Bioaugmentation of biological contact oxidation reactor (BCOR) with phenol-degrading bacteria for coal gasification wastewater (CGW) treatment

Biodegradation of phenolic pollutants and bioaugmentation strategies: A review of current knowledge and future perspectives

The widespread use of phenolic compounds renders their occurrence in various environmental matrices, posing ecological risks especially the endocrine disruption effects. Biodegradation-based techniques are efficient and cost-effective in degrading phenolic pollutants with less production of secondary pollution. This review focuses on phenol, 4-nonylphenol, 4-nitrophenol, bisphenol A and tetrabromobisphenol A as the representatives, and summarizes the current knowledge and future perspectives of their biodegradation and the enhancement strategy of bioaugmentation. Biodegradation and isolation of degrading microorganisms were mainly investigated under oxic conditions, where phenolic pollutants are typically hydroxylated to 4-hydroxybenzoate or hydroquinone prior to ring opening. Bioaugmentation efficiencies of phenolic pollutants significantly vary under different application conditions (e.g., increased degradation by 10-95% in soil and sediment). To optimize degradation of phenolic pollutants in different matrices, the factors that influence biodegradation capacity of microorganisms and performance of bioaugmentation are discussed. The use of immobilization strategy, indigenous degrading bacteria, and highly competent exogenous bacteria are proposed to facilitate the bioaugmentation process. Further studies are suggested to illustrate 1) biodegradation of phenolic pollutants under anoxic conditions, 2) application of microbial consortia with synergistic effects for phenolic pollutant degradation, and 3) assessment on the uncertain ecological risks associated with bioaugmentation, resulting from changes in degradation pathway of phenolic pollutants and alterations in structure and function of indigenous microbial community.

Electrocatalysis coupled heterogeneous electro-Fenton like treatment of coal gasification wastewater using tourmaline as catalyst: process parameters and response surface

Coal gasification technology is essential for realizing clean and efficient conversion of coal, as well as for reducing carbon emissions. However, coal gasification technology is accompanied by a large amount of coal gasification wastewater that is biodegradable. In this work, tourmaline was applied as a catalyst in electro-Fenton like process for treating coal gasification wastewater. The optimal applied parameters of coal gasification wastewater were investigated as follows: current density of 90 mA cm-2, tourmaline dosage of 8 g L-1, electrode gap of 1 cm, and temperature at 25 °C; the COD removal ratio reached 91.24% after 240-min treatment. In addition, the current density and tourmaline dosage were further optimized by response surface method. The result was about current density with 82.4 mA cm-2 and catalyst with 7.57 g L-1; the predicted COD removal efficiency was 86.91%. Under the optimal parameters the actual COD removal efficiency was 88.25% a little high than the predicted value. To explore the reusability of tourmaline as Fenton reaction catalyst, five cycles of experiments were carried out. The result demonstrated that tourmaline could be used as catalyst for treating coal gasification wastewater by electro-Fenton like process.

Overview of enhancing biological treatment of coal chemical wastewater: New strategies and future directions

Coal chemical wastewater (CCW) is a type of refractory industrial wastewater, and its treatment has become the main bottleneck restricting the sustainable development of novel coal chemical industry. Biological treatment is considered as an economical, effective and environmentally friendly technology for CCW treatment. However, conventional biological process is difficult to achieve the efficient removal of refractory organics because of CCW with the characteristics of composition complexity and high toxicity. Therefore, seeking the novel enhancement strategy appears to be a favorable solution for enhancing biological treatment efficiency of CCW. This review focuses on presenting a comprehensive picture about the exogenous enhancement strategies for CCW biological treatment. The performance and potential application of exogenous enhancement strategies, including co-metabolic substrate enhancement, biofilm filler enhancement, adsorption material enhancement and conductive mediator enhancement, were expounded. Meanwhile, the enhancing mechanisms of different strategies were comprehensively discussed from a biological perspective. Furthermore, the prospects of enhancement strategies based on the engineering performance, economic cost and environmental impact (3E) evaluation were introduced. And novel enhancement strategy based on "low carbon emissions", "resource recycling" and "water environment security" in the context of carbon neutrality was proposed. Taken together, this review provides technical reference and new direction to facilitate the regulation and optimization of typical industrial wastewater biological treatment.

Microbial metabolism regulation on the efficient degradation of aromatic compounds for biochemical treatment process of coal chemical wastewater in pilot scale

At present, the common problems of biochemical treatment systems of coal chemical wastewater were the poor system stability and the difficulty in reaching COD discharge standards. Aromatic compounds were the main contributors to COD value. The effective removal of aromatic compounds was an urgent problem in the biochemical treatment systems of coal chemical wastewater. In this study, the dominant microbial strains that could degrade phenol, quinoline, and phenanthrene were isolated respectively and inoculated into the pilot scale biochemical tank of coal chemical wastewater. The regulation effect and mechanism of microbial metabolism on the efficient degradation of aromatic compounds were studied. The results indicated that the various aromatic compounds were significantly removed under the regulation of microbial metabolism, the removal efficiencies of COD, TOC, phenols, benzenes, N-CHs, and PAHs were increased by about 25%, 20%, 33%, 25%, 42%, and 45%, respectively, and their biotoxicity was also drastically reduced. Moreover, the abundance and diversity of microbial community, and the microbial activity were obviously improved, as well as the various functional strains were selectively enriched, suggesting that the regulation system could resist environmental stresses with high substrate concentration and toxicity, which could lead to more enhanced performance for aromatic compounds removal. In addition, the microbial EPS content was significantly increased, implying the formation of microbial hydrophobic cell surfaces, which could improve the bioavailability of aromatic compounds. Furthermore, the enzymatic activity analysis revealed that the relative abundance and activity of key enzymes were all obviously improved. In conclusion, multiple lines of evidence were provided to clarify the regulation mechanism of microbial metabolism on the efficient degradation of aromatic compounds for biochemical treatment process of coal chemical wastewater in pilot scale. The results laid a good foundation for realizing the harmless treatment of coal chemical wastewater.

Discovery by metagenomics of a functional tandem repeat sequence that controls gene expression in bacteria

The ability to degrade exogenous compounds is acquired by adaptive processes of microorganisms when they are exposed to compounds that are foreign to their existing enzyme systems. Previously, we reported that simultaneous point mutations and mobile genetic elements cause the evolution and optimization of the degradation systems for aromatic compounds. In the present study, we propose another element with this role—tandem repeats. The novel metagenomic tandem repeat (MTR) sequence T(G/A)ACATG(A/C)T was identified in the 5′-untranslated regions of catechol 2,3-dioxygenase (C23O)-encoding genes by metagenomic analysis. Recombinant Escherichia coli carrying a C23O gene with various numbers of MTRs exhibited increased C23O protein expression and enzyme activity compared with cells expressing the C23O gene without MTRs. Real-time reverse transcription-PCR showed that changes in the numbers of MTRs affected the levels of detectable C23O mRNA in the E. coli host. Furthermore, the mRNAs transcribed from C23O genes containing various numbers of MTRs had longer half-lives than those transcribed from a C23O gene without MTRs. Thus, MTRs would affect the translation efficiency of the gene expression system. MTRs may change the expression levels of their downstream genes for adaptation to a fluctuating environment.

Waste management in the mining industry of metals ores, coal, oil and natural gas - A review

Waste generated due to mining activity poses a serious issue due to the large amounts generated, even up to 65 billion tons per year, and is often associated with the risk posed by its storage and environmental management. This work aims to review waste management in the mining industry of metals ores, coal, oil and natural gas. It includes an analysis and discussion on the possibilities for reuse of certain types of wastes generated from mining activity, and discusses the benefits, disadvantages and the impact of waste management on the environment. The article presents current methods of waste management arising during the extraction and processing of raw materials and the threats resulting from its application. Furthermore, the potential methods of mining waste management are discussed through an in-depth characterization of the properties and composition of various types of rocks. The presented work addresses not only the issues of more sustainable management of waste from the mining industry, but also responds to the current efforts to implement the assumptions of a circular economy, which is aimed at closing the loop. The methods of recycling by-products and treating waste as a resource more and more often not only meet environmental expectations, but also become a legal requirement. In this respect, the presented work can serve as a valuable support in decision-making about waste management.

Effects of polyurethane foam carrier addition on anoxic/aerobic membrane bioreactor (A/O-MBR) for coal gasification wastewater (CGW) treatment: Performance and microbial community structure

Coal gasification wastewater (CGW) is a typical toxic and refractory industrial wastewater with abundant phenols contained. Two identical anoxic/aerobic membrane bioreactors (with (R2) and without (R1) polyurethane (PU) foam) were carried out in parallel to investigate the role of PU foam addition in enhancing pollutants removal in CGW. Results showed that both systems exhibited effective removal of chemical oxygen demand (>93%) and total phenols (>97%) but poor ammonia nitrogen removal (<35%) constrained by ammonia oxidation process. GC-MS analysis revealed that aromatic and other refractory intermediates were dramatically reduced in R2. Moreover, the PU addition had negligible influence on the total soluble microbial products and extracellular polymeric substances contents but significantly alleviated membrane fouling with the operating time 33% prolonged. Microbial community revealed that Flavobacterium, Holophaga, and Geobacter were enriched on PU. Influent type might be a main driver for microbial community succession.

Construction of a novel microbial consortium valued for the effective degradation and detoxification of creosote-treated sawdust along with enhanced methane production

Lignocellulosic biomass represents an unlimited and ubiquitous energy source, which can effectively address current global challenges, including climate change, greenhouse gas emissions, and increased energy demand. However, lignocellulose recalcitrance hinders microbial degradation, especially in case of contaminated materials such as creosote (CRO)-treated wood, which necessitates appropriate processing in order to eliminate pollution. This study might be the first to explore a novel bacterial consortium SST-4, for decomposing birchwood sawdust, capable of concurrently degrading lignocellulose and CRO compounds. Afterwards, SST-4 which stands for molecularly identified bacterial strains Acinetobacter calcoaceticus BSW-11, Shewanella putrefaciens BSW-18, Bacillus cereus BSW-23, and Novosphingobium taihuense BSW-25 was evaluated in terms of biological sawdust pre-treatment, resulting in effective lignocellulose degradation and 100% removal of phenol and naphthalene. Subsequently, the maximum biogas production observed was 18.7 L/kg VS, while cumulative methane production was 162.8 L/kg VS, compared to 88.5 without microbial pre-treatment. The cumulative energy production from AD-I and AD-II through biomethanation was calculated as 3177.1 and 5843.6 KJ/kg, respectively. The pretreatment process exhibited a significant increase in the energy yield by 83.9%. Lastly, effective CRO detoxification was achieved with EC₅₀ values exceeding 90%, showing the potential for an integrated process of effective contaminated wood management and bioenergy production.

Calcium modified basalt fiber bio-carrier for wastewater treatment: Investigation on bacterial community and nitrogen removal enhancement of bio-nest

Modified basalt fiber (MBF) is a sustainable material studied as novel wastewater treatment bio-carrier recently. This work studied the effects of calcium modification on the bacterial affinity of modified fiber (Ca-MBF), bacterial community, and nitrogen removal performance. Results showed that Ca-MBF with hydrophilic (62.66°) and positively-charged (7.80 mV) surface accelerated bacterial attachment. Volatile suspended solids on Ca-MBF (5.46 g VSS/g fiber) were increased by 2.61 times after modification, with high bacterial activity when bio-carriers were cultured in activated sludge. Extracellular polymeric substances on Ca-MBF was 4.35 times higher and consisted of more protein. Bio-nests with unique aerobic/anaerobic structure formed on the ultrafine carriers in bioreactor. Ca-MBF bioreactor exhibited total nitrogen removal efficiency above 72.2% and COD removal efficiency above 94.2% with more stable performance than unmodified carrier in long-term treatment using synthetic domestic wastewater.16S rRNA gene sequencing revealed enhanced abundance of nitrifying and denitrifying bacteria in Ca-MBF bio-nest.

Performance, mechanism and stability of nitrogen-doped sewage sludge based activated carbon supported magnetite in anaerobic degradation of coal gasification wastewater

In current study, the UASB reactor was enhanced by nitrogen-doped sewage sludge based activated carbon supported Fe₃O₄ (Fe₃O₄/N-SBAC) for coal gasification wastewater treatment. The results showed that COD removal efficiency was increased to 64.4% with Fe₃O₄/N-SBAC assistance and the corresponding methane production rate achieved up to 1093.6 mL/d. Fe₃O₄/N-SBAC promoted microbial growth and enzymatic activity, leading to high extracellular polymeric substances and coenzyme F₄₂₀ concentrations. Fe₃O₄/N-SBAC also facilitated the sludge granulation process with high particle size, substantial interspecific signal molecules and low diffusible signal factor. Microbial community analysis revealed that Fe₃O₄/N-SBAC might support direct interspecies electron transfer process, in which the enriched Geobacter was likely to communicate with Methanothrix via electrical connection, improving anaerobic degradation of coal gasification wastewater. Total phenols shock and pH impact revealed that reactor stability was enhanced in the Fe₃O₄/N-SBAC-supplemented system.

Ultrasound-assisted electrochemical treatment for phenolic wastewater

With the rapid development of industry, especially the rapid rise of the chemical industry, the problem of water pollution is becoming more and more serious. Among them, the discharge of organic pollutants represented by phenolic substances has always been at the forefront. In this paper, ultrasound-assisted electrochemical treatment for phenolic wastewater is investigated. The effects of ultrasonic frequency, current, pH value and the amount of fly ash-loaded titanium TiO₂-Fe³⁺ particles on phenol removal from phenol-containing wastewater are investigated. The experimental results demonstrate that the removal rate of phenol in phenol-containing wastewater is the best when ultrasonic frequency is 45 kHz, power is 200 W, the current is 1.2 A, pH is 5 and the dosage of fly ash-loaded titanium TiO₂-Fe³⁺ particles is 3 g. In addition, microwave-assisted-Fenton reagent treatment for phenol wastewater is investigated. The effects of Fenton reagent dosage, initial pH value, microwave power density and radiation time on phenol degradation rate are investigated. The results show that microwave can accelerate the reaction rate, reduce the number of metal ions, save the process cost and reduce the difficulty of post-treatment. Finally, the research status of phenol wastewater treatment technology at the present stage is reviewed, and the future development direction is discussed.

Analysis of the Bioaugmentation Potential of Pseudomonas putida OR45a and Pseudomonas putida KB3 in the Sequencing Batch Reactors Fed with the Phenolic Landfill Leachate

The treatment of landfill leachate could be challenging for the biological wastewater treatment systems due to its high toxicity and the presence of poorly biodegradable contaminants. In this study, the bioaugmentation technology was successfully applied in sequencing batch reactors (SBRs) fed with the phenolic landfill leachate by inoculation of the activated sludge (AS) with two phenol-degrading Pseudomonas putida OR45a and Pseudomonas putida KB3 strains. According to the results, the SBRs bioaugmented with Pseudomonas strains withstood the increasing concentrations of the leachate. This resulted in the higher removal efficiency of the chemical oxygen demand (COD) of 79–86%, ammonia nitrogen of 87–88% and phenolic compounds of 85–96% as compared to 45%, 64%, and 50% for the noninoculated SBR. Simultaneously, the bioaugmentation of the AS allowed to maintain the high enzymatic activity of dehydrogenases, nonspecific esterases, and catalase in this ecosystem, which contributed to the higher functional capacity of indigenous microorganisms than in the noninoculated AS. Herein, the stress level experienced by the microorganisms in the SBRs fed with the leachate computed based on the cellular ATP measurements showed that the abundance of exogenous Pseudomonas strains in the bioreactors contributed to the reduction in effluent toxicity, which was reflected by a decrease in the stress biomass index to 32–45% as compared to the nonbioaugmented AS (76%).

Simultaneous nitrification and denitrification (SND) bioaugmentation with Pseudomonas sp. HJ3 inoculated for enhancing phenol and nitrogen removal in coal gasification wastewater

A simultaneous nitrification and denitrification (SND) bioaugmention system with Pseudomonas sp. HJ3 inoculated was established to explore the potential of simultaneous phenol and nitrogen removal in coal gasification wastewater (CGW). When the concentration of influent chemical oxygen demand (COD) and total phenols (TPh) was 1,765.94 ± 27.43 mg/L and 289.55 ± 10.32 mg/L, the average removal efficiency of COD and TPh at the stable operating stage reached 64.07% ± 0.76% and 74.91% ± 0.33%, respectively. Meanwhile, the average removal efficiency of NH₄ ⁺-N and total nitrogen (TN) reached 67.96% ± 0.17% and 57.95% ± 0.12%, respectively. The maximum SND efficiency reached 83.51%. Furthermore, SND bioaugmentation performed with good nitrification tolerance of phenol shock load and significantly reduced toxic inhibition of organisms. Additionally, the microbial community analysis indicated that Pseudomonas sp. HJ3 was the predominant bacterium in the SND bioaugmentation system. Moreover, the indigenous nitrogen removal bacteria such as Thauera, Acidovorax and Stenotrophomonas were enriched, which further enhanced the nitrogen removal in the SND bioaugmentation system. The results demonstrated the promising application of SND bioaugmentation for enhancing simultaneous phenol and nitrogen removal in CGW treatment.

How the bacterial community of a tannery effluent responds to bioaugmentation with the consortium SFC 500-1. Impact of environmental variables

Bioaugmentation with the consortium SFC 500-1 is a promising alternative to remediate wastewaters, such as tannery effluents. With the aim of assessing the changes produced in response to bioaugmentation, bacterial 16S rDNA genes were sequenced with Illumina MiSeq Platform. Additionally, bacterial and fungal groups were analyzed through standard culture dependent methods. The impact of diverse physico-chemical and microbiological parameters on the prokaryotic diversity was also evaluated throughout. Bacteroidetes, Firmicutes and Proteobacteria, represented together up to 91% of the total number of sequences obtained from the tannery effluent. Diversity decreased immediately after inoculation, due to an increase in the representation of the taxa to which the added consortium belongs. However, bioaugmentation produced no greater variations since only a 10% of unique operational taxonomic units were found in the inoculated treatment. An increase in the abundance of Myroides and a reduction in the representation of Proteiniclasticum and Halomonas were major observed variations. On the other hand, pH and dissolved oxygen constituted main environmental factors affecting the structure of the prokaryotic communities. In all treatments yeasts increased over time, to the detriment of filamentous fungi. Together, data from this report may contribute to the development of improved bioremediation strategies of industrial wastewaters.

An integrated bioaugmentation/electrocoagulation concept for olive mill wastewater management and the reuse in irrigation of biofuel plants: a pilot study

A consortium of highly degrading microorganisms was used in an integrated bioaugmentation/electrocoagulation process for treating olive mill wastewater. The system was investigated for treating 1 m³ day^-1, at a pilot scale, for 2 years; hydraulic loading rate and organic loading rate were 2880 l m^-2 day^-1 and 37,930 g COD m^-2 day^-1, respectively. Average removal efficiency for COD, oils, and total phenols was 63.9%, 85.2%, and 43.6%, respectively. The olive mill consortium, OMC, consisted of seven actinomycete strains. The strains were confirmed, by 16S rDNA analysis, to belong to five Streptomyces, one Kitasatospora, and one Micromonospora strains, at 100-99.06% similarities. Hydrolytic enzyme activities of OMC strains were remarkably higher for degrading cellulosic and lipid constituents (enzyme-cumulative indices, 14-16.1), than the phenolic constituents (indices, 4.1-6.5). The establishment of actinomycetes in the treatment system was indicated by their increased counts in the biofilm at the end of the biofilter, reaching 13-fold higher than that in the control bed. The treated effluent was toxic to the seedlings of Jatropha curcas (Jatropha) and Simmondsia chinensis (Jojoba). Though its application in irrigation of 3-year-old Jatropha shrubs, significantly, enhanced the fruit yield up to 1.85-fold higher than the control, without affecting the seed oil content, after 3-month application, the irrigated soil showed insignificant changes in its biochemical properties. This developed bioaugmentation/electrocoagulation process can treat wastewater with extremely high organic strength, while its approximate construction and operational costs are limited to 0.03 and 0.51 US$ m^-3, respectively. It produces a treated effluent that can be reused in irrigation of specific plants. Graphical abstract.

Nitrogen removal from coke making wastewater through a pre-denitrification activated sludge process

Under the Industrial Emissions Directive (IED), coke production wastewater must be treated to produce an effluent characterised by a total nitrogen (TN) <50 mg/L. An anoxic-aerobic activated sludge pilot-plant (1 m³) fed with coke production wastewater was used to investigate the optimal operational requirements to achieve such an effluent. The loading rates applied to the pilot-plant varied between 0.198-0.418 kg COD/m³.day and 0.029-0.081 kg TN/m³.day, respectively. The ammonia (NH₄⁺-N) removals were maintained at 96%, after alkalinity addition. Under all conditions, phenol and SCN^- remained stable at 96% and 100%, respectively with both being utilised as carbon sources during denitrification. The obtained results showed that influent soluble chemical oxygen demand (sCOD) to TN ratio of should be maintained at >5.7 to produce an effluent TN <50 mg/L. Furthermore, nitrite accumulation was observed under all conditions indicating a disturbance to the denitrification pathway. Overall, the anoxic-aerobic activated sludge process was shown to be a robust and reliable technology to treat coke making wastewater and achieve the IED requirements. Nevertheless, the influent to the anoxic tank should be monitored to ensure a sCOD:TN ratio >5.7 or, alternately, the addition of an external carbon source should be considered.

Bioaugmentation of membrane bioreactor with Achromobacter denitrificans strain PR1 for enhanced sulfamethoxazole removal in wastewater

Achromobacter denitrificans strain PR1, previously found to harbour specific degradation pathways with high sulfamethoxazole (SMX) degradation rates, was bioaugmented into laboratory-scale membrane bioreactors (MBRs) operated under aerobic conditions to treat SMX-containing real domestic wastewater. Different hydraulic retention times (HRTs), which is related to reaction time and loading rates, were considered and found to affect the SMX removal efficiency. The availability of primary substrates was important in both bioaugmented and non-bioaugmented activated sludge (AS) for cometabolism of SMX. High HRT (24 h) resulted in low food to microorganism ratio (F/M) and low SMX removal, due to substrate limitation. Decrease in HRT from 24 h to 12 h, 6 h and finally 4 h led to gradual increases in primary substrates availability, e.g. organic compounds and ammonia, resulted in increased SMX removal efficiency and degradation rate, and is more favorable for high-rate wastewater treatment processes. After inoculation into the MBRs, the bioaugmentation strain was sustained in the reactor for a maximum of 31 days even though a significant decrease in abundance was observed. The bioaugmented MBRs showed enhanced SMX removal, especially under SMX shock loads compared to the control MBRs. The results of this study indicate that re-inoculation is required regularly after a period of time to maintain the removal efficiency of the target compound.

Selective recovery of salt from coal gasification brine by nanofiltration membranes

The selective extraction and concentration of salt from coal gasification brine (CGB) by nanofiltration membranes is a promising technology to achieve near-zero liquid discharge of coal gasification wastewater. To investigate the feasibility of recovery of salts and the interaction of organic compounds, multivalent ions and monovalent ions on the rejection ratio, three nanofiltration membranes (OWNF1, NF270 and Desal-5 DK) with an 1812 spiral-wound module were used in crossflow filtration. The rejection mechanism was analyzed by comparing the rejection performance as a function of the operation pressure (increasing from 1.0 MPa to 2.5 MPa), the concentration (increasing from 10,000 mg/L to 25,000 mg/L) and pH values (increasing from 3.0 to 10.0). The concentrations of anions and cations were determined using an ion chromatographic analyzer and an inductively coupled plasma emission spectrometer, respectively. The results show that the rejection of sulfate and the chemical oxygen demand were higher than 92.12% and 78.84%, respectively, at appropriate operation, while negative rejection of chloride was observed in the CGB. The decreasing rejection of organic compounds was due to swelling of the membrane pore in high-concentration solutions. Meanwhile, the organic compounds weakened the negative charge of the membrane active layer, consequently decreasing the ion rejection. More than 85% of the sodium chloride could be recovered, indicating that this technology is suitable for resource recovery from CGB and near-zero liquid discharge of coal gasification industry.

Overview of the state of the art of processes and technical bottlenecks for coal gasification wastewater treatment

CGWW is major waste stream resulting from a number of activities of the low/medium temperature gasification unit that occurs during the production of natural gas. The resulting effluent contains a broad spectrum of organic and inorganic contaminants and exerts a negative influence on the environment, mainly due to the presence of toxic and refractory compounds. So far, various technologies have been applied for treatment of CGWW, while few reviews are available in the literature. Thus, this review attempts to offer a comprehensive picture about CGWW. An overview about pretreatment, biological and advanced processes for treatment of CGWW is presented, and the degradation mechanism of toxic and refractory pollutants is also elaborated. Technical bottlenecks existing in the operation of coal chemical industries, including foam proliferation, odors and biotoxicity risk, are detailed analyzed. Finally, the prospects of treatment for CGWW are discussed based on the concept of "wastewater is money". The review can be provided as an effective technical support for the construction and operation of coal gasification industries.

Enhanced nitrogen removal from coal gasification wastewater by simultaneous nitrification and denitrification (SND) in an oxygen-limited aeration sequencing batch biofilm reactor

Simultaneous nitrification and denitrification (SND) for treating coal gasification wastewater (CGW) was achieved successfully in a lab-scale sequencing batch biofilm reactor (SBBR) by oxygen-limited aeration. SND efficiency increased gradually with the concentration of dissolved oxygen (DO) decreased from 4.5mg/L to 0.35mg/L. The maximum SND efficiency of 81.23% was obtained at DO concentration of 0.35mg/L, and the corresponding removal efficiency of NH₄⁺-N and TN reached 76.91% and 70.23%, respectively. Meanwhile, COD was removed significantly and toxic compounds were degraded into biodegradable substances, which relieved effectively the inhibition on nitrogen removal. The results indicated that oxygen-limited condition performed greater toxic compounds and nitrogen removal compared with the aerobic condition. Furthermore, the results of scanning electron microscopic (SEM) and microbial community structure confirmed robust biofilm formation provided a suitable anoxic micro-environment for co-existence of nitrifying and denitrifying bacteria and organics degradation bacteria in the reactor at oxygen-limited condition.

Microbial community composition and function in a pilot-scale anaerobic-anoxic-aerobic combined process for the treatment of traditional Chinese medicine wastewater

Biodegradation of traditional Chinese medicine (TCM) wastewater was investigated in a pilot-scale anaerobic-anoxic-aerobic combined process, which was composed of an expanded granular sludge blanket (EGSB) reactor, a hydrolysis acidification (HA) reactor and a biological contact oxidation (BCO) reactor. In stable stage, the average values of COD and color in the combined process effluent were 45.7mgL^-1 and 13 times, respectively. Excellent linear relations (R²>0.915) were achieved between color and UV₂₅₄ at three color levels. Comprehensive community structures of the combined process were analysed by Illumina MiSeq Sequencing, which revealed that microbial community in the aerobic reactor had the greatest diversity and richness. Bacteroidetes, Firmicutes and Proteobacteria were dominant phyla in the three reactors, and Bacteroidales, Geobacter, ZB2 were the predominant functional microorganisms in the anaerobic, anoxic and aerobic reactors, respectively. Good removal efficiencies and presence of core microorganisms confirmed that the combined process was feasible for treating TCM wastewater.

A review: Driving factors and regulation strategies of microbial community structure and dynamics in wastewater treatment systems

The performance and stabilization of biological wastewater treatment systems ¹are closely related to the microbial community structure and dynamics. In this paper, the effects and mechanisms of influent composition, process configuration, operating parameters (dissolved oxygen [DO], pH, hydraulic retention time [HRT] and sludge retention time [SRT]) and environmental condition (temperature) to the change of microbial community structure and process performance (nitrification, denitrification, biological phosphorus removal, organics mineralization and utilization, etc.) are critically reviewed. Furthermore, some strategies for microbial community structure regulation, mainly bioaugmentation, process adjustment and operating parameters optimization, applied in the current wastewater treatment systems are also discussed. Although the recent studies have strengthened our understanding on the relationship between microbial community structure and wastewater treatment process performance, how to fully tap the microbial information, optimize the microbial community structure and maintain the process performance in wastewater treatment systems are still full of challenges.

Bioaugmentation: an effective commercial technology for the removal of phenols from wastewater

Phenol represents a huge problem in industrial wastewater effluents and needs to be removed due to its toxic and carcinogenic nature. The removal of phenol from the wastewater is often both expensive and time consuming; there is therefore a requirement for a more effective, sustainable solution for the removal of phenol from wastewaters. Bioaugmentation or the addition of phenol degrading microorganisms to contaminated effluents is one such sustainable approach being considered. Here, we describe how bioaugmentation has been applied for the biological treatment of phenol in industrial wastewaters.

An advanced anaerobic biofilter with effluent recirculation for phenol removal and methane production in treatment of coal gasification wastewater

An advanced anaerobic biofilter (AF) was introduced for the treatment of coal gasification wastewater (CGW), and effluent recirculation was adopted to enhance phenol removal and methane production. The results indicated that AF was reliable in treating diluted CGW, while its efficiency and stability were seriously reduced when directly treating raw CGW. However, its performance could be greatly enhanced by effluent recirculation. Under optimal effluent recirculation of 0.5 to the influent, concentrations of chemical oxygen demand (COD) and total phenol in the effluent could reach as low as 234.0 and 14.2mg/L, respectively. Also, the rate of methane production reached 169.0mLCH4/L/day. Though CGW seemed to restrain the growth of anaerobic microorganisms, especially methanogens, the inhibition was temporary and reversible, and anaerobic bacteria presented strong tolerance. The activities of methanogens cultivated in CGW could quickly recover on feeding with glucose wastewater (GW). However, the adaptability of anaerobic bacteria to the CGW was very poor and the activity of methanogens could not be improved by long-term domestication. By analysis using the Haldane model, it was further confirmed that high effluent recirculation could result in high activity for hydrolytic bacteria and substrate affinity for toxic matters, but only suitable effluent recirculation could result in high methanogenic activity.

Bioaugmentation: An Emerging Strategy of Industrial Wastewater Treatment for Reuse and Discharge

A promising long-term and sustainable solution to the growing scarcity of water worldwide is to recycle and reuse wastewater. In wastewater treatment plants, the biodegradation of contaminants or pollutants by harnessing microorganisms present in activated sludge is one of the most important strategies to remove organic contaminants from wastewater. However, this approach has limitations because many pollutants are not efficiently eliminated. To counterbalance the limitations, bioaugmentation has been developed and consists of adding specific and efficient pollutant-biodegrading microorganisms into a microbial community in an effort to enhance the ability of this microbial community to biodegrade contaminants. This approach has been tested for wastewater cleaning with encouraging results, but failure has also been reported, especially during scale-up. In this review, work on the bioaugmentation in the context of removal of important pollutants from industrial wastewater is summarized, with an emphasis on recalcitrant compounds, and strategies that can be used to improve the efficiency of bioaugmentation are also discussed. This review also initiates a discussion regarding new research areas, such as nanotechnology and quorum sensing, that should be investigated to improve the efficiency of wastewater bioaugmentation.

Influence of phenol on ammonia removal in an intermittent aeration bioreactor treating biologically pretreated coal gasification wastewater

A laboratory-scale intermittent aeration bioreactor was investigated to treat biologically pretreated coal gasification wastewater that was mainly composed of NH3-N and phenol. The results showed that increasing phenol loading had an adverse effect on NH3-N removal; the concentration in effluent at phenol loading of 40mgphenol/(L·day) was 7.3mg/L, 36.3% of that at 200mg phenol/(L·day). The enzyme ammonia monooxygenase showed more sensitivity than hydroxylamine oxidoreductase to the inhibitory effect of phenol, with 32.2% and 10.5% activity inhibition, respectively at 200mg phenol/(L·day). Owing to intermittent aeration conditions, nitritation-type nitrification and simultaneous nitrification and denitrification (SND) were observed, giving a maximum SND efficiency of 30.5%. Additionally, ammonia oxidizing bacteria (AOB) and denitrifying bacteria were the main group identified by fluorescent in situ hybridization. However, their relative abundance represented opposite variations as phenol loading increased, ranging from 30.1% to 17.5% and 7.6% to 18.2% for AOB and denitrifying bacteria, respectively.

Performance and microbial community dynamics in bioaugmented aerated filter reactor treating with coking wastewater

In this study, zeolite-biological aerated filters (Z-BAFs) bioaugmented by free and magnetically immobilized cells of Arthrobacter sp. W1 were designed to treat coking wastewater containing high concentrations of phenol and naphthalene along with carbazole (CA), dibenzofuran (DBF), and dibenzothiophene (DBT). All treatments were carried out for a period of 100days and the data indicated that bioaugmented Z-BAFs with magnetically immobilized cells was most efficient for treating coking wastewaters. Illumina high-throughput sequencing was used to reveal the microbial community structures of Z-BAFs. Both bioaugmentation treatments could accelerate the shift of the bacterial community structures. The introduced strain W1 remained dominant in the bioaugmented Z-BAFs with magnetically immobilized cells, indicating both strain W1 and the indigenous degrading bacteria played the most significant role in the treatment. Overall, bioaugmented Z-BAF with magnetically immobilized cells can be used to efficiently degrade phenol, naphthalene, CA, DBF, and DBT in coking wastewater.

Bioremediation of coking wastewater containing carbazole, dibenzofuran and dibenzothiophene by immobilized naphthalene-cultivated Arthrobacter sp. W1 in magnetic gellan gum

In this study, the cometabolic degradation of carbazole (CA), dibenzofuran (DBF), and dibenzothiophene (DBT) by immobilized Arthrobacter sp. W1 cells pregrown with naphthalene was investigated. Four kinds of polymers were evaluated as immobilization supports for strain W1. After comparison with agar, alginate, and κ-carrageenan, gellan gum was selected as the optimal immobilization support. Furthermore, magnetic Fe₃O₄ nanoparticle was selected as most suitable nanoparticle for immobilization and the optimal concentration was 80 mg/L. The relationship between specific degradation rate and the initial concentration of CA, DBF and DBT was described well by Michaelis-Menten kinetics. The recycling experiments demonstrated that the magnetically immobilized cells coupling with activation zeolite showed highly bioremediation activity on the coking wastewater containing high concentration of phenol, naphthalene, CA, DBF and DBT during seven recycles. Toxicity assessment indicated the treatment of the coking wastewater by magnetically immobilized cells with activation zeolite led to less toxicity than untreated wastewater.

Influence of carrier filling ratio on the performance of moving bed biofilm reactor in treating coking wastewater

This study aims to evaluate the effect of carrier filling ratio on the performance of a moving bed biofilm reactor in degrading chemical oxygen demand, phenol, thiocyanate, and ammonia from coking wastewater at 20h of hydraulic retention time. The operational experiments under different carrier filling ratios ranging from 20% to 60% were investigated. The maximum removal efficiency of 89%, 99% and 99% for COD, phenol and thiocyanate, and minimum sensitivity to the increasing contaminants concentration in the influent were achieved at 50% carrier filling ratio. The Haldane competitive substrate inhibition kinetics model was used to describe the relationship between the oxygen uptake rate of ammonium oxidizers and the concentration of free ammonium. The highest biofilm microbial community functional diversity (Shannon's diversity index, H') and evenness (Shannon's evenness index, E') were obtained at 50% carrier filling ratio in all runs using a Biolog ECO microplate.

Bioremediation of coking wastewater containing carbazole, dibenzofuran, dibenzothiophene and naphthalene by a naphthalene-cultivated Arthrobacter sp. W1

A naphthalene-utilizing bacterium, Arthrobacter sp. W1, was used to investigate the cometabolic degradation of carbazole (CA), dibenzofuran (DBF) and dibenzothiophene (DBT) using naphthalene as the primary substrate. Both the growing and washed cells of strain W1 could degrade CA, DBF, DBT, and naphthalene simultaneously and quickly. Inhibition kinetics confirmed that the presence of CA, DBF and DBT in the growing system would inhibit the cells growth and biodegradability of strain W1. The relationship between ln(C/C0) and time, and specific degradation rate and CA, DBF and DBT concentration could be described well by First-order and Michaelis-Menten kinetics. The treatment of real coking wastewater containing high concentration of phenol, naphthalene, CA, DBF, DBT and NH3-N was shown to be highly efficient by naphthalene-grown W1 coupling with activation zeolite. Toxicity assessment indicated the treatment of the coking wastewater by strain W1 coupling with activation led to less toxicity than untreated wastewater.