Self-immobilized biochar fungal pellet combined with bacterial strain H29 enhanced the removal performance of cadmium and nitrate

Magnetization and ZIF-67 modification of Aspergillus flavus biomass for tetracycline removal from aqueous solutions: A stable and efficient composite

In the present work, the biomass of Aspergillus flavus (AF) was modified using magnetic nanoparticles MnFe2O4 and metal-organic framework of ZIF-67, and its ability to remove tetracycline antibiotic (TCH) was investigated. With the help of physicochemical tests, AF biomass modification with ZIF-67 and MnFe2O4 magnetic nanoparticles was confirmed. Based on the BET value, AF-MnFe2O4-ZIF-67 (139.83 m2/g) has a higher surface value than AF (0.786 m2/g) and AF/MnFe2O4 (17.504 m2/g). Also, the magnetic saturation value revealed that the modified biomass can be isolated from the treated solution using a simple magnetic field. Maximum TCH elimination (99.04%) using AF-MnFe2O4-ZIF-67 was obtained at pH 7, adsorber mass of 1 g/L, adsorption time of 40 min, and TCH content of 10 mg/L. The thermodynamic study indicated that the TCH abatement using the desired composite is spontaneous and exothermic. The experimental results showed that the adsorption process is compatible with the pseudo-second-order kinetic and Freundlich model. The maximum adsorption capacity for AF, AF-MnFe2O4, and AF-MnFe2O4-ZIF-67 was quantified to be 9.75 mg/g, 25.59 mg/g, and 43.87 mg/g, respectively. The reusability of the desired adsorbers was examined in up to 8 steps. The outcomes showed that the adsorbers can be used several times in TCH elimination. The provided composite can remove TCH from hospital wastewater, so it can be suggested for use in water and wastewater treatment works.

Efficient removal of Sb(III) from wastewater using selenium nanoparticles synthesized by Psidium guajava plant extract

Antimony (Sb) pollution in aquatic ecosystems has emerged as a critical environmental issue on a global scale, emphasizing the urgent need for cost-effective and user-friendly technologies to remove Sb compounds from water sources. In this study, a novel adsorbent, selenium nanoparticles (SeNPs), was synthesized using the aqueous extract of Psidium guajava L. leaves (AEP) for the purpose of eliminating Sb(III) from aqueous solutions. The biosynthesized SeNPs was characterized using scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), X-ray fluorescence spectrometer (XRF), Fourier Transform-Infrared (FT-IR) spectroscopy, X-ray diffraction (XRD), Raman spectroscopy and X-ray photoelectron spectroscopy (XPS) analysis techniques. Additionally, the removal efficiency of the SeNPs for Sb(III) was systematic investigated under the effects of SeNPs dose, temperature, pH and re-usability. The results of this study showed that the adsorption data fitted well into pseudo-second order model, while the Sips modeling demonstrated a high adsorption capacity (62.7 mg/g) of SeNPs for Sb(III) ions at 303.15 K from aqueous solution. The exothermic enthalpy change of - 22.59 kJ/mol and negative Gibbs free energy change assured the viability of the adsorption process under the considered temperature conditions. Surface functional groups on SeNPs like carboxyl, amide, hydroxyl, carbonyl, and methylene significantly facilitate the adsorption processes. Furthermore, the removal efficiencies of Sb in the two actual Sb mine wastewater samples were remarkably high, achieving nearly to 100% with 1.5 g/L SeNPs within 48 h. This outcome underscores the potential of SeNPs as a highly promising solution for efficiently remediating Sb from aquatic environments, owing to their cost-effectiveness, ease of regeneration, and rapid uptake capabilities.

Recovery of Y(III) from wastewater by Pseudomonas psychrotolerans isolated from a mine soil

While microbial technologies, which are considered to be environmentally friendly, have great potential for the recovery of rare earth elements (REEs) from mining wastewater, their applications have been restricted due to a lack of efficient biosorbents. In this study, a strain of Pseudomonas psychrotolerans isolated from yttrium-enriched mine soil was used to recover yttrium (Y(III)) from rare-earth mining wastewater. At an initial Y(III) dose of 50 mg L-1, the amount of Y(III) adsorbed by P. psychrotolerans reached 99.9 % after 24 h. Various characterization techniques revealed that P. psychrotolerans adsorbed Y(III) mainly through complexation of oxygen-containing functional groups and electrostatic interactions. A high level of adsorption efficiency (>99.9 %) was maintained after five consecutive adsorption/desorption cycles, indicating that P. psychrotolerans was highly reusable. While the efficiency of adsorbing Y(III) by P. psychrotolerans decreased (34.4 %) in actual rare earth mining wastewater, selectivity toward other REEs (≤ 18.4 %) was still observed. Consequently, this study provides a promising green, environmentally friendly and sustainable microbial approach for the selective recovery of REEs from rare earth wastewater.

Regulation of ARGs abundance by biofilm colonization on microplastics under selective pressure of antibiotics in river water environment

Interactions of microplastics (MPs) biofilm with antibiotic resistance genes (ARGs) and antibiotics in aquatic environments have made microplastic biofilm an issue of keen scholarly interest. The process of biofilm formation and the degree of ARGs enrichment in the presence of antibiotic-selective pressure and the impact on the microbial community need to be further investigated. In this paper, the selective pressure of ciprofloxacin (CIP) and illumination conditions were investigated to affect the physicochemical properties, biomass, and extracellular polymer secretion of polyvinyl chloride (PVC) microplastic biofilm. In addition, relative copy numbers of nine ARGs were analyzed by real-time quantitative polymerase chain reaction (qPCR). In the presence of CIP, microorganisms in the water and microplastic biofilm were more inclined to carry associated ARGs (2-3 times higher), which had a contributing effect on ARGs enrichment. The process of pre-microplastic biofilm formation might have an inhibitory effect on ARGs (total relative abundance up to 0.151) transfer and proliferation compared to the surrounding water (total relative abundance up to 0.488). However, in the presence of CIP stress, microplastic biofilm maintained the abundance of ARGs (from 0.151 to 0.149) better compared to the surrounding water (from 0.488 to 0.386). Therefore, microplastic biofilm act as abundance buffer island of ARGs stabilizing the concentration of ARGs. In addition, high-throughput analyses showed the presence of antibiotic-resistant (Pseudomonas) and pathogenic (Vibrio) microorganisms in biofilm under different conditions. The above research deepens our understanding of ARGs enrichment in biofilm and provides important insights into the ecological risks of interactions between ARGs, antibiotics, and microplastic biofilm.

Performance and characterization of snail adhesive mucus as a bioflocculant against toxic Microcystis

Toxic Microcystis blooms are widespread in aquatic bodies, posing major threats to aquatic and human life. Recently, bioflocculants have attracted considerable attention as a promising biomaterial for Microcystis management. In search of a novel organism that can produce an efficient bioflocculant for controlling harmful algae sustainably, the native gastropod Cipangopaludina chinensis was co-cultured continuously with toxic Microcystis under different initial algal cell densities. The bioflocculation effect of snail mucus on toxic Microcystis, microcystin removal, and toxin accumulation in snails was investigated. In addition, the properties of the adhesive mucus were characterized using microscopic, X-ray diffraction, infrared spectroscopy, and polysaccharide and proteome analyses. Microcystis cells were captured and flocculated by the snail mucus; removal efficiencies of up to 89.9% and 84.8% were achieved for microalgae and microcystin-leucine arginine (MC-LR), respectively, when co-cultured with C. chinensis for only one day. After nine-day exposure, less than 5.49 µg/kg DW microcystins accumulated in the snails, indicating safety for human consumption. The snail mucus contained 104.3 µg/mg protein and 72.7 µg/mg carbohydrate, which provide several functional groups beneficial for Microcystis bioflocculation. The main monosaccharide subunits of polysaccharides are galactose, galactosamine, glucosamine, fucose, glucose, and mannose. Most of them are key components of polysaccharides in many bioflocculants. Gene Ontology analysis indicated the protein enrichment in binding processes and catalytic activity, which may account for Microcystis bioflocculation via protein binding or enzymatic reactions. The findings indicate that native C. chinensis secretes adhesive mucus that can act as bioflocculant for toxic Microcystis from ambient water and can be an effective and eco-friendly tool for Microcystis suppression.

Techniques and mechanisms of bacteria immobilization on biochar for further environmental and agricultural applications

Bacteria immobilization on biochar is a promising approach to achieve high concentration and stability of microbial cells for several applications. The present review addressed the techniques utilized for bacteria immobilization on biochar, discussing the mechanisms involved in this process, as well as the further utilization in bioremediation and agriculture. This article presents three immobilization techniques, which vary according to their procedures and conditions, including cell growth, adsorption, and adaptation. The mechanisms for cell immobilization are primarily adsorption and biofilm formation on biochar. The favorable characteristics of biochar immobilization depend on the pyrolysis methods, raw materials, and properties of biochar, such as surface area, pore size, pH, zeta potential, hydrophobicity, functional groups, and nutrients. Scanning electron microscope (SEM) and colony forming unit (CFU) are the analyses commonly carried out to verify the efficiency of bacteria immobilization. The benefits of applying biochar-immobilized bacteria include soil decontamination and quality improvement, which can improve plant growth and crop yield. Therefore, this emerging technology represents a promising solution for environmental and agricultural purposes. However, it is important to evaluate the potential adverse impacts on native microbiota by introducing exogenous microorganisms.

Biocomposite based on graphene oxide immobilized Pseudomonas psychrotolerans for the recovery of Y(III) in acid mine drainage

Rare earth elements (REEs) recovery is a critical issue concerning both resource recovery and wastewater utilization. In this study, a new bio-composite was fabricated using graphene oxide immobilized Pseudomonas psychrotolerans (PP@GO), which was isolated from the soil of REEs mine. Results showed that 99.6% Y(III) was removed in 48 h and various characterization confirmed that S-S, -NH2, HPO42-, -OH and -COOH from extracellular polymeric substances (EPS) secreted by microorganisms formed complexation with Y(III). As well, the Y(III) adsorption best followed Freundlich isotherm and non-linear pseudo-second-order kinetic model having R2 of 0.985 and 0.996, respectively, demonstrating that the adsorption was governed by multilayered chemisorption. Additionally, the effectiveness of PP@GO was not limited to Y(III), where 27.9% of this substance was removed in acid mine drainage (AMD), also exhibited great adsorption for other REEs, such as Er (45.0%) and Ho (43.8%). Furthermore, the adsorption efficiency of Y(III) remained high (70.0%) after a 5th cycle, emphasizing the consistent stability of PP@GO. Finally, REEs adsorbed could be greatly desorbed by KNO3, like Sm (80.1%) and La (80.0%), which revealed that PP@GO has great potential to recover REEs in AMD. Overall, this study offers a promising strategy for the green and sustainable REEs recovery and wastewater treatment.

Enhanced ammonia nitrogen and phenol removal by immobilized bacteria through composite mycelium pellet-driven quinone redox cycle

The composite mycelium pellet (CMP) was coupled with Pseudomonas sp. Y1 (CMP-Y1) to remove phenol and ammonia nitrogen (NH4+-N). The CMP was formed by the self-assembly of fungal mycelium with sponge iron (SIO), gallic acid (GA), and oxalic acid. The results showed that CMP with abundant pore size and successful internal loading of sponge iron containing iron nanoparticles. CMP could induce GA redox cycle to form Fenton-like reaction and thus achieve efficient phenol removal (93.32%, 24 h). Meanwhile, the removal efficiencies of phenol, NH4+-N, and chemical oxygen demand (COD) using CMP-Y1 at 12 h were 93.71, 92.40, and 89.00%, respectively. The increase in the electron transfer activity of strain Y1 by the addition of CMP could facilitate the nitrogen removal processes. In addition, high-throughput sequencing results indicated the abundance of antioxidant and repair genes was increased, which might be a strategy of strain Y1 to cope with oxidative stress. This strategy provided the possibility for the practical application of the combination of advanced oxidation and biological treatment, and offered new insights into the symbiotic system of fungi and bacteria.

Functional fungal pellets self-immobilized by mycelium fragments of Irpex lacteus WRF-IL for efficient degradation of sulfamethazine as the sole carbon source

In order to achieve an efficient microbial material with dual functions of self-immobilization and sulfamethazine (SMZ) degradation, this study explored the pelletization technique utilizing mycelium fragments of Irpex lacteus WRF-IL and systematically examined the pellets formation conditions and degradation capability. The Box-Behnken design results demonstrated that pure mycelium fragments, broken by frosted glass beads, could be rapidly self-immobilized to form white rot mycelial pellets (WRMPs) within 24 h, serving as the pelleting core. These WRMPs could completely remove SMZ as the sole carbon source within 20 h. The addition of sucrose expedited this process, achieving complete removal within only 14 h. Kinetic analysis showed that WRMPs could potentially remove SMZ at higher concentrations (>25 mg/L). Biodegradation was the primary pathway of SMZ removal. Seven intermediates were identified by QTOF LC/MS, and three transformation pathways initiated by SO₂ overflow, molecular rearrangement, and aniline moiety oxidation were deduced.

Pseudomonas stutzeri Immobilized Sawdust Biochar for Nickel Ion Removal

Nickel ions generated from the electroplating industry and stainless steel and battery manufacturing industries contribute to water pollution, harm human health, and pose environmental risks. A long-term, sustainable, and efficient treatment method should be developed to address this issue. Bioremediation in the presence of biochar and microorganisms is a potential approach for metal ion abatement. This study evaluates the feasibility of Pseudomonas stutzeri immobilized sawdust biochar (PSDB) for Ni2+ removal. Sawdust biochar was prepared by pyrolyzing in a muffle furnace and was characterized using SEM, FTIR, and BET. The influence of biochar preparation parameters such as pyrolysis temperature, time on biochar yield, and impact on cell immobilization was investigated. The effect of various parameters, such as incubation time, pH, temperature, and biocatalyst dosage, was studied. The total Ni2+ in solution was analyzed using inductively coupled plasma optical emission spectrometry. PSDB showed an 83% Ni2+ removal efficiency and reusability up to three cycles. FT-IR analysis revealed that the mechanism of Ni2+ removal by PSDB was the synergistic effect of adsorption by biochar and bioaccumulation by P. stutzeri. This study presents a novel approach for environmental application by utilizing waste biomass-derived biochar as a carrier support for bacteria and an adsorbent for pollutants.

Effect of fungal pellets on denitrifying bacteria at low carbon to nitrogen ratio: Nitrate removal, extracellular polymeric substances, and potential functions

This research aims to elucidate the effect of fungal pellets (FP) on denitrifying bacteria regarding nitrate (NO₃^--N) removal, extracellular polymeric substances (EPS), and potential functions at a low carbon to nitrogen (C/N) ratio. A symbiotic system of FP and denitrifying bacteria GF2 was established. The symbiotic system showed 100% NO₃^--N removal efficiency (4.07 mg L^-1 h^-1) at 6 h and enhanced electron transfer capability at C/N = 1.5. The interactions between FP and denitrifying bacteria promoted the production of polysaccharides (PS) in EPS. Both the increased PS and the PS provided by FP as well as protein and humic acid-like substances in EPS could be consumed by denitrifying bacteria. FP acted as a protector and provided habitat and nutrients for denitrifying bacteria as well as improved the ability of carbohydrate metabolism, amino metabolism, and nitrogen metabolism of denitrifying bacteria. This study provides a new perspective on the relationship between FP and denitrifying bacteria.

Bio-flocculation of Microcystis aeruginosa by using fungal pellets of Aspergillus oryzae: Performance and mechanism

Algal blooms caused by eutrophication are global phenomena that seriously threaten the sustainable use of freshwater resources. Traditional water treatment chemicals often typically lead to high levels of residue and cause damage to the morphology of algal cells. This study investigated an eco-friendly fungal bio-flocculant, Aspergillus oryzae, to remove the representative microalgae (Microcystis aeruginosa). Furthermore, it explored crucial flocculation parameters, adsorption kinetics, and thermodynamics of microalgae using A. oryzae. Accordingly, a flocculation efficiency of >95% was achieved when the fungus was cultured for six days, flocculant dosage was 11 g/L, rotation speed was 100 rpm, temperature was 25 °C, flocculation time was 5 h, and pH ranged between 4.0 and 9.0. KEGG analysis based on the genomic data, and chemical composition analysis revealed that proteins and polysaccharides were the major components of metabolites. Zeta potential analysis, scanning electron microscopy, three-dimensional fluorescence, X-ray spectroscopy, and infrared spectroscopy, electrostatic attraction revealed that electrostatic attraction promoted the destabilization and aggregation of microalgae. Additionally, hyphal surface adsorption and chemisorption from extracellular proteins and exopolysaccharides aided in the removal of microalgae. Therefore, fungi-based bio-flocculants have the potential to remove microalgae in a simple, effective, and eco-friendly manner without the complex extraction of extracellular metabolites.

Enhanced removal of fluoride, nitrate, and calcium using self-assembled fungus-flexible fiber composite microspheres combined with microbially induced calcium precipitation

Self-assembled fungus-flexible fiber composite microspheres (SFFMs) were firstly combined with microbially induced calcium precipitation (MICP) in a continuous-flow bioreactor and achieved the efficient removal of fluoride (F^-), nitrate (NO₃^-), and calcium (Ca²⁺). Under the influent F^- of 3.0 mg L^-1, pH of 7.0, and HRT of 8 h, the average removal efficiencies reached 77.54%, 99.39%, and 67.25% (0.29, 2.03, and 8.34 mg L^-1 h^-1), respectively. Fluorescence spectrum and flow cytometry analyses indicated that F^- content significantly affected the metabolism and viability of bacteria. SEM images showed that flexible fibers and intertwined hyphae provided effective locations for bacterial colonization in SFFMs. The precipitated products were characterized by XRD and FTIR, which revealed that F^- was mainly removed in the form of calcium fluoride and calcium fluorophosphate (CaF₂ and Ca₅(PO₄)₃F). High-throughput analysis at different levels demonstrated that Pseudomonas sp. WZ39 acted as the core strain, which played a crucial role in the bioreactor. The mechanism of enhanced denitrification was attributed to minor F^- stress and bioaugmentation technology. This study highlighted the superiorities of SFFMs and MICP combined remediation and documented a promising option for F^-, NO₃^-, and Ca²⁺ removal.

Role of ascomycete and basidiomycete fungi in meeting established and emerging sustainability opportunities: a review

Fungal biomass is the future's feedstock. Non-septate Ascomycetes and septate Basidiomycetes, famously known as mushrooms, are sources of fungal biomass. Fungal biomass, which on averagely comprises about 34% protein and 45% carbohydrate, can be cultivated in bioreactors to produce affordable, safe, nontoxic, and consistent biomass quality. Fungal-based technologies are seen as attractive, safer alternatives, either substituting or complementing the existing standard technology. Water and wastewater treatment, food and feed, green technology, innovative designs in buildings, enzyme technology, potential health benefits, and wealth production are the key sectors that successfully reported high-efficiency performances of fungal applications. This paper reviews the latest technical know-how, methods, and performance of fungal adaptation in those sectors. Excellent performance was reported indicating high potential for fungi utilization, particularly in the sectors, yet to be utilized and improved on the existing fungal-based applications. The expansion of fungal biomass in the industrial-scale application for the sustainability of earth and human well-being is in line with the United Nations' Sustainable Development Goals.

Fungal-sponge composite carriers coupled with denitrification and biomineralization bacteria to remove nitrate, calcium, and cadmium in a bioreactor

The coexistence of nitrate (NO₃^--N) and heavy metals in the aquatic environment causes harm to both the aquatic ecosystem and human health. Here, fungal-sponge composite carriers (FSC) were assembled and immobilized with strain WZ39 in a bioreactor to remove NO₃^--N, Ca²⁺, and Cd²⁺. Stable bioreactor performance under heavy metal pressure was achieved. The highest removal efficiencies of NO₃^--N, Ca²⁺, and Cd²⁺ reached 100, 71.81, and 92.50%, respectively. Bacteria and precipitates were found in fungal mycelium and sponge. The precipitates composed of Ca_3.9(Ca_4.7Cd_0.7)(PO₄)₆(OH)_1.8, CaCO₃, and CdCO₃. Fluorescence excitation-emission matrix (EEM) and flow cytometric (FCM) analysis indicated bacteria in FSC exhibited a strong metabolic activity and high percentage of intact cells under heavy metal stress. High-throughput sequencing results showed Pseudomonas sp. WZ39 played a major role in the bioreactor. The potential functions associated with metabolism, heavy metal transfer, and biofilm formation had high relative abundance in the bioreactor.

A review on mycelial pellets as biological carriers: Wastewater treatment and recovery for resource and energy

Mycelial pellets, a new environment friendly biological carrier, have received wide attention from researchers due to porosity, stability and unique biocompatibility. In this article, the theoretical basis and mechanism of mycelial pellets as a biological carrier were analyzed from the properties of mycelial pellets and the interaction between mycelial pellets and other microorganisms. This article aims to collate and present the current application and development trend of mycelial pellets as biological carriers in wastewater treatment, resource and energy recovery, especially the symbiotic particle system formed by mycelial pellets and microalgae is an important way to break through the technical bottleneck of biodiesel recovery from wastewater. This review also analyzes the research hotspots and trends of mycelial pellets as carriers in recent years, discusses the challenges faced by this technology, and puts forward corresponding solutions.