A review on nitrogen dynamics and mitigation strategies of food waste digestate composting

Destabilization mechanisms of Semi-aerobic aged refuse biofilters under harsh treatment conditions: Evidence from fluorescence and microbial characteristics

Semi-aerobic aged refuse biofilters (SAARB) are commonly-used biotechnologies for treating landfill leachate. In actual operation, SAARB often faces harsh conditions characterized by high concentrations of chemical oxygen demand (COD) and Cl-, as well as a low carbon-to-nitrogen ratio (C/N), which can disrupt the microbial community within SAARB, leading to operational instability. Maintaining the stable operation of SAARB is crucial for the efficient treatment of landfill leachate. However, the destabilization mechanism of SAARB under harsh conditions remains unclear. To address this, the study simulated the operation of SAARB under three harsh conditions, namely, high COD loading (H-COD), high chloride ion (Cl-) concentration environment (H-Cl-), and low C/N ratio environment (L-C/N). The aim is to reveal the destabilization mechanism of SAARB under harsh conditions by analyzing the fluorescence characteristics of effluent DOM and the microbial community in aged refuse. The results indicate that three harsh conditions have different effects on SAARB. H-COD leads to the accumulation of proteins; H-Cl- impedes the reduction of nitrite nitrogen; L-C/N inhibits the degradation of humic substances. These outcomes are attributed to the specific effects of different factors on the microbial communities in different zones of SAARB. H-COD and L-C/N mainly affect the degradation of organic matter in aerobic zone, while H-Cl- primarily impedes the denitrification process in the anaerobic zone. The abnormal enrichment of Corynebacterium, Castellaniella, and Sporosarcina can indicate the instability of SAARB under three harsh conditions, respectively. To maintain the steady operation of SAARB, targeted acclimation of the microbial community in SAARB should be carried out to cope with potentially harsh operating conditions. Besides, timely mitigation of loads should be implemented when instability characteristics emerge, and carbon sources and electron donors should be provided to restore treatment performance effectively.

Sustainable media feedstocks for cellular agriculture

The global food system is shifting towards cellular agriculture, a second domestication marked by cultivating microorganisms and tissues for sustainable food production. This involves tissue engineering, precision fermentation, and microbial biomass fermentation to establish food value chains independent of traditional agriculture. However, these techniques rely on growth media sourced from agricultural, chemical (fossil fuels), and mining supply chains, raising concerns about land use competition, emissions, and resource depletion. Fermentable sugars, nitrogen, and phosphates are key ingredients derived from starch crops, energy-intensive fossil fuel based processes, and finite phosphorus resources, respectively. This review explores sustainable alternatives to reduce land use and emissions associated with cellular agriculture media ingredients. Sustainable alternatives to first generation sugars (lignocellulosic substrates, sidestreams, and gaseous feedstocks), sustainable nitrogen sources (sidestreams, green ammonia, biological nitrogen fixation), and efficient use of phosphates are reviewed. Especially cellulosic sugars, gaseous chemoautotrophic feedstocks, green ammonia, and phosphate recycling are the most promising technologies but economic constraints hinder large-scale adoption, necessitating more efficient processes and cost reduction. Collaborative efforts are vital for a biotechnological future grounded in sustainable feedstocks, mitigating competition with agricultural land and emissions.

Hydrothermal-enhanced pyrolysis for efficient NOX reduction and biochar valorization from food waste digestate

Pyrolysis has emerged as a promising technology for valorizing digestate resulting from the anaerobic digestion of food waste. However, the high NOX emissions during pyrolysis limit its application. This study proposed a hydrothermal coupled pyrolysis process to control the element transfer in digestate during biochar production. The efficient reduction of NOX emissions and the improvement of biochar adsorbability were realized. The hydrothermal process reduced the nitrogen content in solid digestate by 49.10 %-81.79 %, thus reducing the NOX precursors in syngas and the N-containing substances in bio-oil. Additionally, the specific surface area and the total pore volume of biochar were enhanced from 25 m2/g to 60-73 m2/g and 0.06 cm3/g to 0.12-0.14 cm3/g, respectively. More defects, oxygen-containing functional groups, and doped Ca on the biochar resulted in a high phosphate removal efficiency of 94 %. The proposed technology provides an efficient and environmentally friendly way to utilize the digestate.

The bacterial community drive the humification and greenhouse gas emissions during plant residues composting under different aeration rates

This study investigated the effects of different aeration intensities on organic matter (OM) degradation, greenhouse gas emissions (GHG) as well as humification during plant residue composting. Three intermittent aeration intensities of 0.084 (Tlow), 0.19 (Tmedium) and 0.34 (Thigh) L min-1kg-1 DM with 30 min on/30 min off were conducted on a lab-scale composting experiment. Results showed that OM mineralization in Thigh was more evident than Tlow and Tmedium, resulting in the highest humic acid content. Humic acid content in Tmedium and Thigh was 15.7% and 18.5% higher than that in Tlow. The average O2 concentration was 4.9%, 9.5% and 13.6% for Tlow, Tmedium and Thigh. Compared with Tmedium and Thigh, Tlow reduced CO2 and N2O emissions by 18.3%-39.6% and 72.4%-63.9%, but the CH4 emission was highest in Tlow. But the total GHG emission was the lowest in Thigh. Linear Discriminant Analysis Effect Size analysis showed that the core bacteria within Tlow mainly belonged to Anaerolineaceae, which was significantly negatively correlated to the emission of CH4. Thermostaphylospora, Unclassified_Vicinamibacteraceae and Sulfurifustis were identified as core bacteria in Tmedium and Thigh, and these genus were significantly postively correlated to CO2 and N2O emissions. Redundancy analysis showed that total orgnic carbon, O2 and electrical conductivity were the key factors affecting the evolution of bacterial community.

Recent innovations in fertilization with treated digestate from food waste to recover nutrients for arid agricultural fields

This study aims to explore the development of sustainable fertilizers from waste materials of a biogas plant and a brewery. These wastes, rich in organic carbon and nitrogen, were processed with sulfuric(VI) and phosphoric(V) acid mixture, facilitating the production of free amino acids and achieving waste sanitization. This treatment produced by-products, which extended the range of possible applications. The highest concentration of free amino acids (360 mg/l) was achieved through hydrolyzing with a 40% concentration medium over 24 h. In this case, the maximum levels were recorded for beta-alanine (69.3 mg/l), glycine (46.8 mg/l), isoleucine (43.5 mg/l), proline (36.2 mg/l), and valine (31.5 mg/l). The study presents two fertilizer technologies, with and without micronutrients, that satisfy European Parliament Regulation 2019/1009 (Ntot > 2%, Norg > 0.5%, Corg > 3%). Bioavailability of nutrients in the formulations ranged from 60 to 100%. The efficacies of these fertilizers were evaluated in 30-day pot trials with various plant species, with both single application and fertigation tested. Multielement analysis confirmed high nutrient transfer in the soil-plant system, and the inclusion of micronutrients led to biofortification of plant biomass in Cu (48.3 ± 7.2 mg/kg), Mn (249 ± 37 mg/kg), Zn (164 ± 25 mg/kg), and Fe (211 ± 32 mg/kg). These sustainable fertilizers present an alternative to traditional, non-renewable fertilizers and offer promising solutions for precision agriculture and environmentally conscious production.

Vermicomposting technology as a dynamic strategy to mitigate environmental crisis: a bibliometric study of last three decades

Efficient recycling of resources forms the cornerstone of sustainable development. Among multiple options in stock for waste recycling, vermicomposting technology is regarded as a futuristic strategy, being tested in every part of the globe due to easy accessibility. Hence, a bibliometric study was planned to set a sight on global scientific trends encompassing vermicomposting research in last three decades. The data were retrieved from Google Scholar, Scopus and PubMed. Publications from different search engines were filtered out and 2064 unique documents were collected and illustrated in MS Excel and Vos-viewer. Inferences were drawn on significant aspects, such as publication growth trend, journal analysis and co-occurrence of keywords. The study revealed that the number of publications increased from 3 in 1992 to 166 in 2021. The number of citations also increased and peaked at 4314 in 2015. Following this, we clustered keywords using principle component analysis and worked out links between domains of vermicomposting. Vermicomposting conjoined to words substrate manipulation, quality improvement, heavy metal adsorption, and yield parameters. This implies that vermicompost is being explored for many alternate uses in addition to its use as a fertiliser. We concluded that vermicomposting is one of the promising technologies for waste recycling. It modulates plant growth and subdues stress in plants. Additionally, being an efficient adsorbent, it serves bioremediation of contaminated sites. Therefore, the future of this technology lies in synthesising nano-formulations, integrating into biosensor technology, simulating for predicting timelines under different conditions and making efforts to improve their adsorption.

Dynamic life cycle assessment of commercial and household food waste: A critical global review of emerging techniques

DLCA has been applied to several food waste streams, however, to date no critical assessment of its strengths, weaknesses, opportunities, and threats (SWOT) is available in the scientific literature. Accordingly, the present review aims to provide a comprehensive overview of the available literature on DLCA and its application to Household and Commercial Food Waste (HCFW) by providing critical assessment and perspectives for future research. The Population, Intervention, Comparison, and Outcome (PICO) framework for literature review was employed, with just 12 relevant studies identified between 1999 and 2022, highlighting a dearth of research on DLCA of food waste and the need for further research. Identified studies exhibit significant variations with respect to DLCA methodology, boundary settings, and data quality and reporting, with more attention typically given to combining conventional LCA with dynamic characterization models, thus making it difficult to draw conclusive findings or identify consistent trends. Additionally, most identified studies employed DLCA for a specific case study and comparison with traditional LCA outcomes was typically ignored; just one study presented the projected impact from both LCA and DLCA for the entire life cycle of a product. Employed functional/reference units ranged from specific quantities such as 1 kg of refined crystals or syrup, 1 g L-1 Sophorolipid solution, and 1 kg of dry food with packaging material, to broader indicators like 1 kg of biofuel or 1 MJ of primary energy. Monte Carlo simulation was the most frequently employed method for uncertainty analyses within identified studies. Sensitivity analyses were conducted in just 4 studies, but it was not always clearly reported. While DLCA is undoubtedly a more realistic approach to impact assessment, and thus likely more accurate, a need exists for increasingly standardized and regulated versions of DLCA for global and multi-criteria practices.

Machine-learning intervention progress in the field of organic waste composting: Simulation, prediction, optimization, and challenges

Aerobic composting stands as a widely-adopted method for treating organic solid waste (OSW), simultaneously producing organic fertilizers and soil amendments. This biologically-driven biochemical reaction process, however, presents challenges due to its complex non-linear metabolism and the heterogeneous nature of the solid medium. These characteristics inherently limit the simulation accuracy and efficiency optimization in aerobic composting. Recently, significant efforts have been made to simulate and control composting process parameters, as well as predicting and optimizing composting product quality. Notably, the integration of machine learning (ML) in aerobic composting of organic waste has garnered considerable attention for its applicability and predictive capability in exploring the complex non-linear relationships of organic waste composting parameters. Despite numerous studies on ML applications in OSW composting, a systematic review of research findings in this field is lacking. This study offers a systematic overview of the application level, current status, and versatility of ML in OSW composting. It spans various aspects, such as compost maturity, environmental pollutants, nutrients, moisture, heat loss, and microbial metabolism. The survey reveals that ML-intervention predominantly focuses on compost maturity and environmental pollutants, followed by nutrients, moisture, heat loss, and microbial activity. The most commonly employed predictive models and optimization algorithms are artificial neural networks (47%) and genetic algorithms (10%). These demonstrate high prediction accuracy and maximize composting efficiency in the simulation and prediction of organic waste composting, alongside regulation of key parameters. Deep neural networks and ensemble learning models prove effective in achieving superior predictive performance by selecting feature variables in compost maturity and pollutant residue prediction of organic waste composting in a simpler and more objective manner.

Semi-permeable membrane-covered high-temperature aerobic composting: A review

Semi-permeable membrane-covered high-temperature aerobic composting (SMHC) is a suitable technology for the safe treatment and disposal of organic solid waste as well as for improving the quality of the final compost. This paper presents a comprehensive summary of the impact of semi-permeable membranes centered on expanded polytetrafluoroethylene (e-PTFE) on compost physicochemical properties, carbon and nitrogen transformations, greenhouse gas emission reduction, microbial community succession, antibiotic removal, and antibiotic resistance genes migration. It is worth noting that the semi-permeable membrane can form a micro-positive pressure environment under the membrane, promote the uniform distribution of air in the heap, reduce the proportion of anaerobic area in the heap, improve the decomposition rate of organic matter, accelerate the decomposition of compost and improve the quality of compost. In addition, this paper presents several recommendations for future research areas in the SMHC. This investigation aims to guide for implementation of semi-permeable membranes in high-temperature aerobic fermentation processes by systematically compiling the latest research progress on SMHC.

Periodic injection of liquefied kitchen and food waste in municipal solid waste: Effects on leachate and gas generation

With continuous advancements in the zero-waste strategy in China, transportation of fresh municipal solid waste to landfills has ceased in most first-tier cities. Consequently, the production of landfill gas has sharply declined because the supply of organic matter has decreased, rendering power generation facilities idle. However, by incorporating liquefied kitchen and food waste (LKFW), sustainable methane production can be achieved while consuming organic wastewater. In this study, LKFW and water (as a control group) were periodically injected into high and low organic wastes, respectively. The biochemical characteristics of the resulting gas and leachate were analyzed. LKFW used in this research generated 19.5-37.6 L of methane per liter in the post-methane production phase, highlighting the effectiveness of LKFW injection in enhancing the methane-producing capacity of the system. The release of H2S was prominent during both the rapid and post-methane production phases, whereas that of NH3 was prominent in the post-methane production phase. As injection continued, the concentrations of chemical oxygen demand, 5-d biological oxygen demand, total organic carbon, ammonia nitrogen, total nitrogen, and oil in the output leachate decreased and eventually reached levels comparable to those in the water injection cases. After nine rounds of injections, the biologically degradable matter of the two LKFW-injected wastes decreased by 8.2 % and 15.1 %, respectively. This study sheds light on determining the organic load, controlling odor, and assessing the biochemical characteristics of leachate during LKFW injection.

Effects of aeration modes and rates on nitrogen conversion and bacterial community in composting of dehydrated sludge and corn straw

Aeration is an important factor to regulate composting efficiency and nitrogen loss. This study is aimed to compare the effects of different aeration modes (continuous and intermittent) and aeration rate on nitrogen conversion and bacterial community in composting from dehydrated sludge and corn straw. Results showed that the intermittent aeration mode at same aeration volume was superior to the continuous aeration mode in terms of NH3 emission reduction, nitrogen conversion and germination index (GI) improvement. Intermittent aeration mode with 1200 L/h (aeration 5 min, stop 15 min) [K5T15 (V1200)] and 300 L/h of continuous aeration helped to the conservation of nitrogen fractions and accelerate the composting process. However, it was most advantageous to use 150 L/h of continuous aeration to reduce NH3 emission and ensure the effective composting process. The aeration mode K5T15 (V1200) showed the fastest temperature rise, the longer duration of thermophilic stage and the highest GI (95%) in composting. The cumulative NH3 emission of intermittent aeration mode was higher than continuous aeration mode. The cumulative NH3 emission of V300 was 23.1% lower than that of K5T15 (V1200). The dominant phyla in dehydrated sludge and corn straw composting were Firmicutes, Proteobacteria, Actinobacteria, and Bacteroidetes. The dominant phylum in the thermophilic stage was Firmicutes (49.39%~63.13%), and the dominant genus was Thermobifida (18.62%~30.16%). The relative abundance of Firmicutes was greater in the intermittent aeration mode (63.13%) than that in the continuous aeration mode (57.62%), and Pseudomonas was dominant in composting with lower aeration rate and the lowest NH3 emission. This study suggested that adjustment to the aeration mode and rate could affect core bacteria to reduce the nitrogen loss and accelerate composting process.

Harnessing the potential of ginkgo biloba extract: Boosting denitrification performance through accelerated electron transfer

Ginkgo biloba extract (GBE) had several effects on the human body as one of the widely used phytopharmaceuticals, but it had no application in microbial enhancement in the environmental field. The study focused on the impact of GBE on denitrification specifically under neutral conditions. At the identified optimal addition ratio of 2% (v/v), the system exhibited a noteworthy increase in nitrate reduction rate (NRR) by 56.34%, elevating from 0.71 to 1.11 mg-N/(L·h). Moreover, the extraction of microbial extracellular polymeric substance (EPS) at this ratio revealed changes in the composition of EPS, the electron exchange capacity (EEC) was enhanced from 87.16 to 140.4 μmol/(g C), and the transfer impedance was reduced within the EPS. The flavin, fulvic acid (FA), and humic acid (HA) provided a π-electron conjugated structure for the denitrification system, enhancing extracellular electron transfer (EET) by stimulating carbon source metabolism. GBE also improved electron transfer system activity (ETSA) from 0.025 to 0.071 μL O2/(g·min·prot) and the content of NADH enhanced by 22.90% while significantly reducing the activation energy (Ea) by 85.6% in the denitrification process. The synergy of improving both intracellular and extracellular electron transfer, along with the reduction of Ea, notably amplified the initiation and reduction rates of the denitrification process. Additionally, GBE demonstrated suitability for denitrification across various pH levels, enhancing microbial resilience in alkaline conditions and promoting survival and proliferation. Overall, these findings open the door to potential applications of GBE as a natural additive in the environmental field to improve the efficiency of denitrification processes, which are essential for nitrogen removal in various environmental contexts.

Effect evaluation of different green wastes on food waste digestate composting and improvement of operational conditions

This study attempted to determine the influence of diverse green wastes on food waste digestate composting and the improvement of operational conditions. Various effects of the green wastes (GW), with different types and sizes, initial substrate mixture C/N ratios, compost pile heights, and turning frequencies on the food waste digestate (FWD) composting were examined in the current work. The findings showed that the use of street sweeping green waste (SSGW) as an additive can maintain the thermophilic stage of the FWD composting for 28 days, while the end-product contained the greatest amounts of total phosphorus (TP, 2.29%) and total potassium (TK, 4.61%) and the lowest moisture content (14.8%). Crushed SSGW (20 mm) enabled the FWD composting to maintain the longest thermophilic period (28 days), achieving the highest temperature (70.2 °C) and seed germination index (GI, 100%). Adjusting the initial substrate mixture C/N ratio to 25, compost pile height to 30 cm, and turning frequency to three times a day could enhance the efficiency and improve the fertilizer quality of the co-composting of the FWD and SSGW. This study suggested that co-composting of FWD and SSGW (FWD/SSGW = 2.3, wet weight) is a promising technique for the treatment of municipal solid waste and provided significant theoretical data for the application of composting.

Enhancing sustainable crop cultivation: The impact of renewable soil amendments and digestate fertilizer on crop growth and nutrient composition

Utilizing digestate as a fertilizer enhances soil nutrient content, improves fertility, and minimizes nutrient runoff, mitigating water pollution risks. This alternative approach replaces commercial fertilizers, thereby reducing their environmental impact and lowering greenhouse gas emissions associated with fertilizer production and landfilling. Herein, this study aimed to evaluate the impact of various soil amendments, including carbon fractions from waste materials (biochar, compost, and cocopeat), and food waste anaerobic digestate application methods on tomato plant growth (Solanum lycopersicum) and soil fertility. The results suggested that incorporating soil amendments (biochar, compost, and cocopeat) into the potting mix alongside digestate application significantly enhances crop yields, with increases ranging from 12.8 to 17.3% compared to treatments without digestate. Moreover, the combination of soil-biochar amendment and digestate application suggested notable improvements in nitrogen levels by 20.3% and phosphorus levels by 14%, surpassing the performance of the those without digestate. Microbial analysis revealed that the soil-biochar amendment significantly enhanced biological nitrification processes, leading to higher nitrogen levels compared to soil-compost and soil-cocopeat amendments, suggesting potential nitrogen availability enhancement within the rhizosphere's ecological system. Chlorophyll content analysis suggested a significant 6.91% increase with biochar and digestate inclusion in the soil, compared to the treatments without digestate. These findings underscore the substantial potential of crop cultivation using soil-biochar amendments in conjunction with organic fertilization through food waste anaerobic digestate, establishing a waste-to-food recycling system.

Addition of cellulose and hemicellulose degrading microorganisms intensified nitrous oxide emission during composting

This study aims to clarify the mechanisms underlying effects of inoculating cellulose and hemicellulose-degrading microorganisms on nitrous oxide (N2O) emissions during composting with silkworm excrement and mulberry branches. Inoculation with cellulose and hemicellulose-degrading microorganisms resulted in significant increases of total N2O emission by 10.4 ± 2.0 % (349.1 ± 6.2 mg N kg-1 dw) and 26.7 ± 2.1 % (400.6 ± 6.8 mg N kg-1 dw), respectively, compared to the control (316.3 ± 3.6 mg N kg-1 dw). The stimulation of N2O emission was attributed to the enhanced contribution of ammonia-oxidizing bacteria (AOB) and denitrifying bacteria to N2O production, as evidenced by the increased AOB amoA and denitrifying nirK gene abundances. Moreover, microbial inoculation stimulated N2O reduction to N2 owing to increased abundances of nosZⅠ and nosZⅠⅠ genes. These findings highlight the necessity to develop cost-effective and environmentally friendly strategies to reduce N2O emissions when cellulose and hemicellulose-degrading microorganisms are inoculated during composting.

Assessment of biodegradation of lignocellulosic fiber-based composites - A systematic review

Lignocellulosic fiber-reinforced polymer composites are the most extensively used modern-day materials with low density and better specific strength specifically developed to render better physical, mechanical, and thermal properties. Synthetic fiber-reinforced composites face some serious issues like low biodegradability, non-environmentally friendly, and low disposability. Lignocellulosic or natural fiber-reinforced composites, which are developed from various plant-based fibers and animal-based fibers are considered potential substitutes for synthetic fiber composites because they are characterized by lightweight, better biodegradability, and are available at low cost. It is very much essential to study end-of-life (EoL) conditions like biodegradability for the biocomposites which occur commonly after their service life. During biodegradation, the physicochemical arrangement of the natural fibers, the environmental conditions, and the microbial populations, to which the natural fiber composites are exposed, play the most influential factors. The current review focuses on a comprehensive discussion of the standards and assessment methods of biodegradation in aerobic and anaerobic conditions on a laboratory scale. This review is expected to serve the materialists and technologists who work on the EoL behaviour of various materials, particularly in natural fiber-reinforced polymer composites to apply these standards and test methods to various classes of biocomposites for developing sustainable materials.

Nutrient recovery and recycling from fishery waste and by-products

The circular bio-based economy offers great untapped potential for the food industry as possible valuable products and energy can be recovered from food waste. This can promote more sustainable and resilient food systems in Europe in follow-up of the European Commission's Farm to Fork strategy and support the global transition to more sustainable agri-food systems with the common agricultural and fisheries policies. With its high nutrient content, waste and by-products originating from fish and seafood industry (including aquaculture) are one of the most promising candidates to produce alternative fertilising products which can play a crucial role to replace synthetic mineral fertilisers. Whereas several studies highlighted the opportunities to recover valuable compounds from fishery waste, study towards their potential for the production of fertilising products is still scarce. This study presents an extensive overview of the characteristics of fishery waste and by-products (i.e., fish processing waste, fish sludge, seafood waste/by-products), the state-of-the-art nutrient recovery technologies and recovered nutrients as fertilising products from these waste streams. The European Commission has already adopted a revised Fertilising Products Regulation (EU) 2019/1009 providing opportunities for fertilising products from various bio-based origins. In frame of this opportunity, we address the quality and safety aspects of the fishery waste-derived fertilising products under these criteria and highlight possible obstacles on their way to the market in the future. Considering its high nutrient content and vast abundance, fish sludge has a great potential but should be treated/refined before being applied to soil. In addition to the parameters currently regulated, it is crucial to consider the salinity levels of such fertilising products as well as the possible presence of other micropollutants especially microplastics to warrant their safe use in agriculture. The agronomic performance of fishery waste-derived fertilisers is also compiled and reported in the last section of this review paper, which in most cases perform equally to that of conventional synthetic fertilisers.

A comprehensive review on the decentralized composting systems for household biodegradable waste management

Municipal solid waste primarily consists of household biodegradable waste (HBW). HBW treatment is a crucial step in many countries due to rapid urbanization. Composting is an effective technique to treat HBW. However, conventional composting systems are unable to produce matured compost (MC), as well as releasing huge amounts of greenhouse and odorous gases. Therefore, this review attempts to suggest suitable composting system to manage HBW, role of additives and bulking agents in composting process, identify knowledge gaps and recommend future research directions. Centralized composting systems are unable to produce MC due to improper sorting and inadequate aeration for composting substrate. Recently, decentralized compost systems (DCS) are becoming more popular due to effective solid waste reduction at the household and/or community level itself, thereby reducing the burden on municipalities. Solid waste sorting and aeration for the composting substrate is easy at DCS, thereby producing MC. However, Mono-composting of HBW in DCS leads to production of immature compost and release greenhouse and odorous gases due to lower free air space and carbon-to-nitrogen ratios, and higher moisture content. Mixing HBW with additives and bulking agents in DCS resulted in a proper initial substrate for composting, allowing rapid degradation of substrate due to longer duration of thermophilic phase and produce MC within a shorter duration. However, people have lack of awareness about solid waste management is the biggest challenge. More studies are needed to eliminate greenhouse and odorous gases emissions by mixing different combinations of bulking agents and additives (mainly microbial additives) to HBW in DCS.

Identifying the role of array electrodes in improving the compost quality of food waste during electric field-assisted aerobic composting

Low composting temperature and long maturation periods are two major problems during food waste composting. In this study, a novel array-based electric field-assisted aerobic composting (Pin-EAC) process was tested on food waste compost. Pin-EAC increase the composting temperature to 69.3 °C, and improved the germination index by 15%. The Pin-EAC took at least 40% less time to reach the standard compost maturity. The fluorescent spectroscopy results showed that Pin-EAC could increase humic acid and fulvic acid by 33% and 37%, respectively. Pin-EAC could increase the diversity of thermophilic bacteria during composting. The co-occurrence network shown that Pin-EAC are more closely related to oxygen and temperature. This work has initially shown that the use of an electric field could improve food waste composting quality, suggesting that the Pin-EAC process is an effective strategy for high-water and high-oil organic solid waste aerobic composting.

Ammonia assimilation is key for the preservation of nitrogen during industrial-scale composting of chicken manure

Nitrogen loss from compost is a serious concern, causing severe environmental pollution. The NH4+-N content reflects the release of NH3. However, the nitrogen conversion pathway that has the greatest impact on NH4+-N content is still unclear. This study attempted to explore the key pathways, core functional microorganisms, and mechanisms involved in the transformation of ammonia nitrogen during composting. KEGG (Kyoto Encyclopedia of Genes and Genomes) metabolic pathways revealed that ammonia assimilation was dominated by the glutamate dehydrogenase (GDH) pathway (53.4%), which is crucial for nitrogen preservation. The combined analysis of KEGG, NR species annotation, and co-occurrence network identified 20 easy-to-regulate obligate core nitrogen-transforming functional microorganisms, including 18 ammonia-assimilating bacteria. Furthermore, the effects of environmental parameters on the obligate core functional microorganisms were investigated. The present study results provided a theoretical basis for the utilization of ten ammonia-assimilating bacteria, such as Paenibacillus, Erysipelatoclostridium, and Defluviimonas to improve the quality of compost.

Impacts of digestate-based compost on soil property and nutrient availability

The treatment of digestate from food waste (DFW) has emerged as the bottleneck for food waste anaerobic digestion. DFW generally contains abundant nutrients that can be recycled by composting. However, the effect of DFW-based compost on soil improvement has not been extensively explored. In this study, soil properties were improved by adding various amounts of DFW-based compost, and the growth conditions of Pak choi were monitored. The results indicated that the DFW-based compost could provide nitrogen, calcium, magnesium, and organic matter, thereby enhancing the growth of Pak choi, accumulating chlorophyll, and improving photosynthesis efficiency. As the amount of added DFW-based compost increased from 0% to 20%, the fresh biomass, leaf weight, and root weight of Pak choi increased by 242%, 262%, and 99%, respectively. The total chlorophyll content was 2.62 mg g-1 in control and increased to 12.45 mg g-1 in the group with 20% DFW-based compost, benefiting the photochemical efficiency of Pak choi. However, the growth was inhibited when the addition amount exceeded 20%, potentially due to excessive nutrient supplementation. Overall, the addition of 20% of DFW-based compost was suggested to promote the growth of Pak choi by providing proper nutrients.

Inoculation with thermophiles enhanced the food waste bio-drying and complicated interdomain ecological networks between bacterial and fungal communities

Bio-drying is a practical approach for treating food waste (FW). However, microbial ecological processes during treatment are essential for improving the dry efficiency, and have not been stressed enough. This study analyzed the microbial community succession and two critical periods of interdomain ecological networks (IDENs) during FW bio-drying inoculated with thermophiles (TB), to determine how TB affects FW bio-drying efficiency. The results showed that TB could rapidly colonize in the FW bio-drying, with the highest relative abundance of 5.13%. Inoculating TB increased the maximum temperature, temperature integrated index and moisture removal rate of FW bio-drying (55.7 °C, 219.5 °C, and 86.11% vs. 52.1 °C, 159.1 °C, and 56.02%), thereby accelerating the FW bio-drying efficiency by altering the succession of microbial communities. The structural equation model and IDEN analysis demonstrated that TB inoculation complicated the IDENs between bacterial and fungal communities by significantly and positively affecting bacterial communities (b = 0.39, p < 0.001) and fungal communities (b = 0.32, p < 0.01), thereby enhancing interdomain interactions between bacteria and fungi. Additionally, inoculation TB significantly increased the relative abundance of keystone taxa, including Clostridium sensu stricto, Ochrobactrum, Phenylobacterium, Microvirga and Candida. In conclusion, the inoculation of TB could effectively improve FW bio-drying, which is a promising technology for rapidly reducing FW with high moisture content and recovering resources from it.

Effect of biodrying of lignocellulosic biomass on humification and microbial diversity

By optimizing the carbon to nitrogen (C/N) ratio, this study accomplished an improved level of humification and microbial diversity in the biodrying process of lignocellulosic biomass. The results demonstrated that C/N ratio of 20 accelerated the decomposition of refractory lignocellulose, resulting in lower greenhouse gas emissions and the production of highly mature fertilizer with a germination index of 119.0% and a humic index of 3.2. Moreover, C/N ratio of 20 was found to diversify microbial communities, including Pseudogracilibacillus, Sinibacillus, and Georgenia, which contributed to the decomposition of lignocellulosic biomass and the production of humic acid. Hence, it is recommended to regulate the C/N ratio to 20:1 during the biodrying of biogas residue and wood chips to promote the economic feasibility and bioresource recycling.

Nutrient challenges with solid-phase anaerobic digestate as a peat substitute - Storage decreased ammonium toxicity but increased phosphorus availability

The solid fraction (SD) obtained after liquid - solid separation of anaerobic digestate is interesting as a potential fertilizer as well as a peat substitute in horticultural growing substrates. We investigated the effect of incubation of the SD obtained by screw-press separation of digestate produced from food waste and plant residues on potentially plant available mineral nutrients and plant growth. The NH₄-N concentration was initially > 1000 mg L^-1 but rapidly decreased, probably due to NH₃ emission promoted by a high initial pH. No nitrate was detected during the first four weeks of incubation. The concentrations of potentially available P and Mg were closely related and strongly increased during incubation. The effect of adding 20 or 30 vol% of SD to a peat-based growing substrate on the growth of basil and lettuce was investigated before and after the incubation period. With the unincubated SD, the initial substrate NH₄-N of 200-300 mg L^-1 was potentially phytotoxic. Plant growth response ranged from inhibition to stimulation, probably reflecting variation in substrate ammonium status. After 96 days of incubation, ammonium concentrations had decreased with > 50% and basil growth was generally positively affected by addition of incubated SD. However, available P concentrations of 140-210 mg L^-1 in the incubated substrates posed a high risk of P leakage. In conclusion, storage greatly reduced NH₄-N concentrations and phytotoxicity when the SD was used as a partial substituent for peat in a horticultural growing substrate. Measures are needed, however, to limit available P concentrations in high-P solid digestate fractions.

Environmental ammonia analysis based on exclusive nitrification by nitrifying biofilm screened from natural bioresource

Biofilm-based biological nitrification is widely used for ammonia removal, while hasn't been explored for ammonia analysis. The stumbling block is the coexist of nitrifying and heterotrophic microbes in real environment resulting in non-specific sensing. Herein, an exclusive ammonia sensing nitrifying biofilm was screened from natural bioresource, and a bioreaction-detection system for the on-line analysis of environmental ammonia based on biological nitrification was reported. The nitrifying microbes were aggregated into a nitrifying biofilm through a result-oriented bioresource enrichment strategy. The predominant nitrifying population and progressive surface reaction in the plug flow bioreactor led to the exclusive and exhaustive ammonia biodegradation for the establishment of a novel analytical method. The on-line ammonia monitoring prototype achieved complete biodegradation for determining ammonium nitrogen within 5 min and showed exceptional reliability in long-term real sample measurements without frequent calibration. This work offers a low-threshold natural screening paradigm for developing sustainable bioresource-based analytical technologies.

Additive facilitated co-composting of lignocellulosic biomass waste, approach towards minimizing greenhouse gas emissions: An up to date review

Although the composting of lignocellulosic biomass is an emerging waste-to-wealth approach towards organic waste management and circular economy, it still has some environmental loopholes that must be addressed to make it more sustainable and reliable. The significant difficulties encountered when composting lignocellulosic waste biomass are consequently discussed in this study, as well as the advances in science that have been achieved throughout time to handle these problems in a sustainable manner. It discusses an important global concern, the emission of greenhouse gases during the composting process which limits its applicability on a broader scale. Furthermore, it discusses in detail, how different organic minerals and biological additives modify the physiochemical and biological characteristics of compost, aiming at developing eco-friendly compost with minimum odor, greenhouse gases emission and an optimum C/N ratio. It brings novel insights by demonstrating the effect of additives on the microbial enzymes and their pathways involved in the degradation of lignocellulosic biomass. This review also highlights the limitations of the application of additives in composting and suggests possible ways to overcome these limitations in the future for the sustainable and eco-friendly management of agricultural waste. The present review concludes that the use of additives in the co-composting of lignocellulosic biomass can be a viable remedy for the ongoing issues with the management of lignocellulosic waste.

Anaerobic digestate valorization beyond agricultural application: Current status and prospects

The flourishment of anaerobic digestion emphasizes the importance of digestate valorization, which is essential in determining the benefits of the anaerobic digestion process. Recently the perception of digestate gradually shifted from waste to products to realize the concept of circular economy and maximize the benefits of digestate valorization. Land application of digestate should be the simplest way for digestate valorization, while legislation restriction and environmental issues emphasize the necessity of novel valorization methods. This review then outlined the current methods for solid/liquid digestate valorization, nutrient recovery, microalgae cultivation, and integration with biological and thermochemical processes. The novel valorization routes proposed were summarized, with their challenges and prospects being discussed. Integrating anaerobic digestion with thermochemical methods such as hydrothermal carbonization should be a promising strategy due to the potential market value of hydrochar/biochar-derived products.

Insights into the influence of digestate-derived biochar upon the microbial community succession during the composting of digestate from food waste

The by-product from the anaerobic digestion of food waste (FW) called the digestate (DFW) needs proper disposal because of its high environmental burden. Composting can transform DFW into a nutrient-containing soil improver via a series of microbial metabolic activities. However, the long composting time and high amount of ammonia emission are the key concerns of DFW composting. In the present study, the effect of DFW-derived biochar (BC-DFW) on microbial succession and its involvement in nitrogen transformation and humification during DFW composting were investigated. The results indicated that the BC-DFW accelerated bacterial and fungal evolution, and the bacterial diversity was augmented by increasing the amount of BC-DFW. In particular, Cryomorpha, Castellaniella, Aequorivita, and Moheibacter were enriched by the addition of BC-DFW, thereby enhancing the degradation of organic matter and nitrogen transformation and increasing the germination index. The group with 25% BC-DFW contained a higher relative abundance of Cryomorpha (2.08%, 2.47%) than the control (0.39%, 1.72%) on days 19 and 35 which benefited the degradation of organic matter. The group with 25% BC-DFW quickly enhanced the growth of Nitrosomonas, thereby accelerating the conversion of ammonium-nitrogen to nitrate-nitrogen and reducing the phytotoxicity of the composting product.

Reducing nitrogen loss during kitchen waste composting using a bioaugmented mechanical process with low pH and enhanced ammonia assimilation

Exploring the regulation of nitrogen transformation in bioaugmented mechanical composting (BMC) process for rural kitchen waste (KW) is essential to avoid the "not-in-my-backyard" phenomenon caused by nitrogen loss. Herein, nitrogen transformation and loss in BMC versus conventional pile composting (CPC) of KW were compared. The results showed that the total nitrogen loss in the BMC was 6.87-39.32 % lower than that in the CPC. The main pathways to prevent nitrogen loss in the BMC were reducing NH₃ by avoiding a sharp increase in pH followed by transforming the preserved NH₄⁺-N into recalcitrant nitrogen reservoir via enhanced ammonia assimilation. The enriched thermophilic bacteria with mineralization capacities (e.g., Bacillus and Corynebacterium) during rapid dehydration and heating in the BMC accumulated organic acids and easy-to-use carbon sources, which could lead to lower pH and ammonia assimilation enhancement, respectively. This study provides new ideas for formulating low-cost nitrogen conservation strategies in decentralized KW composting.

Artificial intelligence and machine learning approaches in composting process: A review

Studies on developing strategies to predict the stability and performance of the composting process have increased in recent years. Machine learning (ML) has focused on process optimization, prediction of missing data, detection of non-conformities, and managing complex variables. This review investigates the perspectives and challenges of ML and its important algorithms such as Artificial Neural Networks (ANNs), Random Forest (RF), Adaptive-network-based fuzzy inference systems (ANFIS), Support Vector Machines (SVMs), and Deep Neural Networks (DNNs) used in the composting process. In addition, the individual shortcomings and inadequacies of the metrics, which were used as error or performance criteria in the studies, were emphasized. Except for a few studies, it was concluded that Artificial Intelligence (AI) algorithms such as Genetic algorithm (GA), Differential Evaluation Algorithm (DEA), and Particle Swarm Optimization (PSO) were not used in the optimization of the model parameters, but in the optimization of the parameters of the ML algorithms.

Role of tobacco and bamboo biochar on food waste digestate co-composting: Nitrogen conservation, greenhouse gas emissions, and compost quality

Anaerobic digestion is considered an environmentally benign process for the recycling of food waste into biogas. However, unscientific disposal of ammonium-rich food waste digestate (FWD), a by-product of anaerobic digestion induces environmental issues such as odor nuisances, water pollution, phytotoxicity and pathogen transformations in soil, etc. In the present study, FWD produced from anaerobic digestion of source-separated food waste from markets and industries was used for converting FWD into biofertilizer using 20-L bench scale composters. The issues of nitrogen loss, NH₃ volatilization, and greenhouse gas N₂O emission were addressed using in-situ composting technologies with the aid of tobacco and bamboo biochar produced at pyrolytic temperatures of 450 °C and 600 °C, respectively. The results demonstrated that the phytotoxic nature of FWD could be reduced into a nutrient-rich compost by mitigating nitrogen loss by 29-53% using 10% tobacco and 10% bamboo biochar in comparison with the control treatment. Tobacco biochar mitigates NH₃ emission by 63% but enhances the N₂O emission by 65%, whereas bamboo biochar mitigates both NH₃ and N₂O emissions by 48% and 31%, respectively. Overall, 10% tobacco and 10% bamboo biochar amendment could reduce total nitrogen loss by 29% and 53%, respectively. Furthermore, the biochar addition significantly enhanced the biodegradation rate of FWD and the mature compost could be produced within 21 days of FWD composting as seen by an increased seed germination index (>50% on dry weight basis). The results of this study could be beneficial in developing a circular bioeconomy locally with the waste-derived substrates.

Effect of different-sized bulking agents on nitrification process during food waste digestate composting

Food waste digestate (FWD) disposal is a serious bottleneck in anaerobic digestion plants to achieve a circular bioeconomy. FWD could be recycled into nitrogen-rich compost; however, the co-composting process optimisation along with bulking agents is required to reduce nitrogen loss and unwanted gaseous emissions. In the present study, two different-sized bulking agents, namely, wood shaving (WS) and fine sawdust (FS), were used to investigate their impact on FWD composting performance along with the nitrogen dynamics. The mixing of FWD with different bulking agents altered the physiochemical characteristics of composting matrix and the effective composting performance was observed through reduced ammonium nitrogen and increased seed germination index during 28 days of composting. The carbon loss of 19-22% through CO2 emission indicated similar carbon mineralisation with both types of sawdust; however, the nitrogen transformation pathways were different. Only WS treatment demonstrated the nitrification process, whereas the nitrogen loss was higher with FS. A total nitrogen loss of ∼15% was observed in treatments with FS, whereas WS treatments displayed a nitrogen loss of 12%. The outcome of the present study could significantly contribute to the practical aspect of the FWD composting operation with the promotion of the bio-recycling economy.

Current and prognostic overview on the strategic exploitation of anaerobic digestion and digestate: A review

The depletion of fossil fuels and increasing demand for energy are encountered by generating renewable biogas. Anaerobic digestion (AD) produces not only biogas, also other value-added products from the digestate using various organic, municipal and industrial wastes which have several benefits like remediating waste, reduces greenhouse gas emissions, renewable energy generation and securing socio-economic status of bio-based industries. This review work critically analyzes the biorefinery approaches on AD process for the production of biogas and digestate, and their direct and indirect utilization. The left-out residue obtained from AD is called 'digestate' which enriched with organic matter, nitrogen, heavy metals and other valuable micronutrients. However, the direct disposal of digestate to the land as fertilizer/landfills creates various environmental issues. Keeping this view, the digestate should be upgraded or transformed into high valued products such as biofertilizer, pyrochar, biodiesel, syngas and soil conditioner that can aid to enrich the soil nutrients and ensures the safe environment as well. In this context, the present review focused to illustrate the current techniques and different strategic exploitations on AD proper management of digestate products for storage and further applications. Such a technology transfer provides a proven strategic mechanism towards the enhancement of the sustainability of bio-based industries, attaining the energy demand, safest waste management, protection of environment and reduces the socio-economic issues of the industrial sector.

Food waste digestate composting enhancement by sodium polyacrylate addition: Effects on nitrogen transformation processes and bacterial community dynamics

The influences of sodium polyacrylate (PAAS) at the ratios of 0% (CK), 0.5% (F1), 1.0% (F2), 1.5% (F3), 2.0% (F4) and 2.5% (F5) on nitrogen transformation and bacterial community composition were investigated in the composting of food waste digestate (FWD) and corn straw (CS). PAAS addition increased the thermophilic temperature but had no significant effect on pH values. PAAS exerted significantly effects on the concentration of total nitrogen (TN), ammonia nitrogen (NH₄⁺-N), nitrite-nitrogen (NO₂^--N) and nitrate-nitrogen (NO₃^--N). The compost product in 1.0% PAAS treatment was more active in absorbing nutrients. Firmicutes (9.40-83.54%), Actinobacteriota (9.98-51.50%), Proteobacteria (0.20-27.87%) and Bacteroidota (0.11-34.69%) were the dominant phyla in FWD composting. Moreover, relative to CK, PAAS promoted the propagation of dominant bacterial phyla Firmicutes with increment of 30.05-102.06% in the thermophilic phase. Kroppenstedtia, Thermobifida and Saccharomonospora were observed to be dominant at the maturing phase and correlated with NH₄⁺-N, NO₂^--N, TN and NO₃^--N. Therefore, they might be regarded as probable biomarkers symbolic for the maturing phase during FWD composting. The compost product had the highest maturity degree in 1.0% PAAS treatment. These results indicated that PAAS addition improved the maturity and nutrient contents of the compost product as well as altered compost bacterial community dynamics.

Matured Manure and Compost from the Organic Fraction of Solid Waste Digestate Application in Intensive Apple Orchards

In intensive fruit growing systems, the recovery and maintenance of soil fertility play a crucial role in both environmental protection and sustainable support to plant productivity. The circular economy approach adopted at the EU level strongly promotes the use of organic products instead of mineral fertilizers. This work focuses on two different soil improvers, compost from the organic fraction of municipal solid waste digestate (CO) and "matured" manure, produced after a fast and controlled aerobic treatment in an aerated pile (MM), which were applied in three apple orchards with different soil tillage. The soil improvers have been characterized for amendment and fertilizing properties. After the amendment, the soils were sampled twice a year (Spring and Autumn) for three years. Each sample has been characterized for texture, pH, cation exchange capacity, nutrients, soil organic matter, and micronutrients. The amendments obtained differed on C, N, P, and K contents, but had similar biological stability. The main effects on soils were the increasing of N and soil organic matter after compost application, while the use of matured manure mainly act on available P and exchangeable K. The treatments showed significant effects among fields with a linear increasing trend only for compost. Matured manure showed more effects in earlier times. The data collected aim to improve the knowledge about sustainable management of soil organic matter and organic nutrients in intensive fruit-growing agriculture by using local products.

In-situ untilization of nitrogen-rich wastewater discharged from a biotrickling filter as a moisture conditioning agent for composting: Effect of nitrogen composition

Although the composting-biotrickling filter coupled system removed ammonia-based odor pollution, other pollutants (nitrogen-rich wastewater) arose. This study intended to determine the effect of in-situ disposal of different kinds of nitrogen-rich wastewater [i.e., multi-nitrogen (NH₄⁺, NO₂^-, and NO₃^-)-rich (STL1), NO₂^--rich (STL2), and NO₃^--rich (STL3)] as a moisture adjustment agent during the composting thermophilic period on nitrogen transformation. Results indicated that nitrogen-rich wastewater addition did not impair the compost maturation, whereas raised the total nitrogen content of fertilizer by 15.8%-46.7% compared to the control group (i.e., tap water group). Moreover, adding STL1 has the potential to reduce CO₂ and NH₃ emissions and avoid incomplete organic nitrogen decomposition. Furthermore, nitrogen flow analysis unveiled that STL1 addition increased nitrogen content by strengthening ammonification, dissimilatory nitrite reduction to ammonium, and high-temperature nitrification pathways. Thus, in-situ disposal of STL1 from biotrickling filters via composting is a suitable technique for coupled systems to achieve zero discharge.

Environmental implications, potential value, and future of food-waste anaerobic digestate management: A review

Globally, the valorisation of food waste into digestate through the process of anaerobic digestion is becoming increasingly popular. As a result, a large amount of food-waste digestate will need to be properly utilised. The utilisation of anaerobic digestion for fertiliser and alternative uses is essential to obtain a circular bioeconomy. The review aims to examine the environmental management of food-waste digestate, the value of digestate as a fertiliser and soil conditioner, and the emerging uses and improvements for post-anaerobic digestion reuse of digestate. Odour emissions, contaminants in food waste, emission and leaching of nutrients into the environment, and the regulations, policies, and voluntary initiatives of anaerobic digestion are evaluated in the review. Food-waste digestate can provide essential nutrients, carbon, and bio-stimulants to soils and increase yield. Recently, promising research has shown that digestates can be used in hydroponic systems and potentially replace the use of synthetic fertilisers. The integration of anaerobic digestion with emerging uses, such as extraction of value-added products, algae cultivation, biochar and hydrochar production, can further reduce inhibitory sources of digestate and provide additional economic opportunities for businesses. Moreover, the end-product digestate from these technologies can also be more suitable for use in soil application and hydroponic use.

Mitigation of NH3 and N2O emissions during food waste digestate composting at C/N ratio 15 using zeolite amendment

Composting of food waste digestate (FWD) is challenging as it requires more bulking agents, and the nitrogen loss is inevitable. To address these issues, FWD composting was conducted at a relatively lower C/N ratio of 15 with zeolite amendment in the dosage range of 5-15%. The impact of zeolite addition on nitrogen loss, NH₃ and N₂O emissions was assessed during FWD composting. The results showed that the addition of 10-15% zeolite could significantly reduce the phytotoxic nature of FWD and the compost maturity level could be reached in 10-21 days. Furthermore, ∼45% total nitrogen loss could be reduced by mitigating NH₃ and N₂O emissions upon 10 and 15% zeolite amendment. The outcome of the present study could be used as an effective strategy for composting FWD in any part of the world as the FWD characteristics are similar irrespective of the type of food waste.

Potential Applications of Frass Derived from Black Soldier Fly Larvae Treatment of Food Waste: A Review

The disposal of large amounts of food waste has caused serious environmental pollution and financial losses globally. Compared to alternative disposal methods (landfills, incineration, and anaerobic digestion), composting by black soldier fly larvae (BSFL) is a promising alternative for food waste management. Despite extensive research into larval biomass, another valuable by-product generated from BSFL composting is BSFL frass. However, limited information is available for its potential application. The applications of BSFL frass can be intensified by understanding its physicochemical characteristics, benefits, and challenges of BSFL frass derived from food waste. BSFL frass is harvested after 9–23 days of the experiment, depending on the substrate used in the composting process. The generated BSFL frass could exceed 33% of the original weight of the substrate. The physicochemical characteristics of BSFL frass are as follows: the temperature after harvest is 24 °C to 27 °C, pH is 5.6–8.0, moisture content is 30 to 72%, C/N ratio is 8:1 to 27:1, high nitrogen, phosphorus, and potassium (NPK) content, and low heavy metal content. This paper reviews the characteristics, benefits, and application of BSFL frass. It will also investigate the challenges of using food waste substrates to produce BSFL frass, as well as the best way to pre-treat the food waste substrate and post-treat the BSFL frass.

Correlation of microbial dynamics to odor production and emission in full-scale sewage sludge composting

Odor is inevitably produced during sewage sludge composting, and the subsequent pollution hinders the further development of composting technologies. Third-generation high-throughput sequencing was used to analyze microbial community succession, and the correlations between odor and microbial communities were evaluated. Hydrogen sulfide (47.5-87.9 %) and ammonia (9.4-49.9 %) contributed majorly to odor emissions, accounting for 93.7-98.5 % of the emissions. Volatile sulfur compounds were mainly produced in the mesophilic and pre-thermophilic phases (43.0-83.4 %), whereas ammonia was mainly produced in the thermophilic phase (52.1-59.4 %). Microorganisms dominant in the mesophilic and thermophilic phases correlated positively with odor production in the following order: Rhodocyclaceae > Clostridiaceae_1 > Hyphomicrobiaceae > Acidimicrobiales > Family_XI, whereas those dominant in the cooling phase showed negative correlations with odor production in the following order: Bacillus > Sphingobacteriaceae > Pseudomonadaceae > DSSF69 > Chitinophagaceae. The back mixing of mature compost is expected to serve as an economical measure for controlling odor during sewage sludge composting.

Succession and change of potential pathogens in the co-composting of rural sewage sludge and food waste

Composting is an effective way to prevent and control the spread of pathogenic microorganisms which could put potential risk to humans and environment, from rural solid waste, especially sewage sludge and food waste. In the study, we aim to analyze the changes of pathogenic bacteria during the co-composting of rural sewage sludge and food waste. The results showed that only 27 pathogenic bacteria were detected after composting, compared to 50 pathogenic bacteria in the raw mixed pile. About 74% of pathogen concentrations dropped below 1000 copies/g after composting. Lactobacillus, Bacillus, Paenibacillus and Comamonas were the core pathogenic bacteria in the compost, of which concentrations were all significantly lower than that in the raw mixed pile at the end of composting. The concentration of Lactobacillus decreased to 3.03 × 10³ copies/g compared to 0 d with 1.25 × 10⁹ copies/g by the end of the composting, while that of Bacillus, Paenibacillus and Comamonas decreased to 2.77 × 10⁴ copies/g, 2.13 × 10⁴ copies/g and 3.38 × 10² copies/g, respectively, with 1.26 × 10⁷ copies/g, 4.71 × 10⁶ copies/g, 1.69 × 10⁸ copies/g on 0 d. Redundancy analysis (RDA) indicated that physicochemical factors and substances could affect the changes of pathogenic bacteria during composting, while temperature was the key influencing factor. In addition, certain potential pathogenic bacteria, such as Bacteroides-Bifidobacterium, show statistically strong and significant co-occurrence during composting, which may increase the risk of multiple infections and also influence their distribution. These findings provide a theoretical reference for biosafety prevention and control in the treatment and disposal of rural solid waste.

Mechanism of digestate-derived biochar on odorous gas emissions and humification in composting of digestate from food waste

Emissions of odorous gases and prolonged composting duration are the key concerns in the composting of digestate from food waste (DFW). In this study, different amounts of biochar derived from DFW (BC-DFW) were introduced in the composting process of DFW to decrease the emissions of ammonia (NH₃) and volatile sulfur compounds (VSCs) and composting duration. The addition of BC-DFW increased the temperature and germination index during DFW composting. The group with 25% BC-DFW exhibited a 30% smaller composting duration. Significant amounts of NH₃ and VSCs emissions were observed in the initial phase of DFW composting. Dimethyl disulfide (DMDS) was a prominent contributor to the odor associated with VSCs. The addition of BC-DFW facilitated the adsorption of NH₃ and VSCs, and the corresponding contents decreased by 5-21% and 15-20%, respectively. Moreover,the BC-DFW accelerated the transformation of ammonium-nitrogen (NH₄⁺-N) to nitrate-nitrogen (NO₃^--N), thereby alleviating the NH₃ volatilization. The addition of 25% BC-DFW minimized the NH₃ emission and enhanced the generation of humic-acid-like matter, thereby promoting humification. Therefore, the addition of 25% BC-DFW was optimal for promoting the degradation of organic matter and humification and odor emission reduction (e.g., NH₃, DMDS).

Current technologies and future perspectives for the treatment of complex petroleum refinery wastewater: A review

Petroleum refinery wastewater (PRW) is a complex mixture of hydrocarbons, sulphides, ammonia, oils, suspended and dissolved solids, and heavy metals. As these pollutants are toxic and recalcitrant, it is essential to address the above issue with efficient, economical, and eco-friendly technologies. In this review, initially, an overview of the characteristics of wastewater discharged from different petroleum refinery units is discussed. Further, various pre-treatment and post-treatment strategies for complex PRW are introduced. A segregated approach has been proposed to treat the crude desalting, sour, spent caustic, and oily wastewater of petroleum refineries. The combined systems (e.g., ozonation + moving bed biofilm reactor and photocatalysis + packed bed biofilm reactor) for the treatment of low biodegradability index wastewater (BOD₅/COD < 0.2) were discussed to construct a perspective map and implement the proposed system efficiently. The economic, toxicity, and biodegradability aspects are also introduced, along with research gaps and future scope.

Hydrochar and hydrochar co-compost from OFMSW digestate for soil application: 2. agro-environmental properties

The work concerns the study of the hydrochar from digestate and hydrochar co-compost characterization as amendments. The processes for hydrochar and co-compost production were described in Part 1 of this work (Scrinzi et al., 2022). The amendment properties of hydrochar (produced at 180-200-220 °C for 3 h) and co-composts (25%, 50%, and 75% hydrochar percentage of digestate substitution) were assessed by phytotoxicity, plant growth bioassay, and soil effect. Different seeds species (Lepidium sativum, Cucumis sativus, and Sorghum bicolor sp.) were dosed at increased concentrations using both wet raw amendments and their water extracts. The chemical characterization showed phytotoxic compounds content depending on both the initial feedstock (digestate) and the HTC process; at the same time, the analysis highlighted the reduction of these compounds by composting (organic acid, polyphenols, salt concentration). The dose-response was analyzed by the Cedergreen-Streibig-Ritz model and the half-maximal effective concentration (EC50) was calculated based on this equation. The soil properties and GHG emissions measurements (CH₄, CO₂, N₂O, and NH₃) highlighted the effect on N dynamics and on soil respiration induced by substrates. The HC200 soil application determined a significant impact on CO₂ and N₂O emission and NH₃ volatilization (10.82 mol CO₂/m²; 51.45 mmol N₂O/m²; 112 mol NH₃/m²) and a significant reduction of total N and TOC (46% of TKN and 49% of TOC). The co-compost (75%) showed specific effects after soil application compared to other samples an increase of available P (48%), a greater content of nitrogen (1626 mg/kg dry basis), and a reduction of organic carbon (17%). Our results demonstrate the good quality of co-compost and at the same time the validity of this post-treatment for addressing many issues related to hydrochar use in the soil as an amendment, confirming the suitability of HTC process integration for digestate treatment in anaerobic digestion plants.

Physicochemical and fertility characteristics of microalgal soil ameliorants using harvested cyanobacterial microalgal sludge from a freshwater ecosystem, Republic of Korea

The recovery and reuse strategy of cyanobacterial microalgal sludge (CyanoMS) is a novel sustainable platform that can mitigate cyanobacterial harmful algal blooms (CyanoHABs) in the freshwater system. This study aimed to assess the nutritional feasibility of harvested CyanoMS for microalgal soil ameliorants (MSAs) as efficient biofertilizers by the composting process. Most MSAs exhibited stable nutrient levels during the sequential metabolic phases for the entire period. The qualitative value of all MSAs using CyanoMS as a biofertilizer was verified by the excellent Fertility Index (FI), Clean Index (CI), and plant growth values. Also, successfully matured MSAs provided long-term support for retarded release of nutrients along the microbial transitional pathway. However, suitable CyanoMS contents of 11.7-37.6% (w/w) in MSAs were critical for efficient microbial activation and substrate inhibition. Since these results were fundamentally based on microbial transition on the CyanoMS content, optimum weight content and composting period were required. Nevertheless, MSAs were commercially applicable to high value-added crops due to their high fertilization potential and recyclable value.

Improvement in the physicochemical characteristics of biochar derived from solid digestate of food waste with different moisture contents

The management of digestate from food waste (DFW) has become a worldwide challenge. Pyrolysis is a promising technology to generate biochar from the DFW. However, unlike other biomass, DFW usually has high salt and moisture content, which affects the properties of biochar generated from pyrolysis. The characteristics of biochar derived from DFW with different MCs (5%, 20%, 40%, and 60%) were investigated in the present study. It was found that more micropore and mesopore structures were generated in the biochar with the increase of MC from 5% to 60%, resulting in the Brunauer-Emmett-Teller surface area of the biochar increased from 89.23 m² g^-1 to 117.75 m² g^-1. The MC could also promote the variation of oxygen-containing functional groups and the generation of amorphous carbon structures, which are beneficial for the adsorption property of the biochar. Pyrolysis could stabilize the metals in the biochar, while MC has little effect on the metal speciations. These results provide fundamental information on the impact of MC on the properties of biochar derived from DFW and are important for the optimization of the pre-drying process.

The challenges and perspectives for anaerobic digestion of animal waste and fertilizer application of the digestate

The increase in livestock production creates a serious problem of managing animal waste and by-products. Among the wide range of waste valorization methods available, anaerobic digestion is very promising. It is a form of material recycling that also produces renewable energy in the form of biogas, which is reminiscent of energy recycling. The effluent and digestate from the anaerobic digestion process need to be processed further. These materials are widely used in agriculture due to their composition. Both the liquid and solid fractions of digestate are high in nitrogen, making them a valuable source for plants. Before soil or foliar application, conditioning (e.g., with inorganic acids) and neutralization (e.g., with potassium hydroxide) is required to eliminate odorous compounds and microorganisms. Various methods of conducting the process by anaerobic digestion (use of additives increasing activity of microorganisms, co-digestion, multiple techniques of substrate preparation) and the possibility of controlling process parameters such as optimal C/N ratio (15-30), optimal temperature (psychrophilic (<20 °C), mesophilic (35-37 °C) and thermophilic (55 °C) for microorganism activity ensure high efficiency of the process. Literature data describing tests of various digestates on different plants prove high efficiency, determined by yield increase (even by 28%), nitrogen uptake (by 20%) or phosphorus recovery rate (by 43%) or increase of biometric parameters (e.g., leaf area).

Genetic modifications associated with sustainability aspects for sustainable developments

Sustainable development serves as the foundation for a range of international and national policymaking. Traditional breeding methods have been used to modify plant genomes and production. Genetic engineering is the practice of assisting agricultural systems in adapting to rapidly changing global growth by hastening the breeding of new varieties. On the other hand, the development of genetic engineering has enabled more precise control over the genomic alterations made in recent decades. Genetic changes from one species can now be introduced into a completely unrelated species, increasing agricultural output or making certain elements easier to manufacture. Harvest plants and soil microorganisms are just a few of the more well-known genetically modified creatures. Researchers assess current studies and illustrate the possibility of genetically modified organisms (GMOs) from the perspectives of various stakeholders. GMOs increase yields, reduce costs, and reduce agriculture's terrestrial and ecological footprint. Modern technology benefits innovators, farmers, and consumers alike. Agricultural biotechnology has numerous applications, each with its own set of potential consequences. This will be able to reach its full potential if more people have access to technology and excessive regulation is avoided. This paper covers the regulations for genetically modified crops (GMCs) as well as the economic implications. It also includes sections on biodiversity and environmental impact, as well as GMCs applications. This recounts biotechnological interventions for long-term sustainability in the field of GMCs, as well as the challenges and opportunities in this field of research.Abbreviations: GMCs-Genetically modified crops; GMOs- Genetically modified organisms; GE- Genetic engineering; Bt- Bacillus thuringiensisNIH- National Institutes of Health; FDA- Food and Drug Administration; HGT- Horizontal gene transfer; GM- Genetically modified; rDNA- Ribosomal deoxyribonucleic acid; USDA- United States Department of Agriculture; NIH- National Institutes of Health.

Use of activated carbon to reduce ammonia emissions and accelerate humification in composting digestate from food waste

Management of digestate from food waste (DFW) is becoming the bottleneck of the food waste anaerobic digestion. Composting is a feasible method to dispose the DFW and convert it to organic fertilizer; however, high ammonia (NH₃) emissions and long composting time are key concerns in this process. In this study, the mechanism of activated carbon (AC) on the loss of NH₃ and humification during DFW composting was investigated. The use of AC could promote humification, shorten 50% of the DFW composting period, and decrease the NH₃ emissions by 34%. Results of the microbial analysis indicated that the AC could promote the growth of key microbes (i.e., Wallemia genus for fungi; and Fastidiosipila genus for bacteria). The Cladosporium and Fastidiosipila genera developed in the fractions closely and loosely attached to the AC, respectively, leading to faster degradation of lignocellulose matter. In addition, AC could enrich the Ammoniibacillus genus, reducing nitrogen loss.

Sustainable additives for the regulation of NH3 concentration and emissions during the production of biomethane and biohydrogen: A review

This study reviews the recent advances and innovations in the application of additives to improve biomethane and biohydrogen production. Biochar, nanostructured materials, novel biopolymers, zeolites, and clays are described in terms of chemical composition, properties and impact on anaerobic digestion, dark fermentation, and photofermentation. These additives can have both a simple physical effect of microbial adhesion and growth, and a more complex biochemical impact on the regulation of key parameters for CH₄ and H₂ production: in this study, these effects in different experimental conditions are reviewed and described. The considered parameters include pH, volatile fatty acids (VFA), C:N ratio, and NH₃; additionally, the global impact on the total production yield of biogas and bioH₂ is reviewed. A special focus is given to NH₃, due to its strong inhibition effect towards methanogens, and its contribution to digestate quality, leaching, and emissions into the atmosphere.