Enhancing the biological performance of synthetic polymeric materials by decoration with engineered, decellularized extracellular matrix

GelMA-based bioactive hydrogel scaffolds with multiple bone defect repair functions: therapeutic strategies and recent advances

Currently, the clinical treatment of critical bone defects attributed to various causes remains a great challenge, and repairing these defects with synthetic bone substitutes is the most common strategy. In general, tissue engineering materials that mimic the structural, mechanical and biological properties of natural bone have been extensively applied to fill bone defects and promote in situ bone regeneration. Hydrogels with extracellular matrix (ECM)-like properties are common tissue engineering materials, among which methacrylate-based gelatin (GelMA) hydrogels are widely used because of their tunable mechanical properties, excellent photocrosslinking capability and good biocompatibility. Owing to their lack of osteogenic activity, however, GelMA hydrogels are combined with other types of materials with osteogenic activities to improve the osteogenic capability of the current composites. There are three main aspects to consider when enhancing the bone regenerative performance of composite materials: osteoconductivity, vascularization and osteoinduction. Bioceramics, bioglass, biomimetic scaffolds, inorganic ions, bionic periosteum, growth factors and two-dimensional (2D) nanomaterials have been applied in various combinations to achieve enhanced osteogenic and bone regeneration activities. Three-dimensional (3D)-bioprinted scaffolds are a popular research topic in bone tissue engineering (BTE), and printed and customized scaffolds are suitable for restoring large irregular bone defects due to their shape and structural tunability, enhanced mechanical properties, and good biocompatibility. Herein, the recent progress in research on GelMA-based composite hydrogel scaffolds as multifunctional platforms for restoring critical bone defects in plastic or orthopedic clinics is systematically reviewed and summarized. These strategies pave the way for the design of biomimetic bone substitutes for effective bone reconstruction with good biosafety. This review provides novel insights into the development and current trends of research on GelMA-based hydrogels as effective bone tissue engineering (BTE) scaffolds for correcting bone defects, and these contents are summarized and emphasized from various perspectives (osteoconductivity, vascularization, osteoinduction and 3D-bioprinting). In addition, advantages and deficiencies of GelMA-based bone substitutes used for bone regeneration are put forward, and corresponding improvement measures are presented prior to their clinical application in near future (created with BioRender.com).

Effect of In Vitro Culture Length on the Bone-Forming Capacity of Osteoblast-Derived Decellularized Extracellular Matrix Melt Electrowritten Scaffolds

Recent advancements in decellularization have seen the development of extracellular matrix (ECM)-decorated scaffolds for bone regeneration; however, little is understood of the impact of in vitro culture prior to decellularization on the performances of these constructs. Therefore, this study investigated the effect of in vitro culture on ECM-decorated melt electrowritten polycaprolactone scaffold bioactivity. The scaffolds were seeded with osteoblasts and cultured for 1, 2, or 4 weeks to facilitate bone-specific ECM deposition and subsequently decellularized to form an acellular ECM-decorated scaffold. The utilization of mild chemicals and DNase was highly efficient in removing DNA while preserving ECM structure and composition. ECM decoration of the melt electrowritten fibers was observed within the first week of culture, with increased ECM at 2 and 4 week culture periods. Infiltration of re-seeded cells as well as overall bone regeneration in a rodent calvarial model was impeded by a longer culture period. Thus, it was demonstrated that the length of culture has a key influence on the osteogenic properties of decellularized ECM-decorated scaffolds, with long-term culture (2+ weeks) causing pore obstruction and creating a physical barrier which interfered with bone formation. These findings have important implications for the development of effective ECM-decorated scaffolds for bone regeneration.

Engineering of extracellular matrix from human iPSC-mesenchymal progenitors to enhance osteogenic capacity of human bone marrow stromal cells independent of their age

Regeneration of bone defects is often limited due to compromised bone tissue physiology. Previous studies suggest that engineered extracellular matrices enhance the regenerative capacity of mesenchymal stromal cells. In this study, we used human-induced pluripotent stem cells, a scalable source of young mesenchymal progenitors (hiPSC-MPs), to generate extracellular matrix (iECM) and test its effects on the osteogenic capacity of human bone-marrow mesenchymal stromal cells (BMSCs). iECM was deposited as a layer on cell culture dishes and into three-dimensional (3D) silk-based spongy scaffolds. After decellularization, iECM maintained inherent structural proteins including collagens, fibronectin and laminin, and contained minimal residual DNA. Young adult and aged BMSCs cultured on the iECM layer in osteogenic medium exhibited a significant increase in proliferation, osteogenic marker expression, and mineralization as compared to tissue culture plastic. With BMSCs from aged donors, matrix mineralization was only detected when cultured on iECM, but not on tissue culture plastic. When cultured in 3D iECM/silk scaffolds, BMSCs exhibited significantly increased osteogenic gene expression levels and bone matrix deposition. iECM layer showed a similar enhancement of aged BMSC proliferation, osteogenic gene expression, and mineralization compared with extracellular matrix layers derived from young adult or aged BMSCs. However, iECM increased osteogenic differentiation and decreased adipocyte formation compared with single protein substrates including collagen and fibronectin. Together, our data suggest that the microenvironment comprised of iECM can enhance the osteogenic activity of BMSCs, providing a bioactive and scalable biomaterial strategy for enhancing bone regeneration in patients with delayed or failed bone healing.

Photothermal extracellular matrix based nanocomposite films and their effect on the osteogenic differentiation of BMSCs

Mild thermal stimulation in vivo could induce osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs). In this study, nano-functionalized photothermal extracellular matrix (ECM) nanocomposite films were obtained through adding graphene during cell culture, so that graphene could directly integrate with the ECM secreted by cells. Owing to the similarity of the ECM to the in vivo microenvironment and the apparent photothermal effect of graphene nanoflakes, heat could be generated and transferred at the material-cell interface in a biomimetic way. It was demonstrated that such nanocomposite films achieved an interface temperature rise with light illumination. This could be easily sensed by BMSCs through the ECM. According to alkaline phosphatase, osteogenic related gene expression, mineral deposition, and upregulated expression of heat shock protein (HSP70) and p-ERK, composite films with proper illumination significantly promoted the differentiation of BMSCs into osteoblasts. This work endeavors to study the thermal regulation of BMSC differentiation and provide a new perspective on biocompatible osteo-implant materials which can be remotely controlled.

Fabrication and Characterization of Decellularized Periodontal Ligament Cell Sheet Constructs

Decellularized tissue engineered constructs have the potential to promote regeneration by providing a biomimetic extracellular matrix that directs tissue specific regeneration when implanted in situ. Recently, the use of cell sheets has shown promising results in promoting periodontal regeneration. Here, we describe the fabrication of decellularized periodontal cell sheets with intact extracellular matrix structural and biological properties. Melt electro-spun polycaprolactone (PCL) scaffolds are used as a carrier for the inherently fragile cell sheets, in order to provide support during the processes of decellularization. An optimized decellularization method is outlined using perfusion with a combination of NH₄OH and Triton X-100 together with a DNase treatment step for DNA removal. The maintenance of extracellular matrix structural and biological integrity is important, and here, we describe the assessment of these properties using immunostaining for extracellular matrix proteins and ELISA for growth factor quantification.

Fabrication and Evaluation of Electrospun Silk Fibroin/Halloysite Nanotube Biomaterials for Soft Tissue Regeneration

The production of nanofibrous materials for soft tissue repair that resemble extracellular matrices (ECMs) is challenging. Electrospinning uniquely produces scaffolds resembling the ultrastructure of natural ECMs. Herein, electrospinning was used to fabricate Bombyx mori silk fibroin (SF) and SF/halloysite nanotube (HNT) composite scaffolds. Different HNT loadings were examined, but 1 wt% HNTs enhanced scaffold hydrophilicity and water uptake capacity without loss of mechanical strength. The inclusion of 1 wt% HNTs in SF scaffolds also increased the scaffold’s thermal stability without altering the molecular structure of the SF, as revealed by thermogravimetric analyses and Fourier transform infrared spectroscopy (FTIR), respectively. SF/HNT 1 wt% composite scaffolds better supported the viability and spreading of 3T3 fibroblasts and the differentiation of C2C12 myoblasts into aligned myotubes. These scaffolds coated with decellularised ECM from 3T3 cells or primary human dermal fibroblasts (HDFs) supported the growth of primary human keratinocytes. However, SF/HNT 1 wt% composite scaffolds with HDF-derived ECM provided the best microenvironment, as on these, keratinocytes formed intact monolayers with an undifferentiated, basal cell phenotype. Our data indicate the merits of SF/HNT 1 wt% composite scaffolds for applications in soft tissue repair and the expansion of primary human keratinocytes for skin regeneration.

A regulatory mechanism of a stepwise osteogenesis-mimicking decellularized extracellular matrix on the osteogenic differentiation of bone marrow-derived mesenchymal stem cells

A cell-derived decellularized extracellular matrix (dECM) plays a vital role in controlling cell functions because of its similarity to the in vivo microenvironment. In the process of stem cell differentiation, the composition of the dECM is not constant but is dynamically remolded. However, there is little information regarding the dynamic regulation by the dECM of the osteogenic differentiation of stem cells. Herein, four types of stepwise dECMs (0, 7, 14, and 21 d-ECM) were prepared from bone marrow-derived mesenchymal stem cells (BMSCs) undergoing osteogenic differentiation for 0, 7, 14, and 21 days after decellularization. In vitro experiments were designed to study the regulation of BMSC osteogenesis by dECMs. The results showed that all the dECMs could support the activity and proliferation of BMSCs but had different effects on their osteogenic differentiation. The 14d-ECM promoted the osteogenesis of BMSCs significantly compared with the other dECMs. Proteomic analysis demonstrated that the composition of dECMs changed over time. The 14d ECM had higher amounts of collagen type IV alpha 2 chain (COL4A2) than the other dECMs. Furthermore, COL4A2 was obviously enriched in the activated focal adhesion kinase (FAK)/phosphatidylinositol-4,5-bisphosphate 3-kinase (PI3K)/protein kinase B (AKT) signaling pathways. Thus, the 14d-ECM could promote the osteogenic differentiation of BMSCs, which might be related to the high content of COL4A2 in the 14d-ECM by activating the FAK/PI3K/AKT signaling pathways.

Advancements in Three Dimensional In-Vitro Cell Culture Models

The scientific field is observing a gradual shift from monolayer cultures to three-dimensional (3D) models, as they give a more relevant data in pre-clinical stages. This review summarizes the major techniques and materials used to develop 3D platforms, especially for cancer. It also discusses the challenges and some unresolved issues of the field and highlights some techniques that have made it to the market.

Modern Approaches to Acellular Therapy in Bone and Dental Regeneration

An approach called cell-free therapy has rapidly developed in regenerative medicine over the past decade. Understanding the molecular mechanisms and signaling pathways involved in the internal potential of tissue repair inspires the development of new strategies aimed at controlling and enhancing these processes during regeneration. The use of stem cell mobilization, or homing for regeneration based on endogenous healing mechanisms, prompted a new concept in regenerative medicine: endogenous regenerative medicine. The application of cell-free therapeutic agents leading to the recruitment/homing of endogenous stem cells has advantages in overcoming the limitations and risks associated with cell therapy. In this review, we discuss the potential of cell-free products such as the decellularized extracellular matrix, growth factors, extracellular vesicles and miRNAs in endogenous bone and dental regeneration.

Decellularised extracellular matrix decorated PCL PolyHIPE scaffolds for enhanced cellular activity, integration and angiogenesis

Wound healing involves a complex series of events where cell–cell and cell-extracellular matrix (ECM) interactions play a key role. Wounding can be simple, such as the loss of the epithelial integrity, or deeper and more complex, reaching to subcutaneous tissues, including blood vessels, muscles and nerves. Rapid neovascularisation of the wounded area is crucial for wound healing as it has a key role in supplying oxygen and nutrients during the highly demanding proliferative phase and transmigration of inflammatory cells to the wound area. One approach to circumvent delayed neovascularisation is the exogenous use of pro-angiogenic factors, which is expensive, highly dose-dependent, and the delivery of them requires a very well-controlled system to avoid leaky, highly permeable and haemorrhagic blood vessel formation. In this study, we decorated polycaprolactone (PCL)-based polymerised high internal phase emulsion (PolyHIPE) scaffolds with fibroblast-derived ECM to assess fibroblast, endothelial cell and keratinocyte activity in vitro and angiogenesis in ex ovo chick chorioallantoic membrane (CAM) assays. Our results showed that the inclusion of ECM in the scaffolds increased the metabolic activity of three types of cells that play a key role in wound healing and stimulated angiogenesis in ex ovo CAM assays over 7 days. Herein, we demonstrated that fibroblast-ECM functionalised PCL PolyHIPE scaffolds appear to have great potential to be used as an active wound dressing to promote angiogenesis and wound healing.

Decellularisation of in vitro generated extracellular matrix (ECM) provides an effective way to stimulate angiogenesis and wound healing.

Cell-derived extracellular matrix materials for tissue engineering

The involvement of cell-derived extracellular matrix (CDM) in assembling tissue engineering scaffolds has yielded significant results. CDM possesses excellent characteristics, such as ideal cellular microenvironment mimicry and good biocompatibility, which make it a popular research direction in the field of bionanomaterials. CDM has significant advantages as an expansion culture substrate for stem cells, including stabilization of phenotype, reversal of senescence, and guidance of specific differentiation. In addition, the applications of CDM-assembled tissue engineering scaffolds for disease simulation and tissue organ repair are comprehensively summarized; the focus is mainly on bone and cartilage repair, skin defect or wound healing, engineered blood vessels, peripheral nerves, and periodontal tissue repair. We consider CDM a highly promising bionic biomaterial for tissue engineering applications and propose a vision for its comprehensive development.

Decellularized matrix could affect the proliferation and differentiation of periodontal ligament stem cells in vitro

OBJECTIVE AND BACKGROUND

Recently, decellularized matrix (DCM) is considered as a new biomaterial for tissue regeneration. To explore the possible application of DCM in periodontal regeneration, the effect of DCM from three different cells on the proliferation and differentiation of human periodontal ligament stem cells (PDLSCs) was investigated.

METHODS

DCM derived from human periodontal ligament cells (PDLCs), dental pulp cells (DPCs), and gingival fibroblasts (GFs) were fabricated using Triton X-100/NH₄ OH combined with DNase I. Allogeneic PDLSCs were cultured on PDLC-DCM, DPC-DCM, and GF-DCM, respectively. The proliferative capacity of PDLSCs was evaluated by PicoGreen assay kit. The expression of alkaline phosphatase (ALP), runt-related transcription factor-2 (RUNX2), osteocalcin (OCN), collagen I (COL1), periostin (POSTN), and cementum protein 1 (CEMP1) were detected by qRT-PCR and western blotting.

RESULTS

PDLC-DCM, DPC-DCM, and GF-DCM had similar and integrated networks of extracellular matrix, as well as significantly decreased DNA content. Compared with control group in which PDLSCs were directly seeded in culture plates, PDLC-DCM, DPC-DCM, and GF-DCM promoted the proliferation of re-seeded PDLSCs. Additionally, PDLSCs on DCM exhibited higher mRNA and protein expression levels of ALP, RUNX2, OCN, and COL1. The expression of POSTN in PDLC-DCM group was significantly higher than control group at both mRNA and protein levels.

CONCLUSIONS

PDLC-DCM, DPC-DCM, and GF-DCM could enhance the proliferation of PDLSCs. PDLC-DCM facilitated osteogenic differentiation and periodontal ligament differentiation of PDLSCs, while DPC-DCM and GF-DCM promoted osteogenic differentiation.

Regeneration potential of decellularized periodontal ligament cell sheets combined with 15-deoxy-Δ12,14-prostaglandin J2 nanoparticles in a rat periodontal defect

Periodontitis is a chronic inflammatory disease characterized by loss of attachment and destruction of the periodontium. Decellularized sheet, as an advanced tissue regeneration engineering biomaterial, has been researched and applied in many fields, but its effects on periodontal regeneration remain unclear. In this study, the biological properties of decellularized human periodontal ligament cell (dHPDLC) sheets were evaluated in vitro. Polycaprolactone/gelatin (PCL/GE) nanofibers were fabricated as a carrier to enhance the mechanical strength of the dHPDLC sheet. 15-deoxy-[Formula: see text]-prostaglandin J₂ (15d-PGJ₂) nanoparticles were added for anti-inflammation and regeneration improvement. For in vivo analysis, dHPDLC sheets combined with 15d-PGJ₂ nanoparticles, with or without PCL/GE, were implanted into rat periodontal defects. The periodontal regeneration effects were identified by microcomputed tomography (micro-CT) and histological staining, and immunohistochemistry. The results revealed that DNA content was reduced by 96.6%. The hepatocyte growth factor, vascular endothelial growth factor, and basic fibroblast growth factor were preserved but reduced. The expressions or distribution of collagen I and fibronectin were similar in dHPDLC and nondecellularized cell sheets. The dHPDLC sheets maintained the intact structure of the extracellular matrix. It could be recellularized by allogeneic human periodontal stem ligament cells and retain osteoinductive potential. Newly formed bone, cementum, and PDL were observed in dHPDLC sheets combined with 15d-PGJ₂ groups, with or without PCL/GE nanofibers, for four weeks post-operation in vivo. Bringing together all these points, this new construct of dHPDLC sheets can be a potential candidate for periodontal regeneration in an inflammatory environment of the oral cavity.

Bone Matrix Non-Collagenous Proteins in Tissue Engineering: Creating New Bone by Mimicking the Extracellular Matrix

Engineering biomaterials that mimic the extracellular matrix (ECM) of bone is of significant importance since most of the outstanding properties of the bone are due to matrix constitution. Bone ECM is composed of a mineral part comprising hydroxyapatite and of an organic part of primarily collagen with the rest consisting on non-collagenous proteins. Collagen has already been described as critical for bone tissue regeneration; however, little is known about the potential effect of non-collagenous proteins on osteogenic differentiation, even though these proteins were identified some decades ago. Aiming to engineer new bone tissue, peptide-incorporated biomimetic materials have been developed, presenting improved biomaterial performance. These promising results led to ongoing research focused on incorporating non-collagenous proteins from bone matrix to enhance the properties of the scaffolds namely in what concerns cell migration, proliferation, and differentiation, with the ultimate goal of designing novel strategies that mimic the native bone ECM for bone tissue engineering applications. Overall, this review will provide an overview of the several non-collagenous proteins present in bone ECM, their functionality and their recent applications in the bone tissue (including dental) engineering field.

Platelet-rich plasma and stromal vascular fraction cells for the engineering of axially vascularized osteogenic grafts

Avascular necrosis of bone (AVN) leads to sclerosis and collapse of bone and joints. We have previously shown that axially vascularized osteogenic constructs, engineered by combining human stromal vascular fraction (SVF) cells and a ceramic scaffold, can revitalize necrotic bone of clinically relevant size in a rat model of AVN. For a clinical translation, the fetal bovine serum (FBS) used to generate such grafts should be substituted by a nonxenogeneic culture supplement. Human thrombin-activated platelet-rich plasma (tPRP) was evaluated in this context. SVF cells were cultured inside porous hydroxyapatite scaffolds with a perfusion-based bioreactor system for 5 days. The culture medium was supplemented with either 10% FBS or 10% tPRP. The resulting constructs were inserted into devitalized bovine bone cylinders to mimic the treatment of a necrotic bone. A ligated vascular bundle was inserted into the constructs upon subcutaneous implantation in the groin of nude rats. After 1 and 8 weeks, constructs were harvested, and vascularization, host cell recruitment, and bone formation were analyzed. After 1 week in vivo, constructs were densely vascularized, with no difference between tPRP- and FBS-based ones. After 8 weeks, bone formation and vascularization was found in both tPRP- and FBS-precultured constructs. However, the amount of bone and the vessel density were respectively 2.2- and 1.8-fold higher in the tPRP group. Interestingly, the density of M2, proregenerative macrophages was also significantly higher (6.9-fold) following graft preparation with tPRP than with FBS. Our findings indicate that tPRP is a suitable substitute for FBS to generate vascularized, osteogenic grafts from SVF cells and could thus be implemented in protocols for clinical translation of this strategy towards the treatment of bone loss and AVN.

Osteogenic-differentiated mesenchymal stem cell-secreted extracellular matrix as a bone morphogenetic protein-2 delivery system for ectopic bone formation

While human bone morphogenetic protein-2 (BMP-2) is a promising growth factor for bone regeneration, a major challenge in biomedical applications is finding an optimal carrier for its delivery at the site of injury. Because of their natural affinities for growth factors (including BMP-2) as well as their role in instructing cell function, cultured cell-derived extracellular matrices (ECM) are of special interest. We hereby hypothesized that a "bony matrix" containing mineralized, osteogenic ECM is a potential efficacious carrier of BMP-2 for promoting bone formation and, therefore, compared the efficacy of the decellularized ECM derived from osteogenic-differentiated human mesenchymal stem cells (hMSCs) to the one obtained from ECM from undifferentiated hMSCs. Our results provided evidence that both ECMs can bind BMP-2 and promote bone formation when implanted ectopically in mice. The osteoinductive potential of BMP-2, however, was greater when loaded within an osteogenic MSC-derived ECM; this outcome was correlated with higher sequestration capacity of BMP-2 over time in vivo. Interestingly, although the BMP-2 mainly bound onto the mineral crystals contained within the osteogenic MSC derived-ECM, these mineral components were not involved in the observed higher osteoinductivity, suggesting that the organic components were the critical components for the matrix efficacy as BMP-2 carrier.

Biomimetic periosteum-bone substitute composed of preosteoblast-derived matrix and hydrogel for large segmental bone defect repair

Repairing large segmental bone defects above a critical size remains challenging with high risk of delayed union or even non-union. From the perspective of bone development and clinical experience, periosteum plays an indispensable role in bone repair and reconstruction. In this study, we explored the feasibility of using preosteoblast-derived matrix (pODM) as a biomimetic periosteum. By culturing MC3T3-E1 cell sheet on poly(dimethylsiloxane) and performing decellularization, an integral cell-free sheet of pODM could be readily harvested. Bone marrow mesenchymal stem cells (BMSCs) adhered and proliferated well on pODM. In addition, pODM exhibited a chemotactic effect on BMSCs in a concentration-dependent manner and also promoted osteogenic differentiation of BMSCs. Following that, pODM was wrapped around a gelatin methacryloyl (GelMA) hydrogel to construct an engineered periosteum-bone substitute. A rabbit radius segmental bone defect model was used to examine the bone repair efficacy of pODM/GelMA. Upon implantation of pODM/GelMA construct for 12 weeks, the critical-sized bone defects completely healed with remarkable full reconstruction of medullary cavity at the radial diaphysis. Together, this work proposes a high potency of using precursor cell-derived matrix as a biomimetic periosteum, which preserves the beneficial biological factors while avoids the limitations of using exogenous cells for bone regeneration. Combining precursor cell-derived matrix with hydrogel may provide a promising periosteum-bone biomimetic substitute for bone repair. STATEMENT OF SIGNIFICANCE: Repairing large segmental bone defects above a critical size remains challenging. As the periosteum plays an essential role in bone repair, this study aimed to explore the use of preosteoblast-derived matrix (pODM), harvested from decellularized MC3T3-E1 cell sheet, as a biomimetic periosteum to facilitate bone repair. We found that in vitro, pODM exhibited considerable chemotactic effect and osteogenic induction capability to bone marrow mesenchymal stem cells (BMSCs). In vivo, implantation of pODM/gelatin methacryloyl (GelMA) constructs as engineered periosteum-bone substitutes effectively repaired the critical-sized segmental bone defects at rabbit radius. Surprisingly, remarkable full reconstruction of medullary cavity at the diaphysis was achieved. Therefore, combining pODM with hydrogel may provide a promising biomimetic substitute for bone repair.

Bioreactor Platform for Biomimetic Culture and in situ Monitoring of the Mechanical Response of in vitro Engineered Models of Cardiac Tissue

In the past two decades, relevant advances have been made in the generation of engineered cardiac constructs to be used as functional in vitro models for cardiac research or drug testing, and with the ultimate but still challenging goal of repairing the damaged myocardium. To support cardiac tissue generation and maturation in vitro, the application of biomimetic physical stimuli within dedicated bioreactors is crucial. In particular, cardiac-like mechanical stimulation has been demonstrated to promote development and maturation of cardiac tissue models. Here, we developed an automated bioreactor platform for tunable cyclic stretch and in situ monitoring of the mechanical response of in vitro engineered cardiac tissues. To demonstrate the bioreactor platform performance and to investigate the effects of cyclic stretch on construct maturation and contractility, we developed 3D annular cardiac tissue models based on neonatal rat cardiac cells embedded in fibrin hydrogel. The constructs were statically pre-cultured for 5 days and then exposed to 4 days of uniaxial cyclic stretch (sinusoidal waveform, 10% strain, 1 Hz) within the bioreactor. Explanatory biological tests showed that cyclic stretch promoted cardiomyocyte alignment, maintenance, and maturation, with enhanced expression of typical mature cardiac markers compared to static controls. Moreover, in situ monitoring showed increasing passive force of the constructs along the dynamic culture. Finally, only the stretched constructs were responsive to external electrical pacing with synchronous and regular contractile activity, further confirming that cyclic stretching was instrumental for their functional maturation. This study shows that the proposed bioreactor platform is a reliable device for cyclic stretch culture and in situ monitoring of the passive mechanical response of the cultured constructs. The innovative feature of acquiring passive force measurements in situ and along the culture allows monitoring the construct maturation trend without interrupting the culture, making the proposed device a powerful tool for in vitro investigation and ultimately production of functional engineered cardiac constructs.

Role of Region-Specific Brain Decellularized Extracellular Matrix on In Vitro Neuronal Maturation

Recent advancements in tissue engineering suggest that biomaterials, such as decellularized extracellular matrix (ECM), could serve to potentiate the localization and efficacy of regenerative therapies in the central nervous system. Still, what factors and which mechanisms are required from these ECM-based biomaterials to exert their effect are not entirely understood. In this study, we use the brain as a novel model to test the effects of particular biochemical and structural properties by evaluating, for the first time, three different sections of the brain (i.e., cortex, cerebellum, and remaining areas) side-by-side and their corresponding decellularized counterparts using mechanical (4-day) and chemical (1-day) decellularization protocols. The three different brain subregions had considerably different initial conditions in terms of cell number and growth factor content, and some of these differences were maintained after decellularization. Decellularized ECM from both protocols was used as a substrate or as soluble factor, in both cases showing good cell attachment and growth capabilities. Interestingly, the 1-day protocol was capable of promoting greater differentiation than the 4-day protocol, probably due to its capacity to remove a similar amount of cell nuclei, while better conserving the biochemical and structural components of the cerebral ECM. Still, some limitations of this study include the need to evaluate the response in other biologically relevant cell types, as well as a more detailed characterization of the components in the decellularized ECM of the different brain subregions. In conclusion, our results show differences in neuronal maturation depending on the region of the brain used to produce the scaffolds. Complex organs such as the brain have subregions with very different initial cellular and biochemical conditions that should be considered for decellularization to minimize exposure to immunogenic components, while retaining bioactive factors conducive to regeneration. [Figure: see text] Impact statement The present study offers new knowledge about the production of decellularized extracellular matrix scaffolds from specific regions of the porcine brain, with a direct comparison of their effect on in vitro neuronal maturation. Our results show differences in neuronal maturation depending on the region of the brain used to produce the scaffolds, suggesting that it is necessary to consider the initial cellular content of the source tissue and its bioactive capacity for the production of an effective regenerative therapy for stroke.

Boosting the Osteogenic and Angiogenic Performance of Multiscale Porous Polycaprolactone Scaffolds by In Vitro Generated Extracellular Matrix Decoration

Tissue engineering (TE)-based bone grafts are favorable alternatives to autografts and allografts. Both biochemical properties and the architectural features of TE scaffolds are crucial in their design process. Synthetic polymers are attractive biomaterials to be used in the manufacturing of TE scaffolds, due to various advantages, such as being relatively inexpensive, enabling precise reproducibility, possessing tunable mechanical/chemical properties, and ease of processing. However, such scaffolds need modifications to improve their limited interaction with biological tissues. Structurally, multiscale porosity is advantageous over single-scale porosity; therefore, in this study, we have considered two key points in the design of a bone repair material; (i) manufacture of multiscale porous scaffolds made of photocurable polycaprolactone (PCL) by a combination of emulsion templating and three-dimensional (3D) printing and (ii) decoration of these scaffolds with the in vitro generated bone-like extracellular matrix (ECM) to create biohybrid scaffolds that have improved biological performance compared to PCL-only scaffolds. Multiscale porous scaffolds were fabricated, bone cells were cultured on them, and then they were decellularized. The biological performance of these constructs was tested in vitro and in vivo. Mesenchymal progenitors were seeded on PCL-only and biohybrid scaffolds. Cells not only showed improved attachment on biohybrid scaffolds but also exhibited a significantly higher rate of cell growth and osteogenic activity. The chick chorioallantoic membrane (CAM) assay was used to explore the angiogenic potential of the biohybrid scaffolds. The CAM assay indicated that the presence of the in vitro generated ECM on polymeric scaffolds resulted in higher angiogenic potential and a high degree of tissue infiltration. This study demonstrated that multiscale porous biohybrid scaffolds present a promising approach to improve bioactivity, encourage precursors to differentiate into mature bones, and to induce angiogenesis.

Osteogenic preconditioning in perfusion bioreactors improves vascularization and bone formation by human bone marrow aspirates

Cell-derived extracellular matrix (ECM) provides a niche to promote osteogenic differentiation, cell adhesion, survival, and trophic factor secretion. To determine whether osteogenic preconditioning would improve the bone-forming potential of unfractionated bone marrow aspirate (BMA), we perfused cells on ECM-coated scaffolds to generate naïve and preconditioned constructs, respectively. The composition of cells selected from BMA was distinct on each scaffold. Naïve constructs exhibited robust proangiogenic potential in vitro, while preconditioned scaffolds contained more mesenchymal stem/stromal cells (MSCs) and endothelial cells (ECs) and exhibited an osteogenic phenotype. Upon implantation into an orthotopic calvarial defect, BMA-derived ECs were present in vessels in preconditioned implants, resulting in robust perfusion and greater vessel density over the first 14 days compared to naïve implants. After 10 weeks, human ECs and differentiated MSCs were detected in de novo tissues derived from naïve and preconditioned scaffolds. These results demonstrate that bioreactor-based preconditioning augments the bone-forming potential of BMA.

Synovium stem cell-derived matrix enhances anti-inflammatory properties of rabbit articular chondrocytes via the SIRT1 pathway

Autologous chondrocyte implantation (ACI) is a promising approach to repair cartilage defects; however, the cartilage trauma-induced inflammatory environment compromises its clinical outcomes. Cell-derived decellularized extracellular matrix (DECM) has been used as a culture substrate for mesenchymal stem cells (MSCs) to improve the cell proliferation and lineage-specific differentiation. In this study, DECM deposited by synovium-derived MSCs was used as an in vitro expansion system for rabbit articular chondrocytes and the response of DECM-expanded chondrocytes to pro-inflammatory cytokines such as interleukin-1β (IL-1β) and tumor necrosis factor-α (TNF-α) was evaluated. Compared with those grown on tissue culture polystyrene (TCPS), the proliferation rate was significantly improved in DECM-expanded chondrocytes. TCPS- and DECM-expanded chondrocytes were isolated and induced to redifferentiation in a high-density pellet culture. DECM-expanded chondrocytes exerted a stronger resistance to 1 ng/mL of IL-1β than TCPS-expanded cells, but the production of cartilage matrix in both groups was inhibited by 5 ng/mL of IL-1β. When exposed to 1 or 5 ng/mL of TNF-α, DECM-expanded chondrocytes showed higher levels of cartilage matrix synthesis than TCPS-expanded cells. In addition, the gene expression of IL-1β- or TNF-α-induced matrix degrading enzymes (MMP3, MMP9, MMP13, and ADAMTS5) was significantly lower in DECM-expanded chondrocytes than TCPS-expanded cells. Furthermore, we found that SIRT1 inhibition by nicotinamide completely counteracted the protective effect of DECM on chondrocytes in the presence of IL-1β or TNF-α, indicating that the SIRT1 signaling pathway was involved in the DECM-mediated enhancement of anti-inflammatory properties of chondrocytes. Taken together, this work suggests that stem cell-derived DECM is a superior culture substrate for in vitro chondrocyte expansion by improving proliferation and enhancing the anti-inflammatory properties of chondrocytes. DECM-expanded chondrocytes with enhanced anti-inflammatory properties hold great potential in clinically ACI-based cartilage repair.

Biomimetic polyetheretherketone microcarriers with specific surface topography and self-secreted extracellular matrix for large-scale cell expansion

Reusable microcarriers with appropriate surface topography, mechanical properties, as well as biological modification through decellularization facilitating repeated cell culture are crucial for tissue engineering applications. Herein, we report the preparation of topological polyetheretherketone (PEEK) microcarriers via gas-driven and solvent exchange method followed by hydrothermal treatment at high temperature and pressure. After hydrothermal treated for 8 h, the resulting topological PEEK microcarriers exhibit walnut-like surface topography and good sphericity as well as uniform size distribution of 350.24 ± 19.44 µm. And the average width between ravine-patterned surface of PEEK microcarriers is 780 ± 290 nm. After repeated steam sterilization by autoclaving for three times, topological PEEK microcarriers show nearly identical results compared with previous ones indicating strong tolerance to high temperature and pressure. This is a unique advantage for large-scale cell expansion and clinical applications. Moreover, PEEK microcarriers with special topography possess higher protein adsorption efficiency. In addition, the reutilization and biofunctionalization with repeated decellularization of topological PEEK microcarriers show highly beneficial for cell adhesion and proliferation. Therefore, our study is of great importance for new generation microcarriers with micro-and nano-scale surface feature for a broad application prospect in tissue engineering.

Extracellular Matrices to Modulate the Innate Immune Response and Enhance Bone Healing

Extracellular matrices (ECMs) have emerged as promising off-the-shelf products to induce bone regeneration, with the capacity not only to activate osteoprogenitors, but also to influence the immune response. ECMs generated starting from living cells such as mesenchymal stromal cells (MSCs) have the potential to combine advantages of native tissue-derived ECMs (e.g., physiological presentation of multiple regulatory factors) with those of synthetic ECMs (e.g., customization and reproducibility of composition). MSC-derived ECMs could be tailored by enrichment not only in osteogenic cytokines, but also in immunomodulatory factors, to skew the innate immune response toward regenerative processes. After reviewing the different immunoregulatory properties of ECM components, here we propose different approaches to engineer ECMs enriched in factors capable to regulate macrophage polarization, recruit host immune and mesenchymal cells, and stimulate the synthesis of other immunoinstructive cytokines. Finally, we offer a perspective on the possible evolution of the paradigm based on biological and chemico-physical design considerations, and the use of gene editing approaches.

Bone marrow mesenchymal stem cells: Aging and tissue engineering applications to enhance bone healing

Bone has well documented natural healing capacity that normally is sufficient to repair fractures and other common injuries. However, the properties of bone change throughout life, and aging is accompanied by increased incidence of bone diseases and compromised fracture healing capacity, which necessitate effective therapies capable of enhancing bone regeneration. The therapeutic potential of adult mesenchymal stem cells (MSCs) for bone repair has been long proposed and examined. Actions of MSCs may include direct differentiation to become bone cells, attraction and recruitment of other cells, or creation of a regenerative environment via production of trophic growth factors. With systemic aging, MSCs also undergo functional decline, which has been well investigated in a number of recent studies. In this review, we first describe the changes in MSCs during aging and discuss how these alterations can affect bone regeneration. We next review current research findings on bone tissue engineering, which is considered a promising and viable therapeutic solution for structural and functional restoration of bone. In particular, the importance of MSCs and bioscaffolds is highlighted. Finally, potential approaches for the prevention of MSC aging and the rejuvenation of aged MSC are discussed.

Characterization and in ovo vascularization of a 3D-printed hydroxyapatite scaffold with different extracellular matrix coatings under perfusion culture

For the fabrication of appropriate bone tissue-engineered constructs several prerequisites should be fulfilled. They should offer long-term stability, allow proper cell attachment and proliferation and furthermore be osteoinductive and easy to be vascularized. Having these requirements as background, we fabricated a novel porous 3D-printed hydroxyapatite (HA) scaffold and treated it with oxygen plasma (OPT). MG-63 pre-osteoblast-seeded bone constructs allowed good cell attachment and proliferation, which was even better when cultivated in a perfusion flow bioreactor. Moreover, the deposition of extracellular matrix (ECM) on the otherwise inorganic surface changed the mechanical properties in a favourable manner: elasticity increased from 42.95±1.09 to 91.9±5.1 MPa (assessed by nanoindentation). Compared to static conditions, osteogenic differentiation was enhanced in the bioreactor, with upregulation of ALP, collagen I and osteocalcin gene expression. In parallel experiments, primary human bone marrow mesenchymal stromal cells (hBMSCs) were used and findings under dynamic conditions were similar; with a higher commitment towards osteoblasts compared to static conditions. In addition, angiogenic markers CD31, eNOS and VEGF were upregulated, especially when osteogenic medium was used rather than proliferative medium. To compare differently fabricated ECMs in terms of vascularization, decellularized constructs were tested in the chorioallantoic membrane (CAM) assay with subsequent assessment of the functional perfusion capacity by MRI in the living chick embryo. Here, vascularization induced by ECM from osteogenic medium led to a vessel distribution more homogenous throughout the construct, while ECM from proliferative medium enhanced vessel density at the interface and, to a lower extent, at the middle and top. We conclude that dynamic cultivation of a novel porous OPT HA scaffold with hBMSCs in osteogenic medium and subsequent decellularization provides a promising off-the-shelf bone tissue-engineered construct.

Tissue Engineered Constructs for Periodontal Regeneration: Current Status and Future Perspectives

The periodontium, consisting of gingiva, periodontal ligament, cementum, and alveolar bone, is a hierarchically organized tissue whose primary role is to provide physical and mechanical support to the teeth. Severe cases of periodontitis, an inflammatory condition initiated by an oral bacterial biofilm, can lead to significant destruction of soft and hard tissues of the periodontium and result in compromised dental function and aesthetics. Although current treatment approaches can limit the progression of the disease by controlling the inflammatory aspect, complete periodontal regeneration cannot be predictably achieved. Various tissue engineering approaches are investigated for their ability to control the critical temporo-spatial wound healing events that are essential for achieving periodontal regeneration. This paper reviews recent progress in the field of periodontal tissue engineering with an emphasis on advanced 3D multiphasic tissue engineering constructs (TECs) and provides a critical analysis of their regenerative potential and limitations. The review also elaborates on the future of periodontal tissue engineering, including scaffold customization for individual periodontal defects, TEC's functionalization strategies for imparting enhanced bioactivity, periodontal ligament fiber guidance, and the utilization of chair-side regenerative solutions that can facilitate clinical translation.

In vitro biomimetic engineering of a human hematopoietic niche with functional properties

In adults, human hematopoietic stem and progenitor cells (HSPCs) reside in the bone marrow (BM) microenvironment. Our understanding of human hematopoiesis and the associated niche biology remains limited, due to human material accessibility and limits of existing in vitro culture models. The establishment of an in vitro BM system would offer an experimentally accessible and tunable platform to study human hematopoiesis. Here, we develop a 3D engineered human BM analog by recapitulating some of the hematopoietic niche elements. This includes a bone-like scaffold, functionalized by human stromal and osteoblastic cells and by the extracellular matrix they deposited during perfusion culture in bioreactors. The resulting tissue exhibited compositional and structural features of human BM while supporting the maintenance of HSPCs. This was associated with a compartmentalization of phenotypes in the bioreactor system, where committed blood cells are released into the liquid phase and HSPCs preferentially reside within the engineered BM tissue, establishing physical interactions with the stromal compartment. Finally, we demonstrate the possibility to perturb HSPCs' behavior within our 3D niches by molecular customization or injury simulation. The developed system enables the design of advanced, tunable in vitro BM proxies for the study of human hematopoiesis.

Decoration of RGD-mimetic porous scaffolds with engineered and devitalized extracellular matrix for adipose tissue regeneration

Fat grafting is emerging as a promising alternative to silicon implants in breast reconstruction surgery. Unfortunately, this approach does not provide a proper mechanical support and is affected by drawbacks such as tissue resorption and donor site morbidity. Synthetic scaffolds can offer a valuable alternative to address these challenges, but poorly recapitulate the biochemical stimuli needed for tissue regeneration. Here, we aim at combining the positive features of a structural, synthetic polymer to an engineered, devitalized extracellular matrix (ECM) to generate a hybrid construct that can provide a mix of structural and biological stimuli needed for adipose tissue regeneration. A RGD-mimetic synthetic scaffold OPAAF, designed for soft tissue engineering, was decorated with ECM deposited by human adipose stromal cells (hASCs). The adipoinductive potential of the hybrid ECM-OPAAF construct was validated in vitro, by culture with hASC in a perfusion bioreactor system, and in vivo, by subcutaneous implantation in nude mouse. Our findings demonstrate that the hybrid ECM-OPAAF provides proper mechanical support and adipoinductive stimuli, with potential applicability as off-the-shelf material for adipose tissue reconstruction.

STATEMENT OF SIGNIFICANCE

In this study we combined the functionalities of a synthetic polymer with those of an engineered and subsequently devitalized extracellular matrix (ECM) to generate a hybrid material for adipose tissue regeneration. The developed hybrid ECM-OPAAF was demonstrated to regulate human adipose stromal cells adipogenic commitment in vitro and adipose tissue infiltration in vivo. Our findings demonstrate that the hybrid ECM-OPAAF provide proper mechanical support and adipoinductive stimuli and represents a promising off-the-shelf material for adipose tissue reconstruction. We believe that our approach could offer an alternative strategy for adipose tissue reconstruction in case of mastectomy or congenital abnormalities, overcoming the current limitations of autologous fat based strategies such as volume resorption and donor site morbidity.

Subpopulations of dermal skin fibroblasts secrete distinct extracellular matrix: implications for using skin substitutes in the clinic

Background

While several commercial dermoepidermal scaffolds can promote wound healing of the skin, the achievement of complete skin regeneration still represents a major challenge.

Objectives

To perform biological characterization of self‐assembled extracellular matrices (ECMs) from three different subpopulations of fibroblasts found in human skin: papillary fibroblasts (Pfi), reticular fibroblasts (Rfi) and dermal papilla fibroblasts (DPfi).

Methods

Fibroblast subpopulations were cultured with ascorbic acid to promote cell‐assembled matrix production for 10 days. Subsequently, cells were removed and the remaining matrices characterized. Additionally, in another experiment, keratinocytes were seeded on the top of cell‐depleted ECMs to generate epidermal‐only skin constructs.

Results

We found that the ECM self‐assembled by Pfi exhibited randomly oriented fibres associated with the highest interfibrillar space, reflecting ECM characteristics that are physiologically present within the papillary dermis. Mass spectrometry followed by validation with immunofluorescence analysis showed that thrombospondin 1 is preferentially expressed within the DPfi‐derived matrix. Moreover, we observed that epidermal constructs grown on DPfi or Pfi matrices exhibited normal basement membrane formation, whereas Rfi matrices were unable to support membrane formation.

Conclusions

We argue that inspiration can be taken from these different ECMs, to improve the design of therapeutic biomaterials in skin engineering applications.

What's already known about this topic?

There are several types of skin fibroblasts within the dermis that can be defined by their spatial location: papillary fibroblasts (Pfi), reticular fibroblasts (Rfi) and dermal papilla fibroblasts (DPfi).

Extracellular matrix (ECM) composition is distinct with regard to composition and architecture within the papillary, reticular and hair follicle dermis in vivo.

When skin is injured, dermal replacement substitutes used for tissue repair do not reflect the heterogeneity observed within the skin dermis.

What does this study add?

Self‐assembled ECMs from different subpopulations of skin fibroblasts can be generated in vitro.

Cell‐assembled ECMs made in vitro from Pfi, Rfi and DPfi reflect dermal heterogeneity seen in vivo and are morphologically, functionally and compositionally distinct from one another.

Inspiration should be taken from cell‐assembled ECMs from distinct fibroblast subpopulations, to improve the design of therapeutic biomaterials in skin engineering applications.

What is the translational message?

Cell‐assembled ECMs from DPfi and Pfi, but not Rfi, can support formation of a basement membrane in adjacent keratinocytes in vitro.

Inspiration should be taken from cell‐assembled ECMs from distinct fibroblast subpopulations, to improve the design of therapeutic biomaterials in skin engineering applications.

Linked Comment: https://doi.org/10.1111/bjd.16773.

https://doi.org/10.1111/bjd.16946 available online

https://goo.gl/Uqv3dl

The effect of decellularized tissue engineered constructs on periodontal regeneration

AIM

To evaluate the effect of decellularized tissue engineered constructs on cell differentiation in vitro and periodontal regeneration in vivo.

MATERIALS AND METHODS

Periodontal ligament cell (PDLC) sheets were loaded on polycaprolactone (PCL) scaffolds and then decellularized. Constructs were assessed for their effect on allogenic PDLC and mesenchymal stem cell (MSC) differentiation in vitro, as evaluated by gene expression of bone and periodontal ligament tissue markers post-seeding. Expression of MSC marker STRO-1 was assessed by immunostaining. Decellularized constructs were evaluated in a rat periodontal defect model to assess their biocompatibility and tissue integration. Microcomputed topography (μCT) and histological assessment were performed to assess the regenerative potential of the constructs at 2 and 4 weeks postoperatively.

RESULTS

There was upregulation of bone marker gene expression by PDLCs especially on the 14th day. MSCs lacked bone markers expression, but showed increased collagen I marker expression on day 14. STRO-1 expression by the MSCs decreased over the three timepoints when seeded on decellularized sheets. Histological assessment demonstrated the biocompatibility of the decellularized constructs in vivo. More new attachment formation was observed on the decellularized constructs compared to scaffold only controls.

CONCLUSION

Decellularized tissue engineered constructs are capable of inducing cell differentiation in vitro and have the potential to facilitate periodontal regeneration in vivo.

Inhibition of osteoclastogenesis by stem cell-derived extracellular matrix through modulation of intracellular reactive oxygen species

Decellularized extracellular matrix (ECM) derived from stem cells has been shown as a promising biomaterial for bone regeneration because of the promotion effect on osteogenesis in mesenchymal stem cells (MSCs). However, bone regeneration is also influenced by bone resorption and little is known about the effect of cell-derived ECM on osteoclast differentiation. In this study, ECM was deposited by MSCs and, after decellularization, the effect of ECM on osteoclastogenesis of bone marrow monocytes (BMMs) was investigated in comparison to standard tissue culture polystyrene. Our results showed that cell-derived ECM improved BMM proliferation but potently inhibited osteoclast differentiation, evidenced by down-regulation of multinucleated tartrate-resistant acid phosphatase (TRAP)-positive cells, areas of actin rings, and osteoclast-specific gene expression. ECM-mediated attenuation of intracellular reactive oxygen species (ROS) was suggested to play a rival role in the inhibition of osteoclastogenesis, because exogenous hydrogen peroxide supplementation partially rescued the ECM-inhibited osteoclastogenesis. Furthermore, rather than collagen type I, fibronectin in the ECM contributed to ECM-mediated anti-osteoclastogenesis. In conclusion, stem cell-derived decellularized ECM significantly suppressed osteoclastogenesis via the attenuation of intracellular ROS. The anti-osteoclastogenic property of cell-derived ECM may benefit its clinical use for modulating bone remodeling and promoting bone tissue engineering.

STATEMENT OF SIGNIFICANCE

Decellularized extracellular matrix (ECM) derived from stem cells has been shown as a promising biomaterial for bone regeneration; however, bone remodeling is influenced by bone resorption and little is known about the effect of cell-derived ECM on osteoclast differentiation. Cell-derived ECM improved BMM proliferation but potently inhibited osteoclast differentiation. ECM-mediated attenuation of intracellular reactive oxygen species was suggested to play a rival role in osteoclastogenesis. Fibronectin in cell-derived ECM also contributed to ECM-mediated anti-osteoclastogenesis. The anti-osteoclastogenic property of cell-derived ECM may benefit clinically for modulating bone remodeling and promoting bone tissue engineering.

Delivery of cellular factors to regulate bone healing

Bone tissue has a strong intrinsic regenerative capacity, thanks to a delicate and complex interplay of cellular and molecular processes, which tightly involve the immune system. Pathological settings of anatomical, biomechanical or inflammatory nature may lead to impaired bone healing. Innovative strategies to enhance bone repair, including the delivery of osteoprogenitor cells or of potent cytokines/morphogens, indicate the potential of 'orthobiologics', but are not fully satisfactory. Here, we review different approaches based on the delivery of regenerative cues produced by cells but in cell-free, possibly off-the-shelf configurations. Such strategies exploit the paracrine effect of the secretome of mesenchymal stem/stromal cells, presented in soluble form, shuttled through extracellular vesicles, or embedded within the network of extracellular matrix molecules. In addition to osteoinductive molecules, attention is given to factors targeting the resident immune cells, to reshape inflammatory and immunity processes from scarring to regenerative patterns.

Decellularized orthopaedic tissue-engineered grafts: biomaterial scaffolds synthesised by therapeutic cells

In orthopaedic surgery, the reconstruction of musculoskeletal defects is a constant challenge.

The Challenge in Using Mesenchymal Stromal Cells for Recellularization of Decellularized Cartilage

Some decellularized musculoskeletal extracellular matrices (ECM)s derived from tissues such as bone, tendon and fibrocartilaginous meniscus have already been clinical use for tissue reconstruction. Repair of articular cartilage with its unique zonal ECM architecture and composition is still an unsolved problem, and the question is whether allogenic or xenogeneic decellularized cartilage ECM could serve as a biomimetic scaffold for this purpose.Hence, this survey outlines the present state of preparing decellularized cartilage ECM-derived scaffolds or composites for reconstruction of different cartilage types and of reseeding it particularly with mesenchymal stromal cells (MSCs).The preparation of natural decellularized cartilage ECM scaffolds hampers from the high density of the cartilage ECM and lacking interconnectivity of the rather small natural pores within it: the chondrocytes lacunae. Nevertheless, the reseeding of decellularized ECM scaffolds before implantation provided superior results compared with simply implanting cell-free constructs in several other tissues, but cartilage recellularization remains still challenging. Induced by cartilage ECM-derived scaffolds MSCs underwent chondrogenesis.Major problems to be addressed for the application of cell-free cartilage were discussed such as to maintain ECM structure, natural chemistry, biomechanics and to achieve a homogenous and stable cell recolonization, promote chondrogenic and prevent terminal differentiation (hypertrophy) and induce the deposition of a novel functional ECM. Some promising approaches were proposed including further processing of the decellularized ECM before recellularization of the ECM with MSCs, co-culturing of MSCs with chondrocytes and establishing bioreactor culture e.g. with mechanostimulation, flow perfusion pressure and lowered oxygen tension. Graphical Abstract Synopsis of tissue engineering approaches based on cartilage-derived ECM.

An astrocyte derived extracellular matrix coating reduces astrogliosis surrounding chronically implanted microelectrode arrays in rat cortex

Available evidence suggests that the magnitude of the foreign body response (FBR) to implants placed in cortical brain tissue is affected by the extent of vasculature damage following device insertion and the magnitude of the ensuing macrophage response. Since the extracellular matrix (ECM) serves as a natural hemostatic and immunomodulatory agent, we examined the ability of an FDA-approved neurosurgical hemostatic coating and an ECM coating derived from primary rat astrocytes to reduce the FBR surrounding a penetrating microelectrode array chronically implanted in rat cortex. Using quantitative methods, we examined various components of the FBR in vitro and after implantation. In vitro assays showed that both coatings accelerated coagulation in a similar fashion but only the astrocyte-derived material suppressed macrophage activation. In addition, the ECM coating derived from astrocytes, also decreased the astrogliotic response 8 weeks after implantation. Neither coating had a significant influence on the intensity or spatial distribution of FBR biomarkers 1 week after implantation or on degree of macrophage activation or neuronal survival at the later time point. The results show that microelectrode coatings with similar hemostatic properties but different immunomodulatory characteristics differentially affect the FBR to an anchored, single-shank, silicon microelectrode array. The results also support the concept that divergent biological pathways affect the various components of the FBR in the CNS and suggests that decreasing its impact will require a multifaceted approach.

Engineering of an angiogenic niche by perfusion culture of adipose-derived stromal vascular fraction cells

In vitro recapitulation of an organotypic stromal environment, enabling efficient angiogenesis, is crucial to investigate and possibly improve vascularization in regenerative medicine. Our study aims at engineering the complexity of a vascular milieu including multiple cell-types, a stromal extracellular matrix (ECM), and molecular signals. For this purpose, the human adipose stromal vascular fraction (SVF), composed of a heterogeneous mix of pericytes, endothelial/stromal progenitor cells, was cultured under direct perfusion flow on three-dimensional (3D) collagen scaffolds. Perfusion culture of SVF-cells reproducibly promoted in vitro the early formation of a capillary-like network, embedded within an ECM backbone, and the release of numerous pro-angiogenic factors. Compared to static cultures, perfusion-based engineered constructs were more rapidly vascularized and supported a superior survival of delivered cells upon in vivo ectopic implantation. This was likely mediated by pericytes, whose number was significantly higher (4.5-fold) under perfusion and whose targeted depletion resulted in lower efficiency of vascularization, with an increased host foreign body reaction. 3D-perfusion culture of SVF-cells leads to the engineering of a specialized milieu, here defined as an angiogenic niche. This system could serve as a model to investigate multi-cellular interactions in angiogenesis, and as a module supporting increased grafted cell survival in regenerative medicine.

* Three-Dimensional Bioprinting of Polycaprolactone Reinforced Gene Activated Bioinks for Bone Tissue Engineering

Regeneration of complex bone defects remains a significant clinical challenge. Multi-tool biofabrication has permitted the combination of various biomaterials to create multifaceted composites with tailorable mechanical properties and spatially controlled biological function. In this study we sought to use bioprinting to engineer nonviral gene activated constructs reinforced by polymeric micro-filaments. A gene activated bioink was developed using RGD-γ-irradiated alginate and nano-hydroxyapatite (nHA) complexed to plasmid DNA (pDNA). This ink was combined with bone marrow-derived mesenchymal stem cells (MSCs) and then co-printed with a polycaprolactone supporting mesh to provide mechanical stability to the construct. Reporter genes were first used to demonstrate successful cell transfection using this system, with sustained expression of the transgene detected over 14 days postbioprinting. Delivery of a combination of therapeutic genes encoding for bone morphogenic protein and transforming growth factor promoted robust osteogenesis of encapsulated MSCs in vitro, with enhanced levels of matrix deposition and mineralization observed following the incorporation of therapeutic pDNA. Gene activated MSC-laden constructs were then implanted subcutaneously, directly postfabrication, and were found to support superior levels of vascularization and mineralization compared to cell-free controls. These results validate the use of a gene activated bioink to impart biological functionality to three-dimensional bioprinted constructs.

The host response to naturally-derived extracellular matrix biomaterials

Biomaterials based on natural materials including decellularized tissues and tissue-derived hydrogels are becoming more widely used for clinical applications. Because of their native composition and structure, these biomaterials induce a distinct form of the foreign body response that differs from that of non-native biomaterials. Differences include direct interactions with cells via preserved moieties as well as the ability to undergo remodeling. Moreover, these biomaterials could elicit adaptive immune responses due to the presence of modified native molecules. Therefore, these biomaterials present unique challenges in terms of understanding the progression of the foreign body response. This review covers this response to natural materials including natural polymers, decellularized tissues, cell-derived matrix, tissue derived hydrogels, and biohybrid materials. With the expansion of the fields of regenerative medicine and tissue engineering, the current repertoire of biomaterials has also expanded and requires continuous investigation of the responses they elicit.

Fabrication and Characterization of Decellularized Periodontal Ligament Cell Sheet Constructs

Decellularized tissue-engineered constructs have the potential to promote regeneration by providing a biomimetic extracellular matrix that directs tissue-specific regeneration when implanted in situ. Recently, the use of cell sheets has shown promising results in promoting periodontal regeneration. Here, we describe the fabrication of decellularized periodontal cell sheets with intact extracellular matrix structural and biological properties. Melt electro spun polycaprolactone (PCL) scaffolds are used as a carrier for the inherently fragile cell sheets, to provide support during the processes of decellularization. An optimized decellularization method is outlined using perfusion with a combination of NH₄OH and Triton X-100 together with a DNase treatment step for DNA removal. The maintenance of extracellular matrix structural and biological integrity is important, and here we describe the assessment of these properties using immunostaining for extracellular matrix proteins and ELISA for growth factor quantification.

In vitro osteogenic induction of bone marrow mesenchymal stem cells with a decellularized matrix derived from human adipose stem cells and in vivo implantation for bone regeneration

Tissue engineering technology that adopts mesenchymal stem cells combined with scaffolds presents a promising strategy for tissue regeneration.

The extracellular microscape governs mesenchymal stem cell fate

Each cell forever interacts with its extracellular matrix (ECM); a stem cell relies on this interaction to guide differentiation. The stiffness, nanotopography, protein composition, stress and strain inherent to any given ECM influences stem cell lineage commitment. This interaction is dynamic, multidimensional and reciprocally evolving through time, and from this concerted exchange the macroscopic tissues that comprise living organisms are formed. Mesenchymal stem cells can give rise to bone, cartilage, tendon and muscle; thus attempts to manipulate their differentiation must heed the physical properties of incredibly complex native microenvironments to realize regenerative goals.

Devitalisation of human cartilage by high hydrostatic pressure treatment: Subsequent cultivation of chondrocytes and mesenchymal stem cells on the devitalised tissue

The regeneration of cartilage lesions still represents a major challenge. Cartilage has a tissue-specific architecture, complicating recreation by synthetic biomaterials. A novel approach for reconstruction is the use of devitalised cartilage. Treatment with high hydrostatic pressure (HHP) achieves devitalisation while biomechanical properties are remained. Therefore, in the present study, cartilage was devitalised using HHP treatment and the potential for revitalisation with chondrocytes and mesenchymal stem cells (MSCs) was investigated. The devitalisation of cartilage was performed by application of 480 MPa over 10 minutes. Effective cellular inactivation was demonstrated by the trypan blue exclusion test and DNA quantification. Histology and electron microscopy examinations showed undamaged cartilage structure after HHP treatment. For revitalisation chondrocytes and MSCs were cultured on devitalised cartilage without supplementation of chondrogenic growth factors. Both chondrocytes and MSCs significantly increased expression of cartilage-specific genes. ECM stainings showed neocartilage-like structure with positive AZAN staining as well as collagen type II and aggrecan deposition after three weeks of cultivation. Our results showed that HHP treatment caused devitalisation of cartilage tissue. ECM proteins were not influenced, thus, providing a scaffold for chondrogenic differentiation of MSCs and chondrocytes. Therefore, using HHP-treated tissue might be a promising approach for cartilage repair.

Methods of Monitoring Cell Fate and Tissue Growth in Three-Dimensional Scaffold-Based Strategies for In Vitro Tissue Engineering

In the field of tissue engineering, there is a need for methods that allow assessing the performance of tissue-engineered constructs noninvasively in vitro and in vivo. To date, histological analysis is the golden standard to retrieve information on tissue growth, cellular distribution, and cell fate on tissue-engineered constructs after in vitro cell culture or on explanted specimens after in vivo applications. Yet, many advances have been made to optimize imaging techniques for monitoring tissue-engineered constructs with a sub-mm or μm resolution. Many imaging modalities have first been developed for clinical applications, in which a high penetration depth has been often more important than lateral resolution. In this study, we have reviewed the current state of the art in several imaging approaches that have shown to be promising in monitoring cell fate and tissue growth upon in vitro culture. Depending on the aimed tissue type and scaffold properties, some imaging methods are more applicable than others. Optical methods are mostly suited for transparent materials such as hydrogels, whereas magnetic resonance-based methods are mostly applied to obtain contrast between hard and soft tissues regardless of their transparency. Overall, this review shows that the field of imaging in scaffold-based tissue engineering is developing at a fast pace and has the potential to overcome the limitations of destructive endpoint analysis.