Potential of acid-tolerant microalgae, Desmodesmus sp. MAS1 and Heterochlorella sp. MAS3, in heavy metal removal and biodiesel production at acidic pH

The cadmium tolerance and bioaccumulation mechanism of Tetratostichococcus sp. P1: insight from transcriptomics analysis

Cadmium (Cd) has become a severe issue in relatively low concentration and attracts expert attention due to its toxicity, accumulation, and biomagnification in living organisms. Cd does not have a biological role and causes serious health issues. Therefore, Cd pollutants should be reduced and removed from the environment. Microalgae have great potential for Cd absorption for waste treatment since they are more environmentally friendly than existing treatment methods and have strong metal sorption selectivity. This study evaluated the tolerance and ability of the microalga Tetratostichococcus sp. P1 to remove Cd ions under acidic conditions and reveal mechanisms based on transcriptomics analysis. The results showed that Tetratostichococcus sp. P1 had a high Cd tolerance that survived under the presence of Cd up to 100 µM, and IC50, the half-maximal inhibitory concentration value, was 57.0 μM, calculated from the change in growth rate based on the chlorophyll content. Long-term Cd exposure affected the algal morphology and photosynthetic pigments of the alga. Tetratostichococcus sp. P1 removed Cd with a maximum uptake of 1.55 mg g-1 dry weight. Transcriptomic analysis revealed the upregulation of the expression of genes related to metal binding, such as metallothionein. Group A, Group B transporters and glutathione, were also found upregulated. While the downregulation of the genes were related to photosynthesis, mitochondria electron transport, ABC-2 transporter, polysaccharide metabolic process, and cell division. This research is the first study on heavy metal bioremediation using Tetratostichococcus sp. P1 and provides a new potential microalga strain for heavy metal removal in wastewater.[Figure: see text]Abbreviations:BP: Biological process; bZIP: Basic Leucine Zipper; CC: Cellular component; ccc1: Ca (II)-sensitive cross complementary 1; Cd: Cadmium; CDF: Cation diffusion facilitator; Chl: Chlorophyll; CTR: Cu TRansporter families; DAGs: Directed acyclic graphs; DEGs: Differentially expressed genes; DVR: Divinyl chlorophyllide, an 8-vinyl-reductase; FPN: FerroportinN; FTIR: Fourier transform infrared; FTR: Fe TRansporter; GO: Gene Ontology; IC50: Growth half maximal inhibitory concentration; ICP: Inductively coupled plasma; MF: molecular function; NRAMPs: Natural resistance-associated aacrophage proteins; OD: Optical density; RPKM: Reads Per Kilobase of Exon Per Million Reads Mapped; VIT1: Vacuolar iron transporter 1 families; ZIPs: Zrt-, Irt-like proteins.

Distribution characteristics of microorganisms in sediments of Dagu River and their biological indicator function for evaluating eco-environmental quality of rural river

The microorganisms in sediments play a crucial role in biogeochemical cycle processes, and numerous studies have shown that microbial community is closely related to environmental factors. However, the usability of sediment microorganisms to evaluate the eco-environment quality of rural rivers has not been adequately explored. This study investigated the distribution characteristics and response of sediment microorganisms to environmental parameters and benthic organisms. Based on the environmental parameters and benthic community indices, the 12 stations were divided into high-polluted group A, moderate-polluted group B and low-polluted group C. Station DG01 and DG02 in group A had the highest level of As and Ni pollution and nutrient concentration, and DG09 in group A had the lowest benthic diversity. Correspondingly, group A had the lowest abundance of Proteobacteria, which has a higher requirement for the environment than Planctomycetes. Group B had the highest sulfide level (97.45 mg/kg), and bacteria (Thiobacillus, Sulfurisoma and Sulfuritalea) with genes involved in sulfur cycling were more enriched in this group. Group C had the lowest level of total nitrogen (243.36 mg/kg), and Rhodanobacteraceae in Xanthomonadales might be a key bioindicator for low nitrogen. In addition, Chlorophyta was found to be more susceptible to heavy metals, and moreover co-occurrence networks showed that microeukaryotes were more sensitive to heavy metal pollution compared to benthic animals and prokaryotes. Therefore, this study suggested that benthic microorganisms especially microeukaryotes could be used as good indicators for evaluating the eco-environmental quality of rural rivers.

Plummeting toxic contaminates from water through phycoremediation: Mechanism, influencing factors and future outlook to enhance the capacity of living and non-living algae

Freshwater habitats hold a unique role in the survival of all living organisms and supply water for drinking, irrigation, and life support activities. In recent decades, due to anthropogenic activities, deterioration in the water quality has been a long-lasting problem and challenge to the scientific fraternity. Although, these freshwater bodies have a bearable intrinsic capacity for pollution load however alarming increase in pollution limits the intrinsic capacities and requires additional technological interventions. The release of secondary pollutants from conventional interventions further needs revisiting the existing methodologies and asking for green interventions. Green interventions such as phycoremediation are natural, eco-friendly, economic, and energy-efficient alternatives and provide additional benefits such as nutrient recovery, biofuel production, and valuable secondary metabolites from polluted freshwater bodies. This systemic review in a nut-shell comprises the recent research insights on phycoremediation, technological implications, and influencing factors, and further discusses the associated mechanisms of metal ions biosorption by living and non-living algae, its advantages, and limitations. Besides, the article explores the possibility of future research prospects for applicability at a field scale that will help in the efficient utilization of resources, and improved ecological and health risks.

Supplementation of micro-nutrients to growth media of microalgae-induced biomass and fatty acids composition for clean energy generation

The presence of harmful heavy metals (HMs) in the aquatic environment can damage the environment and threaten human health. Traditional remediation techniques can have secondary impacts. Thus, more sustainable approaches must be developed. Microalgae have biological properties (such as high photosynthetic efficiency and growth), which are of great advantage in the HMs removal. In this study, the effect of various concentrations (2×, 4×, and 6×) of copper (Cu), cobalt (Co), and zinc (Zn) on microalgae (C. sorokiniana GEEL-01, P. kessleri GEEL-02, D. asymmetricus GEEL-05) was investigated. The microalgal growth kinetics, HMs removal, total nitrogen (TN), total phosphor (TP), and fatty acids (FAs) compositions were analyzed. The highest growth of 1.474 OD680nm and 1.348 OD680nm was obtained at 2× and 4×, respectively, for P. kessleri GEEL-02. P. kessleri GEEL-02 showed high removal efficiency of Cu, Co, and Zn (38.92-55.44%), (36.27-68.38%), and (32.94-51.71%), respectively. Fatty acids (FAs) analysis showed that saturated FAs in C. sorokiniana GEEL-01 and P. kessleri GEEL-02 increased at 2× and 4× concentrations while decreasing at 6×. For P. kessleri GEEL-02, the properties of biodiesel including the degree of unsaturation (UD) and cetane value (CN) increased at 2×, 4×, and 6× as compared to the control. Thus, this study demonstrated that the three microalgae (particularly P. kessleri GEEL-02) are more suitable for nutrient and HMs removal coupled with biomass/biodiesel production.

Phycoremediation of heavy metals and production of biofuel from generated algal biomass: a review

Due to human activity and natural processes, heavy metal contamination frequently affects the earth's water resources. The pollution can be categorized as resistant and persistent since it poses a significant risk to terrestrial and marine biological systems and human health. Because of this, several appeals and demands have been made worldwide to try and clean up these contaminants. Through bioremediation, algal cells are frequently employed to adsorb and eliminate heavy metals from the environment. Bioremediation is seen as a desirable strategy with few adverse effects and low cost. Activities and procedures for bioremediation involving algal cells depend on various environmental factors, including salinity, pH, temperature, the concentration of heavy metals, the amount of alga biomass, and food availability. Additionally, the effectiveness of removing heavy metals from the environment by assessing how environmental circumstances affect algal activities. The main issues discussed are (1) heavy metal pollution of water bodies, the role of algal cells in heavy metal removal, the methods by which algae cells take up and store heavy metals, and the process of turning the algae biomass produced into biofuel. (2) To overcome the environmental factors and improve heavy metals bioremediation, many strategies are applied, such as immobilizing the cells, consortium culture, and using dry mass rather than living cells. (3) The processes for converting produced algal biomass into biofuels like biodiesel and biomethanol. The present study discusses the life cycle assessment and the limitations of biofuel products from algae biomass.

Utilizing CO2 in industrial off-gas for microalgae cultivation: considerations and solutions

The utilization of microalgae to treat carbon dioxide (CO₂)-rich industrial off-gas has been suggested as both beneficial for emissions reduction and economically favorable for the production of microalgal products. Common sources of off-gases include coal combustion (2-15% CO₂), cement production (8-15% CO₂), coke production (18-23% CO₂), and ore smelting (6-7% CO₂). However, industrial off-gas also commonly contains other acid gas components [typically nitrogen oxides (NO_X) and sulfur dioxide (SO₂)] and metals that could inhibit microalgae growth and productivity. To utilize industrial off-gas effectively in microalgae cultivation systems, a number of solutions have been proposed to overcome potential inhibitions. These include bioprospecting to identify suitable strains, genetic modification to improve specific cellular characteristics, chemical additions, and bioreactor designs and operating procedures.In this review, results from microalgae experiments related to utilizing off-gas are presented, and the outcomes of different conditions discussed along with potential solutions to resolve limitations associated with the application of off-gas.

A critical insight into occurrence and fate of polycyclic aromatic hydrocarbons and their green remediation approaches

Over the last century, the tremendous growth in industrial activities particularly in the sectors of pharmaceuticals, petrochemicals and the reckless application of fertilizers and insecticides has raised the contamination of polyaromatic hydrocarbons (PAHs) tremendously. For more than a decade, the main focus of environmental experts is to come up with management approaches for the clean-up of sites polluted with PAHs. These are ubiquitous in nature i.e., widely distributed in ecosystem ranging from soil, air and marine water. Most of the PAHs possess immunotoxicity, carcinogenicity and genotoxicity. Being highly soluble in lipids, they are readily absorbed into the mammalian gastro intestinal tract. They are widely distributed with marked tendency of getting localized into body fat in varied tissues. Several remediation technologies have been tested for the removal of these environmental contaminants, particularly bioremediation has turned out to be a hope as the safest and cost-effective option. Therefore, this review first discusses various sources of PAHs, their effect on human health and interactions of PAHs with soils and sediments. In this review, a holistic insight of current scenario of existing remediation technologies and how they can be improvised along with the hindrances in the path of these technologies are properly addressed.

Bioremediation of zinc and manganese in swine wastewater by living microalgae: Performance, mechanism, and algal biomass utilization

The remediation effects of living Chlorella sp. HL on zinc and manganese in swine wastewater was investigated, and the responses of algal cells and the mechanism were explored. In the wastewater with Zn(II) concentration of 1.85 mg/L and Mn(II) of 1 or 6 mg/L, the highest removal of Zn(II) by Chlorella reached 86.72% and 97.16%, respectively, and the Mn(II) removal were 42.74% and 30.33%, respectively. The antioxidant system of cells was activated by a significant increase in superoxide dismutase and catalase enzyme activities and a significant decrease in malondialdehyde in the mixed system compared to the single system. The presence of Mn(II) could positively regulate the differentially expressed genes related to catalytic activity and metabolic processes between the single Zn system and the mixed systems, reducing the stress of Zn(II) on Chlorella and more favorable to chlorophyll synthesis. The heavy metal-containing microalgal biomass obtained has the potential as feed additives.

Phycoremediation of industrial wastewater using Vaucheria debaryana and Cladophora glomerata

Rapid urbanization and industrialization are regarded as the leading causes of environmental pollution, mainly aquatic pollution. This study was carried out to investigate the use of algal species Cladophora glomerata (CG) and Vaucheria debaryana (VD) as a cost-effective and environmentally friendly phycoremediators for composite industrial effluent. After the pot experimentation using algal species, a considerable decrease in electrical conductivity (EC: 49.10-81.46%), dissolved oxygen (DO: 3.76-8.60%), biological oxygen demand (BOD: 7.81-39.28%), chemical oxygen demand (COD: 7.81-39.28%), total suspended solids (TSS: 38.09-62.21%), and total dissolved solids (TDS: 38.09-62.21%) was observed. Before and after experimentation, the heavy metals were also quantified using atomic absorption spectrophotometry (AAS), and considerable reduction was observed in Cd (41.02-48.75%) and Pb (48.72-57.03%) concentrations. The Cd concentration determined in CTCG (control treatment for Cladophora glomerata containing tap water), CG (treatment pot for Cladophora glomerata containing industrial effluents), CTVD (control pot for Vaucheria debaryana containing tap water), and VD (treatment pot for Vaucheria debaryana containing industrial effluents) biomass was 0.06, 0.499, 0.035, and 0.476 mg/kg, respectively. The Pb uptake determined in CTCG, CG, CTVD, and VD was 0.32, 1.12, 0.31, and 0.49 mg/kg, respectively, using wet digestion method and ASS. The data revealed that C. glomerata has the highest bioconcentration factor for Cd (98.42%), followed by Pb (92.57%) in treatment pots containing industrial effluents (CG and VD). Furthermore, C. glomerata showed the highest bioconcentration factor for Pb (86.49%) as compared to Cd (75%) in tap water (CTCG and CTVD). The t test analysis revealed that heavy metal concentrations significantly (p ≤ 0.05) reduced through the phycoremediation process. The analysis found that C. glomerata removed 48.75% of Cd and 57.027% of Pb from industrial effluents. Phytotoxicity assay was also performed by cultivating Triticum sp. in order to analyze the toxicity of the untreated (control) and treated water samples. Phytotoxicity result shows that the effluent treated with both Cladophora glomerata and Vaucheria debaryana gives better wheat (Triticum sp.) plant % germination, plant height (cm), and root height (cm). The highest plant % germination was showed by treated CTCG (90%), followed by CTVD (80%) and CG (70%) and VD (70%). The study concluded that phycoremediation using C. glomerata and V. debaryana is one of the environment-friendly approaches. The proposed algal-based strategy is economically viable and environmentally sustainable that can be utilized for the remediation of industrial effluents.

Integrated culture and harvest systems for improved microalgal biomass production and wastewater treatment

Microalgae cultivation in wastewater has received much attention as an environmentally sustainable approach. However, commercial application of this technique is challenging due to the low biomass output and high harvesting costs. Recently, integrated culture and harvest systems including microalgae biofilm, membrane photobioreactor, microalgae-fungi co-culture, microalgae-activated sludge co-culture, and microalgae auto-flocculation have been explored for efficiently coupling microalgal biomass production with wastewater purification. In such systems, the cultivation of microalgae and the separation of algal cells from wastewater are performed in the same reactor, enabling microalgae grown in the cultivation system to reach higher concentration, thus greatly improving the efficiency of biomass production and wastewater purification. Additionally, the design of such innovative systems also allows for microalgae cells to be harvested more efficiently. This review summarizes the mechanisms, characteristics, applications, and development trends of the various integrated systems and discusses their potential for broad applications, which worth further research.

Cyanidiales-Based Bioremediation of Heavy Metals

With growing urbanization and ongoing development activities, the consumption of heavy metals has been increasing globally. Although heavy metals are vital for the survival of living beings, they can become hazardous when they surpass the permissible limit. The effect of heavy metals varies from normal to acute depending on the individual, so it is necessary to treat the heavy metals before releasing them into the environment. Various conventional treatment technologies have been used based on physical, chemical, and biological methods. However, due to technical and economic constraints and poor sustainability towards the environment, the use of these technologies has been limited. Microalgal-based heavy metal removal has been explored for the past few decades and has been seen as an effective, environment-friendly, and inexpensive method compared to conventional treatment technology. Cyanidiales that belong to red algae have the potential for remediation of heavy metals as they can withstand and tolerate extreme stresses of heat, acid salts, and heavy metals. Cyanidiales are the only photosynthetic organisms that can survive and thrive in acidic mine drainage, where heavy metal contamination is often prevalent. This review focuses on the algal species belonging to three genera of Cyanidiales: Cyanidioschyzon, Cyanidium, and Galdieria. Papers published after 2015 were considered in order to examine these species' efficiency in heavy metal removal. The result is summarized as maximum removal efficiency at the optimum experimental conditions and based on the parameters affecting the metal ion removal efficiency. This study finds that pH, initial metal concentration, initial algal biomass concentration, algal strains, and growth temperature are the major parameters that affect the heavy metal removal efficiency of Cyanidiales.

Response and tolerance ability of Chlorella vulgaris to cadmium pollution stress

Cadmium, which is widely used in electroplating industry, chemical industry, electronic industry and nuclear industry, is harmful to human health and ecological environment. The effects of Cd at different initial concentrations on biomass, antioxidant enzyme activity and ultrastructure of Chlorella vulgaris were analysed in the present study. The results showed that C. vulgaris maintained a slow-growth trend at 3.0 mg/L Cd, and the peroxidase (POD) enzyme activity reached the highest at this concentration, which indicated that C. vulgaris could resist the oxidative damage of cells by increasing the enzyme activity, so as to improve the tolerance of C. vulgaris to Cd. When the concentration of Cd was 5.0 mg/L, although the activity of the superoxide dismutase enzyme was still very high, POD enzyme could not remove the hydrogen peroxide produced in cells in time, leading to cell damage and even death. Therefore, when the concentration reached 5.0 mg/L, the growth of C. vulgaris began to decline after four days of stress, and the cell structure was significantly damaged after six days of stress. And the higher concentration of Cd caused more Cd accumulation in cells and a serious damage to C. vulgaris. C. vulgaris can be used as an early warning indicator of Cd pollution, and it can be used for bioremediation of Cd contaminated water through tolerant subculture.

Sustainable treatment of dye wastewater by recycling microalgal and diatom biogenic materials: Biorefinery perspectives

Discharge of untreated or partially treated toxic dyes containing wastewater from textile industries into water streams is hazardous for environment. The use of heavy metal(s) rich dyes, which are chemically active in azo and sulfur content(s) has been tremendously increasing in last two decades. Conventional physical and chemical treatment processes help to eliminate the dyes from textile wastewater but generates the secondary pollutants which create an additional environmental problem. Microalgae especially the diatoms are promising candidate for dye remediation from textile wastewater. Nanoporous diatoms frustules doped with nanocomposites increase the wastewater remediation efficiency due to their adsorption properties. On the other hand, microalgae with photosynthetic microbial fuel cell have shown significant results in being efficient, cost effective and suitable for large scale phycoremediation. This integrated system has also capability to enhance lipid and carotenoids biosynthesis in microalgae while simultaneously generating the bioelectricity. The present review highlights the textile industry wastewater treatment by live and dead diatoms as well as microalgae such as Chlorella, Scenedesmus, Desmodesmus sp. etc. This review engrosses applicability of diatoms and microalgae as an alternative way of conventional dye removal techniques with techno-economic aspects.

Algae in wastewater treatment, mechanism, and application of biomass for production of value-added product

The pollutants can enter water bodies at various point and non-point sources, and wastewater discharge remains a major pathway. Wastewater treatment effectively reduces contaminants, it is expensive and requires an eco-friendly and sustainable alternative approach to reduce treatment costs. Algae have recently emerged as a potentially cost-effective method to remediate toxic pollutants through the mechanism of biosorption, bioaccumulation, and intracellular degradation. Hence, before discharging the wastewater into the natural environment better solutions for environmental resource recovery and sustainable developments can be applied. More importantly, algae are a potential feedstock material for various industrial applications such as biofuel production. Currently, researchers are developing algae as a source for pharmaceuticals, biofuels, food additives, and bio-fertilizers. This review mainly focused on the potential of algae and their specific mechanisms involved in wastewater treatment and energy recovery systems leading to important industrial precursors. The review is highly beneficial for scientists, wastewater treatment plant operators, freshwater managers, and industrial communities to support the sustainable development of natural resources.

Cyto-genotoxicity evaluation of pyroligneous acid using Allium cepa assay

Pyroligneous acid (PA) is a highly oxygenated organic condensate obtained by cooling the gases generated from the pyrolysis process. PA has been used in agriculture for several years with multiple beneficial effects, including plant health and yields, pest resilience, and seed germination. It is generally applied to agricultural soils in the dilution of 1:1000 to 1:100, corresponding to 0.1-1% PA concentration. In this study, the cyto-genotoxic potential of PA to Allium cepa meristematic root-tips (where all cells undergo repeated division and form primary root tissues) was examined. Exposure to PA concentrations of 0.1% and above showed a reduction in the mitotic index percentage, and at 5%, a complete arrest in the cell division was recorded. However, chromosomal aberrations at 0.5, 1, and 3% PA were reversible types such as bridges, vagrants, laggards, and multipolar anaphase, with a maximum of only 5.8% chromosomal aberration observed at 3% PA. Comet assay (single-cell gel electrophoresis) for genotoxicity assessment determined using PA exposed A. cepa root tips showed that it was not genotoxic. The absence of cyto-genotoxicity in A. cepa, even at concentrations far above what would be typically encountered in agricultural applications, strongly suggests that PA is unlikely to cause adverse effects on crops and ultimately on the biota and human health.

Algae biotechnology for industrial wastewater treatment, bioenergy production, and high-value bioproducts

A growing world population is causing hazardous compounds to form at an increasingly rapid rate, calling for ecological action. Wastewater management and treatment is an expensive process that requires appropriate integration technology to make it more feasible and cost-effective. Algae are of great interest as potential feedstocks for various applications, including environmental sustainability, biofuel production, and the manufacture of high-value bioproducts. Bioremediation with microalgae is a potential approach to reduce wastewater pollution. The need for effective nutrient recovery, greenhouse gas reduction, wastewater treatment, and biomass reuse has led to a wide interest in the use of microalgae for wastewater treatment. Furthermore, algae biomass can be used to produce bioenergy and high-value bioproducts. The use of microalgae as medicine (production of bioactive and medicinal compounds), biofuels, biofertilizers, and food additives has been explored by researchers around the world. Technological and economic barriers currently prevent the commercial use of algae, and optimal downstream processes are needed to reduce production costs. Therefore, the simultaneous use of microalgae for wastewater treatment and biofuel production could be an economical approach to address these issues. This article provides an overview of algae and their application in bioremediation, bioenergy production, and bioactive compound production. It also highlights the current problems and opportunities in the algae-based sector, which has recently become quite promising.

Phenotypic changes in microalgae at acidic pH mediate their tolerance to higher concentrations of transition metals

•

Acid-tolerant microalgae were grown at pH 3.5 and 6.7 in presence of heavy metals (HMs).

•

HMs-induced phenotypic changes in microalgae were evaluated by ATR-FTIR spectroscopy.

•

Higher HMs bioavailability affected microalgae more at pH 6.7 than pH 3.5.

•

Acclimation of microalgal strains to acidic pH significantly alleviates HMs toxicity.

Acclimatory phenotypic response is a common phenomenon in microalgae, particularly during heavy metal stress. It is not clear so far whether acclimating to one abiotic stressor can alleviate the stress imposed by another abiotic factor. The intent of the present study was to demonstrate the implication of acidic pH in effecting phenotypic changes that facilitate microalgal tolerance to biologically excess concentrations of heavy metals. Two microalgal strains, Desmodesmus sp. MAS1 and Heterochlorella sp. MAS3, were exposed to biologically excess concentrations of Cu (0.50 and 1.0 mg L^‒1), Fe (5 and 10 mg L^‒1), Mn (5 and 10 mg L^‒1) and Zn (2, 5 and 10 mg L^‒1) supplemented to the culture medium at pH 3.5 and 6.7. Chlorophyll autofluorescence and biochemical fingerprinting using FTIR-spectroscopy were used to assess the microalgal strains for phenotypic changes that mediate tolerance to metals. Both the strains responded to acidic pH by effecting differential changes in biochemicals such as carbohydrates, proteins, and lipids. Both the microalgal strains, when acclimated to low pH of 3.5, exhibited an increase in protein (< 2-fold) and lipid (> 1.5-fold). Strain MAS1 grown at pH 3.5 showed a reduction (1.5-fold) in carbohydrates while strain MAS3 exhibited a 17-fold increase in carbohydrates as compared to their growth at pH 6.7. However, lower levels of biologically excess concentrations of the selected transition metals at pH 6.7 unveiled positive or no effect on physiology and biochemistry in microalgal strains, whereas growth with higher metal concentrations at this pH resulted in decreased chlorophyll content. Although the bioavailability of free-metal ions is higher at pH 3.5, as revealed by Visual MINTEQ model, no adverse effect was observed on chlorophyll content in cells grown at pH 3.5 than at pH 6.7. Furthermore, increasing concentrations of Fe, Mn and Zn significantly upregulated the carbohydrate metabolism, but not protein and lipid synthesis, in both strains at pH 3.5 as compared to their growth at pH 6.7. Overall, the impact of pH 3.5 on growth response suggested that acclimation of microalgal strains to acidic pH alleviates metal toxicity by triggering physiological and biochemical changes in microalgae for their survival.

Sustainable mitigation of heavy metals from effluents: Toxicity and fate with recent technological advancements

Increase in anthropogenic activities due to rapid industrialization had caused an elevation in heavy metal contamination of aquatic and terrestrial ecosystems. These pollutants have detrimental effects on human and environmental health. The majority of these pollutants are carcinogenic, neurotoxic, and are very poisonous even at very low concentrations. Contamination caused by heavy metals has become a global concern for which the traditional treatment approaches lack in providing a cost-effective and eco-friendly solution. Therefore, the use of microorganisms and plants to reduce the free available heavy metal present in the environment has become the most acceptable method by researchers. Also, in microbial- and phyto-remediation the redox reaction shifts the valence which makes these metals less toxic. In addition to this, the use of biochar as a remediation tool has provided a sustainable solution that needs further investigations toward its implementation on a larger scale. Enzymes secreted by microbes and whole microbial cell are considered an eco-efficient biocatalyst for mitigation of heavy metals from contaminated sites. To the best of our knowledge there is very less literature available covering remediation of heavy metals aspect along with the sensors used for detection of heavy metals. Systematic management should be implemented to overcome the technical and practical limitations in the use of these bioremediation techniques. The knowledge gaps have been identified in terms of its limitation and possible future directions have been discussed.

A photobioreactor using Nannochloropsis oculata marine microalgae for removal of polycyclic aromatic hydrocarbons and sorption of metals in produced water

The objective of the present work is to evaluate the potential of the removal of PAHs and metal sorption for the treatment of petroleum produced water using a photobioreactor system with Nannochloropsis oculata microalgae. A set of photobioreactors with different gradients of produced water concentration diluted in saline water was designed, establishing five gradients (v/v): 0, 25, 50, 75 and 100%. These concentrations were established to test the removal of PAHs. The microalgal growth was monitored daily, noting the adaptation of microalgae to the addition of produced water as a culture medium, with cell growth of 5.24 × 10⁷ cells mL^-1 from 25% (v/v), 4.09 × 10⁷ cells mL^-1 from 50% (v/v), 2.77 × 10⁷ cells mL^-1 from 75% (v/v), and 1.17 × 10⁷ cells mL^-1 from 100%. The total removal efficiency of PAHs in the produced water was 94%. Organic compounds such as naphthalene, benzo(a)pyrene, benzo(b)fluoranthene, and acenaphthylene showed higher removal percentages, between 89 and 99% efficiency in produced water. Iron and zinc were the metals detected in the water produced, and iron reduced from 1.57 ± 0.08 mg L^-1 to <0.1 mg L^-1 after 28 days of cultivation, whereas zinc increased by 0.23 ± 0.05 to 3.90 ± 0.46 mg L^-1. The PAHs removal may have occurred in two ways, by intracellular bioaccumulation or biodegradation by oxidoreductase enzymes. 0.2 g of dry biomass with maximum extraction of oil obtained 3.07% and generation of 3.70% of protein was considered as value-added products for biodiesel and bioplastics.

Wastewater treatment by microalgae

The growth of the world's population increases the demand for fresh water, food, energy, and technology, which in turn leads to increasing amount of wastewater, produced both by domestic and industrial sources. These different wastewaters contain a wide variety of organic and inorganic compounds which can cause tremendous environmental problems if released untreated. Traditional treatment systems are usually expensive, energy demanding and are often still incapable of solving all challenges presented by the produced wastewaters. Microalgae are promising candidates for wastewater reclamation as they are capable of reducing the amount of nitrogen and phosphate as well as other toxic compounds including heavy metals or pharmaceuticals. Compared to the traditional systems, photosynthetic microalgae require less energy input since they use sunlight as their energy source, and at the same time lower the carbon footprint of the overall reclamation process. This mini-review focuses on recent advances in wastewater reclamation using microalgae. The most common microalgal strains used for this purpose are described as well as the challenges of using wastewater from different origins. We also describe the impact of climate with a particular focus on a Nordic climate.

Potential Applications of Arthrospira platensis Lipid-Free Biomass in Bioremediation of Organic Dye from Industrial Textile Effluents and Its Influence on Marine Rotifer (Brachionus plicatilis)

Arthrospira platensis is one of the most important cultured microalgal species in the world. Arthrospira complete dry biomass (ACDB) has been reported as an interesting feedstock for many industries, including biodiesel production. The A. platensis by-product of biodiesel production (lipid-free biomass; LFB) is a source of proteins, functional molecules, and carbohydrates, and can also be reused in several applications. The current study investigated the efficiency of ACDB and LFB in bioremediation of dye (Ismate violet 2R, IV2R) from textile effluents. In addition, the potential of ACDB and LFB loaded by IV2R as a feed for Rotifer, Brachionus plicatilis, was examined. The surface of the adsorbents was characterized by SEM, FTIR, and Raman analysis to understand the adsorption mechanism. The batch sorption method was examined as a function of adsorbent dose (0.02–0.01 g L⁻¹), solution initial concentration (10–100 mg L⁻¹), pH (2–10), and contact time (15–180 min). The kinetic studies and adsorption isotherm models (Freundlich, Langmuir, Tempkin, and Halsey) were used to describe the interaction between dye and adsorbents. The results concluded that the adsorption process increased with increasing ACDB and LFB dose, contact time (120 min), initial IV2R concentration (10 mg L⁻¹), and acidity pH (2 and 6, respectively). For the elimination of industrial textile wastewater, the ACDB and LFB sorbents have good elimination ability of a dye solution by 75.7% and 61.11%, respectively. The kinetic interaction between dye and adsorbents fitted well to Langmuir, Freundlish, and Halsey models for LFB, and Langmuir for ACDB at optimum conditions with R² > 0.9. In addition, based on the bioassay study, the ACDB and LFB loaded by IV2R up to 0.02 g L⁻¹ may be used as feed for the marine Rotifer B. plicatilis.

Removal of Imidacloprid from Water by Microalgae Nannochloropsis sp. and Its Determination by a Validated RP-HPLC Method

The large-scale use of pesticides is one of the main causes of the dramatic degradation of our environment. Pesticides such as imidacloprid (IMID) have been linked to declines in bee health and toxicity to other beneficial insects. They pose a threat to human health due to their persistence in the environment and accumulation in the food chain. Therefore, it is essential to test possible environmentally-friendly solutions for their elimination. The present study evaluates the efficiency of microalgae Nannochloropsis sp. for the removal of IMID from synthetic wastewater. The influence of aeration, light, and the presence of UV radiation on the degradation of IMID were factors considered in the study. A rapid RP-HPLC method was developed and validated for the analysis and quantification of IMID in the context of bioremediation with microalgae. Nannochloropsis sp. removed 4.39 µg mL^-1 from an initial content of 9.59 µg mL^-1 (reaching approximately 50%) of IMID in the first 20 h. This study demonstrated that the removal of IMID by the marine microalgae Nannochloropsis sp. is both effective and light-dependent.

Modelling and process optimization for biodiesel production from Nannochloropsis salina using artificial neural network

In the present investigation, calcium oxide solid nanocatalyst derived from the egg shell and Nannochloropsis salina were used for the production of biodiesel. The morphological characteristics and functional groups of synthesized nanocatalyst was characterized by SEM and FTIR analysis. Process variables optimization for biodiesel production was studied using RSM and ANN. The R² values for RSM and ANN was found to be 0.8751 and 0.957 which showed that the model was significantly fit with the experimental data. The maximum FAME conversion for the synthesized nanocatalyst CaO was found to be 86.1% under optimum process conditions (nanocatalyst amount: 3% (w/v); oil to methanol ratio 1:6 (v/v); reaction temperature: 60 °C; reaction time 55 min). Concentration of FAME present in biodiesel was identified by GC-MS analysis.

Construction of 2D/2D MoS2/g-C3N4 Heterostructures for Photoreduction of Cr (VI)

2D/2D MoS₂/g-C₃N₄ (MCN) surface heterostructures were created by second thermal polymerization of bulk g-C₃N₄ and the reaction of thiourea and MoO₃ at 670 °C. MoS₂ networks grew vertically along the (002) facet on superior thin g-C₃N₄ nanosheets. The layered heterostructures drastically improved the Cr(VI) removal ability. In the dark case, 27% of Cr(VI) was removed within 45 min. The result indicates that the adsorption of Cr(VI) was a chemical adsorption process involving the sharing and transfer of electrons. The equilibrium data indicate that the adsorbent was covered with a monolayer adsorbate, which conformed to the Langmuir isotherm model (R² = 0.9618). In addition, MCN nanocomposites could convert Cr(VI) into non-toxic Cr(III) by photoreduction under visible light irradiation. With an optimized composition, 100% of Cr(VI) was removed within 30 min, which was ∼10 times quicker compared with Cr(VI) removal under dark conditions. Because g-C₃N₄ nanosheets (sample CN₆₇₀) with higher photocurrent density revealed the lowest photoreduction Cr(VI) ability, adsorption plays an important role in Cr(VI) removal. For MoS₂/g-C₃N₄ nanocomposites used in Cr(VI) removal, adsorption and photoreduction were incorporated together to get excellent performance.

Acid-adapted microalgae exhibit phenotypic changes for their survival in acid mine drainage samples

Phenotypic plasticity or genetic adaptation in an organism provides phenotypic changes when exposed to the extreme environmental conditions. The resultant physiological and metabolic changes greatly enhance the organism's potential for its survival in such harsh environments. In the present novel approach, we tested the hypothesis whether acid-adapted microalgae, initially isolated from non-acidophilic environments, can survive and grow in acid-mine-drainage (AMD) samples. Two acid-adapted microalgal strains, Desmodesmus sp. MAS1 and Heterochlorella sp. MAS3, were tested individually or in combination (co-culture) for phenotypic changes during their growth in samples collected from AMD. The acid-adapted microalgae in AMD exhibited a two-fold increase in growth when compared with those grown at pH 3.5 in BBM up to 48 h and then declined. Furthermore, oxidative stress triggered several alterations such as increased cell size, granularity, and enhanced lipid accumulation in AMD-grown microalgae. Especially, the apparent limitation of phosphate in AMD inhibited the uptake of copper and iron in the cultures. Interestingly, growth of the acid-adapted microalgae in AMD downregulated amino acid metabolic pathways as a survival mechanism. This study demonstrates for the first time that acid-adapted microalgae can survive under extreme environmental conditions as exist in AMD by effecting significant phenotypic changes.

Semi-batch cultivation of Chlorella sorokiniana AK-1 with dual carriers for the effective treatment of full strength piggery wastewater treatment

In this study, process optimization for the microalgae-based piggery wastewater treatment was carried out by growing Chlorella sorokiniana AK-1 on untreated piggery wastewater with efficient COD/BOD/TN/TP removal and high biomass/protein productivities. Integration of the immobilization carriers (sponge, activated carbon) and semi-batch cultivation resulted in the effective treatment of raw untreated piggery wastewater. With 100% wastewater, 0.2% sponge and 2% activated carbon, the semi-batch cultivation (90% media replacement every 6 days) exhibited a COD, BOD, TN and TP removal efficiency of 95.7%, 99.0%, 94.1% and 96.9%, respectively. The maximal protein content, protein productivity, lutein content, and lutein productivity of the obtained microalgal biomass was 61.1%, 0.48 g/L/d, 4.56 mg/g, and 3.56 mg/L/d, respectively. The characteristics of the treated effluent satisfied Taiwan Piggery Wastewater Discharge Standards (COD < 600 mg/L, BOD < 80 mg/L). This innovative approach demonstrated excellent performance for simultaneous piggery wastewater treatment and microalgal biomass production.

Selection and re-acclimation of bioprospected acid-tolerant green microalgae suitable for growth at low pH

For mass culture of photosynthetic green microalgae, industrial flue gases can represent a low-cost resource of CO₂. However, flue gases are often avoided, because they often also contain high levels of SO₂ and/or NO₂, which cause significant acidification of media to below pH 3 due to production of sulfuric and nitric acid. This creates an unsuitable environment for the neutrophilic microalgae commonly used in large-scale commercial production. To address this issue, we have looked at selecting acid-tolerant microalgae via growth at pH 2.5 carried out with samples bioprospected from an active smelter site. Of the eight wild samples collected, one consisting mainly of Coccomyxa sp. grew at pH 2.5 and achieved a density of 640 mg L^-1. Furthermore, three previously bioprospected green microalgae from acidic waters (pH 3-4.5) near abandoned mine sites were also re-acclimated down to their in-situ pH environment after approximately 4 years spent at neutral pH. Of those three, an axenic culture of Coccomyxa sp. was the most successful at re-acclimating and achieved the highest density of 293.1 mg L^-1 and maximum daily productivity of 38.8 mg L^-1 day^-1 at pH 3. Re-acclimation of acid-tolerant species is, therefore, achievable when directly placed at their original pH, but gradual reduction in pH is recommended to give the cells time to acclimate.

An overview on heavy metal resistant microorganisms for simultaneous treatment of multiple chemical pollutants at co-contaminated sites, and their multipurpose application

Anthropogenic imbalance of chemical pollutants in environment raises serious threat to all life forms. Contaminated sites often possess multiple heavy metals and other types of pollutants. Elimination of chemical pollutants at co-contaminated sites is imperative for the safe ecosystem functions, and simultaneous removal approach is an attractive scheme for their remediation. Different conventional techniques have been applied as concomitant treatment solution but fall short at various parameters. In parallel, use of microorganisms offers an innovative, cost effective and ecofriendly approach for simultaneous treatment of various chemical pollutants. However, microbiostasis due to harmful effects of heavy metals or other contaminants is a serious bottleneck facing remediation practices in co-contaminated sites. But certain microorganisms have unique mechanisms to resist heavy metals, and can act on different noxious wastes. Considering this significant, my review provides information on different heavy metal resistant microorganisms for bioremediation of different chemical pollutants, and other assistance. In this favour, the integrated approach of simultaneous treatment of multiple heavy metals and other environmental contaminants using different heavy metal resistant microorganisms is summarized. Further, the discussion also intends toward the use of heavy metal resistant microorganisms associated with industrial and environmental applications, and healthcare. PREFACE: Simultaneous treatment of multiple chemical pollutants using microorganisms is relatively a new approach. Therefore, this subject was not well received for review before. Also, multipurpose application of heavy metal microorganisms has certainly not considered for review. In this regard, this review attempts to gather information on recent progress on studies on different heavy metal resistant microorganisms for their potential of treatment of co-contaminated sites, and multipurpose application.

Removal of pollutants from biogas slurry and CO2 capture in biogas by microalgae-based technology: a systematic review

Recent research interest has focused on microalgae cultivation for biogas slurry purification and biogas upgrading due to the requirement of high efficiency for nutrient uptake and CO₂ capture, with economic feasibility and environmental benefits. Numerous studies have suggested that biogas slurry purification and biogas upgrading can occur simultaneously via microalgae-based technology. However, there is no comprehensive review on this technology with respect to the nutrient removal from biogas slurry and biogas upgrading. This article summarizes microalgal cultivation with biogas slurry and biogas from anaerobic digestion. The parameters, techniques, and modes of microalgae cultivation have been discussed in detail to achieve high efficiency in biogas slurry purification and biogas upgrading. In addition, the evaluation of energy efficiency and safety has also been explored. Compared with mono-cultivation of microalgae and co-cultivation of microalgae and bacteria, microalgae-fungi symbiosis has demonstrated greater development prospect and higher energy efficiency and the energy consumption for pollutants and CO₂ removal were 14.2-39.0% · USD^-1 and 19.9-23.3% · USD^-1, respectively. Further, a sustainable recycling scheme is proposed for the purification of biogas slurry from anaerobic digestion process and biogas upgrading via microalgae-based technology.

Physiological and morphological responses and tolerance mechanisms of Isochrysis galbana to Cr(VI) stress

The effects of the initial concentrations of Cr(VI) on chlorophyll-a (Chl-a), soluble protein and ultrastructure were investigated. Results showed that <0.5 and >1.0 mg L^-1 Cr(VI) stimulated and inhibited the growth of Isochrysis galbana, respectively. The tolerance mechanisms of I. galbana to Cr(VI) included the following: (1) increased activities of superoxide dismutase (SOD) and peroxidase (POX) for peroxidative damage resistance, (2) accumulation of Cr(VI) on the cell surface and inside the cell for detoxification and (3) conversion of intracellular Cr(VI) to less toxic Cr(III) as indicated by X-ray photoelectron spectroscopy (XPS) results. Cr(VI) enrichment by I. galbana may cause damage to marine ecology and human bodies through the food chain. The tolerance mechanisms of I. galbana to Cr(VI) may be potentially used to treat low-concentration Cr(VI) wastewater. Therefore, the responses and tolerance mechanisms of I. galbana to Cr(VI) must be further studied.

Resource recovery from wastewaters using microalgae-based approaches: A circular bioeconomy perspective

The basic concepts of circular bioeconomy are reduce, reuse and recycle. Recovery of recyclable nutrients from secondary sources could play a key role in meeting the increased demands of the growing population. Wastewaters of different origin are rich in energy and nutrients sources that can be recovered and reused in a circular bioeconomy perspective. Microalgae can effectively utilize wastewater nutrients for growth and biomass production. Integration of wastewater treatment and microalgal cultivation improves the environmental impacts of the currently used wastewater treatment methods. This review provides comprehensive information on the potential of using microalgae for the recovery of carbon, nitrogen, phosphorus and other micronutrients from wastewaters. Major factors influencing large scale microalgal wastewater treatment are discussed and future research perspectives are proposed to foster the future development in this area.

Sustainable Iron Recovery and Biodiesel Yield by Acid-Adapted Microalgae, Desmodesmus sp. MAS1 and Heterochlorella sp. MAS3, Grown in Synthetic Acid Mine Drainage

Sustainable resource recovery is the key to manage the overburden of various waste entities of mining practices. The present study demonstrates for the first time a novel approach for iron recovery and biodiesel yield from two acid-adapted microalgae, Desmodesmus sp. MAS1 and Heterochlorella sp. MAS3, grown in synthetic acid mine drainage (SAMD). Virtually, there was no difference in the growth of the strain MAS3 both in Bold's basal medium (control) and SAMD. Using the IC50 level (200 mg L-1) and a lower concentration (50 mg L-1) of iron in SAMD, the cell granularity, exopolysaccharide (EPS) secretion, iron recovery, and biodiesel were assessed in both the strains. Both cell granularity and accumulation of EPS were significantly altered under metal stress in SAMD, resulting in an increase in total accumulation of iron. Growth of the microalgal strains in SAMD yielded 12-20% biodiesel, with no traces of heavy metals, from the biomass. The entire amount of iron, accumulated intracellularly, was recovered in the residual biomass. Our results on the ability of the acid-adapted microalgal strains in iron recovery and yield of biodiesel when grown in SAMD indicate that they could be the potential candidates for use in bioremediation of extreme habitats like AMD.

Influence of organic matter and CO2 supply on bioremediation of heavy metals by Chlorella vulgaris and Scenedesmus almeriensis in a multimetallic matrix

This research evaluated the influence of organic matter (OM) and CO₂ addition on the bioremediation potential of two microalgae typically used for wastewater treatment: Chlorella vulgaris (CV) and Scenedesmus almeriensis (SA). The heavy metal (HM) removal efficiencies and biosorption capacities of both microalgae were determined in multimetallic solutions (As, B, Cu, Mn, and Zn) mimicking the highest pollutant conditions found in the Loa river (Northern Chile). The presence of OM decreased the total biosorption capacity, specially in As (from 2.2 to 0.0 mg/g for CV and from 2.3 to 1.7 mg/g for SA) and Cu (from 3.2 to 2.3 mg/g for CV and from 2.1 to 1.6 mg/g for SA), but its influence declined over time. CO₂ addition decreased the total HM biosorption capacity for both microalgae species and inhibited CV growth. Finally, metal recovery using different eluents (HCl, NaOH, and CaCl₂) was evaluated at two different concentrations. HCl 0.1 M provided the highest recovery efficiencies, which supported values over 85% of As, 92% of Cu, and ≈100% of Mn and Zn from SA. The presence of OM during the loaded stage resulted in a complete recovery of As, Cu, Mn, and Zn when using HCl 0.1 M as eluent.

Acid-tolerant microalgae can withstand higher concentrations of invasive cadmium and produce sustainable biomass and biodiesel at pH 3.5

Two acid-tolerant microalgae, Desmodesmus sp. MAS1 and Heterochlorella sp. MAS3, originally isolated from non-acidophilic environment, were tested for their ability to withstand higher concentrations of an invasive heavy metal, cadmium (Cd), at an acidic pH of 3.5 and produce biomass rich in biodiesel. The growth analysis, in terms of chlorophyll, revealed that strain MAS1 was tolerant even to 20 mg L^-1 of Cd while strain MAS3 could withstand only up to 5 mg L^-1. When grown in the presence of 2 mg L^-1, a concentration which is 400-fold higher than that usually occurs in the environment, the microalgal strains accumulated >58% of Cd from culture medium at pH 3.5. FTIR analysis of Cd-laden biomass indicated production of significant amounts of biodiesel rich in fatty acid esters. This is the first study that demonstrates the capability of acid-tolerant microalgae to grow well and remove Cd at acidic pH.