Characterization of methane production and microbial community shifts during waste activated sludge degradation in microbial electrolysis cells

Metataxonomic Studies to Evaluate the Beneficial Effect of Enzymatic Pretreatment on the Anaerobic Digestion of Waste Generated in Turkey Farming

Turkey litter waste is lignocellulosic and keratinous, requiring prior enzymatic treatment to facilitate fiber hydrolysis and utilization by microorganisms in anaerobic digestion (AD) process. The understanding of the performance of microorganisms in AD can be facilitated through molecular biology and bioinformatics tools. This study aimed to determine the taxonomic profile and functional prediction of microbial communities in the AD of turkey litter waste subjected to enzymatic pretreatment and correlate it with operational parameters. The tests involved the use of turkey litter (T) at 25 g L-1 of volatile solids, a granular inoculum (S) (10% m/v), and the addition of cellulase (C), and pectinase (P) enzymes at four concentrations. The use of enzymes increased methane production by 19% (turkey litter, inoculum, and cellulase-TSC4) and 15% (turkey litter, inoculum, and enzymatic pectinase-TSP4) compared to the control (turkey litter and inoculum-TS), being more effective in TSC4 (667.52 mLCH4), where there was consumption of acetic, butyric, and propionic acids. The pectinase assay (TSP4) showed a methane production of 648 mLCH4 and there was the accumulation of metabolites. Cellulolytic microorganisms Bacteroides, Ruminofilibacter, Lachnospiraceae, Ruminococcaceae, and Methanosaeta were favored in TSC4. In TSP4, the predominant genus was Macellibacteroides and Methanosarcina, and genes involved in methylotrophic methanogenesis were also found (mtaB, mtmB, and mtbB). Enzymes involved in hydrogenotrophic methanogenesis were identified in both assays (TSC4 and TSP4). Molecular tools helped to understand the metabolic routes involved in AD with enzymatic treatment, allowing the elaboration of strategies to improve the sustainable degradation of turkey litter waste.

Boosting methane production and raw waste activated sludge treatment in a microbial electrolysis cell-anaerobic digestion (MEC-AD) system: The effect of organic loading rate

This study deals with the effect of different organic loading rates (OLRs) on the organic load removal and the productivity of methane, in a microbial electrolysis cell-anaerobic digestion (MEC-AD) system treating raw waste activated sludge (WAS). For comparison, two identical reactors, a control (AD) and a MEC-AD reactor were constructed. Both reactors operated for 131 days, during which different Organic Loading Rates (OLRs) were examined; 1.1, 1.7 and 2.9 gCOD/(L*d). The results showed that the MEC-AD reactor performed better, relative to the AD reactor, at high OLRs. Specifically, the additional total particulate carbon and Kjeldahl nitrogen removal reached 12% and 13%, respectively, at an OLR of 1.7 gCOD/(L*d), while they reached 19% and 13%, respectively, at an OLR of 2.9 gCOD/(L*d). Moreover, the biogas production and the methane content increased by 30% and 6%, respectively, at an OLR of 1.7 gCOD/(L*d) and by 32% and 5%, respectively, at an OLR of 2.9 gCOD/(L*d). The electrochemical measurements indicated that the power output increased from 5 to 30 mW/m2 when the OLR increased from 1.1 to 2.9 gCOD/(L*d). Overall, the results showed that the MEC-AD accelerated and enhanced the WAS treatment, boosting methane productivity.

An Overview of Microbial Fuel Cell Technology for Sustainable Electricity Production

The over-exploitation of fossil fuels and their negative environmental impacts have attracted the attention of researchers worldwide, and efforts have been made to propose alternatives for the production of sustainable and clean energy. One proposed alternative is the implementation of bioelectrochemical systems (BESs), such as microbial fuel cells (MFCs), which are sustainable and environmentally friendly. MFCs are devices that use bacterial activity to break down organic matter while generating sustainable electricity. Furthermore, MFCs can produce bioelectricity from various substrates, including domestic wastewater (DWW), municipal wastewater (MWW), and potato and fruit wastes, reducing environmental contamination and decreasing energy consumption and treatment costs. This review focuses on recent advancements regarding the design, configuration, and operation mode of MFCs, as well as their capacity to produce bioelectricity (e.g., 2203 mW/m2) and fuels (i.e., H2: 438.7 mg/L and CH4: 358.7 mg/L). Furthermore, this review highlights practical applications, challenges, and the life-cycle assessment (LCA) of MFCs. Despite the promising biotechnological development of MFCs, great efforts should be made to implement them in a real-time and commercially viable manner.

Efficient elimination of nonylphenol and 4-tert-octylphenol by weak electrical stimulated anaerobic microbial processes

The investigation into the degradation of alkylphenol pollutants (APs) has become a hotspot due to their harmful effects on the environment and human health. In this study, microbial electrolysis cells (MECs) were used to degrade nonylphenol (NP) and 4-tert-octylphenol (4-tert-OP). The study found that the degradation rates of NP and 4-tert-OP for a 6-day period were 83.6% and 96.3%, respectively, which were 30.53% and 26.7% higher than those of the group without applied voltage. The double layer area in the degradation of 4-tert-OP was larger than that of NP, and the resistance exhibited by 4-tert-OP (87.47 Ω) in MEC was lower than that of NP (99.42 Ω). Meanwhile, NP had a greater effect on the bioenzyme activity than 4-tert-OP. GC-MS analysis showed that the degradation pathways of both pollutants mainly included oxidation and hydroxylation reactions. Furthermore, the microbial community analysis indicated that the main functional bacteria in NP degradation were Citrobacter, Desulfovibrio and Advenella, and those in 4-tert-OP degradation were Stenotrophomonas, Chryseobacterium, Dokdonella, and the key microbiomes underlying the cooperative relationship. The biotoxicity test indicated that the toxicity of residual substances was significantly reduced. Therefore, the MEC system is efficient and environmentally friendly and has broad application prospects in phenol refractory organics.

Power to biogas upgrading: Effects of different H2/CO2 ratios on products and microbial communities in anaerobic fermentation system

Two anaerobic reactors with and without Ca²⁺ were operated at 35 °C to investigate the effects of different H₂/CO₂ ratios on products and microbial communities. Through the investigation of various parameters, it was shown that the change of pH triggered by the variations of H₂/CO₂ is the decisive factor affecting the product selection in anaerobic fermentation system. During the biosynthesis of ATP for cell growth and reproduction, protons (H⁺) were pumped from extracellular to intracellular by proton pump, which caused an increase of intrinsic pH of fermentative system. When the pH below 9.5, the methanogenic pathway was more prevalent. While the pH above 10.0 was conducive to the homoacetogenesis. Microbial community analysis showed that with the changes of H₂/CO₂ ratio, a turnover had occurred. When the ratio of H₂/CO₂ was 4, the main methanogen was Methanobacterium with the dominant interspecies electron transfer bacteria (IETB) of Thermovirga and DMER64. The turnover of microbial community occurred when the H₂/CO₂ ratio was 4.5 and 4.25. The dominant acetogenic microorganisms were norank_o_Clostridia_UCG-014 (homoacetogen) and Natronincola (obligately alkaliphilic acetogen). When the H₂/CO₂ ratio returned to 4, the dominant methanogens were hydrotropic Methanobacterium and Methanobrevibacter with four interspecies electron transfer bacteria including DMER64, Thermovirga, Dechlorobacter and Achromobacter.

How anaerobic sludge microbiome respond to different concentrations of nitrite, nitrate, and ammonium ions: a comparative analysis

High concentrations of ammonium, nitrite, and nitrate always induce inhibition in anaerobic wastewater treatment. Due to the complexity and vulnerability of the microbial community (especially methanogens) in anaerobic sludge, little is understood about its underlying microbial mechanism under such inhibition. In this study, the shifts of microbial communities in anaerobic sludge under increasing levels of nitrite, nitrate, and ammonium ions were compared. Results show that although half maximal inhibitory concentrations (methanogenesis) were different for nitrite, nitrate, and ammonium ions with EC₅₀ values of 12, 30, and 3000 mg N/L, respectively, bacteria genera Kosmotoga and Brooklawnia dominated in all of the three high-stress inhibitory systems. Network analysis and redundancy analysis (RDA) of the microbial community showed the treatments with nitrate and nitrite ions decreased the modularity of anaerobic microorganisms. RDA showed that specific methanogenic activity was positively related to coenzyme F₄₂₀ under nitrite inhibition (r_p = 0.833, p < 0.05) and closely correlated with viability under nitrate inhibition. Gram-positive and nonmotile Brooklawnia genus showed a negative correlation with physiological characteristics in the ammonia treatments, suggesting its high resistance to ammonia.

Promoting the overall energy profit through using the liquid hydrolysate during microwave hydrothermal pretreatment of wheat straw as co-substrate for anaerobic digestion

Liquid hydrolysate (LH) derived from the microwave hydrothermal pretreatment (MHP) of wheat straw (WS) was anaerobically digested together with the solid residual to promote the overall energy profit. Different MHP temperatures (90, 120, 150, 180 °C) and retention times (10, 20, 40 min) were investigated. Increased MHP intensity generated plenty of VFAs (mainly acetate) and phenols in the LH, implying the double-side effect of LH on AD. The highest methane production of 227.92 mL CH₄·gVS^-1 Raw was obtained with MHP at 120 °C for 10 min, 21.53 % higher than the control. While, MHP at 180 °C for 40 min exhibited 29.02 % lower methane production (113.13 mL CH₄·gVS^-1 Raw) and 115.86 % longer lag phase (3.13 days) than the control. Butyrate fermentation endowed the treatment groups of 180 °C with resilience from the overload and inhibition. Methanosarcina was largely enriched by the abundant acetate in LH on the early stage of anaerobic digestion (AD), especially when with high MHP intensity. Increased abundance of Methanosaeta and Methanobacterium played a crucial role in maintaining methane production at the middle and later stage. The high number of species and evenness in methanogens community were beneficial for the startup of batch AD. Although negative net energy was obtained, the lower ratio of energy input and output compared with the most researches using the solid residual after MHP as the sole substrate for AD demonstrated the contribution of LH to the overall energy profit.

Recent advancements in the treatment of palm oil mill effluent (POME) using anaerobic biofilm reactors: Challenges and future perspectives

Palm oil is the most utilized vegetable globally which is mostly produced in countries such as Malaysia, Indonesia and Thailand. The great amount of POME generation from palm oil mills is now a threat to the environment and require a suitable treatment of POME to reduce the organic strength in accordance with the standard discharge limit before releasing to the environment. Currently, the technology to combine the anaerobic process and biofilm system in bioreactors have produced a fresh idea in treatments of high strength wastewater like POME. Anaerobic biofilm reactor is a convincing method for POME treatment due to its significant advantages over the conventional biological treatments consisting of anaerobic, aerobic and facultative pond systems. Overall, integrated anaerobic-aerobic bioreactor (IAAB) can remove more than 99% of chemical oxygen demand (COD), biochemical oxygen demand (BOD) and total suspended solids (TSS) with the combination of anaerobic and aerobic digestion for POME treatment. It has better performance as compared to up-flow anaerobic sludge blanket (UASB) and up-flow anaerobic filter (UAF) with 80% and 88-94% COD removal efficiency respectively. Anaerobic pond was found to perform well also by removing 97.8% of COD in POME but require long retention time and larger land. Hence, this study aims to provide intensive review of the performance of the anaerobic biofilm reactor in treating POME and the recent advancements in this technology. The limitations and future perspectives in utilization of anaerobic biofilm reactor during its operation in treating POME are discussed.

Suppressing Methane Production to Boost High-Purity Hydrogen Production in Microbial Electrolysis Cells

Hydrogen gas (H₂) is an attractive fuel carrier due to its high specific enthalpy; moreover, it is a clean source of energy because in the combustion reaction with oxygen (O₂) it produces water as the only byproduct. The microbial electrolysis cell (MEC) is a promising technology for producing H₂ from simple or complex organics present in wastewater and solid wastes. Methanogens and non-archaeal methane (CH₄)-producing microorganisms (NAMPMs) often grow in the MECs and lead to rapid conversion of produced H₂ to CH₄. Moreover, non-archaeal methane production (NAMP) catalyzed by nitrogenase of photosynthetic bacteria was always overlooked. Thus, suppression of CH₄ production is required to enhance H₂ yield and production rate. This review comprehensively addresses the principles and current state-of-the-art technologies for suppressing methanogenesis and NAMP in MECs. Noteworthy, specific strategies aimed at the inhibition of methanogenic enzymes and nitrogenase could be a more direct approach than physical and chemical strategies for repressing the growth of methanogenic archaea. In-depth studies on the multiomics of CH₄ metabolism can possibly provide insights into sustainable and efficient approaches for suppressing metabolic pathways of methanogenesis and NAMP. The main objective of this review is to highlight key concepts, directions, and challenges related to boosting H₂ generation by suppressing CH₄ production in MECs. Finally, perspectives are briefly outlined to guide and advance the future direction of MECs for production of high-purity H₂ based on genetic and metabolic engineering and on the interspecific interactions.

Enhanced hydrogen production from water hyacinth by a combination of ultrasonic-assisted alkaline pretreatment, dark fermentation, and microbial electrolysis cell

In this study, hydrogen (H₂) production from water hyacinth (WH) was enhanced by the integration of the ultrasonic-assisted alkaline (UAA) pretreatment, dark fermentation (DF), and microbial electrolysis cell (MEC). The results showed that UAA pretreatment improved around 350% in H₂ production in the DF stage and nearly 400% in the whole process compared to un-pretreated. The H₂ yield in the DF stage reached the maximum value of 110.4 mL/g-VS at a WH concentration of 20 g-TS/L. However, high concentrations of co-produced soluble metabolite products (SMPs) and suspended solid in DF effluent adversely affected the efficiency of the MEC stage. Consequently, a WH concentration of 5 g-TS/L was optimal for the UAA-DF-MEC process that achieved the highest H₂ yield of 565.8 mL/g-VS. It suggests that other auxiliary processes (e.g., dilution, centrifugation, effective methanogen inhibition, etc.) need to be developed to further improve the H₂ production from WH via the UAA-DF-MEC process.

Effect of Electrolysis on Activated Sludge during the Hydrolysis and Acidogenesis Stages in the Anaerobic Digestion of Poultry Manure

This paper focuses on the study of the effect of electrolysis on activated sludge in a microbial electrolysis cell (MEC) under the anaerobic digestion of poultry manure. This study was conducted using a bioreactor design with and without electrodes (conventional condition). Measurements of pH, redox potential (ORP), and total dissolved solids were carried out, as was the microscopy of activated sludge during treatment and gasometry. There was an increase in the yields of CH4 and CO2 compared to conventional conditions. Thus, on the 14th day, there was an increase in the CH4 yield to 35.1% compared with the conventional conditions—31.6%—as well as in the CO2 yield to 53.5% compared with the cell without electrodes—37.7%. Visually, the microscopy of anaerobic activated sludge showed changes in the aggregation process itself, with the formation of cells of clusters of microorganism colonies with branches of a delineated shape. ORP fluctuations were related to the process of the dissociation into ions during the passage of an electric current through the electrodes, and were observed before and after the inclusion of a current into the system. A model of the effect of electrolysis during anaerobic digestion was developed, taking into account the influencing factors on the condition of the activated sludge.

Enhancement of methane production from waste activated sludge using hybrid microbial electrolysis cells-anaerobic digestion (MEC-AD) process - A review

Hybrid microbial electrolysis cells-anaerobic digestion (MEC-AD) was proved to increase methane productivity and methane yield of waste activated sludge (WAS) by establishing direct interspecies electron transfer method and enriching functional microorganisms. This review first summarized the pretreatment methods of WAS for MEC-AD and then reviewed the reactor configurations, operation parameters, and the economic benefit of MEC-AD. Furthermore, the enhancement mechanisms of MEC-AD were reviewed based on the analysis of thermodynamics and microbial community. It was found that the decrease of hydrogen partial pressure due to the hydrogenotrophic methanogens enriched in cathodic biofilm and direct interspecies electron transfer between exoelectrogens and anode were the core mechanisms for improving acidogenesis, acetogenesis, and methanogenesis. Finally, the potentially technological issues that need to be addressed to increase energy efficiency in large-scale MEC-AD processes were discussed.

Effect of sodium dodecylbenzene sulfonate on hydrogen production from dark fermentation of waste activated sludge

Sodium dodecylbenzene sulfonate (SDBS), a typical surfactant being widely used in various applications, was highly accumulated in waste activated sludge. To date, however, its effect on hydrogen production from dark fermentation of sludge has not been documented. The work therefore aimed to explore whether and how SDBS affects hydrogen production. Experimental results showed that with an increase of SDBS from 0 to 30 mg/g TSS, the maximal hydrogen yield increased from 2.47 to 10.73 mL/g VSS (without any treatment) and from 13.05 to 23.51 mL/g VSS (under free ammonia pretreatment). Mechanism exploration showed that SDBS lowered surface tension, facilitated organics transfer from solid to liquid. SDBS also destroyed hydrogen bonding networks of protein, promoted macromolecular organics degradation. Besides, SDBS improved the electric charge in organics, then weakened the mutual repulsion, improved adsorb, interact and promoted the availability of reaction sites between anaerobes and organic substances. Enzyme activity analysis showed that SDBS not only improved the activities of enzymes related to hydrolysis and acidification processes, but also inhibited the activities of homoacetogens and methanogens. SDBS presence lowered sludge ORP and created an environment which was helpful to the growth of butyric-type bacteria, thus enhanced butyric-type fermentation, which contributed hydrogen production largely. Microbial community analysis revealed that SDBS existence affected distributions of microbial populations, and increased the abundances of hydrogen producing microorganisms (e.g., unclassified_f_Synergistaceae). PICRUSt2 analysis showed that SDBS reduced hydrogenotrophic methanogens activity for its inhibitory effect on the biotransformation of 5,10-Methenyl-THMPT to 5-methyl-THMPT.

Emerging bioelectrochemical technologies for biogas production and upgrading in cascading circular bioenergy systems

Biomethane is suggested as an advanced biofuel for the hard-to-abate sectors such as heavy transport. However, future systems that optimize the resource and production of biomethane have yet to be definitively defined. This paper assesses the opportunity of integrating anaerobic digestion (AD) with three emerging bioelectrochemical technologies in a circular cascading bioeconomy, including for power-to-gas AD (P2G-AD), microbial electrolysis cell AD (MEC-AD), and AD microbial electrosynthesis (AD-MES). The mass and energy flow of the three bioelectrochemical systems are compared with the conventional AD amine scrubber system depending on the availability of renewable electricity. An energy balance assessment indicates that P2G-AD, MEC-AD, and AD-MES circular cascading bioelectrochemical systems gain positive energy outputs by using electricity that would have been curtailed or constrained (equivalent to a primary energy factor of zero). This analysis of technological innovation, aids in the design of future cascading circular biosystems to produce sustainable advanced biofuels.

Alkaline thermal pretreatment of waste activated sludge for enhanced hydrogen production in microbial electrolysis cells

Resource utilization of waste activated sludge (WAS) has become a mainstream development direction. Alkaline thermal pretreatment (TPT) was found to greatly promote the bioaccessibility and biodegradability of the sludge. The organic matter including soluble chemical oxygen demand (SCOD), soluble carbohydrate, soluble protein and volatile fatty acids (VFAs) after low temperature (90 °C) pretreatment was 4.8%-65.9% higher than that after high temperature (180 °C) pretreatment. These increasements could be contributed by the alkaline treatment condition and the longer treatment time. The alkaline condition reduced the resistance of cell wall to the temperature. The pretreatment time at 90 °C was two times of that at 180 °C, allowing more organic matter to be released. But the total energy consumption of low temperature pretreatment (2580.7 kJ/L) was 30.5% lower than that of high temperature pretreatment (3711.8 kJ/L). The sludge fermentation liquid (SFL) was then employed as the substrate in microbial electrolysis cells (MECs), and the utilization efficiency of acetic acid was the highest (74.9%-83.2%). The hydrogen yield using low temperature pretreated sludge was 0.44 m³/(m³·d), which was higher than that of using high temperature pretreated sludge (0.31 m³/(m³·d)). These results suggested that alkaline TPT at 90 °C was an effective way to hydrolyze sludge and further enhance hydrogen production in MECs.

The underlying mechanism of enhanced methane production using microbial electrolysis cell assisted anaerobic digestion (MEC-AD) of proteins

Anaerobic digestion (AD) is a promising technology capable of converting waste matter into bio-energy. Recent studies have reported that microbial electrolysis cell assisted anaerobic digestion (MEC-AD) is an effective system for methane production from organic waste, via enhanced electron transfer. However, little is known about the effects of applied voltage on the AD of proteins. Herein, the mechanism of MEC-AD on protein digestion was investigated using varying concentrations of bovine serum albumin (BSA) as the protein substrate (500 mg/L, 4 g/L, and 20 g/L BSA). Experimental results showed that the applied voltage can not only enhance the methane production rate from 23.8% to 45.6% at low and medium organic loading (BSA concentration of 500 mg/L and 4 g/L), but also improve the methanogenesis efficiency increased by 225.4% at high BSA concentration (20 g/L) with the applied voltage of 0.6 V compared to that with open circuit. Mechanism explorations revealed that the applied voltage significantly enhanced the acidogenesis and methanogenesis processes in the AD of proteins. Microbial community characterization showed that with the applied voltage, the abundance of fermentative bacteria increased by 46.7 % at the anode, while, the abundance of Methanobacterium at the cathode increased from 10.4 to 84.3%, indicating the methanogenesis pathway transformed from acetoclastic to hydrogenotrophic. External circuit electron transfer calculations demonstrated that only 10% of the produced methane could be attributed to direct interspecies electron transfer (DIET). From a thermodynamic perspective, the applied external voltage led to a reduction in the cathodic potential to -0.9 V, which is beneficial for enhanced methane production via mediated interspecies electron transfer (MIET) by enrichment of hydrogenotrophic methanogens. The findings reported here reveal the previously unrecognized contribution of proteins to MEC-AD, while also furthering our understanding of the role of applied voltage in the MEC-AD process.

Damage of anodic biofilms by high salinity deteriorates PAHs degradation in single-chamber microbial electrolysis cell reactor

The anaerobic biodegradation of polycyclic aromatic hydrocarbons (PAHs) in high salinity wastewater is rather hard due to the inhibition of microorganisms by complex and high dosage of salts. Microbial electrolysis cell (MEC), with its excellent characteristic of anodic biofilms, can be an effective way to enhance the PAHs biodegradation. This work evaluated the impact of NaCl concentrations (0 g/L, 10 g/L, 30 g/L, and 60 g/L) on naphthalene biodegradation and analyzed the damage protection mechanism of anodic biofilms in batching MECs. Compared with the open circuit, the degradation efficiency of naphthalene under the closed circuit with 10 g/L NaCl concentration reached the maximum of 95.17% within 5 days. Even when NaCl concentration reached 60 g/L, the degradation efficiency only decreased by 10.02%, compared with the MEC without additional NaCl. Confocal scanning laser microscope (CSLM) proved the superiority of the biofilm states of MEC anode under high salinity in terms of thicker biofilms and higher proportion of live/dead bacteria cells. The highest dehydrogenase activity (DHA) was found in the MEC with 10 g/L NaCl concentration. Moreover, microbial diversity analysis demonstrated the classical electroactive microorganisms Geobacter and Pseudomonas were found on the anodic biofilms of MECs, which have both PAHs degradability and the electrochemical activity. Therefore, this study proved that high salinity had adverse effects on the anodic biofilms, but MEC alleviated the damage caused by high salinity.

An innovative cation regulation-based anaerobic fermentation strategy for enhancing short-chain fatty acids production from waste activated sludge: Metal ion removal coupled with Na+-regulation

This study proposed a cation-regulation strategy based on metal ion removal coupled Na⁺-regulation for enhancing anaerobic fermentation of waste activated sludge. The optimal treatment condition was: cation-exchange resin dosage of 1.75 g/g SS for 1-day treatment, followed by Na⁺-enhanced anaerobic fermentation at NaCl concentration of 20 g/L. The CER induced sludge solubilization and the Na⁺-regulation treatment triggered secondary hydrolysis of CER-solubilized sludge, causing remarkable sludge disintegration and extracellular polymeric substance (EPS) disruption. Numerous SCOD of 6588 mg/L (SCOD/TCOD = 40.6%) was released within 2 days, and the short-chain fatty acids (SCFAs) of 439.9 mg COD/g VSS was produced through 4-day anaerobic fermentation. More than 59% of the SCFAs was composed of acetate and propionate. Nitrogen-free organic matters (i.e. SCFAs and carbohydrates) accounted for 77.9% of SCOD, while considerable sludge solid reduction (51.6% of total VSS) was achievable, which was beneficial for fermentative liquid utilization and sludge disposal.

Archaeal and bacterial community structures of rural household biogas digesters with different raw materials in Qinghai Plateau

The present study aims to investigate microbial community structures household biogas digesters with different raw materials in Qinghai Plateau rural. High-throughput 16S rRNA gene sequencing analysis revealed that Firmicutes, Bacteroidetes, and Proteobacteria are the most abundant bacterial phyla (64.08%). Prevotella group 7 was the most abundant genus in digester YL9 and YL10 (69.72% and 26.96%, respectively) using vegetable waste raw materials. Trichococcus exhibited the highest abundance (14.55%) in YL1 digester using sheep and pig manure. Clostridium sensu stricto 1 (13.89%) and Synergistaceae_uncultured (15.52%) comprised the highest abundances in digester YL5 with mixed raw materials (i.e., dairy manure, sheep manure, and human feces). In addition, Proteiniphilum and Pseudomonas exhibited the highest abundances among bacterial genera in YL4 digester using pig manure. Methanomicrobiales was the most dominant archaeal communities, ranging from 13.35% to 81.34% in abundance. Methanocorpusculum exhibited dominant abundances in all digesters using various raw materials. Methanogenium was the most abundant archaeal genera in YL4 and YL6 digesters, which consume pig manure as primary raw material. In addition, Methanosarcina and Methanosaeta exhibited the highest abundances in digester YL1 (55.03%) and YL9 (51.40%), respectively. Moreover, fermentation temperatures and pH both contributed to the archaeal and bacterial community structures in all the investigated digesters. Specially, fermentation temperature showed positive correlation with the abundances of Synergistaceae_uncultured, Methanogenium, and Methanosaeta, and pH was positively correlated with the abundances of Prevotella group 7 and Methanosarcina abundances.

Emerging trends in microbial fuel cell diversification-Critical analysis

Global need for transformation from fossil-based to bio-based economy is constantly emerging for the production of low-carbon/renewable energy/products. Microbial fuel cell (MFC) catalysed by bio-electrochemical process gained significant attention initially for its unique potential to generate energy. Diversification of MFC is an emerging trend in the context of prioritising/enhancing product output while exploring the mechanism specificity of individual processes. Bioelectrochemical treatment system (BET), microbial electrosynthesis system (MES), bioelectrochemical system (BES), electro-fermentation (EF), microbial desalination cell (MDC), microbial electrolysis cell (MEC) and electro-methanogenesis (EM) are the diversified MFC systems that are being researched actively. Owing to its broad diversification, MFC domain is increasing its potential credibility as a platform technology. Microbial catalyzed electrochemical reactions are the key which directly/indirectly are proportionally linked to electrometabolic activity of microorganisms towards final anticipated output. This review intends to holistically document the mechanisms, applications and current trends of MFC diversifications towards multi-faced applications.

Efficiency and key functional genera responsible for simultaneous methanation and bioelectricity generation within a continuous stirred microbial electrolysis cell (CSMEC) treating food waste

This study reveals the efficient treatment of high strength food waste under varying hydraulic retention times (48 h, 36 h and 24 h) in a continuous stirred tank reactor (CSTR) integrated with microbial electrolysis cell (MEC) to become a continuous stirred microbial electrolysis cell (CSMEC). COD removal efficiency in the CSMEC surpassed 92% with OLR ranging from 0.4 to 21.31 kg COD/m³·d compared to that of the CSTR. The maximum current density (based on the cathode surface area) was 1125.35 ± 81 mA/m² in the CSMEC. Biogas yield and methane production rates increased by 16.5% and 19.3% in the CSMEC respectively compared to the CSTR. CSMEC was 1.52 times better in performance compared to the CSTR. Firmicutes, Synergistetes, Bacteroidetes, Thermotogae, Chloroflexi and Proteobacteria were the dominant phyla associated with both CSMEC and CSTR. Archaeal microbial community analysis showed Methanosaeta, Methanobacterium, Methanosarcina and Methanocorpusculum as the dominant populations associated with the CSMEC.

Bioelectrical Methane Production with an Ammonium Oxidative Reaction under the No Organic Substance Condition

The present study investigated bioelectrical methane production from CO₂ without organic substances. Even though microbial methane production has been reported at relatively high electric voltages, the amount of voltage required and the organisms contributing to the process currently remain unknown. Methane production using a biocathode was investigated in a microbial electrolysis cell coupled with an NH₄⁺ oxidative reaction at an anode coated with platinum powder under a wide range of applied voltages and anaerobic conditions. A microbial community analysis revealed that methane production simultaneously occurred with biological denitrification at the biocathode. During denitrification, NO₃^– was produced by chemical NH₄⁺ oxidation at the anode and was provided to the biocathode chamber. H₂ was produced at the biocathode by the hydrogen-producing bacteria Petrimonas through the acceptance of electrons and protons. The H₂ produced was biologically consumed by hydrogenotrophic methanogens of Methanobacterium and Methanobrevibacter with CO₂ uptake and by hydrogenotrophic denitrifiers of Azonexus. This microbial community suggests that methane is indirectly produced without the use of electrons by methanogens. Furthermore, bioelectrical methane production occurred under experimental conditions even at a very low voltage of 0.05‍ ‍V coupled with NH₄⁺ oxidation, which was thermodynamically feasible.

Effect of NaCl Concentration on Microbiological Properties in NaCl Assistant Anaerobic Fermentation: Hydrolase Activity and Microbial Community Distribution

Previous studies have demonstrated that sludge hydrolysis and short-chain fatty acids (SCFAs) production were improved through NaCl assistant anaerobic fermentation. However, the effect of NaCl concentrations on hydrolase activity and microbial community structure was rarely reported. In this study, it was found that α-glucosidase activity and some carbohydrate-degrading bacteria were inhibited in NaCl tests, owing to their vulnerability to high NaCl concentration. Correspondingly, the microbial community richness and diversity were reduced compared with the control test, while the evenness was not affected by NaCl concentration. By contrast, the protease activity was increased in the presence of NaCl and reached the highest activity at the NaCl concentration of 20 g/L. The protein-degrading and SCFAs-producing bacteria (e.g., Clostridium algidicarnis and Proteiniclasticum) were enriched in the presence of NaCl, which were salt-tolerant.

Cation-exchange resin regeneration waste liquid as alternative NaCl source for enhancing anaerobic fermentation of waste activated sludge: Compositions of dissolved organic matters and chemical conditioning performance

This study reported the NaCl-enhanced anaerobic fermentation with cation-exchange resin regeneration waste liquid (CRWL) as alternative NaCl source for waste activated sludge (WAS) disposal and carbon recovery. Through 4-day CRWL-enhanced anaerobic fermentation at Na⁺ concentration of 0.34 mol/L, the Na⁺-caused sludge disintegration triggered numerous release of dissolved organic matters (DOMs), i.e. 371.6 mg/g VSS, with composition distribution: acetic acid (28.2%) > butyric acid (16.1%) ≈ valeric acid (17.8%) ≈ proteins (16.4%) > propionic acid (14.4%) > unknown (3.2%) > carbohydrates (3.9%). Satisfying chemical conditioning performance for the fermented sludge was observed at the FeCl₃ dosage of 0.3 g/g DS, attributing to the roles of double-layer compression and electric neutralization. The capillary suction time (CST) and sludge cake moisture content were decreased to 60.3 s and 75.1%, against those of 607 s and 93.5% before conditioning, respectively. Such "treating waste by waste" strategy could provide numerous environmental and economic benefits.

A Comprehensive Understanding of Electro-Fermentation

Electro-fermentation (EF) is an upcoming technology that can control the metabolism of exoelectrogenic bacteria (i.e., bacteria that transfer electrons using an extracellular mechanism). The fermenter consists of electrodes that act as sink and source for the production and movement of electrons and protons, thus generating electricity and producing valuable products. The conventional process of fermentation has several drawbacks that restrict their application and economic viability. Additionally, metabolic reactions taking place in traditional fermenters are often redox imbalanced. Almost all metabolic pathways and microbial strains have been studied, and EF can electrochemically control this. The process of EF can be used to optimize metabolic processes taking place in the fermenter by controlling the redox and pH imbalances and by stimulating carbon chain elongation or breakdown to improve the overall biomass yield and support the production of a specific product. This review briefly discusses microbe-electrode interactions, electro-fermenter designs, mixed-culture EF, and pure culture EF in industrial applications, electro methanogenesis, and the various products that could be hence generated using this process.

Enhanced anaerobic fermentation of waste activated sludge by NaCl assistant hydrolysis strategy: Improved bio-production of short-chain fatty acids and feasibility of NaCl reuse

This study developed an economical approach for enhancing short-chain fatty acids (SCFAs) production from waste activated sludge (WAS) by NaCl assistant anaerobic fermentation. With NaCl addition at 20 g/L, sludge disintegration with extracellular polymeric substance (EPS) disruption and cell lysis were induced owing to the attack of osmotic pressure, which facilitated WAS solubilization with release of biodegradable organic matters. The SCOD sharply increased to 4092 mg/L (SCOD/TCOD = 23.9%) after 2-day hydrolysis, against 1462 mg/L in the control. After 4-day anaerobic fermentation, considerable SCFAs production of 288.2 mg COD/g VSS was achievable. More than 60% of the SCFAs was composed of acetic and propionic acids. The feasibility of bio-electrogenesis in microbial fuel cell (MFC) utilizing fermentative liquid was assessed. As such, the produced SCFAs could be consumed with energy recovery, thereby the used NaCl was reusable, which created environmental and economic benefits, e.g. reduced NaCl consumption and cost, negligible residual NaCl.

Rapid degradation of 2,4-dichloronitrobenzene in single-chamber microbial electrolysis cell with pre-acclimated bioanode: A comprehensive assessment

2,4-dichloronitrobenzene (DClNB) as a typical refractory pollutant, exists in multifarious industrial wastewater widely and poses a serious threat to the environment. An ion exchange membrane (IEM)-free microbial electrolysis cell (MEC) with pre-acclimated bioanode was built and evaluated systematically for treatment of DClNB containing wastewater. Results showed that compared with the non-acclimated or IEM-equipped MECs, the pre-acclimated IEM-free MECs had the best DClNB removal efficiency of 91.3% under COD and DClNB loading rates of nearly 1000 kg m^-3 d^-1 and 100 g m^-3 d^-1. Both of anode pre-acclimation and IEM removal reduced the electron transfer resistance by 71.1 and 194.5 Ω, respectively. Compared to the pre-acclimated IEM-equipped MEC, the cathode current efficiency of pre-acclimated IEM-free MEC increased by 13.7%. Analysis of live/dead cell staining indicated that a higher proportion of live cells was observed in the acclimated anode biofilm (66.1% vs. 47.3%), and the detoxification of DClNB in the pre-acclimated IEM-free MECs was significantly better (p < 0.05) than those of non-acclimated or IEM-equipped MECs. This study contributes to the performance improvement of the MEC process for treatment of toxic industrial wastewater.

Improved Simultaneous Decolorization and Power Generation in a Microbial Fuel Cell with the Sponge Anode Modified by Polyaniline and Chitosan

In recent years, microbial fuel cell (MFC) has been regarded as a promising technology for dye wastewater treatment. Compared with traditional anaerobic reactors, MFC has better decolorization effect while producing electricity simultaneously. In this paper, a double-chamber MFC with the sponge anode modified by polyaniline and chitosan-NCNTs was employed for simultaneous azo dye decolorization and bioelectricity generation. The influence of dye concentration, co-substrate concentration, and operating temperature on the performance of MFC with the modified anodes were studied. The results showed that a high decolorization efficiency (98.41%) and maximum power density (2816.67 mW m^-3) of MFC equipped with modified bioanodes were achieved due to the biocompatibility and bioelectrocatalysis of modified material. And the biomass on the modified anode's surface was increased by 1.47 times. Additionally, microbial community analysis revealed that the modification of polyaniline and chitosan-NCNTs improved the selective enrichment of specific communities and the main microorganism was the electroactive and decolorizing bacteria Enterobacter (62.84%). Therefore, the composite anode is capable of fully utilizing the synergistic role of various materials, leading to superior performance of dye decolorization in MFCs. This work provided a strategy for the research on the recovery of biomass energy and decolorization in wastewater treatment. Graphical Abstract.

Bioelectrochemical Methane Production from Food Waste in Anaerobic Digestion Using a Carbon-Modified Copper Foam Electrode

Anaerobic bioelectrochemical digestion (ABD) is widely used for treating wastewater and recovering energy. The electrode is the key point for ABD system, which was sparsely studied with food waste. In this study, a carbon-modified copper foam was fabricated with copper foam and multiple wall carbon nanotubes (MWCNT) through electrophoretic deposition and screen-printing methods. The carbon-modified copper foam electrode was investigated in an ABD reactor for food waste. The features of bioelectrochemical methane production, process stability, and electrochemical characterization were evaluated in the ABD reactor, and were compared to the control reactor without equipping electrode. The ultimate methane production reached 338.1 mL CH4/L in the ABD reactor, which was significantly higher than the 181.0 mL CH4/L of the control reactor. The methane produced from the electrode was 137.8 mL CH4/L, which was up to 40.8% of total methane production in the ABD reactor. It was attributed to the electroactive bacteria that were enriched and activated by the carbon-modified copper foam electrode, further activating the direct interspecies electron transfer (DIET) pathways for methane production. The cyclic voltammetry (CV) analysis showed higher redox peaks, which is one of the pieces of evidence for the enrichment of electroactive bacteria. The carbon-modified copper foam electrode has the advantages of both carbon and metal materials, and demonstrated a high possibility for use in bioelectrochemical methane production for food waste.

Performance and microbial community variations of a upflow anaerobic sludge blanket (UASB) reactor for treating monosodium glutamate wastewater: Effects of organic loading rate

To investigate the effect of the organic loading rate (OLR) on anaerobic treatment of monosodium glutamate (MSG) wastewater, a lab-scale up-flow anaerobic blanket (UASB) reactor was continuously operated over a 222-day period. The overall performances of COD removal and methane recovery initially exhibited an increase and subsequently decreased when the OLR was increased from 1 g-COD/L/d to 24 g-COD/L/d. At the optimal OLR of 8 g-COD/L/d, superior performance was obtained with a maximum COD removal efficiency of 97%, a methane production rate of 2.3 L/L/d, and specific methanogenic activity of 86 mg-CH₄/g-VSS/d (feeding on glutamate), with superior characteristics of sludge in VSS concentration, average diameter of granules, and settling velocity. According to the results of the specific methanogenic activity, the methanogenic pathway was more inclined to pass through acetate than through hydrogen. Methanosarcina instead of Methanosaeta, with Methanobacterium and greatly increased Firmicutes, dominated in the UASB reactor after long term operation. These results support that the OLR had a substantial effect on both the treatment and energy recovery efficiency of MSG wastewater as well as on microbial community variations in the UASB reactor.

The effect of temperature fluctuation on the microbial diversity and community structure of rural household biogas digesters at Qinghai Plateau

Seasonal temperature-fluctuation has been regarded as a key environmental factor affecting rural biogas fermentation yields. The present study investigated the impact of seasonal temperature-fluctuation on operating-temperatures and biogas production in rural household digesters at Qinghai Plateau and revealed the related changes in microbial diversity and community structure by 16S rRNA gene high-throughput sequencing (HTS) analysis. Our results showed closely positive correlation between operating-temperatures and biogas production. HTS analysis indicated the highest diversity for bacteria community in autumn (at highest operating-temperatures) and late winter (at lowest operating-temperatures) and for archaea community only in autumn. HTS analysis classified bacteria into 21 phyla and 346 genera with the most predominant phyla Firmicutes, Bacteroidetes and Proteobacteria (> 72.4% in total) and the most predominant genera Proteiniphilum, Clostridium sensustricto 1, Petrimonas, Pseudomonas and Fastidiosipila (37.09-38.61% in total). HTS analysis also revealed two main archaea orders (Methanomicrobiales and Methanobacteriales) and one predominant genus Methanogenium to support plateau biogas fermentation. Especially, a remarkable impact of temperature on the community abundances of bacteria phyla Synergistetes and archaea genera Methanogenium and Thermogymnomonas was observed, and such microbial community structure changes were positively consistent with the biogas production. The present work provided the first set of evidences to link temperature-controlled modulation of microbial community structure with rural household biogas production at Qinghai Plateau.

The microbial zonation of SRB and soNRB enhanced the performance of SR-DSR process under the micro-aerobic condition

The micro-aerobic condition has proven to effectively enhance the COD removal and elemental sulfur (S⁰) transformation rate in the sulfate reduction-denitrifying sulfide removal (SR-DSR) process. However, the mechanisms of how micro-aerobic condition enhances S⁰ transformation remain largely unknown. Therefore in this work an integrated investigation was performed to document the mechanisms and the effect of different startup modes (micro-aerobic startup (termed as mSR-DSR) and anaerobic startup (termed as aSR-DSR)) on bioreactor performance and microbial community dynamics. The results showed that micro-aerobic startup achieved a shorter period to reach a stable performance for SR-DSR, which could be one of the factors affecting the choice of the bioreactor startup mode considering engineering application. For all the tested conditions, removal of nitrate, sulfate and lactate were 100%, >80% and 100%, respectively. The maximum transformation rate of elemental sulfur in mSR-DSR was 57%, which was higher than that in aSR-DSR. The mechanism explorations revealed that micro-aerobic condition not only particularly enriched the sulfide-oxidizing, nitrate-reducing bacteria (soNRB) but also promoted the microbial zonation of sulfate-reducing bacteria (SRB) and soNRB, thereby achieving more S⁰ transformation in the effluent. Under micro-aerobic condition, SRB were mainly distributed in the bottom and middle part of the reactor, while soNRB were assembled in the top. The relative abundance of soNRB in both aSR-DSR and mSR-DSR notably increased to 41.5% and 23.7% at the top when 5 mL air min^-1 L_reactor^-1 was applied. Furthermore, the degradation of organic carbon was also accelerated under micro-aerobic condition, possibly due to the enrichment of organic compounds degrading bacteria Bacteroidetes_vadin HA17.

Enhancing anaerobic degradation of phenol to methane via solubilizing Fe(III) oxides for dissimilatory iron reduction with organic chelates

The improved performances during anaerobic degradation of phenol to methane with Fe(OH)₃ were usually inapparent, due to its lower solubility (unaccessible to dissimilatory iron reduction) and more positive reduction potential of Fe(III)/Fe(II) (unfavorable for enriching Fe(III)-reducing bacteria [IRBs]). In this study, citrate, the organic chelates, were used to solubilize Fe(III) with the aim of improving the phenol degradation and declining the reduction potential of Fe(III)/Fe(II). Results showed that, in the co-occurrence of citrate and Fe(OH)₃, the degradation rates of phenol were about 1.3-fold rapider than that with sole Fe(OH)₃. Analysis of cyclic voltammetry demonstrated that the reduction potential of Fe(III)/Fe(II) in the form of Fe(OH)₃ (-0.41 to -0.28 V vs Ag/AgCl) declined to -0.61 to -0.41 V. As a result, the Fe(III)-reducing genera, such as Petrimonas and Shewanella, which held a great potential of proceeding syntrophic metabolism via direct interspecies electron transfer (DIET), were significantly enriched.

Optimization of operating conditions of miniaturize single chambered microbial fuel cell using NiWO4/graphene oxide modified anode for performance improvement and microbial communities dynamics

NiWO₄ and graphene oxide (NWG) modified anodic carbon cloth (CC) is used to improve the performance of single chambered microbial fuel cell (SMFC) by statistical optimization of operational parameters. The properties of synthesized NWG nanocomposite on the surface of modified anode are characterized by FTIR, XRD, EDX, TEM and SEM analysis. The optimum level of operational parameters maximize the power density (PD) 1458 mW/m² of SMFC having NWG modified anode and observed 8.5 fold improvements with respect to control. The electrochemical activities of the modified/un-modified anode in SMFC are determined by CV, PD, polarization curves and EIS. Significant improvement occurs in electron transfer between the microbes and modified anode due to internal resistance reduction and better biocompatible surface observed by EIS and microbial analysis results. The 10 miniaturize SMFCs in series, parallel and series-parallel connections produced 7, 31 and 18% higher PD in comparison with a medium size SMFC, respectively.

Catalytic pyrolysis coupling to enhanced dewatering of waste activated sludge using KMnO4Fe(II) conditioning for preparing multi-functional material to treat groundwater containing combined pollutants

Sewage sludge, the major by-product during the primary treatment and subsequent biotreatment of wastewater, is increasingly generated around the world. KMnO₄Fe(II) consists both oxidation properties of KMnO₄ and flocculation ability by in-situ formed Fe(III) and is widely used in water treatment. In this study, KMnO₄Fe(II) was used as chemical conditioners to synchronously improve sludge dewatering performance and catalyze the biomass pyrolysis of waste activated sludge for preparing multi-functional material to remedy arsenic containing groundwater. The results showed that the sludge dewaterability was significantly improved due to the moderate pre-oxidation of extracellular polymeric substances by KMnO₄, and then the sludge particles were re-flocculated by Fe(III) generated from KMnO₄Fe(II). The conditioned sludge cake was then utilized for preparing sludge-based carbon (Fe-Mn-SBC) which was systematically characterized. The surface area of Fe-Mn-SBC was characteristic of high surface area (100.08 m²/g) which had a great adsorption capacity on arsenic. Besides, Fe-Mn-SBC could effectively oxidize As(III) to As(V), and addition of low dose of H₂O₂ can further improve total arsenic removal due to catalytic peroxidation of Fe-Mn-SBC. Besides, it was found that the presence of humic acid could inhibit the hydroxy iron formation and compete for the active adsorption sites and then resulted in the decrease in arsenic removal, and the co-existing humic acid could also be removed by adsorption of Fe-Mn-SBC. This work proposed a novel sludge treatment process by combining enhanced sludge dewatering with catalytic pyrolysis for preparing multi-functional materials, and they are promising in treatment of water containing combined pollutants.

Mechanisms of peroxymonosulfate pretreatment enhancing production of short-chain fatty acids from waste activated sludge

Peroxymonosulfate (PMS) has been recently used as an additive to pretreat waste activated sludge (WAS) to enhance short-chain fatty acids (SCFAs) production. However, the mechanisms of how PMS enhances SCFAs production remain largely unknown. This work therefore aims to explore the mechanisms through deeply understanding its impact on the disintegration of sludge cells, the biodegradability of organics released and the bioprocesses involved in anaerobic fermentation, and differentiating the contributions of its degradation intermediates to SCFAs production. This was demonstrated by a series of batch fermentation tests using either real sludge or model organic compounds as fermentation substrates. Experimental results showed that the maximal SCFAs yield increased from 29.69 to 311.67 mg COD/g VSS with PMS level increasing from 0 to 0.09 g/g TSS. No obvious increase in SCFAs yield was observed when PMS further increased. The mechanism explorations revealed that PMS pretreatment not only enhanced the disintegration of sludge cells but also promoted the biodegradability of organics released, thereby providing more biodegradable substrates for subsequent SCFAs production. PMS pretreatment decreased the percentages of fulvic acid-like and humic acid-like substances in the released organics. Moreover, the species and total detection frequency of other recalcitrant organics such as cyclopentasiloxane, heptasiloxane, and ethylene glycol, which were hardly degraded in ordinary anaerobic condition, also decreased remarkably. Although PMS caused harms to some extents to all the microbes in the anaerobic fermentation, its inhibitions to SCFAs consumers were much severer than that to SCFAs producers, probably due to the less tolerance of methanogens. Further analyses exhibited that ¹O₂, SO₄^•- and •OH were the major contributors to the increased SCFAs production, and their contributions were in the order of ¹O₂ > SO₄^•- > •OH. The findings obtained in this work provide insights into PMS-involved sludge fermentation process and might have important implication for further manipulation of WAS treatment in the future.

Response of environmental variables and microbial community to sodium percarbonate addition to contaminated sediment

Sodium percarbonate (SPC) is a common reagent used for in situ remediation of contaminated soil. Current studies focus on the effects of SPC on pollutant removal; however, a knowledge gap exists for the biochemical process following SPC addition. In this study, a microcosm batch experiment was conducted to investigate the residual effect caused by different doses of SPC addition on native microbial communities, as well as on the environmental variables of contaminated sediments. The obtained results showed that the more SPC was added, the more dissolved matters were generated and the oxidation-reduction potential was lowered. Furthermore, the metabolic activities of the microbial community were enhanced and the microbial community structure responded differently to different SPC doses: the microbes that increased at high SPC dose mainly belonged to the phylum Firmicutes, the class Clostridia, and the genera Petrimonas and Proteiniclasticum. The microbes that increased at medium SPC dose mainly belonged to the class Alphaproteobacteria and the genus Brevundimonas. In contrast, vulnerable microbes mainly belonged to the phylum Acidobacteria, the class Caldisericia, Holophagae, and the genus Sulfuricurvum. Microbes capable of fermentation, ureolysis, and chemohetrotrophy increased. These results indicate that SPC addition could indirectly provide both electron acceptors and donors, thus improving the metabolic activities of the microorganisms in the contaminated sediment. Furthermore, the utilized SPC dose should be considered to achieve the optimal benefit for in situ remediation. This study forms a valuable reference for the application of SPC in ecological engineering.

Oriented acidification of wasted activated sludge (WAS) focused on odd-carbon volatile fatty acid (VFA): Regulation strategy and microbial community dynamics

As the main intermediate metabolite in anaerobic digestion of wasted activated sludge (WAS), volatile fatty acids (VFAs) are proper substrate for mixed culture (MC) polyhydroxyalkanoate (PHA) synthesis. To further optimize the performance of MC PHA production process, VFA_{_odd} (i.e., VFA with odd carbon atoms) oriented acidification process was proposed and conducted in this study. Three regulation factors including reaction pH, fraction of added β-cyclodextrin (β-CD) and glycerol were selected and response surface methodology (RSM) was used to enhance and effectively regulate the VFA_{_odd} production while maintaining enough acidification degree in the WAS acidification. High percentage of VFA_{_odd} (larger than 60% and dominated by propionic acid) can be obtained in the operating condition area with glycerol addition ratio (quantified by C/N) ranging from 15 to 20 and reaction pH ranging from 8.0 to 9.5 when β-CD addition was held at zero level (0.2 g/gTSS) according to the RSM. Semi-continuous acidification and MC PHA production assays further verified the reliability and effectiveness of the VFA_{_odd} oriented acidification strategy. Microbial function group related to propionic acid production (G_prop) was defined based on the relationships between system function and microbial community structure, and 13 frequent species were found being involved in the G_prop. Roles of the group members in the oriented acidification were analyzed to understand the mechanisms of the regulation of VFA_{_odd} production at microbial ecological level. A synergistic effect of WAS and glycerol on the VFA_{_odd} production in the acidification process was revealed based on the ecological analysis.

Indigenous microorganisms residing in oil sands tailings biodegrade residual bitumen

The purpose of this study was to determine the capacity of indigenous microbes in tailings to degrade bitumen aerobically, and if acetate biostimulation further improved degradation. Fluid fine tailings, from Base Mine Lake (BML), were used as microbial inocula, and bitumen in the tailings served as a potential carbon source during the experiment. The tailings were capped with 0.22 μm-filtered BML surface water with or without BML bitumen and acetate addition and incubated for 100 days at 20 °C. CO₂ production and petroleum hydrocarbon reductions (50-70% for the biostimulation treatment) in the tailings were observed. DNA was extracted directly from the tailings, and increased bacterial density was observed by qPCR targeting the rpoB gene in the biostimulated group. 16 S rRNA sequencing was used to determine microbial composition profiles in each treatment group. The microbial communities indigenous to the tailings shifted after the bitumen was added. Acidovorax, Rhodoferax, Pseudomonas and Pseudoxanthomonas spp. significantly increased compared to the original microbial community and demonstrated tolerance to bitumen-based toxicity. The first three genera showed more potential for biostimulation treatment with acetate and may be important bitumen/hydrocarbon-degraders in an oil sands end pit lake environment.

A gradual change between methanogenesis and sulfidogenesis during a long-term UASB treatment of sulfate-rich chemical wastewater

The competition between methane-producing archaea and sulfate-reducing bacteria is an important topic in anaerobic wastewater treatment. In this study, an Up-flow Anaerobic Sludge Blanket Reactor (UASB) was operated for 330 days to evaluate the treatment performance of sulfate-rich wastewater. The effects of competition change between methane production and sulfate reduction on the organic removal efficiency, methane production, and electrons allocation were investigated. Synthetic wastewater was composed of ethanol and acetate with a chemical oxygen demand (COD)/SO₄^2- of 1.0. As a result, the COD removal efficiency achieved in long-term treatment was higher than 90%. During the initial stage, methane production was the dominant reaction. Sulfate-reducing bacteria (SRB) could only partially oxidize ethanol to acetate, and methane-producing archaea (MPA) utilized acetate for methane production. Methane production declined gradually over the long-term operation, whereas the sulfate-reducing efficiency increased. However, UASB performed well throughout the experiment because there was no significant inhibition. After the complete reduction of the sulfate, MPA converted the remaining COD into methane.

Enhanced performance and microbial community analysis of bioelectrochemical system integrated with bio-contact oxidation reactor for treatment of wastewater containing azo dye

Feasibility and superiority of the bioelectrochemical system integrated with biocontact oxidation (BES-BCO) for degradation and/or mineralization of azo dyes have been confirmed. In this study, the effects of hydraulic retention time (HRT), applied voltage, and dissolved oxygen (DO) concentration at the bioanode on the performance of BES-BCO and traditional BES were investigated. Using the response surface methodology, the optimum values of HRT, applied voltage, and DO concentration at the bioanode of BES-BCO were investigated to obtain the maximum decolouration and COD removal efficiency and minimum specific energy consumption (SEC). The microbial community structure in BES-BCO was studied for analyzing the change following the introduction of oxygen. The optimised solution was an applied voltage of 0.59V, HRT of 12h, and DO concentration of 0.96mg/L at the bioanode. Under such conditions, the DE, COD removal efficiency, and SEC values were 94.62±0.63%, 89.12±0. 32%, and 687.57±3.86J/g, respectively. In addition, after changing from BES to BES-BCO, the bacterial community structure of the bioanode underwent significant changes. Several aerobic aniline-degrading bacteria and anode-respiration bacteria (ARB) were found to dominate the community of the anode biofilm. The results showed that the removal of azo dye degradation by-products was closely correlated with the o-bioanode and the BCO bacterial community structure.

Methanol metabolism and archaeal community changes in a bioelectrochemical anaerobic digestion sequencing batch reactor with copper-coated graphite cathode

In this study, the metabolism of methanol and changes in an archaeal community were examined in a bioelectrochemical anaerobic digestion sequencing batch reactor with a copper-coated graphite cathode (BEAD-SBR_Cu). Copper-coated graphite cathode produced methanol from food waste. The BEAD-SBR_Cu showed higher methanol removal and methane production than those of the anaerobic digestion (AD)-SBR. The methane production and pH of the BEAD-SBR_Cu were stable even under a high organic loading rate (OLR). The hydrogenotrophic methanogens increased from 32.2 to 60.0%, and the hydrogen-dependent methylotrophic methanogens increased from 19.5 to 37.7% in the bulk of BEAD-SBR_Cu at high OLR. Where methanol was directly injected as a single substrate into the BEAD-SBR_Cu, the main metabolism of methane production was hydrogenotrophic methanogenesis using carbon dioxide and hydrogen released by the oxidation of methanol on the anode through bioelectrochemical reactions.

A review on the applications of microbial electrolysis cells in anaerobic digestion

Anaerobic digestion (AD) has been widely used for biogas or biofuel generation from waste treatment. Because a low production rate and instability of AD occur frequently, various technologies have been applied to improvement of AD. Microbial electrolysis cells (MECs), an emerging technology, can convert organic matter into hydrogen, methane, and other value-added products. Recent studies showed that application of MEC to AD (MEC-AD) can accelerate degradation of a substrate (including recalcitrant compounds) and alter AD microbial community by enriching exoelectrogens and methanogens thus increasing biogas production. With stable microbial communities established, improvement of MEC-AD for methane production was achieved. MEC-AD process can be monitored in real-time by detecting electric signals, which linearly correlate with substrate concentrations. This review attempts to evaluate interactions among the decomposition of substrates, MEC-AD system, and the microbial community. This analysis should provide useful insights into the improvement of methane production and the performance of MEC-AD.