Efficient harvesting of marine Chlorella vulgaris microalgae utilizing cationic starch nanoparticles by response surface methodology

Nanotechnology for the enhancement of algal cultivation and bioprocessing: Bridging gaps and unlocking potential

Algae cultivation and bioprocessing are important due to algae's potential to effectively tackle crucial environmental challenges like climate change, soil and water pollution, energy security, and food scarcity. To realize these benefits high algal biomass production and valuable compound extraction are necessary. Nanotechnology can significantly improve algal cultivation through enhanced nutrient uptake, catalysis, CO2 utilization, real-time monitoring, cost-effective harvesting, etc. Synthetic nanoparticles are extensively used due to ease of manufacturing and targeted application. Nonetheless, there is a growing interest in transitioning to environmentally friendly options like natural and 'green' nanoparticles which are produced from renewable/biological sources by using eco-friendly solvents. Presently, natural, and 'green' nanoparticles are predominantly utilized in algal harvesting, with limited application in other areas, the reasons for which remain unclear. This review aims to critically evaluate research on nanotechnology-based algae system enhancement, identify research gaps and propose solutions using natural and 'green' nanoparticles for a sustainable future.

Investigating flocculation mechanisms and ecological safety of cationic guar gum for rapid harvesting of microalgal cells

Addressing the drawbacks of traditional flocculants on microalgae biomass harvesting is crucial for large-scale industrial applications of microalgae production. In this study, cationic bioflocculant was successfully prepared by introducing cationic groups into the side chain of guar gum, achieving in-situ algae flocculation efficiency of 83.5 % with the dosage of 18.0 mg/L under pH = 10.0. Through a harmonious integration of predictive modelling and practical experimentation, a superior cell flocculation capacity of 23.5 g/g was achieved. In addition, the environmental safety and biocompatibility of cationic guar gum was assessed, using the typical suspension quantitative bacteriostatic method and the fluorescent double-staining technique. The results showed that the inhibition efficiency of Staphylococcus aureus in the system containing 60.0 mg/L cationic guar gum was only 12.0 % and there was no inhibition against Escherichia coli colonies. These findings provide a safe and green flocculant for efficient microalgae harvesting and spent medium treatment.

Eco-friendly microalgae harvesting using lipid-cored particles with a comparative life-cycle assessment

This study proposed an innovative approach using lipid-cored particles (LCPs) aimed at addressing the efficiency, cost, and environmental impact challenges in microalgae harvesting. Cetyltrimethylammonium bromide (CTAB) and chitosan (CS) were used to modify LCPs and to optimize efficiency and investigate the mechanisms of harvesting with Chlorella vulgaris. Results showed that a maximum harvesting efficiency of 97.14 % was achieved using CS-LCPs. Zeta potential and microscopic images revealed the presence of embedded CS-LCPs within microalgal flocs. Fractal dimension data suggested looser aggregates of CS-LCPs and Chlorella vulgaris, corroborated by Excitation-emission matrices (EEM) analysis further confirmation the presence of bridging networks. Moreover, life cycle assessment of five harvesting methods pointed freshwater ecotoxicity potential (FEP) and terrestrial ecotoxicity potential (TEP) as major environmental impacts, mainly from flocculant use, carrier production, and electricity consumption. Notably, LCPs showed the lowest global warming potential (GWP) at 1.54 kg CO2 eq, offering a viable, low-carbon, cost-effective harvesting alternative.

Technologies for harvesting the microalgae for industrial applications: Current trends and perspectives

Microalgae are emerging as a promising source for augmenting the supply of essential products to meet global demands in an environmentally sustainable manner. Despite the potential benefits of microalgae in industry, the high energy consumption for harvesting remains a significant obstacle. This review offers a comprehensive overview of microalgae harvesting technologies and their industrial applications, with particular emphasis on the latest advances in flocculation techniques. These cutting-edge methods have been applied to biodiesel production, food and nutraceutical processing, and wastewater treatment. Large-scale harvesting is still severely impeded by the high cost despite progress has been made in laboratory studies. In the future, cost-effective microalgal harvesting will rely on efficient resource utilization, including the use of waste materials and the reuse of media and flocculants. Additionally, precise regulation of biological metabolism will be necessary to overcome algal species-related limitations through the development of extracellular polymeric substance-induced flocculation technology.

Nano magnetite assisted flocculation for efficient harvesting of lutein and lipid producing microalgae biomass

For commercial scale algal biorefining, harvesting cost is a major bottleneck. Thus, a cost-effective, less-energy intensive, and efficient harvesting method is being investigated. Among several harvesting methods, magnetic flocculation offers the benefits of modest operation, energy savings and quick separation. This study aims to develop novel magnetite-(Fe₃O₄) nanoparticles (MNPs) of 20 nm average size and their high reusability potential to reduce the harvesting cost of microalgae biomass. The MNPs were synthesized and characterized using FTIR, Zeta analyzer, and SEM before performing on Chlorella sorokiniana Kh12 and Tu5. For maximum harvesting efficiency >99%, the optimal culture pH, MNPs concentration, and agitation speed were 3, 200 mg/L, and 450 rpm, respectively. Subsequently, MNPs were recovered via alkaline treatment and reused up to 5 cycles as they retained their reactivity and harvesting efficiency. The studied MNPs-based harvesting method could be adopted at a commercial scale for cost-effective algae biorefinery in the future.

Preparation, physicochemical and pharmacological study of 10-hydroxycamptothecin solid dispersion with complexation agent - xylan-nonanoic acid amphiphilic conjugates

An amphiphilic conjugate of carboxymethyl xylan-nonanoic acid (CX-NA) was synthesized with molecular weight of 38.35 kDa, HLB value of 13.59, and critical micelle concentration of 23.17 μg/ml. CX-NA could efficiently encapsulate the model drug of 10-hydroxycamptothecin (HCPT). The drug loaded amphiphilic conjugate could self-assembled to micelles with an average diameter of 110 nm, zeta potential of -42.88 mV, and drug encapsulation efficiency of 79.8%. In vitro experiments confirmed that the drug-loaded micelles exhibited excellent stability and permeability in the intestinal environment. Transport pathway demonstrated that HCPT was uptake by cells through clathrin-mediated endocytosis. Intestinal in situ absorption study further confirmed CX-NA vehicle could enhance HPCT to transport across intestinal epithelial cells in colonic tissues. Furthermore, the formulation showed excellent anti-tumor activity in vitro and improved bioavailability of 3.4 times in vivo as comparing with free HCPT. These findings imply that this amphiphilic conjugate is a potential and promising vehicle for delivery anticancer drug.

Recent progress in flocculation, dewatering, and drying technologies for microalgae utilization: Scalable and low-cost harvesting process development

Microalgal research has made significant progress in terms of the high-value-added industrial application of microalgal biomass and its derivatives. However, cost-effective techniques for producing, harvesting, and processing microalgal biomass on a large scale still need to be fully explored in order to optimize their performance and achieve commercial robustness. In particular, technologies for harvesting microalgae are critical in the practical process as they require excessive energy and equipment costs. This review focuses on microalgal flocculation, dewatering, and drying techniques and specifically covers the traditional approaches and recent technological progress in harvesting microalgal biomass. Several aspects, including the characteristics of the target microalgae and the type of final value-added products, must be considered when selecting the appropriate harvesting technique. Furthermore, considerable aspects and possible future directions in flocculation, dewatering, and drying steps are proposed to develop scalable and low-cost microalgal harvesting systems.

Optimization of Microalga Chlorella vulgaris Magnetic Harvesting

Harvesting of microalgae is a crucial step in microalgae-based mass production of different high value-added products. In the present work, magnetic harvesting of Chlorella vulgaris was investigated using microwave-synthesized naked magnetite (Fe₃O₄) particles with an average crystallite diameter of 20 nm. Optimization of the most important parameters of the magnetic harvesting process, namely pH, mass ratio (m_r) of magnetite particles to biomass (g/g), and agitation speed (rpm) of the C. vulgaris biomass-Fe₃O₄ particles mixture, was performed using the response surface methodology (RSM) statistical tool. Harvesting efficiencies higher than 99% were obtained for pH 3.0 and mixing speed greater or equal to 350 rpm. Recovery of magnetic particles via detachment was shown to be feasible and the recovery particles could be reused at least five times with high harvesting efficiency. Consequently, the described harvesting approach of C. vulgaris cells leads to an efficient, simple, and quick process, that does not impair the quality of the harvested biomass.

Marine Biotechnology: Challenges and Development Market Trends for the Enhancement of Biotic Resources in Industrial Pharmaceutical and Food Applications. A Statistical Analysis of Scientific Literature and Business Models

Biotechnology is an essential tool for the sustainable exploitation of marine resources, although the full development of their potential is complicated by a series of cognitive and technological limitations. Thanks to an innovative systematic approach that combines the meta-analysis of 620 articles produced worldwide with 29 high TRL (Technology Readiness Level) European funded projects, the study provides an assessment of the growth prospects of blue biotechnologies, with a focus on pharmaceutical and food applications, and the most promising technologies to overcome the main challenges in the commercialization of marine products. The results show a positive development trend, with publications more than doubled from 2010 (36) to 2019 (70). Biochemical and molecular characterization, with 150 studies, is the most widely used technology. However, the emerging technologies in basic research are omics technologies, pharmacological analysis and bioinformatics, which have doubled the number of publications in the last five years. On the other hand, technologies for optimizing the conditions of cultivation, harvesting and extraction are central to most business models with immediate commercial exploitation (65% of high-TRL selected projects), especially in food and nutraceutical applications. This research offers a starting point for future research to overcome all those obstacles that restrict the marketing of products derived from organisms.

Microalgal ecotoxicity of nanoparticles: An updated review

Nowadays, nanotechnology and its related industries are becoming a rapidly explosive industry that offers many benefits to human life. However, along with the increased production and use of nanoparticles (NPs), their presence in the environment creates a high risk of increasing toxic effects on aquatic organisms. Therefore, a large number of studies focusing on the toxicity of these NPs to the aquatic organisms are carried out which used algal species as a common biological model. In this review, the influences of the physio-chemical properties of NPs and the response mechanisms of the algae on the toxicity of the NPs were discussed focusing on the "assay" studies. Besides, the specific algal toxicities of each type of NPs along with the NP-induced changes in algal cells of these NPs are also assessed. Almost all commonly-used NPs exhibit algal toxicity. Although the algae have similarities in the symptoms under NP exposure, the sensitivity and variability of each algae species to the inherent properties of each NPs are quite different. They depend strongly on the concentration, size, characteristics of NPs, and biochemical nature of algae. Through the assessment, the review identifies several gaps that need to be further studied to make an explicit understanding. The findings in the majority of studies are mostly in laboratory conditions and there are still uncertainties and contradictory/inconsistent results about the behavioral effects of NPs under field conditions. Besides, there remains unsureness about NP-uptake pathways of microalgae. Finally, the toxicity mechanisms of NPs need to be thoughtfully understood which is essential in risk assessment.

Extracellular organic matter (EOM) distribution characteristic in algae electro-dewatering process

The work evaluated the influence of different operating conditions (voltage, ionic strength and mechanical pressure) on algae electro-osmotic dewatering effect and extracellular organic matter (EOM) regionalization. It was found that the algae electro-dewatering effect became better as the voltage and ionic strength increased, but electro-dewatering effect was decreased when ionic strength was more than 0.006gNaCl/gTSS, this indicated that too high ionic strength will reduce algae electro-dewatering effect. In addition, electro-osmosis effect first increases and then weakens when the pressure was increased. The content of dissolved organic materials (DOM) in the filtrate of both electrodes was increased when the voltage and ionic strength enhanced, the DOM content of filtrate at cathode and anode were increased from 42.9 mg/L, 36.7 mg/L to 68.2 mg/L, 85.3 mg/L when ionic strength raised from 0gNaCl/gTSS to 0.01gNaCl/gTSS, this indicated that a large amount of EOM dissolution as the voltage and ionic strength increased. The DOM content of both electrodes did not change significantly when mechanical pressure changed, anodic oxidation can oxidize and decompose macromolecular weight substances into mid-molecular weight and low molecular weight substances.

Forward osmosis with an algal draw solution to concentrate municipal wastewater and recover resources

This study aimed to concentrate and recover resources from municipal wastewater with a novel forward osmosis (FO) system. The FO system used synthetic seawater as the draw solution (DS) to extract water from the feed solution (FS) (synthetic raw municipal wastewater). Because ammonium passed through the FO membrane from the FS to the DS, we cultivated an algal strain (Chlorella vulgaris) in the DS to remove and recover ammonium. For three consecutive FO cycles, the algal FO system removed 35.4% of the ammonium from the DS, increased the concentrations of COD and PO 4 3 - - P in the FS by 43.0%, and achieved a water flux of 11.59 ± 0.49 L m^-2  hr^-1 . Throughout the FO cycles, the algal biomass concentration of the DS stayed at 606 ± 29 mg COD/L due to simultaneous algal growth and DS dilution. This FO process may be feasible to implement for full-scale applications to concentrate wastewater and recover resources. PRACTITIONER POINTS: A novel forward osmosis (FO) system with an algal draw solution (DS) concentrated municipal wastewater and recovered resources (ammonium). Ammonium but not organic matter or phosphate diffused across the FO membrane from the feed solution (FS) to the DS. The algal FO system increased COD/phosphate concentration in the FS by 43.0% and removed 35.4% of ammonium from the DS. The water fluxes in the algal FO system and the control were 11.59 and 12.02 L m^-2  hr^-1 , respectively. The novel algal FO process has the potential to improve full-scale efficiency by concentrating municipal wastewater and recovering nutrients.

Flocculation Harvesting Techniques for Microalgae: A Review

Microalgae have been considered as one of the most promising biomass feedstocks for various industrial applications such as biofuels, animal/aquaculture feeds, food supplements, nutraceuticals, and pharmaceuticals. Several biotechnological challenges associated with algae cultivation, including the small size and negative surface charge of algal cells as well as the dilution of its cultures, need to be circumvented, which increases the cost and labor. Therefore, efficient biomass recovery or harvesting of diverse algal species represents a critical bottleneck for large-scale algal biorefinery process. Among different algae harvesting techniques (e.g., centrifugation, gravity sedimentation, screening, filtration, and air flotation), the flocculation-based processes have acquired much attention due to their promising efficiency and scalability. This review covers the basics and recent research trends of various flocculation techniques, such as auto-flocculation, bio-flocculation, chemical flocculation, particle-based flocculation, and electrochemical flocculation, and also discusses their advantages and disadvantages. The challenges and prospects for the development of eco-friendly and economical algae harvesting processes have also been outlined here.

Variations of floc morphology and extracellular organic matters (EOM) in relation to floc filterability under algae flocculation harvesting using polymeric titanium coagulants (PTCs)

The work evaluated the algae cells removal efficiency using titanium salt coagulants with different degree of polymerization (PTCs), and the algae cells aggregates and extracellular organic matter (EOM) under chemical flocculation were investigated. The results indicated that PTCs performed well in algae cells flocculation and separation. The main mechanism using PTCs of low alkalisation degree for algae flocculation was associated with charge neutralization, while adsorption bridging and sweep flocculation was mainly responsible for algae removal by PTCs of high alkalisation degree treatment. In addition, the flocs formed by PTC_1.0 showed the best filtration property, and EOM reached the minimum at this time, indicating the flocs formed by PTC_1.0 were more compact than other PTCs, which can be confirmed by SEM analysis. Three-dimensional excitation emission matrix fluorescence (3D-EEM) and high performance size exclusion chromatography (HPSEC) revealed that the EOMs were removed under PTCs flocculation, which improved floc filterability.