Impact of continuous and intermittent supply of electric assistance on high-strength 2,4-dichlorophenol (2,4-DCP) degradation in electro-microbial system

Association between DCP levels and kidney stone prevalence in US female adults based on NHANES data

Our study aimed to evaluate the correlation between levels of 2,4-DCP(2,4-Dichlorophenol) and 2,5-DCP(2,5-Dichlorophenol) and the prevalence of kidney stones in US female adults. Participants were chosen from the National Health and Nutrition Examination Survey database, spanning the years 2007-2016. Dose-response curves were analyzed using logistic regression, subgroup analyses, and other statistical methods to evaluate the relationship between 2,4-DCP and 2,5-DCP levels and the prevalence of kidney stones. The final study included 3220 participants aged over 20 years, with 252 females reporting a history of kidney stones. After accounting for all interfering variables, we found that every 0.1 ug/ml increase in 2.4-DCP correlated with a 1% rise in kidney stone prevalence (OR = 1.01, 95% CI 1.00, 1.01), whereas the same increase in 2.5-DCP was linked to a 27% growth in prevalence (OR = 1.27, 95% CI 1.01, 1.61). Sensitivity analysis was performed by triangulating 2,4-DCP and 2,5-DCP levels. The dose-response curves demonstrated a linear positive relationship between 2,4-DCP and 2,5-DCP levels and the risk of stone development. Our findings indicate a positive correlation between 2,4-DCP and 2,5-DCP levels and the prevalence of kidney stones in US female adults. This association is of clinical significance; however, a direct causal relationship cannot be definitively established.

Coupling the electrocatalytic dechlorination of 2,4-D with electroactive microbial anodes

This work proves the feasibility of dechlorinating 2,4-D, a customary commercial herbicide, using cathodic electrocatalysis driven by the anodic microbial electrooxidation of sodium acetate. A set of microbial electrochemical systems (MES) were run under two different operating modes, namely microbial fuel cell (MFC) mode, with an external resistance of 120 Ω, or microbial electrolysis cell (MEC) mode, by supplying external voltage (0.6 V) for promoting the (bio)electrochemical reactions taking place. When operating the MES as an MFC, 32% dechlorination was obtained after 72 h of treatment, which was further enhanced by working under MEC mode and achieving a 79% dechlorination. In addition, the biodegradability (expressed as the ratio BOD/COD) of the synthetic polluted wastewater was tested prior and after the MES treatment, which was improved from negative values (corresponding to toxic effluents) up to 0.135 in the MFC and 0.453 in the MEC. Our MES approach proves to be a favourable option from the point of view of energy consumption. Running the system under MFC mode allowed to co-generate energy along the dechlorination process (-0.0120 kWh mol-1 ), even though low removal rates were attained. The energy input under MEC operation was 1.03 kWh mol-1 -a competitive value compared to previous works reported in the literature for (non-biological) electrochemical reactors for 2,4-D electrodechlorination.

UV and solar-based photocatalytic degradation of organic pollutants from ceramics industrial wastewater by Fe-doped ZnS nanoparticles

UV and solar-based photocatalytic degradation of 2,4-dichlorophenol (2,4-DCP) as an organic contaminant in ceramics industry wastewater by ZnS and Fe-doped ZnS NPs was the focus of this research. Nanoparticles were prepared using a chemical precipitation process. The cubic, closed-packed structure of undoped ZnS and Fe-doped ZnS NPs was formed in spherical clusters, according to XRD and SEM investigations. According to optical studies, the optical band gaps of pure ZnS and Fe-doped ZnS nanoparticles are 3.35 and 2.51 eV, respectively, and Fe doping increased the number of carriers with high mobility, improved carrier separation and injection efficiency, and increased photocatalytic activity under UV or visible light. Doping of Fe increased the separation of photogenerated electrons and holes and facilitated charge transfer, according to electrochemical impedance spectroscopy investigations. Photocatalytic degradation studies revealed that in the present pure ZnS and Fe-doped ZnS nanoparticles, 100% treatment of 120 mL of 15 mg/L phenolic compound was obtained after 55- and 45-min UV-irradiation, respectively, and complete treatment was attained after 45 and 35-min solar light irradiation, respectively. Because of the synergistic effects of effective surface area, more effective photo-generated electron and hole separation efficiency, and enhanced electron transfer, Fe-doped ZnS demonstrated high photocatalytic degradation performance. The study of Fe-doped ZnS's practical photocatalytic treatment capability for removing 120 mL of 10 mg/L 2,4-DCP solution made from genuine ceramic industrial wastewater revealed Fe-doped ZnS's excellent photocatalytic destruction of 2,4-DCP from real industrial wastewater.

Influencing factors for nutrient removal from piggery digestate by coupling microalgae and electric field

Microalgae show great potential for nutrient removal from piggery digestate. However, full-strength piggery digestate have been found to severely inhibit microalgal growth. In this study, microalgae were coupled into the electric field (EF)system to form an electric field-microalgae system (EFMS). The effects of EF characteristics and environmental conditions on the growth of Desmodesmus sp. CHX1 and the removal of nitrogen and phosphorus in EFMS were explored. The results indicated that the optimal EF parameters for forming a fine EFMS were electrode of Zn (anode)/graphite (cathode), electric frequency of three times per day (10 min/time) and voltage of 12 V. The suitable light intensity and microalgae inoculation concentration for the EFMS were 180 μmol photons/(m²·s) and 0.2 g/L, respectively. Ammonium nitrogen and total phosphorus removal efficiencies were 65.38% and 96.16% in the piggery digestate by EFMS under optimal conditions. These results indicate that EFMS is a promising technology for nutrient removal from piggery digestate.

Modelling the cathodic reduction of 2,4-dichlorophenol in a microbial fuel cell

This work presents a simplified mathematical model able to predict the performance of a microbial fuel cell (MFC) for the cathodic dechlorination of 2,4-dichlorophenol (2,4-DCP) operating at different cathode pH values (7.0 and 5.0). Experimental data from previous work were utilized for the fitting of the model. The MFC modelled consisted of two chambers (bioanode and abiotic cathode), wherein the catholyte contained 300 mg L⁻¹ of 2,4-DCP and the anolyte 1000 mg L⁻¹ of sodium acetate. The model considered two mixed microbial populations in the anode compartment using sodium acetate as the carbon source for growth and maintenance: electrogenic and non-electrogenic biomass. 2,4-DCP, its intermediates of the reductive process (2-chlorophenol, 2-CP and 4-chlorophenol, 4-CP) and protons were considered in the model as electron acceptors in the electrogenic mechanism. The global process rate was assumed to be controlled by the biological mechanisms and modelled using multiplicative Monod-type equations. The formulation of a set of differential equations allowed to describe the simultaneous evolution of every component: concentration of sodium acetate in the anodic compartment; and concentration of 2,4-DCP, 2-CP, 4-CP, phenol and chloride in the cathode chamber. Current production and coulombic efficiencies were also estimated from the fitting. It was observed that most of the organic substrate was used by non-electrogenic mechanism. The influence of the Monod parameters was more important than the influence of the biomass yield coefficients. Finally, the model was employed to simulate different scenarios under distinct experimental conditions.

Evaluation and comparison of advanced oxidation processes for the degradation of 2,4-dichlorophenoxyacetic acid (2,4-D): a review

Organochlorine pesticides have generated public concern worldwide because of their toxicity to human health and the environment, even at low concentrations, and their persistence, being mostly nonbiodegradable. The use of 2,4-dichlorophenoxyacetic acid (2,4-D) has increased in recent decades, causing severe water contamination. Several treatments have been developed to degrade 2,4-D. This manuscript presents an overview of the physicochemical characteristics, uses, regulations, environmental and human health impacts of 2,4-D, and different advanced oxidation processes (AOPs) to degrade this organic compound, evaluating and comparing operation conditions, efficiencies, and intermediaries. Based on this review, 2,4-D degradation is highly efficient in ozonation (system O₃/plasma, 99.8% in 30 min). Photocatalytic, photo-Fenton, and electrochemical processes have the optimal efficiencies of degradation and mineralization: 97%/79.67% (blue TiO₂ nanotube arrays//UV), 100%/98% (Fe²⁺/H₂O₂/UV), and 100%/84.3% (MI-meso SnO₂), respectively. The ozonation and electrochemical processes show high degradation efficiencies, but energy costs are also high, and photocatalysis is more expensive with a separation treatment used to recover the catalyst in the solution. The Fenton process is a viable economic-environmental option, but degradation efficiencies are often low (50-70%); however, they are increased when solar UV radiation is used (90-100%). AOPs are promising technologies for the degradation of organic pollutants in real wastewater, so evaluating their strengths and weaknesses is expected to help select viable operational conditions and obtain optimal efficiencies.

Nanomaterials significance; contaminants degradation for environmental applications

Nanotechnology provides an innovative platform that is inexpensive, reasonable, having least chances of secondary contamination, economical, and an effective method to concurrently eradicate numerous impurities from contaminated wastewater. Presently, different researches have been conducted exhibiting versatile multifunctional nanoparticles (NPs) that concurrently confiscate several impurities existing in the water. Nanotechnology helps in eliminating impurities from water through the rapid, low-cost method. Pollutants such as 2,4-dichlorophenol (death-causing contaminant as it quickly gets absorbed via the skin), or industrial dyes including methyl violet (MV) or methyl orange (MO) causing water contamination were also concisely explained. In this mini-review, nanomaterials were critically investigated, and the practicability and effectiveness of the elimination of contaminations were debated. The analysis shows that a few of these processes can be commercialized in treating diverse toxins via multifunctional nanotechnology innovations. Hence, nanotechnology shows a promising and environmental friendly method to resolve the restrictions of current and conventional contaminated water treatment. We can progress the technology, without influencing and affecting the natural earth environment conditions.

Bioelectrochemically enhanced degradation of bisphenol S: mechanistic insights from stable isotope-assisted investigations

Electroactive microbes is the driving force for the bioelectrochemical degradation of organic pollutants, but the underlying microbial interactions between electrogenesis and pollutant degradation have not been clearly identified. Here, we combined stable isotope-assisted metabolomics (SIAM) and 13C-DNA stable isotope probing (DNA-SIP) to investigate bisphenol S (BPS) enhanced degradation by electroactive mixed-culture biofilms (EABs). Using SIAM, six 13C fully labeled transformation products were detected originating via hydrolysis, oxidation, alkylation, or aromatic ring-cleavage reactions from 13C-BPS, suggesting hydrolysis and oxidation as the initial and key degradation pathways for the electrochemical degradation process. The DNA-SIP results further displayed high 13C-DNA accumulation in the genera Bacteroides and Cetobacterium from the EABs and indicated their ability in the assimilation of BPS or its metabolites. Collectively, network analysis showed that the collaboration between electroactive microbes and BPS assimilators played pivotal roles the improvement in bioelectrochemically enhanced BPS degradation.

Impact of electrical stimulation modes on the degradation of refractory phenolics and the analysis of microbial communities in an anaerobic-aerobic-coupled upflow bioelectrochemical reactor

An electrically stimulated anaerobic-aerobic coupled system was developed to improve the biodegradation of refractory phenolics. Expected 4-nitrophenol, 2, 4-dinitrophenol, and COD removals in the system with aerobic cathodic and anaerobic anodic chambers were approximately 53.7%, 45.4%, 22.3% (intermittent mode) and 37.9%, 19.8%, 17.3% (continuous mode) higher than that in the control system (26.0 ± 6.4%, 30.7 ± 7.1%, 49.8 ± 3.0%). 2, 4-dichlorophenol removal in the system with aerobic anodic and anaerobic cathodic chambers was approximately 28.5% higher than that in the control system (71.4 ± 5.7%). The contribution of the aerobic cathodic/anodic chambers to the removal of phenolic compounds was higher than that of the anaerobic cathodic/anodic chambers. The species related to phenolic biodegradation (Rhodococcus, Achromobacter, PSB-M-3, and Sphingobium) were enriched in the cathodic and anodic chambers of the system. These results showed that intermittent electrical stimulation could be a potential alternative for the efficient degradation of refractory phenolics.

Correlation of extracellular polymeric substances and microbial community structure in denitrification biofilm exposed to adverse conditions

Microbial community may respond to different adverse conditions and result in the variation of extracellular polymeric substances (EPS) in denitrification biofilm; this study discovered the role of EPS in accordance with the analysis of cyclic diguanylate (c-di-GMP) and electron equilibrium (EE) under low organic loading rate, shock organic loading rate and low temperature conditions. Good nitrate removal performance could be achieved under shock organic loading rate and low temperature conditions; however, owing to the low organic loading rate, the carbon source was preferentially utilized for biomass growth. Tightly bound EPS (TB-EPS) contents progressively increased and facilitated cell adhesion and biofilm formation. The stable TB protein (TB-PN) content in TB-EPS built a cross-linked network to maintain internal biofilm structure and led to the rapid biosynthesis of polysaccharides, which could further enhance microbial adhesion and improve nitrate removal. C-di-GMP played an important role in biomass retention and biofilm formation, based on the correlation analysis of c-di-GMP and EPS. TB polysaccharide (TB-PS) contents presented a significant positive correlation with c-di-GMP content, microbial adhesion and biofilm stabilization was further enhanced through c-di-GMP regulation. In addition, a remarkable negative correlation between electron deletion rate (EDR) and TB-PN and TB-PS was discovered, and TB-PS was required to serve as energy source to enhance denitrification according to EE analysis. Surprisingly, dynamic microbial community was observed due to the drastic community succession under low temperature conditions, and the discrepancy between the dominant species for denitrification was found under shock organic loading rate and low temperature conditions. The notable increase in bacterial strains Simlicispira, Pseudomonas and Chryseobacterium was conducive to biofilm formation and denitrification under shock organic loading rate, while Dechloromonas and Zoogloea dramatically enriched for nitrate removal under low temperature conditions. The high abundance of Dechloromonas improved the secretion of EPS through the downstream signal transduction, and the c-di-GMP conserved in Pseudomonas concurrently facilitated to enhance exopolysaccharide production to shock organic loading rate and low temperature conditions.

A respiration substrate-less isolation method for acute toxicity assessment

Respiration substrate (RS)-less isolation method was developed for enhancing the sensitivity of acute toxicity assessment of heavy metal ions. RS was removed from the first step of previous isolation method, which was an effective strategy for improving acute toxicity assessment. 50% inhibiting concentration (IC₅₀) values of Cu²⁺, Cd²⁺, Zn²⁺, Hg²⁺ and Ni²⁺ were 0.39 mg L^-1, 5.99 mg L^-1, 3.99 mg L^-1, 0.23 mg L^-1 and 5.74 mg L^-1, respectively. Beyond that, the complicacy of organic toxicants assessments was investigated by choosing 3,5-dichlorophenol (DCP) as model toxicant. Biofilm sensor, morphology method and suspended microbes-based methods including one-pot method, RS-isolation method, RS-less isolation method, RS-less isolation method with added potassium ferricyanide (+F), were compared. The sensitivity to DCP can be ranked as morphology method > suspended microbes-based methods > biofilm method. The difference of the present results implicated that the methodological interference, leading in different detection mechanisms of these methods. The relative investigations can provide theoretical guidance for developing comprehensive detection methods of pollutants.

Elucidation of 2, 4-Dichlorophenol degradation by Bacillus licheniformis strain SL10

2,4-Dichlorophenol (2,4-DCP) is a priority pollutant according to US Environmental Protection Agency. Its use in various chemical industries and its presence in the effluent necessitate effective removal studies. The present study focuses on degradation of 2,4-DCP by phenol adapted bacteria Bacillus licheniformis strain SL10 (MTCC 25059) at a relatively faster rate. The organism exhibited tolerance to 150 ppm of 2,4-DCP and showed a linear relationship between the growth and substrate concentration (µ_max 0.022/h) and the inhibitory concentration was 55.74 mg/L. The degradation efficiency of the organism was 74% under optimum conditions but increased to 97% when the growth medium containing nil sodium chloride. The degradation of 2,4-DCP was effected by the action of extracellular cocktail enzyme containing Catechol 2, 3 dioxygenase (C23DO), phenol hydroxylase and Catechol, 1,2 dioxygenase (C12DO). In vitro enzymatic degradation studies exhibit 98% degradation of 50 ppm of 2,4-DCP within 2 h. Analyses of degradation products infer that the chosen organism followed a meta-cleavage pathway while degrading 2,4-DCP. In conclusion, the bacteria Bacillus licheniformis strain SL10 finds potential application in the remediation of 2,4-DCP.

Enhanced degradation of triphenyl phosphate (TPHP) in bioelectrochemical systems: Kinetics, pathway and degradation mechanisms

Triphenyl phosphate (TPHP) is one of the major organophosphate esters (OPEs) with increasing consumption. Considering its largely distribution and high toxicity in aquatic environment, it is important to explore an efficient treatment for TPHP. This study aimed to investigate the accelerated degradation of TPHP in a three-electrode single chamber bioelectrochemical system (BES). Significant increase of degradation efficiency of TPHP in the BES was observed compared with open circuit and abiotic controls. The one-order degradation rates of TPHP (1.5 mg L^-1) were increased with elevating sodium acetate concentrations and showed the highest value (0.054 ± 0.010 h^-1) in 1.0 g L^-1 of sodium acetate. This result indicated bacterial metabolism of TPHP was enhanced by the application of micro-electrical field and addition acetate as co-substrates. TPHP could be degraded into diphenyl phosphate (DPHP), hydroxyl triphenyl phosphate (OH-TPHP) and three byproducts. DPHP was the most accumulated degradation product in BES, which accounted more than 35.5% of the initial TPHP. The composition of bacterial community in BES electrode was affected by the acclimation by TPHP, with the most dominant bacteria of Azospirillum, Petrimonas, Pseudomonas and Geobacter at the genera level. Moreover, it was found that the acute toxic effect of TPHP to Vibrio fischeri was largely removed after the treatment, which revealed that BES is a promising technology to remove TPHP threaten in aquatic environment.

Piggery wastewater treatment by aerobic granular sludge: Granulation process and antibiotics and antibiotic-resistant bacteria removal and transport

The aim of this work was to study the responses of aerobic granulation process to antibiotics and investigate the antibiotics and antibiotic-resistant bacteria (ARB) removal and transport. Results showed that aerobic granular sludge (AGS) was dominant in the bioreactor at day 45, and the relatively high protein content from tightly bound extracellular polymeric substances (TB-EPS) facilitated aerobic granulation and maintained biomass stabilization. The protein contents in EPS and TB-EPS were positively correlated with relative hydrophobicity, thereby improving the adsorption capacity among hydrophobic particles. The chemical oxygen demand (COD), NH₃-N, and total N removal efficiencies were 98.0%, 97.0%, and 92.4%, respectively. Five antibiotics, including kanamycin, tetracycline, ciprofloxacin, ampicillin, and erythromycin, were examined in piggery wastewater, with concentrations up to the concentration range of 29.4-44.1 µg/l, and the total antibiotics removal rate reached up to 88.4% ± 4.5%. A total of 5.2% of the total antibiotics were discharged from bioreactor, and 62.5% of the total antibiotics were degraded, and 32.3% of total antibiotics were adsorbed by aerobic granules. The presence of antibiotics rarely exhibited an influence on AGS formation, and the relatively high microbial activity of aerobic granules was beneficial to antibiotics removal. The ARB removal rate increased up to 89.4% ± 3.3%, but a large amount of ARB was enriched in aerobic granules.

Effect of continuous and intermittent electric current on lignin wastewater treatment and microbial community structure in electro-microbial system

In this study, complex structured soluble lignin wastewater was treated by electro-microbial system (EMS) using different direct current (DC) application modes (CR (continuous ON), IR_12h (12 h-ON/12 h-OFF) and IR_2h (2 h-ON/2 h-OFF)), and physiological characteristics and microbial communities were investigated. Results showed that CR, IR_12h and IR_2h had higher lignin removals, which were almost two times that of the control reactor (R₀′, no current), and IR_2h performed best and stably. Furthermore, IR_2h exhibited the lowest ohmic resistance (Rs) of electrode biofilms, which could be explained by its higher abundance of electroactive bacteria. In the activated sludge of EMS, the concentration of dehydrogenase activity (DHA) and electronic transport system (ETS) in IR_2h were the highest (1.48 and 1.28 times of R₀′), which contributed to its high content of adenosine triphosphate (ATP). The viability of activated sludge was not affected by different DC application modes. Phospholipid fatty acids (PLFA) analysis indicated that IR_2h had the maximum content of C15:1 anteiso A, C16:0 and C18:0; CR increased the content of C15:0 anteiso and decreased the content of saturated fatty acids. Genus-level results revealed that lignin-degrading bacteria, Pseudoxanthomonas and Mycobacterium, could be enriched in IR_2h and CR, respectively.

Reactivation and pilot-scale application of long-term storage denitrification biofilm based on flow cytometry

The work provides a method on the basis of flow cytometry to evaluate the performance of denitrification biofilm during the preservation, reactivation and pilot-scale operation process. The viable cell ratio of denitrification biofilm significantly reduced and further led to the decrease of denitrification capacity after long-term preservation for 5 months. Protein component in tightly bound extracellular polymeric substances (TB-EPS) could serve to enhance microbial adhesion and promote denitrification biofilm formation. With the significant correlation of viable cell ratio and microbial characteristics, 4 °C was more appropriate for preserving denitrification biofilm and conducive to maintain the relatively high denitrification capacity. A maximum denitrification rate of 5.80 gNO₃^--N/m²·d was obtained in pilot-scale anoxic-oxic (AO) process and Dechloromonas became greater prevalence in denitrification suspended carriers. Furthermore, the enrichment of Pseudomonas, Parcubacteria, Acidovorax, Aquabacterium and Unclassified_Flavobacteriaceae enhanced biofilm formation and nutrient conservation. The significantly positive correlation between viable cell ratio and the ratio of nitrate reduction to COD consumption was discovered, and the indices of Chao, ACE, Shannon and Simpson of denitrification biofilm were positively correlated with viable cell ratio, meaning that flow cytometry analysis was reasonable and suitable to evaluate the performances of denitrification biofilm.

Degradation pathway and mechanism of Reactive Brilliant Red X-3B in electro-assisted microbial system under anaerobic condition

The degradations of Reactive Brilliant Red X-3B (RBRX-3B) in an electric-assisted microbial system (EAMS), a microbial system (MS) and an electrochemical system (ECS) were compared. The degradation efficiency of RBRX-3B in EAMS (99.8%) was 10.8% higher than the sum in MS (61.9%) and ECS (27.1%) at 24h at the optimal voltage of 0.4V, indicating that there was a synergistic effect between the electrode reaction and the biodegradation. The RBRX-3B degradation in EAMS followed first-order kinetic model. The activation energy of RBRX-3B degradation in EAMS was calculated to be 60.53kJmol^-1 by the Arrhenius equation, showing that the degradation rate of RBRX-3B mainly depended on bio-chemical reaction. RBRX-3B was degraded to both low-strength toxic compounds and nontoxic compounds in EAMS and those intermediates were easier to be further degraded. The pathway of RBRX-3B degradation in EAMS was different from that in MS.

A rich-amine porous organic polymer: an efficient and recyclable adsorbent for removal of azo dye and chlorophenol

A novel rich-amine porous organic polymer (RAPOP) was synthesized via the Schiff base reaction with melamine (MA) and terephthalaldehyde (TA) as the monomers.