A high-efficiency denitrification bioreactor for the treatment of acrylonitrile wastewater using waterborne polyurethane immobilized activated sludge

Innovative Microbial Immobilization Strategy for Di-n-Butyl Phthalate Biodegradation Using Biochar-Calcium Alginate-Waterborne Polyurethane Composites

Di-n-butyl phthalate (DBP) is a prevalent phthalate ester widely used as a plasticizer, leading to its widespread presence in various environmental matrices. This study presents an innovative microbial immobilization strategy utilizing biochar, calcium alginate (alginate-Ca, (C12H14CaO12)n), and waterborne polyurethane (WPU) composites to enhance the biodegradation efficiency of DBP. The results revealed that rice husk biochar, pyrolyzed at 300 °C, exhibits relatively safer and more stable physical and chemical properties, making it an effective immobilization matrix. Additionally, the optimal cultural conditions for Bacillus aquimaris in DBP biodegradation were identified as incubation at 30 °C and pH 7, with the supplementation of 0.15 g of yeast extract, 0.0625 g of glucose, and 1 CMC of Triton X-100. Algal biotoxicity results indicated a significant decrease in biotoxicity, as evidenced by an increase in chlorophyll a content in Chlorella vulgaris following DBP removal from the culture medium. Finally, microbial community analysis demonstrated that encapsulating B. aquimaris within alginate-Ca and WPU layers not only enhanced DBP degradation, but also prevented ecological competition from indigenous microorganisms. This novel approach showcases the potential of agricultural waste utilization and microbial immobilization techniques for the remediation of DBP-contaminated environments.

Marine toxin domoic acid alters nitrogen cycling in sediments

As a red tide algal toxin with intense neurotoxicity distributed worldwide, domoic acid (DA) has attracted increasing concerns. In this work, the integrative analysis of metagenome and metabolome are applied to investigate the impact of DA on nitrogen cycling in coastal sediments. Here we show that DA can act as a stressor to induce the variation of nitrogen (N) cycling by altering the abundance of functional genes and electron supply. Moreover, microecology theory revealed that DA can increase the role of deterministic assembly in microbial dynamic succession, resulting in the shift of niches and, ultimately, the alteration in N cycling. Notably, denitrification and Anammox, the important process for sediment N removal, are markedly limited by DA. Also, variation of N cycling implies the modification in cycles of other associated elements. Overall, DA is capable of ecosystem-level effects, which require further evaluation of its potential cascading effects.

Organic carbon source excites extracellular polymeric substances to boost Fe0-mediated autotrophic denitrification in mixotrophic system

Fe⁰-mediated autotrophic denitrification (ADN) can be suppressed by iron oxide coverage resulting from Fe⁰ corrosion. The mixotrophic denitrification (MDN) coupling Fe⁰-mediated ADN with heterotrophic denitrification (HDN) can circumvent the weakening of Fe⁰-mediated ADN over operation time. But the interaction between HDN and Fe⁰-mediated ADN for nitrogen removal of secondary effluent with deficient bioavailable organics remains unclear. When the influent COD/NO₃^--N ratio increased from 0.0 to 1.8-2.1, the TN removal efficiency was promoted significantly. The increased carbon source did not inhibit ADN, but promoted ADN and HDN synchronously. The formation of extracellular polymeric substances (EPS) was also facilitated concomitantly. Protein (PN) and humic acid (HA) in EPS increased significantly, which capable of accelerating electron transfer of denitrification. Due to that the electron transfer of HDN occurs intracellularly, the EPS with the capacity of accelerating electron transfer had a negligible influence on HDN. But for Fe⁰-mediated ADN, the increased EPS as well as corresponding PN and HA facilitated TN and NO₃^--N removal significantly, while accelerated the electron release originating from Fe⁰ corrosion. The bioorganic-Fe complexes were generated on Fe⁰ surface after used, meaning that the soluble EPS and soluble microbial products (SMP) participated in the electron transfer of Fe⁰-mediated ADN. The coexistence of HDN and ADN denitrifiers demonstrated the synchronous enhancement of HDN and ADN by the external carbon source. From the perspective of EPS and related SMP, the insight of enhancing Fe⁰-mediated ADN by external carbon source is beneficial to implement high-efficiency MDN for organics-deficient secondary wastewater.

Pyrite-Based Autotrophic Denitrifying Microorganisms Derived from Paddy Soils: Effects of Organic Co-Substrate Addition

The presence of organic co-substrate in groundwater and soils is inevitable, and much remains to be learned about the roles of organic co-substrates during pyrite-based denitrification. Herein, an organic co-substrate (acetate) was added to a pyrite-based denitrification system, and the impact of the organic co-substrate on the performance and bacterial community of pyrite-based denitrification processes was evaluated. The addition of organic co-substrate at concentrations higher than 48 mg L^-1 inhibited pyrite-based autotrophic denitrification, as no sulfate was produced in treatments with high organic co-substrate addition. In contrast, both competition and promotion effects on pyrite-based autotrophic denitrification occurred with organic co-substrate addition at concentrations of 24 and 48 mg L^-1. The subsequent validation experiments suggested that competition had a greater influence than promotion when organic co-substrate was added, even at a low concentration. Thiobacillus, a common chemolithoautotrophic sulfur-oxidizing denitrifier, dominated the system with a relative abundance of 13.04% when pyrite served as the sole electron donor. With the addition of organic co-substrate, Pseudomonas became the dominant genus, with 60.82%, 61.34%, 70.37%, 73.44%, and 35.46% abundance at organic matter concentrations of 24, 48, 120, 240, and 480 mg L^-1, respectively. These findings provide an important theoretical basis for the cultivation of pyrite-based autotrophic denitrifying microorganisms for nitrate removal in soils and groundwater.

Rice washing drainage (RWD) embedded in poly(vinyl alcohol)/sodium alginate as denitrification inoculum for high nitrate removal rate with low biodiversity

Immobilization technology with low maintenance is a promising alternative to enhance nitrate removal from water. In this study, washing rice drainage (RWD) was immobilized by poly(vinyl alcohol)/sodium alginate (PVA/SA) to obtain RWD-PVA/SA gel beads as inoculum for denitrification. When initial nitrate concentration was 50 mg N/L, nitrate was effectively removed at rates of 50-600 mg/(L∙d) using acetate as carbon source (C/N = 1.25). Arrhenius activation energy (Ea) of nitrate oxidoreductase was 28.64 kJ/mol for the RWD-PVA/SA gel beads. Temporal and spatial variation in microbial community structures were revealed along with RWD storage and in the reactors by Illumina high-throughput sequencing technology. RWD-PVA/SA gel beads has a simple (operational taxonomic units (OTUs) 〈100). Dechloromonas, Pseudomonas, Flavobacterium and Acidovorax were the most four dominant genera in the denitrification reactors inoculated with RWD-PVA/SA gel beads. This study provides an inoculum for denitrification with high nitrate removal performance and simple microbial community structures.

A review of biomass immobilization in anammox and partial nitrification/anammox systems: Advances, issues, and future perspectives

Two biomass immobilization techniques; entrapment and carrier-based, attract increasing attention in anammox and partial nitrification/anammox (PN/A) systems. This paper provides a comprehensive review of the advances, outstanding issues, and future research directions in this field. The application of both entrapment and carrier-based biofilm immobilization for reactor start up, improving the nitrogen removal performance, and protecting autotrophic bacteria from environmental fluctuations in anammox and partial nitrification/anammox systems are summarized and discussed. The key characteristics of carriers for biomass immobilization are biocompatibility for supporting microbial growth, permeability for effective mass transfer, and physical/chemical stability for long-term use. Carriers without these characteristics must be improved and re-evaluated for their feasibility in applications. Lab-scale, pilot, and full-scale studies are needed to overcome the potential obstacles of preliminary studies, and to investigate the long-term performance of biomass immobilization techniques, especially using real wastewater as influent, which may introduce more complexity and threaten the carrier's immobilization. In addition, calculating the 'nitrogen removal rate normalized by the packing ratio of carriers (NRR-C)' in the immobilization system is strongly suggested to obtain a direct comparison of immobilization performance/limitations from different studies. This review will improve understanding of the major challenges of immobilization technology in anammox and PN/A systems and provide insights into the next-stage of research and full-scale applications.

Waterborne Polyurethane Acrylates Preparation towards 3D Printing for Sewage Treatment

Conventional immobilized nitrifying bacteria technologies are limited to fixed beds with regular shapes such as spheres and cubes. To achieve a higher mass transfer capacity, a complex-structured cultivate bed with larger specific surface areas is usually expected. Direct ink writing (DIW) 3D printing technology is capable of preparing fixed beds where nitrifying bacteria are embedded in without geometry limitations. Nevertheless, conventional bacterial carrier materials for sewage treatment tend to easily collapse during printing procedures. Here, we developed a novel biocompatible waterborne polyurethane acrylate (WPUA) with favorable mechanical properties synthesized by introducing amino acids. End-capped by hydroxyethyl acrylate and mixed with sodium alginate (SA), a dual stimuli-responsive ink for DIW 3D printers was prepared. A robust and insoluble crosslinking network was formed by UV-curing and ion-exchange curing. This dual-cured network with a higher crosslinking density provides better recyclability and protection for cryogenic preservation. The corresponding results show that the nitrification efficiency for printed bioreactors reached 99.9% in 72 h, which is faster than unprinted samples and unmodified WPUA samples. This work provides an innovative immobilization method for 3D printing bacterial active structures and has high potential for future sewage treatment.

Research progress on enhancing the performance of autotrophic nitrogen removal systems using microbial immobilization technology

The autotrophic nitrogen removal process has great potential to be applied to the biological removal of nitrogen from wastewater, but its application is hindered by its unstable operation under adverse environmental conditions, such as those presented by low temperatures, high organic matter concentrations, or the presence of toxic substances. Granules and microbial entrapment technology can effectively retain and enrich microbial assemblages in reactors to improve operating efficiency and reactor stability. The carriers can also protect the reactor's internal microorganisms from interference from the external environment. This article critically reviews the existing literature on autotrophic nitrogen removal systems using immobilization technology. We focus our discussion on the natural aggregation process (granulation) and entrapment technology. The selection of carrier materials and entrapment methods are identified and described in detail and the mechanisms through which entrapment technology protects microorganisms are analyzed. This review will provide a better understanding of the mechanisms through which immobilization operates and the prospects for immobilization technology to be applied in autotrophic nitrogen removal systems.

Biochemical pathways and enhanced degradation of dioctyl phthalate (DEHP) by sodium alginate immobilization in MBR system

As one of the most representative endocrine disrupting compounds, dioctyl phthalate (DEHP) is difficult to remove due to its bio-refractory characteristic. In this study, an immobilization technology was applied in an MBR system to improve the degradation of DEHP. The degradation efficiency of DEHP was significantly improved and the number of degradation genes increased by 1/3. A bacterial strain that could effectively degrade DEHP was isolated from activated sludge and identified as Bacillus sp. The degradation pathway of DEHP was analyzed by GC-MS. DEHP was decomposed into phthalates (DBP) and Diuretic sylycol (DEP), then further to Phthalic acid (PA). PA was oxidized, dehydrogenated, and decarboxylated into protocatechins, further entered the TCA cycle through orthotopic ring opening. The DEHP degrading strain was immobilized by sodium alginate and calcium chloride under the optimized immobilization conditions, and added to MBR systems. The removal rate of DEHP (5 mg/L) (91.9%) and the number of 3, 4-dioxygenase gene copies was significantly improved by adding immobilized bacteria. Micromonospora, Rhodococcus, Bacteroides and Pseudomonas were the dominant genuses, and the results of bacterial community structure analysis show that immobilization technology is beneficial to system stability. The results showed the potential applications of the immobilized technique in DEHP wastewater treatment in MBR.

Pin-point denitrification for groundwater purification without direct chemical dosing: Demonstration of a two-chamber sulfide-driven denitrifying microbial electrochemical system

The nitrate concentration in groundwater has been increasing over time due to the intensive use of nitrogen fertilizer. Current nitrate removal technologies are restricted by the high operational cost or the inevitable secondary contaminations. This study proposed a two-chamber sulfide-driven denitrifying microbial electrochemical system to denitrify nitrate in its cathode chamber. Instead of conventional organic substrates, sulfide is oxidized in the anode chamber to generate electrons for cathodic denitrification. Long-term performance of this novel system was evaluated over 200 days (100 cycles) of batch-fed operation. With the assistance of anodic microorganisms, sulfide can be directly oxidized to sulfate thus avoiding passivating the anode. Catalyzed by the cathodic microorganisms, complete denitrification was realized with neither nitrite nor nitrous oxide accumulation. Benefiting from the electroautotrophic behavior of the functional microorganisms, high electron utilization efficiencies were achieved, 80% and 85% for the anode (sulfide oxidation) and the cathode (denitrification) respectively. Both observed electrode potentials and microbial analyses revealed that cytochrome c is the crucial electron transfer mediator in the cathodic electron transfer for denitrification. Based on the analysis of planktonic and biofilm microbial samples, anodic and cathodic extracellular electron transfer bioprocesses are proposed, both the direct and mediated electron transfers involved, as were revealed by immobilized and planktonic functional microorganisms, respectively. This study demonstrates the feasibility of purifying nitrate-contaminated groundwater without sacrificing its water quality in a separate mode of treatment. This concept can be extended to a broader field, in which the water requires bio-polishing without introducing unwanted secondary pollution like the post-denitrification of wastewater effluents.

Effect and ameliorative mechanisms of polyoxometalates on the denitrification under sulfonamide antibiotics stress

The environmental risks of the sulfonamide antibiotics have attracted much attention recently. In this study, the inhibition effects of sulfadiazine (SDZ) on denitrification electron transfer system (ETS) and ameliorative mechanisms of phosphomolybdic acid (PMo12) were first explored. When denitrification was under 2 mg/L SDZ stress, experiments indicated that PMo12 enhanced NO3--N reduction efficiency and rate from 68.30% to 100.00% and 124.22 to 184.59 N/g VSS/h, respectively. Electron transfer rate and consumption efficiency in denitrification ETS were enhanced to ameliorate SDZ inhibition, which was due to the more secreted riboflavin and cytochrome c and the increased denitrifying enzymes activity with PMo12 mediation. In addition, the microbial growth inhibition and cell membrane damage were ameliorated due to the more EPS surrounding microbe with PMo12 mediation. Higher diversity of denitrifying microbe with PMo12 mediation also promoted denitrification under SDZ stress. This work provided promising strategy to ameliorate antibiotics inhibition in the wastewater bio-treatment.

The occurrence and role of Nitrospira in nitrogen removal systems

Application of the modern microbial techniques changed the paradigm about the microorganisms performing nitrification. Numerous investigations recognized representatives of the genus Nitrospira as a key and predominant nitrite-oxidizing bacteria in biological nutrient removal systems, especially under low dissolved oxygen and substrate conditions. The recent discovery of Nitrospira capable of performing complete ammonia oxidation (comammox) raised a fundamental question about the actual role of Nitrospira in both nitrification steps. This review summarizes the current knowledge about morphological, physiological and genetic characteristics of the canonical and comammox Nitrospira. Potential implications of comammox for the functional aspects of nitrogen removal have been highlighted. The complex meta-analysis of literature data was applied to identify specific individual variables and their combined interactions on the Nitrospira abundance. In addition to dissolved oxygen and influent nitrogen concentrations, temperature and pH may play an important role in enhancing or suppressing the Nitrospira activity.

Magnetic field enhanced denitrification efficiency of immobilized bacterial particles

The effect of the magnetic field on denitrification process in immobilized bacteria particles was investigated in this study. The magnetic field could enhance the denitrification efficiency, especially for wastewater with low C/N ratios, and the average removal efficiencies of NO₃ ^--N increased by 6.58%. High-throughput sequencing analysis revealed that the magnetic field had substantial impacts on the stability of microbial community structure and relative abundance in immobilized bacteria particles, which was beneficial for the stability of denitrifying bacteria. Through the research in this paper, we suggest that magnetic field can be used to improve the denitrification performance of immobilized bacteria particles in the wastewater treatment industry.

Effect of aquaculture salinity on nitrification and microbial community in moving bed bioreactors with immobilized microbial granules

The novel immobilized microbial granules (IMG) shows a significant effect of nitrification for freshwater aquaculture. However, there is lack of evaluation study on the performance of nitrification at high salinity due to the concentration of recycled water or seawater utilization. A laboratory scale moving bed bioreactor (MBBR) with IMG was tested on recycled synthetic aquaculture wastewater for the nitrification at 2.5 mg/L NH₃-N daily. The results indicated that IMG showed a high salinity tolerance and effectively converted ammonia to nitrate up to 92% at high salinity of 35.0 g/L NaCl. As salinity increased from near zero to 35.0 g/L, the microbial activity of nitrite oxidation bacteria (NOB) in the IMG decreased by 86.32%. The microbial community analysis indicated that salinity significantly influenced the community structure. It was found that Nitrosomonas sp. and Nitrospira sp. were the dominant genera for ammonia oxidation bacteria (AOB) and NOB respectively at different salinity levels.

Effect of low-intensity direct current electric field on microbial nitrate removal in coal pyrolysis wastewater with low COD to nitrogen ratio

The coupling of bioelectrochemical system with the biological denitrification process (R1) was constructed for nitrate removal in coal pyrolysis wastewater (CPW) and the effect of low-intensity direct current electric field was investigated. Compared with control reactor (R2), the total nitrogen (TN) removal efficiency in R1 at the optimized voltage of 0.9 V was 94.20 ± 2.14%, which was 14.42% higher than that in R2. The biofilm on the cathode of R1 enhanced the nitrate reducing, however, nitrite was only reduced by bacteria in suspended activated sludge, which was confirmed by cyclic voltammetry measurement (CV). Microbial community network analysis revealed that exoelectrogenic bacteria of Pseudomonas was enriched on the anode of R1, and the "small world", including Zoogloea, Pseudomonas and Arenimonas, was established under the stimulation of voltage. Therefore, Pseudomonas transferred electron to anode, and Arenimonas could utilize electron from anode to reduce nitrate, which enhanced TN removal in R1.

Enhanced nitrogen removal of coal pyrolysis wastewater with low COD to nitrogen ratio by partial nitrification-denitrification bioprocess assisted with polycaprolactone

The purpose of this study is to investigate the enhancement of polycaprolactone (PCL) on total nitrogen (TN) removal of coal pyrolysis wastewater (CPW) with low COD to nitrogen ratio by partial nitrification-denitrification bioprocess (PNDB) in one single reactor. With the innovative combination of PCL and PNDB, the TN removal efficiency in the experimental reactor (signed as R1) was 10.21% higher than control reactor (R2). Nitrite accumulation percentage (NAP) in R1 was 82.02%, which was 17.49% higher than R2 at the dissolved oxygen (DO) concentration of 0.9-1.5 mg/L, for the reason that the extra DO was consumed by PCL biodegradation at the aerobic period. Gel permeation chromatography (GPC) results demonstrated that organics with the molecular weight of 185 Da, which could serve as additional carbon sources for denitrifiers, were generated during the PCL hydrolysis process at the anoxic period. PCL was hydrolyzed by extracellular enzymes with the break of the ester bond which was confirmed by FT-IR spectrometer. Microbial community analysis revealed that Ferruginibacter was the dominant hydrolysis bacteria in R1. Nitrosomonas were the main ammonium-oxidizing bacteria (AOB) and Hyphomicrobium were the denitrifiers in this study.

Denitrification performance and microbial diversity of immobilized bacterial consortium treating nitrate micro-polluted water

A heterotrophic denitrification process using bacterial consortium immobilized by polyurethane foams carriers to treat nitrate micro-polluted water was investigated. Nitrate reduction and nitrite accumulation were studied under several factors including initial COD/NO₃^--N concentration ratio, initial pH, initial NO₂^--N/NO₃^--N concentration ratio and inlet NO₃^--N concentration. Batch denitrification experiments showed that nitrate was completely removed at 5 h without nitrite accumulation under the optimum conditions of COD/NO₃^--N concentration ratio of 5.0-5.5 and initial pH of 7.2 ± 0.1. High initial NO₂^--N/NO₃^--N ratio enhanced denitrification rate mainly by accelerating nitrite reduction. Denitrification processes followed zero-order reaction kinetics at different initial NO₃^--N concentrations and obtained higher denitrification rate at higher inlet nitrate. High-throughput sequencing results showed that microbial community structure differed between the surface and interior space of polyurethane foams carriers while the dominant population in the inner zone of carriers was Pseudoxanthomonas.

Biological treatment of selenate-containing saline wastewater by activated sludge under oxygen-limiting conditions

Selenium often coincides with high salinity in certain industrial wastewaters, which can be a limitation in the practical application of biological treatment. However, there are no studies on the biological treatment of selenate-containing saline wastewater. A sequencing batch reactor inoculated with activated sludge was applied to treat selenate in the presence of 3% (w/v) NaCl. Start-up of the sequencing batch reactor with a 7-day cycle duration and excessive acetate as the sole carbon source succeeded in removing above 98% and 72% soluble and solid selenium, respectively, under oxygen-limiting conditions. Further selenium removal experiments with a shorter cycle duration of 3 days and a stepwise decrease of acetate addition achieved soluble and total selenium removal efficiencies in most batches above 96% and 80%, respectively. Mass balance analysis revealed that selenate was converted into elemental selenium, most of which was accumulated in the sludge. Microscopic analyses also found that elemental selenium particles were primarily present as approximately 2 μm large rods, with some extremely large particles above 10 μm. Although the bacterial populations responsible for selenium removal, especially selenate reduction, could not be identified by microbial community analysis, this study reported for the first time that selenate could be biologically treated in the presence of considerable salinity, offering implications for the practical treatment of selenium in certain industrial wastewaters.

A cascade of a denitrification bioreactor and an aerobic biofilm reactor for heavy oil refinery wastewater treatment

The performance of an efficient denitrification bioreactor–aerobic biofilm reactor cascade for heavy oil refinery wastewater treatment was investigated.

Hydrolytic denitrification and decynidation of acrylonitrile in wastewater with Arthrobacter nitroguajacolicus ZJUTB06-99

Acrylonitrile (C₃H₃N) widely used in chemical raw materials has biological toxicity with -CN bond, so it is the key to removal of cyanide from acrylonitrile wastewater. In our previous research and investigation, a strain was identified as Arthrobacter nitroguajacolicus named ZJUTB06-99 and was proved to be capable of degrading acrylonitrile. In this paper, the strain ZJUTB06-99 was domesticated with acrylonitrile-containing medium and its decyanidation and denitrification in simulated acrylonitrile wastewater were studied. The intermediate product of acrylonitrile in degradation process was identified through gas chromatography-mass spectrometer, as well as the biodegradation pathway of acrylonitrile in wastewater was deduced tentatively. The kinetics equation of biodegradation of acrylonitrile was lnC = - 0.1784t + 5.3349, with the degradation half-life of acrylonitrile in wastewater by 3.885 h. The results of this study showed that the optimum levels of temperature, pH and bacteria concentration to attain the maximum biodegradation were obtained as 30 °C, 6 and 100 g/L, respectively. The disadvantages of the biodegradation with this strain and its possible enhanced method to degrade acrylonitrile in wastewater were also discussed.

Performance and microbial community of anammox in presence of micro-molecule carbon source

Because ammonium (NH₄⁺-N) coexists with organic matter in some wastewaters, the possible adverse influences of organic matter become a major concern in the applications of anaerobic ammonium oxidation (anammox). In this study, the effects of acetate, as a representative of micro-molecule organic matter, on anammox were investigated. Efficient nitrogen removal was realized because denitrifying bacteria and anammox bacteria (AnAOB) had a better synergistic effect under the condition of chemical oxygen demand (COD) concentrations lower than 251 ± 7 mg L^-1. Furthermore, the nitrogen removal efficiency (NRE) decreased to 82.02 ± 3.14% when COD was increased to 730 ± 9 mg L^-1, and effluent free ammonia (FA) reached 21.93 ± 4.71 mg L^-1 might be one of factors leading to inhibition. However, the nitrogen-removal contribution rate of anammox remained steady at 61.97 ± 2.84% at COD of 730 ± 9 mg L^-1, which indicated that anammox was still dominant in the system. AnAOB, such as Ca. Kuenenia and Ca. Jettenia, and denitrifying bacteria, such as Denitratisoma and Thauera, were found to coexist in the reactor. Interestingly, Ca. Kuenenia presented in the trend of first decreased then increased with the increasing of organic matter concentration, which might be one of reasons that anammox played an important role in nitrogen removal at high COD concentration.

Pretreatment technologies for industrial effluents: Critical review on bioenergy production and environmental concerns

The implementation of different pretreatment techniques and technologies prior to effluent discharge is a direct result of the inefficiency of several existing wastewater treatment methods. A majority of the industrial sectors have known to cause severe negative effects on the environment. The five major polluting industries are the paper and pulp mills, coal manufacturing facilities, petrochemical, textile and the pharmaceutical sectors. Pretreatment methods have been widely used in order to lower the toxicity levels of effluents and comply with environmental standards. In this review, the possible environmental benefits and concerns of adopting different pretreatment technologies for renewable energy production and product/resource recovery has been reviewed and discussed.

Advances in Waterborne Polyurethane-Based Biomaterials for Biomedical Applications

Polyurethane (PU) is one of the most popular synthetic elastomers and widely employed in biomedical fields owing to the excellent biocompatibility and hemocompatibility known today. In addition, PU is simply prepared and its mechanical properties such as durability, elasticity, elastomer-like character, fatigue resistance, compliance or tolerance in the body during the healing, can be mediated by modifying the chemical structure. Furthermore, modification of bulk and surface by incorporating biomolecules such as anticoagulant s or biorecognizable groups, or hydrophilic/hydrophobic balance is possible through altering chemical groups for PU structure. Such modifications have been designed to improve the acceptance of implant. For these reason, conventional solventborne (solvent-based) PUs have established the standard for high performance systems, and extensively used in medical devices such as dressings, tubing, antibacterial membrane , catheters to total artificial heart and blood contacting materials, etc. However, waterborne polyurethane (WPU) has been developed to improve the process of dissolving PU materials using toxic organic solvents, in which water is used as a dispersing solvent. The prepared WPU materials have many advantages, briefly (1) zero or very low levels of organic solvents, namely environmental-friendly (2) non-toxic, due to absence of isocyanate residues, and (3) good applicability caused by extensive structure/property diversity as well as an environment-friendly fabrication method resulting in increasing applicability. Therefore, WPUs are being in the spotlight as biomaterials used for biomedical applications . The purpose of this review is to introduce an environmental- friendly synthesis of WPU and consider the manufacturing process and application of WPU and/or WPU based nanocomposites as the viewpoint of biomaterials.