Biocomponent-based microalgal transformations into biofuels during the pretreatment and fermentation process

Advanced biofuel production, policy and technological implementation of nano-additives for sustainable environmental management - A critical review

This review article critically evaluates the significance of adopting advanced biofuel production techniques that employ lignocellulosic materials, waste biomass, and cutting-edge technology, to achieve sustainable environmental stewardship. Through the analysis of conducted research and development initiatives, the study highlights the potential of these techniques in addressing the challenges of feedstock supply and environmental impact and implementation policies that have historically plagued the conventional biofuel industry. The integration of state-of-the-art technologies, such as nanotechnology, pre-treatments and enzymatic processes, has shown considerable promise in enhancing the productivity, quality, and environmental performance of biofuel production. These developments have improved conversion methods, feedstock efficiency, and reduced environmental impacts. They aid in creating a greener and sustainable future by encouraging the adoption of sustainable feedstocks, mitigating greenhouse gas emissions, and accelerating the shift to cleaner energy sources. To realize the full potential of these techniques, continued collaboration between academia, industry representatives, and policymakers remains essential.

Glucose Conversion for Biobutanol Production from Fresh Chlorella sorokiniana via Direct Enzymatic Hydrolysis

Microalgae, which accumulate considerable carbohydrates, are a potential source of glucose for biofuel fermentation. In this study, we investigated the enzymatic hydrolysis efficiency of wet microalgal biomass compared with freeze-dried and oven-dried biomasses, both with and without an acidic pretreatment. With the dilute sulfuric acid pretreatment followed by amy (α-amylase and amyloglucosidase) and cellulase hydrolysis, approximately 95.4% of the glucose was recovered; however, 88.5% was released by the pretreatment with 2% (w/v) sulfuric acid, which indicates the potential of the acids for direct saccharification process. There were no considerable differences in the glucose yields among the three kinds of materials. In the direct amy hydrolysis without any pretreatment, a 78.7% glucose yield was obtained, and the addition of cellulase had no significant effect on the hydrolysis to glucose. Compared with the oven-dried biomass, the wet biomass produced a substantially higher glucose yield, which is possibly because the cross-linked cells of the oven-dried biomass prevented the accessibility of the enzymes. According to the results, the fresh microalgal biomass without cell disruption can be directly used for enzymatic hydrolysis to produce glucose. The enzymatic hydrolysate of the wet microalgal biomass was successfully used for acetone–butanol–ethanol (ABE) fermentation, which produced 7.2 g/L of ABE, indicating the application potential of wet microalgae in the bioalcohol fuel fermentation process.

Critical review of biochemical pathways to transformation of waste and biomass into bioenergy

In recent years, biofuel or biogas have become the primary source of bio-energy, providing an alternative to conventionally used energy that can meet the growing energy demand for people all over the world while reducing greenhouse gas emissions. Enzyme hydrolysis in bioethanol production is a critical step in obtaining sugars fermented during the final fermentation process. More efficient enzymes are being researched to provide a more cost-effective technique during enzymatic hydrolysis. The exploitation of microbial catabolic biochemical reactions to produce electric energy can be used for complex renewable biomasses and organic wastes in microbial fuel cells. In hydrolysis methods, a variety of diverse enzyme strategies are used to promote efficient bioethanol production from various lignocellulosic biomasses like agricultural wastes, wood feedstocks, and sea algae. This paper investigates the most recent enzyme hydrolysis pathways, microbial fermentation, microbial fuel cells, and anaerobic digestion in the manufacture of bioethanol/bioenergy from lignocellulose biomass.

Current trends in the pretreatment of microalgal biomass for efficient and enhanced bioenergy production

Biofuels from microalgal biomass is among some of the promising sustainable energy technologies that can significantly replace the dependence on fossil fuels worldwide due to potentiality to lower CO₂ emissions. Nevertheless, the extraction of biomolecules for biofuel generation is inhibited by the rigidity of the cellular structure of microalgal biomass. Various pretreatment strategies have been evaluated for their efficacy in microalgal cell wall disruption to enhance microalgal bioenergy production. However, the efficiency of the pretreatment methods depend on the particular species being treated due to the inherent variability of the composition of the cell wall. This paper reviews pretreatment strategies (mainly novel physical, chemical and physicochemical) employed in bioenergy generation from microalgal biomass, address existing constraints and provides prospects for economic and industrial-scale production. The authors have also discussed the different pretreatment methods used for biodiesel, bioethanol, and biohydrogen production.

Valorization of agro-food wastes: Ease of concomitant-enzymes production with application in food and biofuel industries

The novel and greener approach toward the co-production of hydrolytic enzymes in a single-cultivation medium with inexpensive substrates can bring down the production costs. Likewise, the natural and industrial organic biomass/solid are all nutritionally rich substrates waiting for free use in industries such as food, biofuel, etc. Valorization must broaden its applications in industries and households with a step towards a sustainable environment. The biofuel approach can be projected as one of the most promising deputations to meet future energy demands, in reduction of the environmental pollution due to excessive fossil fuel consumption. The present review highlights the multifaceted stature of microbial enzymes in this direction and possible implications mainly in the food industry and biofuel with the global impact of similar bio-based industries. In this review, design scale-up, fermentation cost, energy needs,and agro-food waste management have been meticulously delineated.

Feasibility assessment of bioethanol production from humic acid-assisted alkaline pretreated Kentucky bluegrass (Poa pratensis L.) followed by downstream enrichment using direct contact membrane distillation

The effective fractionation of structural components of abundantly available lignocellulosic biomass is essential to unlock its full biorefinery potential. In this study, the feasibility of humic acid on the pretreatment of Kentucky bluegrass biomass in alkaline condition was assessed to separate 70.1% lignin and hydrolyzable biocomponents. The humic acid-assisted delignification followed by enzymatic saccharification yielded 0.55 g/g of reducing sugars from 7.5% (w/v) pretreated biomass loading and 16 FPU/g of cellulase. Yeast fermentation of the biomass hydrolysate produced 76.6% (w/w) ethanol, which was subsequently separated and concentrated using direct contact membrane distillation. The hydrophobic microporous flat-sheet membrane housed in a rectangular-shaped crossflow module and counter-current mode of flow of the feed (hot) and distillate (cold) streams yielded a flux of 11.6 kg EtOH/m²/24 h. A modular, compact, flexible, and eco-friendly membrane-integrated hybrid approach is used for the first time to effectively valorize Kentucky bluegrass biomass for sustainable production of biofuel.

Cell disruption and astaxanthin extraction from Haematococcus pluvialis: Recent advances

The green microalga Haematococcus pluvialis is an excellent source of astaxanthin, a powerful antioxidant widely used in cosmetics, aquaculture, health foods, and pharmaceuticals. This review explores recent developments in cell disruption and astaxanthin extraction techniques applied using H. pluvialis as a model species for large-scale algal biorefinery. Notably, this alga develops a unique cyst-like cell with a rigid three-layered cell wall during astaxanthin accumulation (∼4% of dry weight) under stress. The thick (∼2 µm), acetolysis-resistant cell wall forms the strongest barrier to astaxanthin extraction. Various physical, chemical, and biological cell disruption methods were discussed and compared based on theoretical mechanisms, biomass status (wet, dry, and live), cell-disruption efficacy, astaxanthin extractability, cost, scalability, synergistic combinations, and impact on the stress-sensitive astaxanthin content. The challenges and future prospects of the downstream processes for the sustainable and economic development of advanced H. pluvialis biorefineries are also outlined.

Microalgae-based carbohydrates: A green innovative source of bioenergy

Microalgae contribute significantly to the global carbon cycle through photosynthesis. Given their ability to efficiently convert solar energy and atmospheric carbon dioxide into chemical compounds, such as carbohydrates, and generate oxygen during the process, microalgae represent an excellent and feasible carbohydrate bioresource. Microalgae-based biofuels are technically viable and, delineate a green and innovative field of opportunity for bioenergy exploitation. Microalgal polysaccharides are one of the most versatile groups for biotechnological applications and its content can be increased by manipulating cultivation conditions. Microalgal carbohydrates can be used to produce a variety of biofuels, including bioethanol, biobutanol, biomethane, and biohydrogen. This review provides an overview of microalgal carbohydrates, focusing on their use as feedstock for biofuel production, highlighting the carbohydrate metabolism and approaches for their enhancement. Moreover, biofuels produced from microalgal carbohydrate are showed, in addition to a new bibliometric study of current literature on microalgal carbohydrates and their use.

Silica Coating of Metal-Loaded H-ZSM-22 to Form the Core-Shell Nanostructures: Characterization, Textural Properties, and Catalytic Potency in the Esterification of Oleic Acid

In this study, ZSM-22 was synthesized using N,N-diethylaniline as a template through a hydrothermal method. The proton and various metals such as zirconium, strontium, and iron were immobilized on the surface of obtained zeolites through the ion exchange method. The catalysts were studied by Fourier-Transform Infrared Spectroscopy (FT-IR), X-Ray Diffraction (XRD), Brunauer–Emmett–Teller (BET) adsorption isotherms, Transmission Electron Microscope (TEM), Scanning Electron Microscope (SEM), Inductively Coupled Plasma-Optical Emission Spectrometry (ICP-OES) elemental analysis, and Temperature-Programmed Desorption of ammonia (TPD-NH3) technique for determining the number of acid sites. In the esterification reaction of oleic acid, the operating conditions such as catalyst dosage, temperature, molar ratio of methanol to oil, and reaction time were optimized and adjusted at 11 wt%, 70°C, 10 : 1, and 48 h subsequently. The maximum yield% of 48.07% was achieved in the presence of Zr-H-ZSM-22 at optimum conditions. In order to improve the efficiency of three zeolites Zr-H-ZSM-22, Fe-H-ZSM-22, and Sr-H-ZSM-22, the core-shell structures with SiO2 coating were prepared. Zr-H-ZSM-22@SiO2 was less active than Zr-H-ZSM-22 due to the SiO2 coverage of Lewis active sites.

High-throughput integrated pretreatment strategies to convert high-solid loading microalgae into high-concentration biofuels

The commercial feasibility of energy-efficient conversion of highly concentrated microalgal suspensions to produce high-titer biofuels is a major bottleneck due to high energy consumption. Herein, high-titer biofuels (bioethanol, higher-alcohols, and biodiesel) were generated from carbohydrate-rich Chlamydomonas mexicana and lipid-rich Chlamydomonas pitschmannii biomass through energy-saving microwave pretreatment, successive fermentation, and transesterification. Microwave pretreatment needed low specific energy (4.2 MJ/kg) for 100 g/L of microalgal suspension. Proposed sustainable integrated pretreatments method achieved unprecedented total conversion efficiency (67%) and highest biomass utilization (87%) of C. pitschmannii (100 g/L) with high yields of bioethanol (0.48 g-ethanol/g-carbohydrates), higher-alcohols (0.44 g-higher-alcohols/g-proteins), and biodiesel (0.90 g-biodiesel/g-lipids). Transmission electron microscopy showed the changes in the microalgal cellular integrity before and after sequential fermentations. Energy-efficient integrated pretreatments enhanced the extraction efficiency and whole utilization of high-concentration microalgae to generate high-titer biofuels with minimum waste production.

Pyrolysis of High-Ash Natural Microalgae from Water Blooms: Effects of Acid Pretreatment

Natural microalgae (NA, cyanobacteria) collected from Taihu Lake (Jiangsu, China) were used for biofuel production through pyrolysis. The microalgae were de-ashed via pretreatment with deionized water and hydrochloric acid, and the samples obtained were noted as 0 M, 0.1 M, 1 M, 2 M, 4 M, 6 M, 8 M, respectively, according to the concentration of hydrochloric acid used in the pretreatment. Pyrolysis experiments were carried out at 500 °C for 2 h. The products were examined by various techniques to identify the influence of the ash on the pyrolysis behavior. The results showed that the ash inhibited the thermal transformation of microalgae. The 2 mol/L hydrochloric acid performed the best in removing ash and the liquid yield increased from 34.4% (NA) to 40.5% (2 M). Metal-oxides (mainly CaO, MgO, Al₂O₃) in ash promoted the reaction of hexadecanoic acid and NH₃ to produce more hexadecanamide, which was further dehydrated to hexadecanenitrile. After acid pretreatment, significant improvement in the selectivity of hexadecanoic acid was observed, ranging from 22.4% (NA) to 58.8% (4 M). The hydrocarbon compounds in the liquid product increased from 12.90% (NA) to 26.67% (2 M). Furthermore, the acid pretreatment enhanced the content of C₉–C₁₆ compounds and the HHV values of bio-oil. For natural microalgae, the de-ashing pretreatment before pyrolysis was essential for improving the biocrude yield and quality, as well as the biomass conversion efficiency.

Substrate degradation, biodiesel production, and microbial community of two electro-fermentation systems on treating oleaginous microalgae Nannochloropsis sp

Electro-fermentation system (EFS) emerges its effectiveness on treating microalgae for biodiesel production, but much is unknown about biodegradation behaviors, biodiesel characteristics, and microbial community. Compared with conventional fermentation system (CFS), microbial electrolysis cell-based EFS (MEC-EFS) and microbial fuel cell-based EFS (MFC-EFS) were investigated for the performance while treating microalgae Nannochloropsis sp. Results indicated that MEC-EFS presented much higher first-order decomposition rate coefficients of carbohydrates and proteins (1.212/d and 0.951/d) than those of CFS (0.615/d and 0.794/d) and MFC-EFS (0.518/d and 0.415/d). Compared with MFC-EFS, MEC-EFS showed better electrochemical performance (2.17 A/m³vs. 0.95 A/m³). Moreover, MEC-EFS reached the highest extracted lipid to biomass ratio (43.3%), followed by MFC-EFS (32.3%) and CFS (27.7%). By strengthened microbial biohydrogenation, MEC-EFS and MFC-EFS had higher saturated fatty acids ratio (78.8% and 70.6%) than that of CFS (56.1%). For MEC-EFS, enriched Ruminococcus and Geobacter in anodic biofilm might contribute to favorable biohydrogenation and electrochemical performance.

Evaluation of pretreatments for solubilisation of components and recovery of fermentable monosaccharides from microalgae biomass grown in piggery wastewater

Microalgae-bacteria biomass cultured in wastewater is an interesting renewable material capable of metabolising nutrients from wastes into carbohydrates, proteins, and lipids through photosynthesis. Despite the interest in the valorisation of this biomass to improve the viability of microalgae-based wastewater treatment processes, very scarce research has been devoted to the fractional recovery of its components. This work evaluates the effect of different pretreatments coupled with enzymatic hydrolysis on the solubilisation of biomass components and on the recovery of fermentable monosaccharides (glucose and xylose) from Scenedesmaceae based biomass grown in a thin layer reactor feed with piggery wastewater. Chemical pretreatments generated high concentrations of byproducts, mainly organic acids. No bacterial DNA was found in these pretreated biomasses. The acid pretreatment provided the highest carbohydrate solubilisation (98%) and monosaccharide recovery (81%). Enzymatic hydrolysis coupled with alkaline NaOH 2 M pretreatment achieved almost complete solubilisation of the biomass components, but high carbohydrate losses. Physical pretreatments remarkably increased the solubilisation of the biomass components during the enzymatic hydrolysis step, especially bead milling, which achieved solubilisation yields of 83% of carbohydrates, 43% of proteins, and 60% of lipids. The presence of viable bacteria in these pretreated biomasses could be related to the high carbohydrate losses and the generation of methanol and ethanol in addition to organic acids as byproducts.

Identification of critical versus robust processing unit operations determining the physical and biochemical properties of cassava-based semolina (gari)

The gari-making process involves several unit operations (U.O.), some of which strongly influence the quality of the end product. Two contrasting process scales (laboratory-scale vs conventional) were compared in order to identify which U.O. were affected by the change of scale. U.O. that changed end-product characteristics depending on process scale were deemed critical; whereas U.O. that resulted in similar characteristics were deemed robust. The classification depended on quality attributes considered: rasping and roasting were critical for physical properties, in particular particle size which ranged from 0.44 to 0.89 mm between the two process scales; and robust for biochemical properties. In contrast, fermentation and pressing were critical for biochemical properties such as lactic acid content (0.93-1.88 g/100 g dry matter after pressing), which influences the perception of flavour, and robust for physical properties. This classification between critical and robust operations help quality control of gari, by pinpointing which U.O. control specific quality characteristics.

Hog1 Controls Lipids Homeostasis Upon Osmotic Stress in Candida albicans

As opportunistic pathogen, Candida albicans adapts to different environmental conditions and its corresponding stress. The Hog1 MAPK (Mitogen Activated Protein Kinase) was identified as the main MAPK involved in the response to osmotic stress. It was later shown that this MAPK is also involved in the response to a variety of stresses and therefore, its role in virulence, survival to phagocytes and establishment as commensal in the mouse gastrointestinal tract was reported. In this work, the role of Hog1 in osmotic stress is further analyzed, showing that this MAPK is involved in lipid homeostasis. The hog1 mutant accumulates lipid droplets when exposed to osmotic stress, leading to an increase in cell permeability and delaying the endocytic trafficking routes. Cek1, a MAPK also implicated in the response to osmotic challenge, did not play a role in lipid homeostasis indicating that Hog1 is the main MAP kinase in this response. The alteration on lipid metabolism observed in hog1 mutants is proposed to contribute to the sensitivity to osmotic stress.

Energy-efficient pretreatments for the enhanced conversion of microalgal biomass to biofuels

The physiological properties, including biochemical composition and cell wall thickness, of microalgal species have a remarkable effect on the pretreatment of biomass and its further conversion to biofuels. In the present study, multiple biofuels (bioethanol, higher alcohols (C3-C5), and biodiesel) were produced using energy-efficient microwave pretreatment, successive carbohydrate/protein fermentation, and lipid transesterification from three microalgal strains (Pseudochlorella sp., Chlamydomonas mexicana, and Chlamydomonas pitschmannii). The microwave pretreatment method required the lowest specific energy (5 MJ/kg) compared to ultrasound pretreatment. The proposed integrated approach achieved high conversion efficiency (46%) and maximum biomass utilization (93%) of C. mexicana with improved yields of bioethanol (0.46 g-ethanol/g-carbohydrates), higher alcohols (0.44 g-higher alcohols/g-proteins), and biodiesel (0.74 g-biodiesel/g-lipids). This study suggests that the application of an appropriate pretreatment method for microalgal strains having different physiological properties is essential for improving the extraction efficiency and conversion of biomass to biofuels with less waste production.