Performance of different methanogenic species for the microbial electrosynthesis of methane from carbon dioxide

Biofilms for Production of Chemicals and Energy

The twenty-first century will be the century of biology. This is not only because of breakthrough advances in molecular biology tools but also because we need to reinvent our economy based on the biological principles of energy efficiency and sustainability. Consequently, new tools for production routines must be developed to help produce platform chemicals and energy sources based on sustainable resources. In this context, biofilm-based processes have the potential to impact future production processes, because they can be carried out continuously and with robust stationary biocatalysts embedded in an extracellular matrix with different properties. We review productive biofilm systems used for heterotrophic and lithoautotrophic production and attempt to identify fundamental reasons why they may be particularly suitable as future production systems.

Relevance of extracellular electron uptake mechanisms for electromethanogenesis applications

Electromethanogenesis has emerged as a biological branch of Power-to-X technologies that implements methanogenic microorganisms, as an alternative to chemical Power-to-X, to convert electrical power from renewable sources, and CO2 into methane. Unlike biomethanation processes where CO2 is converted via exogenously added hydrogen, electromethanogenesis occurs in a bioelectrochemical set-up that combines electrodes and microorganisms. Thereby, mixed, or pure methanogenic cultures catalyze the reduction of CO2 to methane via reducing equivalents supplied by a cathode. Recent advances in electromethanogenesis have been driven by interdisciplinary research at the intersection of microbiology, electrochemistry, and engineering. Integrating the knowledge acquired from these areas is essential to address the specific challenges presented by this relatively young biotechnology, which include electron transfer limitations, low energy and product efficiencies, and reactor design to enable upscaling. This review approaches electromethanogenesis from a multidisciplinary perspective, putting emphasis on the extracellular electron uptake mechanisms that methanogens use to obtain energy from cathodes, since understanding these mechanisms is key to optimize the electrochemical conditions for the development of these systems. This work summarizes the direct and indirect extracellular electron uptake mechanisms that have been elucidated to date in methanogens, along with the ones that remain unsolved. As the study of microbial corrosion, a similar bioelectrochemical process with Fe0 as electron source, has contributed to elucidate different mechanisms on how methanogens use solid electron donors, insights from both fields, biocorrosion and electromethanogenesis, are combined. Based on the repertoire of mechanisms and their potential to convert CO2 to methane, we conclude that for future applications, electromethanogenesis should focus on the indirect mechanism with H2 as intermediary. By summarizing and linking the general aspects and challenges of this process, we hope that this review serves as a guide for researchers working on electromethanogenesis in different areas of expertise to overcome the current limitations and continue with the optimization of this promising interdisciplinary technology.

Metabolic engineering strategies to enable microbial electrosynthesis utilization of CO2: recent progress and challenges

Microbial electrosynthesis (MES) is a promising technology that mainly utilizes microbial cells to convert CO2 into value-added chemicals using electrons provided by the cathode. However, the low electron transfer rate is a solid bottleneck hindering the further application of MES. Thus, as an effective strategy, genetic tools play a key role in MES for enhancing the electron transfer rate and diversity of production. We describe a set of genetic strategies based on fundamental characteristics and current successes and discuss their functional mechanisms in driving microbial electrocatalytic reactions to fully comprehend the roles and uses of genetic tools in MES. This paper also analyzes the process of nanomaterial application in extracellular electron transfer (EET). It provides a technique that combines nanomaterials and genetic tools to increase MES efficiency, because nanoparticles have a role in the production of functional genes in EET although genetic tools can subvert MES, it still has issues with difficult transformation and low expression levels. Genetic tools remain one of the most promising future strategies for advancing the MES process despite these challenges.

Effect of model methanogens on the electrochemical activity, stability, and microbial community structure of Geobacter spp. dominated biofilm anodes

Combining anaerobic digestion (AD) and microbial electrochemical technologies (MET) in AD-MET holds great potential. Methanogens have been identified as one cause of decreased electrochemical activity and deterioration of Geobacter spp. biofilm anodes. A better understanding of the different interactions between methanogenic genera/species and Geobacter spp. biofilms is needed to shed light on the observed reduction in electrochemical activity and stability of Geobacter spp. dominated biofilms as well as observed changes in microbial communities of AD-MET. Here, we have analyzed electrochemical parameters and changes in the microbial community of Geobacter spp. biofilm anodes when exposed to three representative methanogens with different metabolic pathways, i.e., Methanosarcina barkeri, Methanobacterium formicicum, and Methanothrix soehngenii. M. barkeri negatively affected the performance and stability of Geobacter spp. biofilm anodes only in the initial batches. In contrast, M. formicicum did not affect the stability of Geobacter spp. biofilm anodes but caused a decrease in maximum current density of ~37%. M. soehngenii induced a coloration change of Geobacter spp. biofilm anodes and a decrease in the total transferred charge by ~40%. Characterization of biofilm samples after each experiment by 16S rRNA metabarcoding, whole metagenome nanopore sequencing, and shotgun sequencing showed a higher relative abundance of Geobacter spp. after exposure to M. barkeri as opposed to M. formicicum or M. soehngenii, despite the massive biofilm dispersal observed during initial exposure to M. barkeri.

Alternating polarity as a novel strategy for building synthetic microbial communities capable of robust Electro-Methanogenesis

Electro-methanogenic microbial communities can produce biogas with high efficiency and have attracted extensive research interest. In this study an alternating polarity strategy was developed to build electro-methanogenic communities. In two-chamber bioelectrochemical systems amended with activated carbon, the electrode potential was alternated between +0.8 V and -0.4 V vs. standard hydrogen electrode every three days. Cumulative biogas production under alternating polarity increased from 45 L/L/kg-activated carbon after start-up to 125 L/L/kg after the 4th enrichment, significantly higher than that under intermittent cathode (-0.4 V/open circuit), continuous cathode (-0.4 V), and open circuit. The communities assembled under alternating polarity were electroactive and structurally different from those assembled under other conditions. One Methanobacterium population and two Geobacter populations were consistently abundant and active in the communities. Their 16S rRNA was up-regulated by electrode potentials. Bayesian networks inferred close associations between these populations. Overall, electro-methanogenic communities have been successfully assembled with alternating polarity.

Bioelectrocatalytic Synthesis: Concepts and Applications

Bioelectrocatalytic synthesis is the conversion of electrical energy into value-added products using biocatalysts. These methods merge the specificity and selectivity of biocatalysis and energy-related electrocatalysis to address challenges in the sustainable synthesis of pharmaceuticals, commodity chemicals, fuels, feedstocks and fertilizers. However, the specialized experimental setups and domain knowledge for bioelectrocatalysis pose a significant barrier to adoption. This review introduces key concepts of bioelectrosynthetic systems. We provide a tutorial on the methods of biocatalyst utilization, the setup of bioelectrosynthetic cells, and the analytical methods for assessing bioelectrocatalysts. Key applications of bioelectrosynthesis in ammonia production and small-molecule synthesis are outlined for both enzymatic and microbial systems. This review serves as a necessary introduction and resource for the non-specialist interested in bioelectrosynthetic research.

A comprehensive analysis of key factors influencing methane production from CO2 using microbial methanogenesis cells

With increasing attention on carbon capture and utilization (CCU) technologies for the conversion of CO2 into chemical products, microbial methanogenesis cells (MMCs) have been extensively studied over the past few decades for biomethane production. Using rapidly accumulating data for MMCs with varying configurations and operating conditions, a comprehensive analysis was conducted here to investigate the critical factors that influence methane production rates (MPR) in these systems. A comparison of MPR and set potentials or current densities showed weak linear relationships (R2 < 0.6, p < 0.05), indicating the significant contributions of other important factors impacting methane production. A non-quantitative analysis of these additional parameters indicated the potential importance of using metal catalysts for anode materials where oxygen evolution reaction occurs, while most previous MMC research focused more on cathode materials where the biocatalytic reaction occurs. The use of undefined mixed anaerobic cultures as inocula was found to be sufficient for producing high MPRs, as the electrochemical environment at the cathode provides a strong selective pressure to converge on desirable methanogenic cultures. Other operational parameters, such as catholyte pH control and CO2 supply methods, were also important factors impacting MPR in MMCs, indicating the cumulative impact of these various factors will require careful consideration in future research.

Role of microbial electrosynthesis system in CO2 capture and conversion: a recent advancement toward cathode development

Microbial electrosynthesis (MES) is an emerging electrochemical technology currently being researched as a CO₂ sequestration method to address climate change. MES can convert CO₂ from pollution or waste materials into various carbon compounds with low energy requirements using electrogenic microbes as biocatalysts. However, the critical component in this technology, the cathode, still needs to perform more effectively than other conventional CO₂ reduction methods because of poor selectivity, complex metabolism pathways of microbes, and high material cost. These characteristics lead to the weak interactions of microbes and cathode electrocatalytic activities. These approaches range from cathode modification using conventional engineering approaches to new fabrication methods. Aside from cathode development, the operating procedure also plays a critical function and strategy to optimize electrosynthesis production in reducing operating costs, such as hybridization and integration of MES. If this technology could be realized, it would offer a new way to utilize excess CO₂ from industries and generate profitable commodities in the future to replace fossil fuel-derived products. In recent years, several potential approaches have been tested and studied to boost the capabilities of CO₂-reducing bio-cathodes regarding surface morphology, current density, and biocompatibility, which would be further elaborated. This compilation aims to showcase that the achievements of MES have significantly improved and the future direction this is going with some recommendations. Highlights - MES approach in carbon sequestration using the biotic component.- The role of microbes as biocatalysts in MES and their metabolic pathways are discussed.- Methods and materials used to modify biocathode for enhancing CO₂ reduction are presented.

Microbial electrosynthesis with Clostridium ljungdahlii benefits from hydrogen electron mediation and permits a greater variety of products

Microbial electrosynthesis (MES) is a very promising technology addressing the challenge of carbon dioxide recycling into organic compounds, which might serve as building blocks for the (bio)chemical industry. However, poor process control and understanding of fundamental aspects such as the microbial extracellular electron transfer (EET) currently limit further developments. In the model acetogen Clostridium ljungdahlii, both direct and indirect electron consumption via hydrogen have been proposed. However, without clarification neither targeted development of the microbial catalyst nor process engineering of MES are possible. In this study, cathodic hydrogen is demonstrated to be the dominating electron source for C. ljungdahlii at electroautotrophic MES allowing for superior growth and biosynthesis, compared to previously reported MES using pure cultures. Hydrogen availability distinctly controlled an either planktonic- or biofilm-dominated lifestyle of C. ljungdahlii. The most robust operation yielded higher planktonic cell densities in a hydrogen mediated process, which demonstrated the uncoupling of growth and biofilm formation. This coincided with an increase of metabolic activity, acetate titers, and production rates (up to 6.06 g L^-1 at 0.11 g L^-1 d^-1). For the first time, MES using C. ljungdahlii was also revealed to deliver other products than acetate in significant amounts: here up to 0.39 g L^-1 glycine or 0.14 g L^-1 ethanolamine. Hence, a deeper comprehension of the electrophysiology of C. ljungdahlii was shown to be key for designing and improving bioprocess strategies in MES research.

The material-microorganism interface in microbial hybrid electrocatalysis systems

This review presents a comprehensive summary of the material-microorganism interface in microbial hybrid electrocatalysis systems. Microbial hybrid electrocatalysis has been developed to combine the advantages of inorganic electrocatalysis and microbial catalysis. However, electron transfer at the interfaces between microorganisms and materials is a very critical issue that affects the efficiency of the system. Therefore, this review focuses on the electron transfer at the material-microorganism interface and the strategies for building efficient microorganism and material interfaces. We begin with a brief introduction of the electron transfer mechanism in both the bioanode and biocathode of bioelectrochemical systems to understand the material-microorganism interface. Next, we summarise the strategies for constructing efficient material-microorganism interfaces including material design and modification and bacterial engineering. We also discuss emerging studies on the bio-inorganic hybrid electrocatalysis system. Understanding the interface between electrode/active materials and the microorganisms, especially the electron transfer processes, could help to drive the evolution of material-microorganism hybrid electrocatalysis systems towards maturity.

Recent Applications and Strategies to Enhance Performance of Electrochemical Reduction of CO2 Gas into Value-Added Chemicals Catalyzed by Whole-Cell Biocatalysts

Carbon dioxide (CO2) is one of the major greenhouse gases that has been shown to cause global warming. Decreasing CO2 emissions plays an important role to minimize the impact of climate change. The utilization of CO2 gas as a cheap and sustainable source to produce higher value-added chemicals such as formic acid, methanol, methane, and acetic acid has been attracting much attention. The electrochemical reduction of CO2 catalyzed by whole-cell biocatalysts is a promising process for the production of value-added chemicals because it does not require costly enzyme purification steps and the supply of exogenous cofactors such as NADH. This study covered the recent applications of the diversity of microorganisms (pure cultures such as Shewanella oneidensis MR1, Sporomusa species, and Clostridium species and mixed cultures) as whole-cell biocatalysts to produce a wide range of value-added chemicals including methane, carboxylates (e.g., formate, acetate, butyrate, caproate), alcohols (e.g., ethanol, butanol), and bioplastics (e.g., Polyhydroxy butyrate). Remarkably, this study provided insights into the molecular levels of the proteins/enzymes (e.g., formate hydrogenases for CO2 reduction into formate and electron-transporting proteins such as c-type cytochromes) of microorganisms which are involved in the electrochemical reduction of CO2 into value-added chemicals for the suitable application of the microorganism in the chemical reduction of CO2 and enhancing the catalytic efficiency of the microorganisms toward the reaction. Moreover, this study provided some strategies to enhance the performance of the reduction of CO2 to produce value-added chemicals catalyzed by whole-cell biocatalysts.

Bioelectrocatalysis for CO2 reduction: recent advances and challenges to develop a sustainable system for CO2 utilization

Activation and turning CO₂ into value added products is a promising orientation to address environmental issues caused by CO₂ emission. Currently, electrocatalysis has a potent well-established role for CO₂ reduction with fast electron transfer rate; but it is challenged by the poor selectivity and low faradic efficiency. On the other side, biocatalysis, including enzymes and microbes, has been also employed for CO₂ conversion to target C_n products with remarkably high selectivity; however, low solubility of CO₂ in the liquid reaction phase seriously affects the catalytic efficiency. Therefore, a new synergistic role in bioelectrocatalysis for CO₂ reduction is emerging thanks to its outstanding selectivity, high faradic efficiency, and desirable valuable C_n products under mild condition that are surveyed in this review. Herein, we comprehensively discuss the results already obtained for the integration craft of enzymatic-electrocatalysis and microbial-electrocatalysis technologies. In addition, the intrinsic nature of the combination is highly dependent on the electron transfer. Thus, both direct electron transfer and mediated electron transfer routes are modeled and concluded. We also explore the biocompatibility and synergistic effects of electrode materials, which emerge in combination with tuned enzymes and microbes to improve catalytic performance. The system by integrating solar energy driven photo-electrochemical technics with bio-catalysis is further discussed. We finally highlight the significant findings and perspectives that have provided strong foundations for the remarkable development of green and sustainable bioelectrocatalysis for CO₂ reduction, and that offer a blueprint for C_n valuable products originate from CO₂ under efficient and mild conditions.

A unified and simple medium for growing model methanogens

Apart from their archetypic use in anaerobic digestion (AD) methanogenic archaea are targeted for a wide range of applications. Using different methanogenic archaea for one specific application requires the optimization of culture media to enable the growth of different strains under identical environmental conditions, e.g., in microbial electrochemical technologies (MET) for (bio)electromethanation. Here we present a new culture medium (BFS01) adapted from the DSM-120 medium by omitting resazurin, yeast extract, casitone, and using a low salt concentration, that was optimized for Methanosarcina barkeri, Methanobacterium formicicum, and Methanothrix soehngenii. The aim was to provide a medium for follow-up co-culture studies using specific methanogens and Geobacter spp. dominated biofilm anodes. All three methanogens showed growth and activity in the BFS01 medium. This was demonstrated by estimating the specific growth rates ( μ ) and doubling times ( t d ) of each methanogen. The μ and t d based on methane accumulation in the headspace showed values consistent with literature values for M. barkeri and M. soehngenii. However, μ and t d based on methane accumulation in the headspace differed from literature data for M. formicicum but still allowed sufficient growth. The lowered salt concentration and the omission of chemically complex organic components in the medium may have led to the observed deviation from μ and t d for M. formicicum as well as the changed morphology. 16S rRNA gene-based amplicon sequencing and whole genome nanopore sequencing further confirmed purity and species identity.

Fundamentals and recent progress in bioelectrochemical system-assisted biohythane production

Biohythane, a balanced mixture of 10%-30% v/v of hydrogen and 70%-90% v/v of methane, could be the backbone of an all-purpose future energy supply. Recently, bioelectrochemical systems (BES) became a new sensation among environmental biotechnology processes with the potential to sustainably generate biohythane. Therefore, to unleash its full potential for scaling up, researchers are consistently improving microbial metabolic pathways, novel reactors, and electrode designs. This review presents a detailed analysis of recently discovered fundamental mechanisms and science and engineering intervention of different strategies to improve the biohythane composition and production rate from BES. However, several milestones are to be achieved, for instance, improving electrode kinetics using efficient catalysts, engineered microbial communities, and improved reactor configurations, for commercializing this sustainable technology. Thus, a future perspective section is included to recommend novel research lines, mainly focusing on the microbial communities and the efficient electrocatalysts, to enhance reactor performance.

Accelerating anaerobic digestion process with novel single chamber microbial electrochemical systems with baffle

A newly designed microbial electrochemical system (MES) with the addition of a baffle between the electrodes was integrated with the anaerobic digestion (AD) process for biogas upgradation. Novel MES configuration attained an increased methane production rate of 292.6 mL/L∙d and methane yield of 0.36 ± 0.006 [Formula: see text] /g_COD, which were higher than the values (185.3 mL/L∙d and 0.33 ± 0.009 [Formula: see text] /g_COD) from the MES operation without baffle, respectively. Moreover, the MES with baffle operation resulted in increased substrate removal (88.4 ± 0.5%) and less volatile fatty acids accumulation with a high energy efficiency of 99.6 %. Microbial community analysis revealed that acids metabolizing bacteria, Firmicutes, and Methanothrix were highly enriched in the cathode biofilm of MES with baffle. This study suggests that the baffle addition into the single chamber MES is beneficial to further improve the methanogenesis process for practical applications in the scaled-up MES-AD process.

High-rate microbial electrosynthesis using a zero-gap flow cell and vapor-fed anode design

Microbial electrosynthesis (MES) cells use renewable energy to convert carbon dioxide into valuable chemical products such as methane and acetate, but chemical production rates are low and pH changes can adversely impact biocathodes. To overcome these limitations, an MES reactor was designed with a zero-gap electrode configuration with a cation exchange membrane (CEM) to achieve a low internal resistance, and a vapor-fed electrode to minimize pH changes. Liquid catholyte was pumped through a carbon felt cathode inoculated with anaerobic digester sludge, with humidified N₂ gas flowing over the abiotic anode (Ti or C with a Pt catalyst) to drive water splitting. The ohmic resistance was 2.4 ± 0.5 mΩ m², substantially lower than previous bioelectrochemical systems (20-25 mΩ m²), and the catholyte pH remained near-neutral (6.6-7.2). The MES produced a high methane production rate of 2.9 ± 1.2 L/L-d (748 mmol/m²-d, 17.4 A/m²; Ti/Pt anode) at a relatively low applied voltage of 3.1 V. In addition, acetate was produced at a rate of 940 ± 250 mmol/m²-d with 180 ± 30 mmol/m²-d for propionate. The biocathode microbial community was dominated by the methanogens of the genus Methanobrevibacter, and the acetogen of the genus Clostridium sensu stricto 1. These results demonstrate the utility of this zero-gap cell and vapor-fed anode design for increasing rates of methane and chemical production in MES.

Microbial electrosynthesis of methane and acetate—comparison of pure and mixed cultures

Abstract

The electrochemical process of microbial electrosynthesis (MES) is used to drive the metabolism of electroactive microorganisms for the production of valuable chemicals and fuels. MES combines the advantages of electrochemistry, engineering, and microbiology and offers alternative production processes based on renewable raw materials and regenerative energies. In addition to the reactor concept and electrode design, the biocatalysts used have a significant influence on the performance of MES. Thus, pure and mixed cultures can be used as biocatalysts. By using mixed cultures, interactions between organisms, such as the direct interspecies electron transfer (DIET) or syntrophic interactions, influence the performance in terms of productivity and the product range of MES. This review focuses on the comparison of pure and mixed cultures in microbial electrosynthesis. The performance indicators, such as productivities and coulombic efficiencies (CEs), for both procedural methods are discussed. Typical products in MES are methane and acetate, therefore these processes are the focus of this review. In general, most studies used mixed cultures as biocatalyst, as more advanced performance of mixed cultures has been seen for both products. When comparing pure and mixed cultures in equivalent experimental setups a 3-fold higher methane and a nearly 2-fold higher acetate production rate can be achieved in mixed cultures. However, studies of pure culture MES for methane production have shown some improvement through reactor optimization and operational mode reaching similar performance indicators as mixed culture MES. Overall, the review gives an overview of the advantages and disadvantages of using pure or mixed cultures in MES.

Key points

• Undefined mixed cultures dominate as inoculums for the MES of methane and acetate, which comprise a high potential of improvement

• Under similar conditions, mixed cultures outperform pure cultures in MES

• Understanding the role of single species in mixed culture MES is essential for future industrial applications

The integration of bio-catalysis and electrocatalysis to produce fuels and chemicals from carbon dioxide

The dependence on fossil fuels has caused excessive emissions of greenhouse gases (GHGs), leading to climate changes and global warming. Even though the expansion of electricity generation will enable a wider use of electric vehicles, biotechnology represents an attractive route for producing high-density liquid transportation fuels that can reduce GHG emissions from jets, long-haul trucks and ships. Furthermore, to achieve immediate alleviation of the current environmental situation, besides reducing carbon footprint it is urgent to develop technologies that transform atmospheric CO₂ into fossil fuel replacements. The integration of bio-catalysis and electrocatalysis (bio-electrocatalysis) provides such a promising avenue to convert CO₂ into fuels and chemicals with high-chain lengths. Following an overview of different mechanisms that can be used for CO₂ fixation, we will discuss crucial factors for electrocatalysis with a special highlight on the improvement of electron-transfer kinetics, multi-dimensional electrocatalysts and their hybrids, electrolyser configurations, and the integration of electrocatalysis and bio-catalysis. Finally, we prospect key advantages and challenges of bio-electrocatalysis, and end with a discussion of future research directions.

Regulation and augmentation of anaerobic digestion processes via the use of bioelectrochemical systems

Anaerobic digestion (AD) is a biological process that can be used to treat a wide range of carbon-rich wastes and producerenewable, green energy. To maximize energy recovery from various resources while controlling inhibitory chemicals, notwithstanding AD's efficiency, many limitations must be addressed. As a result, bioelectrochemical systems (BESs) have emerged as a hybrid technology, extensively studied to remediate AD inhibitory chemicals, increase AD operating efficacy, and make the process economically viable via integration approaches. Biogas and residual intermediatory metabolites such as volatile fatty acids are upgraded to value-added chemicals and fuels with the help of the BES as a pre-treatment step, within AD or after the AD process. It may also be used directly to generate power. To overcome the constraints of AD in lab-scale applications, this article summarizes BES technology and operations and endorses ways to scale up BES-AD systems in the future.

Quantitative assessment of exposure to fecal contamination in urban environment across nine cities in low-income and lower-middle-income countries and a city in the United States

BACKGROUND

During 2014 to 2019, the SaniPath Exposure Assessment Tool, a standardized set of methods to evaluate risk of exposure to fecal contamination in the urban environment through multiple exposure pathways, was deployed in 45 neighborhoods in ten cities, including Accra and Kumasi, Ghana; Vellore, India; Maputo, Mozambique; Siem Reap, Cambodia; Atlanta, United States; Dhaka, Bangladesh; Lusaka, Zambia; Kampala, Uganda; Dakar, Senegal.

OBJECTIVE

Assess and compare risk of exposure to fecal contamination via multiple pathways in ten cities.

METHODS

In total, 4053 environmental samples, 4586 household surveys, 128 community surveys, and 124 school surveys were collected. E. coli concentrations were measured in environmental samples as an indicator of fecal contamination magnitude. Bayesian methods were used to estimate the distributions of fecal contamination concentration and contact frequency. Exposure to fecal contamination was estimated by the Monte Carlo method. The contamination levels of ten environmental compartments, frequency of contact with those compartments for adults and children, and estimated exposure to fecal contamination through any of the surveyed environmental pathways were compared across cities and neighborhoods.

RESULTS

Distribution of fecal contamination in the environment and human contact behavior varied by city. Universally, food pathways were the most common dominant route of exposure to fecal contamination across cities in low-income and lower-middle-income countries. Risks of fecal exposure via water pathways, such as open drains, flood water, and municipal drinking water, were site-specific and often limited to smaller geographic areas (i.e., neighborhoods) instead of larger areas (i.e., cities).

CONCLUSIONS

Knowledge of the relative contribution to fecal exposure from multiple pathways, and the environmental contamination level and frequency of contact for those "dominant pathways" could provide guidance for Water, Sanitation, and Hygiene (WASH) programming and investments and enable local governments and municipalities to improve intervention strategies to reduce the risk of exposure to fecal contamination.

Electrotrophy: Other microbial species, iron, and electrodes as electron donors for microbial respirations

Electrotrophy, the growth of microbes on extracellular electron donors, drives important biogeochemical cycles and has practical applications. Studies of Fe(II)-based electrotrophy have provided foundational cytochrome-based mechanistic models for electron transport into cells. Direct electron uptake from other microbial species, Fe(0), or cathodes is of intense interest due to its potential roles in the production and anaerobic oxidation of methane, corrosion, and bioelectrochemical technologies. Other cells or Fe(0) can serve as the sole electron donor supporting the growth of several Geobacter and methanogen strains that are unable to use H₂ as an electron donor, providing strong evidence for electrotrophy. Additional evidence for electrotrophy in Geobacter strains and Methanosarcina acetivorans is a requirement for outer-surface c-type cytochromes. However, in most instances claims for electrotrophy in anaerobes are based on indirect inference and the possibility that H₂ is actually the electron donor supporting growth has not been rigorously excluded.

Application of bioelectrochemical systems to regulate and accelerate the anaerobic digestion processes

Anaerobic digestion (AD) serves as a potential bioconversion process to treat various organic wastes/wastewaters, including sewage sludge, and generate renewable green energy. Despite its efficiency, AD has several limitations that need to be overcome to achieve maximum energy recovery from organic materials while regulating inhibitory substances. Hence, bioelectrochemical systems (BESs) have been widely investigated to treat inhibitory compounds including ammonia in AD processes and improve the AD operational efficiency, stability, and economic viability with various integrations. The BES operations as a pretreatment process, inside AD or after the AD process aids in the upgradation of biogas (CO₂ to methane) and residual volatile fatty acids (VFAs) to valuable chemicals and fuels (alcohols) and even directly to electricity generation. This review presents a comprehensive summary of BES technologies and operations for overcoming the limitations of AD in lab-scale applications and suggests upscaling and future opportunities for BES-AD systems.

Emerging bioelectrochemical technologies for biogas production and upgrading in cascading circular bioenergy systems

Biomethane is suggested as an advanced biofuel for the hard-to-abate sectors such as heavy transport. However, future systems that optimize the resource and production of biomethane have yet to be definitively defined. This paper assesses the opportunity of integrating anaerobic digestion (AD) with three emerging bioelectrochemical technologies in a circular cascading bioeconomy, including for power-to-gas AD (P2G-AD), microbial electrolysis cell AD (MEC-AD), and AD microbial electrosynthesis (AD-MES). The mass and energy flow of the three bioelectrochemical systems are compared with the conventional AD amine scrubber system depending on the availability of renewable electricity. An energy balance assessment indicates that P2G-AD, MEC-AD, and AD-MES circular cascading bioelectrochemical systems gain positive energy outputs by using electricity that would have been curtailed or constrained (equivalent to a primary energy factor of zero). This analysis of technological innovation, aids in the design of future cascading circular biosystems to produce sustainable advanced biofuels.

Empower C1: Combination of Electrochemistry and Biology to Convert C1 Compounds

The idea to somehow combine electrical current and biological systems is not new. It was subject of research as well as of science fiction literature for decades. Nowadays, in times of limited resources and the need to capture greenhouse gases like CO₂, this combination gains increasing interest, since it might allow to use C1 compounds and highly oxidized compounds as substrate for microbial production by "activating" them with additional electrons. In this chapter, different possibilities to combine electrochemistry and biology to convert C1 compounds into useful products will be discussed. The chapter first shows electrochemical conversion of C1 compounds, allowing the use of the product as substrate for a subsequent biosynthesis in uncoupled systems, further leads to coupled systems of biology and electrochemical conversion, and finally reaches the discipline of bioelectrosynthesis, where electrical current and C1 compounds are directly converted by microorganisms or enzymes. This overview will give an idea about the potentials and challenges of combining electrochemistry and biology to convert C1 molecules.

Phase Separation in Anaerobic Digestion: A Potential for Easier Process Combination?

The flexibilization of bioenergy production has the potential to counteract partly other fluctuating renewable energy sources (such as wind and solar power). As a weather-independent energy source, anaerobic digestion (AD) can offer on-demand energy supply through biogas production. Separation of the stages in anaerobic digestion represents a promising strategy for the flexibilization of the fermentative part of biogas production. Segregation in two reactor systems facilitates monitoring and control of the provision of educts to the second methanogenic stage, thus controlling biogas production. Two-stage operation has proven to reach similar or even higher methane yields and biogas purities than single-stage operation in many different fields of application. It furthermore allows methanation of green hydrogen and an easier combination of material and energy use of many biogenic raw and residual biomass sources. A lot of research has been conducted in recent years regarding the process phase separation in multi-stage AD operation, which includes more than two stages. Reliable monitoring tools, coupled with effluent recirculation, bioaugmentation and simulation have the potential to overcome the current drawbacks of a sophisticated and unstable operation. This review aims to summarize recent developments, new perspectives for coupling processes for energy and material use and a system integration of AD for power-to-gas applications. Thereby, cell physiological and engineering aspects as well as the basic economic feasibility are discussed. As conclusion, monitoring and control concepts as well as suitable separation technologies and finally the data basis for techno-economic and ecologic assessments have to be improved.

Operationalization of a microbial electrolysis cell: The interaction of the primary factors for energy storage efficiency

Microbial electrolysis cells have attracted attention as a method to enhance anaerobic digesters' performance. However, optimization of individual factors is not directly transferrable among systems as many are intimately linked and influenced by the system design, influent, and inoculum. To avoid this, here the effects and interactions between the relative electrode size, hydraulic retention time (HRT), and voltage imposed have been explored within a pair of otherwise identical reactors. Methane production has a positive correlation with the applied voltage, reaching 12.9 mL_CH4 L^-1h^-1 with 10 days HRT and 1000 mV, also achieving 35% energy storage efficiency, despite the higher electrical input. Shorter HRTs led to bacterial washouts, reducing the methane production below 10 mL_CH4 L^-1h^-1. Contour plots were constructed to relate the energy storage efficiency with operational conditions changes. These highlighted the benefits of using a relatively larger cathode than anode for improving energy storage efficiency.

Recent developments and key barriers to microbial CO2 electrobiorefinery

The electrochemical conversion of CO₂ can include renewable surplus electricity storage and CO₂ utilisation. This review focuses on the microbial CO₂ electrobiorefinery based on microbial electrosynthesis (MES) which merges electrochemical and microbial conversion to produce biofuels and higher-value chemicals. In this review, recent developments are discussed about bioelectrochemical conversion of CO₂ into biofuels and chemicals in MES via microbial CO₂-fixation and electricity utilisation reactions. In addition, this review examines technical approaches to overcome the current limitations of MES including the following: engineering of the biocathode, application of electron mediators, and reactor optimisation, among others. An in-depth discussion of strategies for the CO₂ electrobiorefinery is presented, including the integration of the biocathode with inorganic catalysts, screening of novel electroactive microorganisms, and metabolic engineering to improve target productivity from CO₂.

A slurry electrode integrated with membrane electrolysis for high-performance acetate production in microbial electrosynthesis

Microbial electrosynthesis (MES) technology employs electrotrophic microbes as biocatalysts to produce chemicals from CO₂. The application of a slurry electrode can enlarge the surface area to volume ratio, and membrane electrolysis (ME) for on-line extraction can solve the problem of product inhibition. This study constructed a novel dual-chamber ME-MES integrated system equipped with a slurry electrode, and the effect of concentration of powder-activated carbon (AC) in the catholyte on chemical production was also evaluated. The integrated system amended with 5 g L^-1 AC produced up to 13.4 g L^-1 acetate, showing a 179% increase compared with the control group without AC (4.8 g L^-1). However, further increasing the AC concentration to 10 and 20 g L^-1 resulted in decreased acetate production. A high concentration of AC showed higher antimicrobial activity to methanogens, as compared to acetogens. Amending AC exacerbated the process of electroosmosis. Also, amending AC with 0 to 10 g L^-1 decreased the electrochemical losses via both the membrane and electrolyte. The chemical production using H₂ or the electrode as electron donors showed a similar trend when amending AC. The present study provided important information for guiding future research to construct an efficient configuration of an MES bioreactor.

Enhanced Anaerobic Digestion by Stimulating DIET Reaction

Since the observation of direct interspecies electron transfer (DIET) in anaerobic mixed cultures in 2010s, the topic “DIET-stimulation” has been the main route to enhance the performance of anaerobic digestion (AD) under harsh conditions, such as high organic loading rate (OLR) and the toxicants’ presence. In this review article, we tried to answer three main questions: (i) What are the merits and strategies for DIET stimulation? (ii) What are the consequences of stimulation? (iii) What is the mechanism of action behind the impact of this stimulation? Therefore, we introduced DIET history and recent relevant findings with a focus on the theoretical advantages. Then, we reviewed the most recent articles by categorizing how DIET reaction was stimulated by adding conductive material (CM) and/or applying external voltage (EV). The emphasis was made on the enhanced performance (yield and/or production rate), CM type, applied EV, and mechanism of action for each stimulation strategy. In addition, we explained DIET-caused changes in microbial community structure. Finally, future perspectives and practical limitations/chances were explored in detail. We expect this review article will provide a better understanding for DIET pathway in AD and encourage further research development in a right direction.

Extracellular electron uptake in Methanosarcinales is independent of multiheme c-type cytochromes

The co-occurrence of Geobacter and Methanosarcinales is often used as a proxy for the manifestation of direct interspecies electron transfer (DIET) in the environment. Here we tested eleven new co-culture combinations between methanogens and electrogens. Previously, only the most electrogenic Geobacter paired by DIET with Methanosarcinales methanogens, namely G. metallireducens and G. hydrogenophilus. Here we provide additional support, and show that five additional Methanosarcinales paired with G. metallireducens, while a strict hydrogenotroph could not. We also show that G. hydrogenophilus, which is incapable to grow with a strict hydrogenotrophic methanogen, could pair with a strict non-hydrogenotrophic Methanosarcinales. Likewise, an electrogen outside the Geobacter cluster (Rhodoferrax ferrireducens) paired with Methanosarcinales but not with strict hydrogenotrophic methanogens. The ability to interact with electrogens appears to be conserved among Methanosarcinales, the only methanogens with c-type cytochromes, including multihemes (MHC). Nonetheless, MHC, which are often linked to extracellular electron transfer, were neither unique nor universal to Methanosarcinales and only two of seven Methanosarcinales tested had MHC. Of these two, one strain had an MHC-deletion knockout available, which we hereby show is still capable to retrieve extracellular electrons from G. metallireducens or an electrode suggesting an MHC-independent strategy for extracellular electron uptake.

Flexible control of biohythane composition and production by dual cathodes in a bioelectrochemical system

Flexible control of CH₄/H₂ ratio in biohythane is important to its applications but remains a challenge. Herein, a dual-cathode bioelectrochemical system (BES) was developed for achieving biohythane production with controllable composition through adjusting external resistance. The BES was started as a microbial electrolysis cell to produce hydrogen in both cathodes ("H₂-cathode") and then evolved to produce methane production in one cathode with inoculation of anaerobic sludge ("CH₄-cathode"). When increasing the external resistance of the H₂-cathode from 10 to 330 Ω, its H₂ production decreased from 173 ± 11 to 8 ± 2 L m^-3 d^-1. This redistribution of electrons has benefited the CH₄-cathode that had an increased CH₄ production from 25 ± 3 to 90 ± 5 L m^-3 d^-1. The CH₄/H₂ ratio increased from 0.14 to 11, making biohythane more applicable to natural gas engines. Those results will help to formulate a BES-based approach to accomplish controllable biohythane production.

Genome Analyses and Genome-Centered Metatranscriptomics of Methanothermobacter wolfeii Strain SIV6, Isolated from a Thermophilic Production-Scale Biogas Fermenter

In the thermophilic biogas-producing microbial community, the genus Methanothermobacter was previously described to be frequently abundant. The aim of this study was to establish and analyze the genome sequence of the archaeal strain Methanothermobacter wolfeii SIV6 originating from a thermophilic industrial-scale biogas fermenter and compare it to related reference genomes. The circular chromosome has a size of 1,686,891 bases, featuring a GC content of 48.89%. Comparative analyses considering three completely sequenced Methanothermobacter strains revealed a core genome of 1494 coding sequences and 16 strain specific genes for M. wolfeii SIV6, which include glycosyltransferases and CRISPR/cas associated genes. Moreover, M. wolfeii SIV6 harbors all genes for the hydrogenotrophic methanogenesis pathway and genome-centered metatranscriptomics indicates the high metabolic activity of this strain, with 25.18% of all transcripts per million (TPM) belong to the hydrogenotrophic methanogenesis pathway and 18.02% of these TPM exclusively belonging to the mcr operon. This operon encodes the different subunits of the enzyme methyl-coenzyme M reductase (EC: 2.8.4.1), which catalyzes the final and rate-limiting step during methanogenesis. Finally, fragment recruitment of metagenomic reads from the thermophilic biogas fermenter on the SIV6 genome showed that the strain is abundant (1.2%) within the indigenous microbial community. Detailed analysis of the archaeal isolate M. wolfeii SIV6 indicates its role and function within the microbial community of the thermophilic biogas fermenter, towards a better understanding of the biogas production process and a microbial-based management of this complex process.

Insights in the anode chamber influences on cathodic bioelectromethanogenesis - systematic comparison of anode materials and anolytes

Cathode and catholyte are usually optimized to improve microbial electrosynthesis process, whereas the anodic counter reaction was not systematically investigated and optimized for these applications yet. Nevertheless, the anolyte and especially the anode material can limit the cathodic bioelectrochemical process. This paper compares for the first time the performance of different anode materials as counter electrodes for a cathodic bioelectrochemical process, the bioelectromethanogenesis. It was observed that depending on the anode material the cathodic methane production varies from 0.96 µmol/d with a carbon fabric anode to 25.44 µmol/d with a carbon felt anode of the same geometrical surface area. The used anolyte also affected the methane production rate at the cathode. Especially, the pH of the anolyte showed an impact on the system; an anolyte with pH 5 produced up to 2.0 times more methane compared to one with pH 8.5. The proton availability is discussed as one reason for this effect. Although some of the measured effects cannot be explained completely so far this study advises researchers to strongly consider the anode impact during process development and optimization of a cathodic bioelectrochemical synthesis process.