Ball milling as a mechanochemical technology for fabrication of novel biochar nanomaterials

Robust polyaniline coating magnetic biochar nanoparticles for fast and wide pH and temperature range removal of nanoplastics and achieving label free detection

Nanoplastics as an emerging pollutant are ubiquitous in water and still not easy to measure and remove. In this regard, polyaniline coating magnetic biochar nanoparticles constructed by pyrolysis of ferrate pretreated bagasse and ball milling and coating surface with polyaniline (PA@MBCBM) were tested for their capability to attach and remove polystyrene nanoplastics in water. Porousness and rich functional groups and positive charging property of PA@MBCBM was responsible for fast, high capacity and robust attaching of nanoplastics. 94.9 % - 99.0 % of nanoplastics were removed at wide range of pH conditions (1 - 10) and PA@MBCBM was reusable for seven times with less changing of performance, and maximum adsorption capacities reached 276.24 - 334.45 mg/g at both cold and warm temperatures (5 - 35 °C). Moreover, taking advantages of efficient nanoplastics adhesion, high conductivity and electrochemical activity, the PA@MBCBM, was tested to fabricate a label free screen-printed electrode for nanoplastics detection, and achieved reasonable sensitivity with the lowest detection limit being 1.26 μg/L. In addition, exceptional performances of adsorption and detection in real water samples were also successfully realized. The proposed PA@MBCBM having dual function of robust and efficient adsorption removal, and label free and sensitive determination of nanoplastics, would be greatly constructive for reliable, cost effective and effective control and monitoring of the nanoplastics contamination.

Mechanisms of removing terdizolamide phosphate from water by the activation of potassium peroxymonosulfate with CeFe2O4 biochar

Terdizolamide phosphate (TZD), a second-generation oxazolidinone antibiotic with a long half-cycle, poses a potential threat to ecosystems and humans if present in water over an extended duration. Magnetic biochar (CF-biochar) loaded with CeFe2O4 was firstly synthesized by microwave ablation-anaerobic carbonization using corn straw as raw material and Ce(NO3)3 and Fe(NO3)3 as modifiers. These modifiers were used as activators for peroxymonosulfate (PMS) and adsorbents for removing TZD. The maximum adsorption capacity of CF-biochar was up to 2869.44 mg g-1, which was much higher than that of modified biochar. The CF-biochar/PMS system achieved 99.72% removal of TZD and accelerated the removal rate with good results. Results from quenching and electron spin resonance (ESR) tests showed that · O H andSO 4 · - played a major role in the oxidative degradation of TZD. Besides, they had a good removal effect on TZD among other co-existing anions. CF-biochar exhibited a smaller particle size, larger specific surface area, more abundant pore size, and high magnetic nature. The removal kinetics and removal isotherms were modeled to show that the adsorption of TZD by CF-biochar was a spontaneous, exothermic, physical multilayer adsorption process. Main driving force corresponded to electrostatic attraction and hydrophobic properties. Therefore, the CF-biochar/PMS system was an efficient, promising, and sustainable technology for removing TZD.

Enhanced adsorption and regulation mechanism of ball milling-modified biochar on Cd and atrazine in soil

In order to improve the adsorption and immobilization capacity of biochar for Cd and atrazine in soil, the biochar was prepared from corn straw and modified by dry ball milling under various conditions. Compared with the pristine biochar (PB), the ball-milled biochar (BB) had a larger specific surface area and more pores, the number of oxygen-containing functional groups increased significantly, and the adsorption capacity of Cd and atrazine increased by 9.0% and 139.4%, respectively. Compared with a single pollutant, the adsorption capacity of PB and BB for Cd increased by 4.6% and 9.3%, respectively, and the adsorption capacity of atrazine increased by 97.1% and 11.5%, respectively. The increase of atrazine adsorption after modification was higher than that of Cd. In the desorption test, ball-milled modification decreased the desorption rate of Cd and atrazine, while the desorption rate of atrazine was much lower than that of Cd. Therefore, the biochar modified by ball-milled had stronger adsorption and fixation capacity for Cd and atrazine, which provides a basis for more effective remediation of soil polluted by Cd and atrazine.

Magnetic nanoparticles of Nd2Fe14B prepared by ethanol-assisted wet ball milling technique

The magnetic material Nd2Fe14B is one of the strongest magnetic materials found in nature. The demand for the production of these nanoparticles is significantly high due to their exceptional properties. The aim of the present study is to synthesize magnetic nanoparticles of Nd2Fe14B using ethanol in the wet ball milling technique (WBMT). Nd2Fe14B powder an average particle size(APS) of 730 nm was subjected to wet ball milling in stainless steel cup containing 5 mm diameter steel balls.The powder was milled for 12 h at 400 rpm, with intervals of 15 min and a 15-second pause each time. The morphology of the powder and nanoparticles, crystallinity, changes of the samples under temperature, magnetic properties, and the structural bonds were analyzed using field emission scanning electron microscopy (FESEM), X-ray diffraction (XRD), thermogravimetric analysis (TGA), vibrating sample magnetometry (VSM), and Fourier-transform infrared spectroscopy (FTIR).The microstructural images revealed that the shape of the particles changed from flat(730 nm) to spherical(76 nm) after WBMT. The crystallinity results indicated a hexagonal crystal structure, with the average crystallite size being 17.1 nm. In the spectrum of the synthesized Nd2Fe14B nanoparticles, a peak appeared at a wavenumber of 803 cm-1, along with peaks at wavenumbers of 1037 cm-1 and 1083 cm-1, which are associated with the stretching vibrations of Nd-Fe, Fe-B, and Nd-B bonds, respectively. Numerical results of magnetic performance parameters indicated the ferromagnetic properties of the particles(HC = 6097.47, Mr = 34.65 and MS = 49.11).It appears that in WBMT, the operational parameters significantly affect the average crystallite size, saturation magnetization, as well as the size and shape of the nanoparticles. Additionally, the ferromagnetic nature of Nd2Fe14B in the hysteresis loop plays an important role in the thermal stability of the nanoparticles.

An exploration of RSM, ANN, and ANFIS models for methylene blue dye adsorption using Oryza sativa straw biomass: a comparative approach

This study focused on simulating the adsorption-based separation of Methylene Blue (MB) dye utilising Oryza sativa straw biomass (OSSB). Three distinct modelling approaches were employed: artificial neural networks (ANN), adaptive neuro-fuzzy inference systems (ANFIS), and response surface methodology (RSM). To evaluate the adsorbent's potential, assessments were conducted using Fourier-transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). The evaluation of RSM, ANN, and ANFIS included the quantification of R2, mean squared error (MSE), root mean square error (RMSE), and mean absolute error (MAE) metrics. The regression coefficients from the process modelling demonstrated that RSM (R2 = 0.9216), ANN (R2 = 0.8864), and ANFIS (R2 = 0.9589) all accurately predicted MB adsorptive removal. However, comparative statistical analysis revealed that the ANFIS model exhibited superior accuracy in data-based predictions compared to ANN and RSM models. The ideal pH for MB adsorption utilizing OSSB was established as 7. Additionally, favourable outcomes were obtained with 60-minute contact durations, 20 mg adsorbent quantities, and temperatures of 30 °C. The pseudo 2nd -order kinetic model for MB adsorption by OSSB was confirmed. The equilibrium data exhibited a superior fit with the Langmuir isotherm model in comparison to the Freundlich model. The thermodynamic adsorption parameters, including (∆G = -9.1489 kJ/mol), enthalpy change (∆H = -1457.2 kJ/mol), and entropy change (∆S = -19.03 J mol-1 K-1) indicated that the adsorption of MB onto the OSSB surface is exothermic and spontaneous under the experimental conditions. This research effectively showcased the potential of RSM, ANN, and ANFIS in simulating dye removal using OSSB. The generated parameter data proved valuable for the design and control of the adsorption process.

General Synthesis of High-Entropy Oxides and Carbon-Supported High-Entropy Oxides by Mechanochemistry

High-entropy oxides (HEOs) have been receiving a lot of attention due to their excellent properties. However, current common methods for preparing HEOs usually involve high-temperature processes. The development of green synthesis techniques remains an important issue. Carbon-supported HEOs have shown excellent performance in electrochemical energy storage in recent years. Crucially, the traditional methods cannot synthesize carbon-supported HEOs under N2 or air atmospheres. Toward this end, a universal method for preparing carbon-supported HEOs was proposed. During this process, without high-temperature post-treatment, high-entropy LaMnO3 could be synthesized in 2 hours using the mechanical ball-milling method. Furthermore, this method was universal and has been proved in the synthesis of a series of HEOs such as PrVO3, SmVO3, and MgAl2O4. The LaMnO3 species synthesized by this method exhibit excellent catalytic performance in CO combustion and could maintain a conversion rate of over 97 % for 350 hours. Subsequently, carbon-supported HEOs could be obtained with 0.5 hours of additional ball-milling, offering significant advantages over traditional methods. This process provides a potential method to synthesize carbon-supported HEOs.

Optimizing soil properties, water use efficiency, and crop yield through biochar and organic manure integration in organic soil

Speedy decomposition of organic manure and efficient utilization of rice husk waste are two critical challenges for sustainable environment and soil health management. However, understanding the synergistic effects of rice husk biochar (B) and organic manure (OM) on soil properties and crop growth in subtropical conditions remains unclear. A field study was conducted to investigate the impact of sole and combined application of rice husk biochar (0 t ha-1, 3 t ha-1), farmyard manure (FYM), and vermicompost (VC) on soil aggregation, aggregate-associated carbon, water use efficiency (WUE), economic benefits, and yield of radish crop in sandy clay loam organic soil. Biochar application enhanced the macroaggregate stability and aggregate associated C contents. Soil moisture, infiltration rate (IR) and WUE were significantly improved by 9.2%, 20.8% and 13.6%, respectively, with addition of biochar, which might be related to improved aggregate-associated carbon and water retention in the soil. Similarly, improved soil properties, WUE were noticed in the treatment receiving combination of FYM + VC over the control. 16% and 30.9% higher radish yield was observed with biochar and FYM + VC amended treatments compared without B0 and manure OM0, respectively. The integrated use of biochar (3 t ha-1) and OM (FYM + VC) resulted in highest economic benefits of net return (₹ 138,325 ha-1) and B:C (1:5) ratio and least in control plots. These results indicate that adding biochar in organic management practices considerably improved the soil properties, WUE which resulted in increased organic radish production.

Advances in sustainable production and applications of nano-biochar

Biochar is a carbonaceous material that can be amplified into nano-biochar (N-BC) using different physicochemical techniques. Contrary to bulk biochar, nano-biochar, and have better physicochemical characteristics, including a large specific surface area, pore properties, distinctive nanostructure, and high catalytic activity. The spotlight of this review is to contribute up-to-date information on the scaling up of biochar into nano-biochar through various sustainable techniques. This review paper is a compilation of research on nano-biochar from biochar including preparation, distinctive characteristics, and intended applications in the environmental and agricultural sectors, along with some other cutting-edge applications, which are all covered in detail in this review paper and also provides the knowledge gap that will be useful for future investigation and development.

Zeolites in wastewater treatment: A comprehensive review on scientometric analysis, adsorption mechanisms, and future prospects

Zeolites possess a microporous crystalline structure, a large surface area, and a uniform pore size. Natural or synthetic zeolites are commonly utilized for adsorbing organic and inorganic compounds from wastewater because of their unique physicochemical properties and cost-effectiveness. The present review work comprehensively revealed the application of zeolites in removing a diverse range of wastewater contaminates, such as dyes, heavy metal ions, and phenolic compounds, within the framework of contemporary research. The present review work offers a summary of the existing literature about the chemical composition of zeolites and their synthesis by different methods. Subsequently, the article provides a wide range of factors to examine the adsorption mechanisms of both inorganic and organic pollutants using natural zeolites and modified zeolites. This review explores the different mechanisms through which zeolites effectively eliminate pollutants from aquatic matrices. Additionally, this review explores that the Langmuir and pseudo-second-order models are the predominant models used in investigating isothermal and kinetic adsorption and also evaluates the research gap on zeolite through scientometric analysis. The prospective efficacy of zeolite materials in future wastewater treatment may be assessed by a comparative analysis of their capacity to adsorb toxic inorganic and organic contaminates from wastewater, with other adsorbents.

Assembly of root-associated bacterial community and soil health in cadmium-contaminated soil affected by nano/bulk-biochar compost associations

Biochar (BC) has been proven effective in promoting the production of safety food in cadmium (Cd)-polluted soil and the impact can be further enhanced through interaction with compost (CM). However, there existed unclear impacts of biochar with varying particle sizes in conjunction with compost on microbiome composition, rhizosphere functions, and soil health. Hence, in this study, two bulk-biochar derived from wood chips and pig manure were fabricated into nano-biochar using a ball-milling method. Subsequently, in a field experiment, the root-associated bacterial community and microbial functions of lettuce were evaluated in respond to Cd-contaminated soil remediated with nano/bulk-BCCM. The results showed that compared to bulk-BCCM, nano-BCCM significantly reduced the Cd concentration in the edible part of lettuce and the available Cd in the soil. Both nano-BCCM and bulk-BCCM strongly influenced the composition of bacterial communities in the four root-associated niches, and enhanced rhizosphere functions involved in nitrogen, phosphorus, and carbon cycling, as well as the relative abundance and biodiversity of keystone modules in rhizosphere soil. Furthermore, soil quality index analysis indicated that nano-BCCM exhibited greater potential than bulk-BCCM in maintaining soil health. The data revealed that nano-BCCM could regulate the Cd concentration in lettuce shoot by promoting microbial biodiversity of keystone modules in soil-root continuum and rhizosphere bacterial functions. These findings suggest that nano-biochar compost associations can be a superior strategy for enhancing microbial functions, maintaining soil health, and ensuring crop production safety in the Cd-contaminated soil compared to the mix of bulk-biochar and compost.

Ball Milling and Magnetic Modification Boosted Methylene Blue Removal by Biochar Obtained from Water Hyacinth: Efficiency, Mechanism, and Application

Ball milling is a feasible and promising method of biochar modification that can significantly increase its adsorption ability to methylene blue (MB). This study synthesized nine biochars derived from water hyacinth under different pyrolysis temperatures and modified with ball milling and Fe3O4. The structural properties of the pristine and ball-milled magnetic biochars were investigated and employed to adsorb MB. The results showed that ball milling significantly enhanced the specific surface area, total pore volume, and C-, N-, and O-containing groups of biochars, especially in low-temperature pyrolysis biochars. The Langmuir isotherm and the pseudo-secondary kinetic model fitted well with the MB adsorption process on biochars. After ball-milled magnetic modification, the adsorption capacity of biochar at 350 °C for MB was increased to 244.6 mg g-1 (8-fold increase), owing to an increase in accessible functional groups. MB removal efficiencies by low-temperature pyrolysis biochars were easily affected by pH, whereas high-temperature pyrolysis biochars could effectively remove MB in a wide pH range. WQM1, with the high adsorption capacity and stability, provided the potential to serve as an adsorbent for MB removal. Based on DFT calculations, the chemisorption and electrostatic interactions were the primary mechanism for enhancing MB removal with ball-milled magnetic biochar at low-temperature pyrolysis, followed by H-bonding, π-π interaction, hydrophobic interaction, and pore filling.

CaO assisted mechanochemical remediation of lindane-contaminated soil

In this study, the planetary ball milling with CaO addition was used to remediate lindane-contaminated soil. Based on Hertzian theory, a mathematical model was proposed to simulate the trajectory of grinding ball and the local energy transfer during a planetary operation at the disk rotation velocities of 150-250 rpm. Besides, the influence of different parameters on lindane removal in soil was investigated, whose results showed that disk rotation velocity and reagent-to-soil ratio had a positive effect, while soil moisture, initial concentration of lindane, and mass of polluted soil demonstrated a negative influence. The mechanochemical method exhibited a higher degradation performance at 3 wt% CaO addition, and a disk rotation velocity of 250 rpm. Active species generated by ball collisions in the presence of CaO, especially superoxide (·O2-) demonstrated a significant role in participating in the lindane conversion. In combination with GCMS and XPS analysis, the proposed model provides insight into mechanochemical remediation process from physical and chemical perspectives, which mainly includes four main steps: mixing, inducing, chemical reaction, and structure destruction.

Production and physico-chemical characterization of nano-sized collagen from equine tendon

In recent years, significant academic and commercial interest has focused on collagen derived from horse tendons, with potential applications across diverse sectors such as medicine, pharmaceuticals, and cosmetics. Nano collagen, with its enhanced wound penetration, improved cell contact, and heightened cellular regeneration and repair capabilities due to its high surface area, holds promise for a wide range of applications. In this study, we present a novel method for producing nano collagen from the equine tendon. Our approach is characterized by its speed, affordability, simplicity and environmentally friendly nature, with precise temperature-control to prevent collagen denaturation. We conducted a comprehensive characterization of the obtained samples, including assessments of morphology, chemical and thermal properties, particle size distribution and biocompatibility. Importantly, our results indicate improvements in thermal stability, and surface roughness of nano collagen, while preserving its molecular weight. These advancements expand the potential applications of nano collagen in various fields.

Exploring nanomaterial-modified biochar for environmental remediation applications

Environmental pollution, particularly from heavy metals and toxic elements, poses a significant threat to both human health and ecological systems. While various remediation technologies exist, there is an urgent need for cost-effective and sustainable solutions. Biochar, a carbon-rich product derived from the pyrolysis of organic matter, has emerged as a promising material for environmental remediation. However, its pristine form has limitations, such as low adsorption capacities, a relatively narrow range of pH adaptability which can limit its effectiveness in diverse environmental conditions, and a tendency to lose adsorption capacity rapidly in the presence of competing ions or organic matters. This review aims to explore the burgeoning field of nanomaterial-modified biochar, which seeks to overcome the limitations of pristine biochar. By incorporating nanomaterials, the adsorptive and reactive properties of biochar can be significantly enhanced. Such modifications, especially biochar supported with metal nanoparticles (biochar-MNPs), have shown promise in various applications, including the removal of heavy metals, organic contaminants, and other inorganic pollutants from aqueous environments, soil, and air. This review provides a comprehensive overview of the synthesis techniques, characterization methods, and applications of biochar-MNPs, as well as discusses their underlying mechanisms for contaminant removal. It also offers insights into the advantages and challenges of using nanomaterial-modified biochar for environmental remediation and suggests directions for future research.

Structure changes of lignin and their effects on enzymatic hydrolysis for bioethanol production: a focus on lignin modification

Enzymatic hydrolysis contributes to obtaining fermentable sugars using pretreated lignocellulose materials for bioethanol generation. Unfortunately, the pretreatment of lignocellulose causes low substrate enzymatic hydrolysis, which is due to the structure changes of lignin to produce main phenolic by-products and non-productive cellulase adsorption. It is reported that modified lignin enhances the speed of enzymatic hydrolysis through single means to decrease the negative effects of fermentation inhibitors or non-productive cellulase adsorption. However, a suitable modified lignin should be selected to simultaneously reduce the fermentation inhibitors concentration and non-productive cellulase adsorption for saving resources and maximizing the enzymatic hydrolysis productivity. Meanwhile, the adsorption micro-mechanisms of modified lignin with fermentation inhibitors and cellulase remain elusive. In this review, different pretreatment effects toward lignin structure, and their impacts on subsequent enzymatic hydrolysis are analyzed. The main modification methods for lignin are presented. Density functional theory is used to screen suitable modification methods for the simultaneous reduction of fermentation inhibitors and non-productive cellulase adsorption. Lignin-fermentation inhibitors and lignin-cellulase interaction mechanisms are discussed using different advanced analysis techniques. This article addresses the gap in previous reviews concerning the application of modified lignin in the enhancement of bioethanol production. For the first time, based on existing studies, this work posits the hypothesis of applying theoretical simulations to screen efficient modified lignin-based adsorbents, in order to achieve a dual optimization of the detoxification and saccharification processes. We aim to improve the integrated lignocellulose transformation procedure for the effective generation of cleaner bioethanol.

Ball-milled biochar-modified zero-valent aluminum activates peroxodisulfate for phenol degradation: Enhancement of catalysis by membrane-breaking effect

Zero-valent aluminum (ZVAl) is a potential activator for peroxodisulfate (PDS), yet the dense oxide film on its surface hampers electron transfer for the O-O bond cleavage of PDS. We synthesized zero-valent aluminum-biochar (BM-ZVAl@BC) composites through ball milling, which effectively disrupted the native oxide layer on BM-ZVAl@BC. Within the BM-ZVAl@BC/PDS system, biochar (BC) not only suppressed the rapid oxidation of BM-ZVAl@BC but also enhanced the dispersion and electron transfer rate of ZVAl, thereby improving the overall catalytic efficiency. Consequently, the phenol removal efficacy in the BM-ZVAl@BC/PDS system was notably improved. Optimal catalytic performance of the prepared BM-ZVAl@BC was achieved at a charcoal-to‑aluminum mass ratio of 2:1, resulting in 95.7 % phenol removal after 180 min. Quenching experiments and electron paramagnetic resonance (EPR) analysis revealed that both free radicals (SO4•-, •OH, and O2•-) and non-radical species (1O2) contributed to phenol degradation, with SO4•- and •OH playing predominant roles. In summary, the BM-ZVAl@BC/PDS system represented an effective and promising technology for the remediation of phenolic water pollutants.

Mechanism Study on the Immobilization of Cu2+/Pb2+ in Aqueous Phase by Mineral Co-Milling-Modified Biochar

A large number of studies have shown that the modification of biochar can greatly improve its adsorption capacity. This study adopts a one-step ball milling technology without solvent medium, using sawdust biochar (600 °C) and attapulgite/diatomaceous earth to prepare MABC10%/MDBC10% (mass ratio: 10% attapulgite/diatomite +90% biochar coabrasive). Characterization experiments show that attapulgite/diatomite was successfully loaded on biochar and has more C/O functional groups and wider adsorption pore sizes. Adsorption kinetics and isotherm experiments show that the adsorption process of MABC10% and MDBC10% on Cu2+/Pb2+ was mainly multilayer chemical adsorption. The adsorption capacities of MABC10% and MDBC10% for Cu2+ were 40.85 and 65.20 mg·L-1, respectively. The adsorption amounts of Pb2+ were 82.63 and 71.32 mg·L-1, respectively. The particle diffusion model shows that the adsorption process was controlled by both the surface adsorption rate limitation and boundary layer diffusion. The higher acidity in the solution will cause part of the negative charges on the surface of attapulgite/diatomite to be neutralized, thereby hindering its adsorption of Cu2+/Pb2+. The presence of coexisting ions did not significantly affect the adsorption performance. Mechanistic studies have shown that pore diffusion, active sites provided by C/O functional groups, electrostatic interactions, and cation exchange are the main mechanisms of MABC10% adsorption of Cu2+/Pb2+. In summary, MABC10% has a significant adsorption synergistic effect compared to MBC. It was an economical and effective adsorbent, and the higher the pH value of the wastewater, the more significant the adsorption effect.

Recent advancement of nano-biochar for the remediation of heavy metals and emerging contaminants: Mechanism, adsorption kinetic model, plant growth and development

Even though researches have shown that biochar can improve soil-health and plant-growth even in harsh environments and get rid of harmful heavy metals and new contaminants, it is still not sustainable, affordable, or effective enough. Therefore, scientists are required to develop nanomaterials in order to preserve numerous aquatic and terrestrial species. The carbonaceous chemical known as nano-biochar (N-BC) can be used to get rid of metal contamination and emerging contaminants. However, techniques to reduce hetero-aggregation and agglomeration of nano-biochar are needed that lead to the emergence of emerging nano-biochar (EN-BC) in order to maximise its capacity for adsorption of nano-biochar. To address concerns in regards to the expanding human population and sustain a healthy community, it is imperative to address the problems associated with toxic heavy metals, emerging contaminants, and other abiotic stressors that are threatening agricultural development. Nano-biochar can provide an effective solution for removal of emerging contaminants, toxic heavy metals, and non-degradable substance. This review provides the detailed functional mechanistic and kinetics of nano-biochar, its effectiveness in promoting plant growth, and soil health under abiotic stress. Nonetheless, this review paper has comprehensively illustrated various adsorption study models that will be employed in future research.

Ball billing induced highly dispersed nano-MgO in biochar for glucose isomerization at low temperatures

The isomerization of glucose is a crucial step for biomass valorization to downstream chemicals. Herein, highly dispersed MgO doped biochar (BM-0.5@450) was prepared from rice straw via a solvent-free ball milling pretreatment and pyrolysis under nitrogen conditions. The nano-MgO doped biochar demonstrated enhanced conversion of glucose in water at low temperatures. A 31 % yield of fructose was obtained from glucose over BM-0.5@450 at 50 °C with 80.0 % selectivity. At 60 °C for 140 min, BM-0.5@450 achieved a 32.5 % yield of fructose. Compared to catalyst synthesized from conventional impregnation method (IM@450), the BM-0.5@450 catalyst shows much higher fructose yields (32.5 % vs 25.9 %), which can be attributed to smaller crystallite size of MgO (11.32 nm vs 19.58 nm) and homogenous distribution. The mechanism study shows that the activated MgOH+·OH- group by water facilitated the deprotonation process leading to the formation of key intermediate enediol.

Investigating composite electrode materials of metal oxides for advanced energy storage applications

Electrochemical energy systems mark a pivotal advancement in the energy sector, delivering substantial improvements over conventional systems. Yet, a major challenge remains the deficiency in storage technology to effectively retain the energy produced. Amongst these are batteries and supercapacitors, renowned for their versatility and efficiency, which depend heavily on the quality of their electrode materials. Metal oxide composites, in particular, have emerged as highly promising due to the synergistic effects that significantly enhance their functionality and efficiency beyond individual components. This review explores the application of metal oxide composites in the electrodes of batteries and SCs, focusing on various material perspectives and synthesis methodologies, including exfoliation and hydrothermal/solvothermal processes. It also examines how these methods influence device performance. Furthermore, the review confronts the challenges and charts future directions for metal oxide composite-based energy storage systems, critically evaluating aspects such as scalability of synthesis, cost-effectiveness, environmental sustainability, and integration with advanced nanomaterials and electrolytes. These factors are crucial for advancing next-generation energy storage technologies, striving to enhance performance while upholding sustainability and economic viability.

Use of rice straw nano-biochar to slow down water infiltration and reduce nitrogen leaching in a clayey soil

Biochar exhibits numerous advantages in enhancing the soil environment despite a few limitations due to its lower surface energy. Nanomodified biochar combines the advantages of biochar and nanoscale materials. However, its effects on water infiltration and N leaching in a clayey soil remain unclear. Therefore, this study prepared rice straw nano-biochar by a ball milling method, and investigated its physicochemical properties and effects of bulk biochar and nano-biochar at various addition rates (0 %, 0.5 %, 1 %, 2 %, 3 %, and 5 %) on wetting peak migration, cumulative infiltration, water absorption and retention, and N leaching. The results showed that, compared with bulk biochar, nano-biochar presented a more abundant pore structure with an increase in specific surface area of approximately 1.5 times, accompanied by a 20 % increase in acid functional groups. Compared with those for clayey soil without biochar addition, the wetting front migration time was increased by 10.2 %-123.9 % and 17.0 %-257.9 %, and the cumulative infiltration volume at 60 min was decreased by 26.0 %-48.4 % and 14.1 %-62.4 % for bulk biochar and nano-biochar, respectively. The parameter S of Philip model and the parameter a of Kostiakov model for nano-biochar were lower than those for bulk biochar, whereas the parameter b of Kostiakov model was greater, indicating that nano-biochar decreased initial soil infiltration rate and increased attenuation degree of the infiltration rate. Nano-biochar increased water absorption by 8.03 % and subsequently enhanced water retention capacity relative to bulk biochar. In addition, bulk biochar and nano-biochar reduced NH4+-N leaching by 3.0 %-13.1 % and 5.7 %-39.2 %, respectively, and NO3--N leaching by 2.7 %-3.6 % and 9.0 %-43.3 %, respectively, by decreasing N concentration and leachate volume relative to those with no biochar addition. This study provides new knowledge for nano-biochar application in a clayey soil.

Integration of Digestate-Derived Biochar into the Anaerobic Digestion Process through Circular Economic and Environmental Approaches-A Review

The growing energy consumption and the need for a circular economy have driven considerable interest in the anaerobic digestion (AD) of organic waste, offering potential solutions through biogas and digestate production. AD processes not only have the capability to reduce greenhouse gas emissions but also contribute to the production of renewable methane. This comprehensive review aims to consolidate prior research on AD involving different feedstocks. The principles of AD are explored and discussed, including both chemical and biological pathways and the microorganisms involved at each stage. Additionally, key variables influencing system performance, such as temperature, pH, and C/N ratio are also discussed. Various pretreatment strategies applied to enhance biogas generation from organic waste in AD are also reviewed. Furthermore, this review examines the conversion of generated digestate into biochar through pyrolysis and its utilization to improve AD performance. The addition of biochar has demonstrated its efficacy in enhancing metabolic processes, microorganisms (activity and community), and buffering capacity, facilitating Direct Interspecies Electron Transfer (DIET), and boosting CH4 production. Biochar also exhibits the ability to capture undesirable components, including CO2, H2S, NH3, and siloxanes. The integration of digestate-derived biochar into the circular economy framework emerges as a vital role in closing the material flow loop. Additionally, the review discusses the environmental benefits derived from coupling AD with pyrolysis processes, drawing on life cycle assessment investigations. Techno-economic assessment (TEA) studies of the integrated processes are also discussed, with an acknowledgment of the need for further TEA to validate the viability of integrating the biochar industry. Furthermore, this survey examines the techno-economic and environmental impacts of biochar production itself and its potential application in AD for biogas generation, aiming to establish a more cost-effective and sustainable integrated system.

Investigating polyurethane foam loaded with high-z nanoparticles for gamma radiation shielding compared to Monte Carlo simulations

Since the beginning of research into radiation and protection against it, the importance of searching for proper materials against radiation hazards has been recognized. Gamma radiation protection materials usually deal with heavy elements with high prices, which are hard to maintain. Polyurethane-based (PU) materials are popular in sound and thermal insulation due to, their low-weight properties and, most importantly, fast and convenient construction ingredients. PU foams (PUF) can be used as radiation shield and noise and heat resistance due to their approachability, light-weight, high resistance, and comfortable construction. This study involved simulation and an experiment to construct and investigate the properties of Polyurethane material doped with lead oxide as a gamma shield. The shield was considered in several weight fractions of lead, yielding several samples. The MCNPX 2.6 Monte Carlo code has been utilized for simulation procedure, and 137Cs was employed as the gamma source in both simulation and experiment. The results offer a promising response against the gamma radiation and are suitable for attenuating gamma rays.

A systematic review of biochar aging and the potential eco-environmental risk in heavy metal contaminated soil

Biochar is widely accepted as a green and effective amendment for remediating heavy metals (HMs) contaminated soil, but its long-term efficiency and safety changes with biochar aging in fields. Currently, some reviews have qualitatively summarized biochar aging methods and mechanisms, aging-induced changes in biochar properties, and often ignored the potential eco-environmental risk during biochar aging process. Therefore, this review systematically summarizes the study methods of biochar aging, quantitatively compares the effects of different biochar aging process on its properties, and discusses the potential eco-environmental risk due to biochar aging in HMs contaminated soil. At present, various artificial aging methods (physical aging, chemical aging and biological aging) rather than natural field aging have been applied to study the changes of biochar's properties. Generally, biochar aging increases specific surface area (SSA), pore volume (PV), surface oxygen-containing functional group (OFGs) and O content, while decreases pH, ash, H, C and N content. Chemical aging method has a greater effect on the properties of biochar than other aging methods. In addition, biochar aging may lead to HMs remobilization and produce new types of pollutants, such as polycyclic aromatic hydrocarbons (PAHs), environmentally persistent free radicals (EPFRs) and colloidal/nano biochar particles, which consequently bring secondary eco-environmental risk. Finally, future research directions are suggested to establish a more accurate assessment method and model on biochar aging behavior and evaluate the environmental safety of aged biochar, in order to promote its wider application for remediating HMs contaminated soil.

Sugarcane bagasse biochar boosts maize growth and yield in salt-affected soil by improving soil enzymatic activities

Salinization is a leading threat to soil degradation and sustainable crop production. The application of organic amendments could improve crop growth in saline soil. Thus, we assessed the impact of sugarcane bagasse (SB) and its biochar (SBB) on soil enzymatic activity and growth response of maize crop at three various percentages (0.5%, 1%, and 2% of soil) under three salinity levels (1.66, 4, and 8 dS m-1). Each treatment was replicated three times in a completely randomized block design with factorial settings. The results showed that SB and SBB can restore the impact of salinization, but the SBB at the 2% addition rate revealed promising results compared to SB. The 2% SBB significantly enhanced shoot length (23.4%, 26.1%, and 41.8%), root length (16.8%, 20.8%, and 39.0%), grain yield (17.6%, 25.1%, and 392.2%), relative water contents (11.2%, 13.1%, and 19.2%), protein (17.2%, 19.6%, and 34.9%), and carotenoid (16.3, 30.3, and 49.9%) under different salinity levels (1.66, 4, and 8 dS m-1, respectively). The 2% SBB substantially drop the Na+ in maize root (28.3%, 29.9%, and 22.4%) and shoot (36.1%, 37.2%, and 38.5%) at 1.66, 4, and 8 dS m-1. Moreover, 2% SBB is the best treatment to boost the urease by 110.1%, 71.7%, and 91.2%, alkaline phosphatase by 28.8%, 38.8%, and 57.6%, and acid phosphatase by 48.4%, 80.1%, and 68.2% than control treatment under 1.66, 4 and 8 dS m-1, respectively. Pearson analysis showed that all the growth and yield parameters were positively associated with the soil enzymatic activities and negatively correlated with electrolyte leakage and sodium. The structural equational model (SEM) showed that the different application percentage of amendments significantly influences the growth and physiological parameters at all salinity levels. SEM explained the 81%, 92%, and 95% changes in maize yield under 1.66, 4, and 8 dS m-1, respectively. So, it is concluded that the 2% SBB could be an efficient approach to enhance the maize yield by ameliorating the noxious effect of degraded saline soil.

Versatile Hyper-Cross-Linked Polymers Derived from Waste Polystyrene: Synthesis, Properties, and Intentional Recycling

Waste polystyrene contributes considerably to environmental pollution due to its persistent nature, prompting a widespread consensus on the urgent need for viable recycling solutions. Owing to the aromatic groups structure of polystyrene, hyper-cross-linked polymers can be synthesized through the Friedel-Crafts cross-linking reaction using Lewis acids as catalysts. In addition, hyper-cross-linked polystyrene and its carbonaceous counterparts can be used in several important applications, which helps in their efficient recycling. This review systematically explores methods for preparing multifunctional hyper-cross-linked polymers from waste polystyrene and their applications in sustainable recycling. We have comprehensively outlined various synthetic approaches for these polymers and investigated their physical and chemical properties. These multifunctional polymers not only exhibit structural flexibility but also demonstrate diversity in performance, making them suitable for various applications. Through a systematic examination of synthetic methods, we showcase the cutting-edge positions of these materials in the field of hyper-cross-linked polymers. Additionally, we provide in-depth insights into the potential applications of these hyper-cross-linked polymers in intentional recycling, highlighting their important contributions to environmental protection and sustainable development. This research provides valuable references to the fields of sustainable materials science and waste management, encouraging further exploration of innovative approaches for the utilization of discarded polystyrene.

Uptake, translocation, and nutrient efficiency of nano-bonechar as a plant growth regulator in hydroponics and soil systems

The use of nanotechnology in terms of nanoparticles, carbon nanotubes, and quantum dots, when exposed to the plants, helps increase their productivity. It is worth the effort to comprehend the fate of these nanoparticles in plants. Bonechar derived from bones is a rich source of C, P, Ca2+, and Mg2+ nutrients, which can significantly contribute to the growth of the plants. This study focused on the uptake of nano-bonechar (NBC) in the Syngonium podophyllum plant, and its effects on plant growth under hydroponics and soil systems. The compound microscopy and SEM-EDX results confirmed the presence of NBC in the leaves and roots of the plants in hydroponics and soil systems. The FTIR spectra reflected the presence of functional groups of the NBC in the leaves of the Syngonium podophyllum plant. The plant's growth parameters showed an increase in fresh weight, dry weight, shoot length, chlorophyll content, leaf count, total Ca2+, total PO43-, and total organic carbon of plants in both systems. The NBC not just improved plant physiochemical parameters but also built up the soil quality in terms of bioavailable Ca2+, PO43-, water holding capacity, and soil organic matter. It is concluded that the production of carbon-based NBC not only helps manage bone waste but also their efficient uptake in plants significantly improving plant productivity.

Synthesis, delineation and technological advancements of algae biochar for sustainable remediation of the emerging pollutants from wastewater-a review

The use of algae for value-added product and biorefining applications is enchanting attention among researchers in recent years due to its remarkable photosynthetic ability, adaptability, and capacity to accumulate lipids and carbohydrates. Algae biomass, based on its low manufacturing costs, is relatively renewable, sustainable, environmentally friendly and economical in comparison with other species. High production rate of algae provides a unique opportunity for its conversion to biochar with excellent physicochemical properties, viz. high surface area and pore volume, high adsorption capacity, abundant functional groups over surface, etc. Despite several potential algal-biochar, a detailed study on its application for removal of emerging contaminants from wastewater is limited. Therefore, this technical review is being carried out to evaluate the specific elimination of inorganic and organic pollutants from wastewater, with a view to assessing adsorption performances of biochar obtained from various algae species. Species-specific adsorption of emerging pollutants from wastewater have been discussed in the present review. The promising methods like pyrolysis, gasification, dry and wet torrefaction for the production of algae biochar are highlighted. The strategies include chemical and structural modifications of algae biochar for the removal of toxic contaminants have also been considered in the current work. The overall aim of this review is to confer about the synthesis, technological advancements, delineation and application of algae biochar for the treatment of wastewater.

Conversion of locally available materials to biochar and activated carbon for drinking water treatment

For environmental sustainability and to achieve sustainable development goals (SDGs), drinking water treatment must be done at a reasonable cost with minimal environmental impact. Therefore, treating contaminated drinking water requires materials and approaches that are inexpensive, produced locally, and effortlessly. Hence, locally available materials and their derivatives, such as biochar (BC) and activated carbon (AC) were investigated thoroughly. Several researchers and their findings show that the application of locally accessible materials and their derivatives are capable of the adsorptive removal of organic and inorganic contaminants from drinking water. The application of locally available materials such as lignocellulosic materials/waste and its thermo-chemically derived products, including BC and AC were found effective in the treatment of contaminated drinking water. Thus, this review aims to thoroughly examine the latest developments in the use of locally accessible feedstocks for tailoring BC and AC, as well as their features and applications in the treatment of drinking water. We attempted to explain facts related to the potential mechanisms of BC and AC, such as complexation, co-precipitation, electrostatic interaction, and ion exchange to treat water, thereby achieving a risk-free remediation approach to polluted water. Additionally, this research offers guidance on creating efficient household treatment units based on the health risks associated with customized adsorbents and cost-benefit analyses. Lastly, this review work discusses the current obstacles for using locally accessible materials and their thermo-chemically produced by-products to purify drinking water, as well as the necessity for technological interventions.

Evaluation of Advanced Nanomaterials for Cancer Diagnosis and Treatment

Cancer is a persistent global disease and a threat to the human species, with numerous cases reported every year. Over recent decades, a steady but slowly increasing mortality rate has been observed. While many attempts have been made using conventional methods alone as a theragnostic strategy, they have yielded very little success. Most of the shortcomings of such conventional methods can be attributed to the high demands of industrial growth and ever-increasing environmental pollution. This requires some high-tech biomedical interventions and other solutions. Thus, researchers have been compelled to explore alternative methods. This has brought much attention to nanotechnology applications, specifically magnetic nanomaterials, as the sole or conjugated theragnostic methods. The exponential growth of nanomaterials with overlapping applications in various fields is due to their potential properties, which depend on the type of synthesis route used. Either top-down or bottom-up strategies synthesize various types of NPs. The top-down only branches out to one method, i.e., physical, and the bottom-up has two methods, chemical and biological syntheses. This review highlights some synthesis techniques, the types of nanoparticle properties each technique produces, and their potential use in the biomedical field, more specifically for cancer. Despite the evident drawbacks, the success achieved in furthering nanoparticle applications to more complex cancer stages and locations is unmatched.

Definitive Review of Nanobiochar

Nanobiochar is an advanced nanosized biochar with enhanced properties and wide applicability for a variety of modern-day applications. Nanobiochar can be developed easily from bulk biochar through top-down approaches including ball-milling, centrifugation, sonication, and hydrothermal synthesis. Nanobiochar can also be modified or engineered to obtain "engineered nanobiochar" or biochar nanocomposites with enhanced properties and applications. Nanobiochar provides many fold enhancements in surface area (0.4-97-times), pore size (0.1-5.3-times), total pore volume (0.5-48.5-times), and surface functionalities over bulk biochars. These enhancements have given increased contaminant sorption in both aqueous and soil media. Further, nanobiochar has also shown catalytic properties and applications in sensors, additive/fillers, targeted drug delivery, enzyme immobilization, polymer production, etc. The advantages and disadvantages of nanobiochar over bulk biochar are summarized herein, in detail. The processes and mechanisms involved in nanobiochar synthesis and contaminants sorption over nanobiochar are summarized. Finally, future directions and recommendations are suggested.

Chromium immobilization from wastewater via iron-modified hydrochar: Different iron fabricants and practicality assessment

The recycling of industrial solid by-products such as red mud (RM) has become an urgent priority, due to their large quantities and lack of reutilization methods can lead to resource wastage. In this work, RM was employed to fabricate green hydrochar (HC) to prepare zero-valent iron (ZVI) modified carbonous materials, and conventional iron salts (IS, FeCl3) was applied as comparison, fabricated HC labeled as RM/HC and IS/HC, respectively. The physicochemical properties of these HC were comprehensively characterized. Further, hexavalent chromium (Cr(VI)) removal performance was assessed (375.66 and 337.19 mg/g for RM/HC and IS/HC, respectively). The influence of dosage and initial pH were evaluated, while isotherms, kinetics, and thermodynamics analysis were also conducted, to mimic the surface interactions. The stability and recyclability of adsorbents also verified, while the practical feasibility was assessed by bok choy-planting experiment. This work revealed that RM can be used as a high value and green fabricant for HC the effective removal of chromium contaminants from the wastewater.

Adsorption of phosphate onto agricultural waste biochars with ferrite/manganese modified-ball-milled treatment and its reuse in saline soil

Agricultural waste biochar was widely used to absorb phosphorus (P) from eutrophicated water and soil remediation. However, the research on the reuse of the sorbed P on biochar in infertile saline soil is insufficient. Biochars derived from four kinds of agricultural wastes (cotton straws from two origins, maize stalk, and rice husk) were modified and applied to adsorb phosphate in waste water and then be reused in saline soil in this study. The co-modified method combining ball milling and metal coated treatment obtained the higher specific surface area (SSA) of ferrite/manganese modified-ball-milled biochars (Fe/Mn-BMBCs) (226.5-331.5 m2 g-1) than that of pristine biochars (14.02-30.35 m2 g-1) and ferrite/manganese modified biochar (Fe/Mn-BC) (223.7 m2 g-1), which could improve the pore structure of metal modified biochar. The phosphate adsorption capacity (qmax) of Fe/Mn-BMBCs with rich functional groups and high SSA were 44.0-53.8 mg g-1, which was 4.47-5.82 times higher than that of pristine biochars. Fe/Mn-BMBCs showed efficiently adsorption performance at low pH and high temperature. The application of BC to saline soil could promote the availability of P in saline soil. P-loaded biochars could afford P as a nutrient to promote the growth of lettuce (Lactuca sativa L.) in saline soil. The lettuce fresh weight in Fe/Mn-BMBC-P2 treated soil was 8.21 times higher than that grew in control check (CK) treatment. As a P element provider, P-loaded biochars not only improve saline soil fertility and crop productivity, but also convert the agricultural wastes and P in eutrophicated waters to the sustainable resource.

Dual valorization of coastal biowastes for tetracycline remediation and biomethane production: A composite assisted anaerobic digestion

Harnessing coastal biowaste for dual valorization in water treatment and biofuel production holds paramount importance for sustainability and resource challenges. This study investigated the potential of engineered composite (CABC) derived from coastal biowaste-based materials for tetracycline (TC) removal and biomethane production. High-yield calcium carbonate (CaCO3; 95.65%; bivalve shells) and biochar (GA-BC; 41.50%; green macroalgae) were produced and used as precursors for CABC. The characterization results revealed presence of β-CaCO3 and ν2-CO3 aragonite in CaCO3, and composite homogeneity was achieved. The CABC exhibited a maximum TC sorption capacity of 342.26 mg/g via synergistic sorption mechanisms (i.e., surface/pore filling, electrostatic attraction, calcium ion exchange, and chelation). Supplementation of anaerobic digestion process with GA-BC, CaCO3, and CABC was investigated via three consecutive cycles. Biochemical methane potential of glucose as a sole substrate was increased from 157.50 to 217.00, 187.00, and 259.00 mL-CH4, while dual substrate (glucose+TC) treatment was increased from 94.5 to 146.5, 129.0, and 153.00 mL-CH4 for GA-BC, CaCO3, and CABC, respectively. Moreover, system stability and TC removal were increased with the addition of GA-BC (40.90%), CaCO3 (16.30%), and CABC (53.70%). Therefore, this study exemplifies the circular bioeconomy approach, demonstrating the sustainable use of biowaste-derived composite for water treatment and biofuel production.

Pristine and modified biochar applications as multifunctional component towards sustainable future: Recent advances and new insights

Employing biomass for environmental conservation is regarded as a successful and environmentally friendly technique since they are cost-effective, renewable, and abundant. Biochar (BC), a thermochemically converted biomass, has a considerably lower production cost than the other conventional activated carbons. This material's distinctive properties, including a high carbon content, good electrical conductivity (EC), high stability, and a large surface area, can be utilized in various research fields. BC is feasible as a renewable source for potential applications that may achieve a comprehensive economic niche. Despite being an inexpensive and environmentally sustainable product, research has indicated that pristine BC possesses restricted properties that prevent it from fulfilling the intended remediation objectives. Consequently, modifications must be made to BC to strengthen its physicochemical properties and, thereby, its efficacy in decontaminating the environment. Modified BC, an enhanced iteration of BC, has garnered considerable interest within academia. Many modification techniques have been suggested to augment BC's functionality, including its adsorption and immobilization reliability. Modified BC is overviewed in its production, functionality, applications, and regeneration. This work provides a holistic review of the recent advances in synthesizing modified BC through physical, chemical, or biological methods to achieve enhanced performance in a specific application, which has generated considerable research interest. Surface chemistry modifications require the initiation of surface functional groups, which can be accomplished through various techniques. Therefore, the fundamental objective of these modification techniques is to improve the efficacy of BC contaminant removal, typically through adjustments in its physical or chemical characteristics, including surface area or functionality. In addition, this article summarized and discussed the applications and related mechanisms of modified BC in environmental decontamination, focusing on applying it as an ideal adsorbent, soil amendment, catalyst, electrochemical device, and anaerobic digestion (AD) promoter. Current research trends, future directions, and academic demands were available in this study.

Biochar modulating soil biological health: A review

Biochar can be used for multifunctional applications including the improvement of soil health and carbon storage, remediation of contaminated soil and water resources, mitigation of greenhouse gas emissions and odorous compounds, and feed supplementation to improve animal health. A healthy soil preserves microbial biodiversity that is effective in supressing plant pathogens and pests, recycling nutrients for plant growth, promoting positive symbiotic associations with plant roots, improving soil structure to supply water and nutrients, and ultimately enhancing soil productivity and plant growth. As a soil amendment, biochar assures soil biological health through different processes. First, biochar supports habitats for microorganisms due to its porous nature and by promoting the formation of stable soil micro-aggregates. Biochar also serves as a carbon and nutrient source. Biochar alters soil physical and chemical properties, creating optimum soil conditions for microbial diversity. Biochar can also immobilize soil pollutants and reduce their bioavailability that would otherwise inhibit microbial growth. However, depending on the pyrolysis settings and feedstock resources, biochar can be comprised of contaminants including polycyclic aromatic hydrocarbons and potentially toxic elements that can inhibit microbial activity, thereby impacting soil health.

Recent advances in nano-fertilizers: synthesis, crop yield impact, and economic analysis

The escalating global demand for food production has predominantly relied on the extensive application of conventional fertilizers (CFs). However, the increased use of CFs has raised concerns regarding environmental risks, including soil and water contamination, especially within cereal-based cropping systems. In response, the agricultural sector has witnessed the emergence of healthier alternatives by utilizing nanotechnology and nano-fertilizers (NFs). These innovative NFs harness the remarkable properties of nanoparticles, ranging in size from 1 to 100 nm, such as nanoclays and zeolites, to enhance nutrient utilization efficiency. Unlike their conventional counterparts, NFs offer many advantages, including variable solubility, consistent and effective performance, controlled release mechanisms, enhanced targeted activity, reduced eco-toxicity, and straightforward and safe delivery and disposal methods. By facilitating rapid and complete plant absorption, NFs effectively conserve nutrients that would otherwise go to waste, mitigating potential environmental harm. Moreover, their superior formulations enable more efficient promotion of sustainable crop growth and production than conventional fertilizers. This review comprehensively examines the global utilization of NFs, emphasizing their immense potential in maintaining environmentally friendly crop output while ensuring agricultural sustainability.

Applications and synergistic degradation mechanisms of nZVI-modified biochar for the remediation of organic polluted soil and water: A review

Increasing organic pollution in soil and water has garnered considerable attention in recent years. Nano zero-valent iron-modified biochar (nZVI/BC) has been proven to remediate the contaminated environment effectively due to its abundant active sites and unique reducing properties. This paper provides a comprehensive overview of the application of nZVI/BC in organic polluted environmental remediation and its mechanisms. Firstly, the review introduced primary synthetic methods of nZVI/BC, including in-situ synthesis (carbothermal reduction and green synthesis) and post-modification (liquid-phase reduction and ball milling). Secondly, the application effects of nZVI/BC were discussed in remediating soil and water polluted by antibiotics, pesticides, polycyclic aromatic hydrocarbons (PAHs), and dyes. Thirdly, this review explored the mechanisms of the adsorption and chemical degradation of nZVI/BC, and synergistic degradation mechanisms of nZVI/BC-AOPs and nZVI/BC-Microbial interactions. Fourth, the factors that influence the removal of organic pollutants using nZVI/BC were summarized, encompassing synthesis conditions (raw materials, pyrolysis temperature and aging of nZVI/BC) and external factors (reagent dosage, pH, and coexisting substances). Finally, this review proposed future challenges for the application of nZVI/BC in environmental remediation. This review offers valuable insights for advancing technology in the degradation of organic pollutants using nZVI/BC and promoting its on-site application.

Fabrication of Iron-Containing Biochar by One-Step Ball Milling for Cr(VI) and Tetracycline Removal from Wastewater

Simple ball milling technology can simultaneously improve the adsorption performance of adsorbents for heavy metals and organic pollutants and has attracted increasing attention. Iron-modified biochar (Fe@MBC) was prepared by one-step ball milling, and the characterization results proved that FeCl3 was successfully loaded on biochar. The removal rates of Cr(VI) and tetracycline hydrochloride (TC) by Fe@MBC were increased by 88.27% and 82.64% compared with BC. The average pore size, oxygen-containing functional groups and graphitization degree of Fe@MBC are higher than those of BC, which is more conducive to promoting adsorption. The adsorption isotherms show that the adsorption of Cr(VI) and TC on the Fe@MBC surface conforms to the Langmuir type of single-layer adsorption and the Freundlich model of multilayer adsorption, respectively. The maximum adsorption capacities of Cr(VI) and TC are 25.46 and 66.91 mg·g-1, respectively. Kinetic experiments show that the adsorption process is more consistent with the pseudo-second-order model of chemical adsorption. The adsorption process of Cr(VI) and TC on the Fe@MBC surface is a spontaneous endothermic process that becomes more obvious as the temperature increases. The increase in solution pH has a significant impact on the removal rate of Fe@MBC. When the pH value increased from 3 to 11, the adsorption rates decreased by 53.74% and 17.16%, respectively. The presence of PO43-, CO32-, K+, and Cu2+ significantly affects the adsorption of TC by Fe@MBC, and PO43- and CO32- also affect the adsorption of Cr(VI). Mechanistic studies show that ion exchange, electrostatic interaction, pore filling, and hydrogen bonding contribute to the removal of Cr(VI) and TC by Fe@MBC. The removal mechanism of Cr(VI) also involves complexation and redox reactions, and the removal mechanism of TC involves π-π bonds and van der Waals forces. The results show that Fe@MBC is a green and efficient adsorbent.

Waste-derived nanobiochar: A new avenue towards sustainable agriculture, environment, and circular bioeconomy

The greatest challenge for the agriculture sector in the twenty-first century is to increase agricultural production to feed the burgeoning global population while maintaining soil health and the integrity of the agroecosystem. Currently, the application of biochar is widely implemented as an effective means for boosting sustainable agriculture while having a negligible influence on ecosystems and the environment. In comparison to traditional biochar, nano-biochar (nano-BC) boasts enhanced specific surface area, adsorption capacity, and mobility properties within soil, allowing it to promote soil properties, crop growth, and environmental remediation. Additionally, carbon sequestration and reduction of methane and nitrous oxide emissions from agriculture can be achieved with nano-BC applications, contributing to climate change mitigation. Nonetheless, due to cost-effectiveness, sustainability, and environmental friendliness, waste-derived nano-BC may emerge as the most viable alternative to conventional waste management strategies, contributing to the circular bioeconomy and the broader goal of achieving the Sustainable Development Goals (SDGs). However, it's important to note that research on nano-BC is still in its nascent stages. Potential risks, including toxicity in aquatic and terrestrial environments, necessitate extensive field investigations. This review delineates the potential of waste-derived nano-BC for sustainable agriculture and environmental applications, outlining current advancements, challenges, and possibilities in the realms from a sustainability and circular bioeconomy standpoint.

Nano-biochar uptake and translocation by plants: Assessing environmental fate and food chain risk

Nano-biochar (N-BC) is an emerging nanomaterial with potential applications in various fields. Understanding its behavior in the environment and its interaction with plants is crucial for assessing its ecological implications and potential risks to the food chain. In this study, we investigated the absorption and transportation of N-BC by wheat and Chinese cabbage plants using microscopy techniques and stable isotope analysis. Our results revealed that N-BC particles were readily absorbed by the plants through their root systems and transported to the aboveground tissues. Scanning electron microscopy and transmission electron microscopy provided visual evidence of N-BC particles inside the plants, predominantly located in the xylem and cell walls of the cortical tissue. Stable isotope analysis confirmed the uptake and transportation of N-BC, with elevated isotopic values observed in the plant tissues exposed to 13C-N-BC. Our results demonstrated that around 50.2 %-52.4 % of the absorbed N-BC by plants was accumulated in the roots of wheat and Chinese cabbage, and the remaining fraction was transferred to the shoots including steam (31.0 %-32.1 %) and leaf (16.5 %-17.6 %). Importantly, we observed significant accumulation of N-BC in the edible parts of Chinese cabbage, raising concerns about its potential entry into the food chain and associated health risks. These findings highlight the need for further research to explore the specific pathways and modes of N-BC uptake and transport in plants. Monitoring the presence of N-BC in the environment and its potential impact on the food chain is crucial for ensuring food security and safeguarding human health.

Ruminal content biochar supplementation for enhanced biomethanation of rice straw: Focusing on biochar characterization and dose optimization

Anaerobic digestion (AD) of agricultural wastes is a promising approach for energy recovery and crop residue management. However, its recalcitrant chemical structure hinders microbial hydrolysis and reduces biomethane production under AD. Biochar supplementation has been proven to promote the digestibility and biomethanation of lignocellulosic substrates. Therefore, this study investigated the influence of different pyrolysis temperatures (450 °C, 550 °C, and 650 °C) on the physicochemical properties of biochar. Furthermore, the impact of ruminal content biochar supplementation (1 %, 2 %, and 3 %) on the AD of rice straw with rumen fluid as inoculum has been investigated. The ruminal content biochar (RUCB) supplemented reactors showed an increment in biomethane yield and the highest cumulative biomethane yield 243.11 mL/g volatile solids (VS)) was recorded at 2 % RUCB supplementation, followed by 227.12 mL/g VS at 1 % RUCB supplementation and 162.86 mL/g VS at 3 % RUCB supplementation (P > 0.05). Compared to the control reactors (128.68 mL/g VS), RUCB supplemented reactors exhibited 1.88-fold, 1.76-fold, and 1.26-fold increments in biomethane yield due to pH stabilization and facilitation of microbial biofilm formation on the biochar. The correlation analysis showed that biomethane production is positively correlated with VS reduction (R2 = 0.9852). This study proposed a potential strategy to utilize ruminal content waste as a feedstock for biochar production and its application in AD for accelerating the biomethanation of rice straw.

A critical review of sustainable application of biochar for green remediation: Research uncertainty and future directions

Biochar, a carbon-rich material produced from the pyrolysis of organic biomass, has gained significant attention as a potential solution for sustainable green remediation practices. Several studies analyze biomass-derived biochar techniques and environmental applications, but comprehensive assessments of biochar limitations, uncertainty, and future research directions still need to be improved. This critical review aims to present a comprehensive analysis of biochar's efficacy in environmental applications, including soil, water, and air, by sequentially addressing its preparation, application, and associated challenges. The review begins by delving into the diverse methods of biochar production, highlighting their influence on physical and chemical properties. This review explores the diverse applications of biochar in remediating contaminated soil, water, and air while emphasizing its sustainability and eco-friendly characteristics. The focus is on incorporating biochar as a remediation technique for pollutant removal, sequestration, and soil improvement. The review highlights the promising results obtained from laboratory-scale experiments, field trials, and case studies, showcasing the effectiveness of biochar in mitigating contaminants and restoring ecosystems. The environmental benefits and challenges of biochar production, characterization, and application techniques are critically discussed. The potential synergistic effects of combining biochar with other remediation methods are also explored to enhance its efficacy. A rigorous analysis of the benefits and drawbacks of biochar for diverse environmental applications in terms of technical, environmental, economic, and social issues is required to support the commercialization of biochar for large-scale uses. Finally, future research directions and recommendations are presented to facilitate the development and implementation of biochar-based, sustainable green remediation strategies.

Mechanochemical synthesis of calcium-biochar for decontamination of arsenic-containing acid mine drainage

Ca-biochar is an efficient material for As(III)-containing acid mine drainage (AMD) decontamination, while it is challenging to fabricate Ca-biochar with oyster shell waste as the Ca source due to its complex structure. Herein, a mechanochemical method was proposed to activate oyster shell waste and wood waste for Ca-biochar design and production, and its efficacy and relevant mechanisms for AMD detoxification were evaluated. The smaller size Ca-biochar produced by the medium-speed ball milling showed a higher As(III) removal (74.0 %) compared to high-speed ball milling (60.9 %), attributed to the formation of finer Ca(OH)2 while avoiding particle aggregation, which could release more Ca (89.0 mg/g) and alkalinity for the co-precipitation of As. Meanwhile, wood-based biochar substrate served as a platform for co-precipitation, and its surface functionality supported the oxidative immobilization of As. This study presents a promising route for upcycling food and wood waste to produce Ca-biochar for AMD decontamination.

On the adsorption characteristics and mechanism of methylene blue by ball mill modified biochar

In this study, modified biochar (BRB) was prepared from rice straw by ball milling technique and used for the adsorption of methylene blue (MB) in wastewater. The BRB was characterized by SEM, FTIR and XPS, and the adsorption model and Box-Behnken design were used to optimize the five influencing factors. The results showed that the ball milling technique could increase the content of functional groups (-OH, C=C and C-O, etc.) and aromatic structures on the surface of biochar, thus facilitating the removal of MB. The isotherm model was consistent with the Langmuir adsorption model (R2 = 0.947) and the maximum adsorption capacity was 50.27 mg/g. The adsorption kinetics was consistent with the pseudo-second-order kinetic model (R2 = 1) and the adsorption rate was mainly controlled by chemisorption. The thermodynamic model confirmed that the adsorption process was a spontaneous heat absorption reaction. The maximum adsorption efficiency was 99.78% under the optimal conditions (40℃, pH 8, reaction time = 90 min, dosing amount = 0.1 mg), and the adsorption efficiency could be improved by increasing the pH and BRB dosing amount. The surface functional groups and crystal structure properties of BRB were the main determinants of adsorption, and it was clarified that physical adsorption, electrostatic attraction and π-π interaction were the main mechanisms for the adsorption of MB by BRB. The main mechanisms were clarified. Therefore, BRB is an economic, efficient and green adsorption material with good potential for the removal of dye pollutants in the aqueous environment.

Comprehensive review on lignocellulosic biomass derived biochar production, characterization, utilization and applications

Biochar is an ample source of organic carbon prepared by the thermal breakdown of biomass. Lignocellulosic biomass is a promising precursor for biochar production, and has several applications in various industries. In addition, biochar can be applied for environmental revitalization by reducing the negative impacts through intrinsic mechanisms. In addition to its environmentally friendly nature, biochar has several recyclable and inexpensive benefits. Nourishing and detoxification of the environment can be undertaken using biochar by different investigators on account of its excellent contaminant removal capacity. Studies have shown that biochar can be improved by activation to remove toxic pollutants. In general, biochar is produced by closed-loop systems; however, decentralized methods have been proven to be more efficient for increasing resource efficiency in view of circular bio-economy and lignocellulosic waste management. In the last decade, several studies have been conducted to reveal the unexplored potential and to understand the knowledge gaps in different biochar-based applications. However, there is still a crucial need for research to acquire sufficient data regarding biochar modification and management, the utilization of lignocellulosic biomass, and achieving a sustainable paradigm. The present review has been articulated to provide a summary of information on different aspects of biochar, such as production, characterization, modification for improvisation, issues, and remediation have been addressed.

Enhanced methane oxidation efficiency by digestate biochar in landfill cover soil: Microbial shifts and carbon metabolites insights

The ability of biochar to enhance the oxidation of methane (CH4) in landfill cover soil by promoting the growth and activity of methane-oxidizing bacteria (MOB) has attracted significant attention. However, the optimal characteristics of digestate-derived biochar (DBC) for promoting the MOB community and CH4 removal performance remain unclear. This study examined how the CH4 oxidation capacity and respiratory metabolism of MOB life process are affected by the application of DBC compared with the most commonly used woody-derived biochar (WBC). The addition of both WBC and DBC enhanced CH4 oxidation, with DBC exhibiting a nearly twofold increase in cumulative CH4 oxidation mass (7.14 mg CH4 g-1) compared to WBC. The high ion-exchange capacity of DBC was found to be more favorable for the growth of Type I MOB, which have more efficient metabolic pathways for CH4 oxidation. Type I MOB which are abundant in DBC may prefer monovalent positive ions, while the charge-rich nature of DBC may also have hindered extracellular protein aggregation. The superiority of DBC in terms of CH4 oxidation thus highlights the underlying mechanisms of biochar-MOB interactions, offering potential biochar options for landfill cover soil.

Facile solvent-free modified biochar for removal of mixed steroid hormones and heavy metals: isotherm and kinetic studies

Water contamination has become a global challenge to human survival. Non-biodegradable heavy metal cations and steroid hormones could accumulate in the human body and could result in serious health problems. In this study, we prepared biochar from waste shells of African star apples and modified biochar using a solvent-free ball milling facile method. The X-ray photoelectron spectrometer (XPS) and Fourier transform infrared spectroscopy (FTIR) analysis revealed biochar functional groups in C=C, C-O, and C=O. Brunauer Emmett Teller (BET) was used to determine the surface area, the surface area of ball-milled biochar obtained at 550 °C (BASA550) increased from 174 m2/g to 304 m2/g after modification. The Langmuir and Freundlich adsorption isotherms best described the experimental adsorption data with RL < 1 and 1/n < 1 and a high degree of agreement of R2 data; Langmuir (R2 = 0.9291-0.9992) and Freundlich (R2 = 0.9077-0.9974). The adsorption kinetic studies using pseudo-first-order and pseudo-second-order models revealed that the pseudo-second-order model accurately described the adsorption process). The application of the BASA550 for treating wastewater samples showed a good percentage of removal. The removal percentage for cadmium, nickel, and lead was recorded as 92.96%, 90.89%, and 90.29%, respectively. The percentage removal in the influent and effluent were found to be 85.06%, 83.87%, 84.73%, and 89.37%, 86.48%, and 87.40%, respectively. The maximum percentage removal of steroid hormones from ultrapure water ranged from 84.20 to 89.63%, while from the spiked effluent and influent the percentage removal of 78.91-87.81% and 73.58-84.51% were obtained. The reusability of the ball-milled biochar was investigated and the result showed that the adsorbent (BASA550) had a good reusability potential for the first four cycles.

Occurrence, toxicity, impact and removal of selected non-steroidal anti-inflammatory drugs (NSAIDs): A review

Non-steroidal anti-inflammatory drugs (NSAIDs) are among the most frequently used pharmaceuticals for human therapy, pet therapeutics, and veterinary feeds, enabling them to enter into water sources such as wastewater, soil and sediment, and seawater. The control of NSAIDs has led to the advent of the novel materials for treatment techniques. Herein, we review the occurrence, impact and toxicity of NSAIDs against aquatic microorganisms, plants and humans. Typical NSAIDs, e.g., ibuprofen, ketoprofen, diclofenac, naproxen and aspirin were detected at high concentrations in wastewater up to 2,747,000 ng L-1. NSAIDs in water could cause genotoxicity, endocrine disruption, locomotive disorders, body deformations, organs damage, and photosynthetic corruption. Considering treatment methods, among adsorbents for removal of NSAIDs from water, metal-organic frameworks (10.7-638 mg g-1) and advanced porous carbons (7.4-400 mg g-1) were the most robust. Therefore, these carbon-based adsorbents showed promise in efficiency for the treatment of NSAIDs.