An effective and recyclable adsorbent for the removal of heavy metal ions from aqueous system: Magnetic chitosan/cellulose microspheres

Adsorption properties of methylene blue and Cu(II) on magnetically oxidized tannic acid cross-linked carboxymethyl chitosan gels

In this work, tannic acid was selected as a green cross-linking agent to cross-link carboxymethyl chitosan to prepare a magnetic adsorbent (CC-OTA@Fe3O4), which was used to remove methylene blue (MB) and Cu2+. CC-OTA@Fe3O4 was characterized by FTIR, 13C NMR, XRD, VSM, TGA, BET and SEM. The adsorption behavior was studied using various parameters such as pH value, contact time, initial concentration of MB and Cu2+, and temperature. The results showed that adsorption of MB and Cu2+ followed the pseudo-second-order model and the Sips model. The maximum adsorption capacities were determined to be 560.92 and 104.25 mg/g MB and Cu2+ at 298 K, respectively. Thermodynamic analysis showed that the adsorption is spontaneous and endothermic in nature. According to the results of FTIR and XPS analyses, the electrostatic interaction was accompanied by π-π interaction and hydrogen bonding for MB adsorption, while complexation and electrostatic interaction were the predominant mechanism for Cu2+ adsorption. Furthermore, CC-OTA@Fe3O4 displayed remarkable stability in 0.1 M HNO3, exhibited promising recyclability, and could be easily separated from aqueous solutions in the magnetic field. This study demonstrates the potential of CC-OTA@Fe3O4 as an adsorbent for the removal of cationic dyes and heavy metals from wastewater.

Preparation and characterization of cellulose-chitosan/β-FeOOH composite hydrogels for adsorption and photocatalytic degradation of methyl orange

Biopolymer-based hydrogels have received great attention in wastewater treatment due to their excellent properties, e.g., high adsorption capacity, fast kinetics, reusability and ease of operation. In the present work, cellulose-chitosan/β-FeOOH composite hydrogels were prepared via co-dissolution and regeneration process as well as hydrothermal in situ synthesis of β-FeOOH. Effect of β-FeOOH loading on the properties of the composite hydrogels and the removal efficiency of methyl orange (MO) was investigated. Results showed that β-FeOOH was uniformly loaded onto the hydrogel framework, and the nanoporous structure of composite hydrogels could increase not only the effective contact area between β-FeOOH and the pollutants but also the active sites. Moreover, the increased β-FeOOH loading led to the enhanced MO removal rate under light conditions. When the loading time was extended from 6 h to 9 h, the MO removal rate increased by 21%, which can be mainly due to the photocatalytic degradation. In addition, MO removal rate reached 97.75% within 40 min under optimal conditions and attained 80.81% after five repetitions. The trapping experiment and EPR results indicated that the main active species were hydrogel radicals and holes. Consequently, this work provides an effective preparation approach for cellulose-chitosan/β-FeOOH composite hydrogel with high adsorption and photocatalytic degradation, which would hold great promise for wastewater treatment applications.

A novel chitosan/cellulose phosphonate composite hydrogel for ultrafast and efficient removal of Pb(II) and Cu(II) from wastewater

Developing green and high-performance adsorbents to separate heavy metals from wastewater is a challenging task. Biomass hydrogel has the advantages of low cost, renewability, and biodegradability, but it has the problem of low adsorption efficiency. Herein, a novel chitosan/cellulose phosphonate composite hydrogel(CS/MCCP) is fabricated by two steps of reactions including the Phosphorylation reaction and the Mannich reaction. As an excellent chelating group, the phosphonate group greatly enhances the adsorption efficiency of the biomass hydrogel. The CS/MCCP shows ultrafast adsorption rate and excellent adsorption capacity for Pb(II) and Cu(II). The saturated adsorption capacity of Pb(II) and Cu(II) is 211.42 and 74.29 mg·g-1, respectively. The adsorption equilibration time is only 10 min. The adsorption performance of the CS/MCCP is superior to that of the reported cellulose/chitosan hydrogels. Besides, an in-depth analysis of the adsorption mechanism is conducted using X-ray photoelectron spectroscopy(XPS) combined with Density Functional Theory(DFT) calculation. The results reveal that the adsorption mechanism is electrostatic attraction and surface complexation, and there is a synergistic coordination between the phosphonate groups and the amino groups.

Bilayer regenerated cellulose/quaternized chitosan-hyaluronic acid/collagen electrospun scaffold for potential wound healing applications

In this study, a bilayer electrospun scaffold has been prepared using regenerated cellulose (RC)/quaternized chitosan (CS) as the primary layer and collagen/hyaluronic acid (HA) as the second layer. An approximate 48 mol% substituted (estimated from 1H NMR) quaternized CS was used in this study. Both layers were crosslinked with EDC/NHS, reflecting an increase in UTS (2.29 MPa for the bilayer scaffold compared to 1.82 MPa for the RC scaffold). Initial cell viability, cell adhesion and proliferation, FDA staining for live cells, and hydroxyproline release rate from cells were evaluated with L929 mouse fibroblast cells. Also, detailed in vitro studies were performed using HADF cells, which include MTT Assay, Live/Dead imaging, DAPI staining, gene expression of PDGF, VEGF-A, and COL1 in RT-PCR, and cell cycle analysis. The collagen/HA-based bilayer scaffold depicted a 9.76-fold increase of VEGF-A compared to a 2.1-fold increase for the RC scaffold, indicating angiogenesis and vascularization potential. In vitro scratch assay was performed to observe the migration of cells in simulated wounds. Antimicrobial, antioxidant, and protease inhibitory activity were further performed, and overall, the primary results highlighted the potential usage of bilayer scaffold in wound healing applications.

Preparation, characterization, and adsorption kinetics of graphene oxide/chitosan/carboxymethyl cellulose composites for the removal of environmentally relevant toxic metals

This study attempted to develop a low-cost and eco-friendly bio-based composite adsorbent that is highly efficient in capturing potential toxic metals. The bio-composite adsorbent was prepared using graphene oxide (GO), carboxymethyl cellulose (CMC) and chitosan (CS); and characterized using FTIR, SEM-EDX and WAXD techniques. Metal-ion concentration in an aqueous solution was measured by ICP-OES. This article reveals that the adsorption of heavy metal ions varied according to the adsorbent quantity, initial metal concentration, pH, and interaction time. The metal ions' adsorption capacity (mg/g) was observed to increase when the interaction time and metal concentration increased. Conversely, metal ions adsorption was decreased with an increase in adsorbent dosages. The effect of pH on metal ions' adsorption was ion-specific. The substantial adsorption by GO/CMC/CS composite for Co2+, CrO42-, Mn2+ and Cd2+, had the respective values of 43.55, 77.70, 57.78, and 91.38 mg/g under acidic conditions. The metal ions experimental data were best fitted with pseudo-second-order (PSO) kinetics, and Freundlich isotherm model (except Co2+). The separation factors (RL) value in the present investigation were found between 0 and 1, meaning that the metal ions adsorption onto GO/CS/CMC composite is favorable. The RL and sorption intensity (1/n) values fitted well to the adsorption isotherm.

Cr (VI) and Pb (II) Removal Using Crosslinking Magnetite-Carboxymethyl Cellulose-Chitosan Hydrogel Beads

Heavy metals, such as chromium (VI) and lead (II), are the most common pollutants found in wastewater. To solve these problems, this research was intended to synthesize magnetite hydrogel beads (CMC-CS-Fe3O4) by crosslinking carboxymethyl cellulose (CMC) and chitosan (CS) and impregnating them with iron oxide (Fe3O4) as a potential adsorbent to remove Cr (VI) and Pb (II) from water. CMC-CS-Fe3O4 was characterized by pHzpc, scanning electron microscopy (SEM), and Fourier-transform infrared spectroscopy (FTIR). Batch removal experiments with different variables (CMC:CS ratio, pH, initial metals concentration, and contact time) were conducted, and the results revealed that CMC-CS-Fe3O4 with a CMC:CS (3:1) ratio had the best adsorption capacity for Cr (VI) and Pb (II) at pH levels of 2 and 4, respectively. The findings of this research revealed that the maximum adsorption capacity for Cr (VI) and Pb (II) were 3.5 mg/g and 18.26 mg/g, respectively, within 28 h at 30 ℃. The adsorption isotherm and adsorption kinetics suggested that removal of Cr (VI) and Pb (II) were fitted to Langmuir and pseudo-second orders. The highest desorption percentages for Cr (VI) and Pb (II) were 70.43% and 83.85%, achieved using 0.3 M NaOH and 0.01 M N·a2EDTA, respectively. Interestingly, after the first cycle of the adsorption-desorption process, the hydrogel showed a sudden increase in adsorption capacity for Cr (VI) and Pb (II) until it reached 7.7 mg/g and 33.0 mg/g, respectively. This outcome may have certain causes, such as entrapped metal ions providing easy access to the available sites inside the hydrogel or thinning of the outer layer of the beads leading to greater exposure toward active sites. Hence, CMC-CS-Fe3O4 hydrogel beads may have potential application in Cr (VI) and Pb (II) removal from aqueous solutions for sustainable environments.

Using deep eutectic solvent dissolved low-value cotton linter based efficient magnetic adsorbents for heavy metal removal

In this study, a novel magnetic bio-adsorbent was synthesized by modifying cotton linter (CL) cellulose with deep eutectic solvents (DESs) and Fe₃O₄ magnetic nanoparticles. The adsorption capacity of CL, Fe₃O₄/CL, Fe₃O₄/CL-oxidation, and Fe₃O₄/CL-DES for Cu²⁺ was 11.0, 66.1, 85.7, and 93.1 mg g^-1, respectively, under the optimal adsorption conditions of an initial pH value of 6.0, stirring rate of 300 rpm, and a temperature of 30 °C. The presence of Fe₃O₄ nanoparticles increased the proportion of hydroxyl groups and thus improved the ion-exchange ability of Cu²⁺. The dissolution of DES significantly decreased fiber crystallinity and increased the number of hydroxyl group (amorphous regions increased), thus improving the chelation reaction of Cu²⁺, which was favorable for surface adsorption. In addition, we used the Langmuir and Freundlich isothermal models to simulate the adsorption behavior of Fe₃O₄/CL-DES, and the results indicated that Cu²⁺ follows a Freundlich isotherm model of multilayer adsorption. The fitting of the adsorption kinetics model indicated that the adsorption process involves multiple adsorption mechanisms and can be described by a quasi-second-order model. These results provide a potential method for the preparation of high-efficiency adsorbents from low-value cotton linter, which has broad application prospects in wastewater treatment.

Cellulose/inorganic nanoparticles-based nano-biocomposite for abatement of water and wastewater pollutants

Nanostructured materials offer a significant role in wastewater treatment with diminished capital and operational expense, low dose, and pollutant selectivity. Specifically, the nanocomposites of cellulose with inorganic nanoparticles (NPs) have drawn a prodigious interest because of the extraordinary cellulose properties, high specific surface area, and pollutant selectivity of NPs. Integrating inorganic NPs with cellulose biopolymers for wastewater treatment is a promising advantage for inorganic NPs, such as colloidal stability, agglomeration prevention, and easy isolation of magnetic material after use. This article presents a comprehensive overview of water treatment approaches following wastewater remediation by green and environmentally friendly cellulose/inorganic nanoparticles-based bio-nanocomposites. The functionalization of cellulose, functionalization mechanism, and engineered hybrid materials were thoroughly discussed. Moreover, we also highlighted the purification of wastewater through the composites of cellulose/inorganic nanoparticles via adsorption, photocatalytic and antibacterial approach.

Titanium Oxide and Zinc Oxide Nanoparticles in Combination with Cadmium Tolerant Bacillus pumilus Ameliorates the Cadmium Toxicity in Maize

The efficiency of Cd-tolerant plant growth-promoting bacteria (PGPB), zinc oxide nanoparticles (ZnO NPs), and titanium dioxide nanoparticles (TiO₂) in maize growing in Cd-rich conditions was tested in the current study. The best Cd-tolerant strain, Bacillus pumilus, exhibited plant growth stimulation in vivo and in vitro experiments. We determined the toxic concentrations (30 (ppm)) of both NPs for plant growth. B. pumilus, ZnO NPs (20 (ppm)), and TiO₂ NPs (10 (ppm)) had a synergistic effect on plant growth promotion in Cd-contaminated soil (120 (ppm)) in a pot experiment. Both alone and in combination, these therapies reduced Cd toxicity, resulting in improved stress metabolism and defense responses. The combined treatments showed increased relative water content, photosynthetic pigments, proline, total sugars, and proteins and significantly reduced lipid peroxidation. Moreover, this combination increased the levels of minerals and antioxidants and reduced Cd bioaccumulation in shoots and roots by 40–60%. Our in silico pipeline presented a novel picture of the participation of ZnO–TiO₂ protein interaction in both B. pumilus and maize. These findings provide fresh insights on the use of B. pumilus, ZnO, and TiO₂ NPs, both separately and in combination, as a viable and environmentally benign strategy for reducing Cd stress in maize.

Agricultural waste materials for adsorptive removal of phenols, chromium (VI) and cadmium (II) from wastewater: A review

Management of basic natural resources and the spent industrial and domestic streams to provide a sustainable safe environment for healthy living is a magnum challenge to scientists and environmentalists. The present remedial approach to the wastewater focuses on recovering pure water for reuse and converting the contaminants into a solid matrix for permanent land disposal. However, the ground water aquifers, over a long period slowly leach the contaminants consequently polluting the ground water. Synthetic adsorbents, mainly consisting of polymeric resins, chelating agents, etc. are efficient and have high specificity, but ultimate disposal is a challenge as most of these materials are non-biodegradable. In this context, it is felt appropriate to review the utility of adsorbents based on natural green materials such as agricultural waste and restricted to few model contaminants: phenols, and heavy metals chromium(VI), and cadmium(II) in view of the vast amount of literature available. The article discusses the features of the agricultural waste material-based adsorbents including the mechanism. It is inferred that agricultural waste materials are some of the common renewable sources available across the globe and can be used as sustainable adsorbents. A discussion on challenges for industrial scale implementation and integration with advanced technologies like magnetic-based approaches and nanotechnology to improve the removal efficiency is included for future prospects.

Heavy Metal Adsorption Using Magnetic Nanoparticles for Water Purification: A Critical Review

Research on contamination of groundwater and drinking water is of major importance. Due to the rapid and significant progress in the last decade in nanotechnology and its potential applications to water purification, such as adsorption of heavy metal ion from contaminated water, a wide number of articles have been published. An evaluating frame of the main findings of recent research on heavy metal removal using magnetic nanoparticles, with emphasis on water quality and method applicability, is presented. A large number of articles have been studied with a focus on the synthesis and characterization procedures for bare and modified magnetic nanoparticles as well as on their adsorption capacity and the corresponding desorption process of the methods are presented. The present review analysis shows that the experimental procedures demonstrate high adsorption capacity for pollutants from aquatic solutions. Moreover, reuse of the employed nanoparticles up to five times leads to an efficiency up to 90%. We must mention also that in some rare occasions, nanoparticles have been reused up to 22 times.

Application of biodegradable cellulose-based biomass materials in wastewater treatment

Water bodies contain a large number of harmful environmental pollutants, including oil, heavy metal ions and dyes, which has become a major global problem. The current work focusses on the development and future prospect of sustainable application of biodegradable cellulose-biomass materials in water treatment, considering that they show an important prospect in wastewater treatment. This paper summarizes the advantages and disadvantages of cellulose-biomass materials in removing harmful substances and pollutants from water and the key problems the technology faces. Cellulose-biomass material has unique structure, is environment friendly, degradable, renewable and provides low energy cost benefits, among other advantages. In this paper, the research progress of wastewater treatment in recent years is reviewed from the following three aspects: oil-water separation, heavy metal ions in water, and dye adsorption. The future research direction is also discussed.

Spherical Cellulose Micro and Nanoparticles: A Review of Recent Developments and Applications

Cellulose, the most abundant natural polymer, is a versatile polysaccharide that is being exploited to manufacture innovative blends, composites, and hybrid materials in the form of membranes, films, coatings, hydrogels, and foams, as well as particles at the micro and nano scales. The application fields of cellulose micro and nanoparticles run the gamut from medicine, biology, and environment to electronics and energy. In fact, the number of studies dealing with sphere-shaped micro and nanoparticles based exclusively on cellulose (or its derivatives) or cellulose in combination with other molecules and macromolecules has been steadily increasing in the last five years. Hence, there is a clear need for an up-to-date narrative that gathers the latest advances on this research topic. So, the aim of this review is to portray some of the most recent and relevant developments on the use of cellulose to produce spherical micro- and nano-sized particles. An attempt was made to illustrate the present state of affairs in terms of the go-to strategies (e.g., emulsification processes, nanoprecipitation, microfluidics, and other assembly approaches) for the generation of sphere-shaped particles of cellulose and derivatives thereof. A concise description of the application fields of these cellulose-based spherical micro and nanoparticles is also presented.

Mesoporous cellulose-chitosan composite hydrogel fabricated via the co-dissolution-regeneration process as biosorbent of heavy metals

Developing low-cost and high-performance biosorbent for water purification continues drawing more and more attention. In this study, cellulose-chitosan composite hydrogels were fabricated via a co-dissolution and regeneration process using a molten salt hydrate (a 60 wt% aqueous solution of LiBr) as a solvent. The addition of chitosan not only introduced functionality for metal adsorption but also increased the specific surface area and improved the mechanical strength of the composite hydrogel, compared to pure cellulose hydrogel. Batch adsorption experiments indicated that the composite hydrogel with 37% cellulose and 63% chitosan exhibited an adsorption capacity of 94.3 mg/g (1.49 mmol/g) toward Cu²⁺ at 23 °C, pH 5, and initial metal concentration of 1500 mg/L, which was 10 times greater than the adsorption capacity of pure cellulose hydrogel. Competitive adsorption from a mixed metals solution revealed that the cellulose-chitosan composite hydrogel exhibited selective adsorption of the metals in the order of Cu²⁺ > Zn²⁺ > Co²⁺. This study successfully demonstrated an innovative method to fabricate biosorbents from abundant and renewable natural polymers (cellulose and chitosan) for removing metal ions from water.

Direct Mercury Detection in Landfill Leachate Using a Novel AuNP-Biopolymer Carbon Screen-Printed Electrode Sensor

A novel Au nanoparticle (AuNP)-biopolymer coated carbon screen-printed electrode (SPE) sensor was developed through the co-electrodeposition of Au and chitosan for mercury (Hg) ion detection. This new sensor showed successful Hg2+ detection in landfill leachate using square wave anodic stripping voltammetry (SWASV) with an optimized condition: a deposition potential of -0.6 V, deposition time of 200 s, amplitude of 25 mV, frequency of 60 Hz, and square wave step voltage of 4 mV. A noticeable peak was observed at +0.58 V associated with the stripping current of the Hg ion. The sensor exhibited a good sensitivity of ~0.09 μA/μg (~0.02 μA/nM) and a linear response over the concentration range of 10 to 100 ppb (50-500 nM). The limit of detection (LOD) was 1.69 ppb, which is significantly lower than the safety limit defined by the United States Environmental Protection Agency (USEPA). The sensor had an excellent selective response to Hg2+ in landfill leachate against other interfering cations (e.g., Zn2+, Pb2+, Cd2+, and Cu2+). Fifteen successive measurements with a stable peak current and a lower relative standard deviation (RSD = 5.1%) were recorded continuously using the AuNP-biopolymer-coated carbon SPE sensor, which showed excellent stability, sensitivity and reproducibility and consistent performance in detecting the Hg2+ ion. It also exhibited a good reliability and performance in measuring heavy metals in landfill leachate.

Removal of Pb(II) from contaminated waters using cellulose sulfate/chitosan aerogel: Equilibrium, kinetics, and thermodynamic studies

In this study, the cellulose sulfate/chitosan aerogel (CCA) was prepared by chitosan and sulfonated cotton, and its efficiency was assessed for lead removal from contaminated waters. The adsorbent was determined by FESEM, EDS, FTIR, and BET analysis. The batch experiments were designed by Design-Expert software. At an initial lead concentration of 300 mg L^-1, the contact time of 40 min, and the temperature of 26 °C, the maximum adsorption capacity and the removal efficiency were 137.8 mg g^-1 and 91.9%, respectively. Also, the effect of ions including cations and anions at 100 mg L^-1 was investigated, and it was found that the presence of anions does not have much effect on adsorption, but among cations, calcium and magnesium have the inhibitor effect on adsorption due to their double plosive. Adsorption isotherms were studied at different temperatures, and the kinetics of the reaction were investigated at different concentrations. Thermodynamic parameters indicated that the adsorption process was spontaneous, endothermic, and increasing irregularity at the adsorbent level. Adsorption recovery was performed five times adsorption and de-adsorption by hydrochloric acid 1 M washing and only 10% of adsorption capacity was decreased.

Hollow cellulose-carbon nanotubes composite beads with aligned porous structure for fast methylene blue adsorption

Polysaccharide based beads with unique porous structure have gained considerable interests due to their specific adsorption behaviors and biodegradability. The purpose of this paper was to develop hollow cellulose/carbon nanotubes composite beads with aligned porous structure which have potential applications in fast adsorption field. The composite beads were fabricated by ice template and freeze-drying technology. Different characterizations have proved that the carbon nanotubes and magnetic nanoparticles have been incorporated into the cellulose beads. Higher concentration of carbon nanotubes and cellulose would result in a larger diameter of the composite beads. The composite beads can effectively adsorb the methylene blue (MB). The pseudo-second-order model and Langmuir isotherm were best fitted to the adsorption. The composite beads showed a fast adsorption behavior towards MB with a t_1/2 of 1.07 min obtained from pseudo-second-order model. The maximum adsorption capacity was 285.71 mg g^-1 at pH 7.0. The composite beads also showed good reusability and biodegradability. We anticipate that different polysaccharides based composite beads with aligned porous structure can be obtained through the similar methods and applied in adsorption fields.

Turning waste into treasure: Reuse of contaminant-laden adsorbents (Cr(vi)-Fe3O4/C) as anodes with high potassium-storage capacity

In this study, we try to find possible solutions to synchronously solving energy and environmental problems. In our design, orange peel is used as a carbon source to synthesize low-cost Fe₃O₄/C composites, which are employed as adsorbents to purify Cr(vi)-contaminated water. After that, these Cr(vi)-laden Fe₃O₄/C composites are used and tested as anodes in potassium-ion batteries. It is found that their K-storage capacity is more than 300 mAh g^-1 at a current density of 0.1 A g^-1, depending on the mass content of Fe₃O₄. The more Fe₃O₄ component in composite, the more adsorbed Cr(vi) species through chemisorption, and the larger K-storage capacity. The good electrical conductivity of cabon-based anodes endows them with superior rate performance. At current densities of 0.1, 0.5, 1 and 2 A g^-1, K-storage capacity amounts to 357.8, 316.3, 276.3 and 236.8 mAh g^-1, respectively. The reuse of contaminant-laden adsorbents as anodes will shed new light on the disposal of exhausted adsorbents after water treatment and development of anode materials for secondary batteries.

Cadmium and copper heavy metal treatment from water resources by high-performance folic acid-graphene oxide nanocomposite adsorbent and evaluation of adsorptive mechanism using computational intelligence, isotherm, kinetic, and thermodynamic analyses

In this paper, folic acid-coated graphene oxide nanocomposite (FA-GO) is used as an adsorbent for the treatment of heavy metals including cadmium (Cd²⁺) and copper (Cu²⁺) ions. As such, graphene oxide (GO) is modified by folic acid (FA) to synthesize FA-GO nanocomposite and characterized by the atomic force microscopy (AFM), Fourier transform-infrared (FT-IR) spectrophotometry, scanning electron microscopy (SEM), and C/H/N elemental analyses. Also, computational intelligence tests are used to study the mechanism of the interaction of FA molecules with GO. Based on the results, FA molecules formed a strong π-π stacking, chemical, and hydrogen bond interactions with functional groups of GO. Main parameters including pH of the sample solution, amounts of adsorbent, and contact time are studied and optimized by the Response Surface Methodology Based on Central Composite Design (RSM-CCD). In this study, the equilibrium of adsorption is appraised by two (Langmuir and Freundlich and Temkin and D-R models) and three parameter (Sips, Toth, and Khan models) isotherms. Based on the two parameter evaluations, Langmuir and Freundlich models have high accuracy according to the R² coefficient (more than 0.9) in experimental curve fittings of each pollutant adsorption. But, multilayer adsorption of each contaminant onto the FA-GO adsorbent (Freundlich equation) is demonstrated by three parameter isotherm analysis. Also, isotherm calculations express maximum computational adsorption capacities of 103.1 and 116.3 mg g^-1 for Cd²⁺ and Cu²⁺ ions, correspondingly. Kinetic models are scrutinized and the outcomes depict the adsorption of both Cd²⁺ and Cu²⁺ followed by the pseudo-second-order equation. Meanwhile, the results of the geometric model illustrate that the variation of adsorption and desorption rates do not have any interfering during the adsorption process. Finally, thermodynamic studies show that the adsorption of Cu²⁺ and Cd²⁺ onto the FA-GO nanocomposite is an endothermic and spontaneous process.

Efficient removal of hexavalent chromium from electroplating wastewater using polypyrrole coated on cellulose sulfate fibers

In this study, cellulose sulfate was synthesized through sulfonation of cotton, and polypyrrole was coated on the surface of fibers. Then, the optimum ratio of pyrrole to cellulose sulfate was evaluated, and the physical, chemical, and morphological properties of the composite were assessed by using FESEM, EDS, FTIR, BET, and TGA analysis. Furthermore, adsorption of hexavalent chromium using the composite adsorbent was studied by the results of designed experiments with the Box-Behnken technique to assess the effect of pH, contact time, adsorbent dose and the initial concentration of hexavalent chromium and optimize the adsorption process. The removal percentage was 99.9% under the optimum conditions (adsorbent dose, 4 g L-1; initial concentration of Cr(VI), 200 mg L-1; pH value, 2; contact time, 200 min). The results of adsorption isotherms illustrated that the adsorption process followed Redlich-Peterson, Freundlich, Radke-Prausnitz, and UT models, and the calculated maximum adsorption capacity by the Langmuir model was 198 mg g-1. Based on the kinetic and thermodynamic studies, the adsorption process followed the intraparticle diffusion model and showed the endothermic and spontaneous adsorption with an increase in entropy on the adsorbent surface. The presence of copper, nickel and zinc cations had no adverse effect on the removal percentage of hexavalent chromium significantly. The adsorbent was reused successfully in four sequential treatments. Consequently, the synthesized adsorbent is efficient due to the high efficiency of hexavalent chromium removal percentage from electroplating effluent (99.87%).

Enzymatic preparation of oxidized viscose fibers-based biosorbent modified with ε-polylysine for dyes removal and microbial inactivation

A novel fiber-based biosorbent for dyes removal and microbial inactivation was prepared by enzymatic oxidization of viscose fibers and further modification with ε-polylysine. Glucose oxidase (GOx) was first employed as the enzyme for oxidation of viscose fibers. The consequences illustrated that the hydroxyl group on C1 position of viscose fibers was successfully oxidized with oxidation ratio of 2.43 ± 0.31%. Subsequently, ε-polylysine with average molecular weight of 4.44 ± 1.13 KDa and antimicrobial activity to E. coli of 90.48 ± 1.64 was modified with oxidized viscose fibers by lipase. Experimental results showed that oxidized viscose fibers were successfully modified with ε-polylysine with optimum degree of modification (DM) of 13.56 ± 1.05%. This oxidized viscose fiber modified with ε-polylysine (OVF-PL) displayed good dyes adsorption (or dyes removal) capacity for both anionic and cationic dyes, especially for anion dyes. Furthermore, OVF-PL showed excellent antimicrobial activity against E. coli and B. subtilis, particularly for E. coli, with GIB of 92.65%. Such fiber-based may offer a new pathway for preparing economical and efficient biosorbent for environmental remedy purpose.

Enhanced synergistic removal of Cr(VI) and Cd(II) with bi-functional biomass-based composites

Cr(VI) and Cd(II) are typical heavy metal ions and their co-removal is significant. Nitrogen-doped, bi-functional, and biomass-based composites (CP-BA) were successfully applied for efficient and synergistic removal of Cr(VI) and Cd(II). The mutual promotion ratios of adsorption capacity by Cr(VI) and Cd(II) were 161.32 % and 14.13 %, respectively. In addition, all coexisting inorganic anions could extremely promote the removal of Cd(II) with the best promotion ratio upon phosphate ions as high as 80.00 %. The following co-removal mechanisms were deeply revealed: (1) Cr(VI) combined with protonated imine groups could weaken the electrostatic repulsion between CP-BA and Cd(II) by electrostatic shielding, and further promoted the coordination of Cd(II) with hydroxyl, carboxyl and neutral imine groups. (2) Cd(II) which were coordinated to neutral imine groups could form cation bridges, and thus promoted the interaction with Cr(VI) because of the electrostatic attraction. Moreover, the removal capacity for Cr(VI) and Cd(II) did not display obvious reduction even after four cycles. Therefore, CP-BA showed a great potential in the co-removal of inorganic anion-cation complexes from wastewater.

Rational design, synthesis, adsorption principles and applications of metal oxide adsorbents: a review

The shortage of water resources and increasingly serious water pollution have driven the development of high-efficiency water treatment technology. Among a variety of technologies, adsorption is widely used in environmental remediation. As a class of typical adsorbents, metal oxides have been developed for a long time and continued to attract widespread attention, since they have unique physicochemical properties, including abundant surface active sites, high chemical stability, and adjustable shape and size. In this review, the basic principles of the adsorption process will be first elucidated, including affecting factors, evaluation index, adsorption mechanisms, and common kinetic and isotherm models. Then, the adsorption properties of several typical metal oxides, and key parameters affecting the adsorption performance such as particle/pore size, morphology, functionalization and modification, supports and calcination temperature will be discussed, as well as their application in the removal of various inorganic and organic contaminants. In addition, desorption and recycling of the spent adsorbent are summarized. Finally, the future development of metal oxide based adsorbents is also discussed.

Efficient Selective Removal of Pb(II) by Using 6-Aminothiouracil-Modified Zr-Based Organic Frameworks: From Experiments to Mechanisms

We report an efficient, reusable, and selective 6-aminothiouracil (ATA)-modified Zr(IV)-based adsorbent (defined as UiO-66-ATA(Zr)) for lead ion removal in water. The adsorption equilibrium time and the maximum sorption capacity of UiO-66-ATA(Zr) for Pb(II) are, respectively, 120 min and 386.98 mg/g at pH 4 and 298 K. The Pb(II) removal rate reaches 96% at 60 min and exceeds 99% at the equilibrium state in the pH range of 2.0-5.8. Hill and pseudo-second-order models can well describe the sorption process. Pb(II) adsorbing onto UiO-66-ATA(Zr) is an irreversible, favorable chemisorption process with multimolecule participation and film diffusion control. The calculations of density functional theory, the experimental results, and the characterization analyses suggest that the binding mechanisms are the chelation and ion-exchange/electrostatic interactions between hydroxyl/amino/sulfhydryl groups of UiO-66-ATA(Zr) and Pb(II). Besides, UiO-66-ATA(Zr) has a better affinity to Pb(II) than the coexisting ions in water and an excellent repeatability at eight cycles of adsorption. Moreover, the thermodynamic study shows that UiO-66-ATA(Zr) adsorbing Pb(II) is an endothermic reaction. Thus, UiO-66-ATA(Zr) is a prospective sorbent for Pb(II) removal under the initiative of environmental protection and water purification, and this work may also provide an idea for industrial catalysis.

Efficient U(VI) adsorption on iron/carbon composites derived from the coupling of cellulose with iron oxides: Performance and mechanism

Novel iron/carbon composites were successfully prepared via coupling of cellulose with iron oxides (e.g. α-FeOOH, Fe₂O₃ and Fe(NO₃)₃·9H₂O) at different temperatures under nitrogen atmosphere. Characterization by various techniques implied that chemical interaction between cellulose and Fe₃O₄/Fe⁰ existed in the as-prepared iron/carbon composites. The site of interaction between cellulose and iron precursors was illustrated (mainly combined with COO-). The self-reduction of Fe³⁺ to Fe²⁺ or even Fe⁰ and the interaction between carbon and Fe₃O₄/Fe⁰ in the calcination process realized the strong magnetism of the composites. Batch experiments and spectroscopic techniques indicated that the maximum adsorption capacity of MHC-7 for U(VI) (105.3 mg/g) was significantly higher than that of MGC-7 (86.0 mg/g) and MFC-7 (79.0 mg/g), indicating that Fe₂O₃ can be regarded as the remarkable iron resource for the iron/carbon composites. XPS results revealed that the oxygen-containing groups were responsible for the adsorption process of U(VI) on iron/carbon composites, and the adsorption of carbon and reduction of Fe⁰/Fe₃O₄ toward U(VI) were synergistic during the reaction process. In addition, the iron/carbon composites exhibited a good recyclability, recoverability and stability for U(VI) adsorption in the regeneration experiments. These findings demonstrated that the iron/carbon composites can be considered as valuable adsorbents in environmental cleanup and the Fe₂O₃ was a promising iron resource for the preparation of iron/carbon composites.

Fabrication of Cellulose Nanocrystal-g-Poly(Acrylic Acid-Co-Acrylamide) Aerogels for Efficient Pb(II) Removal

In this work, cellulose nanocrystals (CNCs) obtained by the acid hydrolysis of waste bamboo powder were used to synthesize cellulose nanocrystal-g-poly(acrylic acid-co-acrylamide) (CNC-g-P(AA/AM)) aerogels via graft copolymerization followed by freeze-drying. The structure and morphology of the resulting aerogels were characterized by Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM), and the CNC-g-P(AA/AM) aerogels exhibited excellent absorbent properties and adsorption capacities. Subsequent Pb(II) adsorption studies showed that the kinetic data followed the pseudo-second-order equation, while the adsorption isotherms were best described using the Langmuir model. The maximum Pb(II) adsorption capacity calculated by the Langmuir model reached up to 366.3 mg/g, which is a capacity that outperformed that of the pure CNC aerogel. The CNC-g-P (AA/AM) aerogels become structurally stable through chemical cross-linking, which enabled them to be easily regenerated in HCl solution and retain the adsorption capacity after repeated use. The aerogels were found to maintain 81.3% removal efficiency after five consecutive adsorption-desorption cycles. Therefore, this study demonstrated an effective method for the fabrication of an aerogel adsorbent with an excellent reusability in the effective removal of Pb(II) from aqueous solutions.

Enhanced removal of trichlorfon and Cd(II) from aqueous solution by magnetically separable chitosan beads immobilized Aspergillus sydowii

Simultaneous removal of heavy metals and organics from wastewater has always been an environmental problem with great concern. In this study, a novel ecofriendly bioborbent, magnetic chitosan beads immobilized Aspergillus sydowii (MCBAs) were synthesized and used to simultaneously remove trichlorfon (TCF) and Cd(II) from aqueous solution. MCBAs showed an increased special surface area (55.38 m²·g^-1) through immobilizing A. sydowii and its saturation magnetization reached 14.62 emu·g^-1. The equilibrium removal capacities of TCF and Cd(II) were 135.43 mg·g^-1 and 56.40 mg·g^-1 in the co-system with 200 mg·L^-1 TCF and 50 mg·L^-1 Cd(II), respectively. The removal capacities of TCF and Cd(II) were strongly depended on the immobilized A. sydowii spore concentration, initial concentrations of TCF and Cd(II), and MCBAs dose. TCF biodegradation intermediates were identified by gas chromatography-mass spectrometry system. Fourier transform infrared spectra displayed that -OH and -NH groups on MCBAs mainly participated in the Cd(II) sequestration and the CO stretching vibration was possibly related to the degradation intermediates of TCF. MCBAs exhibited excellent recyclability upto four cycles. Therefore, MCBAs are suitable and effective for the simultaneous removal of TCF and Cd(II) from wastewater.

Selective adsorption of Ag (Ⅰ) from aqueous solutions using Chitosan/polydopamine@C@magnetic fly ash adsorbent beads

A Chitosan/polydopamine@C@magnetic fly ash (CPCMFA) adsorbent bead was prepared for adsorption of Ag (Ⅰ) in aqueous solutions and exhibited good selectivity for Ag (Ⅰ) ion. To investigate its adsorption behaviors, equilibrium, kinetic and selective studies were conducted through batch experiments. Additionally, the influence of the pH value was also evaluated. In addition, the nature, composition, morphology, and magnetic property of the prepared adsorbent beads were characterized by Fourier transform-infrared (FT-IR) spectroscopy, X-ray diffraction (XRD) analysis, thermogravimetric-differential scanning calorimetry (TG-DSC) analysis, scanning electron microscopy (SEM), transmission electron microscopy (TEM) and vibrating-sample magnetometry (VSM). The freeze-dry form of CPCMFA also exhibited high adsorption capacity and selectivity for Ag (Ⅰ), with a maximum adsorption capacity of 57.02 mg/g at pH 4 and 30 °C. The experimental data were well described by the Langmuir isotherm and elovich kinetic models. The thermodynamics parameters, ΔH = 10.653 kJ/mol, ΔS = 96.63 J/mol K and ΔG < 0, demonstrate that the adsorption of Ag (Ⅰ) on the freeze-dry form adsorbent is spontaneous and endothermic. Moreover, regeneration studies showed the high recyclability of the adsorbent, which after five cycles of use it was still able to adsorb 95.7% of the amount adsorbed by the fresh adsorbent.

Structural design of magnetic biosorbents for the removal of ciprofloxacin from water

Magnetic biosorbents with specific morphological and molecular structure (PMCCs) were designed for the removal of ciprofloxacin (CIP) from water. Radical polymerization method was applied to immobilize the designed polymer brushes onto core-shell shaped magnetic microspheres to fabricate PMCCs. PMCCs exhibited a maximum adsorption capacity of 527.93 mg·g^-1, which is much higher than reported adsorbents, owing to the complete stretch of polymer brushes and increased active sites as well as enhanced interaction. The investigation on the adsorption behavior of PMCCs for CIP manifested that CIP adsorption well fitted the Langmuir isotherm model and pseudo-second-order kinetic model. The calculated thermodynamic parameters suggested that CIP adsorption onto PMCCs was spontaneous and exothermic. Further recycling experiments showed a loss of less than 20% in the CIP adsorption capacity after five times, demonstrating the reusability of the as-designed biosorbents.