Sustainable valorization of sugar industry waste: Status, opportunities, and challenges

Optimization of microwave-expanding pretreatment and microwave-assisted extraction of hemicellulose from bagasse cells with the exploration of the extracting mechanism

Hemicellulose is mainly distributed in the tightly packed S2 layer of the plant cell wall and the middle lamella. This rigid microstructure of wood and interactions among hemicellulose, lignin, and cellulose jointly restrict the separation and transformation of hemicellulose in the wood matrix. To address this issue, a method combined with microwave-expanding pretreatment (MEP) and microwave-assisted extraction (MAE) with a NaOH solution was carried out. We found that the MEP could effectively create new pathways for bagasse cells in mass transferring. More specifically, 195 % of the specific surface area (m2/g) with 193 % of the pores (>50 nm) increased after MEP; the SEM images also confirmed that the microstructure of bagasse was modified. MAE could considerably exfoliate hemicellulose from cellulose fiber and accelerate mass transfer. Additionally, we optimized MEP and MAE by using response surface methodology (RSM). The optimal parameters were 370 K, 3.7 min, 1081 W microwave power, and 9.9 wt% NH4HCO3 consumption for the MEP and 1100 W microwave power, 2.5 wt% NaOH concentration, 34.6 min reaction time for MAE, respectively. Moreover, molecular dynamics (MD) simulation suggests that NaOH could significantly lower the work needed to peel off the xylan chain from cellulose nanofibril.

Silencing ScGUX2 reduces xylan glucuronidation and improves biomass saccharification in sugarcane

There is an increasing need for renewable energy sources to replace part of our fossil fuel-based economy and reduce greenhouse gas emission. Sugarcane bagasse is a prominent feedstock to produce cellulosic bioethanol, but strategies are still needed to improve the cost-effective exploitation of this potential energy source. In model plants, it has been shown that GUX genes are involved in cell wall hemicellulose decoration, adding glucuronic acid substitutions on the xylan backbone. Mutation of GUX genes increases enzyme access to cell wall polysaccharides, reducing biomass recalcitrance in Arabidopsis thaliana. Here, we characterized the sugarcane GUX genes and silenced GUX2 in commercial hybrid sugarcane. The transgenic lines had no penalty in development under greenhouse conditions. The sugarcane GUX1 and GUX2 enzymes generated different patterns of xylan glucuronidation, suggesting they may differently influence the molecular interaction of xylan with cellulose and lignin. Studies using biomass without chemical or steam pretreatment showed that the cell wall polysaccharides, particularly xylan, were less recalcitrant in sugarcane with GUX2 silenced than in WT plants. Our findings suggest that manipulation of GUX in sugarcane can reduce the costs of second-generation ethanol production and enhance the contribution of biofuels to lowering the emission of greenhouse gases.

Sugarcane bagasse-derived granular activated carbon hybridized with ash in bio-based alginate/gelatin polymer matrix for methylene blue adsorption

Sugarcane bagasse (SCB) and sugarcane bagasse ash (SCB-ash) are major agricultural residues from sugar processing industries in Thailand. In this study, SCB-derived activated carbon (SCBAC) with the optimum surface area of 489 m2/g was prepared by steam activation at 900 °C for 1 h. Hybrid granular activated carbons (GACs) were successfully developed by mixing SCBAC with bio-based polymers, alginate and gelatin, at the weight ratio of 3:1 for methylene blue (MB) adsorption. SCB-ash, which was additionally mixed in the GACs, could significantly increase compressive strength of the GACs, but decrease their surface areas and MB adsorption efficiencies. An existence of gelatin up to 30 wt% in the polymer matrix of the GACs showed a slight increase in swelling degree and iodine number, but could not enhance bead strength and MB adsorption efficiency due to its relatively lower bulk density and specific surface area. Maximum MB adsorption capacities of the GACs were found at 290-403 mg/g under this study's experimental condition. MB adsorption efficiencies at above 90 % with no deformation of all of the selected SCB hybrid GACs were finally confirmed after seven consecutive adsorption-desorption cycles using a simple regeneration with ethanol.

Effects of replacing hybrid giant napier with sugarcane bagasse and fermented sugarcane bagasse on growth performance, nutrient digestibility, rumen fermentation characteristics, and rumen microorganisms of Simmental crossbred cattle

This study investigated the effects of replacing hybrid giant napiers with sugarcane bagasse and fermented sugarcane bagasse on the growth performance, apparent nutrient digestibility, rumen fermentation characteristics, and rumen microorganisms of Simmental crossbred cattle. Twenty-one Simmental crossbred cattle with similar initial body weight (363.42 ± 8.67 kg) were randomly divided into three groups: Group CON (20% hybrid giant napier +45% distillers grains +35% concentrate mixture), Group SB (20% sugarcane bagasse +45% distillers grains +35% concentrate mixture), and Group FSB (20% fermented sugarcane bagasse +45% distillers grains +35% concentrate mixture). The average daily weight gain in the SB group was lower than in the CON group, no significant difference was found between the CON and FSB groups. The feed conversion ratio of the CON and FSB groups was lower compared to the SB group. The apparent digestibility of neutral detergent fiber and acid detergent fiber in the SB group was lower than in the CON group, no significant difference was found between the CON and FSB groups. The levels of NH3-N, microbial protein, acetate, propionate, butyrate, isobutyrate, and total volatile fatty acids were higher in the CON and FSB groups than in the SB group, no significant difference was found between the CON and FSB groups. The relative abundances of Christensenellaceae_R-7_group, Rikenellaceae_RC9_gut_group, Prevotellaceae_UCG-003, Saccharofermentans, and Eubacteriumcoprostanoligenes_group were lower in the CON and FSB groups compared to the SB group. The relative abundance of Succiniclasticum was highest in the FSB group, followed by the CON group and then the SB group. Correlation analysis showed that the relative abundance of Succiniclasticum was positively correlated with propionate and NH3-N content, while the relative abundance of Rikenellaceae_RC9_gut_group was inversely correlated with NH3-N content. Gene function prediction indicated that fermented sugarcane bagasse promoted rumen microbial amino acid metabolism. In conclusion, replacing hybrid giant napiers with 20% sugarcane bagasse negatively affected the growth performance of Simmental crossbred cattle, while the addition of 20% fermented sugarcane bagasse had no adverse effects on growth performance and rumen fermentation characteristics, and did not alter the abundance of the rumen core flora in Simmental crossbred cattle.

Food waste biorefinery towards circular economy in Australia

Staggering amounts of food waste are produced in Australia, and this review provides food waste based biorefinery opportunities in moving towards a circular economy in Australia. The current food waste scenario in Australia including an overview of primary food waste sources, government regulation, and current management practices is presented. The major food waste streams include fruit and vegetable (waste from wine grapes, citrus, apple, potato, and tomato), nuts (almond processing waste), seafood (Fish waste), dairy whey, sugarcane bagasse, and household and businesses. The composition of these waste streams indicated their potential for use in biorefineries to produce value-added products via various pathways combining direct extraction and biological and thermochemical conversion. Finally, the efforts made in Australia to utilize food waste as a resource, as well as the challenges and future directions to promote the development of concrete and commercially viable technologies for food waste biorefinery, are described.

Assessment of in situ stabilization and heavy metal toxicity reduction of sugar mill pressmud through pilot scale composting

Owing to a huge amount of industrial organic waste generation in the recent past, concerned industries are facing immense challenges for in situ treatment and disposal of such wastes. Therefore, in this study, the efficacy assessment of in situ windrow composting of pressmud (PM) produced by sugar industry has been investigated. Samples were grabbed and mixed from windrows having composting days of 15 (PM15), 30 (PM30), and 45 (PM45) and were collected along with a compost sample from the 60th day (PMC) windrow. An investigation of physico-chemical parameters including pH, electrical conductivity, moisture content, volatile solids (VS), ash content, biochemical oxygen demand, chemical oxygen demand, total nitrogen, and C/N ratio was performed for raw PM and other aforementioned samples. Moreover, speciation of heavy metals (Cu, Cr, Ni, Pb, Cd, and Zn), X-ray diffraction (XRD) and Fourier transform infrared (FTIR) spectroscopic analyses were performed for PM and PMC to evaluate the heavy metal toxicity and mineralogical and chemical changes. The analysis showed 20.33% reduction in VS content and 53.65% increase in TN content after 60 days of in situ windrow composting. The pH and EC values of PMC were found to be lesser than that of upper values recommended for agricultural purposes. Furthermore, the speciation analysis showed significant reduction in bioavailability of heavy metals. The XRD and FTIR results were confirmatory for transformation of heavy metals into relatively stable forms. The study recommends the windrow composting practice as effective bioconversion technique that stabilizes organic content, enhances humification, and diminishes heavy metal bioavailability for PM and similar other sludges.

Techno-Economic Analysis of 2,3-Butanediol Production from Sugarcane Bagasse

Sugarcane bagasse (SCB) is a significant agricultural residue generated by sugar mills based on sugarcane crop. Valorizing carbohydrate-rich SCB provides an opportunity to improve the profitability of sugar mills with simultaneous production of value-added chemicals, such as 2,3-butanediol (BDO). BDO is a prospective platform chemical with multitude of applications and huge derivative potential. This work presents the techno-economic and profitability analysis for fermentative production of BDO utilizing 96 MT of SCB per day. The study considers plant operation in five scenarios representing the biorefinery annexed to a sugar mill, centralized and decentralized units, and conversion of only xylose or total carbohydrates of SCB. Based on the analysis, the net unit production cost of BDO in the different scenarios ranged from 1.13 to 2.28 US$/kg, while the minimum selling price varied from 1.86 to 3.99 US$/kg. Use of the hemicellulose fraction alone was shown to result in an economically viable plant; however, this was dependent on the condition that the plant would be annexed to a sugar mill which could supply utilities and the feedstock free of cost. A standalone facility where the feedstock and utilities were procured was predicted to be economically feasible with a net present value of about 72 million US$, when both hemicellulose and cellulose fractions of SCB were utilized for BDO production. Sensitivity analysis was also conducted to highlight some key parameters affecting plant economics.

Anionic bio-flocculants from sugarcane for purification of sucrose: An application of circular bioeconomy

In sugar production, polyacrylamide-based anionic flocculants are added for juice treatment, the main objective being to remove impurities that affect the quality of the sugar. However, if they remain in the final product, those polymers can present carcinogenic and neurotoxic actions besides contaminating the soils where the waste is discharged. To overcome this problem, the present study proposes, for the first time, natural flocculants based on cellulose obtained from sugarcane bagasse (residue from sugarcane processing) as substitutes for the flocculants based on polyacrylamide, normally used in sugar cane juice purification. Additionally, cellulose-based flocculants obtained from Acacia wood, developed in a previous study, have also been tested for sugar juice treatment. Acacia wood and sugarcane bagasse were first treated with a choline chloride/levulinic acid solution in a molar ratio of 1:2, at 160 °C, for 4 h. Subsequently, the cellulose-rich samples were modified by a two-stage process (oxidation with sodium periodate followed by reaction with sodium metabisulfite), and polyelectrolytes with different characteristics were produced. The final products obtained were characterized, and their performance in the treatment of sugarcane juice, at different concentrations (10, 50, 100, 250, and 500 mg kg^-1), was evaluated and compared to the synthetic commercial flocculant (Flonex, based on polyacrylamide) usually used by the sugarcane industry in Brazil. The substitution of petrol-based flocculants by natural-based ones, obtained from sugarcane residues, is presented for the first time in this study, with very relevant performance of the new flocculants. Overall, it was possible to produce anionic flocculants, modifying the cellulose obtained from different raw materials, which showed good results in the purification of sucrose, when compared with the commercial polyacrylamide normally used. It is also important to stress that, for the first time, a residue from sugarcane industry could be used with success in the purification of the sugar juice itself, which constitutes a major novelty.

Fermentative valorisation of xylose-rich hemicellulosic hydrolysates from agricultural waste residues for lactic acid production under non-sterile conditions

Lactic acid (LA) is a platform chemical with diverse industrial applications. Presently, commercial production of LA is dominated by microbial fermentation using sugary or starch-based feedstocks. Research pursuits emphasizing towards sustainable production of LA using non-edible and renewable feedstocks have accelerated the use of lignocellulosic biomass (LCB). The present study focuses on the valorisation of xylose derived from sugarcane bagasse (SCB) and olive pits (OP) through hydrothermal and dilute acid pretreatment, respectively. The xylose-rich hydrolysate obtained was used for LA production by homo-fermentative and thermophilic Bacillus coagulans DSM2314 strain under non-sterile conditions. The fed-batch mode of fermentation resulted in maximum LA titers of 97.8, 52.4 and 61.3 g/L with a yield of 0.77, 0.66 and 0.71 g/g using pure xylose, xylose-rich SCB and OP hydrolysates, respectively. Further, a two-step aqueous two-phase system (ATPS) extraction technique was employed for the separation and recovery of LA accumulated on pure and crude xylose. The LA recovery was 45 - 65% in the first step and enhanced to 80-90% in the second step.The study demonstrated an efficient integrated biorefinery approach to valorising the xylose-rich stream for cost-effective LA production and recovery.

Oxidation of hydrochar produced from byproducts of the sugarcane industry for the production of humic-like substances: Characterization and interaction study with Cu(II)

Humic-like substances (HLS) are molecules extracted in an alkaline medium from different materials that have not been subjected to the natural process of humification that occurs in the soil. HLS have the potential to be used as organic fertilizers due to their ability to incorporate micronutrients such as Cu(II) and Co(II); in addition, they represent an alternative for the remediation of contaminated areas due to their high affinity for metals. HLS can be extracted from hydrochar (HC) but only with low yields of approximately 5%. Therefore, the present study aimed to increase the amount of HLS extracted from the HC produced from byproducts of the sugarcane industry through the oxidation of HC with HNO₃. HLS extracted from oxidized and unoxidized HC were characterized by CHNS analysis and ¹³C CPMAS NMR. The interaction between HLS and Cu(II) was studied by molecular fluorescence quenching (EEM-PARAFAC) and applying the Ryan and Weber complexation model. The oxidation of HC with HNO₃ allowed high yields of extracted HLS of above 80%. The oxidation carried out with 30% HNO₃ for 2 h showed the best result, since the HLS_30%(2h) were extracted with a very high yield (88.3%) in a short period of time. Oxidation promoted a decrease in HLS aromaticity and an increase in oxygen and nitrogen groups. HLS showed high affinity for Cu(II), as evidenced by the high logK values (between 5.5 and 5.9). HLS extracted from oxidized HCs showed higher complexation capacity due to the greater incorporation of the oxygenated groups promoted by oxidation, which are fundamental during the interaction with metallic cations. Therefore, the oxidation of HC substantially increased the production of HLS, representing a big advance for the production of carbonaceous materials with higher added value from byproducts of the sugarcane industry produced on a large scale in Brazil.

Commercialization potential of agro-based polyhydroxyalkanoates biorefinery: A technical perspective on advances and critical barriers

The exponential increase in the use and careless discard of synthetic plastics has created an alarming concern over the environmental health due to the detrimental effects of petroleum based synthetic polymeric compounds. Piling up of these plastic commodities on various ecological niches and entry of their fragmented parts into soil and water has clearly affected the quality of these ecosystems in the past few decades. Among the many constructive strategies developed to tackle this global issue, use of biopolymers like polyhydroxyalkanoates as sustainable alternatives for synthetic plastics has gained momentum. Despite their excellent material properties and significant biodegradability, polyhydroxyalkanoates still fails to compete with their synthetic counterparts majorly due to the high cost associated with their production and purification thereby limiting their commercialization. Usage of renewable feedstocks as substrates for polyhydroxyalkanoates production has been the thrust area of research to attain the sustainability tag. This review work attempts to provide insights about the recent developments in the production of polyhydroxyalkanoates using renewable feedstock along with various pretreatment methods used for substrate preparation for polyhydroxyalkanoates production. Further, the application of blends based on polyhydroxyalkanoates, and the challenges associated with the waste valorization based polyhydroxyalkanoates production strategy is elaborated in this review work.

Construction of Clostridium tyrobutyricum strain and ionic membrane technology combination pattern for refinery final molasses recovery and butyric acid production

Introduction

Clostridium tyrobutyricum has considerable prospect in the production of organic acids. Globally, refinery final molasses is rich in sugar and reported to have high levels of accumulation and high emission costs, recognized as an excellent substrate for C. tyrobutyricum fermentation, but there is no suitable method available at present.

Methods

In this study, an acid-base treatment combined with a new green membrane treatment technology - a dynamic ion-exchange membrane -was used to pretreat refinery final molasses, so that it could be used for C. tyrobutyricum to produce butyric acid. A high-performance liquid chromatography method was established to determine the conversion of a large amount of sucrose into fermentable sugars (71.88 g/L glucose and 38.06 g/L fructose) in the treated refinery final molasses. The process of sequential filtration with 3, 1, and 0.45 μm-pore diameter dynamic ion-exchange membranes could remove impurities, pigments, and harmful substances from the refinery final molasses, and retain the fermentable sugar.

Results and discussion

This means that refinery final molasses from the sugar industry could be utilized as a high-value by-product and used for the growth of C. tyrobutyricum, with industrial feasibility and economic competitiveness. Using the treated refinery final molasses as a carbon source, C. tyrobutyricum was screened by the method of adaptive evolution. The strain with butyric acid yielded 52.54 g/L, and the yield of the six carbon sugar was increased from 0.240 to 0.478 g/g. The results showed that combination of C. tyrobutyricum and ionic membrane technology broke through the bottleneck of its utilization of refinery final molasses. This study provided an innovative idea for the C. tyrobutyricum fermentation to produce butyric acid.

Biologically treated industrial wastewater disinfection using the synergy of low-frequency ultrasound and H2O2/O3

Biological wastewater treatment is mostly used in many industries to treat industrial influents. Treated water is consisting of an extremely high concentration of pathogenic microorganisms. Present work demonstrate the treatment of biologically treated sugar industry wastewater (BTSWW) using a low-frequency ultrasound (US). BTWSS consists of Enterobacter, Salmonella, and Escherichia Coli with a total coliform concentration of 2500 ± 300 CFU/mL. Experiments were performed using the individual effect of US, H2O2, and O3 and the combined effect of US with H2O2, O3, and H2O2 + O3. The complete removal of total coliform was obtained for the synergy effect of US with H2O2 and O3. The performance of the process was analyzed based on pseudo-first-order kinetic rate constant and synergy coefficient. The pseudo-first-order kinetic rate constant was 21.6 and 22.3 × 10-2 min-1 with a synergy coefficient of 2 and 1.9 for a combined effect of US with H2O2 and O3, respectively. Another advantage of the synergy of US and O3 was lower requirement of the initial dose of H2O2 (2.1 mM/L). The operational cost of the process was found to be $ 1.5 × 10-2 /MLD.

Graphical abstract

Sugarcane cultivation practices modulate rhizosphere microbial community composition and structure

Sugarcane (Saccharum spp.) represents a crop of great economic importance, remarkably relevant in the food industry and energy supply chains from renewable sources. However, its conventional cultivation involves the intensive use of fertilizers, pesticides, and other agrochemical agents whose detrimental effects on the environment are notorious. Alternative systems, such as organic farming, have been presented as an environmentally friendly way of production. Still, the outcomes of different cropping systems on the microbiota associated with sugarcane-whose role in its health and growth is crucial-remain underexplored. Thus, we studied the rhizospheric microbiota of two adjacent sugarcane fields, which differ in terms of the type of farming system. For this, we used the sequencing of taxonomic markers of prokaryotes (gene 16S rRNA, subregions V3-V4) and fungi (Internal transcribed spacer 2) and evaluated the changes caused by the systems. Our results show a well-conserved microbiota composition among farming systems in the highest taxonomic ranks, such as phylum, class, and order. Also, both systems showed very similar alpha diversity indices and shared core taxa with growth-promoting capacities, such as bacteria from the Bacillus and Bradyrhizobium genera and the fungal genus Trichoderma. However, the composition at more specific levels denotes differences, such as the separation of the samples concerning beta diversity and the identification of 74 differentially abundant taxa between the systems. Of these, 60 were fungal taxa, indicating that this microbiota quota is more susceptible to changes caused by farming systems. The analysis of co-occurrence networks also showed the formation of peripheral sub-networks associated with the treatments-especially in fungi-and the presence of keystone taxa in terms of their ability to mediate relationships between other members of microbial communities. Considering that both crop fields used the same cultivar and had almost identical soil properties, we conclude that the observed findings are effects of the activities intrinsic to each system and can contribute to a better understanding of the effects of farming practices on the plant microbiome.

Development of an economically competitive Trichoderma-based platform for enzyme production: Bioprocess optimization, pilot plant scale-up, techno-economic analysis and life cycle assessment

Despite decades of research and industrial applications of Trichoderma reesei, the development of industrially relevant strains for enzyme production including a low-cost and scalable bioprocess remains elusive. Herein, bioprocess optimization, pilot plant scale-up, techno-economic analysis and life-cycle assessment for enzyme production by an engineered T. reesei strain are reported. The developed bioprocess increased in ∼ 2-fold protein productivity (0.39 g.L-1.h-1) and 1.6-fold FPase activity (196 FPU.L-1.h-1), reducing the fermentation in 4 days. Cultivation in a 65-L pilot plant bioreactor resulted in 54 g.L-1 protein in 7 days, highlighting the robustness and scalability of this bioprocess. Techno-economic analysis indicates an enzyme cost of ∼ 3.2 USD.kg-1, which is below to the target proposed (4.24 USD.kg-1) in the NREL/TP-5100-47764 report, while life-cycle assessment shows a carbon footprint reduction of approximately 50% compared to a typical commercial enzyme. This study provides the fundamental knowledge for the design of economically competitive Trichoderma technologies for industrial use.

Improved production of biogas via microbial digestion of pressmud using CuO/Cu2O based nanocatalyst prepared from pressmud and sugarcane bagasse waste

Biogas production through anaerobic digestions of organic wastes using microbes is a potential alternative to maintain the long term sustainability of the environment and also to full-fill the energy demands and waste management issues. In this context, pressmud can be a vital substrate which is generated from sugarcane industries and found to be broadly available. In this work, biogas improvement has been investigated in presence of CuO/Cu₂O based nanocatalyst wherein pressmud is employed as a substrate in anaerobic digestion. Herein, CuO/Cu₂O based nanocatalyst has been prepared using the aqueous extract prepared from the combination of PM and SCB which is employed as a reducing agent. The physicochemical properties of CuO/Cu₂O nanocatalyst have been probed through different techniques and it is noticed that using 1.0 % CuO/Cu₂O based nanocatalyst employed in AD process, cumulative biogas 224.7 mL CH₄ /g VS could be recorded after 42 days.

Emerging challenges for the agro-industrial food waste utilization: A review on food waste biorefinery

Modernization and industrialization has undoubtedly revolutionized the food and agro-industrial sector leading to the drastic increase in their productivity and marketing thereby accelerating the amount of agro-industrial food waste generated. In the past few decades the potential of these agro-industrial food waste to serve as bio refineries for the extraction of commercially viable products like organic acids, biochemical and biofuels was largely discussed and explored over the conventional method of disposing in landfills. The sustainable development of such strategies largely depends on understanding the techno economic challenges and planning for future strategies to overcome these hurdles. This review work presents a comprehensive outlook on the complex nature of agro-industrial food waste and pretreatment methods for their valorization into commercially viable products along with the challenges in the commercialization of food waste bio refineries that need critical attention to popularize the concept of circular bio economy.

Pretreatment of milled and unchopped sugarcane bagasse with vortex based hydrodynamic cavitation for enhanced biogas production

Anaerobic digestion can potentially valorise sugarcane bagasse to biogas and fertiliser. Pretreatment is however required to overcome recalcitrance and enhance the biogas yields. Literature reporting the investigation of various biomass pretreatments often use milled biomass as substrate rather than as-received fibrous biomass. This does not establish the true influence of the pretreatment type on biogas generation. Additionally, milling energy is also ignored when calculating net energy gains from enhanced biogas yields and are thus misleading. In this work, a vortex-based hydrodynamic cavitation device was used to enhance the biomethane yields from fibrous as-received biomass for the first time. Clear justification on why milled biomass must not be used as substrates for demonstrating the effect of pretreatment on biogas production is also discussed. The net energy gain from milled hydrodynamic cavitation pre-treated bagasse can be similar to as-received bagasse only when the specific milling energy is ≤700 kWh/ton.

Suitability of Solvent-Assisted Extraction for Recovery of Lipophilic Phytochemicals in Sugarcane Straw and Bagasse

Sugarcane is primarily harvested to meet up to 80% of global sugar demand. Recently, lipids recovered from their biomass (straw and bagasse) have attracted much attention due to their possible utilisation in biofuel production but also by the presence of health-promoting compounds as phytosterols (i.e., improvement of cardiovascular function) or 1-octacosanol (i.e., anti-obesity). Although this fraction is commonly obtained through solid–liquid isolation, there is scarce information about how different solvents affect the composition of the extracts. This research work aimed to study whether, in sugarcane straw and bagasse samples, Soxtec extraction with widely used dichloromethane (DCM) would be suitable to recover most of the lipid classes when compared to other available solvents such as food grade ethanol (EtOH) or solvents without regulation restrictions for food and drug applications (i.e., acetone and ethyl acetate). The obtained results allow concluding that sugarcane waxes from straw and bagasse are complex lipid mixtures of polar and non-polar compounds. According to the extraction yield, the best results were obtained with ethanol (5.12 ± 0.30% and 1.97 ± 0.31%) for both straw and bagasse, respectively. The extractant greatly influenced the lipid composition of the obtained product. Thus, DCM enriched the isolates in glycerolipids (mono-, di- and triglycerides), free fatty acids, fatty alcohols, fatty aldehydes, phytosterols and hydrocarbons. On the other hand, EtOH resulted in polar isolates rich in glycolipids. Therefore, depending on the application and objectives of future research studies, the solvent to recover such lipids needs to be carefully selected.

Opportunities in the microbial valorization of sugar industrial organic waste to biodegradable smart food packaging materials

Many petroleum-derived plastics, including food packaging materials are non-biodegradable and designed for single-use applications. Annually, around 175 Mt. of plastic enters the land and ocean ecosystems due to mismanagement and lack of techno economically feasible plastic waste recycling technologies. Renewable sourced, biodegradable polymer-based food packaging materials can reduce this environmental pollution. Sugar production from sugarcane or sugar beet generates organic waste streams that contain fermentable substrates, including sugars, acids, and aromatics. Microbial metabolism can be leveraged to funnel those molecules to platform chemicals or biopolymers to generate biodegradable food packaging materials that have active or sensing molecules embedded in biopolymer matrices. The smart package can real-time monitor food quality, assure health safety, and provide economic and environmental benefits. Active packaging materials display functional properties such as antimicrobial, antioxidant, and light or gas barrier. This article provides an overview of potential biodegradable smart/active polymer packages for food applications by valorizing sugar industry-generated organic waste. We highlight the potential microbial pathways and metabolic engineering strategies to biofunnel the waste carbon efficiently into the targeted platform chemicals such as lactic, succinate, muconate, and biopolymers, including polyhydroxyalkanoates, and bacterial cellulose. The obtained platform chemicals can be used to produce biodegradable polymers such as poly (butylene adipate-co-terephthalate) (PBAT) that could replace incumbent polyethylene and polypropylene food packaging materials. When nanomaterials are added, these polymers can be active/smart. The process can remarkably lower the greenhouse gas emission and energy used to produce food-packaging material via sugar industrial waste carbon relative to the petroleum-based production. The proposed green routes enable the valorization of sugar processing organic waste into biodegradable materials and enable the circular economy.

A Review on the Production of C4 Platform Chemicals from Biochemical Conversion of Sugar Crop Processing Products and By-Products

The development and commercialization of sustainable chemicals from agricultural products and by-products is necessary for a circular economy built on renewable natural resources. Among the largest contributors to the final cost of a biomass conversion product is the cost of the initial biomass feedstock, representing a significant challenge in effective biomass utilization. Another major challenge is in identifying the correct products for development, which must be able to satisfy the need for both low-cost, drop-in fossil fuel replacements and novel, high-value fine chemicals (and/or commodity chemicals). Both challenges can be met by utilizing wastes or by-products from biomass processing, which have very limited starting cost, to yield platform chemicals. Specifically, sugar crop processing (e.g., sugarcane, sugar beet) is a mature industry that produces high volumes of by-products with significant potential for valorization. This review focuses specifically on the production of acetoin (3-hydroxybutanone), 2,3-butanediol, and C4 dicarboxylic (succinic, malic, and fumaric) acids with emphasis on biochemical conversion and targeted upgrading of sugar crop products/by-products. These C4 compounds are easily derived from fermentations and can be converted into many different final products, including food, fragrance, and cosmetic additives, as well as sustainable biofuels and other chemicals. State-of-the-art literature pertaining to optimization strategies for microbial conversion of sugar crop byproducts to C4 chemicals (e.g., bagasse, molasses) is reviewed, along with potential routes for upgrading and valorization. Directions and opportunities for future research and industrial biotechnology development are discussed.

Vinasse odyssey: sugarcane vinasse remediation and laccase production by Trametes sp. immobilized in polyurethane foam

Vinasse is a high pollutant liquid residue from bioethanol production. Due to its toxicity, most vinasse is used not disposed of in water bodies but employed for the fertigation of sugarcane crops, potentially leading to soil salinization or heavy metal deposition. The anaerobic digestion of vinasse for energy production is the main alternative to fertigation, but the process cannot eliminate colored compounds such as melanoidins, caramels, or phenolic compounds. The treatment of raw vinasse with white-rot fungi could remove colored and persistent toxic compounds, but is generally considered cost-ineffective. We report the treatment of vinasse by an autochthonous Trametes sp. strain immobilized in polyurethane foam and the concomitant production of high titers of laccase, a high value-added product that could improve the viability of the process. The reuse of the immobilized biomass and the discoloration of raw vinasse, the concentration of phenolic compounds, BOD and COD, and the phytotoxicity of the treated vinasse were measured to assess the viability of the process and the potential use of treated vinasse in fertigation or as a complementary treatment to anaerobic digestion. Under optimal conditions (vinasse 0.25X, 30 °C, 21 days incubation, 2% glucose added in the implantation stage), immobilized Trametes sp. causes a decrease of 75% in vinasse color and total phenolic compounds, reaching 1082 U L^-1 of laccase. The fungi could be used to treat 0.50X vinasse (BOD 44,400 mg O₂ L^-1), causing a 26% decolorization and a 30% removal of phenolic compounds after 21 days of treatment with maximum laccase titers of 112 U L^-1, while reducing COD and BOD from 103,290 to 42,500 mg O₂ L^-1 (59%) and from 44,440 to 21,230 mg O₂ L^-1 (52%), respectively. The re-utilization of immobilized biomass to treat 0.50X vinasse proved to be successful, leading to the production of 361 U L^-1 of laccase with 77% decolorization, 61% degradation of phenolic compounds, and the reduction of COD and BOD by 75% and 80%, respectively. Trametes sp. also reduced vinasse phytotoxicity to Lactuca sativa seedlings. The obtained results show that the aerobic treatment of vinasse by immobilized Trametes sp. is an interesting technology that could be employed as a sole treatment for the bioremediation of vinasse, with the concomitant the production of laccase. Alternatively, the methodology could be used in combination with anaerobic digestion to achieve greater decolorization and reduction of phenolic compounds, melanoidins, and organic load.

Anaerobic digestion of sugarcane bagasse for biogas production and digestate valorization

Sugarcane bagasse is an abundantly available agricultural waste having high potential that is still underutilized and mostly burnt as fuel. There are various processes available for bagasse utilization in improved ways and one such process is anaerobic digestion (AD) of bagasse for biogas production. The complex structure of biomass is recalcitrant to degradation and is a major hindrance for the anaerobic digestion, so different pretreatment methods are applied to deconstruct the bagasse for microbial digestion. In this review, different processes developed for the pretreatment of bagasse and their effect on biogas production have been extensively covered. Moreover, combination of pretreatment methods, co-digestion of bagasse with other waste (nitrogen rich or easily digestible) for enhanced biogas production and biomethane generation along with other value-added products has also been reviewed. The digestate contains a significant amount of organics with partial recovery of energy and products and is generated in huge amount that further creates disposal problem. Therefore, integration of digestate valorization with AD through gasification, pyrolysis, hydrothermal carbonization and use of microalgae for maximum recovery of energy and value-added products have also been evaluated. Thus, this review highlights major emerging area of research for improvement in bagasse based processes for enhanced biogas production along with digestate valorization to make the overall process economical and sustainable.

Food Additives from Fruit and Vegetable By-Products and Bio-Residues: A Comprehensive Review Focused on Sustainability

Food waste is one of the fundamental issues when it comes to environmental impacts, and this type of waste results in the food’s loss itself, but also that of water, energy, fertilizers, and other resources used for its production. Many vegetable parts are removed from the final product before reaching retail (peels, roots, and seeds), and these raw materials are rich sources of highly valuable molecules such as phytochemicals, minerals, vitamins, and other compounds with health benefits (prevention of several diseases, improvement of the immune system, regulating gastrointestinal transit, and others). Therefore, substantial efforts have been made to find technological solutions to avoid food waste, namely through its reuse in the food chain, thus promoting the circular economy and sustainability. This review focuses on the biggest wastes generated by the food industry, the most common destinations, and case studies applying these by-products or biowaste in the food industry.

Sugarcane valorization: selection of process routes based on sustainability index

Increasing awareness about sustainability has compelled the recent researchers to explore different methods for evaluation. Conventionally the sustainability of a process was majorly dependent on the economics feasibility. Recently need of incorporation of environmental and social concerns in overall sustainability assessment has been realized. Authors in their prior work has published a framework for performing sustainability assessment of biomass processing enterprises. The present work is on selection of sugarcane valorization pathways based on the sustainability index using the same framework. Six alternative routes are compared based on their economic, environment and social criteria. Life cycle assessment of each process is performed as per ISO 14040/44 to evaluate the environmental criteria. Integrated method of value function (MIVES) is used for consolidation of different indicators and criteria. Amongst the process alternatives considered for assessment, 1G2G ethanol route is observed to have highest sustainability index (0.864) owing to relatively lower environmental impact whereas first generation butanol production route (1GRS) had the least sustainability index of 0.090 on account of decreased yield and less products. Sensitivity analysis performed on the model showed no significant change in the ranking of the alternatives.

Cellulose-based antimicrobial films incroporated with ZnO nanopillars on surface as biodegradable and antimicrobial packaging

Biodegradable and antimicrobial films without antibiotics are of great significance for the application associated with food packaging meanwhile minimizing the negative impact on environments. In this work, cellulose-based films with the surface tailor-constructed with ZnO nanopillars (ZnO NPs@Zn²⁺/Cel films) were prepared via chemical crosslinking in conjunction with a hydrothermal process for in-situ growth of ZnO NPs. As a packaging material, ZnO NPs@Zn²⁺/Cel films possess excellent mechanical properties, oxygen and water vapor barrier, food preservation, biodegradability and low Zn²⁺ migration. Moreover, ZnO NPs@Zn²⁺/Cel films show remarkable antimicrobial activity, especially for Staphylococcus aureus (gram-positive bacteria) and Escherichia coli (gram-negative bacteria). The antimicrobial mechanism of ZnO NPs@Zn²⁺/Cel films is studied using the controlled variable method, and results showed that the film without UV pretreatment killed bacterial cells mainly by mechanical rupture, while the film with UV pretreatment killed bacterial cells mainly via the synergistic effect of photocatalytic oxidation and mechanical rupture.

Green GDP Indicator with Application to Life Cycle of Sugar Industry in Thailand

The objective of this study was to develop new indicators that reflect economic growth by taking into account the impact on the environment and natural resources as well. The indicator calculated by subtracting environmental cost from the “Gross Domestic Product (GDP)” and is used in the assessment of the GDP by taking into consideration the cost of natural resources and the environment, called “green GDP”. This study uses Life Cycle Assessment, which is a technique used to assess the environmental impact of sugar industry from raw materials, distribution, production, and waste management. The system boundary for the life cycle inventory are cultivation, planting, transportation and sugar production. The results of the green GDP and GDP is difference about 6–12% due to the depletion cost resulting from the use of natural resources between 9.0–9.52 $/ton of sugar production and the degradation cost caused by the airborne emission and waterborne emission between 37–57 $/ton of sugar production. The quantity of Total Suspended Particulate (TSP) generated from the sugar production process is the main causing the environmental cost about 55%. In order to solve environmental causes, the policy making as Circular Economy Strategies can be used to meet the sustainable development in the future.

Sugarcane Industrial Byproducts as Challenges to Environmental Safety and Their Remedies: A Review

Sugarcane (Saccharum officinarum) is one of the major crops cultivated in tropical and sub-tropical countries, and the primary purpose is to obtain raw sugar. It is an important substance for sugar and alcohol production by both the sugar and beverage industries. During cane processing, various byproducts are obtained, namely sugarcane bagasse, bagasse ash, pressmud cake, sugarcane vinasse, and spent wash. There are many challenging problems in storage, and they cause great environmental pollution. This review discusses their properties by which they can be used for cleaner agricultural and environmental sustainability. Utilization of byproducts results in value-added soil properties and crop yield. Replacing chemical fertilization with these organic natured byproducts not only minimizes the surplus usage of chemical fertilizers but is also cost-effective and an eco-friendly approach. The drawbacks of the long-term application of these byproducts in the agricultural ecosystem are not well documented. We conclude that the agriculture sector can dispose of sugar industry byproducts, but proper systematic disposal is needed. The need arises to arrange some seminars, meetings, and training to make the farming community aware of byproducts utilization and setting a friendly relationship between the farming community and industrialists.

Evaluation of enhanced production of cellulose deconstructing enzyme using natural and alkali pretreated sugar cane bagasse under the influence of graphene oxide

High production cost of cellulase enzyme is one of the main constraints in the practical implementation of biofuels at global scale. Therefore, the present investigation is focused to produce low-cost cellulase via sustainable strategies. This work evaluates to achieve enhanced fungal cellulase production using natural and pretreated sugar cane bagasse (SCB) via Rhizopus oryzae NS5 under the solid state fermentation (SSF) while implementing graphene oxide (GO) as a catalyst. A low alkali treatment showed better performance for cellulase production wherein 14 IU/gds FP activity is observed in 96 h using 0.5% alkali treated SCB, significantly higher as compared to 10 IU/gds FP in case of untreated SCB. Further, the effect of GO has been investigated on cellulase production, incubation temperature and pH of the production medium. Under the influence of 1.5% concentration of GO, alkali pretreated SCB produced maximum 25 IU/gds cellulase in 72 h at pH 5.0 and 40 °C.

High level xylitol production by Pichia fermentans using non-detoxified xylose-rich sugarcane bagasse and olive pits hydrolysates

Hemicellulosic sugars, the overlooked fraction of lignocellulosic residues can serve as potential and cost-effective raw material that can be exploited for xylitol production. Xylitol is a top platform chemical with applications in food and pharmaceutical industries. Sugarcane bagasse (SCB) and olive pits (OP) are the major waste streams from sugar and olive oil industries, respectively. The current study evaluated the potential of Pichia fermentans for manufacturing of xylitol from SCB and OP hydrolysates through co-fermentation strategy. The highest xylitol accumulation was noticed with a glucose and xylose ratio of 1:10 followed by feeding with xylose alone. The fed-batch cultivation using pure xylose, SCB, and OP hydrolysates, resulted in xylitol accumulation of 102.5, 86.6 and 71.9 g/L with conversion yield of 0.78, 0.75 and 0.74 g/g, respectively. The non-pathogenic behaviour and ability to accumulate high xylitol levels from agro-industrial residues demonstrates the potential of P. fermentans as microbial cell factory.

Enzymes, In Vivo Biocatalysis, and Metabolic Engineering for Enabling a Circular Economy and Sustainability

Since the industrial revolution, the rapid growth and development of global industries have depended largely upon the utilization of coal-derived chemicals, and more recently, the utilization of petroleum-based chemicals. These developments have followed a linear economy model (produce, consume, and dispose). As the world is facing a serious threat from the climate change crisis, a more sustainable solution for manufacturing, i.e., circular economy in which waste from the same or different industries can be used as feedstocks or resources for production offers an attractive industrial/business model. In nature, biological systems, i.e., microorganisms routinely use their enzymes and metabolic pathways to convert organic and inorganic wastes to synthesize biochemicals and energy required for their growth. Therefore, an understanding of how selected enzymes convert biobased feedstocks into special (bio)chemicals serves as an important basis from which to build on for applications in biocatalysis, metabolic engineering, and synthetic biology to enable biobased processes that are greener and cleaner for the environment. This review article highlights the current state of knowledge regarding the enzymatic reactions used in converting biobased wastes (lignocellulosic biomass, sugar, phenolic acid, triglyceride, fatty acid, and glycerol) and greenhouse gases (CO₂ and CH₄) into value-added products and discusses the current progress made in their metabolic engineering. The commercial aspects and life cycle assessment of products from enzymatic and metabolic engineering are also discussed. Continued development in the field of metabolic engineering would offer diversified solutions which are sustainable and renewable for manufacturing valuable chemicals.

Analyzing Barriers of Circular Food Supply Chains and Proposing Industry 4.0 Solutions

The concept of the circular economy (CE) has gained importance worldwide recently since it offers a wider perspective in terms of promoting sustainable production and consumption with limited resources. However, few studies have investigated the barriers to CE in circular food supply chains. Accordingly, this paper presents a systematic literature review of 136 papers from 2010 to 2020 from WOS and Scopus databases regarding these barriers to understand CE implementation in food supply chains. The barriers are classified under seven categories: “cultural”, “business and business finance”, “regulatory and governmental”, “technological”, “managerial”, “supply-chain management”, “knowledge and skills”. The findings show the need to identify barriers preventing the transition to CE. The findings also indicate that these challenges to CE can be overcome through Industry 4.0, which includes a variety of technologies, such as the Internet of Things (IoT), cloud technologies, machine learning, and blockchain. Specifically, machine learning can offer support by making workflows more efficient through the forecasting and analytical capabilities of food supply chains. Blockchain and big data analytics can provide the necessary support to establish legal systems and improve environmental regulations since transparency is a crucial issue for taxation and incentives systems. Thus, CE can be promoted via adequate laws, policies, and innovative technologies.

Bioactive Sugarcane Lipids in a Circular Economy Context

Most of the global sugar and ethanol supply trade comes from the harvesting of Saccharum officinarum (i.e., sugarcane). Its industrial processing results in numerous by-products and waste streams, such as tops, straw, filter cake, molasses and bagasse. The recovery of lipids (i.e., octacosanol, phytosterols, long-chain aldehydes and triterpenoids) from these residues is an excellent starting point for the development of new products for various application fields, such as health and well-being, representing an important feature of the circular economy. By selecting green scalable extraction procedures, industry can reduce its environmental impact. Refluxed ethanol extraction methods have been demonstrated to meet these characteristics. On the other hand, effective non-solvent methodologies such as molecular distillation and supercritical CO₂ extraction can fractionate lipids based on high temperature and pressure application with similar yields. Sugarcane lipophilic extracts are usually analyzed through gas chromatography (GC) and liquid chromatography (LC) techniques. In many cases, the identification of such compounds involves the development of high-temperature GC–MS/FID techniques. On the other hand, for the identification and quantification of thermolabile lipids, LC–MS techniques are suitable for the separation and identification of major lipid classes. Generically, its composition includes terpenes, phytosterols, tocopherol, free fatty acids, fatty alcohols, wax esters, triglycerides, diglycerides and monoglycerides. These compounds are already known for their interesting application in various fields such as pharma and cosmetics due to their anti-hypercholesterolemic, anti-hyperglycemic, antioxidant and anti-inflammatory properties.

Environmental, field and impurity factors to increase the agricultural performance of Brazilian and Australian sugarcane mills

This study aims to identify explanatory factors to increase the agricultural performance of Brazilian and Australian sugarcane mills. The relevance of Brazil and Australia for the sugar industry motivated the development this study based on the most important factors in both countries responsible for increasing the efficiency in sugarcane production. Thus, this study is designed to assess the hypothesis that there are a few explanatory variables that are deeply responsible for the agricultural efficiency in the sugar-energy sector. As a specific objective, it proposes a DEA (Data Envelopment Analysis) model that seeks to optimize the production of Total Recoverable Sugar (TRS) by planted area, and simultaneously, minimizes mineral and vegetable impurities. The sample consists of 82 observations from 32 sugarcane mills. An agricultural efficiency study was performed using the two-stage DEA, in which the evaluated mills according to the level of efficiency in the proposed model. Then, a Multiple Linear Regression Analysis was performed to identify the variables with the greatest influence on the performance of the mills in terms of efficiency. The results revealed six relevant variables for increasing the agricultural performance in the production of sugarcane: rainfall (mm weekly), chopped cane delivery (%), delivery time (h), borer (%), air humidity (%), and rods in raw wine (× 10⁵/mL). Finally, semi-structured interviews with Brazilian and Australian experts in the sugar-energy sector allowed the identification of five other relevant complementary factors that were unavailable in the database: genetic variety, agricultural cultivation activities, edaphoclimatic factors, renewal of sugarcane fields and irrigation system. The results of this study were grouped into the dimensions of environment, yield, and impurities, providing quantification and better understanding of the identified explanatory factors and the agricultural performance in terms of production efficiency, offering fundamental information that enables managers to make decisions and prioritize the aspects that contribute more significantly to the increase in agricultural productivity of the planted area.

Life cycle and economic assessment of sugarcane bagasse valorization to lactic acid

In this work, detailed life cycle assessment (LCA) and techno-economic analysis (TEA) of a novel lactic acid (LA) production process from sugarcane bagasse is performed, with the objective of identifying process improvement opportunities. Moreover, this is first such study in the Indian context. Experimental data generated at the Vasantdada Sugar Institute (VSI) for upstream processes is combined with ASPEN Plus simulation of the downstream steps for a commercial plant producing 104 tonnes per day of LA. Equipment sizing is performed and costing is done using standard approaches. OpenLCA is used to develop the LCA model and Ecoinvent database is used to quantify life cycle impacts for 1 kg of LA. Different scenarios for the LA plant are studied. Results showed that the pretreatment stage was crucial from both economic and environmental perspectives. The total life cycle climate change impact for production of 1 kg of lactic acid was 4.62 kg CO₂ eq. The product cost of LA was USD 2.9/kg, and a payback time of 6 years was achieved at a selling price of USD 3.21/kg. Scenario analysis has revealed that lactic acid plant annexed to a sugar mill led to significant environmental and economic benefits. Sensitivity analysis has identified opportunities to reduce the life cycle climate change impact to 2.29 kg CO₂ eq. and product cost to USD 1.42/kg through reduced alkali consumption, higher solid loading, and reduced enzyme loading.

Efficient bioconversion of sugarcane bagasse into polyhydroxybutyrate (PHB) by Lysinibacillus sp. and its characterization

In this study, Lysinibacillus sp. RGS was evaluated to synthesize polyhydroxybutyrate (PHB) from a broad range of pure carbon sources and residual sugars of chemically pretreated sugarcane bagasse (SCB) hydrolysates. Effects of supplementation of nutrients and various experimental variables to enhance PHB accumulation were investigated. Results of optimized parameters were identified as 48 h, 37 °C, pH 7; inoculums concentration (2.5% v/v) and shaking condition (100 rpm). Growth kinetics and bioprocess parameters of Lysinibacillus sp. using SCB hydrolysates with corn steep liquor (2%) accounted for the maximum cell growth (8.65 g/L) and PHA accumulation (61.5%) with PHB titer of (5.31 g/L) under optimal conditions. The produced biopolymer was studied by Fourier Transform Infrared (FTIR) spectroscopy and the results revealed the obtained to be PHB. Thus Lysinibaciluus sp. exhibits high potential in industrial scale manufacture of PHB using SCB as an inexpensive substrate.

Current developments and challenges of green technologies for the valorization of liquid, solid, and gaseous wastes from sugarcane ethanol production

The sugarcane industry is one of the largest in the world and processes huge volumes of biomass, especially for ethanol and sugar production. These processes also generate several environmentally harmful solid, liquid, and gaseous wastes. Part of these wastes is reused, but with low-added value technologies, while a large unused fraction continues to impact the environment. In this review, the classic waste reuse routes are outlined, and promising green and circular technologies that can positively impact this sector are discussed. To remain competitive and reduce its environmental impact, the sugarcane industry must embrace technologies for bagasse fractionation and pyrolysis, microalgae cultivation for both CO₂ recovery and vinasse treatment, CO₂ chemical fixation, energy generation through the anaerobic digestion of vinasse, and genetically improved fermentation yeast strains. Considering the technological maturity, the anaerobic digestion of vinasse emerges as an important solution in the short term. However, the greatest environmental opportunity is to use the pure CO₂ from fermentation. The other opportunities still require continued research to reach technological maturity. Intensifying the processes, the exploration of driving-change technologies, and the integration of wastes through biorefinery processes can lead to a more sustainable sugarcane processing industry.

A Local Ecosystem Assessment of the Potential for Net Negative Heavy-Duty Truck Greenhouse Gas Emissions through Biomethane Upcycling

Decarbonising heavy-duty trucks is challenging due to high journey power and energy requirements. With a growing fleet of commercial vehicles in the UK, biomethane can provide significant reductions in greenhouse gas (GHG) emissions compared to fossil diesel. Methane is a potent GHG with a global warming potential (GWP) of 23–36, therefore reducing levels in the atmosphere can have a significant impact on climate change. There are a range of anthropogenic sources of methane that could be collected and processed to provide sustainable energy (upcycled), e.g., agricultural waste and the waste water system. This paper explores the impact of using upcycled methane in transport in South East England, evaluating local sources of anthropogenic methane and the environmental and economic impact of its use for a heavy-duty truck compared to fossil and battery electric alternatives. Analysis concludes that the use of upcycled methane in transport can provide significant reductions in lifecycle GHG emissions compared to diesel, fossil natural gas or battery electric trucks, and give net negative GHG emissions where avoided environmental methane emissions are considered. Furthermore, upcycling solutions can offer a lower cost route to GHG reduction compared to electrification.