Sulphur-based autotrophic denitrification of wastewater obtained following graphite production: Long-term performance, microbial communities involved, and functional gene analysis

Salt stimulates sulfide-driven autotrophic denitrification: Microbial network and metagenomics analyses

Sulfur autotrophic denitrification (SADN) is a promising biological wastewater treatment technology for nitrogen removal, and its performance highly relies on the collective activities of the microbial community. However, the effect of salt (a prevailing characteristic of some nitrogen-containing industrial wastewaters) on the microbial community of SADN is still unclear. In this study, the response of the sulfide-SADN process to different salinities (i.e., 1.5 % salinity, 0.5 % salinity, and without salinity) as well as the involved microbial mechanisms were investigated by molecular ecological network and metagenomics analyses. Results showed that the satisfactory nitrogen removal efficiency (>97 %) was achieved in the sulfide-SADN process (S/N molar ratio of 0.88) with 1.5 % salinity. In salinity scenarios, the genus Thiobacillus significantly proliferated and was detected as the dominant sulfur-oxidizing bacteria in the sulfide-SADN system, occupying a relative abundance of 29.4 %. Network analysis further elucidated that 1.5 % salinity had enabled the microbial community to form a more densely clustered network, which intensified the interactions between microorganisms and effectively improved the nitrogen removal performance of the sulfide-SADN. Metagenomics sequencing revealed that the abundance of functional genes encoding for key enzymes involved in SADN, dissimilatory nitrate reduction to ammonium, and nitrification was up-regulated in the 1.5 % salinity scenario compared to that without salinity, stimulating the occurrence of multiple nitrogen transformation pathways. These multi-paths contributed to a robust SADN process (i.e., nitrogen removal efficiency >97 %, effluent nitrogen <2.5 mg N/L). This study deepens our understanding of the effect of salt on the SADN system at the community and functional level, and favors to advance the application of this sustainable bioprocess in saline wastewater treatment.

Effects of salinity on the performance, microbial community, and functional genes among 4-chlorophenol wastewater treatment

Chlorophenols frequently occur alongside salinity in industrial wastewater; thus, the effects of low concentrations of salinity (NaCl, 100 mg/L) on sludge performance, microbial community, and functional genes were deeply analyzed among 4-chlorophenol (4-CP, 2.4-4.0 mg/L) wastewater treatment. The influent 4-CP was effectively degraded, but the efficiencies for PO₄^3--P, NH₄⁺-N, and organics reduction were slightly inhibited by NaCl stress. Long-term NaCl and 4-CP stress significantly stimulated the secretion of extracellular polymeric substances (EPS). The abundances of predominant microbes at different taxonomic levels were affected by NaCl, and the increased relative abundances of functional genes encoding proteins contributed to resist NaCl and 4-CP stress. The functional genes associated with phosphorus metabolism and nitrogen metabolism in nitrification were unaffected, but the functional genes in denitrification increased in diversity under NaCl stress in 4-CP wastewater treatment. This finding acquires useful insight into the wastewater treatment with low chlorophenols and low salinity.

Deciphering the fate of osmotic stress priming on enhanced microorganism acclimation for purified terephthalic acid wastewater treatment with high salinity and organic load

Osmotic stress priming (OSP) was an effective management strategy for improving microbial acclimation to salt stress. In this study, the interaction between pollutants and microbiota, and microbial osmoregulation were investigated triggered by OSP (alternately increasing salinity and organic loading). Results showed that OSP significantly improved COD removal from 31.53 % to 67.99 % and mitigated the terephthalate inhibition produced by toluate, decreasing from 1908.08 mg/L to 837.16 mg/L compared with direct priming. Due to an increase in salinity, Pelotomaculum and Mesotoga were enriched to facilitate terephthalate degradation and syntrophic acetate oxidation (SAO). And organic load promoted acetate formation through syntrophic metabolism of Syntrophorhabdus/Pelotomaculum and SAO-dependent hydrogenotrophic methanogenesis. K⁺ absorbing, proline and trehalose synthesis participated in osmoregulation at 0.5 % salinity, while only ectoine alleviated intracellular osmolarity under 1.0 % salinity with OLR of 0.44 kg COD /m³. This study provided in-depth insight for microbial acclimation process of anaerobic priming of saline wastewater.

High-rate iron sulfide and sulfur-coupled autotrophic denitrification system: Nutrients removal performance and microbial characterization

Iron sulfides-based autotrophic denitrification (IAD) is a promising technology for nitrate and phosphate removal from low C:N ratio wastewater due to its cost-effectiveness and low sludge production. However, the slow kinetics of IAD, compared to other sulfur-based autotrophic denitrification (SAD) processes, limits its engineering application. This study constructed a co-electron-donor (FeS and S⁰ with a volume ratio of 2:1) iron sulfur autotrophic denitrification (ISAD) biofilter and operated at as short as 1 hr hydraulic retention time (HRT). Long-term operation results showed that the superior total nitrogen and phosphate removals of the ISAD biofilter were 90-100% at 1-12 h HRT, with the highest denitrification rate up to 960 mg/L/d. Considering low sulfate production, HRT of 3 h could be the optimal condition. Such superior performance in the ISAD biofilter was achieved due to the interactions between FeS and S⁰, which accelerated the denitrification process and maintained the acidity-alkalinity balance. Metagenomic analysis found that the enriched nitrate-dependent iron-oxidizing (NDFO) bacteria (Acinetobacter and Acidovorax), sulfur-oxidizing bacteria (SOB), and dissimilatory nitrate reduction to ammonia (DNRA) bacteria likely supported stable nitrate reduction. The metabolic pathway analysis showed that completely denitrification and DNRA, coupled with sulfur oxidation, disproportionation, iron oxidation and phosphate precipitation with FeS and S⁰ as co-electron donors, were responsible for the high-rate nitrate and phosphate removal. This study provides the potential of ISAD as a highly efficient post-denitrification technology and sheds light on the balanced microbial S-N-Fe transformation.

Response of microbial community and biological nitrogen removal to the accumulation of nonylphenol in sequencing batch reactor

The widespread existence of nonylphenol in the environmental rendered from wastewater discharge has become a growing concern for its endocrine disrupting effects on microorganisms. In this study, the performance of nitrifying and denitrifying microbial community in a sequencing batch reactor (SBR) was investigated under different nonylphenol concentrations. The SBR was shown to be less effective in nitrogen removal at higher concentration of nonylphenol. Proteobacteria, Bacteroidetes, and Actinobacteria were characterized by 454 pyrosequencing as the dominant bacteria, nitrogen removal functional bacteria in these three phyla were inhibited by nonylphenol, and Proteobacteria and Actinobacteria were more sensitive to nonylphenol. With the accumulation of nonylphenol, the population of the most abundant denitrifying bacteria (Thauera spp.) and nitrifying bacteria (Nitrosomonas spp.) significantly reduced. Microbial diversity increased due to nonylphenol perturbation, which is indicated by the changes in microbial alpha diversity. Principal component analysis showed high similarity between microbial community in low and high concentration of nonylphenol, and the core genera involved in nitrogen removal had a low correlation with other genera shown in co-occurrence network. Moreover, linear discriminant analysis effect size analysis revealed intergroup differences in microorganisms. The mechanism of accumulated NP on the diversity and metabolism of the microbial community was examined. This paper established a theoretical foundation for the treatment of NP-containing wastewater and provided hints for further research about NP impact on biological nitrogen removal.

Graphical abstract

Supplementary Information

The online version contains supplementary material available at 10.1007/s13762-023-04825-9.

Effect of sulfur particle morphology on the performance of element sulfur-based denitrification packed-bed reactor

The effect of particle morphology on denitrification performance in element sulfur-based denitrification (ESDeN) packed-bed process is a gap. In this study, three different types of commercial sulfur particles were selected to build the ESDeN reactors. The results showed the reactors filled with rougher sulfur particles took shorter time to reach stable denitrification performance in the start-up stage. The reactors filled with cap-shape sulfur particles received the maximum nitrate removal rate of 849.49 ± 79.29 g N m^-3 d^-1 at empty bed contact time of 0.50 h, which was 2.34 times higher than that with ball-shape sulfur particles in the steady stage. The superior denitrification performance in the cap-shape particles set linked to its larger effective volumetric surface area (ω_e, 1.67 times larger) and to the longer actual hydraulic retention time (AHRT, 1.80 times longer). This study extends the knowledge of the dependency of sulfur particle properties on denitrification performance in ESDeN packed-bed reactor.

Enhancement and mechanisms of micron-pyrite driven autotrophic denitrification with different pretreatments for treating organic-limited waters

Pyrite-driven autotrophic denitrification (PAD) represents a cheap and promising way for nitrogen removal from organic-limited wastewater, which has obtained increasing attention in recent years. However, the limited denitrification rate and unclear mechanism underlying the process have hindered the engineered application of PAD. This study aims to shed light on the impacts of different pretreatments (i.e., ultrasonication, acid-washing and calcination) on micron-pyrite surface characteristics, denitrification performance and biofilm formation during PAD in batch reactors. A series of solid-phase analyses revealed that all pretreatments could significantly promote biofilm attachment on pyrite granules, but impacted the proportion, distribution and chemical oxidation state of sulfur (S) and iron (Fe) at varying degrees. Batch tests showed that ultrasonication and acid-washing could enhance the total nitrogen reduction rate by 14% and 99%, and decrease the sulfate production rate by 51% and 42%, respectively, when compared with untreated pyrite. Microbial community analysis indicated that Thiobacillus and Rhodanobacter dominated in PAD systems. Two types of indirect mechanisms (i.e., contact and non-contact) for pyrite leaching may co-occur in PAD system, resulting in ferrous iron (Fe²⁺), thiosulfate (S₂O₃^2-) and sulfide (S^2-) as the main electron donors for denitrification. A PAD mechanism model was proposed to describe the PAD electron transfer pathway with the aim to optimize the engineered application of PAD for nitrogen removal.

Coupled sulfur and electrode-driven autotrophic denitrification for significantly enhanced nitrate removal

Elemental sulfur (S⁰)-based autotrophic denitrification (SAD) has gained intensive attention in the treatment of secondary effluent for its low cost, high efficiency, and good stability. However, in practice, the supplementary addition of limestone is necessary to balance the alkalinity consumption during SAD operation, which increases water hardness and reduces the effective reaction volume. In this study, a coupled sulfur and electrode-driven autotrophic denitrification (SEAD) process was proposed with superior nitrate removal performance, less accumulation of sulfate, and self-balance of acidity-alkalinity capacity by regulating the applied voltage. The dual-channel electron supply from S⁰ and electrodes made the nitrate removal rate constant k in the SEAD process 3.7-5.1 and 1.4-3.5 times higher than that of the single electrode- and sulfur-driven systems, respectively. The S° contributed to 75.3%-83.1% of nitrate removal and the sulfate yield during SEAD (5.67-6.26 mg SO₄^2-/mg NO₃^--N) was decreased by 17%-25% compared with SAD. The S⁰ particle and electrode both as active bio-carriers constructed collaborative denitrification communities and functional genes. Pseudomonas, Ralstonia and Brevundimonas were the dominant denitrifying genera in S⁰ particle biofilm, while Pseudomonas, Chryseobacterium, Pantoea and Comamonas became dominant denitrifying genera in the cathode biofilm. The narG/Z/H/Y/I/V, nxrA/B, napA/B, nirS/K, norB/C and nosZ were potential functional genes for efficient nitrate reduction during the SEAD process. Metagenomic sequencing indicated that S⁰ as an electron donor has greater potential for complete denitrification than the electrode. These findings revealed the potential of SEAD for acting as a highly efficient post denitrification process.

Design, preparation, characterization, and application of MnxCu1-xOy/γ-Al2O3 catalysts in ozonation to achieve simultaneous organic carbon and nitrogen removal in pyridine wastewater

In the process of treating high-concentration pyridine wastewater, problems such as low treatment efficiency and total nitrogen (TN) residues are always encountered. Catalytic ozonation can degrade pyridine wastewater well, and it also has the potential to remove TN. However, limited research has been conducted on the development of ozonation catalysts that can simultaneously remove the total organic carbon (TOC) and TN. Density functional theory (DFT) technology can determine the number of active components on the catalyst based on its composition; therefore, it can be used to guide the research and development of such catalysts. Here, we presented a strategy to guide the preparation of two-component Mn and Cu catalysts using DFT technology. By characterising and applying the prepared Mn_xCu_1-xO_y/γ-Al₂O₃ catalysts, it was confirmed that the DFT accurately predicted the changes in the active site content. The selected catalyst also achieved strong TOC and TN removal rates during the catalytic ozonation of high-concentration pyridine wastewater. A Box-Behnken design and response surface methodology was used to optimise the process conditions of catalytic ozonation and verify its stability. Under the optimal reaction conditions, the TOC and TN removal efficiencies from a 500 mg/L pyridine solution were 99.8% and 45.8%, respectively. This work indicated that the use of DFT for the design of catalytic materials was an effective method, which can provide a theoretical basis for material design and reduce the time for material screening.

Comparison of the effects of salinity on microbial community structures and functions in sequencing batch reactors with and without carriers

This study investigated and compared the microbial communities between a sequencing batch reactor (SBR) without carriers and a hybrid SBR with addition of carriers for the treatment of saline wastewater. The two systems were operated over 292 days with alternating aerobic/anoxic mode (temperature: 28℃, salinity: 0.0-3.0%). High removal efficiency of chemical oxygen demand (COD) and total inorganic nitrogen (TIN) was achieved in both the SBR (above 86.7 and 95.4% respectively) and hybrid SBR (above 84.4 and 94.0%) at 0.0-2.5% salinity. Further increasing salinity to 3.0% decreased TIN removal efficiency to 78.4% in the hybrid SBR. Steep decline of biodiversity and relative abundance of ammonia-oxidizing bacteria (AOB) contributed to the worse performance. More genera related to sulfide-oxidizing and sulfate-reducing bacteria were detected in the hybrid SBR than the SBR at 3.0% salinity. The abundance of halotolerant bacteria increased with the salinity increase for both reactors, summing up to 25.5% in the suspended sludge (S-sludge) from the SBR, 28.9 and 22.9% in the S-sludge and biofilm taken from the hybrid SBR, respectively. Nitrification and denitrification via nitrate was the main nitrogen removal pathway in the SBR and hybrid SBR at 0.0 and 0.5% salinity, while partial nitrification and denitrification via nitrite became the key process for nitrogen removal in the two reactors when the salinity was increased to 1.0-3.0%. Higher abundance of anaerobic ammonium-oxidizing (ANAMMOX) and sulfide-oxidizing autotrophic denitrification (SOAD) bacteria were found in the hybrid SBR at 3.0% salinity.