Oil production on wastewaters after butanol fermentation by oleaginous yeast Trichosporon coremiiforme

Fermentation performance of oleaginous yeasts on Eucommia ulmoides Oliver hydrolysate: Impacts of the mixed strains fermentation

This present study mainly focused on the investigation and optimization of the fermentation performance of oleaginous yeasts on Eucommia ulmoides Oliver hydrolysate (EUOH), which contains abundant and diverse sugars. More importantly, the impacts of the mixed strains fermentation compared with the single strain fermentation were analyzed and evaluated, through systematic investigations of substrate metabolism, cell growth, polysaccharide and lipid production, COD and ammonia-nitrogen removals. It was found that the mixed strains fermentation could effectively promote a more comprehensive and thorough utilization of the various sugars in EUOH, greatly improve COD removal effect, biomass and yeast polysaccharide production, but could not significantly improve the overall lipid content and ammonia nitrogen removal effect. In this study, when the two strains with the highest lipid content (i.e. L. starkeyi and R. toruloides) were mixed-cultured, the maximum lipid yield of 3.82 g/L was achieved, and the yeast polysaccharide yield, COD and ammonia-nitrogen removal rates of the fermentation (LS+RT) were 1.64 g/L, 67.4% and 74.9% respectively. When the strain with the highest polysaccharide content (i.e. R. toruloides) was mixed-cultured with the strains with strong growth activity (i.e. T. cutaneum and T. dermatis), a large amount of yeast polysaccharides could be obtained, which were 2.33 g/L (RT+TC) and 2.38 g/L (RT+TD) respectively. And the lipid yield, COD and ammonia-nitrogen removal rates of the fermentation (RT+TC), (RT+TD) were 3.09 g/L, 77.7%, 81.4% and 2.54 g/L, 74.9%, 80.4%, respectively.

Metabolic engineering for the production of butanol, a potential advanced biofuel, from renewable resources

Butanol is an important chemical and potential fuel. For more than 100 years, acetone-butanol-ethanol (ABE) fermentation of Clostridium strains has been the most successful process for biological butanol production. In recent years, other microbes have been engineered to produce butanol as well, among which Escherichia coli was the best one. Considering the crude oil price fluctuation, minimizing the cost of butanol production is of highest priority for its industrial application. Therefore, using cheaper feedstocks instead of pure sugars is an important project. In this review, we summarized butanol production from different renewable resources, such as industrial and food waste, lignocellulosic biomass, syngas and other renewable resources. This review will present the current progress in this field and provide insights for further engineering efforts on renewable butanol production.

Comparative study of lipid production from cellulosic ethanol fermentation wastewaters by four oleaginous yeasts

The biochemical treatment of cellulosic ethanol wastewater (CEW) is considered to be an ideal green process. To screen out the best oleaginous yeastfor the utilization of cellulosic ethanol wastewater, four oleaginous yeasts (Trichosporon cutaneum, Rhorosporidium toruloides, Cryptococcus albidus and T. coremiiforme) were compared to assess their abilities for lipid production in terms of biomass production, lipid content and lipid yield. Furthermore, thechemical oxygen demand (COD) conversion rate, COD degradation and fatty acid composition were calculated to analyze the effect of wastewaters treatment. According to the fermentation results, the highest biomass and lipid yield of T. cutaneum in CEW were 20.945 and 1.56 g/L, respectively, while the R. toruloides reached the highest lipid content (17.32%). The maximum conversion rates of T. cutaneum are 73.64 and 6.06%, respectively, in terms of conversion yield of biomass/COD and lipids/COD. The content of fatty acids showed that after six days' fermentation, T. coremiiforme obtained the highest unsaturated fatty acid content, the content of C18:1 and C18:2 was 57.64%. This study suggests that T. cutaneum has great potential for lipid production and wastewaters treatment from cellulosic ethanol fermentation.

Enhancement of lipid productivity from a promising oleaginous fungus

Oleaginous fungi have recently gained increasing attention among different microorganisms due to their ability for lipid production for the preparation of biofuel. In the present study, a locally isolated fungus E45, identified genetically as Aspergillus sp. strain EM2018, was found to produce 25.2% of the total lipids content of its dry cell weight (DCW). Optimization of culture conditions was performed and lipid accumula­tion increased by about 2.4 fold (from 25.2% to 60.1% of DCW) when the fungus was grown for seven days in the potato dextrose (50 g/L) liquid medium at pH 5.0, incubation temperature at 30 ºC and inoculum size of 2 × 106 spore/mL. Supplementation of the medium with yeast extract and NaNO3 at a concentration of 0.05% as organic and inorganic nitrogen sources, respectively, increased lipid production (53.3% lipid/dry biomass). Gas chromatography analysis of fungal lipids revealed the presence of saturated (mainly palmitic acid C16:0 (33%) and lignoceric acid C24:0 (15%)) and unsaturated fatty acids in different proportions (mainly linoleic acid C18:2 (24.4%), oleica cid C18:1 (14%) and arachidonic C20:4 (7.4%). These findings suggest this new oleaginous fungus as a promising feedstock for various industrial applications and for the preparation of biodiesel.

Lumping kinetics of ABE fermentation wastewater treatment by oleaginous yeast Trichosporon cutaneum

Lumping kinetics models were built for the biological treatment of acetone-butanol-ethanol (ABE) fermentation wastewater by oleaginous yeast Trichosporon cutaneum with different fermentation temperatures. Compared with high temperature (33°C, 306 K) and low temperature (23°C, 296 K), medium temperature (28°C, 301 K) was beneficial for the cell growth and chemical oxygen demand (COD) degradation during the early stage of fermentation but the final yeast biomass and COD removal were influenced little. By lumping method, the materials in the bioconversion network were divided into five lumps (COD, lipid, polysaccharide, other intracellular products, other extracellular products), and the nine rate constants (k₁-k₉) for the models can well explain the bioconversion laws. The Gibbs free energy (G) for this bioconversion was positive, showing that it cannot happen spontaneous, but the existence of yeast can after the chemical equilibrium and make the bioconversion to be possible. Overall, the possibility of using lumping kinetics for elucidating the laws of materials conversion in the biological treatment of ABE fermentation wastewater by T. cutaneum has been initially proved and this method has great potential for further application.

Recent advances and industrial viewpoint for biological treatment of wastewaters by oleaginous microorganisms

Recently, technology of using oleaginous microorganisms for biological treatment of wastewaters has become one hot topic in biochemical and environmental engineering for its advantages such as easy for operation in basic bioreactor, having potential to produce valuable bio-products, efficient wastewaters treatment in short period, etc. To promote its industrialization, this article provides some comprehensive analysis of this technology such as its advances, issues, and outlook especially from industrial viewpoint. In detail, the types of wastewaters can be treated and the kinds of oleaginous microorganisms used for biological treatment are introduced, the potential of industrial application and issues (relatively low COD removal, low lipid yield, cost of operation, and lack of scale up application) of this technology are presented, and some critical outlook mainly on co-culture method, combination with other treatments, process controlling and adjusting are discussed systematically. By this article, some important information to develop this technology can be obtained.

Mechanistic insights into the effect of imidazolium ionic liquid on lipid production by Geotrichum fermentans

BACKGROUND

Ionic liquid (IL) pretreatment has emerged as a promising technique that enables complete utilization of lignocellulosic biomass for biofuel production. However, imidazolium IL has recently been shown to exhibit inhibitory effect on cell growth and product formation of industrial microbes, such as oleaginous microorganisms. To date, the mechanism of this inhibition remains largely unknown.

RESULTS

In this study, the feasibility of [Bmim][OAc]-pretreated rice straw hydrolysate as a substrate for microbial lipid production by Geotrichum fermentans, also known as Trichosporon fermentans, was evaluated. The residual [Bmim][OAc] present in the hydrolysate caused a reduction in biomass and lipid content (43.6 and 28.1%, respectively) of G. fermentans, compared with those of the control (7.8 g/L and 52.6%, respectively). Seven imidazolium ILs, [Emim][DEP], [Emim]Cl, [Amim]Cl, [Bmim]Cl, [Bzmim]Cl, [Emim][OAc], and [Bmim][OAc], capable of efficient pretreatment of lignocellulosic biomass were tested for their effects on the cell growth and lipid accumulation of G. fermentans to better understand the impact of imidazolium IL on the lipid production. All the ILs tested inhibited the cell growth and lipid accumulation. In addition, both the cation and the anion of IL contributed to IL toxicity. The side chain of IL cations showed a clear impact on toxicity. On examining IL anions, [OAc]^- was found to be more toxic than those of [DEP]^- and Cl^-. IL exhibited its toxicity by inhibiting sugar consumption and key enzyme (malic enzyme and ATP-citrate lyase) activities of G. fermentans. Cell membrane permeability was also altered to different extents in the presence of various ILs. Scanning electron microscopy revealed that IL induces fibrous structure on the surface of G. fermentans cell, which might represent an adaptive mechanism of the yeast to IL.

CONCLUSIONS

This work gives some mechanistic insights into the impact of imidazolium IL on the cell growth and lipid accumulation of oleaginous yeast, which is important for IL integration in lignocellulosic biofuel production, especially for microbial lipid production.

Feasibility study of biodiesel production using lipids of Hermetia illucens larva fed with organic waste

Hermetia illucens larvae by nature are a decomposer which fed on organic wastes. This study explores the potential of producing biodiesel using lipids from H. illucens larvae. Three types of organic wastes (sewage sludge, fruit waste and palm decanter cake from oil palm mill) were selected based on considerable generation and disposal concern in the area of study as well as lack of investigations as feed for Hermetia illucens larvae in current literatures. Growth rate of the larvae was determined with studying the changes in the biomass per day. H. illucens larvae fed with fruit waste and palm decanter cake have shown growth rates of 0.52±0.02 and 0.23±0.09 g d(-1), respectively. No positive sign of growth were observed in the larvae fed with treated sewage sludge (-0.04±0.01 g d(-1)). Biodiesel as fatty acid methyl ester (FAME) was synthesized by transesterification of the larvae lipid using sulphuric acid as catalyst in methanol. FAME produced was ascertained using ATR-FTIR spectroscopy and GC-MS. The main compositions of fatty acid were found to be C12:0, C16:0 and C18:1n9c. Fatty acid composition of C12:0 fed with fruit waste, sewage sludge and palm decanter was found to be most abundant in the larvae lipid. The amount of C12:0 obtained was 76.13%, 58.31% and 48.06%, respectively. In addition, fatty acid of C16:0 was attained at 16.48% and 25.48% fed with sewage sludge and palm decanter, respectively. Based on the findings, FAME derived from larvae lipids is feasible to be used for biodiesel production.

Utilisation of potato processing wastewater for microbial lipids and γ-linolenic acid production by oleaginous fungi

BACKGROUND

Microbial lipids are considered as the starting material for production of second-generation biofuels and their polyunsaturated fatty acids are rich sources of neutraceuticals. Exploring cheap feedstock for producing microbial lipids is necessary. The present study examined the potential of microbial lipids and γ-linolenic acid (GLA) production by two oleaginous fungi, Aspergillus flavus I16-3 and Mucor rouxii, with potato processing wastewater as a low-cost or no-cost nutrient source.

RESULTS

Biochemistry and physiology of two oleaginous fungi, A. flavus I16-3 and M. rouxii, on lipid accumulation showed the two fungi grew well and efficiently utilised the starch in wastewater. On average (P < 0.05), 2.8 and 3.6 g L(-1) of lipids were produced by A. flavus I16-3 and M. rouxii, respectively, with maximum GLA yields of 60 and 100 mg L(-1) . Addition of nutrients to raw wastewater significantly improved (P < 0.05) the lipid and GLA yields; 3.5 and 4.2 g L(-1) of lipids, and 100 and 140 mg L(-1) of GLA were produced by A. flavus I16-3 and M. rouxii, respectively. In addition, the wastewater was efficiently treated, with soluble chemical oxygen demand, total soluble nitrogen and total soluble phosphorus removals up to 60% and 90%, 100% and 98%, and 92% and 81% by A. flavus I16-3 and M. rouxii, respectively.

CONCLUSION

This study demonstrated an alternative approach to valorise potato processing wastewater to produce microbial lipids and GLA (nutraceuticals).

Evaluating the possibility of using acetone-butanol-ethanol (ABE) fermentation wastewater for bacterial cellulose production by Gluconacetobacter xylinus

To reduce the cost of bacterial cellulose (BC) production, the possibility of using acetone-butanol-ethanol (ABE) fermentation wastewater with high COD value (18 050 mg l(-1) ) for BC production by Gluconacetobacter xylinus was evaluated. After 7 days of fermentation, the highest BC yield (1·34 g l(-1) ) was obtained. The carbon sources including sugars (glucose and xylose), organic acids (acetic acid and butyric acid) and alcohol compounds (ethanol and butanol) were utilized by G. xylinus simultaneously during fermentation. Although the COD decrease ratio (about 14·7%) was low, the highest BC yield on COD consumption (56·2%, g g(-1) ) was relatively high and the remaining wastewater could be used for further BC fermentation. Besides, the environment of ABE fermentation wastewater showed small influence on the BC structure by comparison with the BC products obtained in traditional HS medium using field emission scanning electron microscope (FE-SEM), Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD). Overall, ABE fermentation wastewater is one promising substrate for BC production.

SIGNIFICANCE AND IMPACT OF THE STUDY

The possibility of using acetone-butanol-ethanol (ABE) fermentation wastewater for bacterial cellulose (BC) production by Gluconacetobacter xylinus was evaluated in this study. This is the first time that ABE fermentation wastewater was used as substrate for BC fermentation. The results provide detail information of metabolism of G. xylinus in ABE fermentation wastewater and the influence of wastewater environment on the structure of BC samples. Overall, this bioconversion could reduce the cost of BC production greatly.

Evaluation of an aerobic treatment for olive mill wastewater detoxification

Olive mill wastewater (OMWW) is a by-product of the olive oil extraction industry. Its dumping creates severe environmental problems in the Mediterranean countries. The phytoxicity of OMWW is due to the phenolic substances and is evaluated through a genotoxicity method. An aerobic treatment of OMWW was conducted during 45 days. Different concentrations of raw and treated OMWW were tested using the Vicia faba micronuclei test. Results showed that raw OMWW induced significant micronuclei formation at 10% of OMWW dilution. At 20% of dilution, no mitosis was recorded. The 45 days aerobic treatment OMWW showed an important decrease in the genotoxicity and also in the toxicity that was observed at 10% and 20% OMWW dilution. This could be correlated with the biodegradation of 76% of the total phenols. Indeed, qualitative analysis by high performance liquid chromatography shows the disappearance of the majority of phenolic compounds after 45 days of treatment. This study was completed by an agricultural test with V. faba plant. Data showed significant growth yield of 36.3% and 29.9% after being irrigated with 5 and 10 t/ha, respectively. These results supported the positive role of aerobic treatment on OMWW and their capacity to ameliorate the agronomic potential of these effluents.

Production of biodiesel from carbon sources of macroalgae, Laminaria japonica

As aquatic biomass which is called "the third generation biomass", Laminaria japonica (also known as Saccharina japonica) consists of mannitol and alginate which are the main polysaccharides of algal carbohydrates. In this study, oleaginous yeast (Cryptococcus curvatus) was used to produce lipid from carbon sources derived from Laminaria japonica. Volatile fatty acids (VFAs) were produced by fermentation of alginate extracted from L. japonica. Thereafter, mannitol was mixed with VFAs to culture the oleaginous yeast. The highest lipid content was 48.30%. The composition of the fatty acids was similar to vegetable oils. This is the first confirmation of the feasibility of using macroalgae as a carbon source for biodiesel production.

Microbial lipid production from potato processing wastewater using oleaginous filamentous fungi Aspergillus oryzae

Use of potato processing wastewater for microbial lipid production by oleaginous filamentous fungus Aspergillus oryzae was studied with the purpose of recycling potato processing wastewater for biodiesel production. The wastewater contained high concentrations of solids, starch and nutrients. Sterilization of the potato processing wastewater resulted in a thick gelatinized medium, causing the fungi to grow slow. In order to overcome this problem, the wastewater was diluted with tap water at three dilution ratios (25%, 50% and 75% before fermentation). Dilution of the wastewater not only enhanced lipid production, starch utilization and amylase secretion but also COD and nutrient removal. The dilution ratio of 25% was found to be optimum for lipid production and the maximum lipid concentration obtained was 3.5 g/L. Lipid accumulation was influenced by amylase secretion, and the amylase activity was up to 53.5 IU/mL at 25% dilution. The results show that phosphate limitation may be the mechanism to stimulate the lipid accumulation. In addition to lipid production, removals of COD, total soluble nitrogen and total soluble phosphorus up to 91%, 98% and 97% were achieved, respectively. Microbial lipids of A. oryzae contained major fatty acids such as palmitic acid (11.6%), palmitolic acid (15.6%), stearic acid (19.3%), oleic acid (30.3%), linolenic acid (5.5%) and linoleic acid (6.5%) suggesting that the lipids be suitable for second generation biodiesel production.

Microbial synthesis of n-butanol, isobutanol, and other higher alcohols from diverse resources

Microbial production of fuel and chemical feedstock is a promising approach to solving energy and environmental problems. n-Butanol, isobutanol and other higher alcohols are of particular interest because they can serve as both fuel and chemical feedstock. Alternative resources such as CO2, syngas, waste protein, and lignocellulose are currently being investigated for their potential to produce these compounds. Except for lignocellulose, utilization of such alternative resource has not been examined extensively. This review aims to summarize the development of metabolic pathways for efficient synthesis of these higher alcohols and the current status of microbial strain development for the conversion of diverse resources into higher alcohols.

Coupling ozone and hollow fibers membrane bioreactor for enhanced treatment of gaseous xylene mixture

Two hollow fiber membrane bioreactors (HFMBRs) inoculated with activated sludge were used in series to biodegrade continuously mixed xylene. The influence of gas residence time (τ) and mass loading rate (LR) on elimination capacity (EC) of the mixed xylene was investigated. A maximum elimination capacity (EC(max,v)) of 466gm(-3)h(-1) was achieved at τ=10s and LR(v)=728gm(-3)h(-1). Thereafter, ozone was introduced into inlet gas and the influence of ozone was investigated. Results showed that the maximum xylene elimination capacity increased from 524gm(-3)h(-1) to 568gm(-3)h(-1) and 616gm(-3)h(-1) at τ=10s, respectively when the inlet ozone concentration rose from 200mgm(-3) to 400mgm(-3) and 600mgm(-3), respectively. HFMBR coupled with O(3) has higher performance and stability for the long-term operation at the same condition.