Ionic liquid based pretreatment of lignocellulosic biomass for enhanced bioconversion

Deep dewatering of sludge and resource recovery of hydroxyapatite: A recyclable approach via ionic liquid biphasic system and hydrogen bonds reformation

Deep dewatering of Waste Activated Sludge (WAS) through mechanical processes remains inefficient, primarily due to the formation of a stable hydrogen bonding network between the biopolymers and water, which consequently leads to significant water trapped by Extracellular Polymeric Substances (EPS). In this study, a novel and recyclable treatment for WAS based on Ionic Liquids (ILs) was established, named IL-biphasic aqueous system (IL-ABS) treatment. Specifically, the IL-ABS formed in WAS facilitated rapid and efficient in-situ deep dewatering while concurrently recovering hydroxyapatite. The water content decreased from an initial 98.27 % to 65.35 % with IL-ABS, formed by 1-Butyl-3-methylimidazolium bromide (BmimBr) and K3PO4 synthesized from waste H3PO4. Moreover, the recycled BmimBr maintaining the water content of the dewatered sludge consistently between 65.61 % and 67.25 % across five cycles, exhibited remarkable reproducibility. Through three-dimensional excitation-emission matrix, lactate dehydrogenase analyses and confocal laser scanning microscopy, the high concentration of BmimBr in the upper phase effectively disrupted the cells and EPS, which exposed protein and polysaccharide on the EPS surface. Subsequently, the K3PO4 in the lower phase led to an enhanced salting-out effect in WAS. Furthermore, FT-IR analysis revealed that K3PO4 disrupted the original hydrogen bonds between EPS and water. Then, BmimBr formed numerous hydrogen bonds with the sludge flocs, leading to deep dewatering and agglomeration of the sludge flocs during the unique phase separation process of IL-ABS. Notably, sludge-derived hydroxyapatite product exhibited remarkable adsorption capacity for prevalent heavy metal contaminants such as Pb2+, Cd2+ and Cu2+, with efficiencies comparable to those of commercial hydroxyapatite, thereby achieving the resource utilization of waste H3PO4. Moreover, economic calculations demonstrated the suitability of this novel treatment. This innovative treatment exhibits potential for practical applications in the non-mechanical deep dewatering of WAS.

Valorization of food waste: A comprehensive review of individual technologies for producing bio-based products

BACKGROUND

The escalating global concerns about food waste and the imperative need for sustainable practices have fuelled a burgeoning interest in the valorization of food waste. This comprehensive review delves into various technologies employed for converting food waste into valuable bio-based products. The article surveys individual technologies, ranging from traditional to cutting-edge methods, highlighting their respective mechanisms, advantages, and challenges.

SCOPE AND APPROACH

The exploration encompasses enzymatic processes, microbial fermentation, anaerobic digestion, and emerging technologies such as pyrolysis and hydrothermal processing. Each technology's efficacy in transforming food waste into bio-based products such as biofuels, enzymes, organic acids, prebiotics, and biopolymers is critically assessed. The review also considers the environmental and economic implications of these technologies, shedding light on their sustainability and scalability. The article discusses the role of technological integration and synergies in creating holistic approaches for maximizing the valorization potential of food waste. Key finding and conclusion: This review consolidates current knowledge on the valorization of food waste, offering a comprehensive understanding of individual technologies and their contributions to the sustainable production of bio-based products. The synthesis of information presented here aims to guide researchers, policymakers, and industry stakeholders in making informed decisions to address the global challenge of food waste while fostering a circular and eco-friendly economy.

Enhanced humification of full-scale apple wood and cow manure by promoting lignocellulose degradation via biomass pretreatments

Agroforestry waste and cow manure pollute the environment, of which, agroforestry waste is difficult to degrade. Compost is an effective way to dispose agroforestry waste; however, the low degradation efficiency of lignocellulose in agroforestry waste affects the process of composting humification. This study investigated lignocellulose degradation and composting humification in full-size apple wood and cow manure composting processes by applying different pretreatments (acidic, alkaline, and high-temperature) to apple wood. Simultaneously, physicochemical characterization and metagenome sequencing were combined to analyze the function of carbohydrate-active enzymes database (CAZy). Therefore, microbial communities and functions were linked during the composting process and the lignocellulose degradation mechanism was elaborated. The results showed that the addition of apple wood increased the compost humus (HS) yield, and pretreatment of apple wood enhanced the lignocellulose degradation during composting processes. In addition, pretreatment improved the physicochemical properties, such as temperature, pH, electric conductivity (EC), ammonium nitrogen (NH4+), and nitrate nitrogen (NO3-) in the compost, of which, acid treated apple wood compost (AcAWC) achieved the highest temperature of 58.4 °C, effectively promoting nitrification with NO3- ultimately reaching 0.127 g/kg. In all composts, microbial networks constructed a high proportion of positively correlated connections, and microorganisms promoted the composting process through cooperation. The proportions of glycosyltransferase (GT) and glycoside hydrolase (GH) promoted the separation and degradation of lignocellulose during composting to form HS. Notably, the adverse effects of the alkali-treated apple wood compost on bacteria were greater. AcAWC showed significant correlations between bacterial and fungal communities and both lignin and hemicellulose, and had more biomarkers associated with lignocellulose degradation and humification. The lignin degradation rate was 24.57 % and the HS yield increased by 27.49 %. Therefore, AcAWC has been confirmed to enhance lignocellulose degradation and promote compost humification by altering the properties of the apple wood and establishing a richer microbial community.

Mechanisms of Biological Effects of Ionic Liquids: From Single Cells to Multicellular Organisms

The review presents a detailed discussion of the evolving field studying interactions between ionic liquids (ILs) and biological systems. Originating from molten salt electrolytes to present multiapplication substances, ILs have found usage across various fields due to their exceptional physicochemical properties, including excellent tunability. However, their interactions with biological systems and potential influence on living organisms remain largely unexplored. This review examines the cytotoxic effects of ILs on cell cultures, biomolecules, and vertebrate and invertebrate organisms. Our understanding of IL toxicity, while growing in recent years, is yet nascent. The established findings include correlations between harmful effects of ILs and their ability to disturb cellular membranes, their potential to trigger oxidative stress in cells, and their ability to cause cell death via apoptosis. Future research directions proposed in the review include studying the distribution of various ILs within cellular compartments and organelles, investigating metabolic transformations of ILs in cells and organisms, detailed analysis of IL effects on proteins involved in oxidative stress and apoptosis, correlation studies between IL doses, exposure times and resulting adverse effects, and examination of effects of subtoxic concentrations of ILs on various biological objects. This review aims to serve as a critical analysis of the current body of knowledge on IL-related toxicity mechanisms. Furthermore, it can guide researchers toward the design of less toxic ILs and the informed use of ILs in drug development and medicine.

Recent Progress on Conversion of Lignocellulosic Biomass by MOF-Immobilized Enzyme

The enzyme catalysis conversion of lignocellulosic biomass into valuable chemicals and fuels showed a bright outlook for replacing fossil resources. However, the high cost and easy deactivation of free enzymes restrict the conversion process. Immobilization of enzymes in metal-organic frameworks (MOFs) is one of the most promising strategies due to MOF materials' tunable building units, multiple pore structures, and excellent biocompatibility. Also, MOFs are ideal support materials and could enhance the stability and reusability of enzymes. In this paper, recent progress on the conversion of cellulose, hemicellulose, and lignin by MOF-immobilized enzymes is extensively reviewed. This paper focuses on the immobilized enzyme performances and enzymatic mechanism. Finally, the challenges of the conversion of lignocellulosic biomass by MOF-immobilized enzyme are discussed.

Hybrid conditioning of ionic liquid coupling with H2SO4 to improve the dewatering performance of municipal sludge

Municipal sludge generated from wastewater treatment plants can cause a serious environmental and economic burden. A novel hybrid conditioning strategy was developed to enhance the dewatering performance of sludge, employing 1-butyl-3-methylimidazolium trifluoromethanesulfonate ([C4mim][CF3SO3]) treatment combined with H2SO4 acidification. Following conditioning, the capillary suction time ( CST normalized ), the specific resistance of filtration (SRF), and moisture content of the treated sludge were decreased to 1.99 ± 0.24 (s·L/g TSS), 1.33 ± 0.05 (1012 m/kg), and 72.01 ± 0.94%, respectively. The results were superior to those achieved with sludge treated solely by H2SO4 acidification or [C4mim][CF3SO3] alone. The biomacromolecules within the sludge flocs were dissolved by [C4mim][CF3SO3], while simultaneously, the microorganisms were inactivated. Consequently, the colloidal-like structures of the sludge flocs were destroyed. Additionally, the ionizable functional groups of the biomacromolecules were instantly protonated by the introduced H+ ions, and their negative charges were neutralized during the H2SO4 acidification process. The presence of H+ ions promoted the weakening of electrostatic repulsion between the sludge flocs. As a result, an enhancement of sludge dewaterability was obtained after treatment with [C4mim][CF3SO3] and H2SO4 acidification. The finding of the intensification mechanism of sludge dewaterability brought by hybrid treatment of acidification and [C4mim][CF3SO3] provides novel insights into the field of sludge disposal.

Sustainable utilization of fruit and vegetable waste bioresources for bioplastics production

Nowadays, rapidly increasing production, use and disposable of plastic products has become one of the utmost environmental issues. Our current circumstances in which the food supply chain is demonstrated as containing plastic particles and other plastic-based impurities, represents a significant health risk to humans, animals, and environmental alike. According to this point of view, biodegradable plastic material aims to produce a more sustainable and greener world with a lower ecological impact. Bioplastics are being investigated as an environmentally friendly candidate to address this problem and hence global bioplastic production has seen significant growth and expansion in recent years. This article focuses on a few critical issues that must be addressed for bioplastic production to become commercially viable. Although the reduction of fruit and vegetable waste biomass has an apparent value in terms of environmental benefits and sustainability, commercial success at industrial scale has remained flat. This is due to various factors, including biomass feedstocks, pretreatment technologies, enzymatic hydrolysis, and scale-up issues in the industry, all of which contribute to high capital and operating costs. This review paper summarizes the global overview of bioplastics derived from fruit and vegetable waste biomass. Furthermore, economic and technical challenges associated with industrialization and diverse applications of bioplastics in biomedical, agricultural, and food-packaging fields due to their excellent biocompatibility properties are reviewed.HighlightsReview of the diverse types and characteristics of sustainability of biobased plasticsImproved pretreatment technologies can develop to enhance greater yieldEnzyme hydrolysis process used for bioplastic extraction & hasten industrial scale-upFocus on technical challenges facing commercialized the bioplasticsDetailed discussion on the application for sustainability of biodegradable plastics.

Process Simulation and Optimization on Ionic Liquids

Ionic liquids (ILs) are promising alternative compounds that enable the development of technologies based on their unique properties as solvents or catalysts. These technologies require integrated product and process designs to select ILs with optimal process performances at an industrial scale to promote cost-effective and sustainable technologies. The digital era and multiscale research methodologies have changed the paradigm from experiment-oriented to hybrid experimental-computational developments guided by process engineering. This Review summarizes the relevant contributions (>300 research papers) of process simulations to advance IL-based technology developments by guiding experimental research efforts and enhancing industrial transferability. Robust simulation methodologies, mostly based on predictive COSMO-SAC/RS and UNIFAC models in Aspen Plus software, were applied to analyze key IL applications: physical and chemical CO2 capture, CO2 conversion, gas separation, liquid-liquid extraction, extractive distillation, refrigeration cycles, and biorefinery. The contributions concern the IL selection criteria, operational unit design, equipment sizing, technoeconomic and environmental analyses, and process optimization to promote the competitiveness of the proposed IL-based technologies. Process simulation revealed that multiscale research strategies enable advancement in the technological development of IL applications by focusing research efforts to overcome the limitations and exploit the excellent properties of ILs.

Biotechnological innovations in nanocellulose production from waste biomass with a focus on pineapple waste

New materials' synthesis and utilization have shown many critical challenges in healthcare and other industrial sectors as most of these materials are directly or indirectly developed from fossil fuel resources. Environmental regulations and sustainability concepts have promoted the use of natural compounds with unique structures and properties that can be biodegradable, biocompatible, and eco-friendly. In this context, nanocellulose (NC) utility in different sectors and industries is reported due to their unique properties including biocompatibility and antimicrobial characteristics. The bacterial nanocellulose (BNC)-based materials have been synthesized by bacterial cells and extracted from plant waste materials including pineapple plant waste biomass. These materials have been utilized in the form of nanofibers and nanocrystals. These materials are found to have excellent surface properties, low density, and good transparency, and are rich in hydroxyl groups for their modifications to other useful products. These materials are well utilized in different sectors including biomedical or health care centres, nanocomposite materials, supercapacitors, and polymer matrix production. This review explores different approaches for NC production from pineapple waste residues using biotechnological interventions, approaches for their modification, and wider applications in different sectors. Recent technological developments in NC production by enzymatic treatment are critically discussed. The utilization of pineapple waste-derived NC from a bioeconomic perspective is summarized in the paper. The chemical composition and properties of nanocellulose extracted from pineapple waste may have unique characteristics compared to other sources. Pineapple waste for nanocellulose production aligns with the principles of sustainability, waste reduction, and innovation, making it a promising and novel approach in the field of nanocellulose materials.

Viscosity of Ionic Liquids: Theories and Models

Ionic liquids (ILs) offer a wide range of promising applications due to their unique and designable properties compared to conventional solvents. Further development and application of ILs require correlating/predicting their pressure-viscosity-temperature behavior. In this review, we firstly introduce methods for calculation of thermodynamic inputs of viscosity models. Next, we introduce theories, theoretical and semi-empirical models coupling various theories with EoSs or activity coefficient models, and empirical and phenomenological models for viscosity of pure ILs and IL-related mixtures. Our modelling description is followed immediately by model application and performance. Then, we propose simple predictive equations for viscosity of IL-related mixtures and systematically compare performances of the above-mentioned theories and models. In concluding remarks, we recommend robust predictive models for viscosity at atmospheric pressure as well as proper and consistent theories and models for P-η-T behavior. The work that still remains to be done to obtain the desired theories and models for viscosity of ILs and IL-related mixtures is also presented. The present review is structured from pure ILs to IL-related mixtures and aims to summarize and quantitatively discuss the recent advances in theoretical and empirical modelling of viscosity of ILs and IL-related mixtures.

Characterization of sugarcane mutants developed through gamma irradiations for their lignin content and caffeic acid-O-methyl transferase (COMT) gene mutations

PURPOSE

Bagasse, the residue left after extracting juice from sugarcane stalks, is rich in lignocellulosic biomass. The lignin present in this plant biomass is the key factor that hinders the efficient extraction of ethanol from the bagasse. In the current study, γ-irradiated sugarcane mutants were evaluated for variation in lignin content and its corresponding caffeic acid-O-methyl transferase (COMT) gene.

MATERIALS AND METHODS

The acetyl bromide method was used to estimate lignin content in sugarcane mutants. PCR-based cloning of the COMT gene was performed in low lignin mutants as well as control plants in E. coli (strain DH5α) to understand the mechanism of variation at the molecular level. The Sanger sequencing for cloned gene was performed to check variation in gene sequence.

RESULTS

In comparison to the control (21.5%), the mutant plants' lignin content ranged from 13 to 28%. The Sanger sequencing revealed approximately the same length of the gene from mutants as well as a control plant. In comparison to the reference gene, the mutated gene showed SNPs and indels in different regions, which may have an impact on lignin content.

CONCLUSIONS

Therefore, γ-irradiated mutagenesis is an acceptable approach to develop novel mutants of sugarcane with low lignin content to enhance bioethanol production from waste material using bioprocess technology.

Lignin Extraction by Using Two-Step Fractionation: A Review

Lignocellulosic biomass represents the most abundant renewable carbon source on earth and is already used for energy and biofuel production. The pivotal step in the conversion process involving lignocellulosic biomass is pretreatment, which aims to disrupt the lignocellulose matrix. For effective pretreatment, a comprehensive understanding of the intricate structure of lignocellulose and its compositional properties during component disintegration and subsequent conversion is essential. The presence of lignin-carbohydrate complexes and covalent interactions between them within the lignocellulosic matrix confers a distinctively labile nature to hemicellulose. Meanwhile, the recalcitrant characteristics of lignin pose challenges in the fractionation process, particularly during delignification. Delignification is a critical step that directly impacts the purity of lignin and facilitates the breakdown of bonds involving lignin and lignin-carbohydrate complexes surrounding cellulose. This article discusses a two-step fractionation approach for efficient lignin extraction, providing viable paths for lignin-based valorization described in the literature. This approach allows for the creation of individual process streams for each component, tailored to extract their corresponding compounds.

Energy Applications of Ionic Liquids: Recent Developments and Future Prospects

Ionic liquids (ILs) consisting entirely of ions exhibit many fascinating and tunable properties, making them promising functional materials for a large number of energy-related applications. For example, ILs have been employed as electrolytes for electrochemical energy storage and conversion, as heat transfer fluids and phase-change materials for thermal energy transfer and storage, as solvents and/or catalysts for CO2 capture, CO2 conversion, biomass treatment and biofuel extraction, and as high-energy propellants for aerospace applications. This paper provides an extensive overview on the various energy applications of ILs and offers some thinking and viewpoints on the current challenges and emerging opportunities in each area. The basic fundamentals (structures and properties) of ILs are first introduced. Then, motivations and successful applications of ILs in the energy field are concisely outlined. Later, a detailed review of recent representative works in each area is provided. For each application, the role of ILs and their associated benefits are elaborated. Research trends and insights into the selection of ILs to achieve improved performance are analyzed as well. Challenges and future opportunities are pointed out before the paper is concluded.

Sustainable ionic liquids-based molecular platforms for designing acetylcholinesterase reactivators

We report a green chemistry approach for preparation of oxime-functionalized ILs as AChE reactivators: amide/ester linked IL, l-alanine, and l-phenylalanine derived salts bearing pyridinium aldoxime moiety. The reactivation capacities of the novel oximes were evaluated towards AChE inhibited by typical toxic organophosphates, sarin (GB), VX, and paraoxon (PON). The studied compounds are mostly non-toxic up to the highest concentrations screened (2 mM) towards Gram-negative and Gram-positive bacteria cell lines and both filamentous fungi and yeasts in the in vitro screening experiments as well as towards the eukaryotic cell (CHO-K1 cell line). Introduction of the oxime moiety in initially biodegradable structure decreases its ability to biodegradation. The compound 3d was shown to reveal remarkable activity against the AChE inhibited by VX, exceeding conventional reactivators 2-PAM and obidoxime. The regularities on antidotal activity, cell viability, plasma stability, biodegradability as well as molecular docking study of the newly synthesized oximes will be used for further improvement of their structures.

Green chemical and hybrid enzymatic pretreatments for lignocellulosic biorefineries: Mechanism and challenges

The greener chemical and enzymatic pretreatments for lignocellulosic biomasses are portraying a crucial role owing to their recalcitrant nature. Traditional pretreatments lead to partial degradation of lignin and hemicellulose moieties from the pretreated biomass. But it still restricts the enzyme accessibility for the digestibility towards the celluloses and the interaction of lignin-enzymes, nonproductively. Moreover, incursion of certain special chemical treatments and other lignin sulfonation techniques to the enzymatic pretreatment (hybrid enzymatic pretreatment) enhances the lignin structural modification, solubilization of the hemicelluloses and both saccharification and fermentation processes (SAF). This article concentrates on recent developments in various chemical and hybrid enzymatic pretreatments on biomass materials with their mode of activities. Furthermore, the issues on strategies of the existing pretreatments towards their industrial applications are highlighted, which could lead to innovative ideas to overcome the challenges and give guideline for the researchers towards the lignocellulosic biorefineries.

Elucidating the Ionic Liquid-Induced Mixed Inhibition of GH1 β-Glucosidase H0HC94

Deciphering the ionic liquid (IL) tolerance of glycoside hydrolases (GHs) to improve their hydrolysis efficiency for fermentable sugar synthesis in the "one-pot" process has long been a hurdle for researchers. In this work, we employed experimental and theoretical approaches to investigate the 1-ethyl-3-methylimidazolium acetate ([C2C1im][MeCO2])-induced inhibition of GH1 β-glucosidase (H0HC94) from Agrobacterium tumefaciens 5A. At 10-15% [C2C1im][MeCO2] concentration, H0HC94 experiences competitive inhibition (R2 = 0.97, alpha = 2.8). As the IL content increased to 20-25%, the inhibition pattern shifted to mixed-type inhibition (R2 = 0.98, alpha = 3.4). These findings were further confirmed through characteristic inhibition plots using Lineweaver-Burk plots. Atomistic molecular dynamics simulations conducted with 0% [C2C1im][MeCO2], 10% [C2C1im][MeCO2], and 25% [C2C1im][MeCO2] revealed the accumulation of [C2C1im]+ at the negatively charged active site of H0HC94 in 10% [C2C1im][MeCO2], supporting the occurrence of competitive inhibition at lower IL concentrations. At higher IL concentrations, the cations and anions bound to the secondary binding sites (SBSs) of H0HC94, leading to a tertiary conformational change, as captured by the principal component analysis based on the free-energy landscape and protein structure networks. The altered conformation of H0HC94 affected the interaction with [C2C1im][MeCO2], which could possibly shift the inhibition from competitive to more mixed-type (competitive + noncompetitive) inhibition, as observed in the experiments. For the first time, we report a combined experimental and theoretical insight behind the mixed inhibition of a GH1 β-glucosidase. Our findings indicated the role of SBS in IL-induced inhibition, which could aid in developing more IL-tolerant β-glucosidases for biorefinery applications.

Application of machine learning techniques to the modeling of solubility of sugar alcohols in ionic liquids

The current trend of chemical industries demands green processing, in particular with employing natural substances such as sugar-derived compounds. This matter has encouraged academic and industrial sections to seek new alternatives for extracting these materials. Ionic liquids (ILs) are currently paving the way for efficient extraction processes. To this end, accurate estimation of solubility data is of great importance. This study relies on machine learning methods for modeling the solubility data of sugar alcohols (SAs) in ILs. An initial relevancy analysis approved that the SA-IL equilibrium governs by the temperature, density and molecular weight of ILs, as well as the molecular weight, fusion temperature, and fusion enthalpy of SAs. Also, temperature and fusion temperature have the strongest influence on the SAs solubility in ILs. The performance of artificial neural networks (ANNs), least-squares support vector regression (LSSVR), and adaptive neuro-fuzzy inference systems (ANFIS) to predict SA solubility in ILs were compared utilizing a large databank (647 data points of 19 SAs and 21 ILs). Among the investigated models, ANFIS offered the best accuracy with an average absolute relative deviation (AARD%) of 7.43% and a coefficient of determination (R²) of 0.98359. The best performance of the ANFIS model was obtained with a cluster center radius of 0.435 when trained with 85% of the databank. Further analyses of the ANFIS model based on the leverage method revealed that this model is reliable enough due to its high level of coverage and wide range of applicability. Accordingly, this model can be effectively utilized in modeling the solubilities of SAs in ILs.

Ionic liquid recovery and recycling via electrodialysis in biomass processing: An economical assessment

Extravagant price and lack of high-efficiency recovery technology limited scale-up utilization of ionic liquids. Ionic liquids recovery with electrodialysis-based techniques has caught wide concern due to membrane-based characteristic. Economical assessment for electrodialysis-based ionic liquid recovery and recycling in biomass processing was performed by determining influence of equipment-related and financial-related factors with sensitivity analysis for each factor. Overall recovery cost of 1-ethyl-3-methylimidazolium acetate, choline acetate, 1-butyl-3-methylimidazolium hydrogen sulphate and 1-ethyl-3-methylimidazolium hydrogen sulfate varied within 0.75-1.96 $/Kg, 0.99-3.00 $/Kg, 1.37-2.74 $/Kg and 1.15-2.89 $/Kg when factors changed within investigated range. Fold of membrane cost, factor of membrane stack cost, factor of auxiliary equipment cost, factor of annual maintenance cost and annual interest rate of loan were positively related with recovery cost. While percentage of annual elapsed time and loan period were negatively correlated with recovery cost. Economical assessment confirmed economic efficiency of electrodialysis for ionic liquids recovery and recycling in biomass processing.

Sustainable Phenylalanine-Derived SAILs for Solubilization of Polycyclic Aromatic Hydrocarbons

The solubilization capacity of a series of sustainable phenylalanine-derived surface-active ionic liquids (SAILs) was evaluated towards polycyclic aromatic hydrocarbons-naphthalene, anthracene and pyrene. The key physico-chemical parameters of the studied systems (critical micelle concentration, spectral properties, solubilization parameters) were determined, analyzed and compared with conventional cationic surfactant, CTABr. For all studied PAH solubilization capacity increases with extension of alkyl chain length of PyPheOC_n SAILs reaching the values comparable to CTABr for SAILs with n = 10-12. A remarkable advantage of the phenylalanine-derived SAILs PyPheOC_n and PyPheNHC_n is a possibility to cleave enzymatically ester and/or amide bonds under mild conditions, to separate polycyclic aromatic hydrocarbons in situ. A series of immobilized enzymes was tested to determine the most suitable candidates for tunable decomposition of SAILs. The decomposition pathway could be adjusted depending on the choice of the enzyme system, reaction conditions, and selection of SAILs type. The evaluated systems can provide selective cleavage of the ester and amide bond and help to choose the optimal decomposition method of SAILs for enzymatic recycling of SAILs transformation products or as a pretreatment towards biological mineralization. The concept of a possible practical application of studied systems for PAHs solubilization/separation was also discussed focusing on sustainability and a green chemistry approach.

A novel insight on the intensification mechanism of sludge dewaterability by ionic liquids

The huge output of sewage sludge has caused a remarkable environmental burden. Sludge dewatering is considered as an important way to reduce the sludge volume. Five imidazole-based ionic liquids were used to improve the dewaterability of sewage sludge. 1-ethyl-3-methylimidazolium dihydrogen phosphate ([Emim][H₂PO₄]) was screened out as a potential conditioner of sludge due to its excellent dewatering performance and reusability. The solid content of sludge filter cake after treatment with [Emim][H₂PO₄] was about 10% higher than that of sludge treated by cationic polyacrylamides (CPAM). The intensification mechanism of ionic liquids to the improvement of sludge dewatering performance was studied. The presence of acidic ionic liquids [Emim][H₂PO₄] resulted the increase of zeta potential from -14.57 ± 0.81 mV to -5.60 ± 0.30 mV and led to the protonation of biopolymers. Acidic ionic liquids [Emim][H₂PO₄] inactivated the microorganism and led to a porous and unconsolidated structure of the solid sludge particles. All these effects were conducive to destroy the microstructure of sludge and release water. However, [Emim]Cl, [Bmim][OTf] and [Hmim][OTf] showed little effect on the protonation of ionizable functional groups at near-neutral environment. The dissolution of biopolymer decreased the zeta potential and strengthened the electrostatic repulsion. So, they showed weaker intensification effects than CPAM.

Techno-economic analysis of ionic liquid pre-treatment integrated pyrolysis of biomass for co-production of furfural and levoglucosenone

In the current work, a techno-economic analysis of pyrolysis of choline glycinate pre-treated biomass has been presented for the co-production of furfural and levoglucosenone along with hemicellulose, lignin and biochar as other byproducts. The mass balance suggested that the 1800 kg/h dry sugarcane straw biorefinery plant could produce about 260 kg/h furfural and 65 kg/h levoglucosenone. The minimum selling price of furfural and levoglucosenone were also estimated and the values were 1640 and 3590 AU$/tonne at 11.1 % biomass loading with 99 % ionic liquid recycling for furfural and levoglucosenone as the target products, respectively. The base case analysis suggested around 6.9 MAU$ NPV with a payback period of 15.4 years. The sensitivity analysis suggested that biomass loading, ionic liquid recycling and cost, waste heat recovery, furfural yield, interest rate and capital cost are the major influential factors for both the minimum selling price of furfural and levoglucosenone.

Treatment of Pulp Black Liquor with an Ionic Liquid: Modeling and Optimization by Using Response Surface Methodology and Central Composite Design

In this study, selective extraction towards ionic liquid trihexyltetradecylphosphonium chloride ([P₆₆₆₁₄ ]Cl) of lignin residues, polysaccharides and organic acids present in black liquor (BL), the main principal wastewater of pulping industry was studied. With the objective of finding optimized conditions allowing to extract lignin residues while polysaccharides and organic acids remain in aqueous solution, a design of experiments approach based on a response surface methodology was used. Three continuous factors, namely initial pH varying from 9 to 13.5, dilution of BL varying from 5 to 20 and volumetric ratio of black liquor vs. ionic liquid R_V ., varying from 1 to 19, were investigated. Concentration of lignin residues, polysaccharides and organic acids were measured using Folin-Ciocalteu method, the anthrone method and HPLC, respectively. Results showed that a multi-response optimization led to the extraction of 84.8 % of lignin residues, 66.0 % of polysaccharides, and no extraction of OA under optimised conditions.

Evaluation of oxy-organosolv pretreatment on lignin extraction from wheat straw

To develop a characteristic "Lignin-first" strategy, the oxy-organosolv delignification processes under mild conditions were comprehensively investigated. Results showed that lignin yield could achieve about 50 % under the optimum process conditions of ethanol concentration 80 %, temperature 90 °C, liquid to wheat straw ratio 25:1 for powdery-scale substrates, which was 65.0 % higher than that for rod-scale substrates under the same conditions. The lignin structural and carbohydrate component results demonstrated the employment of oxygen induced great quantities of lignin dissolving out on the premise of little carbohydrate component (<1 %) and lignin structural (mainly β-O-4 units) changes. Moreover, based on the molecular weight and polydiversity comparison results, the aqueous oxygen could transfer homogeneously in mild organosolv system and result in lignin degradation uniformly. Besides, the employment of oxygen assisted in not only extending the massive lignin removal stage to 30 min and 50 min for P-OEEL and R-OEEL respectively, but also boost the delignification rate with comparison to P-EL and R-EL. Lastly, the excellent anti-oxidant properties of lignin from oxy-organosolv process were demonstrated by scavenging DPPH and ABTS radicals. The economic calculations showed that the cost for lignin production were about 1.58USD/g lignin from powdery-scale wheat straw, providing a competitive route for high-value utilize waste biomass.

Bioconversion of corn fiber to bioethanol: Status and perspectives

Due to the rising demand for green energy, bioethanol has attracted increasing attention from academia and industry. Limited by the bottleneck of bioethanol yield in traditional corn starch dry milling processes, an increasing number of studies focus on fully utilizing all corn ingredients, especially kernel fiber, to further improve the bioethanol yield. This mini-review addresses the technological challenges and opportunities on the way to achieving the efficient conversion of corn fiber. Significant advances during the review period include the detailed characterization of different forms of corn kernel fiber and the development of off-line and in-situ conversion strategies. Lessons from cellulosic ethanol technologies offer new ways to utilize corn fiber in traditional processes. However, the commercialization of corn kernel fiber conversion may be hampered by enzyme cost, conversion efficiency, and overall process economics. Thus, future studies should address these technical limitations.

Challenges in Using Ionic Liquids for Cellulosic Ethanol Production

The growing need to expand the use of renewable energy sources in a sustainable manner, providing greater energy supply security and reducing the environmental impacts associated with fossil fuels, finds in the agricultural by-product bioethanol an economically viable alternative with significant expansion potential. In this regard, a dramatic boost in the efficiency of processes already in place is required, reducing costs, industrial waste, and our carbon footprint. Biofuels are one of the most promising alternatives to massively produce energy sustainably in a short-term period. Lignocellulosic biomass (LCB) is highly recalcitrant, and an effective pretreatment strategy should also minimize carbohydrate degradation by diminishing enzyme inhibitors and other products that are toxic to fermenting microorganisms. Ionic liquids (ILs) have been playing an important role in achieving cleaner processes as a result of their excellent physicochemical properties and outstanding performance in the dissolution and fractionation of lignocellulose. This review provides an analysis of recent advances in the production process of biofuels from LCB using ILs as pretreatment and highlighting techniques for optimizing and reducing process costs that should help to develop robust LCB conversion processes.

Lignocellulosic biomass conversion via greener pretreatment methods towards biorefinery applications

Lignocellulose biomass during pretreatment releases various compounds, among them the most important is reducing sugars, which can be utilized for the production of biofuels and some other products. Thereby, innovative greener pretreatment techniques for lignocellulosic materials have been considered to open a new door in the aspects of digestibility of the rigid carbohydrate-lignin matrix to reduce the particle size and remove hemicellulose/lignin contents to successfully yield valid bioproducts. This article reviews about the composition of lignocelluloses and emphasizes various green pretreatments viz novel green solvent-based IL and DES steam explosion, supercritical carbon dioxide explosion (Sc-CO2) and co-solvent enhanced lignocellulosic fractionation (CELF) along with suitable mechanistic pathway of LCB pretreatment process. Finally, this article concludes that the existing pretreatments should be redesigned to conquer the demands by large scale production and suggests combined pretreatment methods to carry out various biomass pre-processing.

Impact of nanomaterials on sustainable pretreatment of lignocellulosic biomass for biofuels production: An advanced approach

Biomass to biofuels production technology appears to be one of the most sustainable strategies among various renewable energy resources. Herein, pretreatment is an unavoidable and key step to increase free cellulose availability and digestibility to produce green fuels. Various existing pretreatment technologies of lignocellulosics biomasses (LCBs) face distinct challenges e.g., energy consuming, cost intensive, may lead partial removal of lignin, complex inhibitors production as well as may cause environmental pollutions. These, limitations may be overcome with the application of nanomaterials, employed as nanocatalysts during the pretreatment process of LCBs. In this prospect, the present review focuses and summarizes results of numerous studies and exploring the utilizations of magnetic, carbon based nanostructure, and nanophotocatalysts mediated pretreatment processes along with their possible mechanisms to improve the biofuels production compared to conventional chemical based pretreatment approaches. Furthermore, different aspects of nanomaterials based pretreatment methods with their shortcomings and future prospects have been discussed.

Challenges and perspectives of green-like lignocellulose pretreatments selectable for low-cost biofuels and high-value bioproduction

Lignocellulose represents the most abundant carbon-capturing substance that is convertible for biofuels and bioproduction. Although biomass pretreatments have been broadly applied to reduce lignocellulose recalcitrance for enhanced enzymatic saccharification, they mostly require strong conditions with potential secondary waste release. By classifying all major types of pretreatments that have been recently conducted with different sources of lignocellulose substrates, this study sorted out their distinct roles for wall polymer extraction and destruction, leading to the optimal pretreatments evaluated for cost-effective biomass enzymatic saccharification to maximize biofuel production. Notably, all undigestible lignocellulose residues are also aimed for effective conversion into value-added bioproduction. Meanwhile, desired pretreatments were proposed for the generation of highly-valuable nanomaterials such as cellulose nanocrystals, lignin nanoparticles, functional wood, carbon dots, porous and graphitic nanocarbons. Therefore, this article has proposed a novel strategy that integrates cost-effective and green-like pretreatments with desirable lignocellulose substrates for a full lignocellulose utilization with zero-biomass-waste liberation.

Advances in machine learning for high value-added applications of lignocellulosic biomass

Lignocellulose can be converted into biofuel or functional materials to achieve high value-added utilization. Biomass utilization process is complex and multi-dimensional. This paper focuses on the biomass conversion reaction conditions, the preparation of biomass-based functional materials, the combination of biomass conversion and traditional wet chemistry, molecular simulation and process simulation. This paper analyzes the mechanism, advantages and disadvantages of important machine learning (ML) methods. The application examples of ML in different aspects of high value utilization of lignocellulose are summarized in detail. The challenges and future prospects of ML in this field are analyzed.

Second Generation Bioethanol Production from Soybean Hulls Pretreated with Imidazole as a New Solvent

Soybean hulls (SH) are the main industrial waste from soybean processing, representing 5–8% of the whole grain. Imidazole was employed for the hydrothermal pretreatment of SH and further bioethanol production. Different pretreatment temperatures (120 and 180 °C) and times (1 and 3 h) were tested. Lignin removal and glucose yield were significantly influenced by temperature. After 48 h of enzymatic hydrolysis of imidazole-treated SH (120 °C, 1 h), 32.7 g/L of glucose and 9.4 g/L of xylose were obtained. A maximum bioethanol yield of 78.9% was reached after 12 h of fermentation by Saccharomyces cerevisiae using SH enzymatic hydrolysate. Imidazole appears to be a potential alternative to pretreat lignocellulosic wastes such as SH for the production of second-generation biofuels and other biomolecules.

Review of chemical pretreatment of lignocellulosic biomass using low-liquid and low-chemical catalysts for effective bioconversion

Chemical pretreatment of lignocellulosic biomass (LCB) is essential for effective biological conversion in subsequent steps to produce biofuels or biochemicals. For effective pretreatment, high lignin content and its recalcitrant nature of LCB are major factors influencing bioconversion, especially lignin is known to be effectively solubilized by alkaline, organic, and deep eutectic solvents, ionic liquids, while hemicellulose is effectively dissolved by various acid catalysts and organic solvents. Depending on the pretreatment method/catalyst used, different pretreatment process scheme should be applied with different amounts of catalyst and water inputs to achieve a satisfactory effect. In addition, the amount of processing water required in the following processes such as washing, catalyst recovery, and conditioning after pretreatment is critical factor for scale-up (commercialization). In this review, the amount of catalyst and/or water used, and the effect of pretreatment, properties of the products, and recovery of liquid are also discussed.

One pot bioprocessing in lignocellulosic biorefinery: A review

Practically, high-yield conversion of biomass into value-added products at low cost is a primary goal for any lignocellulosic refinery. In the industrial context, the limitation in the practical adaptation of the conventional techniques practically involves multiple reactors for the conversion of biomass to bioproducts. Therefore, the present manuscript critically reviewed the advancements in one-pot reaction systems with a major focus on the scientific production of value-added products from lignocellulosic biomass. In view of that, the novelty of one-pot reactions is shown during the fractionation of biomass into their individual constituents. The importance of the direct conversion of cellulose and lignin into a range of valuable products including organic acids and platform chemicals are separately discussed. Finally, the article is concluded with the opportunities, existing troubles, and possible solutions to overcome the challenges in lignocellulosic biorefinery. This article will assist the readers to identify the economic-friendly-one-pot conversion of lignocellulosic biomass.

A review on strategies to reduce ionic liquid pretreatment costs for biofuel production

Worldwide demand for renewable energy has promoted the considerable exploration of biofuel production from lignocellulosic biomass. Ionic liquid pretreatment is of great interest to render biomass amenable for biofuel production, however, its unaffordable cost stimulates significant attention to the feasibility of commercialization. This review aims to compile the latest advances with respect to reducing production costs for ionic liquids-based biorefineries. Protic ionic liquids offer relatively low synthesis costs, but excessive antisolvent washing of the pretreated biomass is often inevitable. Recovering ionic liquids requires several separation and purification steps, and the reuse of ionic liquids could significantly lose functionality due to the degradation. It is promising to screen ionic liquids-tolerant enzymes and strains for one-pot saccharification and fermentation without solid-liquid separation, however, there is still a need for subsequent recovery of ionic liquids. Additionally, technoeconomic analysis and life cycle assessment are highly recommended to evaluate the economic and environmental impacts.

Lignocellulose biohydrogen towards net zero emission: A review on recent developments

This review mainly determines novel and advance physical, chemical, physico-chemical, microbiological and nanotechnology-based pretreatment techniques in lignocellulosic biomass pretreatment for bio-H2 production. Further, aim of this review is to gain the knowledge on the lignocellulosic biomass pretreatment and its priority on the efficacy of bio-H2 and positive findings. The influence of various pretreatment techniques on the structure of lignocellulosic biomass have presented with the pros and cons, especially about the cellulose digestibility and the interference by generation of inhibitory compounds in the bio-enzymatic technique as such compounds is toxic. The result implies that the stepwise pretreatment technique only can ensure eventually the lignocellulosic biomass materials fermentation to yield bio-H2. Though, the mentioned pretreatment steps are still a challenge to procure cost-effective large-scale conversion of lignocellulosic biomass into fermentable sugars along with low inhibitory concentration.

A review on lignin pyrolysis: pyrolytic behavior, mechanism, and relevant upgrading for improving process efficiency

Lignin is a promising alternative to traditional fossil resources for producing biofuels due to its aromaticity and renewability. Pyrolysis is an efficient technology to convert lignin to valuable chemicals, which is beneficial for improving lignin valorization. In this review, pyrolytic behaviors of various lignin were included, as well as the pyrolytic mechanism consisting of initial, primary, and charring stages were also introduced. Several parallel reactions, such as demethoxylation, demethylation, decarboxylation, and decarbonylation of lignin side chains to form light gases, major lignin structure decomposition to generate phenolic compounds, and polymerization of active lignin intermediates to yield char, can be observed through the whole pyrolysis process. Several parameters, such as pyrolytic temperature, time, lignin type, and functional groups (hydroxyl, methoxy), were also investigated to figure out their effects on lignin pyrolysis. On the other hand, zeolite-driven lignin catalytic pyrolysis and lignin co-pyrolysis with other hydrogen-rich co-feedings were also introduced for improving process efficiency to produce more aromatic hydrocarbons (AHs). During the pyrolysis process, phenolic compounds and/or AHs can be produced, showing promising applications in biochemical intermediates and biofuel additives. Finally, some challenges and future perspectives for lignin pyrolysis have been discussed.

Renewable Schiff-Base Ionic Liquids for Lignocellulosic Biomass Pretreatment

Growing interest in sustainable sources of chemicals and energy from renewable and reliable sources has stimulated the design and synthesis of renewable Schiff-base (iminium) ionic liquids (ILs) to replace fossil-derived ILs. In this study, we report on the synthesis of three unique iminium-acetate ILs from lignin-derived aldehyde for a sustainable “future” lignocellulosic biorefinery. The synthesized ILs contained only imines or imines along with amines in their structure; the ILs with only imines group exhibited better pretreatment efficacy, achieving >89% sugar release. Various analytical and computational tools were employed to understand the pretreatment efficacy of these ILs. This is the first study to demonstrate the ease of synthesis of these renewable ILs, and therefore, opens the door for a new class of “Schiff-base ILs” for further investigation that could also be designed to be task specific.

New Insights into the Thermal Stability of 1-Butyl-3-methylimidazolium-Based Ionic Liquids

One of the most promising applications of ionic liquids (ILs) with 1-butyl-3-methylimidazolium (bmim) cation is based on their unique ability to dissolve and fractionate lignocellulosic biomass, allowing for the development of green biorefining technologies. A complete dissolution of lignocellulose requires prolonged treatment at elevated temperatures, which can cause the partial degradation of ILs. In the present study, a combination of various analytical techniques (GC-MS, HPLC-HRMS, 2D-NMR, synchronous thermal analysis) was used for the comprehensive characterization of bmim acetate, chloride, and methyl sulfate degradation products formed at 150 °C during 6- and 24-h thermal treatment. A number of volatile and non-volatile products, including monomeric and dimeric alkyl substituted imidazoles, alcohols, alkyl amines, methyl and butyl acetates, and N-alkylamides, was identified. By thermal lability, ILs can be arranged in the following sequence, coinciding with the decrease in basicity of the anion: [bmim]OAc > [bmim]Cl > [bmim]MeSO4. The accumulation of thermal degradation products in ILs, in turn, affects their physico-chemical properties and thermal stability, and leads to a decrease in the decomposition temperature, a change in the shape of the thermogravimetric curves, and the formation of carbon residue during pyrolysis.

Use of carbohydrate-directed enzymes for the potential exploitation of sugarcane bagasse to obtain value-added biotechnological products

Microorganisms, such as fungi and bacteria, are crucial players in the production of enzymatic cocktails for biomass hydrolysis or the bioconversion of plant biomass into products with industrial relevance. The biotechnology industry can exploit lignocellulosic biomass for the production of high-value chemicals. The generation of biotechnological products from lignocellulosic feedstock presents several bottlenecks, including low efficiency of enzymatic hydrolysis, high cost of enzymes, and limitations on microbe metabolic performance. Genetic engineering offers a route for developing improved microbial strains for biotechnological applications in high-value product biosynthesis. Sugarcane bagasse, for example, is an agro-industrial waste that is abundantly produced in sugar and first-generation processing plants. Here, we review the potential conversion of its feedstock into relevant industrial products via microbial production and discuss the advances that have been made in improving strains for biotechnological applications.

Integrated Bioprocess for Cellulosic Ethanol Production from Wheat Straw: New Ternary Deep-Eutectic-Solvent Pretreatment, Enzymatic Saccharification, and Fermentation

Wheat straw (WS) is an excellent raw material for biofuel ethanol production. However, the recalcitrance of WS prevents its efficient utilization. In this study, a novel ternary deep eutectic solvent (DES) was developed for enhancing component separation and enzymatic saccharification of WS. Without any detoxification and sterilization, the DES-treated WS hydrolysate was successfully used to produce ethanol. Overall, this research evaluated the effect of ternary DES pretreatment on WS at various temperatures and adjusted the enzyme load, substrate concentration, and fermentation method of treated WS. The results suggested that the cellulose recovery of treated WS after DES pretreatment (120 °C, 1 h) was 94.73 ± 0.22%, while the removal of xylan and lignin reached 89.53 ± 0.36% and 80.05 ± 0.62%, respectively. Importantly, at enzyme loading of 11.4 filter paper unit (FPU)/g WS with 16% fermentation substrate concentration, 91.15 ± 1.07% of cellulose was hydrolyzed, and the glucose yield was 71.58 ± 1.34%. The maximum ethanol yield of DES-treated WS was 81.40 ± 0.01%.

Mechanical pretreatment of lignocellulosic biomass toward enzymatic/fermentative valorization

Lignocellulosic biomass (LCB) has the potential to replace fossil fuels, thanks to the concept of biorefinery. This material is formed mainly by cellulose, lignin, and hemicellulose. To maximize the valorization potential of this material, LCB needs to be pretreated. Milling is always performed before any other treatments. It does not produce chemical change and improves the efficiency of the upcoming processes.

Additionally, it makes LCB easier to handle and increases bulk density and transfer phenomena of the next pretreatment step. However, this treatment is energy consuming, so it needs to be optimized. Several mills can be used, and the equipment selection depends on the characteristics of the material, the final size required, and the operational regime: continuous or batch. Among them, ball, knife, and hammer mills are the most used at the laboratory scale, especially before enzymatic or fermentative treatments. The continuous operational regime (knife and hammer mill) allows us to work with high volumes of raw material and can continuously reduce particle size, unlike the batch operating regime (ball mill).

This review recollects the information about the application of these machines, the effect on particle size, and subsequent treatments. On the one hand, ball milling reduced particle size the most; on the other hand, hammer and knife milling consumed less energy. Furthermore, the latter reached a small final particle size (units of millimeters) suitable for valorization.

Pretreatment of Jerusalem artichoke stalk using hydroxylammonium ionic liquids and their influences on 2,3-butanediol fermentation by Bacillus subtilis

Pretreatment of lignocellulose is a vital step for biological production of bio-chemicals and bio-fuels. In this work, the pretreatment of Jerusalem artichoke stalk (JAS) by hydroxylammonium ionic liquids was evaluated based on pretreatment efficiency including polysaccharide recovery and enzymatic digestibility, and influence of ionic liquids on 2,3-butanediol fermentation using Bacillus subtilis. The results showed ethanolammonium acetate (EOAA) was efficient in JAS pretreatment, and maximum cell density was increased 25% when EOAA concentration was not greater than 0.3 mol/L in medium, while the total concentration of acetoin and 2,3-butanediol was 15% greater than the control at 0.1 mol/L EOAA. After the pretreatment under optimized conditions of 170 °C for 5-h and liquid-solid ratio of 18, about 87% cellulose and 75% hemicellulose were recovered, and glucose yield of 64% and xylose of 66% were obtained after 24-h hydrolysis of JAS residue by cellulase (15 FPU/g) with solid loading of 10 wt%.

Assessment of the Pretreatments and Bioconversion of Lignocellulosic Biomass Recovered from the Husk of the Cocoa Pod

The production of biofuels (biogas, ethanol, methanol, biodiesel, and solid fuels, etc.), beginning with cocoa pod husk (CPH), is a way for obtaining a final product from the use of the principal waste product of the cocoa industry. However, there are limitations to the bioconversion of the material due to its structural components (cellulose, hemicellulose, and lignin). Currently, CPH pretreatment methods are considered a good approach towards the improvement of both the degradation process and the production of biogas or ethanol. The present document aims to set out the different methods for pretreating lignocellulosic material, which are: physical (grinding and extrusion, among others); chemical (acids and alkaline); thermochemical (pyrolysis); ionic liquid (salts); and biological (microorganism) to improve biofuel production. The use of CPH as a substrate in bioconversion processes is a viable and promising option, despite the limitations of each pretreatment method.

Biotechnological advances in biomass pretreatment for bio-renewable production through nanotechnological intervention

Globally, the fossil fuel reserves are depleting rapidly and the escalating fuel prices as well as plethora of the pollutants released from the emission of burning fossil fuels cause global warming that massively disturb the ecological balance. Moreover, the unnecessary utilization of non-renewable energy sources is a genuine hazard to nature and economic stability, which demands an alternative renewable source of energy. The lignocellulosic biomass is the pillar of renewable sources of energy. Different conventional pretreatment methods of lignocellulosic feedstocks have employed for biofuel production. However, these pretreatments are associated with disadvantages such as high cost of chemical substances, high load of organic catalysts or mechanical equipment, time consuming, and production of toxic inhibitors causing the environmental pollution. Nanotechnology has shown the promised biorefinery results by overcoming the disadvantages associated with the conventional pretreatments. Recyclability of nanomaterials offers cost effective and economically viable biorefineries processes. Lignolytic and saccharolytic enzymes have immobilized onto/into the nanomaterials for the higher biocatalyst loading due to their inherent properties of high surface area to volume ratios. Nanobiocatalyst enhance the hydrolyzing process of pretreated biomass by their high penetration into the cell wall to disintegrate the complex carbohydrates for the release of high amounts of sugars towards biofuel and various by-products production. Different nanotechnological routes provide cost-effective bioenergy production from the rich repertoires of the forest and agricultural-based lignocellulosic biomass. In this article, a critical survey of diverse biomass pretreatment methods and the nanotechnological interventions for opening up the biomass structure has been carried out.

An Experimental Study on the Hot Alkali Extraction of Xylan-Based Hemicelluloses from Wheat Straw and Corn Stalks and Optimization Methods

In this paper, we describe an experimental study on the hot alkali extraction of hemicelluloses from wheat straw and corn stalks, two of the most common lignocellulosic biomass constituents in Romania. The chemical compositions of the raw materials were determined analytically, and the relevant chemical components were cellulose, hemicelluloses, lignin, and ash. Using the response surface methodology, the optimum values of the hot alkaline extraction parameters, i.e., time, temperature, and NaOH concentration, were identified and experimentally validated. The physicochemical characterization of the isolated hemicelluloses was performed using HPLC, FTIR, TG, DTG, and 1H-NMR spectroscopy. The main hemicellulose components identified experimentally were xylan, arabinan, and glucan. The study emphasizes that both corn stalks and wheat straw are suitable as raw materials for hemicellulose extraction, highlighting the advantages of alkaline pretreatments and showing that optimization methods can further improve the process efficiency.

Gutmann’s Donor and Acceptor Numbers for Ionic Liquids and Deep Eutectic Solvents

An experimental and computational methodology for the analysis of the Lewis acid/base responses of ionic liquids (ILs) and deep eutectic solvents (DES) is proposed. It is based on the donor and acceptor of the electronic charge ability of Lewis acid and bases concepts (donicity and acceptor numbers, DN and AN, respectively) proposed by Viktor Gutmann. The binding enthalpy between the IL/DES with the probe antimony pentachloride (SbCl₅) in dichloroethane displays good correlations with experimental data. This approach could serve as a first approximation to predict the responses to H-bonding abilities of new IL or DES. Although useful, the problems encountered to model the electron AN of these solvents limit the usefulness of the approach to completely describe their polarity properties. The experimental data were recorded using UV–Vis spectroscopy for a wide range of ILs and a couple of DES. Two reactions were used as benchmarks to test the reliability of the DN model to discuss the reactivity of real systems in these neoteric solvents.

Fermentative Lactic Acid Production From Lignocellulosic Feedstocks: From Source to Purified Product

The second (lignocellulosic biomass and industrial wastes) and third (algal biomass) generation feedstocks gained substantial interest as a source of various value-added chemicals, produced by fermentation. Lactic acid is a valuable platform chemical with both traditional and newer applications in many industries. The successful fractionation, separation, and hydrolysis of lignocellulosic biomass result in sugars’ rich raw material for lactic acid fermentation. This review paper aims to summarize the investigations and progress in the last 5 years in lactic acid production from inexpensive and renewable resources. Different aspects are discussed—the type of raw materials, pretreatment and detoxification methods, lactic acid-producers (bacteria, fungi, and yeasts), use of genetically manipulated microorganisms, separation techniques, different approaches of process organization, as well as main challenges, and possible solutions for process optimization.