A critical review on analysis in pretreatment of lignocelluloses: Degree of polymerization, adsorption/desorption, and accessibility

Characterization of microcrystalline cellulose prepared from long and short fibers and its application in ibuprofen tablets

As a bio-based material, microcrystalline cellulose (MCC) has been applied in many fields including pharmaceuticals, foods, and cosmetics in recent years. However, traditional preparation methods of MCC are facing many challenges due to economic and eco-environmental issues. In this study, softwood dissolved pulp was sieved to long fiber (LF) and short fiber (SF), and subsequently to prepare LF-MCC and SF-MCC by hydrochloric acid hydrolysis at different acid dosages (3-7 wt%), reaction times (30-90 min), and temperatures (75-95 °C). The as-obtained MCC products were compared in terms of morphology, size, crystallinity, and chemical structure. The results indicated that the crystallinity and yield of LF-MCC were high, with maximum values of 78.41 % and 98.68 %, respectively. The particle size distribution of SF-MCC was more uniform in the range of 20-80 μm, with a maximum of 59.44 % at 20-80 μm occupancy proportion. Moreover, SF-MCC had a typical rod-like shape and larger surface area as well as better thermal behavior than LF-MCC. When LF-MCC and SF-MCC were used as fillers in the production of ibuprofen tablets, the tablets added with LF-MCC exhibited higher hardness, friability, dissolution rate, and shorter disintegration time. Therefore, this work is very beneficial for the preparation and application of MCC.

Valorization of crop residues and animal wastes: Anaerobic co-digestion technology

To switch the over-reliance on fossil-based resources, curb environmental quality deterioration, and promote the use of renewable fuels, much attention has recently been directed toward the implementation of sustainable and environmentally benign 'waste-to-energy' technology exploiting a clean, inexhaustible, carbon-neutral, and renewable energy source, namely agricultural biomass. From this perspective, anaerobic co-digestion (AcoD) technology emerges as a potent and plausible approach to attain sustainable energy development, foster environmental sustainability, and, most importantly, circumvent the key challenges associated with mono-digestion. This review article provides a comprehensive overview of AcoD as a biochemical valorization pathway of crop residues and livestock manure for biogas production. Furthermore, this manuscript aims to assess the different biotic and abiotic parameters affecting co-digestion efficiency and present recent advancements in pretreatment technologies designed to enhance feedstock biodegradability and conversion rate. It can be concluded that the substantial quantities of crop residues and animal waste generated annually from agricultural practices represent valuable bioenergy resources that can contribute to meeting global targets for affordable renewable energy. Nevertheless, extensive and multidisciplinary research is needed to evolve the industrial-scale implementation of AcoD technology of livestock waste and crop residues, particularly when a pretreatment phase is included, and bridge the gap between small-scale studies and real-world applications.

Effect of alkali treatment on enzymatic hydrolysis of p-toluenesulfonic acid pretreated bamboo substrates

The comprehensive separation and utilization of whole components of lignocellulosic materials has received extensive attention in present research. This study focused on the efficacy of alkali treatment for enzymatic saccharification of cellulose based on p-toluenesulfonic acid (p-TsOH) pretreated bamboo substrate. The results showed that the cellulose to glucose conversion yield was 94.69 % under optimized conditions of 0.4 g NaOH/g, 160 °C and 4 h (soaked), which after only 6 h enzymatic hydrolysis time. Alkali lignin recovery was 88.51 %, with potential for conversion to lignin derivatives. The yield of hemicellulose in the pretreated filtrate was 51.85 % after the 4th cycling reuse of p-TsOH. This work has borrowed the advantages of p-TsOH pretreatment of depolymerized hemicellulose from bamboo, combined with a low-priced weak alkali secondary treatment method, which can be effectively applied to the co-production of lignin, xylooligosaccharide, xylose and glucose, and the whole process is green and economically sustainable.

Partial wet oxidation of dairy manure as a pretreatment process to produce acetic acid 'a Source Growth of Methanogens'

Wet oxidation can be an effective process for the pretreatment of complex biomass such as lignocellulose. However, studies on the use of wet oxidation for treating solid waste such as dairy manure are limited. The use of partial wet oxidation to convert dairy manure into low molecular weight carboxylic acids as final products were investigated. This work focuses on the performance of the sub-critical wet oxidation treatment of dairy cattle manure as a conversion/pretreatment process to release matter from the lignocellulosic fraction rather than a destructive process. The operating conditions were controlled at the short residence time and optimal temperature in the presence of oxygen under a pressure of 120 psi. The thermal hydrolysis under wet oxidation significantly affected conversion manure slurry into organic acids. The concentration of acetic acid reached 1778 mg L-1, achieved at 190°C (60 minutes reaction time) as the reaction temperature increased within the range of 150°C-200°C, total organic carbon was reduced and monomers in the process liquids decreased. On the other hand, soluble COD in process liquids increased with an increment in reaction temperature. The results provide insights into technical options to pretreat dairy manure to improve biochemical conversion yield.

Biochemical methane potential of dairy manure residues and separated fractions: An Australia-wide study of the impact of production and cleaning systems

This study investigated biochemical methane potential (B0) of manure residues and solid-liquid separation fractions from Australian dairies. This is important for country-specific sector emissions and biogas potential estimates. A range of samples were collected from 12 farms across 4 Australian states, and B0 was measured. A first B0 value for grazing dairy effluent is reported, at 161 LCH4·kgVS-1. The B0 of manure residues from intensive dairies with total mixed ration feeding was not significantly different, at 202 LCH4·kgVS-1. Passive solid-liquid separation decreased B0 with potential fugitive methane losses. Mechanical separation preserved B0, allowing organic matter diversion to reduce fugitive methane emissions. Cleaning method at a dairy significantly influenced residue total solids content, important for solid-liquid separation and selection of anaerobic digestion technology. Overall, B0 for Australian dairy residues was estimated at 76.2 million m3N methane per annum, with a total energy content of 2.8 petajoules·annum-1.

Thermochemical behavior of agricultural and industrial sugarcane residues for bioenergy applications

The Colombian sugarcane industry yields significant residues, categorized as agricultural and industrial. While bagasse, a widely studied industrial residue, is employed for energy recovery through combustion, agricultural residues are often left in fields. This study assesses the combustion behavior of these residues in typical collection scenarios. Additionally, it encompasses the characterization of residues from genetically modified sugarcane varieties in Colombia, potentially exhibiting distinct properties not previously documented. Non-isothermal thermogravimetrical analysis was employed to study the thermal behavior of sugarcane industrial residues (bagasse and pith) alongside agricultural residues from two different sugarcane varieties. This facilitated the determination of combustion reactivity through characteristic combustion process temperatures and technical parameters like ignition and combustion indexes. Proximate, elemental, and biochemical analyses revealed slight compositional differences. Agricultural residues demonstrated higher ash content (up to 34%) due to foreign matter adhering during harvesting, as well as soil and mud attachment during collection. Lignin content also varied, being lower for bagasse and pith, attributed to the juice extraction and milling processes that remove soluble lignin. Thermogravimetric analysis unveiled a two-stage burning process in all samples: devolatilization and char formation (~170°C), followed by char combustion (~310°C). Characteristic temperatures displayed subtle differences, with agricultural residues exhibiting lower temperatures and decomposition rates, resulting in reduced ignition and combustion indexes. This indicates heightened combustion reactivity in industrial residues, attributed to their elevated oxygen percentage, leading to more reactive functional groups and greater combustion stability compared to agricultural residues. This information is pertinent for optimizing sugarcane residues utilization in energy applications.

Enhancing cellulosic digestibility of wheat straw by adding sodium lignosulfonate and sodium hydroxide to hydrothermal pretreatment

Surfactant-assisted pretreatment has been widely reported to improve the enzymatic hydrolysis of lignocellulose by promoting removal of xylan and lignin. Hence, this work innovatively proposed the use of sodium lignosulfonate (SL) as an additive of alkaline pretreatment (AP), and evaluated its influence on the cellulosic digestibility of wheat straw (WS). The results displayed that the maximum of 72-h cellulosic digestibility could reach 83.5% as 15 g/L SL was introduced to the AP process (SAP), while the cellulosic digestibility of hydrothermal and alkaline pretreated WS was only 63.6% and 70.2%, respectively. These increments were subsequently attributed to the improvement of 6.5% xylan and 26.8% lignin accelerated by SAP, resulting in positive changes in structural characteristics such as accessibility, specific surface area, and cellulosic crystalline structure. The utilization of lignin-based surfactants in pretreatment has realized the economic feasibility of lignocellulosic biorefining and broadened the application prospect of surfactants.

Lignin-grafted quaternary ammonium phosphate with temperature and pH responsive behavior for improved enzymatic hydrolysis and cellulase recovery

The cost of lignocellulosic enzymatic hydrolysis was reduced by enhancing enzymatic hydrolysis and recycling cellulase. Lignin-grafted quaternary ammonium phosphate (LQAP) with sensitive temperature and pH response, was obtained by grafting quaternary ammonium phosphate (QAP) onto enzymatic hydrolysis lignin (EHL). LQAP dissolved under the hydrolysis condition (pH 5.0, 50 °C) and enhanced the hydrolysis. After hydrolysis, LQAP and cellulase co-precipitated by the hydrophobic binding and electrostatic attraction, when lowering pH to 3.2, and cooling to 25 °C. LQAP had significant performances of pH-UCST response, enzymatic hydrolysis enhancement and cellulase recovery at the same time. When 3.0 g/L LQAP-100 was added to the system of corncob residue, SED@48 h increased from 62.6 % to 84.4 %, and 50 % of amount of cellulase was saved. Precipitation of LQAP at low temperature was mainly attributed to the salt formation of positive and negative ions in QAP; LQAP enhanced the hydrolysis for its ability to decrease the ineffective adsorption of cellulase by forming a hydration film on lignin and through the electrostatic repulsion. In this work, a lignin amphoteric surfactant with temperature response, was used to enhance hydrolysis and recover cellulase. This work will provide a new idea for reducing the cost of lignocellulose-based sugar platform technology, and high-value utilization of industrial lignin.

Production of 1,3-propanediol using enzymatic hydrolysate derived from pretreated distillers' grains

To minimize environmental pollution and waste of resources, distillers' grains (DG) was used to produce 1,3-propanediol. Biological, physical, and chemical methods were used for pretreatment. The correlation between features of pretreated samples and enzymatic digestibility was analyzed. The results showed that the glucan and xylan conversion of dilute sulfuric acid pretreated DG increased by 69.59% and 413.68%, respectively. The glucan conversion of microwave pretreated and xylan conversion of laccase pretreated DG increased by 14.22% and 34.19%, respectively. Pretreatment enhanced enzymatic digestibility through changing the dense structure and features of DG making them conductive to enzymatic hydrolysis. The production of 1,3-propanediol using enzymatic hydrolysate of pretreated DG and glycerol in shake-flask was 17 g/L. The utilization of DG not only provides plentiful raw materials replacing fossil fuels to produce biofuels and other chemicals but efficiently reduces environmental waste.

Analysis of Single-Step Pretreatments for Lignocellulosic Platform Isolation as the Basis of Biorefinery Design

Biorefinery feasibility is highly influenced by the early design of the best feedstock transformation pathway to obtain value-added products. Pretreatment has been identified as the critical stage in biorefinery design since proper pretreatment influences subsequent reaction, separation, and purification processes. However, many pretreatment analyses have focused on preserving and valorizing six-carbon sugars for future use in bioconversion processes, leaving aside fractions such as hemicellulose and lignin. To date, there has been no pretreatment systematization for the removal of lignocellulosic fractions. This work defines pretreatment efficacy through operational, economic, environmental, and social indicators. Thus, using the data reported in the literature, as well as the results of the simulation schemes, a multi-criteria weighting of the best-performing schemes for the isolation or removal of cellulose, hemicellulose, and lignin was carried out. As a main result, it was concluded that dilute acid is the most effective for cellulose isolation and hemicellulose removal for producing platform products based on six- and five-carbon sugars, respectively. Additionally, the kraft process is the best methodology for lignin removal and its future use in biorefineries. The results of this work help to elucidate a methodological systematization of the pretreatment efficacy in the design of biorefineries as an early feasibility stage considering sustainability aspects.

Facile fabrication of flexible AuNPs@CDA SERS substrate for enrichment and detection of thiram pesticide in water

Pesticide residues in water is one of the most serious problems in developing countries. Surface enhanced Raman spectroscopy (SERS) is widely used in the detection and monitoring of pesticide and other trace compounds because of its low limits of detection (LODs). However, different SERS substrate synthesis methods have different economic benefits and environmental impacts. In this paper, a flexible AuNPs@CDA SERS substrate was fabricated by the gold nanoparticles (AuNPs) and the biomass-based cellulose diacetate (CDA), which had stable test performance and considerable LODs. The substrates were economically viable and environment friendly. The characterization analysis of the substrate allows us to flexibly select different test methods (drop-test or enrichment-test) as coping strategy in different situation. The results showed that the LODs of thiram pesticide in water by enrichment-test could reach 10^-7 g/mL, and had a good linear relationship in the concentration range of 10^-7-10^-6 g/mL. This strategy can realize the rapid and effective detection and monitoring of thiram pesticide in water.

Enzymatic hydrolysis of low temperature alkali pretreated wheat straw using immobilized β-xylanase nanoparticles

A low temperature alkali (LTA) pretreatment method was used to treat wheat straw. In order to obtain good results, different factors like temperature, incubation time, NaOH concentration and solid to liquid ratio for the pretreatment process were optimized. Wheat straw is a potential biomass for the production of monomeric sugars. The objective of the current study was to observe the saccharification (%) of wheat straw with immobilized magnetic nanoparticles (MNPs). For this purpose, immobilized MNPs of purified β-xylanase enzyme was used for hydrolysis of pretreated wheat straw. Wheat straw was pretreated using the LTA method and analyzed by SEM analysis. After completion of the saccharification process, saccharification% was calculated by using a DNS method. Scanning electron micrographs revealed that the hemicellulose, cellulose and lignin were partially removed and changes in the cell wall structure of the wheat straw had caused it to become deformed, increasing the specific surface area, so more fibers of the wheat straw were exposed to the immobilized β-xylanase enzyme after alkali pretreatment. The maximum saccharification potential of wheat straw was about 20.61% obtained after pretreatment with optimized conditions of 6% NaOH, 1/10 S/L, 30 °C and 72 hours. Our results indicate the reusability of the β-xylanase enzyme immobilized magnetic nanoparticles and showed a 15% residual activity after the 11th cycle. HPLC analysis of the enzyme-hydrolyzed filtrate also revealed the presence of sugars like xylose, arabinose, xylobiose, xylotriose and xylotetrose. The time duration of the pretreatment has an important effect on thermal energy consumption for the low-temperature alkali method.

Optimization of alkali pretreatment and enzymatic saccharification of jute (Corchorus olitorius L.) biomass using response surface methodology

Reduction of inherent structural recalcitrance and improved saccharification efficiency are two important facets to enhance fermentable sugar yield for bioethanol production from lignocellulosic biomass. This study optimized alkaline pretreatment and saccharification conditions employing response surface methodology to improve saccharification yield of jute (Corchorus olitorius cv. JROB-2) biomass. The biomass is composed of cellulose (66.6 %), lignin (19.4 %) and hemicellulose (13.1 %). NaOH concentration exhibited significant effect on delignification during pretreatment. The highest delignification (80.42 %) was obtained by pretreatment with 2.47 % NaOH at 55.8 °C for 5.9 h removing 79.8 % lignin and 34.2 % hemicellulose from biomass, thereby increasing cell wall porosity and allowing better accessibility to saccharification enzyme. During saccharification optimization, significant effect was observed for biomass loading, enzyme concentration and temperature. Optimized saccharification condition yielded maximum saccharification (76.48 %) when hydrolysis was performed at 6.9 % biomass loading with enzyme concentration of 49.52 FPU/g substrate at 51.05 °C for 74.46 h.

Enzymes and enzymatic mechanisms in enzymatic degradation of lignocellulosic biomass: A mini-review

Enzymatic hydrolysis is the key step limiting the efficiency of the biorefinery of lignocellulosic biomass. Enzymes involved in enzymatic hydrolysis and their interactions with biomass should be comprehended to form the basis for looking for strategies to improve process efficiency. This article updates the contemporary research on the properties of key enzymes in the lignocellulose biorefinery and their interactions with biomass, adsorption, and hydrolysis. The advanced analytical techniques to track the interactions for exploiting mechanisms are discussed. The challenges and prospects for future research are outlined.

PACER: a novel 3D plant cell wall model for the analysis of non-catalytic and enzymatic responses

Background

Substrate accessibility remains a key limitation to the efficient enzymatic deconstruction of lignocellulosic biomass. Limited substrate accessibility is often addressed by increasing enzyme loading, which increases process and product costs. Alternatively, considerable efforts are underway world-wide to identify amorphogenesis-inducing proteins and protein domains that increase the accessibility of carbohydrate-active enzymes to targeted lignocellulose components.

Results

We established a three-dimensional assay, PACER (plant cell wall model for the analysis of non-catalytic and enzymatic responses), that enables analysis of enzyme migration through defined lignocellulose composites. A cellulose/azo-xylan composite was made to demonstrate the PACER concept and then used to test the migration and activity of multiple xylanolytic enzymes. In addition to non-catalytic domains of xylanases, the potential of loosenin-like proteins to boost xylanase migration through cellulose/azo-xylan composites was observed.

Conclusions

The PACER assay is inexpensive and parallelizable, suitable for screening proteins for ability to increase enzyme accessibility to lignocellulose substrates. Using the PACER assay, we visualized the impact of xylan-binding modules and loosenin-like proteins on xylanase mobility and access to targeted substrates. Given the flexibility to use different composite materials, the PACER assay presents a versatile platform to study impacts of lignocellulose components on enzyme access to targeted substrates.

Properties and Hydrolysis Behavior of Celluloses of Different Origin

The present paper is a fundamental study on the physicochemical properties and hydrolysis behavior of cellulose samples differing in origin: bacterial, synthetic, and vegetal. Bacterial cellulose was produced by Medusomyces gisevii Sa-12 in an enzymatic hydrolyzate derived from oat-hull pulp. Synthetic cellulose was obtained from an aqueous glucose solution by electropolymerization. Plant-based cellulose was isolated by treatment of Miscanthus sacchariflorus with dilute NaOH and HNO₃ solutions. We explored different properties of cellulose samples, such as chemical composition, degree of polymerization (DP), degree of crystallinity (DC), porosity, and reported infrared spectroscopy and scanning electron microscopy results. The hydrolysis behavior was most notable dependent on the origin of cellulose. For the bacterial cellulose sample (2010 DP, 90% DC, 89.4% RS yield), the major property affecting the hydrolysis behavior was its unique nanoscale reticulate structure promoting fast penetration of cellulases into the substrate structure. The study on enzymatic hydrolysis showed that the hydrolysis behavior of synthetic and Miscanthus celluloses was most influenced by the substrate properties such as DP, DC and morphological structure. The yield of reducing sugars (RS) by hydrolysis of synthetic cellulose exhibiting a 3140 DP, 80% DC, and highly depolymerization-resistant fibers was 27%. In contrast, the hydrolysis of Miscanthus-derived cellulose with a 1030 DP, 68% DC, and enzyme-accessible fibers provided the highest RS yield of 90%. The other properties examined herein (absence/presence of non-cellulosic impurities, specific surface, pore volume) had no considerable effect on the bioconversion of the cellulosic substrates.

Comparison of various delignification/desilication pre-treatments and indigenous fungal cellulase for improved hydrolysis of paddy straw

The efficient removal of lignin and silica from paddy straw is essential for its volarization into biofuels and other value-added products. In this work, different chemical pre-treatments viz. acid/alkali, organosolv and deep eutectic solvents were carried out to assess the extent of delignification and desilication of paddy straw. Maximum lignin and silica removal of 96.08 and 95.51% was observed with two step acid (0.5% sulphuric acid) followed by alkali (4% sodium hydroxide) pre-treatment with significantly low total lignin (2.30%) and silica content (0.80%) of the treated straw residue. The treated straw residue contained significantly high holocellulose (91.65%), cellulose (75.01%) and hemicellulose content (16.64%). Among the four indigenous fungal isolates, Penicillium mallochii (JS17) cellulase showed better accessibility for the treated straw residue with maximum release of 504.18 mg g^-1 of reducing sugars and saccharification efficiency of 56.90%. The two-step acid/alkali pre-treatment of paddy straw was highly effective for removing lignin and silica from paddy straw, thereby, resulting in enhanced enzymatic accessibility of the substrate and more efficient hydrolysis of cellulose into fermentable sugars.

A perspective on the combination of alkali pre-treatment with bioaugmentation to improve biogas production from lignocellulose biomass

Anaerobic digestion (AD) is a bioprocess technology that integrates into circular economy systems, which produce renewable energy and biofertilizer whilst reducing greenhouse gas emissions. However, improvements in biogas production efficiency are needed in dealing with lignocellulosic biomass. The state-of-the-art of AD technology is discussed, with emphasis on feedstock digestibility and operational difficulty. Solutions to these challenges including for pre-treatment and bioaugmentation are reviewed. This article proposes an innovative integrated system combining alkali pre-treatment, temperature-phased AD and bioaugmentation techniques. The integrated system as modelled has a targeted potential to achieve a biodegradability index of 90% while increasing methane production by 47% compared to conventional AD. The methane productivity may also be improved by a target reduction in retention time from 30 to 20 days. This, if realized has the potential to lower energy production cost and the levelized cost of abatement to facilitate an increased resource of sustainable commercially viable biomethane.

Production of Lignocellulolytic Enzymes and Phenolic Compounds by Lentinus strigosus from the Amazon Using Solid-State Fermentation (SSF) of Guarana (Paullinia cupana) Residue

The Amazon rainforest has a rich biodiversity, and studies of Basidiomycete fungi that have biomolecules of biotechnological interest are relevant. The use of lignocellulosic biomass in biotechnological processes proposes an alternative use, and also adds value to the material when employed in the bioconversion of agro-industrial waste. In this context, this study evaluate the production of lignocellulolytic enzymes (carboxymethylcellulases (CMCase), xylanase, pectinase, laccase) as well as phenolic compounds and proteases by solid-state fermentation (SSF) using the fungus Lentinus strigosus isolated from Amazon. The guarana (Paullinia cupana) residue was characterized using scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FTIR). SSF was carried out with 60% humidification of the residue, at 30 °C, for 10 days. The lignocellulosic biomass presented fragmented structures with irregular shapes and porosities, and was mainly constituted by cellulose (19.16%), hemicellulose (32.83%), and lignin (6.06%). During the SSF, significant values of CMCase (0.84 U/g) on the 8th day, xylanase (1.00 U/g) on the 7th day, pectinase (2.19 U/g) on the 6th day, laccase (176.23 U/mL) on the 5th day, phenolic compounds (10.27 μg/mL) on the 1st day, soluble proteins (0.08 mg/mL) on the 5th day, and protease (8.30 U/mL) on the 6th day were observed. In general, the agro-industrial residue used provided promising results as a viable alternative for use as a substrate in biotechnological processes.

Combination strategy of laccase pretreatment and rhamnolipid addition enhance ethanol production in simultaneous saccharification and fermentation of corn stover

The effects of laccase pretreatment and surfactant addition in the simultaneous saccharification and fermentation (SSF) of corn stover by engineered Saccharomyces cerevisiae were studied. Surfactants Tween-80, tea saponin and rhamnolipid improved ethanol production in SSF, among which the biosurfactant rhamnolipid reached the highest ethanol yield. At the 6 d in SSF, the ethanol content of addition rhamnolipid of laccase pretreatment corn stover (Lac-CS) and Lac-CS reached 0.73 g/L and 0.56 g/L, which was 2.32 folds and 1.54 folds higher than the control of 0.22 g/L, respectively. These findings suggested that the combination of laccase pretreatment and rhamnolipid addition further improve ethanol production. GC-MS, composition of corn stover, protein concentration of supernatant and glucose content studies were executed to explore the mechanism of combination strategy of laccase pretreatment and rhamnolipid addition enhance ethanol production. This study provides guidance for the application of laccase and surfactant in bioethanol production.

Pretreatment Affects Profits From Xylanase During Enzymatic Saccharification of Corn Stover Through Changing the Interaction Between Lignin and Xylanase Protein

Effective pretreatment is vital to improve the biomass conversion efficiency, which often requires the addition of xylanase as an accessory enzyme to enhance enzymatic saccharification of corn stover. In this study, we investigated the effect of two sophisticated pretreatment methods including ammonium sulfite (AS) and steam explosion (SE) on the xylanase profits involved in enzymatic hydrolysis of corn stover. We further explored the interactions between lignin and xylanase Xyn10A protein. Our results showed that the conversion rates of glucan and xylan in corn stover by AS pretreatment were higher by Xyn10A supplementation than that by SE pretreatment. Compared with the lignin from SE pretreated corn stover, the lignin from AS pretreated corn stover had a lower Xyn10A initial adsorption velocity (13.56 vs. 10.89 mg g⁻¹ min⁻¹) and adsorption capacity (49.46 vs. 27.42 mg g⁻¹ of lignin) and weakened binding strength (310.6 vs. 215.9 L g⁻¹). Our study demonstrated the low absolute zeta potential and strong hydrophilicity of the lignin may partly account for relative weak interaction between xylanase protein and lignin from AS pretreated corn stover. In conclusion, our results suggested that AS pretreatment weakened the inhibition of lignin to enzyme, promoted the enzymatic hydrolysis of corn stover, and decreased the cost of enzyme in bioconversion.

Synthesis of functional dicationic ionic liquids for the treatment of lignocellulosic biomass

Mono-cationic ionic liquids (MILs) have been widely utilized for the treatment of lignocelluloses. However, the hydrophilic property of MILs increases the difficulty of isolating sugars and their reuse, which limits their industrial application. In the present study, a series of dicationic ionic liquids (DILs) were synthesized with totally different di-cations and di-anions. An alternating miscibility of DILs with water was observed depending on the dealing temperature. The functional DILs exhibiting hydrophobic and acidic properties were investigated for the treatment of corn stalk. High yields of sugars were achieved as 27.8% and 31.6% with DIL3 and DIL4, respectively. Cellulosic materials were obtained as 74.3% and 77.8% with DIL1 and DIL2 and 61.2% and 65.7% with DIL3 and DIL4, respectively. Enzymatic reaction was successfully performed with cellulosic materials after the DIL treatment. DILs were recycled and reused with no significant reduction in sugar yields. Hydrophobic DILs are a potentially effective approach to enable the successful decomposition and degradation of lignocellulosic biomass.

Mono-cationic ionic liquids (MILs) have been widely utilized for the treatment of lignocelluloses.

Revealing the influence of metallic chlorides pretreatment on chemical structures of lignin and enzymatic hydrolysis of waste wheat straw

The addition of various metallic chlorides in pretreatment of lignocellulose have been widely reported to improve cellulose conversion via cellulolytic processing. However, the interaction mechanism between lignin and metallic cations is not well known. In this work, pretreatment with different concentrations of FeCl₃ and AlCl₃ were performed upon waste wheat straw to enhance enzymatic hydrolysis efficiency. Results showed that pretreatment with FeCl₃ and AlCl₃ could facilitate the enzymatic hydrolysis efficiency increasing from 50.4% to 82.9% and 76.6%, which was attributed to the enhancement of xylan removal by 33.8% (FeCl₃) and 36.5% (AlCl₃), respectively. Meanwhile, the surface charge, hydrophobicity, and protein adsorption capacity of lignin from waste wheat straw can be decreased by 3.3 mV, 0.6 L/g, 7.6 mg/g (FeCl₃). This was due to the depolymerization of lignin in metallic chlorides pretreatment. These findings will be used to further evaluate the effect of metallic chlorides in biorefinery pretreatment.

Ultrastructural change in lignocellulosic biomass during hydrothermal pretreatment

In recent years, visualization and characterization of lignocellulose at different scales elucidate the modifications of its ultrastructural and chemical features during hydrothermal pretreatment which include degradation and dissolving of hemicelluloses, swelling and partial hydrolysis of cellulose, melting and redepositing a part of lignin in the surface. As a result, cell walls are swollen, deformed and de-laminated from the adjacent layer, lead to a range of revealed droplets that appear on and within cell walls. Moreover, the certain extent morphological changes significantly promote the downstream processing steps, especially for enzymatic hydrolysis and anaerobic fermentation to bioethanol by increasing the contact area with enzymes. However, the formation of pseudo-lignin hinders the accessibility of cellulase to cellulose, which decreases the efficiency of enzymatic hydrolysis. This review is intended to bridge the gap between the microstructure studies and value-added applications of lignocellulose while inspiring more research prospects to enhance the hydrothermal pretreatment process.

Cellulose induced protein 1 (Cip1) from Trichoderma reesei enhances the enzymatic hydrolysis of pretreated lignocellulose

Background

Trichoderma reesei is currently the main strain for the commercial production of cellulase. Cellulose induced protein 1 (Cip1) is one of the most abundant proteins in extracellular proteins of T. reesei. Reported literatures about Cip1 mainly focused on the regulation of Cip1 and its possible enzyme activities, but the effect of Cip1 on the enzymatic hydrolysis of lignocellulose and possible mechanism have not still been reported.

Results

In this study, Cip1 from T. reesei was cloned, expressed and purified, and its effects on enzymatic hydrolysis of several different pretreated lignocellulose were investigated. It was found that Cip1 could promote the enzymatic hydrolysis of pretreated lignocellulose, and the promoting effect was significantly better than that of bovine serum albumin (BSA). And especially for the lignocellulosic substrate with high lignin content such as liquid hot water pretreated corn stover and corncob residue, the promoting effect of Cip1 was even better than that of the commercial cellulase when adding equal amount protein. It was also showed that the metal ions Zn²⁺ and Cu²⁺ influenced the promoting effect on enzymatic hydrolysis. The Cip1 protein had no lyase activity, but it could destroy the crystal structure of cellulose and reduce the non-productive adsorption of cellulase on lignin, which partly interpreted the promoting effect of Cip1 on enzymatic hydrolysis of lignocellulose.

Conclusion

The Cip1 from T. reesei could significantly promote the enzymatic hydrolysis of pretreated lignocellulose, and the promotion of Cip1 was even higher than that of commercial cellulase in the enzymatic hydrolysis of the substrates with high lignin content. This study will help us to better optimize cellulase to improve its ability to degrade lignocellulose, thereby reducing the cost of enzymes required for enzymatic hydrolysis.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12934-021-01625-z.

Comparative transcriptome analysis of Trichoderma reesei reveals different gene regulatory networks induced by synthetic mixtures of glucose and β-disaccharide

The mixture of glucose and β-disaccharide (MGD) synthesized by transglycosylation of glucose as a low-cost soluble carbon source can efficiently induce cellulase production in Trichoderma reesei, which holds potential for the biorefining of lignocellulosic biomass. However, it is not yet fully understood how MGD induces T. reesei cellulase. In this study, transcriptomic analyses were conducted to investigate the molecular basis of MGD for lignocellulose-degrading enzyme production of T. reesei Rut C30 compared with that on lactose. Particular attention was paid to CAZymes, transcription factors, transporters and other protein processing pathways related to lignocellulose degradation. As a result, MGD can elicit transcription of GH5-, GH6- and GH7-encoding cellulases that is up to 1.4-fold higher than that induced by lactose, but GH11- and GH74-encoding xylanases are downregulated by 1.7- and 4.4-fold, respectively. Gene expression profiles suggest that the transcription activators xyr1 and vib1 are significantly upregulated and that the mitogen-activated protein kinase pathway is strengthened compared to the case of lactose induction. In addition, hac1-encoding UPR-specific transcription factors are significantly upregulated by MGD, which may be enhanced due to proper folding and processing of nascent proteins. These findings provide a theoretical basis for further understanding the characterization of efficient cellulase production using MGD as an inducer in T. reesei and offer potential strategies for strain improvement.

Fiber degradation and carbohydrate production by combined biological and chemical/physicochemical pretreatment methods of lignocellulosic biomass - A review

Sustainable biorefinery concepts based on lignocellulosic biomass are gaining worldwide research interest because of their inexpensiveness and abundance. The recalcitrance of lignocellulosic biomass poses a major hindrance to enhance biofuel production. Therefore, a pretreatment step is critical to prepare the substrates for the downstream process. Combining pretreatment steps help to lower the severity of the drawbacks of a single pretreatment step. This paper systematically reviews the combined biological and chemical/physicochemical pretreatment based on fiber degradation and sugar yield. An energy-efficient biological pretreatment method combined with a chemical pretreatment that accelerates the pretreatment times has been seen to be efficient for fiber degradation and sugar yields. However, fungal species, culture conditions, biomass type, the severity of chemical pretreatment and the order of sequential pretreatment influences the relative component contents and sugar yield. Even the same biomass from different sources undergoing similar pretreatment conditions could result in a varying amount of digestibility.

Features correlated to improved enzymatic digestibility of corn stover subjected to alkaline hydrogen peroxide pretreatment

As one of the leading pretreatment approaches, alkaline hydrogen peroxide (AHP) pretreatment can enhance the enzymatic digestibility of lignocellulose significantly. In this study, the glucan conversion of AHP pretreated corn stover (CS) without and with water-wash were 28.4% and 50.0% higher than that of raw material, respectively. In order to systematically understand its mechanism, analyses of the features of AHP pretreated and raw CS, such as specific surface area, crystallinity, zeta potential, water holding capacity and swelling capacity and others were performed. The weight-average molecular weight (Mw) of the sugars in the hydrolysate and the particle size distribution of the hydrolysis residue were also analyzed. These results explained why AHP-CS was more conducive to enzymatic hydrolysis. The deeper reason was that the removal of lignin and the destruction of hydrogen bonds within cellulose and hemicellulose increased the accessibility of cellulose and reduced the non-productive adsorption of cellulase, which significantly improved the enzymatic digestibility.

Structural and Morphological Analysis of Cellulose Pulp Produced from the Fractionation of Eucalyptus obliqua Sawdust Using γ-Valerolactone

Organic solvents offer promising methods for the fractionation of Eucalyptus obliqua lignocellulosic biomass. This study investigated the impact of γ-valerolactone (GVL) fractionation on the morphology of cellulose and its internal structure using scanning electron microscopy (SEM), nuclear magnetic resonance (NMR) and Fourier-transform infrared (FT-IR) spectroscopy. The solubilized lignin precipitated on the macrofibril surface as lignin spheres. GVL fractionation significantly increased the crystallinity of the recovered pulps from 0.29 for the sawdust to an average of 0.53 and a maximum of 0.66. The main states of cellulose that were susceptible to hydrolysis during the fractionation were amorphous and surface cellulose, both of which were reduced significantly, while paracrystalline and pure crystalline fractions in the pulp increased. It was concluded that GVL fractionation can produce a crystalline cellulose pulp of high quality suitable for further processing.

Surface-Related Kinetic Models for Anaerobic Digestion of Mi-crocrystalline Cellulose: The Role of Particle Size

In this work, for modelling the anaerobic digestion of microcrystalline cellulose, two surface-related models based on cylindrical and spherical particles were developed and compared with the first-order kinetics model. A unique dataset consisting of particles with different sizes, the same crystallinity and polymerisation degree was used to validate the models. Both newly developed models outperformed the first-order kinetics model. Analysis of the kinetic constant data revealed that particle size is a key factor determining the anaerobic digestion kinetics of crystalline cellulose. Hence, crystalline cellulose particle size should be considered in the development and optimization of lignocellulose pre-treatment methods. Further research is necessary for the assessment of impact of the crystalline cellulose particle size and surface properties on the microbial cellulose hydrolysis rate.

Sodium hydroxide catalytic ethanol pretreatment and surfactant on the enzymatic saccharification of sugarcane bagasse

The effect of NaOH catalytic ethanol pretreatment under various temperatures (130-180 °C) and time (15-90 min) on the chemical composition and enzymatic saccharification of sugarcane bagasse was investigated in this study. The results showed that NaOH catalytic ethanol pretreatment assisted delignification and the reservation of cellulose and hemicellulose. When sugarcane bagasse was pretreated at 180 °C for 30 min, a substantial glucose yield of 91.6% was obtained after hydrolysis for 72 h, representing 94.6% of glucose in pretreated residue. This yield was promoted with respect to the compositional change and surface alteration of pretreated substrate. With the supplement of Tween 80, the enzyme usage would be saved by 50% and the enzymolysis time could be shortened to 24 h while obtaining comparable glucose yield. This study provided an economical feasible and gradual process for the generation of glucose, which was followed by fermentation and conversion to platform chemicals.

The effects of solid lignin on the anaerobic digestion of microcrystalline cellulose and application of smoothing splines for extended data analysis of its inhibitory effects

Lignocellulose is an abundant substrate for biogas production; however, for efficient utilization, proper pre-treatment is required to enhance the biomethane yield and hydrolysis rate significantly. Phenolic compounds from dissolved lignin, produced during alkali pre-treatment, have inhibitory effects on the anaerobic digestion; however, the possible inhibitory effects of solid lignin have not gathered enough interest. Especially, the effect of solid lignin on methanogenesis remains a knowledge gap. In this study, kraft lignin was used as a model solid lignin substrate for its co-digestion with microcrystalline cellulose. A new approach of modelling biomethane production curves using smoothing splines was developed to describe the long-term inhibitory effects of solid lignin on hydrolysis and methanogenesis. The method gives possibility to describe long-term inhibitory effects by using batch instead of continuous test data. Results revealed that kraft lignin showed mild inhibitory effects on methanogens. However lignin impact combined with volatile fatty accumulation can prolong hydrolysis and reactor recovery start-up by 47.3% and 75.3%, respectively. For small dosages of solid lignin adaptation of methanogens is possible.

Evaluation of a novel pretreatment of NaOH/Urea at outdoor cold-winter conditions for enhanced enzymatic conversion and hythane production from rice straw

A novel pretreatment using NaOH/Urea (NU) solution at outdoor cold-winter conditions was developed to enhance the enzymatic saccharification and hythane production from rice straw (RS). Results revealed that the reducing sugar conversion of RS reached 90.02% after NU pretreatment at outdoor freezing temperature. Chemical composition analysis showed that the lignin removal was up to 62.74% with cellulose and hemicellulose loss of 0.56% and 18.87% after 3%-6% NU pretreatment at 100% solid loading for 3 months. Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS) analysis confirmed that the surface of pretreated RS exposed more cellulose and hemicellulose due to the disruption of resistant structure of lignocellulose. Subsequently, the enzymatic hydrolysate of pretreated RS was used as substrate to produce hythane by two-stage fermentation with the yield of 225.1 mL H₂/g sugar and 112.8 mL CH₄/g sugar. The energy conversion efficiency of hythane fermentation attained 10.4%, which was 22.8% and 190.5% higher than that for single H₂ and CH₄ fermentation. These results demonstrated that NU pretreatment at outdoor cold-winter conditions was practically and feasible way for improved hythane recovery from lignocellulosic biomass.

Effect of sequential pretreatment combinations on the composition and enzymatic hydrolysis of hazelnut shells

Hazelnut shells, a high lignin containing biomass, were subjected to individual and sequential liquid hot water (LHW), alkaline (AP) and dilute acid pretreatments (DAP). Among the single pretreatments, LHW demonstrated the highest cellulose recovery of 98.1%, DAP resulted in the highest hemicellulose solubilization of 56.0%, and AP of the highest lignin removal of 49.6%. Employing two-step pretreatment on hazelnut shells, in general, demonstrated an enhanced action of the second pretreatment; therefore, the sequence of the pretreatment methods had a significant impact on both substrate characteristics and enzymatic hydrolysis efficiency of biomass. In terms of delignification, AP-LHW achieved 60.7% lignin removal, while LHW-DAP showed the highest hemicellulose removal of 93.8% and DAP-LHW resulted in the highest cellulose recovery of 94.0%. Structural properties of raw and pretreated hazelnut shells were observed by FTIR. The maximum glucose recovery of 54.9% was observed in DAP-LHW pretreated samples. For this pretreatment combination, almost 1.8 MJ total energy was required to recover 10.2 g glucose. The findings indicated that complete removal of the physical barrier of lignin and hemicellulose might not be essential; partial relocation of lignin and alteration of cellulose structure may also be efficient in increasing the sugar recovery from the lignocellulosic biomass.

Eco-friendly nanocellulose and its biomedical applications: current status and future prospect

Cellulose is the earth's leading natural polymer. It is known for its properties like biocompatibility, high mechanical strength, cost-effectiveness and lightweight. Nanocellulose displays better properties as compared to the native cellulose fibre. The nanocellulose is very remunerative in the arenas of routine application especially in health care, food industry, sanitary products and many more. In the biomedical area, cellulose-based products are utilized in applications like wound healing, dental applications, drug delivery, antimicrobial material, etc. Nanocellulose biomaterials have been commercialised, representing the material of new generation. With the objective to comprehend the contribution of nanocellulose in the current status and future development in biomedical utilisations, the review is focused on cellulose, nanocellulose, types and sources of nanocellulose, its preparation, characteristics, constraints related to its composites through the analysis of certain scientific reports.

A Simplified Method of Synthesis to Obtain Zwitterionic Cellulose under Mild Conditions with Active Ionic Moieties

A simplified procedure to synthesize zwitterionic cellulose by means of N-protected aspartic anhydride under mild conditions was developed. The preparation of modified cellulose samples was carried out under heterogeneous, aqueous conditions by reacting NH₄OH-activated cellulose with aspartic anhydrides N-protected with trifluoroacetyl (TFAc) and carbobenzyloxy (Cbz). Modified cellulose samples Cel-Asp-N-TFAc and Cel-Asp-N-Cbz were characterized by Fourier Transform Infrared (FTIR) and ¹³C solid state Nuclear Magnetic Resonance (NMR) spectroscopy. The functionalization degree of each cellulose sample was determined by the ¹³C NMR signal integration values corresponding to the cellulose C1 vs. the Cα of the aspartate residue and corroborated by elemental analysis. In agreement, both analytical methods averaged a grafting degree of 20% for Cel-Asp-N-TFAc and 16% for Cel-Asp-N-Cbz. Conveniently, Cel-Asp-N-TFAc was concomitantly partially N-deprotected (65%) as determined by the ninhydrin method. The zwitterion character of this sample was confirmed by a potentiometric titration curve and the availability of these amino acid residues on the cellulose was inspected by adsorption kinetics method with a 100 mg L⁻¹ cotton blue dye solution. In addition, the synthesis reported in the present work involves environmentally related advantages over previous methodologies developed in our group concerning to zwitterionic cellulose preparation.

Anaerobic Co-Digestion of Cheese Whey and Industrial Hemp Residues Opens New Perspectives for the Valorization of Agri-Food Waste

Cheese whey (CW) and hemp hurds (HH) represent typically overabundant biowastes of food and agricultural production, and their circular management is crucial to improve both sustainability and profitability of the agri-food chain. By combining experimental biochemical methane potential (BMP) tests and literature data, the techno-economic aspects of a possible future bioenergy valorization of CW and HH through anaerobic digestion (AD) and co- digestion (coAD) were analyzed. Along the 42-days, BMP assays, CW, and HH alone rendered BMP values of 446 ± 66 and 242 ± 13 mL CH4·g VS−1, respectively. The application of coAD with CW and HH at a 70:30 ratio allowed to enhance the biomethane production by 10.7%, as compared to the corresponding calculated value. In terms of economic profitability, the valorization of HH as biomethane in a dual-purpose hemp cultivation could potentially enable net profits of up to 3929 €·ha−1, which could rise to 6124 €·ha−1 in case of coAD with CW. Finally, by projecting the biomethane potential from current and future available CW and HH residues in the national context of Italy, a total biomethane yield of up to 296 MNm3·y−1 could be attained, offering interesting perspectives for the sustainability of key sectors such as transportation.

Determination of Various Parameters during Thermal and Biological Pretreatment of Waste Materials

Pretreatment of waste materials could help in more efficient waste management. Various pretreatment methods exist, each one having its own advantages and disadvantages. Moreover, a certain pretreatment technique might be efficient and economical for one feedstock while not for another. Thus, it is important to analyze how parameters change during pretreatment. In this study, two different pretreatment techniques were applied: thermal at lower and higher temperatures (38.6 °C and 80 °C) and biological, using cattle rumen fluid at ruminal temperature (≈38.6 °C). Two different feedstock materials were chosen: sewage sludge and riverbank grass (Typha latifolia), and their combinations (in a ratio of 1:1) were also analyzed. Various parameters were analyzed in the liquid phase before and after pretreatment, and in the gas phase after pretreatment. In the liquid phase, some of the parameters that are relevant to water quality were measured, while in the gas phase composition of biogas was measured. The results showed that most of the parameters significantly changed during pretreatments and that lower temperature thermal and/or biological treatment of grass and sludge is suggested for further applications.

Comparative evaluation of biochemical methane potential of various types of Ugandan agricultural biomass following soaking aqueous ammonia pretreatment

The feasibility of pretreatment involving soaking in aqueous ammonia (SAA) for the anaerobic digestion (AD) of eight different types of agricultural biomass of Ugandan origin was investigated. Moderate pretreatment temperatures of 60 and 90 °C were employed, and the NH₃ concentration, solid-to-liquid ratio, and pretreatment time were fixed at 15.0% (w/w), 1:6, and 6 h, respectively. The delignification efficiencies of the SAA pretreatment ranged from 51.1 to 76.6%, and the maximum value was observed for maize bran pretreated at 90 °C. Biochemical methane potential experiments proved that the breaking of the complex bonds of lignin made fermentable sugars easily accessible to microorganisms. In all cases, the SAA pretreatment enhanced the methane potential of the eight types of Ugandan biomass compared with its untreated counterparts. The pretreated maize bran exhibited the highest methane yield of 291.5 mL CH₄/g COD, which is 83.1% of the theoretical conversion. SAA followed by AD is useful for employing Ugandan agricultural biomass as a renewable energy source.

Pretreatment strategies for enhanced biogas production from lignocellulosic biomass

The inclusion of a pretreatment step in anaerobic digestion processes increases the digestibility of lignocellulosic biomass and enhances biogas yields by promoting lignin removal and the destruction of complex biomass structures. The increase in surface area enables the efficient interaction of microbes or enzymes, and a reduction in cellulose crystallinity improves the digestion process under anaerobic conditions. The pretreatment methods may vary based on the type of the lignocellulosic biomass, the nature of the subsequent process and the overall economics of the process. An improved biogas production by 1200% had been reported when ionic liquid used as pretreatment strategy for anaerobic digestion. The different pretreatment techniques used for lignocellulosic biomasses are generally grouped into physical, chemical, physicochemical, and biological methods. These four modes of pretreatment on lignocellulosic biomass and their impact on biogas production process is the major focus of this review article.

A mechanism for efficient cadmium phytoremediation and high bioethanol production by combined mild chemical pretreatments with desirable rapeseed stalks

Cadmium (Cd) is one of the most hazardous trace metals, and rapeseed is a major oil crop over the world with considerable lignocellulose residues applicable for trace metal phytoremediation and cellulosic ethanol co-production. In this study, we examined that two distinct rapeseed cultivars could accumulate Cd at 72.48 and 43.70 ug/g dry stalk, being the highest Cd accumulation among all major agricultural food crops as previously reported. The Cd accumulation significantly increased pectin deposition as a major factor for trace metal association with lignocellulose. Meanwhile, the Cd-accumulated rapeseed stalks contained much reduced wall polymers (hemicellulose, lignin) and cellulose degree of polymerization, leading to improved lignocellulose enzymatic hydrolysis. Notably, three optimal chemical pretreatments were performed for enhanced biomass enzymatic saccharification and bioethanol production by significantly increasing cellulose accessibility and lignocellulose porosity, along with a complete Cd release for collection and recycling. Hence, this study proposed a mechanism model interpreting why rapeseed stalks are able to accumulate much Cd and how the Cd-accumulated stalks are of enhanced biomass saccharification. It has also provided a powerful technology for both cost-effective Cd phytoremediation and value-added bioethanol co-production with minimum waste release.

Methods for the Evaluation of Industrial Mechanical Pretreatments before Anaerobic Digesters

Different methods were tested to evaluate the performance of a pretreatment before anaerobic digestion. Besides conventional biochemical parameters, such as the biochemical methane potential (BMP), the methane production rate, or the extent of solubilization of organic compounds, methods for physical characterization were also developed in the present work. Criteria, such as the particle size distribution, the water retention capacity, and the rheological properties, were thus measured. These methods were tested on samples taken in two full-scale digesters operating with cattle manure as a substrate and using hammer mills. The comparison of samples taken before and after the pretreatment unit showed no significant improvement in the methane potential. However, the methane production rate increased by 15% and 26% for the two hammer mills, respectively. A relevant improvement of the rheological properties was also observed. This feature is likely correlated with the average reduction in particle size during the pretreatment operation, but these results needs confirmation in a wider range of systems.

Evaluation of squeezing pretreatment for improving methane production from fresh banana pseudo-stems

Banana pseudo-stems (BPS) are an abundant and low-lignin-content lignocellulosic biomass for methane production. However, the high-water content in BPS increases the transport costs, and the resistant structure of BPS hinders methane production. In this study, squeezing of BPS as a pretreatment was evaluated for improving anaerobic digestion (AD). After 20-d digestion, methane production from squeezed BPS was 204.2 ± 6.2 mL/(g volatile solids (VS) of feedstock), which was 41.2% more than that from untreated BPS. This increase was mainly attributed to the improvement of physical properties (e.g. water absorbing capacity) and the change in the resistant structure of BPS after squeezing, which promoted good contact between microbes and substrate during AD. The measured methane production was described using a modified Gompertz model and the results showed that anaerobic process would take less time and occur faster when pretreated BPS was used as the substrate. The energy produced during AD of squeezed BPS, after deducting the energy used by the squeezer, resulted in an energy surplus of 26.2%.

Integrating Benzenesulfonic Acid Pretreatment and Bio-Based Lignin-Shielding Agent for Robust Enzymatic Conversion of Cellulose in Bamboo

A hydrotrope-based pretreatment, benzenesulfonic acid (BA) pretreatment, was used to fractionate bamboo in this work. With optimized content (80 wt %) of BA in pretreatment liquor, about 90% of lignin and hemicellulose could be removed from bamboo under mild conditions (95 °C, 30 min or 80 °C, 60 min). The potential accessibility of BA pretreated substrate to cellulase was thus significantly improved and was also found to be much higher than those of acidic ethanol and dilute acid pretreatments. But the deposition of lignin on the surface of solid substrates, especially the BA pretreated substrate, was also observed, which showed a negative effect on the enzymatic hydrolysis efficiency. The addition of inexpensive soy protein, a bio-based lignin-shielding agent, could readily overcome this negative effect, leading the increase of enzymatic conversion of cellulose in BA pretreated substrate from 37% to 92% at a low cellulase loading of 4 FPU/g glucan. As compared to acidic ethanol and dilute acid pretreatments, the combination of BA pretreatment and soy protein could not only stably improve the efficiency of non-cellulose components removal, but also could significantly reduce the loading of cellulase.