Dissolved organic matter (DOM) removal from biotreated coking wastewater by chitosan-modified biochar: Adsorption fractions and mechanisms

Novel chitosan-based barrier materials for environmental containment: Synthesis, characterization, and contaminant removal capacities and mechanisms

This study critically appraises employing chitosan as a composite with bentonite, biochar, or both materials as an alternative to conventional barrier materials. A comprehensive literature review was conducted to identify the studies reporting chitosan-bentonite composite (CBC), chitosan amended biochar (CAB), and chitosan-bentonite-biochar composite (CBBC) for effective removal of various contaminants. The study aims to review the synthesis of these composites, identify fundamental properties affecting their adsorption capacities, and examine how these properties affect or enhance the removal abilities of other materials within the composite. Notably, CBC composites have the advantage of adsorbing both cationic and anionic species, such as heavy metals and dyes, due to the cationic nature of chitosan and the anionic nature of montmorillonite, along with the increased accessible surface area due to the clay. CAB composites have the unique advantage of being low-cost sorbents with high specific surface area, affinity for a wide range of contaminants owing to the high surface area and microporosity of biochar, and abundant available functional groups from the chitosan. Limited studies have reported the utilization of CBBC composites to remove various contaminants. These composites can be prepared by combining the steps employed in preparing CBC and CAB composites. They can benefit from the favorable adsorption properties of all three materials while also satisfying the mechanical requirements of a barrier material. This study serves as a knowledge base for future research to develop novel composite barrier materials by incorporating chitosan and biochar as amendments to bentonite.

Co-influence of biochar-supported effective microorganisms and seasonal changes on dissolved organic matter and microbial activity in eutrophic lake

DOM (dissolved organic matter) play a crucial role in lakes' geochemical and carbon cycles. Eutrophication evolution would influence nutrient status of waters and investigating the DOM variation helps a better understanding of bioremediation on environmental behavior of DOM in eutrophic lakes. In our study, the contents, compositions and characteristics of systematic DOM&SOM (sediment organic matter) were greatly influenced by seasonal changes. But the effective bioremediations obviously reduced the DOM concentration and thus mitigated the eutrophication outbreak risks in water bodies due to the increased MBC (microbial biomass carbon), microbial activity and metabolism. In early summer, the overall DOM in each treatment were readily low levels and derived from both autochthonous and exogenous origins, dominated by fulvic acid-like. In midsummer, the DOM contents and characteristics in each treatment increased significantly as phytoplankton activity improved, and the majority of DOM were humic acid-like and mainly of biological origin. The greatest differences of enzymes, MBC, microbial metabolism and DOM&SOM removal among different treatments were observed in summer months. In autumn, the systematic DOM&SOM slightly reduced due to the deceased microbial activity, in which the microbial humic acids were main component and derived from endogenous sources. Additionally, the gradually decreased SOM with cultivated time in each treatment was a result of microbiological conversion of SOM into DOM. For various treatments, BE, BE.A, BE.C and BE.E increased the MBC, enzymatic and microbial activities due to the application of biochar-supported EMs. Among these, BE and BE.A, especially BE.A with oxygen supplement, achieved the most desirable effect on reducing systematic DOM&SOM levels and increasing enzymatic and microbial activities. The group of EM also reduced the levels of DOM&SOM as improved degradation of EMs for DOM. However, BC, BE.C and BE.E finally did not achieved the desirable effect on reducing DOM&SOM due to the suppression of microbial activities, respectively, from high dose of biochar, weakening of dominant species and additional introduction of EMs in low liveness.

Carbon-based adsorbents for the mitigation of polycyclic aromatic hydrocarbon: a review of recent research

Accumulation of polycyclic aromatic hydrocarbons (PAH) poses significant dangers to the environment and human health. The advancement of technology for cleaning up PAH-contaminated environments is receiving more attention. Adsorption is the preferred and most favorable approach for cleaning up sediments polluted with PAH. Due to their affordability and environmental friendliness, carbonaceous adsorbents (CAs) have been regarded as promising for adsorbing PAH. However, adsorbent qualities, environmental features, and factors may all significantly impact how well CAs remove PAH. According to growing data, CAs, most of which come from laboratory tests, may be utilized to decontaminate PAH in aquatic setups. However, their full potential has not yet been established, especially concerning field applications. This review aims to concisely summarize recent developments in CA, PAH stabilization processes, and essential field application-controlling variables. This review analysis emphasizes activated carbon, biochar, Graphene, carbon nanotubes, and carbon-nanomaterials composite since these CAs are most often utilized as adsorbents for PAH in aquatic systems.

A comprehensive review on the preparation of biochar from digestate sources and its application in environmental pollution remediation

The preparation of biochar from digestate is one of the effective ways to achieve the safe disposal and resource utilization of digestate. Nevertheless, up to now, a comprehensive review encompassing the factors influencing anaerobic digestate-derived biochar production and its applications is scarce in the literature. Therefore, to fill this gap, the present work first outlined the research hotspots of digestate in the last decade using bibliometric statistical analysis with the help of VOSviewer. Then, the characteristics of the different sources of digestate were summarized. Furthermore, the influencing factors of biochar preparation from digestate and the modification methods of digestate-derived biochar and associated mechanisms were analyzed. Notably, a comprehensive synthesis of anaerobic digestate-derived biochar applications is provided, encompassing enhanced anaerobic digestion, heavy metal remediation, aerobic composting, antibiotic/antibiotic resistance gene removal, and phosphorus recovery from digestate liquor. The economic and environmental impacts of digestate-derived biochar were also analyzed. Finally, the development prospect and challenges of using biochar from digestate to combat environmental pollution are foreseen. The aim is to not only address digestate management challenges at the source but also offer a novel path for the resourceful utilization of digestate.

Enhanced landfill leachate treatment performance by adsorption-assisted membrane distillation

Membrane fouling and high-strength membrane concentrate production are two limitations of membrane distillation (MD) for landfill leachate treatment. In this study, activated carbon- and biochar-based adsorption processes were integrated into a conventional MD system to overcome these limitations. The organic matter fractionations of the leachate were thoroughly investigated during the treatment. Membrane-reversible and irreversible foulants differed remarkably from the inlet leachate in the non-assisted MD system. Specifically, reversible foulants were characterized by a high abundance of humic-like fluorescent components, high-molecular-weight humic-size constituents, peptides, and unsaturated compounds. In contrast, irreversible foulants were enriched with fulvic-like fluorescent components, low-molecular-weight neutrals, unsaturated compounds, and polyphenols. The adsorption-based pre-treatment effectively removed foulant precursors from landfill leachate, with a relatively higher (20%) adsorption performance for specific biochar used in this study than for activated carbon. Compared with the non-assisted MD system, the biochar-assisted MD system showed improved performance, achieving 40% overall membrane flux recovery, 42% higher filtration fluxes, and 53% lower concentrate production. In addition, a 15% higher removal of irreversible foulants was observed as compared to the reversible foulants, which can potentially increase the membrane lifespan. This study demonstrates the effectiveness of an adsorption-assisted MD system supported by increased filtration, membrane fouling alleviation, and low-strength leachate concentrate generation.

Multi-factorial investigation of the effect of biochar of the secondary medicinal residue of snow lotus on the adsorption of two azo dyes, methyl red and methyl orange

Azo dye residues pollute water, which are difficult to decompose, and posing a major threat to the ecological environment. The residues of Chinese medicine still have many possibilities for use after its medicinal value has been brought into play. In this study, secondary residue biochar activation (Na2 CO3 -modified, SBA) and secondary residue biochar (unmodified, SBC) were prepared from the secondary residue of snow lotus at 200-600°C. Surface features were obtained by Brunauer-Emmett-Teller N2 method and combined with scanning electron microscopy, and their structures were analyzed by x-ray diffraction spectroscopy, Fourier infrared and near-infrared spectroscopy. The effects of five factors, including initial concentration, contact time and adsorption temperature and so forth, on the adsorption of methyl red (MR) and methyl orange (MO) solutions were investigated. Results showed that the biochar yield, specific surface area, and pore size increased after modification. modification promoted the formation of the internal structure aromatization and oxygen-containing functional groups. Adsorption experiments showed that the surroundings pH = 8, the dyes adsorption concentration of 8 mg/L, adsorption temperature of 20-40°C and time of about 1 h were more stable. Under the condition, the removal of MO by SBA could reach approximately 60%-80% (480-640 mg/g), while the removal of MR could reach more than 90% (>720 mg/g).The charcoal prepared and modified under high temperature conditions was more effective for MO adsorption, while MR relied on low temperature effectively. This study provides a new choice of adsorbent for MR and MO and finds a new direction for the utilization of snow lotus residues.

Water Adsorption and Its Pore Structure Dependence in Shale Gas Reservoirs

Investigating the occurrence characteristics of water molecules in shale is of great resource, economic, and environmental significance. In this work, the adsorption behavior of water vapor on Longmaxi shale samples is tested, and several isothermal adsorption models are employed to fit the experimental data and primary and secondary adsorption processes. Furthermore, the influence of organic matter content, mineralogical composition, and pore structure on the adsorption process is discussed, and their special combination relationship is revealed correspondingly. The results indicate that the Dent model is suitable for the experimental data with excellent goodness of fit, and the Langmuir and Freundlich models are suitable for the primary and secondary adsorption processes, respectively. The adsorption of water vapor is controlled by the pore volume and specific surface area (SSA) of shale. Mesopore structure parameters mostly determine the water adsorption amount. Massive micropores developed in organic matter with a huge SSA contribute strongly to the primary adsorption process. In general, the combination of organic matter and clay minerals controls the pore structure of shale, which further controls the primary and secondary adsorption processes of water vapor. These findings contribute to a better understanding of water adsorption in different adsorption carriers and in microscopic pores of different sizes occurring in shale gas reservoirs.

Confined water-encapsulated activated carbon for capturing short-chain perfluoroalkyl and polyfluoroalkyl substances from drinking water

The global ecological crisis of perfluoroalkyl and polyfluoroalkyl substances (PFASs) in drinking water has gradually shifted from long-chain to short-chain PFASs; however, the widespread established PFAS adsorption technology cannot cope with the impact of such hydrophilic pollutants given the inherent defects of solid-liquid mass transfer. Herein, we describe a reagent-free and low-cost strategy to reduce the energy state of short-chain PFASs in hydrophobic nanopores by employing an in situ constructed confined water structure in activated carbon (AC). Through direct (driving force) and indirect (assisted slip) effects, the confined water introduced a dual-drive mode in the confined water-encapsulated activated carbon (CW-AC) and completely eliminated the mass transfer barrier (3.27 to 5.66 kcal/mol), which caused the CW-AC to exhibit the highest adsorption capacity for various short-chain PFASs (C-F number: 3-6) among parent AC and other adsorbents reported. Meanwhile, benefiting from the chain length- and functional group-dependent confined water-binding pattern, the affinity of the CW-AC surpassed the traditional hydrophobicity dominance and shifted toward hydrophilic short-chain PFASs that easily escaped treatment. Importantly, the ability of CW-AC functionality to directly transfer to existing adsorption devices was verified, which could treat 21,000 bed volumes of environment-related high-load (~350 ng/L short-chain PFAS each) real drinking water to below the World Health Organization's standard. Overall, our results provide a green and cost-effective in situ upgrade scheme for existing adsorption devices to address the short-chain PFAS crisis.

Biochar-coupled organic fertilizer reduced soil water-dispersible colloidal phosphorus contents in agricultural fields

Soil water-dispersible colloidal phosphorus (WCP) presents high mobility, however, the regulatory effect of biochar-coupled organic fertilizer is rarely known, especially under different cropping patterns. This study investigated the P adsorption, soil aggregate stability, and WCP in three paddy and three vegetable fields. These soils were amended with different fertilizers (chemical fertilizer, CF; substitution of solid-sheep manure or liquid-biogas slurry organic fertilizer, SOF/LOF; substitution of biochar-coupled organic fertilizers, BSOF/BLOF). Results presented that the LOF averagely increased the WCP contents by 50.2% across the sites, but the SOF and BSOF/BLOF averagely decreased their contents by 38.5% and 50.7% in comparison with the CF. The WCP decline in the BSOF/BLOF-amended soils was mainly attributed to the intensive P adsorption capacity and soil aggregate stability. The BSOF/BLOF increased the amorphous Fe and Al contents in the fields in comparison with the CF, which improved the adsorption capacity of soil particles, further improving the maximum absorbed P (Q_max) and reducing the dissolved organic matter (DOC), leading to the improvement of > 2 mm water-stable aggregate (WSA_>2mm) and subsequent WCP decrease. This was proved by the remarkable negative associations between the WCP and Q_max (R² = 0.78, p < 0.01) and WSA_>2mm (R² = 0.74, p < 0.01). This study manifests that biochar-coupled organic fertilizer could effectively reduce soil WCP content via the improvement of P adsorption and aggregate stability.

Identifying the critical activated carbon properties affecting the adsorption of effluent organic matter from bio-treated coking wastewater

Activated carbon is widely used to remove effluent organic matter (EfOM) from bio-treated coking wastewater. However, the critical carbon properties affecting adsorption performance are still unclear. Nine commercial powdered activated carbons (PACs) with different pore structures, surface functional groups, and surface charges were used to adsorb EfOM from bio-treated coking wastewater, which was fractionated according to their molecular weight (MW) and hydrophobicity. Good correlations were observed between the adsorption of biopolymers (MW > 20,000 Da, 7 %) and macropore volume (>50 nm), as well as between the adsorption of humics (MW = 1000 ~ Da, 36 %) and mesopore volume (2-50 nm), suggesting that the adsorption sites of EfOM depended on their molecular size. Higher isoelectric points and fewer acidic groups promoted the adsorption of the most negatively charged hydrophobic acids (HPOA, 39.5 %). According to variation partitioning analysis (VPA), mesopore-macropore greatly contributed to the adsorption capacities of EfOM (71.3 %), whereas the sum of phenolic hydroxyl and carboxyl (26.3 %) and isoelectric point (12.2 %) affected the normalized adsorption capacities of EfOM. In conclusion, PAC with a higher mesopore volume, fewer acidic groups, and a higher isoelectric point was desirable for removing EfOM from bio-treated coking wastewater. This study provides guidance for the selection of PAC for the removal of EfOM from bio-treated coking wastewater.

Insights into the conversion of dissolved organic phosphorus favors algal bloom, arsenate biotransformation and microcystins release of Microcystis aeruginosa

Little information is available on influences of the conversion of dissolved organic phosphorus (DOP) to inorganic phosphorus (IP) on algal growth and subsequent behaviors of arsenate (As(V)) in Microcystis aeruginosa (M. aeruginosa). In this study, the influences factors on the conversion of three typical DOP types including adenosine-5-triphosphate disodium salt (ATP), β-glycerophosphate sodium (βP) and D-glucose-6-phosphate disodium salt (GP) were investigated under different extracellular polymeric secretions (EPS) ratios from M. aeruginosa, and As(V) levels. Thus, algal growth, As(V) biotransformation and microcystins (MCs) release of M. aeruginosa were explored in the different converted DOP conditions compared with IP. Results showed that the three DOP to IP without EPS addition became in favor of algal growth during their conversion. Compared with IP, M. aeruginosa growth was thus facilitated in the three converted DOP conditions, subsequently resulting in potential algal bloom particularly at arsenic (As) contaminated water environment. Additionally, DOP after conversion could inhibit As accumulation in M. aeruginosa, thus intracellular As accumulation was lower in the converted DOP conditions than that in IP condition. As(V) biotransformation and MCs release in M. aeruginosa was impacted by different converted DOP with their different types. Specifically, DMA concentrations in media and As(III) ratios in algal cells were promoted in converted βP condition, indicating that the observed dissolved organic compositions from βP conversion could enhance As(V) reduction in M. aeruginosa and then accelerate DMA release. The obtained findings can provide better understanding of cyanobacteria blooms and As biotransformation in different DOP as the main phosphorus source.

In situ formed CaSO4 on waste dander biochar to inhibit the mineralization of soil organic carbon

In order to reduce CO2 emissions, as well as realize the resource utilization of waste dander (WD) and the goal of international "peak carbon dioxide emissions" and "carbon neutrality", Biochar was prepared with WD via pyrolysis technology, achieving CaSO4 in situ generated on its surface, which could be used to inhibit soil organic carbon (SOC) from mineralizing and enhance soil carbon sequestration ability. The characterization results showed that the unstable carbon (C) structures as well as more conjugated structures were generated on Ca-BC, obtaining an increased C sequestration of Ca-BC to 21.70 %. With the application of Ca-BC, the mineralization rate of SOC was reduced to 0.451 mg CO2/(g·d), and the soil moisture content, pH and TOC content were increased to 45.48 %, 7.96 and 47.19 %. In addition, the bioinformatics analysis and redundancy analysis revealed that the application of Ca-BC promoted bacteria to convert into the stable C-dominant phyla (Firmicutes).

Adsorption of fulvic acid on mesopore-rich activated carbon with high surface area

The loss of dissolved organic matter (DOM), especially fulvic acid (FA), from soil by rainfall and runoff will reduce soil fertility and result in water pollution of DOM. Carbon materials including biochars (BCs) and activated carbons (ACs) are widely suggested for soil remediation and carbon immobilization. However, these suggested carbon materials are dominated by micropores, and largely limiting the adsorption capacity for FA. Therefore, a mesopore-rich activated carbon (KAC) with high surface area was prepared from bamboo chips to investigate the adsorption of FA. This KAC can adsorb FA more than ACs and BCs investigated in this study and reported in previous studies not only because of the high surface area (3108 m²/g), but also the higher mesopore volume proportion (57%). The negative pH effect on adsorption performance of KAC was weaker than that on AC and BC, because of the less polarity of KAC. Moreover, KAC was favorable to adsorb FA fractions with various molecular weights, higher aromaticity and higher polarity. This study indicated that KAC was a promising adsorbent for FA, and revealed the underlying adsorption mechanism of FA on KAC, which are helpful for the carbon immobilization and pollution control in soil.

Chitosan-Modified Biochars to Advance Research on Heavy Metal Ion Removal: Roles, Mechanism and Perspectives

The chitosan-modified biochars BC-CS 1-1, BC-CS 2-1 and BC-CS 4-1 were subjected to the synthetic application of biochar from agriculture waste and chitosan for the adsorption of Cu(II), Cd(II), Zn(II), Co(II) and Pb(II) ions from aqueous media. The results displayed a heterogeneous, well-developed surface. Additionally, the surface functional groups carboxyl, hydroxyl and phenol, determining the sorption mechanism and confirming the thermal stability of the materials, were present. The sorption evaluation was carried out as a function of the sorbent dose, pH, phase contact time, initial concentration of the solution and temperature. The maximum value of q_t for Pb(II)-BC-CS 4-1, 32.23 mg/g (C₀ 200 mg/L, mass 0.1 g, pH 5, 360 min), was identified. Nitric acid was applied for the sorbent regeneration with a yield of 99.13% for Pb(II)-BC-CS 2-1. The produced sorbents can be used for the decontamination of water by means of the cost-effective and high-performance method.

Antibiotic bioremediation by new generation biochar: Recent updates

The evolving multidrug resistance in microbes with increasing antibiotic pollution is becoming a severe global crisis. Recent developments on antibiotic remediations by biochar are promising. Advancements in biochar engineering enhanced biochar remediation efficiency to another level through developing new interactions and bonding abilities with antibiotic pollutants. Especially chemical/metal-composite modification significantly increased catalysis of biochar. The review's main focus is to underline biochar efficiency for the abatement of emerging antibiotic pollutants. Moreover, to relate feedstock, production conditions, and engineering techniques with biochar properties. Also, modification strategies are reviewed to obtain biochar or their composites before examining improved remediation potential ranging from 20 to 552 mg g^-1 for various antibiotics. Biochar offers different interactions depending on the surface functionalities e.g., π-π stacking, electrostatic, H-bonding, etc. Biochar and related composites have also been reviewed for remarkable properties e.g., photocatalysis, adsorption, and oxidation processes. Furthermore, future research directions and opportunities for biochar research are discussed.

Sorption of Pb(II) onto biochar is enhanced through co-sorption of dissolved organic matter

Biochar plays an important role in controlling migration of pollutants in soils. However, little information is available on the interactions between soil-derived dissolved organic matter (DOM), biochar and soluble metal species. The aim of this work was to present the adsorption process of soil DOM by biochar (corn straw biochar produced at 700 °C) and to determine whether co-sorption of DOM would change the affinity for Pb(II). The adsorption rates of biochar and biochar + DOM for Pb(II) were best fitted with a pseudo-second order kinetic model, and the equilibrium adsorption isotherm data agreed well with both the Langmuir and Freundlich models. Adsorption of DOM to biochar reached equilibrium after 15 h with an uptake of 52% of the supplied DOM. We used fluorescence excitation-emission matrices (EEMs) with parallel factor (PARAFAC) analysis to demonstrate that protein-like, fulvic acid-like and humic acid-like substances were the primary constituents of the DOM, which were quenched over time in the presence of biochar. Synchronous fluorescence spectra indicated that the protein-like structures were the predominant fluorescence substances in DOM. Two-dimensional correlation spectroscopy (2D-COS) showed the binding of DOM to biochar resulted in the quenching of fluorescence in the order: protein-like substances > humic-like substances (280 > 355 nm). Data supports the notion that DOM can increase the adsorption capacity of biochar for metal-ions.

Insight into the effects of biological treatment on the binding properties of copper onto dissolved organic matter derived from coking wastewater

Biological treatment can remove more than 89.8% of total organic carbon (TOC) and 94.4% of fluorescent dissolved organic matter (DOM) in the coking wastewater, thereby affecting the migration, transformation and bioavailability and binding characteristics of heavy metals (HMs). The results of parallel factor analysis (PARAFAC) show that protein-like materials accounted for 97.53% in the coking wastewater DOM, a large number of humic-like substances are produced and accounted for more than 55.40% after biological treatment. A new spectral data processing method, the 1/n-th power transformation after two-dimensional correlated spectroscopy (2D-COS) in combination with synchronous fluorescence spectra (SFS), can identify small features obscured by strong peaks, and reveal more binding sites as well as preserve the sequential order information. The result indicates that the preferential bonding of Cu(II) is at 306 nm (protein-like) for coking wastewater DOM, and at 514 nm (humic-like) for effluent DOM. The C-O group of esters and alcohols can preferentially complexate with Cu(II) in the coking wastewater and effluent DOM. The log K_M values of PARAFAC components with Cu(II) are in the range of 3.59-5.06 for coking wastewater DOM, and in the range of 4.80-5.64 for the effluent DOM. Log K_M values for protein-like materials with Cu(II) are higher than these for fulvic- and humic-like substances. Humic-like substances can form more stable complexes with Cu(II) in the effluent DOM. Biological treatment increases the chemical stability of DOM-Cu(II) complexes, thereby further reducing the environmental risk of Cu(II).

Efficient remediation of antibiotic pollutants from the environment by innovative biochar: current updates and prospects

The increased antibiotic consumption and their improper management led to serious antibiotic pollution and its exposure to the environment develops multidrug resistance in microbes against antibiotics. The entry rate of antibiotics to the environment is much higher than its exclusion; therefore, efficient removal is a high priority to reduce the harmful impact of antibiotics on human health and the environment. Recent developments in cost-effective and efficient biochar preparation are noticeable for their effective removal. Moreover, biochar engineering advancements enhanced biochar remediation performance several folds more than in its pristine forms. Biochar engineering provides several new interactions and bonding abilities with antibiotic pollutants to increase remediation efficiency. Especially heteroatoms-doping significantly increased catalysis of biochar. The main focus of this review is to underline the crucial role of biochar in the abatement of emerging antibiotic pollutants. A detailed analysis of both native and engineered biochar is provided in this article for antibiotic remediation. There has also been discussion of how biochar properties relate to feedstock, production conditions and manufacturing technologies, and engineering techniques. It is possible to produce biochar with different surface functionalities by varying the feedstock or by modifying the pristine biochar with different chemicals and preparing composites. Subsequently, the interaction of biochar with antibiotic pollutants was compared and reviewed. Depending on the surface functionalities of biochar, they offer different types of interactions e.g., π-π stacking, electrostatic, and H-bonding to adsorb on the biochar surface. This review demonstrates how biochar and related composites have optimized for maximum removal performance by regulating key parameters. Furthermore, future research directions and opportunities for biochar research are discussed.

Advances on tailored biochar for bioremediation of antibiotics, pesticides and polycyclic aromatic hydrocarbon pollutants from aqueous and solid phases

Biochar is gaining incredible importance for remediation applications due to their attractive removal properties. Moreover, it is becoming ecofriendly, cost-effective and sustainable bioadsorbents towards replacing expensive activated carbons. Studies reveal biochar effectiveness for removal of important and potentially severe organic pollutants such as antibiotics and pesticides. Recent research advancements on biochar modification (physical, chemical and biological) opens greater opportunity to form tailored biochar with improved surface properties than their native forms for offering better removal efficiencies. Further attentions paid towards emergent new modification methods to cover broad-spectrum pollutants using tailored biochar. Current review aims to summarize recent updates upon biochar tailoring, comparative account of tailored biochars removal efficiencies with respect to their native forms and to provide in-depth discussion covering specific interactions of tailored biochars with antibiotics, polycyclic aromatic hydrocarbons (PAHs) and pesticides for their effective removals and degradation from polluted environments. Application of inducer compounds e.g., peroxymonosulfate and sodium percarbonate further improved the biochar role towards degradation of toxic organic pollutants into their less or nontoxic forms. Biochar engineered with specific metals enable them for the same role without inducer compounds. Moreover, microbial interactions with biochar not only improve the bioremediation level further but also degrade the pollutants from the environment and open up better environmental and socio-economic prospects. Application of green, cost-effective and sustainable biochar for remediation of environmentally potential organic pollutants offers economical treatment methods as well as safe environment. These benefits are inline with global trends towards developing a sustainable process for biocircular economy.

Chitosan-modified biochar: Preparation, modifications, mechanisms and applications

The chitosan-modified biochar composite, as a carbohydrate polymer, has received increasing attention and becomes a research hotspot. It is a promising impurity adsorption material, which has potential application value in the agricultural environment fields such as soil improvement and sewage purification. The composite can combine the advantages of biochar with chitosan, and the resulting composite usually exhibits a great improvement in its surface functional groups, adsorption sites, stability, and adsorption properties. In addition, compared to other adsorbents, the composite truly achieves the concept of "waste control by waste". In this paper, the preparation method, composite classification, adsorption mechanism, and models of biochar modified by chitosan are introduced, meanwhile, we also review and summarize their effects on the decontamination of wastewater and soil. In addition to common heavy metal ions, we also review the adsorption and removal of some other organic/inorganic pollutants, including (1) drug residues; (2) dyes; (3) phosphates; (4) radionuclides; (5) perfluorochemicals, etc. Moreover, challenges and prospects for the composite are presented and further studies are called for the chitosan-biochar composite. We believe that the composite will lead to further achievements in the field of environmental remediation.

A Comprehensive Insight on Adsorption of Polyaromatic Hydrocarbons, Chemical Oxygen Demand, Pharmaceuticals, and Chemical Dyes in Wastewaters Using Biowaste Carbonaceous Adsorbents

Recent trends in adsorption of hazardous organic pollutants including Polyaromatic Hydrocarbons (PAHs), Chemical Oxygen Demand (COD), Pharmaceuticals, and Chemical Dyes in wastewater using carbonaceous materials such as activated carbon (AC) and biochar (BC) have been discussed in this paper. Utilization of biomass waste in the preparation of AC and BC has gained a lot of attention recently. This review outlines the techniques used for preparation, modification, characterization, and application of the above-mentioned materials in batch studies. The approaches towards understanding the adsorption mechanisms have also been discussed. It is observed that in the majority of the studies, high removal efficiencies were reported using biowaste adsorbents. Regarding the full potential of adsorption, varying values were obtained that are strongly influenced by the adsorbent preparation technique and adsorption method. In addition, most of the studies were concentrated on the kinetic, isotherm equilibrium, and thermodynamic aspects of adsorption, suggesting the dominant isotherm and kinetic models as Langmuir or Freundlich and pseudo-second-order models. Due to development in biosorbents, adsorption has been found to be increasingly economical. However, application of these adsorbents at commercial scale has not been adequately investigated and needs to be studied. Most of the studies have been conducted on synthetic solutions that do not completely represent the discharged effluents. This also needs attention in future studies.

Research progress and prospects for using biochar to mitigate greenhouse gas emissions during composting: A review

Biochar possesses a unique porous structure and abundant surface functional groups, which can potentially help mitigate greenhouse gas (GHG) emissions from compost. This review summarizes the properties and functions of biochar, and the effects of biochar on common GHGs (methane (CH₄), carbon dioxide (CO₂), and nitrous oxide (N₂O)) and ammonia (NH₃, an indirect GHG) during composting. Studies have shown that it is possible to improve the mitigation of GHG emissions during composting by adjusting the biochar amount, type of raw material, pyrolysis temperature, and particle size. Biochar produced from crop residues and woody biomass has a greater effect on mitigating CH₄, N₂O, and NH₃ emissions during composting, and GHG emissions can be reduced significantly by adding about 10% (w/w) biochar. Biochar produced by high temperature pyrolysis (500-900 °C) has a greater effect on mitigating CH₄ and N₂O emissions, whereas biochar generated by low temperature pyrolysis (200-500 °C) is more effective at reducing NH₃ emissions. Interestingly, adding granular biochar is more beneficial for mitigating CH₄ emissions, whereas adding powdered biochar is better at reducing NH₃ emissions. According to the current research status, developing new methods for producing and using biochar (e.g., modified or combined with other additives) should be the focus of future research into mitigating GHG emissions during composting. The findings summarized in this review may provide a reference to allow the establishment of standards for using biochar to mitigate GHG emissions from compost.

Biochar protects hydrophilic dissolved organic matter against mineralization and enhances its microbial carbon use efficiency

A combination of biochar with exogenous organic material in soils is often used in practical farmland management. The objective of this study was to determine how biochar affects organic matter decomposition by studying the decomposition of ¹³C-labelled hydrophilic (Hi-) and hydrophobic (Ho-) dissolved organic matter (DOM) in acid and neutral soils during a 60-day incubation experiment. The proportions of carbon (C) mineralization in Hi-DOM with or without biochar addition were 32.6% or 34.5% in acid soil (P > 0.05) and 15.4% or 22.3% in neutral soil (P < 0.05), respectively. In contrast, those proportions of Ho-DOM-C mineralization with or without biochar addition were 20.0% or 21.4% in acid soil and 19.0% or 20.5% in neutral soil (P > 0.05), respectively. These results showed that biochar could protect Hi-DOM against mineralization in neutral soil but exhibited less effect on Ho-DOM mineralization in both acid and neutral soils. Additionally, biochar did not affect microbial incorporation of Hi- or Ho-DOM in acid and neutral soils. However, biochar notably improved the microbial carbon use efficiency (CUE) of Hi-DOM while it significantly reduced the CUE of Ho-DOM in neutral soil (P < 0.05), indicating that the effect of biochar on microbial CUE was related to organic matter type and soil pH. This study suggests that Hi-DOM can outperform Ho-DOM to decrease C loss and improve microbial CUE in neutral soil with biochar addition. This phenomenon could be due mainly to the different chemical compositions of Hi-DOM and Ho-DOM and their distinct microbial preference. These findings can provide references for biochar's ability to regulate the decomposition of organic matter.

The effects of biochar/compost for adsorption behaviors of sulfamethoxazole in amended wetland soil

Biochar and compost were two common amendments for the polluted soil. However, few studies were conducted to study the sorption of organic pollutants on combined biochar-compost and the relative adsorption mechanisms in mixed soil. The work had studied the adsorption and desorption behaviors of sulfamethoxazole (SMX) onto wetland soil after amended with biochar and/or compost. Moreover, the physicochemical and morphology properties of biochar/compost and amended soils were analyzed to discuss the relative adsorption mechanisms. Studies showed that the adsorption capacity of amended soils increased with the total amount of biochar or/and compost added, which was positively related to SOM, CEC, and EC of amended soils, but had nothing to do with the type of additives. Compared with the compost-treated treatments, the biochar-treated treatments generally achieved lower desorption rates, which also had demonstrated both different adsorption mechanisms. Pore filling and hydrophobic partitioning were the main adsorption mechanisms for biochar and compost, respectively. Though biochar owned developed pore structure, however, pore-filling of biochar was overwhelmingly weakened due to pore-blocking in mixed soils. Hence, in soil environment, compost is a kind of a more desirable amendment than biochar in absorbing and degrading organic pollutants.

Sewage sludge and solid residues from biogas production derived biochar as an effective bio-waste adsorbent of fulvic acids from water or wastewater

Due to environmental concern, direct utilization of sewage sludge or residues from biogas production is restricted. Conversion of problematic bio-wastes into biochars can be a very effective solution. In the presented study, the adsorption of fulvic acids onto series of biochars produced from bio-wastes such as sewage sludge, residues from biogas production, and plant (Miscanthus sp.) were performed to examine the behavior of biochars in the environment and interactions with fulvic acids as the representatives of dissolved organic matter. The results clearly indicate that the highest excess of fulvic acids, 93-96 mg g^-1, was chemisorbed onto biochar obtained specifically from sewage sludge. The mechanism of the adsorption was independent from applied biochar feedstock. Monolayer coverage was dominant onto all biochars. Generally, adsorption was assumed to be controlled by polar interactions between fulvic acids and the biochars or pre-adsorbed and residual fulvic acids molecules (which were dominant) and the strong π-π interactions. The obtained high values of the adsorption capacity of sewage sludge derived biochars confirmed that thermal treatment is a very effective tool of bio-waste management.

Superhydrophobic-superoleophilic biochar-based foam for high-efficiency and repeatable oil-water separation

Leakage accidents occurring during oil production and transportation are currently one of the most serious environmental problems worldwide. Developing efficient and environmentally friendly oil-water separation methods is the key to solve this problem. In this work, a facile method to fabricate a high-performance oil absorbent through the loading of ball-milled biochar (BMBC) and octadecylamine on the skeleton of melamine foam (MF) is reported. The resulting ball-milled biochar-based MF (BMBC@MF) displayed a complex three-dimensional porous structure. The BM biochar on the surface of BMBC@MF forms nano/μm-scale folds, which reduced the surface energy of BMBC@MF after grafted octadecylamine. These structures resulted in the conversion of the hydrophilic surface of MF to hydrophobic surface. These characteristics made the modified foam an excellent oil absorbent with a high oil absorption capacity (43-155 times its own weight) and extraordinary recyclability. Furthermore, the BMBC@MF could maintain high hydrophobicity and adsorption stability in a wide pH range (from 1 to 11). More importantly, BM biochar is a cheap and readily available material to make BMBC@MF possible for large-scale production. Therefore, this work provides an effective way for low-cost, environmentally friendly, and large-scale production of superhydrophobic adsorbents for oil-water separation.

Preparation and bacteriostatic research of porous polyvinyl alcohol / biochar / nanosilver polymer gel for drinking water treatment

Microbial contamination in drinking water has become an important threat to human health. There is thus an urgent need to develop antibacterial materials to treat drinking water. Here, porous silver-loaded biochar (C–Ag) was prepared using corn straw as the substrate and silver as the antibacterial agent. C–Ag was then uniformly distributed in polyvinyl alcohol gel beads of eluted calcium carbonate to prepare p-PVA/C–Ag antibacterial composite. The polymer composites were tested by FT-IR, XRD, SEM and TG-DSC. The results showed that C–Ag was more evenly distributed in the PVA gel spheres. Antibacterial experiments showed that p-PVA/C–Ag greatly inhibited Escherichia coli. Practical application tests revealed that p-PVA/C–Ag showed high and sustained bactericidal inhibition and reusability. Generally, p-PVA/C–Ag composite shows high potential to be applied to drinking water treatment.

Fabrication of thiophene-chitosan hydrogel-trap for efficient immobilization of mercury (II) from aqueous environs

The fabrication of thiophene-chitosan (TCS) hydrogel has been carried out to show the excellent binding performance of Hg(II) from an aqueous solution of heavy metal ions in presence of thiophene moiety within the hydrogel network. Thiophene moiety has been implanted within chitosan, a wild bio-resources, through a facile Schiff base condensation strategy with 2-thiophenecarboxaldehyde to develop a three-dimensional network of TCS hydrogel. The parameters influencing adsorption capacity such as pH, volume of functional agent, contact time, amount of the hydrogel are included to broaden the in-depth study for the adsorption window of Hg(II) followed by the desorption and reusability performance of TCS. The results indicate that the TCS hydrogel for Hg(II) followed pseudo-second-order kinetics. Ethylenediaminetetraacetic acid (EDTA), acts as a better eluent compared to HCl to desorb Hg(II) and even after recurring adsorption/desorption cycles, removal efficacy of TCS hydrogel could be retained.

Adsorption as a Process for Produced Water Treatment: A Review

Produced water (PW) is a by-product of oil and gas operations, and its production is foreseen to increase in the upcoming years. Such an increase is justified by various entities through their projection of the expected increase in the demand of oil and gas. The treatment of produced water is a significantly growing challenge for the oil and gas industry that requires serious attention. The first part of this review will present the underlying issue of produced water and relevant practices. With adsorption being defined as the least expensive treatment method, the second part will introduce general adsorption principals. The third part will describe the recent applications of adsorption for the treatment of PW with more focus of categorizing the adsorbents as natural and non-natural adsorbents. The main aim of this review is to shed light on the recent research related to PW treatment using adsorption. This is performed to highlight the shortcomings in PW adsorption research and recommend research pathways that can help in developing the field further.

Adsorption and molecular weight fractionation of dissolved organic matters with different origins on colloidal surface

Dissolved organic matter (DOM) adsorption on colloid surface occurred ubiquitously in aquatic ecosystems, while variations in molecular weight (MW) distribution during adsorption remained poorly understood. In this study, the adsorption and MW fractionation of aquatic DOMs with different origins (e.g., macrophyte- and algae-derived, MDOM and ADOM, respectively) on colloid surface were examined using total organic carbon, absorption and fluorescence spectroscopy, and flow field flow fractionation (FlFFF) analysis. Both the total organic carbon and spectroscopic results showed the predominant adsorption of DOMs within the first 45 min, which behaved not synchronously with MW fractionation. Quantitative FlFFF analysis further indicated that the organic ligands with different MWs exhibited different adsorption affinities on colloid surface. It was found that 5-15 kDa and 50 kDã0.45 μm were preferential adsorption fraction for humic- and protein-like MDOM, respectively, while 0.3-2 kDa and 0.3-50 kDa were preferential adsorption fraction for humic- and protein-like ADOM, respectively. Therefore, the MW fractionation of DOMs upon adsorption was highly dependent on DOM origins as well as specific components. Results obtained herein can enlarge our insights into adsorption and the resultant behavior and fate of DOMs that were highly related with the MW fractionation in aquatic environments.

Covalent organic frameworks as an efficient adsorbent for controlling the formation of disinfection by-products (DBPs) in chlorinated drinking water

2,5-Dimethyl-p-phenylenediamine-1,3,5-triformylphloroglucinol covalent organic frameworks (PATP COF) were prepared and used as novel adsorbent for controlling the formation potential (FP) and reducing the toxic potential of both carbonaceous disinfection by-products (C-DBPs) and nitrogenous DBPs (N-DBPs) during their subsequent chlorination. During the PATP COF adsorption pretreatment process, the FP of C-DBPs, N-DBPs and total organic halogen (TOX) were reduced by 86.5, 75.4 and 81.1%, respectively. These removal efficiencies were significantly higher when compared with those obtained using a traditional activated carbon (AC) adsorption pretreatment process (42.7, 19.4 and 28.7%, respectively). By comprehensive toxicity calculations, a significant reduction in both the acute and chronic toxic potential of C-DBPs and N-DBPs were observed during the PATP COF adsorption process (with reduction rates of ~85 and ~ 75% observed for the C-DBPs and N-DBPs, respectively), which were comparable to the removal efficiencies observed for C-DBPs FP and N-DBPs FP by weight, suggesting the simultaneous and effective control of DBPs FP and their toxic potential. Cycling tests and stability trial also showed the excellent reusability, wide pH adaptability, and high stability of PATP COF, demonstrating its great potential application to the treatment of drinking water.

Ionic Cross-Linking Fabrication of Chitosan-Based Beads Modified with FeO and TiO2 Nanoparticles: Adsorption Mechanism toward Naphthalene Removal in Seawater from Cartagena Bay Area

Polycyclic aromatic hydrocarbons (PAHs) are complex molecules produced by the thermal decomposition of organic matter in anthropogenic activities. Novel composites with enhanced physicochemical properties aim to overcome limitations such as adsorption capacity, affinity, and stability for PAHs adsorption. Composites based on chitosan are promising due to the good biocompatibility and adsorption properties. This study focuses on the facile preparation of chitosan beads modified with iron oxide (FeO) and titanium dioxide (TiO₂) nanoparticles via ionic cross-linking (Ch-FeO/TiO₂). FeO and TiO₂ were synthesized performing co-precipitation and green chemistry methods, respectively. The characterization evidenced the formation of Ch-FeO/TiO₂ with good crystallinity, excellent thermal stability, and superparamagnetic response, attributed to the presence of FeO and TiO₂ nanoparticles. High thermal stability up to 270 °C was related to the cross-linked chitosan network. The enhanced adsorption mechanism of Ch-FeO/TiO₂ was determined by removing naphthalene from water and seawater samples. The Ch-FeO/TiO₂ showed a higher adsorption capacity of 33.1 mg/g compared to 29.8 mg/g of the unmodified chitosan (un-Ch) beads. This is due to the higher functional surface area of 27.13 m²/g, compared to that of 0.708 m²/g for un-Ch. We found a rapid adsorption rate of 240 min and the maximum adsorption capacity of 149.3 mg/g for Ch-FeO/TiO₂. A large number of actives sites allows for increasing the naphthalene molecules interaction. Adsorption in seawater samples from Cartagena Bay (Colombia) exhibits an outstanding efficiency of up to 90%. These results suggest a promising, cheap, and environmentally friendly composite for remediation of water sources contaminated with complex compounds.

Chitosan Modified Biochar Increases Soybean (Glycine max L.) Resistance to Salt-Stress by Augmenting Root Morphology, Antioxidant Defense Mechanisms and the Expression of Stress-Responsive Genes

Soybean is an important oilseed crop that provides high-quality protein and vegetable oil. Salinity constitutes a negative abiotic factor that reduces soybean plant growth, production, and quality. The adsorption of Na⁺ by chitosan-modified biochar (CMB) has a significant effect on salinity but the application of CMB is limited in soybean. In the current study, CMB was used for characterization of physiological, biochemical, and molecular responses of soybean under salt stress. Comparison of CMB and unmodified (as-is) biochar (BR) demonstrated a significant difference between them shown by using Fourier transform infrared spectroscopy (FTIR), scan electron microscopy (SEM), Brunauer-Emmett-Teller (BET), elemental analysis and z-potential measurement. Pseudo-first and second-order better suited for the analysis of Na⁺ adsorption kinetics. The salt-stress reduced the soybean plants growth, root architecture characteristics, biomass yield, nutrients acquisition, chlorophyll contents, soluble protein, and sugar contents, while CMB with salt-stress significantly increased the above parameters. Moreover, CMB also reduced the salinity-induced increase in the Na⁺, glycine betaine (GB), proline, hydrogen peroxide (H₂O₂), and malondialdehyde (MDA) levels in plants. The antioxidant activity and gene expression levels triggered by salinity but with the application of CMB significantly further boosted the expression profile of four genes (CAT, APX, POD and SOD) encoding antioxidant enzyme and two salt-tolerant conferring genes (GmSALT3 and CHS). Overall, these findings demonstrate the crucial role of CMB in minimizing the adverse effects of high salinity on soybean growth and efficiency of the mechanisms enabling plant protection from salinity through a shift of the architecture of the root system and enhancing the antioxidant defense systems and stress-responsive genes for achieving sustainable crop production.

A critical review of the production and advanced utilization of biochar via selective pyrolysis of lignocellulosic biomass

Biochar is a carbon-rich product obtained from the thermo-chemical conversion of biomass. Studying the evolution properties of biochar by in-situ modification or post-modification is of great significance for improving the utilisation value of lignocellulosic biomass. In this paper, the production methods of biochar are reviewed. The effects of the biomass feedstock characteristics, production processes, reaction conditions (temperature, heating rate, etc.) as well as in-situ activation, heteroatomic doping, and functional group modification on the physical and chemical properties of biochar are compared. Based on its unique physicochemical properties, recent research advances with respect to the use of biochar in pollutant adsorbents, catalysts, and energy storage are reviewed. The relationship between biochar structure and its application are also revealed. It is suggested that a more effective control of biochar structure and its corresponding properties should be further investigated to develop a variety of biochar for targeted applications.