with heat improving their catalytic ability to further amplify oxidative stress and glutathione depletion in cancer cells. Furthermore, molecular mechanism studies reveal that the synergistic effects of photothermal and enhanced photocatalytic therapy can simultaneously lead to apoptosis and necrosis in cancer cells via the HSP90/JAK3/NF-κB/IKB-α/Caspase-3 pathway. Systemic exploration reveals that the TiSe₂ NSs has an appreciable degradation rate and accumulates passively in tumor tissue, where they facilitate photothermal and photocatalytic effects without obvious toxicity. Their study thus indicates the high potential of biodegradable TiSe₂ NSs in synergistic phototherapy for cancer treatment.

Combination strategies for antithrombotic biomaterials: an emerging trend towards hemocompatibility

Surface-induced thrombosis is a frequent, critical issue for blood-contacting medical devices that poses a serious threat to patient safety and device functionality. Antithrombotic material design strategies including the immobilization of anticoagulants, alterations in surface chemistries and morphology, and the release of antithrombotic compounds have made great strides in the field with the ultimate goal of circumventing the need for systemic anticoagulation, but have yet to achieve the same hemocompatibility as the native endothelium. Given that the endothelium achieves this state through the use of many mechanisms of action, there is a rising trend in combining these established design strategies for improved antithrombotic actions. Here, we describe this emerging paradigm, highlighting the apparent advantages of multiple antithrombotic mechanisms of action and discussing the demonstrated potential of this new direction.

Antibacterial hydrogel coating: Strategies in surface chemistry

Hydrogels have emerged as promising antimicrobial materials due to their unique three-dimensional structure, which provides sufficient capacity to accommodate various materials, including small molecules, polymers and particles. Coating substrates with antibacterial hydrogel layers has been recognized as an effective strategy to combat bacterial colonization. To prevent possible delamination of hydrogel coatings from substrates, it is crucial to attach hydrogel layers via stronger links, such as covalent bonds. To date, various surface chemical strategies have been developed to introduce hydrogel coatings on different substrates. In this review, we first give a brief introduction of the major strategies for designing antibacterial coatings. Then, we summarize the chemical methods used to fix the antibacterial hydrogel layer on the substrate, which include surface-initiated graft crosslinking polymerization, anchoring the hydrogel layer on the surface during crosslinking, and chemical crosslinking of layer-by-layer coating. The reaction mechanisms of each method and matched pretreatment strategies are systemically documented with the aim of introducing available protocols to researchers in related fields for designing hydrogel-coated antibacterial surfaces.

3,3'-Diselenodipropionic acid (DSePA): A redox active multifunctional molecule of biological relevance

BACKGROUND

Extensive research is being carried out globally to design and develop new selenium compounds for various biological applications such as antioxidants, radio-protectors, anti-carcinogenic agents, biocides, etc. In this pursuit, 3,3'-diselenodipropionic acid (DSePA), a synthetic organoselenium compound, has received considerable attention for its biological activities.

SCOPE OF REVIEW

This review intends to give a comprehensive account of research on DSePA so as to facilitate further research activities on this organoselenium compound and to realize its full potential in different areas of biological and pharmacological sciences.

MAJOR CONCLUSIONS

It is an interesting diselenide structurally related to selenocystine. It shows moderate glutathione peroxidase (GPx)-like activity and is an excellent scavenger of reactive oxygen species (ROS). Exposure to radiation, as envisaged during radiation therapy, has been associated with normal tissue side effects and also with the decrease in selenium levels in the body. In vitro and in vivo evaluation of DSePA has confirmed its ability to reduce radiation induced side effects into normal tissues. Administration of DSePA through intraperitoneal (IP) or oral route to mice in a dose range of 2 to 2.5 mg/kg body weight has shown survival advantage against whole body irradiation and a significant protection to lung tissue against thoracic irradiation. Pharmacokinetic profiling of DSePA suggests its maximum absorption in the lung.

GENERAL SIGNIFICANCE

Research work on DSePA reported in fifteen years or so indicates that it is a promising multifunctional organoselenium compound exhibiting many important activities of biological relevance apart from radioprotection.

Release-killing properties of a textile modified by a layer-by-layer coating based on two oppositely charged cyclodextrin polyelectrolytes

Infections represent a major medical concern and have severe impact on the public health economy. Antimicrobial coatings represent one major solution and are the subject of many investigations in academic and industrial research. Polyelectrolyte multilayers (PEMs) consist in the step-by-step deposition of polyanions and polycations films on surfaces. The wide range of disposable polyelectrolytes makes this approach among the most versatile methods as it allows to design surfaces that prevent bacterial adhesion, and kill bacteria by contact or by releasing antibacterial agents. The present work focused on the release-killing effect of an active PEM coating of a polyethylene terephthalate (PET) textile support. This activity was obtained thanks to the PEM film build up using cationic and anionic polyelectrolytes both based on cyclodextrins (PCD- and PCD+) that provided a reservoir property and prolonged release of triclosan (TCS). To this effect, a PET non-woven preliminarily modified with carboxylate groups by applying a thermofixation process was then treated by dip-coating, alternating soaking cycles in cationic PCD+ and in anionic PCD- solutions. Samples coated with such PEM film were then loaded with TCS whose release was assessed in dynamic mode in a phosphate buffered saline solution (PBS) at 37 °C. In parallel, TCS/PCD+ and TCS/PCD- interactions were investigated by Nuclear Magnetic Resonance (NMR) and phase solubility study, and the biocide activity was assessed against S. aureus and E. coli. Finally, the present study has demonstrated that our PCD+/PCD- PEM system presented release-killing properties that supplement the contact-killing effect of this system that was reported in a previous paper.

Enzyme Mimics for the Catalytic Generation of Nitric Oxide from Endogenous Prodrugs

The highly diverse biological roles of nitric oxide (NO) in both physiological and pathophysiological processes have prompted great interest in the use of NO as a therapeutic agent in various biomedical applications. NO can exert either protective or deleterious effects depending on its concentration and the location where it is delivered or generated. This double-edged attribute, together with the short half-life of NO in biological systems, poses a major challenge to the realization of the full therapeutic potential of this molecule. Controlled release strategies show an admirable degree of precision with regard to the spatiotemporal dosing of NO but are disadvantaged by the finite NO deliverable payload. In turn, enzyme-prodrug therapy techniques afford enhanced deliverable payload but are troubled by the inherent low stability of natural enzymes, as well as the requirement to control pharmacokinetics for the exogenous prodrugs. The past decade has seen the advent of a new paradigm in controlled delivery of NO, namely localized bioconversion of the endogenous prodrugs of NO, specifically by enzyme mimics. These early developments are presented, successes of this strategy are highlighted, and possible future work on this avenue of research is critically discussed.

Selenium Donors at the Junction of Inflammatory Diseases

Selenium is an essential non-metal trace element, and the imbalance in the bioavailability of selenium is associated with many diseases ranking from acute respiratory distress syndrome, myocardial infarction and renal failure (Se overloading) to diseases associated with chronic inflammation like inflammatory bowel diseases, rheumatoid arthritis, and atherosclerosis (Se unload). The only source of selenium is the diet (animal and cereal sources) and its intestinal absorption is limiting for selenocysteine and selenomethionine synthesis and incorporation in selenoproteins. In this review, after establishing the link between selenium and inflammatory diseases, we envisaged the potential of selenium nanoparticles and organic selenocompounds to compensate the deficit of selenium intake from the diet. With high selenium loading, nanoparticles offer a low dosage to restore selenium bioavailability whereas organic selenocompounds can play a role in the modulation of their antioxidant or antiinflammatory activities.

Nitric Oxide-Releasing Polymeric Materials for Antimicrobial Applications: A Review

Polymeric materials releasing nitric oxide have attracted significant attention for therapeutic use in recent years. As one of the gaseous signaling agents in eukaryotic cells, endogenously generated nitric oxide (NO) is also capable of regulating the behavior of bacteria as well as biofilm formation in many metabolic pathways. To overcome the drawbacks caused by the radical nature of NO, synthetic or natural polymers bearing NO releasing moiety have been prepared as nano-sized materials, coatings, and hydrogels. To successfully design these materials, the amount of NO released within a certain duration, the targeted pathogens and the trigger mechanisms upon external stimulation with light, temperature, and chemicals should be taken into consideration. Meanwhile, NO donors like S-nitrosothiols (RSNOs) and N-diazeniumdiolates (NONOates) have been widely utilized for developing antimicrobial polymeric agents through polymer-NO donor conjugation or physical encapsulation. In addition, antimicrobial materials with visible light responsive NO donor are also reported as strong and physiological friendly tools for rapid bacterial clearance. This review highlights approaches to delivery NO from different types of polymeric materials for combating diseases caused by pathogenic bacteria, which hopefully can inspire researchers facing common challenges in the coming 'post-antibiotic' era.

Micelle-embedded coating with ebselen for nitric oxide generation

Nitric oxide generation is considered to be a key factor to mimic endothelial function in terms of anti-coagulation and anti-hyperplasia. Herein, ebselen which could play the similar role as glutathion peroxidase-like was loaded into micelles and was further assembled into a layer-by-layer coating. The ability of nitric oxide generation and corresponding biological effect were investigated. Endothelial-mimetic surface has now attracted huge attention in blood-contacting materials, due to its inherent ability of secreting nitric oxide. Among those categories, nitric oxide generation surface is considered to be safe and tunable in the modification of vascular biomedical devices. How to adsorb or immobilize glutathion peroxidase-like catalyst and maintain sustained/safe nitric oxide generation is full of interest. This study aimed at developing a functional coating constructed via layer-by-layer assembly to introduce the catalyst into the coating by pre-loading ebselen in micelles. We firstly introduced phenylboronic acid moiety into the micelle molecule backbone and grafted catechol moiety to chitosan backbone. Then, chitosan, micelles (containing ebselen) and heparin were adopted as polyelectrolytes and then alternatively assembled onto the substrate via layer-by-layer protocol. The catechol was conjugated to the amine groups of chitosan by Schiff base reaction to synthesize chitosan-catechol. The hydrophobic cholesterol was conjugated to the one end of the hydrophilic hyaluronic acid, and the hydroxymethylphenylboronic acid was conjugated to the other end via the esterification of carboxyl (-COOH) and hydroxyl (-OH). The modified hyaluronic acid could spontaneously form micelles in aqueous solution. Ebselen was the loaded into the as-prepared micelles. Chitosan-catechol, heparin, and micelles were alternatively assembled onto the substrate layer by layer to form a micelle-embedded coating. The micelle-embedded coating with ebselen was successfully obtained and the nitric oxide generation ability was in a safe level which was close to healthy endothelial cells. The coating could effectively inhibit platelet adhesion and smooth muscle cell proliferation. The use of ebselen preloaded into micelles could provide a sustained release of catalyst for in situ nitric oxide generation. Besides, this method could also be used to load diverse drugs and regulate desired properties. The study was approved by the Institutional Review Board of the West China Hospital in Sichuan University on March 3, 2018, with approval No. K2018044.

Multifunctional S-Nitroso-N-acetylpenicillamine-Incorporated Medical-Grade Polymer with Selenium Interface for Biomedical Applications

Modern crises in implantable or indwelling blood-contacting medical devices are mainly due to the dual problems of infection and thrombogenicity. There is a paucity of biomaterials that can address both problems simultaneously through a singular platform. Taking cues from the body's own defense mechanism against infection and blood clotting (thrombosis) via the endogenous gasotransmitter nitric oxide (NO), both of these issues are addressed through the development of a layered S-nitroso-N-acetylpenicillamine (SNAP)-doped polymer with a blended selenium (Se)-polymer interface. The unique capability of the SNAP-Se-1 polymer composites to explicitly release NO from the SNAP reservoir as well as generate NO via the incorporated Se is reported for the first time. The NO release from the SNAP-doped polymer increased substantially in the presence of the Se interface. The Se interface was able to generate NO in the presence of S-nitrosoglutathione (GSNO) and glutathione (GSH), demonstrating the capability of generating NO from endogenous S-nitrosothiols (RSNO). Scanning electron microscopy-energy dispersive spectroscopy (SEM-EDS) traced distribution of elemental Se nanoparticles on the interface and the surface properties were evaluated by surface wettability and roughness. The SNAP-Se-1 efficiently inhibited the growth of bacteria and reduced platelet adhesion while showing minimal cytotoxicity, thus potentially eliminating the risks of systemic antibiotic and blood coagulation therapy. The SNAP-Se-1 exhibited antibacterial activity of ∼2.39 and ∼2.25 log reductions in the growth of clinically challenging adhered Gram-positive Staphylococcus aureus and Gram-negative Escherichia coli. SNAP-Se-1 also significantly reduced platelet adhesion by 85.5% compared to corresponding controls. A WST-8-based cell viability test performed on NIH 3T3 mouse fibroblast cells provided supporting evidence for the potential biocompatibility of the material in vitro. These results highlight the prospective utility of SNAP-Se-1 as a blood-contacting infection-resistant biomaterial in vitro which can be further tuned by application specificity.

Nanozymes: Classification, Catalytic Mechanisms, Activity Regulation, and Applications

Because of the high catalytic activities and substrate specificity, natural enzymes have been widely used in industrial, medical, and biological fields, etc. Although promising, they often suffer from intrinsic shortcomings such as high cost, low operational stability, and difficulties of recycling. To overcome these shortcomings, researchers have been devoted to the exploration of artificial enzyme mimics for a long time. Since the discovery of ferromagnetic nanoparticles with intrinsic horseradish peroxidase-like activity in 2007, a large amount of studies on nanozymes have been constantly emerging in the next decade. Nanozymes are one kind of nanomaterials with enzymatic catalytic properties. Compared with natural enzymes, nanozymes have the advantages such as low cost, high stability and durability, which have been widely used in industrial, medical, and biological fields. A thorough understanding of the possible catalytic mechanisms will contribute to the development of novel and high-efficient nanozymes, and the rational regulations of the activities of nanozymes are of great significance. In this review, we systematically introduce the classification, catalytic mechanism, activity regulation as well as recent research progress of nanozymes in the field of biosensing, environmental protection, and disease treatments, etc. in the past years. We also propose the current challenges of nanozymes as well as their future research focus. We anticipate this review may be of significance for the field to understand the properties of nanozymes and the development of novel nanomaterials with enzyme mimicking activities.

Selenium-containing polyurethane with elevated catalytic stability for sustained nitric oxide release

Stable and controllable nitric oxide (NO) release at the physiological level from biomedical materials remains a challenge for NO-based therapy. NO-generating polymers have great potential to achieve this goal because they can catalytically decompose endogenous S-nitrosothiols (RSNOs) into NO. However, the current catalytic surfaces based on such polymers often suffer from loss of catalytic sites, which can influence the stability of NO release in their long-term application. In this work, we proposed a novel strategy to enhance the catalytic stability of NO-catalytic materials by incorporating catalytic sites into the polymer backbone. Selenium-containing polyurethane (PU-Se) was synthesized by using the catalyst 2,2'-diselenodiethanol (SeDO) as the chain extender. A series of PU/PU-Se blend films were prepared to investigate the effect of PU-Se content on the catalytic properties. The blend films exhibited excellent catalytic activity, and also showed outstanding catalytic stability in comparison with PU coated by diselenide/dopamine (PU-PDA-Se). Among these blend films, PU-Se-10 exhibited a stable NO release rate of 5.05 × 10^-10 mol cm^-2 min^-1 after exposure to PBS buffer for 30 days. Moreover, the PU/PU-Se films exhibited decreased platelet activation/adhesion, low hemolysis ratio, excellent biocompatibility, and similar mechanical properties to PU. It is expected that the newly designed PU-Se has great potential in generating stable NO release at the physiological level for the long-term application of blood-contacting medical devices.

Molecular identification and structural characterization of marine endophytic actinomycetes Nocardiopsis sp. GRG 2 (KT 235641) and its antibacterial efficacy against isolated ESBL producing bacteria

The present study was designed to identify the potential bioactive compound from endophytic actinomycetes (EA) Nocardiopsis sp. GRG 2 (KT 235641) against selected extended spectrum beta lactamase (ESBL) producing Pseudomonas aeruginosa (P. aeruginosa) and Klebsiella pneumoniae (K. pneumoniae). Initially, the multi drug resistance (MDR) effect of selected uropathogens was confirmed by respective UTI panel of Hexa antibiotics disc methods. The zone of inhibition ≤22 mm for ceftazidime, ≤ 27 mm for cefotaxime and ≤8 mm zone of MIC stripe against both the uropathogens of phenotypic methods confirmed, the selected strains were ESBL producer. Among the various EA extracts, GRG 2 extract showed excellent antibacterial activity against both ESBL producing P. aeruginosa and K. pneumonia by agar well diffution method. The molecular identification of selected GRG 2 strain was named as Nocardiopsis sp. GRG 2 (KT235641). The antibacterial metabolites present in the TLC elution was exhibited at 274 nm by UV visible spectrometer. The partial purification of preparative HPLC fraction 3 showed 14, 16 mm against P. aeruginosa and K. pneumoniae, respectively. Based on the antibacterial effect, the FT-IR, GC-MS and LC-MS analysis of fraction 3 was confirmed as 1, 4-diaza-2, 5-dioxo-3-isobutyl bicyclo[4.3.0]nonane (DDIBN). Further, the dose dependent inhibition of DDIBN against both ESBL producing pathogens was observed at 75 μg/mL by minimum inhibition concentration (MIC) and minimum bactericidal concentration (MBC). The increased cell death and disrupted cell membrane integrity were observed at MIC of DDIBN by confocal laser scanning electron microscope (CLSM) and scanning electron microscope (SEM). The results were proved that the DDIBN has potential antibacterial metabolites against ESBL producing pathogens and it can be applied for various other biomedical fields.

Plant-inspired gallolamine catalytic surface chemistry for engineering an efficient nitric oxide generating coating

A novel concept of generating therapeutic gas, nitric oxide (NO) via catalytic phenolic-amine "gallolamine" surface chemistry is developed. The concept is realized using plant polyphenol, gallic acid, and a glutathione peroxidase-like organoselenium compound cystamine or selenocystamine through one-step phenol-amine molecular assembling process. The resulting NO-generating coating with phenolic-cystamine or -selenocystamine framework showed the ability for long-term, steady and controllable range of NO release rates being unparalleled with any existing NO-releasing or NO-generating surface engineering toolkits.

STATEMENT OF SIGNIFICANCE

Developing a facile and versatile strategy for a NO-generating coating with long-term, stable and adjustable NO release is of great interest for the application of blood-contacting materials and devices. Covalent immobilization of glutathione peroxidase (GPx)-like compound to generate NO from a material surface by exposure of endogenously existed S-nitrothiol (RSNO) is a popular strategy. However, it is generally involved in multi-step and complicated processes. Moreover, the amount of immobilized GPx-like compounds is limited by the density of introduced reactive functional groups on a surface. Herein, we propose a novel concept of catalytic plant-inspired gallolamine surface chemistry for material-independent NO-generating coatings. The concept is realized using plant polyphenol, gallic acid, and a GPx-like organoselenium compound cystamine or selenocystamine through one-step phenol-amine molecular assembling process. Without tedious multi-step synthesis, complicated surface treatments, and leakage of toxic chemicals, our unprecedentedly simple, histocompatible and biocompatible phenolic-cystamine or -selenocystamine framework demonstrated long-term, on-demand and facile dose controls of NO generated from the engineering surfaces. These unique features of such a NO-generating coating imparted a material with ability to impressively improve anti-thrombogenicity in vivo. This work constitutes the first report of an interfacial catalytic coating based on material-independent surface chemistry by plant polyphenols. This concept not only expands the application of material-independent surface chemistry in an interfacial catalytic area, but also can be a new platform for antithrombotic materials.

Covalent layer-by-layer films: chemistry, design, and multidisciplinary applications

Covalent layer-by-layer (LbL) assembly is a powerful method used to construct functional ultrathin films that enables nanoscopic structural precision, componential diversity, and flexible design. Compared with conventional LbL films built using multiple noncovalent interactions, LbL films prepared using covalent crosslinking offer the following distinctive characteristics: (i) enhanced film endurance or rigidity; (ii) improved componential diversity when uncharged species or small molecules are stably built into the films by forming covalent bonds; and (iii) increased structural diversity when covalent crosslinking is employed in componential, spacial, or temporal (labile bonds) selective manners. In this review, we document the chemical methods used to build covalent LbL films as well as the film properties and applications achievable using various film design strategies. We expect to translate the achievement in the discipline of chemistry (film-building methods) into readily available techniques for materials engineers and thus provide diverse functional material design protocols to address the energy, biomedical, and environmental challenges faced by the entire scientific community.

Micropatterned biodegradable polyesters clicked with CQAASIKVAV promote cell alignment, directional migration, and neurite outgrowth

The interplay of microstructures and biological cues is critical to regulate the behaviors of Schwann cells (SCs) in terms of cellular spatial arrangement and directional migration as well as neurite orientation for bridging the proximal and distal stumps of the injured peripheral nervous system. In this study, stripe micropatterns having ridges/grooves of width 20/20 and 20/40 μm were fabricated on the surface of maleimide-functionalized biodegradable poly(ester carbonate) (P(LLA-MTMC)) films by the polydimethylsiloxane mold-pressing method, respectively. The laminin-derived CQAASIKVAV peptides end-capped with an SH group were then grafted by the thiol-ene click reaction under mild conditions to obtain micropatterned and peptide-grafted films. SCs cultured on these films, especially on the 20/40-μm film, displayed faster and aligned adhesion as well as a larger number of elongated cells with a higher length-to-width (L/W) ratio along the stripe direction than those on the flat-pep film. The migration rate of SCs was significantly enhanced in parallel to the stripe direction with a large net displacement. The micropatterned and peptide-grafted films, especially the 20/40-μm film, could promote SC proliferation and nerve growth factor (NGF) secretion in a manner similar to that of the peptide-grafted planar film. Moreover, the neurites of rat pheochromocytoma 12 (PC12) cells sprouted along the ridges with a longer average length on the micropatterned and peptide-grafted films. The synergistic effect of physical patterns and biological cues was evaluated by considering the results of cell adhesion force; immunofluorescence staining of vinculin; fluorescence staining of F-actin and the nucleus; as well as gene expression of neural cadherin (NCAD), neurocan (NCAN), and myelin protein zero (P0).

STATEMENT OF SIGNIFICANCE

The interplay of microstructures and biological cues is critical to regulate the behaviors of Schwann cells (SCs) and nerve cells, and thereby the regeneration of peripheral nerve system. In this study, the combined micropatterning and CQAASIKVAV grafting endowed the modified P(LLA-MTMC) films with both contact guidance and bioactive chemical cues to enhance cell proliferation, directional alignment and migration, longer net displacement and larger NGF secretion, and stronger neurite outgrowth of SCs and PC12 cells. Hence, the integration of physical micropatterns and bioactive molecules is an effective way to obtain featured biomaterials for the regeneration of nerves and other types of tissues.

Ebselen exerts antifungal activity by regulating glutathione (GSH) and reactive oxygen species (ROS) production in fungal cells

BACKGROUND

Ebselen, an organoselenium compound and a clinically safe molecule has been reported to possess potent antifungal activity, but its antifungal mechanism of action and in vivo antifungal activity remain unclear.

METHODS

The antifungal effect of ebselen was tested against Candida albicans, C. glabrata, C. tropicalis, C. parapsilosis, Cryptococcus neoformans, and C. gattii clinical isolates. Chemogenomic profiling and biochemical assays were employed to identify the antifungal target of ebselen. Ebselen's antifungal activity in vivo was investigated in a Caenorhabditis elegans animal model.

RESULTS

Ebselen exhibits potent antifungal activity against both Candida spp. and Cryptococcus spp., at concentrations ranging from 0.5 to 2μg/ml. Ebselen rapidly eradicates a high fungal inoculum within 2h of treatment. Investigation of the drug's antifungal mechanism of action indicates that ebselen depletes intracellular glutathione (GSH) levels, leading to increased production of reactive oxygen species (ROS), and thereby disturbs the redox homeostasis in fungal cells. Examination of ebselen's in vivo antifungal activity in two Caenorhabditis elegans models of infection demonstrate that ebselen is superior to conventional antifungal drugs (fluconazole, flucytosine and amphotericin) in reducing Candida and Cryptococcus fungal load.

CONCLUSION

Ebselen possesses potent antifungal activity against clinically relevant isolates of both Candida and Cryptococcus by regulating GSH and ROS production. The potent in vivo antifungal activity of ebselen supports further investigation for repurposing it for use as an antifungal agent.

GENERAL SIGNIFICANCE

The present study shows that ebselen targets glutathione and also support that glutathione as a potential target for antifungal drug development.

Recent advances in thromboresistant and antimicrobial polymers for biomedical applications: just say yes to nitric oxide (NO)

Biomedical devices are essential for patient diagnosis and treatment; however, when blood comes in contact with foreign surfaces or homeostasis is disrupted, complications including thrombus formation and bacterial infections can interrupt device functionality, causing false readings and/or shorten device lifetime. Here, we review some of the current approaches for developing antithrombotic and antibacterial materials for biomedical applications. Special emphasis is given to materials that release or generate low levels of nitric oxide (NO). Nitric oxide is an endogenous gas molecule that can inhibit platelet activation as well as bacterial proliferation and adhesion. Various NO delivery vehicles have been developed to improve NO's therapeutic potential. In this review, we provide a summary of the NO releasing and NO generating polymeric materials developed to date, with a focus on the chemistry of different NO donors, the polymer preparation processes, and in vitro and in vivo applications of the two most promising types of NO donors studied thus far, N-diazeniumdiolates (NONOates) and S-nitrosothiols (RSNOs).

Biomimetic Extracellular Environment Based on Natural Origin Polyelectrolyte Multilayers

Surface modification of biomaterials is a well-known approach to enable an adequate biointerface between the implant and the surrounding tissue, dictating the initial acceptance or rejection of the implantable device. Since its discovery in early 1990s layer-by-layer (LbL) approaches have become a popular and attractive technique to functionalize the biomaterials surface and also engineering various types of objects such as capsules, hollow tubes, and freestanding membranes in a controllable and versatile manner. Such versatility enables the incorporation of different nanostructured building blocks, including natural biopolymers, which appear as promising biomimetic multilayered systems due to their similarity to human tissues. In this review, the potential of natural origin polymer-based multilayers is highlighted in hopes of a better understanding of the mechanisms behind its use as building blocks of LbL assembly. A deep overview on the recent progresses achieved in the design, fabrication, and applications of natural origin multilayered films is provided. Such films may lead to novel biomimetic approaches for various biomedical applications, such as tissue engineering, regenerative medicine, implantable devices, cell-based biosensors, diagnostic systems, and basic cell biology.

Electrochemically Modulated Nitric Oxide Release From Flexible Silicone Rubber Patch: Antimicrobial Activity For Potential Wound Healing Applications

Herein, we report a novel design and the antimicrobial efficacy of a flexible nitric oxide (NO) releasing patch for potential wound healing applications. The compact sized polydimethylsiloxane (PDMS) planar patch generates NO via electrochemical reduction of nitrite ions mediated by a copper(II)-ligand catalyst using a portable power system and an internal gold coated stainless steel mesh working electrode. Patches are fabricated via soft lithography and 3-D printing. The devices can continuously release NO over 4 days and exhibit potent bactericidal effects on both Escherichia coli and Staphylococcus aureus. The device may provide an effective, safe, and less costly alternative for treating chronic wounds.

Integration of molecular and enzymatic catalysts on graphene for biomimetic generation of antithrombotic species

The integration of multiple synergistic catalytic systems can enable the creation of biocompatible enzymatic mimics for cascading reactions under physiologically relevant conditions. Here we report the design of a graphene-haemin-glucose oxidase conjugate as a tandem catalyst, in which graphene functions as a unique support to integrate molecular catalyst haemin and enzymatic catalyst glucose oxidase for biomimetic generation of antithrombotic species. Monomeric haemin can be conjugated with graphene through π-π interactions to function as an effective catalyst for the oxidation of endogenous L-arginine by hydrogen peroxide. Furthermore, glucose oxidase can be covalently linked onto graphene for local generation of hydrogen peroxide through the oxidation of blood glucose. Thus, the integrated graphene-haemin-glucose oxidase catalysts can readily enable the continuous generation of nitroxyl, an antithrombotic species, from physiologically abundant glucose and L-arginine. Finally, we demonstrate that the conjugates can be embedded within polyurethane to create a long-lasting antithrombotic coating for blood-contacting biomedical devices.

Construction and evaluation of nitric oxide generating vascular graft material loaded with organoselenium catalyst via layer-by-layer self-assembly

A new biomimetic material for artificial blood vessel with in situ catalytic generation of nitric oxide (NO) was prepared in this study. Organoselenium immobilized polyethyleneimine as NO donor catalyst and sodium alginate were alternately loaded onto the surface of electrospun polycaprolactone matrix via electrostatic layer-by-layer self-assembly. This material revealed significant NO generation when contacting NO donor S-nitrosoglutathione (GSNO). Adhesion and spreading of smooth muscle cells were inhibited on this material in the presence of GSNO, while proliferation of endothelial cells was promoted. In vitro platelet adhesion and arteriovenous shunt experiments demonstrated good antithrombotic properties of this material, with inhibited platelet activation and aggregation, and prevention of acute thrombosis. This study may provide a new method of improving cellular function and antithrombotic property of vascular grafts.

S-Nitroso-N-acetylpenicillamine (SNAP) Impregnated Silicone Foley Catheters: A Potential Biomaterial/Device To Prevent Catheter-Associated Urinary Tract Infections

Urinary Foley catheters are utilized for management of hospitalized patients and are associated with high rates of urinary tract infections (UTIs). Nitric oxide (NO) potently inhibits microbial biofilm formation, which is the primary cause of catheter associated UTIs (CAUTIs). Herein, commercial silicone Foley catheters are impregnated via a solvent swelling method with S-nitroso-N-acetyl-D-penicillamine (SNAP), a synthetic NO donor that exhibits long-term NO release and stability when incorporated into low water-uptake polymers. The proposed catheters generate NO surface-fluxes >0.7 × 10^–10 mol min^–1 cm^–2 for over one month under physiological conditions, with minimal SNAP leaching. These biomedical devices are demonstrated to significantly decrease formation of biofilm on the surface of the catheter tubings over 3, 7, and 14 day periods by microbial species (Staphylococcus epidermidis and Proteus mirabilis) commonly causing CAUTIs. Toxicity assessment demonstrates that the SNAP-impregnated catheters are fully biocompatible, as extracts of the catheter tubings score 0 on a 3-point grading scale using an accepted mouse fibroblast cell-line toxicity model. Consequently, SNAP-impregnated silicone Foley catheters can likely provide an efficient strategy to greatly reduce the occurrence of nosocomial CAUTIs.

Spatio-Temporal Control of LbL Films for Biomedical Applications: From 2D to 3D

Introduced in the '90s by Prof. Moehwald, Lvov, and Decher, the layer-by-layer (LbL) assembly of polyelectrolytes has become a popular technique to engineer various types of objects such as films, capsules and free standing membranes, with an unprecedented control at the nanometer and micrometer scales. The LbL technique allows to engineer biofunctional surface coatings, which may be dedicated to biomedical applications in vivo but also to fundamental studies and diagnosis in vitro. Initially mostly developed as 2D coatings and hollow capsules, the range of complex objects created by the LbL technique has greatly expanded in the past 10 years. In this Review, the aim is to highlight the recent progress in the field of LbL films for biomedical applications and to discuss the various ways to spatially and temporally control the biochemical and mechanical properties of multilayers. In particular, three major developments of LbL films are discussed: 1) the new methods and templates to engineer LbL films and control cellular processes from adhesion to differentiation, 2) the major ways to achieve temporal control by chemical, biological and physical triggers and, 3) the combinations of LbL technique, cells and scaffolds for repairing 3D tissues, including cardio-vascular devices, bone implants and neuro-prosthetic devices.

Biomaterials for in situ tissue regeneration: development and perspectives

Biomaterials are of fundamental importance to in situ tissue regeneration, which has emerged as a powerful method to treat tissue defects. The development and perspectives of biomaterials for in situ tissue regeneration were summarized.

Layer-by-layer assemblies for antibacterial applications

This review describes the latest update on research in the area of layer-by-layer assemblies for antibacterial applications.

Brush-like polycarbonates containing dopamine, cations, and PEG providing a broad-spectrum, antibacterial, and antifouling surface via one-step coating

An antibacterial and antifouling surface is obtained by simple one-step immersion of a catheter surface with brush-like polycarbonates containing pendent adhesive dopamine, antifouling polyethylene glycol (PEG), and antibacterial cations. This coating demonstrates excellent antibacterial and antifouling activities against both Gram-positive (S. aureus) and Gram-negative (E. coli) bacteria, proteins, and platelets, good stability under simulated blood-flow conditions, and no toxicity.

Optimized polymeric film-based nitric oxide delivery inhibits bacterial growth in a mouse burn wound model

Nitric oxide (NO) has many biological roles (e.g. antimicrobial agent, promoter of angiogenesis, prevention of platelet activation) that make NO releasing materials desirable for a variety of biomedical applications. Localized NO release can be achieved from biomedical grade polymers doped with diazeniumdiolated dibutylhexanediamine (DBHD/N2O2) and poly(lactic-co-glycolic acid) (PLGA). In this study, the optimization of this chemistry to create film/patches that can be used to decrease microbial infection at wound sites is examined. Two polyurethanes with different water uptakes (Tecoflex SG-80A (6.2±0.7wt.%) and Tecophilic SP-60D-20 (22.5±1.1wt.%)) were doped with 25wt.% DBHD/N2O2 and 10wt.% of PLGA with various hydrolysis rates. Films prepared with the polymer that has the higher water uptake (SP-60D-20) were found to have higher NO release and for a longer duration than the polyurethane with the lower water uptake (SG-80A). The more hydrophilic polymer enhances the hydrolysis rate of the PLGA additive, thereby providing a more acidic environment that increases the rate of NO release from the NO donor. The optimal NO releasing and control SG-80A patches were then applied to scald burn wounds that were infected with Acinetobacter baumannii. The NO released from these patches applied to the wounds is shown to significantly reduce the A. baumannii infection after 24h (∼4 log reduction). The NO release patches are also able to reduce the level of transforming growth factor-β in comparison to controls, which can enhance re-epithelialization, decrease scarring and reduce migration of bacteria. The combined DBHD/N2O2 and PLGA-doped polymer patches, which could be replaced periodically throughout the wound healing process, demonstrate the potential to reduce risk of bacterial infection and promote the overall wound healing process.

Polymeric optical sensors for selective and sensitive nitrite detection using cobalt(III) corrole and rhodium(III) porphyrin as ionophores

Cobalt(III) 5,10,15-tris(4-tert-butylphenyl) corrole with a triphenylphosphine axial ligand and rhodium(III) 5,10,15,20-tetra(p-tert-butylphenyl) porphyrin are incorporated into plasticized poly(vinyl chloride) films to fabricate nitrite-selective bulk optodes via absorbance measurements. The resulting films yield sensitive, fast and fully reversible response toward nitrite with significantly enhanced nitrite selectivity over other anions including lipophilic anions such as thiocyanate and perchlorate. The selectivity patterns differ greatly from the Hofmeister series based on anion lipophilicity and are consistent with selectivity obtained with potentiometric sensors based on the same ionophores. The optical nitrite sensors are shown to be useful for detecting rates of emission of nitric oxide (NO) from NO releasing polymers containing S-nitroso-N-acetyl-DL-penicillamine.