The two faces of metal ions: From implants rejection to tissue repair/regeneration

Endogenous Tissue Engineering for Chondral and Osteochondral Regeneration: Strategies and Mechanisms

Increasing attention has been paid to the development of effective strategies for articular cartilage (AC) and osteochondral (OC) regeneration due to their limited self-reparative capacities and the shortage of timely and appropriate clinical treatments. Traditional cell-dependent tissue engineering faces various challenges such as restricted cell sources, phenotypic alterations, and immune rejection. In contrast, endogenous tissue engineering represents a promising alternative, leveraging acellular biomaterials to guide endogenous cells to the injury site and stimulate their intrinsic regenerative potential. This review provides a comprehensive overview of recent advancements in endogenous tissue engineering strategies for AC and OC regeneration, with a focus on the tissue engineering triad comprising endogenous stem/progenitor cells (ESPCs), scaffolds, and biomolecules. Multiple types of ESPCs present within the AC and OC microenvironment, including bone marrow-derived mesenchymal stem cells (BMSCs), adipose-derived mesenchymal stem cells (AD-MSCs), synovial membrane-derived mesenchymal stem cells (SM-MSCs), and AC-derived stem/progenitor cells (CSPCs), exhibit the ability to migrate toward injury sites and demonstrate pro-regenerative properties. The fabrication and characteristics of scaffolds in various formats including hydrogels, porous sponges, electrospun fibers, particles, films, multilayer scaffolds, bioceramics, and bioglass, highlighting their suitability for AC and OC repair, are systemically summarized. Furthermore, the review emphasizes the pivotal role of biomolecules in facilitating ESPCs migration, adhesion, chondrogenesis, osteogenesis, as well as regulating inflammation, aging, and hypertrophy-critical processes for endogenous AC and OC regeneration. Insights into the applications of endogenous tissue engineering strategies for in vivo AC and OC regeneration are provided along with a discussion on future perspectives to enhance regenerative outcomes.

Chronic exposure to TiO2 micro- and nano particles: A biochemical and histopathological experimental study

The aim of this work was to analyze the effects of long-term exposure to titanium dioxide (TiO2) micro- (MPs) and nanoparticles (NPs) (six and 12 months) on the biochemical and histopathological response of target organs using a murine model. Male Wistar rats were intraperitoneally injected with a suspension of TiO2 NPs (5 nm; TiO2-NP5 group) or MPs (45 μm; TiO2-NP5 group); the control group was injected with saline solution. Six and 12 months post-injection, titanium (Ti) concentration in plasma and target organs was determined spectrometrically (ICP-MS). Blood smears and organ tissue samples were evaluated by light microscopy. Liver and kidney function was evaluated using serum biochemical parameters. Oxidative metabolism was assessed 6 months post-injection (determination of superoxide anion by nitroblue tetrazolium (NBT) test, superoxide dismutase (SOD) and catalase (CAT), lipid peroxidation, and paraoxonase 1). Titanium (Ti) concentration in target organs and plasma was significantly higher in the TiO2-exposed groups than in the control group. Histological evaluation showed the presence of titanium-based particles in the target organs, which displayed no structural alterations, and in blood monocytes. Oxidative metabolism analysis showed that TiO2 NPs were more reactive over time than MPs (p < .05) and mobilization of antioxidant enzymes and membrane damage varied among the studied organs. Clearance of TiO2 micro and nanoparticles differed among the target organs, and lung clearance was more rapid than clearance from the lungs and kidneys (p < .05). Conversely, Ti concentration in plasma increased with time (p < .05). In conclusion, neither serum biochemical parameters nor oxidative metabolism markers appear to be useful as biomarkers of tissue damage in response to TiO2 micro- and nanoparticle deposits at chronic time points.

Healing with precision: A multi-functional hydrogel-bioactive glass dressing boosts infected wound recovery and enhances neurogenesis in the wound bed

Chronic skin wounds, especially infected ones, pose a significant clinical challenge due to their increasing incidence and poor outcomes. The deteriorative microenvironment in such wounds, characterized by reduced extracellular matrix, impaired angiogenesis, insufficient neurogenesis, and persistent bacterial infection, has prompted the exploration of novel therapeutic strategies. In this study, we developed an injectable multifunctional hydrogel (GEL/BG@Cu + Mg) incorporating Gelatin-Tannic acid/ N-hydroxysuccinimide functionalized polyethylene glycol and Bioactive glass doped with copper and magnesium ions to accelerate the healing of infected wounds. The GEL/BG@Cu + Mg hydrogel composite demonstrates good biocompatibility, degradability, and rapid formation of a protective barrier to stop bleeding. Synergistic bactericidal effects are achieved through the photothermal properties of BG@Cu + Mg and sustained copper ions release, with the latter further promoting angiogenesis. Furthermore, the hydrogel enhances neurogenesis by stimulating axons and Schwann cells in the wound bed through the beneficial effects of magnesium ions. Our results demonstrate that the designed novel multifunctional hydrogel holds tremendous promise for treating infected wounds and allowing regenerative neurogenesis at the wound site, which provides a viable alternative for further improving clinical outcomes.

Sex-specific associations of urinary mixed-metal concentrations with femoral bone mineral density among older people: an NHANES (2017-2020) analysis

Background

Heavy metal exposure is an important cause of reduced bone mineral density (BMD). Epidemiological studies focusing on the effects of mixed heavy metal exposure on BMD in middle-aged and older people are scarce. In single-metal studies, men and women have shown distinct responses of BMD to environmental metal exposure. This study therefore aimed to elucidate the association between mixed heavy metal exposure and BMD and to investigate whether it is sex-specific.

Methods

Data from the 2017-2020 National Health and Nutrition Examination Survey were selected for this cross-sectional study. The study used three statistical methods, i.e., linear regression, Bayesian kernel machine regression (BKMR) modeling, and weighted quartiles (WQS) regression, to explore the association between the urinary concentrations of 11 metals (barium, cadmium, cobalt, cesium, manganese, molybdenum, lead, antimony, tin, thallium, and Tungsten), either individually or as a mixture, and total femoral BMD.

Results

A total of 1,031 participants were included in this study. Femoral BMD was found to be higher in men than women. A significant negative correlation between the urinary concentrations of the 10 metals and femoral BMD was found in the overall cohort. Further gender sub-stratified analyses showed that in men, urinary metal concentrations were negatively correlated with femoral BMD, with cobalt and barium playing a significant and non-linear role in this effect. In women, although urinary metal concentrations negatively modulated femoral BMD, none of the correlations was statistically significant. Antimony showed sex-specific differences in its effect.

Conclusion

The urinary concentrations of 10 mixed heavy metals were negatively correlated with femoral BMD in middle-aged and older participants, and this effect showed gender differences. These findings emphasize the differing role of mixed metal exposure in the process of BMD reduction between the sexes but require further validation by prospective studies.

The effect of nodal connectivity and strut density within stochastic titanium scaffolds on osteogenesis

Modern orthopaedic implants use lattice structures that act as 3D scaffolds to enhance bone growth into and around implants. Stochastic scaffolds are of particular interest as they mimic the architecture of trabecular bone and can combine isotropic properties and adjustable structure. The existing research mainly concentrates on controlling the mechanical and biological performance of periodic lattices by adjusting pore size and shape. Still, less is known on how we can control the performance of stochastic lattices through their design parameters: nodal connectivity, strut density and strut thickness. To elucidate this, four lattice structures were evaluated with varied strut densities and connectivity, hence different local geometry and mechanical properties: low apparent modulus, high apparent modulus, and two with near-identical modulus. Pre-osteoblast murine cells were seeded on scaffolds and cultured in vitro for 28 days. Cell adhesion, proliferation and differentiation were evaluated. Additionally, the expression levels of key osteogenic biomarkers were used to assess the effect of each design parameter on the quality of newly formed tissue. The main finding was that increasing connectivity increased the rate of osteoblast maturation, tissue formation and mineralisation. In detail, doubling the connectivity, over fixed strut density, increased collagen type-I by 140%, increased osteopontin by 130% and osteocalcin by 110%. This was attributed to the increased number of acute angles formed by the numerous connected struts, which facilitated the organization of cells and accelerated the cell cycle. Overall, increasing connectivity and adjusting strut density is a novel technique to design stochastic structures which combine a broad range of biomimetic properties and rapid ossification.

Regulation of localized corrosion of 316L stainless steel on osteogenic differentiation of bone morrow derived mesenchymal stem cells

Localized corrosion has become a concerning issue in orthopedic implants as it is associated with peri-implant adverse tissue reactions and implant failure. Here, the pitting corrosion of 316 L stainless steels (316 L SSs) was initiated by electrochemical polarization to simulate the in vivo localized corrosion of orthopedic implants. The effect of localized corrosion on osteogenic differentiation of bone marrow derived mesenchymal stem cells (BMSCs) was systematically studied. The results suggest that pitting corrosion of 316 L SS reduced the viability, adhesion, proliferation, and osteogenic differentiation abilities of BMSCs, especially for the cells around the corrosion pits. The relatively high concentrations of metallic ions such as Cr3+ and Ni2+ released by pitting corrosion could cause cytotoxicity to the BMSCs. The inhomogeneous electrochemical environment resulted from localized corrosion could promote reactive oxygen species (ROS) generation around the corrosion pits and cause oxidative stress of BMSCs. In addition, localized corrosion could also electrochemically interact with the cells and lead to cell membrane depolarization. The depolarized cell membranes and relatively high levels of ROS mediated the degradation of the osteogenic capacity of BMSCs. This work provides new insights into corrosion-mediated cell function degeneration as well as the material-cell interactions.

Metal-Driven Autoantifriction Function of Artificial Hip Joint

The service life of an artificial hip joint is limited to 10-15 years, which is not ideal for young patients. To extend the lifespan of these prostheses, the coefficient of friction and wear resistance of metallic femoral heads must be improved. In this study, a Cu-doped titanium nitride (TiNX -Cu) film with "autoantifriction" properties is deposited on a CoCrMo alloy via magnetron sputtering. When delivered in a protein-containing lubricating medium, the Cu in TiNX -Cu quickly and consistently binds to the protein molecules in the microenvironment, resulting in the formation of a stable protein layer. The proteins adsorbed on the TiNX -Cu surface decompose into hydrocarbon fragments owing to the shear stress between the Al2 O3 /TiNX -Cu tribopair. The synergistic effect of the catalysis of Cu and shear stress between the Al2 O3 /TiNX -Cu tribopair transforms these fragments into graphite-like carbon tribofilms with an antifriction property. These tribofilms can simultaneously reduce the friction coefficient of the Al2 O3 /TiNX -Cu tribopair and enhance the wear resistance of the TiNX -Cu film. Based on these findings, it is believed that the autoantifriction film can drive the generation of antifriction tribofilms for lubricating and increasing the wear resistance of prosthetic devices, thereby prolonging their lifespan.

Fit and forget: The future of dental implant therapy via nanotechnology

Unlike orthopedic implants, dental implants require the orchestration of both osseointegration at the bone-implant interface and soft-tissue integration at the transmucosal region in a complex oral micro-environment with ubiquitous pathogenic bacteria. This represents a very challenging environment for early acceptance and long-term survival of dental implants, especially in compromised patient conditions, including aged, smoking and diabetic patients. Enabling advanced local therapy from the surface of titanium-based dental implants via novel nano-engineering strategies is emerging. This includes anodized nano-engineered implants eluting growth factors, antibiotics, therapeutic nanoparticles and biopolymers to achieve maximum localized therapeutic action. An important criterion is balancing bioactivity enhancement and therapy (like bactericidal efficacy) without causing cytotoxicity. Critical research gaps still need to be addressed to enable the clinical translation of these therapeutic dental implants. This review informs the latest developments, challenges and future directions in this domain to enable the successful fabrication of clinically-translatable therapeutic dental implants that would allow for long-term success, even in compromised patient conditions.

Bone and Soft Tissue Reaction to Co(II)/Cr(III) Ions Stimulation in a Murine Calvaria Model: A Pioneering in vivo Study

Metal ions released during wear and corrosion of the artificial knee/hip joints are considered to contribute to aseptic implant failure. However, there are few convincing in vivo studies that demonstrate the effects of metal ions on bone and soft tissue. This study examined the in vivo effects of Co(II)/Cr(III) ions on mouse calvaria and the supra-calvaria soft tissue in an original mouse model. With the implantation of a helmet-like structure, we set up a subcutaneous cavity on the calvaria in which Co(II) Chloride or Cr(III) Chloride solutions were administered respectively. A layer of interface membrane formed on the calvaria along with the implantation of the helmet. The administered Cr(III) ions accumulated in the interface membranes while Co(II) disseminated into the circulation. Accumulated Cr(III) and related products induced local massive macrophage infiltration and skewed the bone metabolic balance. At last, we revealed that lymphocyte aggregates, which are the pathologic hallmark of human periprosthetic tissue, could be caused by either Co(II) or Cr(III) stimulation. These in vivo results may shed light on the effects and pathogenic mechanism of the Co(II)/Cr(III) ions released from the joint prosthesis. STATEMENT OF SIGNIFICANCE: Macrophage infiltration and lymphocyte aggregates are hallmarks of human joint periprosthetic tissue. We chronically administered Co(II)/Cr(III) ions on mouse calvaria and reproduced these two histopathologic hallmarks on mouse tissue based on an implanted helmet-like structure. Our results reveal that Cr(III) ions are locally accumulated and are effective in inducing macrophage infiltration and they can be phagocytosed and stored. However, the lymphocytes aggregates could be induced by both Co(II), Cr(III) and other unspecific inflammatory stimuli.

Biocompatibility of fiber-reinforced composite (FRC) and woven-coated FRC: an in vivo study

OBJECTIVES

To investigate biocompatibility and bone contact area of FRC and woven-coated FRC (FRC-C) in rats.

MATERIALS AND METHODS

Sixty rats were allocated to three groups: FRC (n=20), FRC-C (n=20), and control group (n=20). Subgroups were determined as 4th (n=10) and 12th weeks (n=10). The specimens were placed in the femur of rats. In the control group, the bone defects were left empty and sutured. Four and 12 weeks after implantation, the rats were sacrificed. Histopathological examinations were performed in a semi-quantitative manner. Twenty rats (n=20) were used for scanning electron microscopy (SEM) examination. Bone contact surfaces were calculated in SEM analysis. A chi-square test was performed to analyze the data.

RESULTS

No statistical difference was detected between the 4th and 12th weeks in the quality of bone union. Quality of bone union was lower in FRC compared to the control group in the 4th week (p=0.012) and the 12th week (p=0.017). The periosteal reaction at the 12th week was lower in FRC than in the control group (p=0.021). Bone contact of FRC and FRC-C was 85.5% and 86.3%, respectively.

CONCLUSIONS

FRC and FRC-C were biocompatible and showed no inflammation. The woven coating did not increase the quality of bone union and bone contact area, while not reducing biocompatibility.

CLINICAL RELEVANCE

The biocompatibility and good bone response of the woven glass fiber net were demonstrated to have the potential as a scaffold for the augmentation of alveolar bone deficiencies and the reconstruction of maxillofacial defects.

NLRP3 inflammasome activation in response to metals

Implant surgery is followed by a series of inflammatory reactions that directly affect its postoperative results. The inflammasome plays a vital role in the inflammatory response by inducing pyroptosis and producing interleukin-1β, which plays a critical role in inflammation and tissue damage. Therefore, it is essential to study the activation of the inflammasome in the bone healing process after implant surgery. As metals are the primary implant materials, metal-induced local inflammatory reactions have received significant attention, and there has been more and more research on the activation of the NLRP3 (NOD-like receptor protein-3) inflammasome caused by these metals. In this review, we consolidate the basic knowledge on the NLRP3 inflammasome structures, the present knowledge on the mechanisms of NLRP3 inflammasome activation, and the studies of metal-induced NLRP3 inflammasome activation.

A Review of 3D Polymeric Scaffolds for Bone Tissue Engineering: Principles, Fabrication Techniques, Immunomodulatory Roles, and Challenges

Over the last few years, biopolymers have attracted great interest in tissue engineering and regenerative medicine due to the great diversity of their chemical, mechanical, and physical properties for the fabrication of 3D scaffolds. This review is devoted to recent advances in synthetic and natural polymeric 3D scaffolds for bone tissue engineering (BTE) and regenerative therapies. The review comprehensively discusses the implications of biological macromolecules, structure, and composition of polymeric scaffolds used in BTE. Various approaches to fabricating 3D BTE scaffolds are discussed, including solvent casting and particle leaching, freeze-drying, thermally induced phase separation, gas foaming, electrospinning, and sol-gel techniques. Rapid prototyping technologies such as stereolithography, fused deposition modeling, selective laser sintering, and 3D bioprinting are also covered. The immunomodulatory roles of polymeric scaffolds utilized for BTE applications are discussed. In addition, the features and challenges of 3D polymer scaffolds fabricated using advanced additive manufacturing technologies (rapid prototyping) are addressed and compared to conventional subtractive manufacturing techniques. Finally, the challenges of applying scaffold-based BTE treatments in practice are discussed in-depth.

Magnesium incorporation in fibrinogen scaffolds promotes macrophage polarization towards M2 phenotype

The host inflammatory response to biomaterials conditions their capacity to promote tissue repair, and macrophage polarization shift from M1 to M2 is determinant in this process. Previous work showed that extracts of a combination between fibrinogen and metallic magnesium materials acted synergistically to reduce macrophage inflammatory phenotype. The hypothesis underlying the current work was that the ability of magnesium-modified fibrinogen scaffolds to modulate macrophage phenotype depends on the concentration of magnesium. Thus, Fibrinogen (Fg) scaffolds incorporating precise concentrations of magnesium sulfate (Mg: 0, 10, 25, 50 mM) were developed and characterized. Mg incorporation in Fg scaffolds increased surface charge, while porosity decreased with increasing Mg concentrations, but only Fg scaffolds with 10 mM of Mg (FgMg10) had significantly improved mechanical properties. Human macrophages cultured on FgMg10 scaffolds, showed increased M2 and decreased M1 polarization, when compared to those cultured on scaffolds with 0, 25 and 50 mM of Mg. Macrophage polarization results were independent of the anion used (chloride or sulfate). Macrophage modulation by FgMg10 scaffolds involved reduced NF-κB p65 nuclear translocation, and impacted production of pro-inflammatory mediators (e.g. IFNγ, IL-12, TNF-⍺, IP-10). Importantly, FgMg10 scaffolds implanted in vivo increased the expression of M2 marker CD163, in macrophages from inflammatory exudates, compared to Sham and Fg-implanted animals, increasing the M2:M1 ratio. A cytokine/chemokine array showed that, while both Fg and FgMg10 scaffolds decreased inflammatory mediators, only FgMg10 decreased IL-1β, IP-10, MIP-2, MDC and MIP-3⍺, compared to Sham-operated animals. This study demonstrated that incorporation of 10mM of Mg modulated inflammation, promoting M2 macrophage polarization in vitro and in vivo. STATEMENT OF SIGNIFICANCE: Developing biomaterials that can modulate inflammation and promote macrophage phenotype switch from M1 to M2 is crucial to promote a regenerative microenvironment. Our previous work showed that extracts of a combination between fibrinogen (Fg) and metallic magnesium (Mg) materials synergistically reduced macrophage pro-inflammatory phenotype. Herein, we tested the hypothesis that macrophage modulation was dependent on Mg concentration. A new family of Fg porous scaffolds incorporating different amounts of Mg (0, 10, 25 and 50 mM) was produced and characterized. We observed that only the combination of Fg scaffolds with 10 mM of Mg (FgMg10) significantly changed the scaffolds mechanical properties and directed macrophages towards a M2 phenotype, reducing the production of inflammatory mediators, both in vitro and in vivo.

Biomimetic Strategy to Enhance Epithelial Cell Viability and Spreading on PEEK Implants

Polyetheretherketone (PEEK) is a biocompatible material widely used in spinal and craniofacial implants, with potential use in percutaneous implants. However, its inertness prevents it from forming a tight seal with the surrounding soft tissue, which can lead to infections and implant failure. Conversely, the surface chemistry of percutaneous organs (i.e., teeth) helps establish a strong interaction with the epithelial cells of the contacting soft tissues, and hence a tight seal, preventing infection. The seal is created by adsorption of basement membrane (BM) proteins, secreted by epithelial cells, onto the percutaneous organ surfaces. Here, we aim to create a tight seal between PEEK and epithelial tissues by mimicking the surface chemistry of teeth. Our hypothesis is that collagen I, the most abundant tooth protein, enables integration between the epithelial tissue and teeth by promoting adsorption of BM proteins. To test this, we immobilized collagen I via EDC/NHS coupling on a carboxylated PEEK surface modified using diazonium chemistry. We used titanium alloy (Ti-6Al-4V) for comparison, as titanium is the most widely used percutaneous biomaterial. Both collagen-modified PEEK and titanium showed a larger adsorption of key BM proteins (laminin, nidogen, and fibronectin) compared to controls. Keratinocyte epithelial cell viability on collagen-modified PEEK was twice that of control PEEK and ∼1.5 times that of control titanium after 3 days of cell seeding. Both keratinocytes and fibroblasts spread more on collagen-modified PEEK and titanium compared to controls. This work introduces a versatile and biomimetic surface modification technique that may enhance PEEK-epithelial tissue sealing with the potential of extending PEEK applications to percutaneous implants, making it competitive with titanium.

Metal Ion Doping of Alginate-Based Surface Coatings Induces Adipogenesis of Stem Cells

Metal ions are important effectors of protein and cell functions. Here, polyelectrolyte multilayers (PEMs) made of chitosan (Chi) and alginate (Alg) were doped with different metal ions (Ca²⁺, Co²⁺, Cu²⁺, and Fe³⁺), which can form bonds with their functional groups. Ca²⁺ and Fe³⁺ ions can be deposited in PEM at higher quantities resulting in more positive ζ potentials and also higher water contact angles in the case of Fe³⁺. An interesting finding was that the exposure of PEM to metal ions decreases the elastic modulus of PEM. Fourier transformed infrared (FTIR) spectroscopy of multilayers provides evidence of interaction of metal ions with the carboxylic groups of Alg but not for hydroxyl and amino groups. The observed changes in wetting and surface potential are partly related to the increased adhesion and proliferation of multipotent C3H10T1/2 fibroblasts in contrast to plain nonadhesive [Chi/Alg] multilayers. Specifically, PEMs doped with Cu²⁺ and Fe³⁺ ions greatly promote cell attachment and adipogenic differentiation, which indicates that changes in not only surface properties but also the bioactivity of metal ions play an important role. In conclusion, metal ion-doped multilayer coatings made of alginate and chitosan can promote the differentiation of multipotent cells on implants without the use of other morphogens like growth factors.

Reversible, non‐plaque‐induced marginal bone loss around an osseointegrated implant: A case report

This case report documents a non‐plaque‐induced marginal bone loss around an osseointegrated implant. The loss of osseointegration, most likely caused by overload and/or suboptimal distribution of occlusal loading, may be reversed when the loading is reduced by optimally transmitting stress forces to the implant‐to‐bone interface and surrounding bone.

Limited crestal bone width and a history of ridge augmentation may make peri‐implant supporting bone vulnerable to occlusal overload. In such cases, the prosthetic restoration should be planned with particular focus on reducing and optimizing the occlusal load.

Bone Using Stem Cells for Maxillofacial Bone Disorders: A Systematic Review and Meta-analysis

Due to economic, cultural, environmental, and social factors, the prevalence of maxillofacial bone disorders varies in different parts of the world. The present meta-analysis was conducted to assess the efficacy and safety of different type of stem cells-based scaffolds and their construction methods in maxillofacial bone disorders. We searched major indexing databases, including PubMed/Medline, ISI Web of Science, Scopus, Embase, and Cochrane Central without any language, study region, or type restrictions. A systematic search of articles published up to July 2021 was done. Of the 428 studies found through initial searches, 36 met the inclusion criteria. After applying the exclusion criteria, the main properties of 32 articles on 643 animals and 4 experimental studies on 52 patients (age range from 43 to 74 years) included in this meta-analysis. Our pooled analysis showed that stem cells-based scaffolds significantly improved the bone regeneration and formation in maxillofacial bone disorders (Prevalence: 0.54; 95% CI: 0.43, 0.64, P < 00001, I2 = 90 2). According to the results of these studies, in most studies, bone marrow-derived mesenchymal stem cells (BMSCs) have been used to regenerate bone, and these cells are still the gold standard in bone tissue engineering, a growth factor that is one of the three sides of the tissue engineering triangle. Bone morphogenetic proteins (BMP) especially BMP2 and platelet-rich plasma (PRP) are the most widely used growth factor and scaffold respectively. Platelet-rich plasma (PRP) is used as a scaffold and since it contains proteins, it also used as a growth factor and can be a stimulant of ossification. It seems that the future perspective of bone tissue engineering is to use the prototyping rapid method to build a composite and patient-specific scaffold from CT and MRI images, along with genetically modified stem cells.

Integration of collagen fibers in connective tissue with dental implant in the transmucosal region

Dental implants have been widely accepted as an ideal therapy to replace the missing teeth for its good performance in aspects of mechanical properties and aesthetic outcomes. Its restorative success is contributed by not only the successful osseointegration of the implant but also the tight soft tissue integration, especially the collagen fibers, in the transmucosal region. Soft tissue attaching to the dental implant/abutment is overall similar, but in some aspects distinct with that seen around natural teeth and soft tissue integration can be enhanced via several surface modification methods. This review is going to focus on the current knowledge of the transmucosal zone around the dental implants (compared with natural teeth), and latest strategies in use to fine-tune the collagen fibers assembly in the connective tissue, in an attempt to enhance soft tissue integration.

A Facile and Universal Method for Preparing Polyethylene Glycol-Metal Hybrid Nanoparticles and Their Application in Tumor Theranostics

Metal ions are of widespread interest owing to their brilliant biomedical functions. However, a simple and universal nanoplatform designed for assembling a range of functional metal ions has not been explored. In this study, a concept of polyethylene glycol (PEG)-mediated transport of metal ions is proposed. 31 types of PEG-metal hybrid nanoparticles (P-MNPs) are successfully synthesized through anionic ring-opening polymerization (ROP), "thiol-ene" click reaction, and subsequent incorporation with multiple metal ions. Compared with other methods, the facile method proposed in this study can provide a feasible approach to design MNPs (mostly <200 nm) containing different metal ions and thus to explore their potential for cancer theranostics. As a proof-of-concept demonstration, four types P-MNPs, i.e., PEG-metal hybrid copper nanoparticles (PEG-Cu NPs), ruthenium nanoparticles (PEG-Ru NPs), and manganese nanoparticles (PEG-Mn NPs) or gadolinium nanoparticles (PEG-Gd NPs), are proven to be tailored for chemodynamic therapy, photothermal therapy, and magnetic resonance imaging of tumors, respectively. Overall, this study provides several metal ions-based nanomaterials with versatile functions for broad applications in cancer theranostics. Furthermore, it offers a promising tool that can be utilized for processing other metal-based nanoparticles and exploring their potential in the biomedical field.

Macrophage-derived oncostatin M/bone morphogenetic protein 6 in response to Mg-based materials influences pro-osteogenic activity of human umbilical cord perivascular cells

Macrophages are the central immune cell involved in the foreign body reaction to the implants. Furthermore, the magnesium-based materials could modulate macrophage functions, and subsequently influence bone formation via not clearly understood mechanisms. To analysis the roles of materials (magnesium and its gadolinium-based alloy; Mg and Mg-10Gd) on secretion of macrophages and their effects on pro-osteogenic activity, human mesenchymal stem cells (MSC) and macrophages were cocultured directly on the materials surface. Here, oncostatin M (OSM) - glycoprotein 130 (gp130) signaling complex as well as BMP6/SMAD were found to be involved in the Mg and Mg-10Gd multifactorial modulating osteogenic differentiation. Furthermore, materials upregulated the gene expression of bone morphogenetic protein 6 (BMP6) in macrophages, as well as its protein receptors and mothers against decapentaplegic homolog (SMAD) 1/4/5 in cocultured MSC. Besides, both materials could reduce the secretion of tumour necrosis factor alpha (TNFα) and interleukin 1 beta (IL1β) in macrophages and cocultures. These results collectively imply that Mg and Mg-10Gd could create a beneficial microenvironment for osteogenic differentiation and further support Mg-based biomaterial immunomodulatory properties by modulating the interactions of macrophages and MSC for bone regeneration. STATEMENT OF SIGNIFICANCE: Mg-activated macrophages could regulate the pro-osteogenic activity via OSM/gp130 and Smad-related signalling. The neutralisation assay was utilised to confirm the hypothesis of inductive osteoblastic differentiation of human MSC via OSM/gp130 signalling. Current study are essential to evidence that the coordinated communication between macrophages and MSC (OSM/gp130/BMP6/TNFα/IL1β), which could be utilised for improving magnesium-based bone biomaterials and therapeutic applications.

Effect of metal ions on the physical properties of multilayers from hyaluronan and chitosan, and the adhesion, growth and adipogenic differentiation of multipotent mouse fibroblasts

Polyelectrolyte multilayers (PEMs) consisting of the polysaccharides hyaluronic acid (HA) as the polyanion and chitosan (Chi) as the polycation were prepared with layer-by-layer technique (LbL). The [Chi/HA]₅ multilayers were exposed to solutions of metal ions (Ca²⁺, Co²⁺, Cu²⁺ and Fe³⁺). Binding of metal ions to [Chi/HA]₅ multilayers by the formation of complexes with functional groups of polysaccharides modulates their physical properties and the bioactivity of PEMs with regard to the adhesion and function of multipotent murine C3H10T1/2 embryonic fibroblasts. Characterization of multilayer formation and surface properties using different analytical methods demonstrates changes in the wetting, surface potential and mechanical properties of multilayers depending on the concentration and type of metal ion. Most interestingly, it is observed that Fe³⁺ metal ions greatly promote adhesion and spreading of C3H10T1/2 cells on the low adhesive [Chi/HA]₅ PEM system. The application of intermediate concentrations of Cu²⁺, Ca²⁺ and Co²⁺ as well as low concentrations of Fe³⁺ to PEMs also results in increased cell spreading. Moreover, it can be shown that complex formation of PEMs with Cu²⁺ and Fe³⁺ ions leads to increased metabolic activity in cells after 24 h and induces cell differentiation towards adipocytes in the absence of any additional adipogenic media supplements. Overall, complex formation of [Chi/HA]₅ PEM with metal ions like Cu²⁺ and Fe³⁺ represents an interesting and cheap alternative to the use of growth factors for making cell-adhesive coatings and guiding stem cell differentiation on implants and scaffolds to regenerate connective-type of tissues.

Research to Clinics: Clinical Translation Considerations for Anodized Nano-Engineered Titanium Implants

Titania nanotubes (TNTs) fabricated on titanium orthopedic and dental implants have shown significant potential in "proof of concept" in vitro, ex vivo, and short-term in vivo studies. However, most studies do not focus on a clear direction for future research towards clinical translation, and there exists a knowledge gap in identifying key research challenges that must be addressed to progress to the clinical setting. This review focuses on such challenges with respect to anodized titanium implants modified with TNTs, including optimized fabrication on clinically utilized microrough surfaces, clinically relevant bioactivity assessments, and controlled/tailored local release of therapeutics. Further, long-term in vivo investigations in compromised animal models under loading conditions are needed. We also discuss and detail challenges and progress related to the mechanical stability of TNT-based implants, corrosion resistance/electrochemical stability, optimized cleaning/sterilization, packaging/aging, and nanotoxicity concerns. This extensive, clinical translation focused review of TNTs modified Ti implants aims to foster improved understanding of key research gaps and advances, informing future research in this domain.

Mesoporous Mn-doped hydroxyapatite nanorods obtained via pyridinium chloride enabled microwave-assisted synthesis by utilizing Donax variabilis seashells for implant applications

Manganese-doped mesoporous hydroxyapatite (MnHAp) nanorods, a bio-apatite were synthesized via pyridinium chloride mediated microwave approach using bio-waste Donax variabilis seashells to treat orthopedic infections. This is the first report on using pyridinium chloride mediated mesoporous MnHAp nanorods synthesis. Pure and Mn doped HAp samples were examined using Raman spectroscopy, X-ray powder diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) studies to confirm the prepared HAp nanorods. Furthermore, the fabrication of manganese-doped HAp was successful with the formation of a hexagonal crystal lattice without disturbing the HAp phase. It is because, at the time of synthesis, PO₄^3- ions form an electrostatic interaction with the Mn ions. Furthermore, Mn-doped HAp samples showed a reduction in their sizes of 15, 10-15, 5-10 nm width, and 80-100, 10-15, 20-30 nm length with varied pore diameters and surface area. The pure HAp, MnHAp-1, MnHAp-2, and MnHAp-3 nanorods disclose the surface area of 39.4, 18.0, 49.2, and 80.4 m² g^-1, with a pore volume of 0.0102, 0.0047, 0.0143, and 0.0447 cm³ g^-1, the corresponding pore diameter was estimated to be 6, 7, 6, and 4 nm, respectively. Moreover, antibacterial activity reveals effective bactericidal action against infections causing pathogens whereas cytotoxicity examination (MTT assay), and zebrafish results reveal their non-toxic behavior. Therefore, it is evident from the study, that rapid fabrication of mesoporous and diverse structured MnHAp nanorods could be convenient with pyridinium chloride enabled microwave-assisted method as a bactericidal biomaterial for implant applications.

Current Concepts on the Pathogenesis of Peri-implantitis: A Narrative Review

As implant treatment has been integrated in contemporary dental practice, complications with the forms of peri-implant mucositis and peri-implantitis have also increased in prevalence. Peri-implantitis is the more severe biological complication and is defined as an inflammatory disease affecting peri-implant tissues resulting in bone and eventually implant loss. In addition, the treatment of peri-implantitis has currently become a substantial global economic burden. In the current study, a search was conducted in several electronic databases using specific keywords relevant to the article's main topic. An increasing number of scientific reports have investigated the etiopathology of peri-implant diseases, focusing mainly on peri-implantitis. Microbial biofilm consists an important etiological factor of peri-implant pathology analogous to periodontal diseases. Although several data confirm that peri-implant infections are dominated by gram-negative bacteria, similar to periodontal infections, there is evidence that some cases may harbor a distinct microbiota, including opportunistic microorganisms and/or uncultivable species. Additionally, data support that several parameters, such as genetic predisposition of individual patients, occlusal overload, and local factors such as titanium particles and excess cement, may be implicated in peri-implantitis pathogenesis. Simultaneously, the release of titanium metal particles and their biological consequences or the presence of excess cement in the adjacent peri-implant tissues have also been suggested as factors that contribute to peri-implant pathology. A specific line of research also indicates the role of foreign body response to implant installation. This narrative review aims to discuss the current concepts of etiopathogenetic factors implicated in peri-implantitis.

Osteoimmunology drives dental implant osseointegration: A new paradigm for implant dentistry

There is a complex interaction between titanium dental implants, bone, and the immune system. Among them, specific immune cells, macrophages play a crucial role in the osseointegration dynamics. Infiltrating macrophages and resident macrophages (osteomacs) contribute to achieving an early pro-regenerative peri-implant environment. Also, multinucleated giant cells (MNGCs) in the bone-implant interface and their polarization ability, maintain a peri-implant immunological balance to preserve osseointegration integrity. However, dental implants can display cumulative levels of antigens (ions, nano and microparticles and bacterial antigens) at the implant–tissue interface activating an immune-inflammatory response. If the inflammation is not resolved or reactivated due to the stress signals and the immunogenicity of elements present, this could lead implants to aseptic loosening, infections, and subsequent bone loss. Therefore, to maintain osseointegration and prevent bone loss of implants, a better understanding of the osteoimmunology of the peri-implant environment would lead to the development of new therapeutic approaches. In this line, depicting osteoimmunological mechanisms, we discuss immunomodulatory strategies to improve and preserve a long-term functional integration between dental implants and the human body.

Scientific field of dental science: implant dentistry.

Porous bioactive glass micro- and nanospheres with controlled morphology: developments, properties and emerging biomedical applications

In recent years, porous bioactive glass micro/nanospheres (PBGSs) have emerged as attractive biomaterials in various biomedical applications where such engineered particles provide suitable functions, from tissue engineering to drug delivery. The design and synthesis of PBGSs with controllable particle size and pore structure are critical for such applications. PBGSs have been successfully synthesized using melt-quenching and sol-gel based methods. The morphology of PBGSs is controllable by tuning the processing parameters and precursor characteristics during the synthesis. In this comprehensive review on PBGSs, we first overview the synthesis approaches for PBGSs, including both melt-quenching and sol-gel based strategies. Sol-gel processing is the primary technology used to produce PBGSs, allowing for control over the chemical compositions and pore structure of particles. Particularly, the influence of pore-forming templates on the morphology of PBGSs is highlighted. Recent progress in the sol-gel synthesis of PBGSs with sophisticated pore structures (e.g., hollow mesoporous, dendritic fibrous mesoporous) is also covered. The challenges regarding the control of particle morphology, including the influence of metal ion precursors and pore expansion, are discussed in detail. We also highlight the recent achievements of PBGSs in a number of biomedical applications, including bone tissue regeneration, wound healing, therapeutic agent delivery, bioimaging, and cancer therapy. Finally, we conclude with our perspectives on the directions of future research based on identified challenges and potential new developments and applications of PBGSs.

Synergistic effects of immunoregulation and osteoinduction of ds-block elements on titanium surface

Ds-block elements have been gaining increasing attention in the field of biomaterials modification, owing to their excellent biological properties, such as antibiosis, osteogenesis, etc. However, their function mechanisms are not well understood and conflicting conclusions were drawn by previous studies on this issue, which are mainly resulted from the inconsistent experimental conditions. In this work, three most widely used ds-block elements, copper, zinc, and silver were introduced on titanium substrate by plasma immersion ion implantation method to investigate the rule of ds-block elements in the immune responses. Results showed that the implanted samples could decrease the inflammatory responses compared with Ti sample. The trend of anti-inflammatory effects of macrophages on samples was in correlation with cellular ROS levels, which was induced by the implanted biomaterials and positively correlated with the number of valence electrons of ds-block elements. The co-culture experiments of macrophages and bone marrow mesenchymal stem cells showed that these two kinds of cells could enhance the anti-inflammation and osteogenesis of samples by the paracrine manner of PGE2. In general, in their steady states on titanium substrate (Cu2+, Zn2+, Ag), the ds-block elements with more valence electrons exhibit better anti-inflammatory and osteogenic effects. Moreover, molecular biology experiments indicate that the PGE2-related signaling pathway may contribute to the desired immunoregulation and osteoinduction capability of ds-block elements. These findings suggest a correlation between the number of valence electrons of ds-block elements and the relevant biological responses, which provides new insight into the selection of implanted ions and surface design of biomaterials.

Fibrinogen and magnesium combination biomaterials modulate macrophage phenotype, NF-kB signaling and crosstalk with mesenchymal stem/stromal cells

Macrophage behavior upon biomaterial implantation conditions the inflammatory response and subsequent tissue repair. The hypothesis behind this work was that fibrinogen (Fg) and magnesium (Mg) biomaterials, used in combination (FgMg) could act synergistically to modulate macrophage activation, promoting a pro-regenerative phenotype. Materials were characterized by scanning electron microscopy, Fg and Mg degradation products were quantified by atomic absorption spectroscopy and ELISA. Whole blood immune cells and primary human monocyte-derived macrophages were exposed to the biomaterials extracts in unstimulated (M0) or pro-inflammatory LPS or LPS-IFNγ (M1) conditions. Macrophage phenotype was evaluated by flow cytometry, cytokines secreted by whole blood cells and macrophages were measured by ELISA, and signaling pathways were probed by Western blotting. The secretomes of macrophages preconditioned with biomaterials extracts were incubated with human mesenchymal stem/stromal cells (MSC) and their effect on osteogenic differentiation was evaluated via Alkaline Phosphatase (ALP) activity and alizarin red staining. Scaffolds of Fg, alone or in the FgMg combination, presented similar 3D porous architectures. Extracts from FgMg materials reduced LPS-induced TNF-α secretion by innate immune cells, and macrophage M1 polarization upon LPS-IFNγ stimulation, resulting in lower cell surface CD86 expression, lower NFκB p65 phosphorylation and reduced TNF-α secretion. Moreover, while biomaterial extracts per se did not enhance MSC osteogenic differentiation, macrophage secretome, particularly from cells exposed to FgMg extracts, increased MSC ALP activity and alizarin red staining, compared with extracts alone. These findings suggest that the combination of Fg and Mg synergistically influences macrophage pro-inflammatory activation and crosstalk with MSC. STATEMENT OF SIGNIFICANCE: Modulating macrophage phenotype by degradable and bioactive biomaterials is an increasingly explored strategy to promote tissue repair/regeneration. Fibrinogen (Fg) and magnesium (Mg)-based materials have been explored in this context. Previous work from our group showed that monocytes interact with fibrinogen adsorbed onto chitosan surfaces through TLR4 and that fibrinogen scaffolds promote in vivo bone regeneration. Also, magnesium ions have been reported to modulate macrophage pro-inflammatory M1 stimulation and to promote bone repair. Here we report, for the first time, the combination of Fg and Mg materials, hypothesizing that it could act synergistically on macrophages, directing them towards a pro-regenerative phenotype. As a first step towards proving/disproving our hypothesis we used extracts obtained from Fg, Mg and FgMg multilayer constructs. We observed that FgMg extracts led to a reduction in the polarization of macrophages towards a pro-inflammatory phenotype. Also, the secretome of macrophages exposed to extracts of the combination material promoted the expression of osteogenic markers by MSCs.

Cu(II) ion loading in silk fibroin scaffolds with silk I structure

Metal ions play important roles in the diverse biochemical reactions associated with many cell signalling pathways. The modification of biomaterials with metal ions may offer a promising approach to stimulate cellular activity for improving tissue regeneration. Here, copper ion loading as a potential therapeutic agent in silk fibroin (SF) scaffolds was investigated. Freezing-annealing was used to induce silk I crystallization for forming water-insoluble SF scaffolds. Cu(II) ions were entrapped into SF scaffolds with different ratios by forming silk I crystal networks when copper chloride dihydrate was less than 5.0 wt%, producing water-stable materials. Moreover, it was found that copper ion chelation further enhanced SF stability when a low amount copper chloride was loaded. Increasing copper chloride content weakened silk I crystallization and Cu(II) ion chelation, rendering SF scaffolds unstable in water. Above 5.0 wt% copper chloride dihydrate, silk I crystallization was prevented. Finally, silk I scaffold with 1.5 wt% copper chloride dihydrate showed the strongest water-stability and highest loading efficiency. The results provide valuable data for understanding the effect of metal ions in freezing-induced SF crystallization, and also offer options for preparing novel Cu(II)-functionalized SF scaffolds.

Zinc Silicate/Nano-Hydroxyapatite/Collagen Scaffolds Promote Angiogenesis and Bone Regeneration via the p38 MAPK Pathway in Activated Monocytes

Recent studies show that biomaterials are capable of regulating immune responses to induce a favorable osteogenic microenvironment and promote osteogenesis and angiogenesis. In this study, we investigated the effects of zinc silicate/nanohydroxyapatite/collagen (ZS/HA/Col) scaffolds on bone regeneration and angiogenesis and explored the related mechanism. We demonstrate that 10ZS/HA/Col scaffolds significantly enhanced bone regeneration and angiogenesis in vivo compared with HA/Col scaffolds. ZS/HA/Col scaffolds increased tartrate-resistant acid phosphatase (TRAP)-positive cells, nestin-positive bone marrow stromal cells (BMSCs) and CD31-positive neovessels, and expression of osteogenesis (Bmp-2 and Osterix) and angiogenesis-related (Vegf-α and Cd31) genes increased in nascent bone. ZS/HA/Col scaffolds with 10 wt % ZS activated the p38 signaling pathway in monocytes. The monocytes subsequently differentiated into TRAP⁺ cells and expressed higher levels of the cytokines SDF-1, TGF-β1, VEGF-α, and PDGF-BB, which recruited BMSCs and endothelial cells (ECs) to the defect areas. Blocking the p38 pathway in monocytes reduced TRAP⁺ differentiation and cytokine secretion and resulted in a decrease in BMSC and EC homing and angiogenesis. Overall, these findings demonstrate that 10ZS/HA/Col scaffolds modulate monocytes and, thereby, create a favorable osteogenic microenvironment that promotes BMSC migration and differentiation and vessel formation by activating the p38 signaling pathway.

Ultra-high-purity iron is a novel and very compatible biomaterial

Metals and alloys are used widely in bone prosthetic materials, stents and dental tissue reconstructions. The most common materials are stainless steels and cobalt-chromium-nickel and titanium alloys. These alloys can be easily deformed but are hard to break. However, their affinity for cells and tissues is very low. In addition, they can sometimes provoke unexpected metal allergies. Iron is an abundant trace element essential for humans. However, excess amounts in particular of Fe²⁺ ions are toxic. We previously succeeded in obtaining 99.9996% ultra-high-purity iron (ABIKO iron). The chemical properties of ABIKO iron are completely different from that of conventional pure iron. For example, the reaction rate in hydrochloric acid is very slow and there is barely any corrosion. Here, we found that, in the absence of any type of coating, mammalian cells could easily attach to, and normally proliferate and differentiate on, ABIKO iron. On the other hand, cell densities and proliferation rate of the surfaces of plates made from Co-Cr-Mo or Ti-6Al-4V were significantly reduced. In addition, several stress and iron response genes, HSP70, SOD1, ATM and IRP2 did not change in the cells on ABIKO iron, while these genes were induced with exogenous application of FeSO₄. Cells also secreted and fastened some organics on ABIKO iron. In vitro collagen binding assay showed that ABIKO iron binds higher amount of collagens. These findings highlight ABIKO iron as a novel biocompatible prosthetic material.

Development of nano-porous hydroxyapatite coated e-glass for potential bone-tissue engineering application: An in vitro approach

To reconstruct the defects caused by craniectomies autologous, bone grafting was usually used, but they failed most commonly due to bone resorption, infections and donor-site morbidity. In the present investigation, an effort has been made for the first time to check the feasibility and advantage of using hydroxyapatite (HAp) coated e-glass as component of bone implants. Sol-gel synthesized coatings were found to be purely hydroxyapatite from XRD with graded and interconnected pores all over the surface observable in TEM. The interconnected porous nature of ceramics are found to increase bioactivity by acting to up-regulate the process of osseointegration through enhanced nutrient transfer and induction of angiogenesis. From TEM studies and nano indentation studies, we have shown that pores were considered to be appropriate for nutrient supply without compromising the strength of sample while in contact with physiological fluid. After SBF immersion test, porous surface was found to be useful for nucleation of apatite crystals, hence increasing the feasibility and bioactivity of sample. However, our quasi-dynamic study showed less crystallization but had significant formation of apatite layer. Overall, the in vitro analyses show that HAp coated e-glass leads to significant improvement of implant properties in terms of biocompatibility, cell viability and proliferation, osteoinductivity and osteoconductivity. HAp coating of e-glass can potentially be utilized in fabricating durable and strong bioactive non-metallic implants and tissue engineering scaffolds.

Modulating the cobalt dose range to manipulate multisystem cooperation in bone environment: a strategy to resolve the controversies about cobalt use for orthopedic applications

The paradoxical effect of cobalt on biological processes has aroused controversy regarding the application of cobalt-based biomaterials in bone regeneration. Tuning the dose range of cobalt ions may be a valid strategy to resolve the controversies about cobalt use for orthopedic applications. Recent progress in bone biology has highlighted the effects of multisystem cooperation (especially of osteoimmune, skeletal, and vascular systems) on bone dynamics. Before the application of this dose-tuning strategy, a deeper understanding of its dose-dependent effect on the cooperation of osteoimmune, skeletal, and vascular systems is needed. However, due to the difficulties with investigating the interaction of multiple systems in vitro, the multimodal effects of cobalt on bone homeostasis were investigated here, in an in vivo scenario. Methods: In vitro CCK8 assay and cytoskeletal staining were preformed to detecte the cell cytotoxic reaction in response to 0.1-100 ppm cobalt stimulation. Blood clot containing 0.1 to 5 ppm of cobalt were implanted in the rat calvarium defect. The gene profile of osteoimmune, skeletal, and vascular system as well as the systemic toxicity were evaluated via RT-qPCR, histological analysis and inductively coupled plasma mass spectrometry. The bone regeneration, osteoclastogenesis and vascularization were assessed by micro-ct and histological analysis. Results: Cobalt concentration below 5 ppm did not cause cell toxicity in vitro. No systemic toxicity was observed in vivo at 0.1-5 ppm cobalt concentration. It was found that the early cytokine profiles of the multiple interacting systems were different in response to different cobalt doses. Most of the anti-inflammatory, osteogenic, and proangiogenic factors were upregulated in the 1 ppm cobalt group at the early stage. In the late stage, the 1ppm group was most superior in bone regenerative effect while the 5 ppm group displayed the strongest osteoclastogenesis activity. Conclusions: The 1 ppm concentration of cobalt yielded the most favorable cooperation of the osteoimmune, skeletal, and vascular systems and subsequently optimal bone regeneration outcomes. Tuning the cobalt dose range to manipulate the cooperation of osteoimmune, skeletal, and vascular systems could be a promising and valuable strategy to prevent paradoxical effects of cobalt while preserving its beneficial effects.

Modulation of foreign body reaction and macrophage phenotypes concerning microenvironment

The foreign body reaction (FBR) is described as a local chronic inflammation after implantation of biomaterials in which macrophages involved intimately. At the stage of acute inflammation, mast cells release histamine, Interleukin-4 (IL-4) and Interleukin-13 (IL-13), enhancing recruitment, and fusion of macrophages in the following phase. As for chronic intensive inflammation, degradation of biomaterials would be promoted by macrophage-derived foreign body giant cells releasing degradative enzymes, acid and reactive oxygen intermediates. Nevertheless, it could be seen as a breakthrough point for regulating FBR, considering the dominant role of the macrophage in the immune response as exemplified by the decrease of IL-4 and IL-13, stabilizing an appropriate balance between two macrophage phenotypes, selectively suppressing some function of macrophages, and so on. Moreover, the relationship between macrophages polarization and the development of a fibrous capsule, which increase the possibility of implantation failure, will be illustrated later. This review aims at providing readers a comprehensive understanding of FBR and its correlative treatment strategy.

Effect of cobalt ions on the interaction between macrophages and titanium

Inflammation and bone reduction around dental implants are described as peri‐implantitis and can be caused by an inflammatory response against bacterial products and toxins. Titanium (Ti) forms aggregates with serum proteins, which activate and cause release of the cytokine interleukin (IL‐1β) from human macrophages. It was hypothesized that cobalt (Co) ions can interact in the formation of pro‐inflammatory aggregates, formed by titanium. To test this hypothesis, we differentiated THP‐1 cells into macrophages and exposed them to Ti ions alone or in combination with Co ions to investigate if IL‐1β release and cytotoxicity were affected. We also investigated aggregate formation, cell uptake and human biopsies with inductively coupled plasma atomic emission spectroscopy and electron microscopy. Co at a concentration of 100 µM neutralized the IL‐1β release from human macrophages and affected the aggregate formation. The aggregates formed by Ti could be detected in the cytosol of macrophages. In the presence of Co, the Ti‐induced aggregates were located in the cytosol of the cultured macrophages, but outside the lysosomal structures. It is concluded that Co can neutralize the Ti‐induced activation and release of active IL‐1β from human macrophages in vitro. Also, serum proteins are needed for the formation of metal‐protein aggregates in cell medium. Furthermore, the structures of the aggregates as well as the localisation after cellular uptake differ if Co is present in a Ti solution. Phagocytized aggregates with a similar appearance seen in vitro with Ti present, were also visible in a sample from human peri‐implant tissue. © 2018 The Authors Journal of Biomedical Materials Research Part A Published by Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A:2518–2530, 2018.

Fretting corrosion behaviour of Ti-6Al-4V reinforced with zirconia in foetal bovine serum

Fretting corrosion is a critical challenge in the design of hip prosthesis used in total hip arthroplasty (THA) surgeries. Currently, the design of hip implants includes a tapered junction which introduces additional interfaces that connect different parts of the hip implant such as the femoral neck and head or stem and neck interface. Micro motions that occur under the influence of load, together with chemical changes in the host environment, make these interfaces susceptible to tribocorrosion processes, particularly fretting corrosion. Commonly used metallic biomaterials are based on stainless steels, cobalt chrome-based alloys as well as titanium and titanium alloys. Each of these materials possess some degree of limitations, particularly where tribocorrosion events are concerned. Titanium alloy Ti-6Al-4V is widely used in biomedical applications for non-bearing components of total joint arthroplasty (TJA) surgeries. Its poor wear resistance continues to remain a challenge in load-bearing joints where parts articulate against one another as in the case of modular junctions. Some of the attempts made to improve the wear properties of Ti-6Al-4V is through the incorporation of second phase particles like ceramics in its matrix to produce metal matrix composites of Ti-6Al-4V. The aim of this work is to investigate the effect of zirconia reinforcement on spark plasma sintered Ti-6Al-4V composites (zirconium oxide particles incorporated into Ti-6Al-4V matrix) on the fretting corrosion properties of Ti-6Al-4V. Fretting corrosion tests were carried out on as-sintered Ti-6Al-4V and Ti-6Al-4V with 5 and 10 wt.% ZrO₂. The tests were carried out in foetal bovine serum under applied normal loads of 85 and 115 N using the cylinder-on-flat contact configuration. The evolution of OCP, dissipated energy and friction coefficient were recorded throughout the test. Microstructural analysis of the samples before fretting corrosion tests showed the presence of globular agglomerates throughout the Ti-6Al-4V matrix due to zirconia additions; the volume of the agglomerates was higher in the composites having 10 wt.% ZrO₂. Ti-6Al-4V composites having zirconia additions produced a nobler OCP during fretting in foetal bovine serum, compared to pure Ti-6Al-4V. Furthermore, the fretting corrosion results showed a significant improvement in the tribocorrosion resistance of Ti-6Al-4V with 10 wt.% ZrO₂ at all loads. This composition also produced the least amount of degradation. and metal ion release. Mechanical data showed that increasing the applied normal load promoted a transition from gross slip to partial slip conditions for all compositions. Partial slip was found to be prevalent at a higher normal load (drastic decrease of the dissipated energy and consequently the friction coefficient). This mechanical condition prevents a large amount of degradation.

Positive Material Identification testing of dental implant to correlate their compositions with allergic conditions

BACKGROUND

Rapid increase of products containing titanium leads to the increases in percutaneous and permucosal exposure of populations to the titanium.

PURPOSE

Evaluate the various material compositions in five commercially available dental implant systems and correlate the obtained material contents with allergic conditions seen with implants.

MATERIAL AND METHODS

A total of 25 implant, with 5 samples each in 5 groups of commercially available dental implants (MKIII, Myriad, Nobel Replace, MIS and Alpha Dent) were used in the study. Positive Material Identification (PMI) testing was done to analyse the amount of different metals (percentage by mass) present in the dental implants.

RESULTS

Highest titanium content, 99.47% by mass was found in sample 2 (Myriad) and least, 89.04% by mass in sample 5(Alpha dent). Nickel was found only in sample 5 (Alpha dent) in 0.079% by mass and zinc in sample 4 (MIS) in0.084% by mass, chromium was found in sample 1 (MK III) in 0.263% by mass and in sample 2 in0.273% by mass.

CONCLUSIONS

Implant composition should be made mandatory to be disclosed on the implant packet and before implant placement patch test for the allergen present in the particular implant can be done for the patient's health benefit and long term clinical success of dental implants.

Prevalence of Peri-Implantitis in Implants with Turned and Rough Surfaces: a Systematic Review

Objectives

Moderately-rough implant surface may improve implant therapy in terms of bone integration, but the increased surface roughness might affect the initiation and development of peri-implantitis. The aim of the present review was to compare the prevalence of peri-implantitis in implants with rough and turned (machined) implant surfaces.

Material and Methods

An electronic literature search was conducted of the MEDLINE and EMBASE databases for articles published between 1 January 1990 and 1 March 2018. Clinical human studies in the English language that had reported on prevalence of peri-implantitis in tuned and rough surface implants were searched. The initial search resulted in 690 articles.

Results

Eight articles with 2992 implants were included in the systematic review. The incidence of peri-implantitis for two implant surfaces varied between studies. A meta-analysis was not feasible due to the heterogeneity among studies. Implant with rough surfaces were more favourable for plaque accumulation during short-term follow-up. On a long-term, turned implants surfaces were associated with more plaque and higher peri-implant bone loss. Peri-implant clinical parameters and survival rate for two implant surfaces was similar.

Conclusions

Within the limitations of the present study, rough implant surface does not seem to increase the incidence of peri-implantitis in comparison to turned implants surface.

Multifunctional sulfonated polyetheretherketone coating with beta-defensin-14 for yielding durable and broad-spectrum antibacterial activity and osseointegration

To address periprosthetic joint infection (PJI), a formidable complication after joint arthroplasty, an implant with excellent osseointegration and effective antibacterial activity has being extensively pursued and developed. In this work, the mouse beta-defensin-14 (MBD-14) was immobilized on the polyetheretherketone (PEEK) surface with three-dimensional (3D) porous structure to improve its antibacterial activity and osseointegration. An in vitro antibacterial evaluation showed that the porous PEEK loaded with MBD-14 wages a durable and effective fight against both Staphylococcus aureus (gram-positive) and Pseudomonas aeruginosa (gram-negative). In addition to the superior antibacterial activity, we found that the enhanced proliferation and osteogenic differentiation of bone mesenchymal stem cells were verified through various in vitro analyses. To evaluate the in vivo bactericidal effect and osseointegration of the samples, the rat femoral models with infection and non-infection were established. The enhanced osseointegration of the MBD-14-loaded samples was found in both two in vivo models. And no bacteria survived on the surfaces of samples with a relatively high MBD-14 concentration. Above results indicate that the 3D porous PEEK coating loaded with MBD-14 simultaneously yields excellent osseointegration while exerting durable and broad-spectrum antibacterial activity. And it paves the way for PEEK to be applied clinically to address PJI. STATEMENT OF SIGNIFICANCE: (1). By using the physio-chemical technique including sulfonation and lyophilization etc., a three-dimensional porous network is developed on polyetheretherketone (PEEK) surface, in which mouse beta-defensin-14 (MBD-14, a broad-spectrum antimicrobial peptide) is then loaded. It endows PEEK with antibacterial activity and osseointegration. (2). Two in vivo animal models with infection and non-infection are used to prove the new bone formation around the samples. (3). Supplementary material also proves that MBD-14 promotes the osteogenic differentiation of BMSCs. However, its potential mechanism needs to be further studied in future. (4). The modified PEEK, including excellent osseointegration and a durable and broad-spectrum antibacterial activity, could be applied clinically to address PJI which is a hot potato for surgeons and patients undergoing total joint arthroplasty.

Coupling between Osseointegration and Mechanotransduction to Maintain Foreign Body Equilibrium in the Long-Term: A Comprehensive Overview

The permanent interaction between bone tissue and the immune system shows us the complex biology of the tissue in which we insert oral implants. At the same time, new knowledge in relation to the interaction of materials and the host, reveals to us the true nature of osseointegration. So, to achieve clinical success or perhaps most importantly, to understand why we sometimes fail, the study of oral implantology should consider the following advice equally important: a correct clinical protocol, the study of the immunomodulatory capacity of the device and the osteoimmunobiology of the host. Although osseointegration may seem adequate from the clinical point of view, a deeper vision shows us that a Foreign Body Equilibrium could be susceptible to environmental conditions. This is why maintaining this cellular balance should become our therapeutic target and, more specifically, the understanding of the main cell involved, the macrophage. The advent of new information, the development of new implant surfaces and the introduction of new therapeutic proposals such as therapeutic mechanotransduction, will allow us to maintain a healthy host-implant relationship long-term.

Bio Mimicking of Extracellular Matrix

Biomaterials play a critical role in regenerative strategies such as stem cell-based therapies and tissue engineering, aiming to replace, remodel, regenerate, or support damaged tissues and organs. The design of appropriate three-dimensional (3D) scaffolds is crucial for generating bio-inspired replacement tissues. These scaffolds are primarily composed of degradable or non-degradable biomaterials and can be employed as cells, growth factors, or drug carriers. Naturally derived and synthetic biomaterials have been widely used for these purposes, but the ideal biomaterial remains to be found. Researchers from diversified fields have attempted to design and fabricate novel biomaterials, aiming to find novel theranostic approaches for tissue engineering and regenerative medicine. Since no single biomaterial has been found to possess all the necessary characteristics for an ideal performance, over the years scientists have tried to develop composite biomaterials that complement and combine the beneficial properties of multiple materials into a superior matrix. Herein, we highlight the structural features and performance of various biomaterials and their application in regenerative medicine and for enhanced tissue engineering approaches.