Subcellular stretch-induced cytoskeletal response of single fibroblasts within 3D designer scaffolds

A 3D micro-printed single cell micro-niche with asymmetric niche signals - An in vitro model for asymmetric cell division study

Intricate microenvironment signals orchestrate to affect cell behavior and fate during tissue morphogenesis. However, the underlying mechanisms on how specific local niche signals influence cell behavior and fate are not fully understood, owing to the lack of in vitro platform able to precisely, quantitatively, spatially, and independently manipulate individual niche signals. Here, microarrays of protein-based 3D single cell micro-niche (3D-SCμN), with precisely engineered biophysical and biochemical niche signals, are micro-printed by a multiphoton microfabrication and micropatterning technology. Mouse embryonic stem cell (mESC) is used as the model cell to study how local niche signals affect stem cell behavior and fate. By precisely engineering the internal microstructures of the 3D SCμNs, we demonstrate that the cell division direction can be controlled by the biophysical niche signals, in a cell shape-independent manner. After confining the cell division direction to a dominating axis, single mESCs are exposed to asymmetric biochemical niche signals, specifically, cell-cell adhesion molecule on one side and extracellular matrix on the other side. We demonstrate that, symmetry-breaking (asymmetric) niche signals successfully trigger cell polarity formation and bias the orientation of asymmetric cell division, the mitosis process resulting in two daughter cells with differential fates, in mESCs.

Microflow multi-layer diffraction optical element processed by hybrid manufacturing technology

Traditional planar diffractive optical elements (DOEs) are challenged in imaging systems due to diffraction efficiency and chromatic dispersion. In this paper, we have designed a microfluidic diffractive optical element (MFDOE), which is processed by digital micromirror device (DMD) maskless lithography (DMDML) assisted femtosecond laser direct writing (FsLDW). MFDOE is a combination of photoresist-based multi-layer harmonic diffraction surface and liquid, realizing diffraction efficiency of more than 90% in the visible band. And it shows achromatic characteristics in the two bands of 469 nm (±20 nm) and 625 nm (±20 nm). These results show that MFDOE has good imaging performance.

Dynamics of Endothelial Engagement and Filopodia Formation in Complex 3D Microscaffolds

The understanding of endothelium–extracellular matrix interactions during the initiation of new blood vessels is of great medical importance; however, the mechanobiological principles governing endothelial protrusive behaviours in 3D microtopographies remain imperfectly understood. In blood capillaries submitted to angiogenic factors (such as vascular endothelial growth factor, VEGF), endothelial cells can transiently transdifferentiate in filopodia-rich cells, named tip cells, from which angiogenesis processes are locally initiated. This protrusive state based on filopodia dynamics contrasts with the lamellipodia-based endothelial cell migration on 2D substrates. Using two-photon polymerization, we generated 3D microstructures triggering endothelial phenotypes evocative of tip cell behaviour. Hexagonal lattices on pillars (“open”), but not “closed” hexagonal lattices, induced engagement from the endothelial monolayer with the generation of numerous filopodia. The development of image analysis tools for filopodia tracking allowed to probe the influence of the microtopography (pore size, regular vs. elongated structures, role of the pillars) on orientations, engagement and filopodia dynamics, and to identify MLCK (myosin light-chain kinase) as a key player for filopodia-based protrusive mode. Importantly, these events occurred independently of VEGF treatment, suggesting that the observed phenotype was induced through microtopography. These microstructures are proposed as a model research tool for understanding endothelial cell behaviour in 3D fibrillary networks.

3D printing of functional microrobots

3D printing (also called "additive manufacturing" or "rapid prototyping") is able to translate computer-aided and designed virtual 3D models into 3D tangible constructs/objects through a layer-by-layer deposition approach. Since its introduction, 3D printing has aroused enormous interest among researchers and engineers to understand the fabrication process and composition-structure-property correlation of printed 3D objects and unleash its great potential for application in a variety of industrial sectors. Because of its unique technological advantages, 3D printing can definitely benefit the field of microrobotics and advance the design and development of functional microrobots in a customized manner. This review aims to present a generic overview of 3D printing for functional microrobots. The most applicable 3D printing techniques, with a focus on laser-based printing, are introduced for the 3D microfabrication of microrobots. 3D-printable materials for fabricating microrobots are reviewed in detail, including photopolymers, photo-crosslinkable hydrogels, and cell-laden hydrogels. The representative applications of 3D-printed microrobots with rational designs heretofore give evidence of how these printed microrobots are being exploited in the medical, environmental, and other relevant fields. A future outlook on the 3D printing of microrobots is also provided.

Engineering Biomaterials and Approaches for Mechanical Stretching of Cells in Three Dimensions

Mechanical stretch is widely experienced by cells of different tissues in the human body and plays critical roles in regulating their behaviors. Numerous studies have been devoted to investigating the responses of cells to mechanical stretch, providing us with fruitful findings. However, these findings have been mostly observed from two-dimensional studies and increasing evidence suggests that cells in three dimensions may behave more closely to their in vivo behaviors. While significant efforts and progresses have been made in the engineering of biomaterials and approaches for mechanical stretching of cells in three dimensions, much work remains to be done. Here, we briefly review the state-of-the-art researches in this area, with focus on discussing biomaterial considerations and stretching approaches. We envision that with the development of advanced biomaterials, actuators and microengineering technologies, more versatile and predictive three-dimensional cell stretching models would be available soon for extensive applications in such fields as mechanobiology, tissue engineering, and drug screening.

Mechanical stimulation of single cells by reversible host-guest interactions in 3D microscaffolds

Many essential cellular processes are regulated by mechanical properties of their microenvironment. Here, we introduce stimuli-responsive composite scaffolds fabricated by three-dimensional (3D) laser lithography to simultaneously stretch large numbers of single cells in tailored 3D microenvironments. The key material is a stimuli-responsive photoresist containing cross-links formed by noncovalent, directional interactions between β-cyclodextrin (host) and adamantane (guest). This allows reversible actuation under physiological conditions by application of soluble competitive guests. Cells adhering in these scaffolds build up initial traction forces of ~80 nN. After application of an equibiaxial stretch of up to 25%, cells remodel their actin cytoskeleton, double their traction forces, and equilibrate at a new dynamic set point within 30 min. When the stretch is released, traction forces gradually decrease until the initial set point is retrieved. Pharmacological inhibition or knockout of nonmuscle myosin 2A prevents these adjustments, suggesting that cellular tensional homeostasis strongly depends on functional myosin motors.

Biomedical Application of Functional Materials in Organ-on-a-Chip

The organ-on-a-chip (OOC) technology has been utilized in a lot of biomedical fields such as fundamental physiological and pharmacological researches. Various materials have been introduced in OOC and can be broadly classified into inorganic, organic, and hybrid materials. Although PDMS continues to be the preferred material for laboratory research, materials for OOC are constantly evolving and progressing, and have promoted the development of OOC. This mini review provides a summary of the various type of materials for OOC systems, focusing on the progress of materials and related fabrication technologies within the last 5 years. The advantages and drawbacks of these materials in particular applications are discussed. In addition, future perspectives and challenges are also discussed.

Functional Materials for Two-Photon Polymerization in Microfabrication

Direct laser writing methods based on two-photon polymerization (2PP) are powerful tools for the on-demand printing of precise and complex 3D architectures at the micro and nanometer scale. While much progress was made to increase the resolution and the feature size throughout the years, by carefully designing a material, one can confer specific functional properties to the printed structures thus making them appealing for peculiar and novel applications. This Review summarizes the state-of-the-art of functional resins and photoresists used in 2PP, discussing both the range of material functions available and the methods used to prepare them, highlighting advantages and disadvantages of different classes of materials in achieving certain properties.

3D microfluidics via cyclic olefin polymer-based in situ direct laser writing

In situ direct laser writing (isDLW) strategies that facilitate the printing of three-dimensional (3D) nanostructured components directly inside of, and fully sealed to, enclosed microchannels are uniquely suited for manufacturing geometrically complex microfluidic technologies. Recent efforts have demonstrated the benefits of using micromolding and bonding protocols for isDLW; however, the reliance on polydimethylsiloxane (PDMS) leads to limited fluidic sealing (e.g., operational pressures <50-75 kPa) and poor compatibility with standard organic solvent-based developers. To bypass these issues, here we explore the use of cyclic olefin polymer (COP) as an enabling microchannel material for isDLW by investigating three fundamental classes of microfluidic systems corresponding to increasing degrees of sophistication: (i) "2.5D" functionally static fluidic barriers (10-100 μm in height), which supported uncompromised structure-to-channel sealing under applied input pressures of up to 500 kPa; (ii) 3D static interwoven microvessel-inspired structures (inner diameters < 10 μm) that exhibited effective isolation of distinct fluorescently labelled microfluidic flow streams; and (iii) 3D dynamically actuated microfluidic transistors, which comprised bellowed sealing elements (wall thickness = 500 nm) that could be actively deformed via an applied gate pressure to fully obstruct source-to-drain fluid flow. In combination, these results suggest that COP-based isDLW offers a promising pathway to wide-ranging fluidic applications that demand significant architectural versatility at submicron scales with invariable sealing integrity, such as for biomimetic organ-on-a-chip systems and integrated microfluidic circuits.

A facile multi-material direct laser writing strategy

Direct laser writing (DLW) is a three-dimensional (3D) manufacturing technology that offers vast architectural control at submicron scales, yet remains limited in cases that demand microstructures comprising more than one material. Here we present an accessible microfluidic multi-material DLW (μFMM-DLW) strategy that enables 3D nanostructured components to be printed with average material registration accuracies of 100 ± 70 nm (ΔX) and 190 ± 170 nm (ΔY) - a significant improvement versus conventional multi-material DLW methods. Results for printing 3D microstructures with up to five materials suggest that μFMM-DLW can be utilized in applications that demand geometrically complex, multi-material microsystems, such as for photonics, meta-materials, and 3D cell biology.

Engineering hiPSC cardiomyocyte in vitro model systems for functional and structural assessment

The study of human cardiomyopathies and the development and testing of new therapies has long been limited by the availability of appropriate in vitro model systems. Cardiomyocytes are highly specialized cells whose internal structure and contractile function are sensitive to the local microenvironment and the combination of mechanical and biochemical cues they receive. The complementary technologies of human induced pluripotent stem cell (hiPSC) derived cardiomyocytes (CMs) and microphysiological systems (MPS) allow for precise control of the genetics and microenvironment of human cells in in vitro contexts. These combined systems also enable quantitative measurement of mechanical function and intracellular organization. This review describes relevant factors in the myocardium microenvironment that affect CM structure and mechanical function and demonstrates the application of several engineered microphysiological systems for studying development, disease, and drug discovery.

Emerging Trends in Information-Driven Engineering of Complex Biological Systems

Synthetic biological systems are used for a myriad of applications, including tissue engineered constructs for in vivo use and microengineered devices for in vitro testing. Recent advances in engineering complex biological systems have been fueled by opportunities arising from the combination of bioinspired materials with biological and computational tools. Driven by the availability of large datasets in the "omics" era of biology, the design of the next generation of tissue equivalents will have to integrate information from single-cell behavior to whole organ architecture. Herein, recent trends in combining multiscale processes to enable the design of the next generation of biomaterials are discussed. Any successful microprocessing pipeline must be able to integrate hierarchical sets of information to capture key aspects of functional tissue equivalents. Micro- and biofabrication techniques that facilitate hierarchical control as well as emerging polymer candidates used in these technologies are also reviewed.

3D Scaffolds to Study Basic Cell Biology

Mimicking the properties of the extracellular matrix is crucial for developing in vitro models of the physiological microenvironment of living cells. Among other techniques, 3D direct laser writing (DLW) has emerged as a promising technology for realizing tailored 3D scaffolds for cell biology studies. Here, results based on DLW addressing basic biological issues, e.g., cell-force measurements and selective 3D cell spreading on functionalized structures are reviewed. Continuous future progress in DLW materials engineering and innovative approaches for scaffold fabrication will enable further applications of DLW in applied biomedical research and tissue engineering.

Potassium hydroxide treatment of UV-curable polysiloxane-type polymer for reproducible enhancement of cell adhesion and survival

Polysiloxanes have shown exquisite properties for fabrication of microstructures for various biomedical and biotechnological applications. Nevertheless, their biocompatibility in terms of cell adhesion and survival ability is controversial. A simple polysiloxane modifying procedure that reproducibly enhances cell adhesion was proposed. Sonication of the hybrid organic-inorganic polymer of polysiloxane type, Ormocomp, in potassium hydroxide (KOH)/ethanol solution enhanced adhesion and subsequent survival of a panel of four cell lines. Characterization of surface properties of untreated and KOH-treated Ormocomp coatings has revealed considerable negative charge of Ormocomp substrates based on measurements of zeta potentials. KOH treatment did not modify surface morphology as visualized by scanning electron microscopy, but it resulted in alteration in both chemical composition according to SIMS analysis and hydrophilicity evaluated by static water contact angles. The results suggest that the failure of the adherent cells to survive on Ormocomp coatings is related to cell adhesion. The negative surface charge of Ormocomp substrates may be one of the influencing factors; however, the modification of surface chemistry mediated by KOH and the resulting increase in hydrophilicity accompanied by modification of protein adsorption are more likely responsible for enhanced cell adhesion and survival on Ormocomp coatings. KOH treatment thus may serve as a simple, cost-effective procedure modifying polysiloxane-type polymers that leads to reproducible enhancement of cell adhesion.

Microtopographies control the development of basal protrusions in epithelial sheets

Cells are able to develop various types of membrane protrusions that modulate their adhesive, migratory, or functional properties. However, their ability to form basal protrusions, particularly in the context of epithelial sheets, is not widely characterized. The authors built hexagonal lattices to probe systematically the microtopography-induced formation of epithelial cell protrusions. Lattices of hexagons of various sizes (from 1.5 to 19 μm) and 5-10 μm height were generated by two-photon photopolymerization in NOA61 or poly(ethylene glycol) diacrylate derivatives. The authors found that cells generated numerous, extensive, and deep basal protrusions for hexagons inferior to cell size (3-10 μm) while maintaining a continuous epithelial layer above structures. They characterized the kinetics of protrusion formation depending on scaffold geometry and size. The reported formation of extensive protrusions in 3D microtopography could be beneficial to develop new biomaterials with increased adhesive properties or to improve tissue engineering.

Techniques to stimulate and interrogate cell-cell adhesion mechanics

Cell-cell adhesions maintain the mechanical integrity of multicellular tissues and have recently been found to act as mechanotransducers, translating mechanical cues into biochemical signals. Mechanotransduction studies have primarily focused on focal adhesions, sites of cell-substrate attachment. These studies leverage technical advances in devices and systems interfacing with living cells through cell-extracellular matrix adhesions. As reports of aberrant signal transduction originating from mutations in cell-cell adhesion molecules are being increasingly associated with disease states, growing attention is being paid to this intercellular signaling hub. Along with this renewed focus, new requirements arise for the interrogation and stimulation of cell-cell adhesive junctions. This review covers established experimental techniques for stimulation and interrogation of cell-cell adhesion from cell pairs to monolayers.

Multiphoton-Polymerized 3D Protein Assay

Multiphoton polymerization (MPP) enables 3D fabrication of micro- and nanoscale devices with complex geometries. Using MPP, we create a 3D platform for protein assays. Elevating the protein-binding sites above the substrate surface allows an optically sectioned readout, minimizing the inevitable background signal from nonspecific protein adsorption at the substrate surface. Two fluorescence-linked immunosorbent assays are demonstrated, the first one relying on streptavidin-biotin recognition and the second one on antibody recognition of apolipoprotein A1, a major constituent of high-density lipoprotein particles. Signal-to-noise ratios exceeding 1000 were achieved. The platform has high potential for 3D multiplexed recognition assays with an increased binding surface for on-chip flow cells.

3D Laser Micro- and Nanoprinting: Challenges for Chemistry

3D printing is a powerful emerging technology for the tailored fabrication of advanced functional materials. This Review summarizes the state-of-the art with regard to 3D laser micro- and nanoprinting and explores the chemical challenges limiting its full exploitation: from the development of advanced functional materials for applications in cell biology and electronics to the chemical barriers that need to be overcome to enable fast writing velocities with resolution below the diffraction limit. We further explore chemical means to enable direct laser writing of multiple materials in one resist by highly wavelength selective (λ-orthogonal) photochemical processes. Finally, chemical processes to construct adaptive 3D written structures that are able to respond to external stimuli, such as light, heat, pH value, or specific molecules, are highlighted, and advanced concepts for degradable scaffolds are explored.

3D Chemical Patterning of Micromaterials for Encoded Functionality

Programming local chemical properties of microscale soft materials with 3D complex shapes is indispensable for creating sophisticated functionalities, which has not yet been possible with existing methods. Precise spatiotemporal control of two-photon crosslinking is employed as an enabling tool for 3D patterning of microprinted structures for encoding versatile chemical moieties.

Multi-Component Microscaffold With 3D Spatially Defined Proteinaceous Environment

In this paper, we present a multicomponent microenvironment consisting of proteinaceous networks with submicron-sized features optionally embedded into a photoresist microscaffold. By two-photon direct laser writing, free-standing 3D proteinaceous microstructures were fabricated for cell culture application, demonstrated with NIH/3T3 fibroblast cells. A Young's modulus of megapascal-order contributes to the challenge of structural sustainability of the proteinaceous microstructures for experiments as well as sequential fabrication steps. We propose to embed proteinaceous networks into a mechanically robust photoresist microscaffold. We investigate the limits of this 3D microfabrication of embedded proteinaceous networks and demonstrate the embedment of two different proteinaceous networks within one microscaffold. Performing cell culture of PC12 cells, we observe cell adhesion and cell motility on embedded proteinaceous networks of collagen type-IV mixed with bovine serum albumin into a photoresist microscaffold. The ability to structure proteinaceous elements for 3D spatial control of microenvironment might be a key feature in cell culture to decouple environmental cues to control cellular behavior.

Post-print UV curing method for improving the mechanical properties of prototypes derived from two-photon lithography

Two photon polymerization (TPP) is a precise, reliable, and increasingly popular technique for rapid prototyping of micro-scale parts with sub-micron resolution. The materials of choice underlying this process are predominately acrylic resins cross-linked via free-radical polymerization. Due to the nature of the printing process, the derived parts are only partially cured and the corresponding mechanical properties, i.e. modulus and ultimate strength, are lower than if the material were cross-linked to the maximum extent. Herein, post-print curing via UV-driven radical generation, is demonstrated to increase the overall degree of cross-linking of low density, TPP-derived structures.

Microsurgery-aided in-situ force probing reveals extensibility and viscoelastic properties of individual stress fibers

Actin-myosin filament bundles (stress fibers) are critical for tension generation and cell shape, but their mechanical properties are difficult to access. Here we propose a novel approach to probe individual peripheral stress fibers in living cells through a microsurgically generated opening in the cytoplasm. By applying large deformations with a soft cantilever we were able to fully characterize the mechanical response of the fibers and evaluate their tension, extensibility, elastic and viscous properties.

Stimulated Emission Depletion Lithography with Mercapto-Functional Polymers

Surface reactive nanostructures were fabricated using stimulated emission depletion (STED) lithography. The functionalization of the nanostructures was realized by copolymerization of a bifunctional metal oxo cluster in the presence of a triacrylate monomer. Ligands of the cluster surface cross-link to the monomer during the lithographic process, whereas unreacted mercapto functionalized ligands are transferred to the polymer and remain reactive after polymer formation of the surface of the nanostructure. The depletion efficiency in dependence of the cluster loading was investigated and full depletion of the STED effect was observed with a cluster loading exceeding 4 wt %. A feature size by λ/11 was achieved by using a donut-shaped depletion beam. The reactivity of the mercapto groups on the surface of the nanostructure was tested by incubation with mercapto-reactive fluorophores.

A Role for 3D Printing in Kidney-on-a-Chip Platforms

The advancement of "kidney-on-a-chip" platforms - submillimeter-scale fluidic systems designed to recapitulate renal functions in vitro - directly impacts a wide range of biomedical fields, including drug screening, cell and tissue engineering, toxicity testing, and disease modelling. To fabricate kidney-on-a-chip technologies, researchers have primarily adapted traditional micromachining techniques that are rooted in the integrated circuit industry; hence the term, "chip." A significant challenge, however, is that such methods are inherently monolithic, which limits one's ability to accurately recreate the geometric and architectural complexity of the kidney in vivo. Better reproduction of the anatomical complexity of the kidney will allow for more instructive modelling of physiological and pathophysiological events. Emerging additive manufacturing or "three-dimensional (3D) printing" techniques could provide a promising alternative to conventional methodologies. In this article, we discuss recent progress in the development of both kidney-on-a-chip platforms and state-of-the-art submillimeter-scale 3D printing methods, with a focus on biophysical and architectural capabilities. Lastly, we examine the potential for 3D printing-based approaches to extend the efficacy of kidney-on-a-chip systems.

Three Dimensional and Homogenous Single Cell Cyclic Stretch within a Magnetic Micropillar Array (mMPA) for a Cell Proliferation Study

The physical properties of the extracellular matrix (ECM) are a key aspect of the cell microenvironment. A biological system is a highly dynamic organization. In our study, we designed and prepared a large area of magnetic PDMS elastomer micropillar array (mMPA) with robust and tunable movement for cell mechanics study. The rotational movement frequency of the micropillars could be precisely controlled by a home-built magnetic actuation apparatus. Cells cultured in the mMPA could be suspended in between two micropillars in a single level and exhibited a 3D structure. With the rotational movement of the micropillar, a homogeneous stretchable force could be applied to a single cell along it long axis with various frequencies. We exclusively studied the influence of dynamic properties of the micropillar movement on cell behaviors. We found that, by fixing the amplitude of the stretchable force, the frequency-based properties of the cell microenvironment could significantly change cell functions. The cell behaviors are dependent on the micropillar movement frequency and a transition from proliferation to apoptosis/death exhibited with the increment of the force application frequency.