High-efficiency removal of lead/cadmium from wastewater by MgO modified biochar derived from crofton weed

Design, characterization and implementation of cost-effective sodium alginate/water hyacinth microspheres for remediation of lead and cadmium from wastewater

The aquatic plant water hyacinth was dried then cross-linked with sodium alginate to produce ionic cross-linked microspheres. The mechanism of controlling cadmium (Cd) and lead (Pb) in wastewater was tested by DFT at B3LYP level using LANL2DZ basis set. Modeling results indicated that the hydrated metals could interact with sodium alginate (SA)/water hyacinth (WH) microspheres through hydrogen bonding. Adsorption energies showed comparable results while total dipole moment and HOMO/LUMO band gap energy showed slight selectivity towards the remediation of Pb. FTIR spectra of cross-linked microspheres indicated that WH is forming a composite with SA to change its structure into a microsphere to remove Cd and Pb from water. Raman mapping revealed that the active sites along the surface of the microspheres enable for possible adsorption of metals through its surface. This finding is supported by molecular electrostatic potential and optical confocal microscopy. Atomic absorption spectroscopy results confirmed that the microspheres are more selective for Pb than Cd. It could be concluded that WH cross-linked with SA showed the potential to remove heavy metals through its unique active surface as confirmed by both molecular modeling and experimental findings.

Adsorptive removal of phosphate from water with biochar from acacia tree modified with iron and magnesium oxides

A novel biochar (BC) from Acacia tortilis trees pruning waste was synthesized and tested for the removal of phosphate from aqueous solutions. The BC was prepared by calcination at 600 °C and doped with Fe3O4 and MgO by hydrothermal process. The presence of iron and magnesium ions in the modified BC was confirmed by EDS analysis and X-ray diffraction (XRD) methods. Both unmodified and doped BCs were tested for phosphate removal from synthetic 1-500 ppm aqueous solutions. While the unmodified BC did not show any significant removal of phosphate from aqueous solutions, the modified BC almost completely removed phosphate from water. The enhancement in removal efficiency is due to an increase in the overall surface charge and surface area of BC as a result of doping with Fe3O4 and MgO salts. The average porosity and BET surface area corresponding to the plain BC increased by more than 20% from 322 to 394 m2/g after modification by impregnation with iron oxide and magnesium oxide. The modificaiton of BC with Fe3O4 and MgO nanoparticles was observed to increase the point of zero electric charge (PZC) from pH 3.4 (corresponding to plain BC) to pH 5.3 (corresponding to modified BC). The adsorption process was very fast and a phosphate removal value of 82.5% was reached only after 30 min of adsorption, while the removal efficiency after 4 h of adsorption was 97.5%. The rapid removal efficiency in short contact time is attributed to the high surface area of BC and strong bonding between the modified BC surface and PO43- ions. The highest adsorption capacity was observed to correspond to 98.5 mg/g which was achieved at PO43- concentration of 500 ppm and pH 8.5. Moreover, after fitting the adsorption data onto four of the most widely used adsorption isotherm models, the adsorption of PO43- onto BC can be better described by the Langmuir isotherm model.

Norfloxacin adsorption by torrefied coco peat biochar as a novel adsorbent in a circular economy framework

The current study reported torrefied coco-peat biochar treated at 200 °C, as a novel adsorbent exhibiting phenomenal norfloxacin (NFX) adsorption efficiency. The CHNS analysis confirmed the carbon abundance in the biochar (36.45%), however, XRF analysis indicated a significant presence of K2O (27.73%) and chlorine (7.49%). The XRD and Raman spectral analysis confirmed the amorphous structure of the biochar. Multilayer topology was evident in the SEM micrograph of biochar contributing to its large effective surface area. Additionally, the mesoporous structure of the adsorbent was verified by BET. The adsorption mechanism was predicted to be non-ionic since the zeta potential of both adsorbent and adsorbate was found negative. The process parameters were optimized at 30 °C, pH 6.9, dosage 7 g/L, antibiotic load 494.25 mg/L, and time of 89 min for a maximum of 99.52% adsorption of NFX using Central Composite Design, Analysis of Variance, and Response Surface Methodology. The adsorption process was exothermic, and spontaneous obeying the pseudo-second-order kinetics, while the bulk process was confined to surface adsorption. Isotherm study of NFX adsorption revealed the process to be a favorable, monolayer, and homogeneous adsorption. The NFX molecules were desorbed with an efficiency of 89.19% using 80% ethanol and upon recrystallization, 87.76% of the initial NFX was recovered as crude crystal. Moreover, the NFX removal efficiency was consistent across various water systems, tap water (99.02%), seawater (99.56%), river water (98.92%), pond water (98.26%), and distilled water (99.17%). The techno-economic analysis identified bulk expense as the biochar preparation ($0.82/kg) and the process will be profitable having recovered NFX sold at $6/kg instead of the present retail price ($71/kg). Thus, the study successfully demonstrated a zero-waste, self-sustainable, and revenue-generating water treatment process implementing the circular economy framework.

Experimental and computational studies of crystal violet removal from aqueous solution using sulfonated graphene oxide

Positively charged contaminants can be strongly attracted by sulfanilic acid-functionalized graphene oxide. Here, sulfonated graphene oxide (GO-SO3H) was synthesized and characterized for cationic crystal violet (CV) adsorption. We further studied the effect of pH, initial concentration, and temperature on CV uptake. The highest CV uptake occurred at pH 8. A kinetic study was also carried out by applying the pseudo-first-order and pseudo-second-order models. The pseudo-second-order's adsorption capacity (qe) value was much closer to the experimental qe (qeexp:0.13, qecal:0.12) than the pseudo-first-order model (qeexp:0.13, qecal:0.05). The adsorption performance was accomplished rapidly since the adsorption equilibrium was closely obtained within 30 min. Furthermore, the adsorption capacity was significantly increased from 42.85 to 79.23%. The maximum adsorption capacities of GO-SO3H where 97.65, 202.5, and 196.2 mg·g-1 for CV removal at 298, 308, and 328 K, respectively. The Langmuir and Freundlich adsorption isotherms were applied to the experimental data. The data fit well into Langmuir and Freundlich except at 298 K, where only Langmuir isotherm was most suitable. Thermodynamic studies established that the adsorption was spontaneous and endothermic. The adsorption mechanism was revealed by combining experimental and computational methods. These findings suggest that GO-SO3H is a highly adsorbent for removing harmful cationic dye from aqueous media.

Graphene oxide@Fe3O4-decorated iota-carrageenan composite for ultra-fast and highly efficient adsorption of lead (II) from water

The aggravated problem of lead pollution, especially in aquatic environments, necessitates the development of eminent adsorbents that could radically solve this environmental problem. Hence, a new composite was constructed based on iota carrageenan (i.Carr), graphene oxide (GO) and magnetite (Fe3O4) for removing noxious Pb2+ ions. The GO@Fe3O4-i.Carr composite was characterized by VSM, SEM, XPS, XRD, FTIR and Zeta potential. The removal of Pb2+ ions attained a quick equilibrium of almost 30 min with a removal efficiency reaching 93.68 %. The removal of Pb2+ was boosted significantly, in the order of GO@Fe3O4-i.Carr(1:1) > GO@Fe3O4-i.Carr(1:3) > GO@Fe3O4-i.Carr(3:1). Moreover, acquired experimental data fitted the pseudo 2nd order kinetic model and Freundlich isotherm model with a maximal monolayer adsorption capacity reached 440.05 mg/g. Notably, after five adsorption runs, the composite maintained its removal efficiency exceeding 74 %. The assumed adsorption mechanisms of Pb2+ onto GO@Fe3O4-i.Carr were complexation, precipitation, Lewis acid-base, and electrostatic attraction forces. Overall, the GO@Fe3O4-i.Carr composite elucidated the auspicious adsorbent criteria, comprising fast adsorption with high performance, ease-separation and tolerable recyclability, advising its feasible use to decontaminate water bodies from hazardous heavy metals.

Efficient removal of heavy metal and antibiotics from wastewater by phosphate-modified hydrochar

The preparation, characterization and adsorption performance of the phosphate-modified hydrochar (P-hydrochar) for Pb(II) and ciprofloxacin removal are investigated. Pb(II) and ciprofloxacin adsorption behavior fit well with the Hill model with the adsorption capacity of 119.61 and 98.38 mg/g, respectively. Pb(II) and ciprofloxacin adsorption kinetic process are accurately described by the Pseudo-second-order. Pb(II) and ciprofloxacin have synergy in the binary contaminant system, which reveals that Pb(II) adsorption amount is augmented. While ciprofloxacin adsorption amount is also augmented at low Pb(II) concentration and hindered at high Pb(II) concentration. Pb(II) adsorption mechanisms on P-hydrochar (e.g. precipitation, π-π interaction and complexation) are different from the ciprofloxacin (e.g. hydrogen bonding, pore filling, electrostatic attraction). Pb(II) and ciprofloxacin adsorption process are further analyzed by the density functional theory. The coexisted ions have little influenced on Pb(II) and ciprofloxacin adsorption. P-hydrochar still has large Pb(II) and ciprofloxacin adsorption capacity after five cycles. This result indicates that poplar sawdust waste can be converted into an efficient adsorbent to remove Pb(II) and ciprofloxacin from wastewater,.

A novel magnetic sludge biochar was prepared by making full use of internal iron in sludge combining KMnO4-NaOH modification to enhance the adsorption of Pb (Ⅱ), Cu (Ⅱ) and Cd (Ⅱ)

This study synthesized novel magnetic biochar (PCMN600) by KMnO4-NaOH combined modification using iron-containing pharmaceutical sludge to remove toxic metals from wastewater effectively. Various characterization experiments of engineered biochar showed that the modification process introduced ultrafine MnOx particles on the carbon surface and resulted in higher BET surface area and porosity along with more oxygen-containing surface functional groups. Batch adsorption studies indicated that the maximum adsorption capacities of PCMN600 for Pb2+, Cu2+ and Cd2+ were 181.82 mg/g, 30.03 mg/g and 27.47 mg/g, respectively, at a temperature of 25 °C and pH of 5.0, which were much higher than that of pristine biochar (26.46 mg/g, 6.56 mg/g and 6.40 mg/g). The adsorption datums of three toxic metal ions fitted well to the pseudo-second-order model and Langmuir isotherm, and the sorption mechanisms were identified as electrostatic attraction, ion exchange, surface complexation, cation-π interaction and precipitation. The strong magnetic properties of the engineered biochar endowed the adsorbent with remarkable reusability, and after five cycles of recycling, PCMN600 still retained nearly 80% of its initial adsorption capacities.

KOH-modified bamboo charcoal loaded with α-FeOOH for efficient adsorption of copper and fluoride ions from aqueous solution

In this work, bamboo charcoal (BC) is prepared by pyrolysis of bamboo. Then, KOH modification and surface deposition of Goethite (α-FeOOH) are performed to obtain a new KOH-modified BC loaded with α-FeOOH (FKBC) adsorbent for copper (Cu2+) and fluoride (F-) ion adsorption from aqueous solution. Surface morphology and physiochemical properties of the prepared adsorbent are characterized by scanning electron microscopy-energy dispersive spectrometer, X-ray diffraction, and N2 adsorption-desorption. The effect of pH, contact time, adsorbent dosage, and initial concentration on Cu2+ and F- adsorption is also investigated. In addition, adsorption kinetics and isotherms are fitted to pseudo-second-order kinetics and Langmuir model, respectively. Thermodynamic parameters suggest that the adsorption process is spontaneous and endothermic. The adsorption mechanism is further characterized by Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy. The Cu2+ absorption mainly occurs through ion exchange, coordination reactions, and surface precipitation, while the F- adsorption mainly occurs via ion exchange and hydrogen bonding. The selective adsorption experiments reveal that FKBC has good selectivity for Cu2+ and F-. The adsorption-desorption experimental results indicate that FKBC can be reused for Cu2+ and F- adsorption after regeneration. Results indicate that FKBC can be a promising adsorbent for Cu2+ and F- removal from aqueous solutions.

Use of thermally activated Fenton sludge for Cd removal in zinc smelter wastewater: Mechanism and feasibility of Cd removal

Fenton sludge is a byproduct of the Fenton process that contains large amounts of Fe and Ca. Because of the secondary contamination generated during the disposal of this byproduct, ecofriendly treatment methods are needed. In this study, we used Fenton sludge to remove the Cd discharged from a zinc smelter factory, using thermal activation to enhance the Cd adsorption capacity. Among the various temperatures considered (300-900 °C), the Fenton sludge that was thermally activated at 900 °C (TA-FS-900) adsorbed the highest amount of Cd because of its high specific surface area and high Fe content. Cd was adsorbed onto TA-FS-900 via complexation with C-OH, C-COOH, FeO-, and FeOH and cation exchange with Ca2+. The maximum adsorption of TA-FS-900 was 260.2 mg/g, indicating that TA-FS-900 is an efficient adsorbent, comparable to those reported in the literature. The initial Cd concentration in the zinc smelter wastewater discharged was 105.7 mg/L, 98.4% of which was removed by applying TA-FS-900, suggesting the applicability of TA-FS-900 for real wastewater containing high concentrations of various cations and anions. The leaching of heavy metals from TA-FS-900 was within the EPA standard limits. We concluded that the environmental impact of Fenton sludge disposal can be reduced, and the use of Fenton sludge can add value to the treatment of industrial wastewater in terms of the circular economy and environment.

Functional Materials for Water Restoration: A "Fish Cage" for Efficient Capture of Pb(II) Ions

In this work, a "fish cage" material for trapping Pb(II) ions has been successfully obtained, which is a novel clathrate functionalized metal-oganic framework (Cage-MOF) by introducing free adsorption sites (SO42-). The three-dimensional (3D) cage structure of Cage-MOF gives it a larger contact area and can capture "swimming fish" (Pb(II)) like a "fishing cage" in a water solution. This is the first high-efficiency adsorption material obtained by introducing free coordination groups. Cage-MOF not only has excellent water stability but also improves the selectivity and affinity for Pb(II) ions in water because of the presence of sulfate adsorption sites, and its adsorption capacity is as high as 806 mg/g. This work shows a novel and effective idea for the synthesis of water restoration materials.

Synthesis and Characterization of MC/TiO2 NPs Nanocomposite for Removal of Pb2+ and Reuse of Spent Adsorbent for Blood Fingerprint Detection

The removal of toxic heavy metals from wastewater through the use of novel adsorbents is expensive. The challenge arises after the heavy metal is removed by the adsorbent, and the fate of the adsorbent is not taken care of. This may create secondary pollution. The study aimed to prepare mesoporous carbon (MC) from macadamia nutshells coated with titanium dioxide nanoparticles (TiO2 NPs) using a hydrothermal method to remove Pb2+ and to test the effectiveness of reusing the lead-loaded spent adsorbent (Pb2+-MC/TiO2 NP nanocomposite) in blood fingerprint detection. The samples were characterized using SEM, which confirmed spherical and flower-like structures of the nanomaterials, whereas TEM confirmed a particle size of 5 nm. The presence of functional groups such as C and Ti and a crystalline size of 4 nm were confirmed by FTIR and XRD, respectively. The surface area of 1283.822 m2/g for the MC/TiO2 NP nanocomposite was examined by BET. The removal of Pb2+ at pH 4 and the dosage of 1.6 g/L with the highest percentage removal of 98% were analyzed by ICP-OES. The Langmuir isotherm model best fit the experimental data, and the maximum adsorption capacity of the MC/TiO2 NP nanocomposite was 168.919 mg/g. The adsorption followed the pseudo-second-order kinetic model. The ΔH° (-54.783) represented the exothermic nature, and ΔG° (-0.133 to -4.743) indicated that the adsorption process is spontaneous. In the blood fingerprint detection, the fingerprint details were more visible after applying the Pb2+-MC/TiO2 NP nanocomposite than before the application. The reuse application experiments showed that the Pb2+-MC/TiO2 NP nanocomposite might be a useful alternative material for blood fingerprint enhancement when applied on nonporous surfaces, eliminating secondary pollution.

Biochar-supported magnesium oxide as high-efficient lead adsorbent with economical use of magnesium precursor

With unique porous structure inherited from lignocellulose, biochar was an appropriate carrier for small-size MgO materials, which could simplify the synthetic process and better solve agglomeration and separation problems during adsorption. Biochar-supported MgO was prepared with impregnation method. Under different synthesis conditions, the obtained MgO presented diverse properties, and moderate pyrolysis condition was conducive to the improvement of Mg conversion rate. The Pb(II) capacity was highly correlated with Mg content, rather than the specific surface area. Reducing the pyrolysis temperature or increasing the usage of supporter could improve adsorption efficiency when using Mg content-normalized capacity as the criterion. The better release ability of Mg, contribute by the higher extent of hydration and better spread of MgO, were the critical factors. The maximal Mg content-normalized capacity could reach 0.932 mmol·mmol-Mg^-1 with the mass ratio of biochar/MgCl₂·6H₂O = 4:1 at the pyrolysis temperature of 600 °C. Considering the ultimate utilization efficiency of Mg in precursor, the optimum Mg consumption-normalized capacity was 0.744 mmol·mmol-Mg^-1 with the mass ratio of biochar/MgCl₂·6H₂O = 1:1 at 600 °C.

Heavy metal pollution in the aquatic environment: efficient and low-cost removal approaches to eliminate their toxicity: a review

Heavy metal contamination of water sources has emerged as a major global environmental concern, threatening both aquatic ecosystems and human health. Heavy metal pollution in the aquatic environment is on the rise due to industrialization, climate change, and urbanization. Sources of pollution include mining waste, landfill leachates, municipal and industrial wastewater, urban runoff, and natural phenomena such as volcanic eruptions, weathering, and rock abrasion. Heavy metal ions are toxic, potentially carcinogenic, and can bioaccumulate in biological systems. Heavy metals can cause harm to various organs, including the neurological system, liver, lungs, kidneys, stomach, skin, and reproductive systems, even at low exposure levels. Efforts to find efficient methods to remove heavy metals from wastewater have increased in recent years. Although some approaches can effectively remove heavy metal contaminants, their high preparation and usage costs may limit their practical applications. Many review articles have been published on the toxicity and treatment methods for removing heavy metals from wastewater. This review focuses on the main sources of heavy metal pollution, their biological and chemical transformation, toxicological impacts on the environment, and harmful effects on the ecosystem. It also examines recent advances in cost-effective and efficient techniques for removing heavy metals from wastewater, such as physicochemical adsorption using biochar and natural zeolite ion exchangers, as well as decomposition of heavy metal complexes through advanced oxidation processes (AOPs). Finally, the advantages, practical applications, and future potential of these techniques are discussed, along with any challenges and limitations that must be considered.

Adsorption of nitrophenol onto a novel Fe3O4-κ-carrageenan/MIL-125(Ti) composite: process optimization, isotherms, kinetics, and mechanism

Water pollution is a dreadful affair that has incessantly aggravated, exposing our planet to danger. In particular, the persistent nitro aromatic compound like nitrophenols causes anxiety to the researchers due to their hazardous impacts, excessive usage, and removal difficulty. For this purpose, a novel multi-featured composite was constructed based on κ-Carrageenan (κ-Carr), MOF (MIL-125(Ti)), and magnetic Fe3O4 for efficient adsorptive removal of o-nitrophenol (o-NP). Interestingly, BET measurements revealed the high surface area of Fe3O4-κ-Carr/MIL-125(Ti) of about 163.27 m2/g, while VSM showed its excellent magnetic property (20.34 emu/g). The comparison study pointed out the synergistic effect between Fe3O4, κ-Carr, and MIL-125(Ti), forming a composite with an excellent adsorption performance toward o-NP. The adsorption data obeyed pseudo-second-order kinetic model, and Freundlich isotherm model was better fitted than Langmuir and Temkin. Furthermore, Langmuir verified the supreme adsorption capacity of o-NP onto Fe3O4-κ-Carr/MIL-125(Ti) since the computed qmax reached 320.26 mg/g at pH 6 and 25 °C. Furthermore, the XPS results postulated that the adsorption mechanism pf o-NP proceeded via H-bonding, π-π interaction, and electron donor-acceptor interactions. Interestingly, Fe3O4-κ-Carr/MIL-125(Ti) composite retained good adsorption characteristics after reusing for five cycles, suggesting its viable applicability as an efficient, renewable, and easy-separable adsorbent for removing nitro aromatic pollutants.

Municipal Sewage Sludge as a Source for Obtaining Efficient Biosorbents: Analysis of Pyrolysis Products and Adsorption Tests

In the 21st century, the development of industry and population growth have significantly increased the amount of sewage sludge produced. It is a by-product of wastewater treatment, which requires appropriate management due to biological and chemical hazards, as well as several legal regulations. The pyrolysis of sewage sludge to biochar can become an effective way to neutralise and use waste. Tests were carried out to determine the effect of pyrolysis conditions, such as time and temperature, on the properties and composition of the products obtained and the sorption capacity of the generated biochar. Fourier transform infrared analysis (FTIR) showed that the main components of the produced gas phase were CO₂, CO, CH₄ and to a lesser extent volatile organic compounds. In tar, compounds of mainly anthropogenic origin were identified using gas chromatography mass spectrometry (GC-MS). The efficiency of obtaining biochars ranged from 44% to 50%. An increase in the pyrolysis temperature resulted in a decreased amount of biochar produced while improving its physicochemical properties. The biochar obtained at high temperatures showed the good adsorption capacity of Cu²⁺ (26 mg·g^-1) and Zn²⁺ (21 mg·g^-1) cations, which indicates that it can compete with similar sorbents. Adsorption of Cu²⁺ and Zn²⁺ proceeded according to the pseudo-second-order kinetic model and the Langmuir isotherm model. The biosorbent obtained from sewage sludge can be successfully used for the separation of metal cations from water and technological wastewater or be the basis for producing modified and mixed carbon sorbents.

Rapid and Effective Lead Elimination Using Cow Manure Derived Biochar: Balance between Inherent Phosphorus Release and Pollutants Immobilization

Cow manure derived biochar (CMBC) can serve as a promising functional material, and CMBC can be regarded as an ecofriendly approach compared to conventional ones. CM bioadsorbent can be employed for heavy metal immobilization (such as for lead) as well as an amendment to increase soil fertility (e.g., phosphorus). Few studies have examined the surface interactions between pollutants and bioadsorbents when inherent nutrient release is present. In this work, CMBC was prepared and applied for Pb(II) removal, and the vital roles of released phosphorus from CMBC were comprehensively disclosed. Furthermore, CMBC could immobilize part of the Pb(II) in soil and promote plant growth. CM400 was an effective adsorbent whose calculated Q_e reached 691.34 mg·g^-1, and it rapidly adsorbed 98.36 mg·g^-1 of Pb(II) within 1 min. The adsorption mechanisms of Pb(II) by CMBC include ion exchange, physical adsorption, electrostatic attraction, chemical precipitation, surface complexation, and cation-π bond interaction. Based on the residual phosphorus content and adsorption effect, complexation rather than the chemical precipitation had a greater contribution toward adsorption. Besides, as the concentration of Pb(II) increased, the main adsorption mechanisms likely transformed from chemical precipitation to ion exchange and complexation. CMBC not only had a good effect on Pb(II) removal in the solution, but also immobilized the Pb(II) in soil to restrain plant uptake as well as promote plant growth. The main novelty of this work is providing more insights to the cow manure bio adsorbent on Pb immobilization and phosphorus release. This study is expected to serve as a basis and reference for analyzing the release effects of inherent nutrients and the interfacial behaviors with heavy metals when using CMBC and other nutrient-rich carbon-based fertilizers for pollution control.

Highly Efficient Removal of Lead/Cadmium by Phosphoric Acid-Modified Hydrochar Prepared from Fresh Banana Peels: Adsorption Mechanisms and Environmental Application

In this work, a phosphoric acid (H₃PO₄)-modified hydrochar (BPH200) was prepared at a low temperature (200 °C) in an air atmosphere with fresh banana peels as the raw material. The Cd²⁺ and Pb²⁺ adsorption behaviors and mechanisms of BPH200 were explored. As the temperature rose, co-hydrothermal carbonization of the banana peels and H₃PO₄ enhanced the transformation of phosphorus (P) species. More orthophosphate and metaphosphate were found in BPH200 than in banana peel hydrochar (BP) without modification. The adsorption kinetics for Cd²⁺ and Pb²⁺ followed the pseudo-second-order model. The Redlich-Peterson model best fit the experimental results of the adsorption isotherm, with maximum adsorption capacities of 84.25 and 237.90 mg·g^-1 for Cd²⁺ and Pb²⁺, respectively. H₃PO₄ promoted Cd²⁺ and Pb²⁺ adsorption by forming precipitates, which, respectively, accounted for 32.75 and 41.12% of the total adsorption onto BPH200. In addition, the cation-exchange capacities of BPH200 with Cd²⁺ and Pb²⁺ were weakened compared with those of BP. However, complexation with these two ions strengthened, accounting for 26.68 and 32.81%, respectively, of the total adsorption capacity. This indicated that the adsorption of Cd²⁺ and Pb²⁺ onto BPH200 was dominated by precipitation with minerals and complexation with oxygen-containing functional groups. The removal rates of Cd²⁺ and Pb²⁺ by BPH200 from different water bodies were more than 99.95 and 99.97%, respectively. The addition of BPH200 also decreased the amounts of bioavailable Cd²⁺ and Pb²⁺ in the soil, resulting in relatively high immobilization rates of Cd²⁺ (67.13%) and Pb²⁺ (70.07%).

Enhanced lead and copper removal in wastewater by adsorption onto magnesium oxide homogeneously embedded hierarchical porous biochar

Removing non-biodegradable Pb²⁺ and Cu²⁺ is the top priority in wastewater purification, while adsorption is a green technology to remove them. Herein, MgO-embedded granular hierarchical porous biochar (HP-MgO@BC) was fabricated by pyrolysis of porous Mg-infused chitosan beads. MgO nanoparticles were homogeneously embedded throughout the hierarchical porous biochar matrix in a high-density and accessible manner, thus providing a large number of easily accessible adsorption sites. Pb²⁺ and Cu²⁺ sorption capacities on HP-MgO@BC are 1044.8 and 811.2 mg/g at pH 5, respectively. It could effectively remove Pb²⁺ and Cu²⁺ across a broad pH range of 2-7, and show excellent adsorption efficiency in the presence of interfering cations. It also possessed excellent reusability. In the fixed-bed operation, 7880 BV (78.80 L) and 1610 BV (16.10 L) of synthetic Pb²⁺ and Cu²⁺ wastewater could be purified by HP-MgO@BC packed column, respectively. The adsorption mechanism involves mineral precipitation, ion exchange, and surface coordination.

Preparation of valuable pyrolysis products from poplar waste under different temperatures by pyrolysis: Evaluation of pyrolysis products

Poplar waste is used as feedstock to prepare valuable pyrolysis products by pyrolysis under different temperature. The bio-oil is rich in aldehyde with the maximum relative content of 47.15%, which has potential application in chemical industries. Pyrolysis temperature has significantly influenced the composition and heating value of bio-gas. The maximum heating value of bio-gas is 14.56 MJ/Nm3. Biochar is used as an adsorbent to adsorb Ag+ from aqueous solution with the adsorption capacity of 76.09 mg/g. Biochar forms the value-added Ag-Biochar composite by reduction after adsorption Ag+. While, Ag-Biochar composite can be used as catalyst for methyl orange removal with the maximum removal of 94.08%. Ag-Biochar composite is also used as lithium ion battery cathode material for energy storage with the specific capacity of 345 mAh/g. Besides, preliminary economic analysis is used to evaluate the economics of pyrolysis process with the total annual revenue of $115, 725/year.

Synthesis of a new magnetic Sulfacetamide-Ethylacetoacetate hydrazone-chitosan Schiff-base for Cr(VI) removal

In this study, a novel magnetic organic-inorganic composite was fabricated. Where, Chitosan, sulfacetamide and ethylacetoacetae were used to prepare a new Sulfacetamide-Ethylacetoacetate hydrazone-chitosan Schiff-base (SEH-CSB) with a variety of active sites that capable of forming coordinate covalent bonds with Cr(VI). This was followed by modification of the formed SHE-CSB with NiFe₂O₄ to obtain the magnetic Chitosan-Schiff-base (NiFe₂O₄@SEH-CSB). NiFe₂O₄@SEH-CSB was characterized using FTIR, zeta potential, SEM, VSM and XPS. Results clarified that SHE played a crucial role in the removal of Cr(VI). The removal of Cr(VI) on NiFe₂O₄@SEH-CSB was found to be more fitted to pseudo-2nd order kinetics model and Freundlich isotherm. Besides, the maximum adsorption capacity of NiFe₂O₄@SEH-CSB for Cr(VI) was found to be 373.61 mg/g. The plausible mechanism for the removal of Cr(VI) on NiFe₂O₄@SEH-CSB composite suggested coulombic interaction, outer-sphere complexation, ion-exchange, surface complexation and coordinate-covalent bond pathways. The magnetic property enabled easy recycling of NiFe₂O₄@SEH-CSB composite.

Biochar and bio-oil fuel properties from nickel nanoparticles assisted pyrolysis of cassava peel

Direct biomass usage as a renewable fuel source and substitute for fossil fuels is discouraging due to high moisture, low energy density and low bulk density. Herein, thermogravimetric analysis (TGA) was conducted at various heating rates to determine peak decomposition temperatures for the dried cassava peels (DCP). The influence of pyrolysis temperature (300, 400, 500 and 600 °C) and heating rates (10, 20 and 30 °C/min) on the nickel nanoparticles catalyzed decomposition of DCP to produce biochar, bio-oil and biogas was investigated and characterized. The results revealed higher biochar (CBC) yield of 68.59 wt%, 62.55 wt% and 56.92 wt% at lower pyrolysis temperature of 300 °C for the different heating rates of 10, 20 and 30 °C/min. The higher carbon content of 52.39, 53.30 and 55.44 wt% was obtained at elevated temperature of 600 °C and heating rates of 10, 20 and 30 °C/min, respectively. At the pyrolysis temperature of 600 °C and heating rates of 10, 20 and 30 °C/min, the optimum yield of bio-oil (24.35, 17.69 and 18.16 wt%) and biogas (31.35, 42.03 and 46.12 wt%) were attained. A high heating value (HHV) of 28.70 MJ/kg was obtained for the biochar at 600 °C. Through the TGA, FTIR and HRSEM results, the thermal stability, hydrophobicity and structural changes of DCP and CBC samples were established. Similarly, the thermal stability of CBC samples increased with increasing pyrolysis temperature. Biochar with optimum fuel properties was produced at 600 °C due to the highest carbon content and high heating value (HHV). Improved kinematic viscosity (3.87 mm²/s) and density (0.850 g/cm³) were reported at the temperature of 300 °C and heating rate of 30 °C/min, while a higher pH (4.96), HHV (42.68 MJ/kg) and flash point (53.85 min) were presented by the bio-oil at the temperature of 600 °C and heating rate of 30 °C/min. Hence, DCP produced value-added biochar and bio-oil as renewable energy.

•

Nickel nanoparticles successfully catalyzed the pyrolysis of CP biomass.

•

Temperature and heating rates affected the yield of pyrolysis products.

•

Fixed carbon content increased rapidly with temperature increase.

•

The HHV of both biochar and bio-oil was higher than the DCP biomass.

•

The fuel properties of biochar and bio-oil improved rapidly through NiNPs catalyzed pyrolysis.

Applications of functionalized magnetic biochar in environmental remediation: A review

Magnetic biochar (MBC) is extensively applied on contaminants removal from environmental medium for achieving environmental-friendly remediation with reduction of secondary pollution owing to its easy recovery and separation. However, the summary of MBC synthesis methods is still lack of relevant information. Moreover, the adsorption performance for pollutants by MBC is limited, and thus it is imperative to adopt modification techniques to enhance the removal ability of MBC. Unfortunately, there are few reviews to present modification methods of MBC with applications for removing hazardous contaminants. Herein, we critically reviewed (i) MBC synthetic methods with corresponding advantages and limitations; (ii) adsorption mechanisms of MBC for heavy metals and organic pollutants; (iii) various modification methods for MBC such as functional groups grafting, nanoparticles loading and element doping; (iv) applications of modified MBC for hazardous contaminants adsorption with deep insight to relevant removal mechanisms; and (v) key influencing conditions like solution pH, temperature and interfering ions toward contaminants removal. Finally, some constructive suggestions were put forward for the practical applications of MBC in the near future. This review provided a comprehensive understanding of using functionalized MBC as effective adsorbent with low-cost and high-performance characteristics for contaminated environment remediation.

Microwave-assisted preparation of cotton stem-derived activated carbon for dye removal from synthetic wastewater

Cotton stem is used to produce the high-efficient adsorbent (CSA) for Rhodamine B (RB) dye removal from wastewater, and hydrogen rich fuel gas via on-pot method using microwave heating. The adsorption data indicate that RB adsorption behavior follows the Langmuir model with the maximum adsorption capacity of 265.96 mg/g, whereas the adsorption kinetics follows the pseudo-second-order model. Thermodynamic calculations indicate that RB adsorption on CSA is spontaneous and endothermic process. The adsorption data are fitted to the Thomas and Yoon-Nelson model to predict the breakthrough curve in the column experiment. The RB removal could still be maintained at 71.22% of the original value after five cycles, demonstrating the reusability of CSA. The chemical functional groups, electrostatic interaction, and pore filling of CSA are found to be responsible for high RB adsorption capability. CSA exhibits excellent RB removal efficiency in treating actual water. The major components of byproduct gases collected from activation process are H₂ and CO.

Simultaneous removal of Pb2+ and direct red 31 dye from contaminated water using N-(2-hydroxyethyl)-2-oxo-2H-chromene-3-carboxamide loaded chitosan nanoparticles

This study reports the preparation of a new material that can remove synthetic dyes and trace metals simultaneously. A new coumarin derivative was synthesized and its chemical structure was inferred from spectral data (FT-IR, 1H-NMR, 13C-NMR). Meanwhile, chitosan nanoparticles (CsNPs) were prepared then used as a carrier for two different concentrations of the coumarin derivative (C1@CsNPs and C2@CsNPs). The TEM, SEM and DLS findings illustrated that the prepared nanocomposites exhibited spherical shape and small size (less than 200 nm). The performance of the prepared material for the removal of an anionic dye (direct red 31, DR31) and cationic trace metal (Pb2+) was evaluated in unary and binary systems. The results revealed that complete removal of 10 mg L-1 of DR31 and Pb2+ in unary system was achieved at pHo 3.0 and 5.5 using 0.5 and 2.0 g L-1, respectively, of C2@CsNPs. The adsorption of DR31 and Pb2+ followed different mechanisms as deduced from the effect of pHo, kinetic, isotherm and binary adsorption studies. The adsorption of DR31 followed the Langmuir isotherm model and the pseudo-first-order kinetic model. While, the adsorption of Pb2+ followed Freundlich isotherm model and Elovich kinetic model. In the binary system, the co-presence of DR31 and Pb2+ did not affect the adsorption of each other's. Overall, the prepared material showed promising results for the removal of anionic dyes and cations trace metals from contaminated water.

The performance and mechanism of cadmium availability mitigation by biochars differ among soils with different pH: Hints for the reasonable choice of passivators

The performances of passivation materials mitigating Cadmium (Cd) bioavailability considerably vary with the pH condition of Cd-contaminated soils. However, less information was available for the method of improving Cd passivation efficiency taking into account the pH of the targeted soil. Furthermore, the underlying mechanism of Cd availability mitigation in soils with different pH has not been clearly explored. In this study, cotton straw biochar (CSB) and its modified products using NaOH (CSB-NaOH) were prepared and applied in two kinds of Cd-contaminated soils with different pH. It was found that CSB-NaOH was more effective than CSB in regulating the Cd bioavailability in the acid soil, while the opposite tendency was observed in alkaline soil. The difference of the Cd passivation efficiency is correlated with contributions of various Cd-biochar binding mechanisms, which cation exchange mechanism is largely eliminated for CSB-NaOH. The interaction of Cd with CSB/CSB-NaOH was further evidenced through characterization results of Scan Electron Microscopy (SEM), X-Ray Diffraction (XRD), Fourier-transformed infrared spectroscopy (FTIR) and X-ray Photoelectron spectroscopy (XPS). Characterization results proved that carboxyl, hydroxyl and ethyl groups were the key functional groups involved in Cd passivation. XPS results showed that Cd binding methods varied between CSB and CSB-NaOH, which Cd²⁺ and Cd-O were the main form of Cd binding to CSB while Cd-O was the main form on CSB-NaOH. In this work, it was demonstrated that in acid soil, pH change caused by biochar plays a more significant role in controlling the Cd bioavailability, while in alkaline soil, the strength of the Cd-biochar interaction is more decisive for the Cd passivation efficiency. This work provides information on how to select the suitable passivator to decrease the Cd bioavailability in terms of different soil pH and property.

Sulfonated graphene oxide impregnated cellulose acetate floated beads for adsorption of methylene blue dye: optimization using response surface methodology

New multi-featured adsorbent beads were fabricated through impregnation of sulfonated graphene (SGO) oxide into cellulose acetate (CA) beads for fast adsorption of cationic methylene blue (MB) dye. The formulated SGO@CA composite beads were thoroughly characterized by several tools including FTIR, TGA, SEM, XRD, XPS and zeta potential. The optimal levels of the most significant identified variables affecting the adsorption process were sequential determined by the response surface methodology (RSM) using Plackett–Burman and Box–Behnken designs. The gained results denoted that the surface of SGO@CA beads displayed the higher negative charges (− 42.2 mV) compared to − 35.7 and − 38.7 mV for pristine CA and SGO, respectively. In addition, the floated SGO@CA beads demonstrated excellent floating property, fast adsorption and easy separation. The adsorption performance was accomplished rapidly, since the adsorption equilibrium was closely gotten within 30 min. Furthermore, the adsorption capacity was greatly improved with increasing SGO content from 10 to 30%. The obtained data were followed the pseudo-second order kinetic model and agreed with Langmuir adsorption isotherm model with a maximum adsorption capacity reached 234.74 mg g⁻¹. The thermodynamic studies designated the spontaneity and endothermic nature of MB dye adsorption. Besides, the floated beads exposed acceptable adsorption characteristics for six successive reuse cycles, in addition to their better adsorption selectivity towards MB dye compared to cationic crystal violet and anionic Congo red dyes. These findings assume that the formulated SGO@CA floated beads could be used effectively as highly efficient, easy separable and reusable adsorbents for the fast removal of toxic cationic dyes.

Waste biomass based potential bioadsorbent for lead removal from simulated wastewater

Present study deals with the lead removal from simulated wastewater using cost effective bio-adsorbent of mango seeds cover with kernel (M), and jamun seeds cover with kernel (JP). Lead removal optimization of adsorption parameters has been analyzed by using Response surface methodology (RSM). The optimum adsorption was attained at speed of 500 rpm, 60 mg, pH 6.5 and contact time of 120 min. The adsorption capacities are around 39.15 mg/g of M and 20.28 mg/g of JP bio-adsorbent, and also the maximum Pb removal were observed ̴ 94.85% and 92.78%, respectively. The regression coefficient was best fitted for both bio-adsorbents are Freundlich model and pseudo-first order reaction kinetic.

KHCO3 activated biochar supporting MgO for Pb(II) and Cd(II) adsorption from water: Experimental study and DFT calculation analysis

A new strategy that simultaneous use of KHCO₃ activated biochar and nano-MgO incorporation for Pb²⁺ and Cd²⁺ removal from water was raised. After activating by KHCO₃, the BC showed a higher surface area and could carry more MgO nanoparticles the BC owned. The synthesized MgO-K-BC had a large adsorption capacity for Pb²⁺ (1625.5 mg/g) and Cd²⁺ (480.8 mg/g). Multiple characterization and comparative test have been performed to demonstrate that ion-exchange, precipitation, and complexation are the main mechanisms for Pb²⁺ and Cd²⁺ removal by MgO-K-BC. In order to further explore the adsorption mechanism in-depth, the density functional theory (DFT) calculation combined with experimental results were performed. The O-top of MgO was the most stable adsorption site for Pb²⁺/Cd²⁺ adsorption compared with other adsorption sites (Mg-top, bridge, and hollow). In addition, the results of charge density maps and projected density of state (PDOS) showed that the overlap of electron cloud and orbits between MgO and Pb²⁺ were denser than Cd²⁺, indicating that MgO-K-BC had a stronger affinity for Pb²⁺ than Cd²⁺, so that, MgO-K-BC had a higher adsorption capacity for Pb²⁺ than Cd²⁺. This work provides a deep understand of the mechanism for heavy metals adsorption by metal oxide and a practical and theoretical guidance for adsorbent preparation with high adsorption ability for heavy metal.

Enhanced bacterial inactivation by activated carbon modified with nano-sized silver oxides: Performance and mechanism

In this study, nano-sized silver oxides were loaded on activated carbon (nAg2O/AC) through a facile impregnation-calcination method for enhanced bacterial inactivation from drinking water, in which Escherichia coli (E. coli) was used as target bacteria. XRD and SEM characterization confirmed that nano-sized Ag2O particles (50-200 nm) were successfully prepared and uniformly distributed on the surfaces and pores of AC. Due to the structural reducing groups of AC, surface-bound Ag(I) was partially converted to Ag in the nAg2O matrix and the resulted Ag could sterilize E. coli directly. More importantly, surface-bound Ag could catalyze O2 and H2O to generate reactive oxygen species (ROS) for oxidation sterilization, thus significantly enhanced the inactivation efficiency from 0.8 log10 CFU/mL (nAg2O control) and 0.2 log10 CFU/mL (AC control) to 6.0 log10 CFU/mL in the nAg2O/AC system. The inactivation process was highly pH-dependent, and neutral pH was favorable for sterilization. A sterilization efficiency of 5.2 log10 CFU/mL could still be achieved after 5 running cycles, indicating stable sterilization performance of nAg2O/AC. In addition, the nAg2O/AC also exhibited excellent renewability since a sterilization efficiency of 5.8 log10 CFU/mL was obtained after nAg2O being stripped and reloaded on the AC. These results demonstrated that nAg2O-modified AC is an efficient material for sterilization in water treatment.

Manganese oxide-modified biochar: production, characterization and applications for the removal of pollutants from aqueous environments - a review

The development of manganese (Mn) oxides (MnOx) modified biochar (MnOBC) for the removal of pollutants from water has received significant attention. However, a comprehensive review focusing on the use of MnOBC for the removal of organic and inorganic pollutants from water is missing. Therefore, the preparation and characterization of MnOBC, and its capacity for the removal of inorganic (e.g., toxic elements) and organic (e.g., antibiotics and dyes) from water have been discussed in relation to feedstock properties, pyrolysis temperature, modification ratio, and environmental conditions here. The removal mechanisms of pollutants by MnOBC and the fate of the sorbed pollutants onto MnOBC have been reviewed. The impregnation of biochar with MnOx improved its surface morphology, functional group modification, and elemental composition, and thus increased its sorption capacity. This review establishes a comprehensive understanding of synthesizing and using MnOBC as an effective biosorbent for remediation of contaminated aqueous environments.

Cu-Doped magnetic loofah biochar for tetracycline degradation via peroxymonosulfate activation

The Cu-doped deactivated magnetic biochar exhibited high PMS activation to degrade TC with a high removal rate of 97.6%.