Tailoring wood waste biochar as a reusable microwave absorbent for pollutant removal: Structure-property-performance relationship and iron-carbon interaction

Simultaneous synthesis of super-paramagnetic hydrochar in a one-pot using subcritical water medium and evaluation of its photocatalytic activity

The unregulated release of chemical dyes into the environment presents considerable environmental hazards when left untreated. Photocatalytic degradation, acknowledged as an eco-friendly and cost-effective method, has garnered attention for its efficacy in eliminating organic pollutants like dye. Consequently, the development of multifunctional materials with different applications in environmental and catalytic fields emerges as a promising avenue. Recognizing the significance of integrating catalysts and porous materials for enhancing interactions between pollutants and photo-sensitive substances, magnetic hydrochar emerges as a solution offering heightened efficiency, scalability, recyclability, and broad applicability in various environmental processes, notably wastewater treatment, due to its facile separation capability. In this study, Fe3O4-based, super-paramagnetic hydrochar (SMHC) was simultaneously synthesized in a single step using a coconut shell in the subcritical water medium. A thorough analysis was conducted on both raw hydrochar (RHC) and SMHC to unravel the mechanism of interaction between Fe3O4 nanoparticles and the hydrochar matrix. The synthesized hydrochar exhibited super-paramagnetic characteristics, with a saturation magnetization of 23.7 emu/g and a magnetic hysteresis loop. SMHC displayed a BET surface area of 42.6 m2/g and an average pore size of 26.3 nm, indicating a mesoporous structure according to nitrogen adsorption-desorption isotherms. XRD analysis revealed magnetic crystal sizes in the obtained SMHC to be 13.7 nm. The photocatalytic performance of SMHC was evaluated under visible light exposure in the presence of H2O2 for Astrazon yellow (AY) dye degradation, with optimization conducted using response surface methodology (RSM). The most substantial dye removal, reaching 92.83%, was achieved with 0.4% H2O2 at a 20 mg/L dye concentration and an 80-min reaction duration.

Microwave-Assisted Pyrolysis-A New Way for the Sustainable Recycling and Upgrading of Plastic and Biomass: A Review

The efficient utilization of organic solid waste resources can help reducing the consumption of conventional fossil fuels, mitigating environmental pollution, and achieving green sustainable development. Due to its dual nature of being both a resource and a source of pollution, it is crucial to implement suitable recycling technologies throughout the recycling and upgrading processes for plastics and biomass, which are organic solid wastes with complex mixture of components. The conventional pyrolysis and hydropyrolysis were summarized for recycling plastics and biomass into high-value fuels, chemicals, and materials. To enhance reaction efficiency and improve product selectivity, microwave-assisted pyrolysis was introduced to the upgrading of plastics and biomass through efficient energy supply especially with the aid of catalysts and microwave absorbers. This review provides a detail summary of microwave-assisted pyrolysis for plastics and biomass from the technical, applied, and mechanistic perspectives. Based on the recent technological advances, the future directions for the development of microwave-assisted pyrolysis technologies are predicted.

Removal of bisphenol A in a heterogeneous Fenton system via biochar synthesized using different Fe precursors: Properties, effects, and mechanisms

The reactivity and mechanism of the Fe-doped biochar (FeBC) Fenton reaction are typically influenced by the amount and type of Fe species in materials. This study investigated the effects of different Fe precursors (FeSO4, Fe(NO)3, FeCl2, and FeCl3) used to prepare Fenton catalyst FeBCs (FeSBC, FeNBC, FeC2BC, and FeC3BC) on the physicochemical characteristics, pH resistance, and reactivity for bisphenol A (BPA) removal. In addition to the FeSBC/H2O2 (0.007 min-1) system, FeNBC/H2O2 (1.143 min-1), FeC2BC/H2O2 (0.278 min-1), and FeC3BC/H2O2 (0.556 min-1) completely removed BPA within 20 min under the optimal conditions (FeBCs: 0.1 g/L; H2O2: 1 mM; BPA: 20 mg/L; pH 3). FeBCs/H2O2 systems demonstrated good stability and resistance to inorganic anions and natural organic matter under appropriate initial pH conditions. However, FeC2BC and FeC3BC exhibited better pH applicability than FeNBC. Characterization results indicated that the physicochemical properties of FeBCs were dependent on the Fe precursor, which correlated with the degree of Fe corrosion and the production of distinct reactive oxygen species (ROS). Quenching experiments and electron spin resonance detection results indicated that OH, 1O2, and O2- species were all engaged in BPA removal; the ROS concentrations were significantly influenced by the initial pH and Fe precursor. The results indicate that Fe precursors significantly impact the performance and characteristics of Fe-based biochar materials, which are tailorable to specific applications.

Enhanced adsorption of aromatic VOCs on hydrophobic porous biochar produced via microwave rapid pyrolysis

To customize biochar suitable for efficient adsorption of benzene derivatives, this study presents programmed microwave pyrolysis to produce hydrophobic porous biochar with low-dose ferric chloride. Designated control of the ramping rates in the carbonization stage and the temperatures in the activation stage were conducive to enlarging the specific surface area. Iron species, including amorphous iron minerals, could create small-scale hotspots during microwave pyrolysis to promote microporous structure development. Compared with conventional pyrolysis, programmed microwave pyrolysis could increase the specific surface area from 288.6 m2 g-1 to 455.9 m2 g-1 with a short heating time (15 min vs. 2 h) under 650 °C. Engineered biochar exhibited higher adsorption capacity for benzene and toluene (136.6 and 94.6 mg g-1), and lower adsorption capacity for water vapour (6.2 mg g-1). These findings provide an innovative design of engineered biochar for the adsorption of volatile organic compounds in the environment.

Nanocomposite from tannery sludge-derived biochar and Zinc oxide nanoparticles for photocatalytic degradation of Bisphenol A toward dual environmental benefits

The growing concern over the presence of pollutants like Bisphenol A (BPA) in water sources has led to the growth of novel treatment technologies for its removal. This research work investigates the development of a novel biochar-metal oxide nanocomposite derived from tannery sludge and Zinc oxide (ZnO) nanoparticles for the photodegradation of BPA. The biochar was obtained by pyrolysis process, followed by impregnation of ZnO nanoparticles using a hydrothermal technique. The critical properties of as-prepared nanocomposite were evaluated by FT-IR, BET surface area, XRD, FE-SEM, HR-TEM, XPS, PL, EPR, and Raman Spectroscopy. In addition, the photocatalytic activity of nanocomposites was evaluated by measuring the degradation of BPA in visible light irradiation. The outcomes revealed that ZnO-loaded chemically activated biochar exhibited higher photocatalytic activity for the degradation of BPA than the pristine and non-chemically activated biochar. At pH 5, 0.2 g/L of photocatalyst dosage, 20 ppm of initial pollutant concentration, and 150 min of contact time, the maximum degradation efficiency of BPA was observed as 94.50 %. Also, nanocomposites showed good stability and reusability, with only a slight decrease in photocatalytic activity after multiple cycles of use. More importantly, the degradation mechanisms of BPA using as-prepared nanocomposites were analyzed in detail, indicating that the observed photocatalytic activity could be attributed to the synergistic effect between the biochar and ZnO, which provided a large surface area for the adsorption of BPA and promoted the generation of reactive oxygen species for its degradation. Overall, this study highlighted the potential of using nanocomposites from tannery sludge-derived biochar and ZnO nanoparticles for the degradation of BPA from polluted water sources using a photocatalytic process toward the dual environmental benefits.

Amoxicillin degradation in the heat, light, or heterogeneous catalyst activated persulfate systems: Comparison of kinetics, mechanisms and toxicities

Various activated persulfate (PS) technologies have been investigated and implemented to eliminate antibiotic contaminants from water. The investigation and evaluation of different activation systems are essential for the application of PS techniques. The degradation of amoxicillin (AMX) by heat, light, or heterogeneous catalyst of Fe-AC composite activated PS was investigated, and the kinetics, mechanisms and toxicities were compared in this work. The apparent activation energy of the Fe-AC system was lower than that of the heat system. Hydroxyl and sulfate radicals were demonstrated by electron paramagnetic resonance (EPR) spectroscopy and quenching tests. There were 22, 21 and 13 types of degradation intermediates detected in heat, light and Fe-AC system, respectively. Six pathways of AMX degradation were proposed and compared in the three activated PS systems. The toxicity prediction of degradation intermediates under different treatment processes was estimated by ecological structure-activity relationship model and toxicity estimation software tool. The genotoxicity of the AMX degradation solution was tested by Acinetobacter baylyi ADP1_recA, which indicated that the AMX solution after treatment in the Fe-AC system had almost no genotoxicity. The Fe-AC/PS system shows apparent advantages over the heat or light activated PS system in most cases, demonstrating that the Fe-AC/PS system is suitable for AMX-contaminated remediation in aqueous solution.

Acid-modified red mud biochar for the degradation of tetracycline: Synergistic effect of adsorption and nonradical activation

In this study, a novel acid-modified red mud biochar catalyst (MMBC) was synthesized by industrial waste red mud (RM) and peanut shell (PSL) to activate peroxodisulfate (PDS) for the degradation of TC. Meanwhile, MMBC exhibited remarkable adsorption capacity, reaching a 60% removal ratio of TC within 60 min (equilibrium adsorption capacity = 12 mg/g). After adding PDS, MMBC/PDS system achieved a 93.8% removal ratio of TC within 60 min. Quenching experiments and electron paramagnetic resonance (EPR) results showed that 1O2 played a dominant role in the degradation of TC and O2•- was the mainly precursor for the production of 1O2 in the MMBC/PDS system. X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR) analysis showed that the surface Fe(II), -OH and -COOH provided the active sites for the activation of PDS by MMBC. In addition, acid modification optimised the surface structure of the catalyst and enhanced the conversion of Fe (mainly Fe(III) to Fe(II)), thereby improving the adsorption and catalytic efficiency of MMBC. This study confirmed that modified red mud biochar is an efficient composite with both adsorption and catalysis, providing new ideas for the practical treatment of antibiotic wastewater and the resource utilization of red mud.

A new attempt to control volatile organic compounds (VOCs) pollution - Modification technology of biomass for adsorption of VOCs gas

The detrimental impact of volatile organic compounds on the surroundings is widely acknowledged, and effective solutions must be sought to mitigate their pollution. Adsorption treatment is a cost-effective, energy-saving, and flexible solution that has gained popularity. Biomass is an inexpensive, naturally porous material with exceptional adsorbent properties. This article examines current research on volatile organic compounds adsorption using biomass, including the composition of these compounds and the physical (van der Waals) and chemical mechanisms (Chemical bonding) by which porous materials adsorb them. Specifically, the strategic modification of the surface chemical functional groups and pore structure is explored to facilitate optimal adsorption, including pyrolysis, activation, heteroatom doping and other methods. It is worth noting that biomass adsorbents are emerging as a highly promising strategy for green treatment of volatile organic compounds pollution in the future. Overall, the findings signify that biomass modification represents a viable and competent approach for eliminating volatile organic compounds from the environment.

Synergetic effect of photocatalytic oxidation plus catalytic oxidation on the performance of coconut shell fiber biochar decorated α-MnO2 under visible light towards BPA degradation

Photocatalytic technology is regarded as a promising approach for fast degradation of refractory organic pollutant in water. However, the performance of the photocatalyst can be restricted by the variation of water matrix conditions. Herein, coconut shell fiber was pyrolyzed to biochar (CSB800) and incorporated with α-MnO2 to degrade bisphenol A (BPA) in water under visible light irradiation. The prepared α-MnO2/CSB800 composites demonstrated high efficacy in degrading BPA. Specifically, 0.01 mM of BPA could be completely degraded by 0.1 g/L of MnO2/CSB800 within 45 min. It was found that the incident light could effectively trigger the separation of electron and hole in α-MnO2. The electron and hole were afterwards converted to hydroxyl radical (●OH), superoxide radical (●O2-) and non-radical singlet oxygen (1O2), which subsequently initiated the photocatalytic degradation of BPA. Additionally, α-MnO2/CSB800 could simultaneously participate the oxidative degradation pathway of BPA with its high oxidation-reduction potential. The introduction of CSB800 led to higher BPA degradation efficiency since CSB800 could accelerate the charge carrier transferring rate during BPA degradation process via either pathway. The co-existence of both photocatalytic and oxidative degradation synergy enables α-MnO2/CSB800/visible light system with high catalytic performance stability towards various water matrices. This study proposes an effective strategy to prepare easy-available photocatalysts with high and stable performance towards for addressing organic pollution issues in water.

Comprehensive review on recent production trends and applications of biochar for greener environment

The suitability of biochar as a supplement for environmental restoration varies significantly based on the type of feedstocks used and the parameters of the pyrolysis process. This study comprehensively examines several aspects of biochar's potential benefits, its capacity to enhance crop yields, improve nutrient availability, support the co-composting, water restoration and enhance overall usage efficiency. The supporting mechanistic evidence for these claims is also evaluated. Additionally, the analysis identifies various gaps in research and proposes potential directions for further exploration to enhance the understanding of biochar application. As a mutually advantageous approach, the integration of biochar into agricultural contexts not only contributes to environmental restoration but also advances ecological sustainability. The in-depth review underscores the diverse suitability of biochar as a supplement for environmental restoration, contingent upon the specific feedstock sources and pyrolysis conditions used. However, concerns have been raised regarding potential impacts on human health within agricultural sectors.

Scalability of advanced oxidation processes (AOPs) in industrial applications: A review

Disinfection and decontamination of water by application of oxidisers is an essential treatment step across numerous industrial sectors including potable supply and industry waste management, however, could be greatly enhanced if operated as advanced oxidation processes (AOPs). AOPs destroy contaminants including pathogens by uniquely harnessing radical chemistry. Despite AOPs offer great practical opportunities, no reviews to date have highlighted the critical AOP virtues that facilitate AOPs' scale up under growing industrial demand. Hence, this review analyses the critical AOP parameters such as oxidant conversion efficiency, batch mode vs continuous-flow systems, location of radical production, radical delivery by advanced micro-/mesoporous structures and AOP process costs to assist the translation of progressing developments of AOPs into their large-scale applications. Additionally, the state of the art is analysed for various AOP inducing radical/oxidiser measurement techniques and their half-lives with a view to identify radicals/oxidisers that are suitable for in-situ production. It is concluded that radicals with short half-lives such as hydroxyl (10-4 μsec) and sulfate (30-40 μsec) need to be produced in-situ via continuous-flow reactors for their effective transport and dosing. Meanwhile, radicals/oxidisers with longer half-lives such as ozone (7-10 min), hydrogen peroxide (stable for several hours), and hypochlorous acid (10 min -17 h) need to be applied through batch reactor systems due to their relatively longer stability during transportation and dosing. Complex and costly synthesis as well as cytotoxicity of many micro-/mesoporous structures limit their use in scaling up AOPs, particularly to immobilising and delivering the short-lived hydroxyl and sulfate radicals to their point of applications. Overall, radical delivery using safe and advanced biocompatible micro-/mesoporous structures, radical conversion efficiency using advanced reactor design and portability of AOPs are priority areas of development for scaling up to industry.

Commonly Neglected Ester Groups Enhanced Microwave Absorption

Oxygen-containing functional groups have high potential to excite polarization loss. The nature and mechanism of the polarization loss brought on by oxygen-containing functional groups, however, remain unclear. In this study, metal-organic framework precursors are in situ pyrolyzed to produce ultrathin carbon nanosheets (UCS) that are abundant in oxygen functional groups. By altering the pyrolysis temperature, the type and concentration of functional groups are altered to produce good microwave absorption capabilities. It is demonstrated that the main processes of electromagnetic loss are polarization caused by "field effects and induced effects" brought on by strongly polar ester functional groups. Moreover, links between various oxygen functional groups and structural flaws are established, and their respective contributions to polarization are sharply separated. The sample with the highest ester group content ultimately achieves an effective absorption bandwidth of 6.47 GHz at a pyrolysis temperature of 800°C. This research fills a theoretical hole in the frequently overlooked polarization mechanism in the microwave band by defining the key polarization parameters in chaotic multiple dipole systems and, in particular, redefining the significance of ester groups.

The origins of potentially superior properties and multifunctionalities of carbon-nano zero-valent iron in the carbonization pyrolysis process

Although carbon-nano zero-valent iron (C@nZVI) composites with unique properties have been used for environmental remediation, the origins of their superior properties and multifunctionalities of C@nZVI still need to be verified. Here, iron precursor nanoparticles (PML-Fe NPs) synthesized by Pinus massoniana Lamb and carbonized C@nZVI were systemically compared to reveal the origins of the structure and performance of C@nZVI composites. Characterizations showed that structure-modulated C@nZVI has favorable properties of good crystallinity, graphite carbon-rich structure but also defects when compared to PML-Fe NPs. The resultant carbon layer fundamentally improved its dispersion and anti-oxidation properties. Further experiments demonstrated that the evolution of material crystallinity, graphitization and defects affected the reaction pathway of hexavalent chromium (Cr(VI)), oxytetracycline hydrochloride (OTC), and 17β-estradiol (βE2). The multifunctionalities covered adsorption, reduction and catalytic oxidation. This study explains the origins of multifunctional C@nZVI by understanding the structure-property correlation in the carbonization process.

Regulation of tourmaline-mediated Fenton-like system by biochar: Free radical pathway to non-free radical pathway

The heterogeneous Fenton-like systems induced by Fe-containing minerals have been largely applied for the degradation of organic pollutants. However, few studies have been conducted on biochar (BC) as an additive to Fenton-like systems mediated by iron-containing minerals. In this study, the addition of BC prepared at different temperatures was found to significantly enhance the degradation of contaminants in the tourmaline-mediated Fenton-like system (TM/H2O2) using Rhodamine B (RhB) as the target contaminant. Furthermore, the hydrochloric acid-modified BC prepared at 700 °C (BC700(HCl)) could achieve complete degradation of high concentrations of RhB in the BC700(HCl)/TM/H2O2 system. Free radical quenching experiments showed that TM/H2O2 system removed contaminants mainly mediated by the free radical pathway. After adding BC, the removal of contaminants is mainly mediated by the non-free radical pathway in BC700(HCl)/TM/H2O2 system which was confirmed by the Electron paramagnetic resonance (EPR) experiments and electrochemical impedance spectroscopy (EIS). In addition, BC700(HCl) had broad feasibility in the degradation of other organic pollutants (Methylene Blue (MB) 100%, Methyl Orange (MO) 100%, and tetracycline (TC) 91.47%) in the tourmaline-mediated Fenton-like system. Possible pathways for the degradation of RhB by the BC700(HCl)/TM/H2O2 system were also proposed.

Wood induced preparation of Fe3C decorated biochar for peroxymonosulfate activation towards bisphenol a degradation with low ion leaching

Heterogeneous iron/persulfate system suffers from the problems of high ion leaching, severe catalyst surface corrosion and low performance stability. Herein, a series of iron compound incorporated N doped biochar composite catalysts were prepared from pyrolyzing wood powder and ferric ferrocyanide mixture, which were used for bisphenol A (BPA) degradation in water through peroxymonosulfate (PMS) activation. It was found that the reducing gases released from wood powder at different pyrolysis temperature significantly affected the crystalline phase of the iron compound in the catalyst, in which pure phase iron carbide (Fe₃C) decorated N doped biochar was obtained at pyrolysis temperature of 600 °C or higher. Wood powder was introduced as both Fe₃C formation inductive agent and biochar precursor. Fe₃C/biochar exhibited optimal BPA degradation performance, in which 0.5 g/L of catalyst could completely degrade 0.05 mM BPA within 30 min. Radical, high valent iron-oxo, and non-radical species were all generated in the reaction system by both Fe₃C and N doped biochar, respectively. Moreover, the multi-valence nature of Fe in Fe₃C enabled the reaction system with remarkably reduced Fe ion leaching and negligible iron sludge production since Fe₃C could activate PMS through a heterogeneous mechanism. Having multiple active species generated for BPA degradation, the prepared catalyst also showed promising adaptability and recyclability. This study can provide a new solution for the design of iron based catalyst/PMS system for organic pollutant degradations with low ion release.

Heterogeneous Fenton system driven by iron-loaded sludge biochar for sulfamethoxazole-containing wastewater treatment

In this study, the treatment performance of a heterogeneous Fenton system (Fe-BC + H₂O₂) driven by iron-loaded sludge biochar (Fe-BC) on wastewater containing sulfamethoxazole (SMX) was investigated using the CODcr removal efficiency (φ) as an indicator. The batch experimental results showed that the optimal operating conditions were as follow: initial pH 3, H₂O₂ concentration 20 mmol L^-1, Fe-BC dose 1.2 g L^-1, temperature 298 K. The corresponding φ was as high as 83.43%. The removal of CODcr was better described by BMG model and revised BMG (BMGL) model. According to the BMGL model, the φ_max could be 98.37% (298 K). Moreover, the removal of CODcr was a diffusion-controlled process, while liquid film diffusion and intraparticle diffusion together determined its removal rate. The removal of CODcr should be a synergistic effect of adsorption and Fenton oxidation (real heterogeneous Fenton and homogeneous Fenton) and other pathways. Their contributions were 42.79%, 54.01% and 3.20%, respectively. For homogeneous Fenton, there seemed to be two simultaneous SMX degradation pathways: SMX→4-(pyrrolidine-11-sulfonyl)-aniline→N-(4-aminobenzenesulfonyl) acetamide/4-amino-N-ethyl benzene sulfonamides→4-amino-N-hydroxy benzene sulfonamides; SMX→N-ethyl-3-amino benzene sulfonamides→4-methanesulfonylaniline. In summary, Fe-BC had potential for practical application as a heterogeneous Fenton catalyst.

Insights into the mechanism of persulfate activation with biochar composite loaded with Fe for 2,4-dinitrotoluene degradation

Iron in biochar composite loaded with Fe (Fex@biochar) is crucial for persulfate activation. However, the iron dosages-driven mechanism linked to the speciation, electrochemical property, and persulfate activation with Fex@biochar remains ambiguous. We synthesized and characterized a series of Fex@biochar and evaluated its catalytic performance in 2,4-dinitrotoluene removal experiments. With increasing FeCl₃ dosage, iron speciation in Fex@biochar changed from γ-Fe₂O₃ to Fe₃O₄, and the variation in functional groups was as follows: Fe-O, aliphatic C-O-H, O-H, aliphatic C-H, aromatic CC or CO, and C-N. The electron accepting capacity of Fex@biochar increased as the FeCl₃ dosage increased from 10 to 100 mM but decreased at 300 and 500 mM FeCl₃. 2,4-dinitrotoluene removal first increased and subsequently decreased, reaching 100% in the persulfate/Fe100@biochar system. The Fe100@biochar also showed good stability and reusability for PS activation, verified by five test cycles. The mechanism analysis indicated that the iron dosage altered the Fe (Ⅲ) content and electron accepting capacity of Fex@biochar during pyrolysis, further controlling persulfate activation and 2,4-dinitrotoluene removal. These results support the preparation of eco-friendly Fex@biochar catalysts.

Insight into n-CaO2/SBC/Fe(II) Fenton-like system for glyphosate degradation: pH change, iron conversion, and mechanism

Glyphosate has significant adverse effects on creature and ecological balance. Therefore, the efficient treatment of glyphosate wastewater is of great significance. In this study, nano calcium peroxide (n-CaO₂) was loaded onto activated sludge biochar (SBC), and then Fe(II) was added to construct a Fenton-like system (n-CaO₂/SBC/Fe(II)). SBC played the role of both a dispersant and catalyst, which greatly improved the removal capability of glyphosate. The removal efficiency of glyphosate in the n-CaO₂/SBC/Fe(II) system was as high as 99.6%. The persistent free radicals (PFRs) on SBC can promote the conversion of Fe(III) to Fe(II) in the reaction system, and Fe(II) can be maintained at about 15 mg L^-1 until the reaction reached equilibrium. Due to the synergistic effect of Fe(II) hydrolysis and SBC catalysis, n-CaO₂/SBC/Fe(II) system can effectively remove glyphosate in a wide initial pH range (4.0-10.0), and the pH of the reaction system can be remained in a suitable environment (4.0-6.0) for Fenton-like reaction. Advanced oxidation and chemical precipitation were the main mechanisms for the removal of glyphosate. Most of glyphosate could be oxidized into H₂PO^-₄ anions by breaking the bonds of C-P and C-N, and the H₂PO^-₄ can be further adsorbed and bounded on the surface of the composites. This system overcomes the shortcomings of pH rising and Fe(III) precipitation in the CaO₂-based oxidation systems, and realizes the efficient and complete degradation for glyphosate.

Combined hydrothermal and biological treatments for valorization of fruit and vegetable waste into liquid organic fertilizer

This study investigated the effects of hydrothermal treatment, biological treatment and their combination on nutrients recovery from fruit and vegetable waste (FVW) and evaluated the feasibility of fruit and vegetable waste juice (FVWJ) from the combined treatment as liquid organic fertilizer. In this study, following conditions were determined suitable for FVW treatment: the temperature of 165 °C and retention time of 45 min for hydrothermal treatment, 20 h for biological treatment, and Weissella, as the dominant microbial genus present in FVW, was suggested as inoculum for biological treatment. In the combined treatment, based on the above conditions of hydrothermal and biological treatments, the yield of FVWJ was 93.03 g out of 100 g FVW, and concentrations of organic matter (1.45%, w/w), primary nutrients (0.51%, w/w), and toxic components in the FVWJ complied with the requirements for use concentration in both Chinese and European standards for liquid organic fertilizer. The economic analysis showed the net saving of 13.60 USD per ton FVW, indicating that it is an economical approach to valorize fruit and vegetable waste into liquid organic fertilizer through the combined treatment.

Efficient microwave-assisted mineralization of oxytetracycline driven by persulfate and hypochlorite over Cu-biochar catalyst

Microwave (MW)-assisted catalytic degradation of organic pollutants draws increasing attention owing to its high efficiency in wastewater treatment. This work developed Cu-loaded biochar (CuBC) catalysts for time-efficient mineralization of refractory and high-concentration oxytetracycline (OTC). With only 1 min at 80 °C, Na₂S₂O₈ achieved 100% total organic carbon (TOC) removal over the Cu5BC, while NaClO mineralized 73.3% TOC over the metal-free BC, in contrast to a relatively low mineralization efficiency (< 35%) achieved by H₂O₂. The high efficiency in MW-assisted oxidation systems could be ascribed to reactive oxidizing species (^•SO₄^- or ^•ClO), which otherwise were barely detectable in a conventional heating system. The interactions between CuBC and MW were revealed by correlating the physiochemical characteristics to the MW absorption ability. The proposed catalytic systems can contribute to the development of a high-throughput and low-carbon wastewater treatment technology.

Chrome shaving-derived biochar as efficient persulfate activator: Ti-induced charge distribution modulation for 1O2 dominated nonradical process

Efficient degradation of organic contaminants by oxidative radicals remains a challenge due to invalid consumption of radicals and easy generation of secondary halogenated pollutants. In this work, an efficient and recyclable bimetallic biochar (Cr-Ti/BC) was developed through peroxydisulfate (PDS) activation via nonradical pathway for sulfamethoxazole (SMX) degradation. The Cr-Ti/BC exhibited excellent catalytic activity for 99.9 % of SMX removal with a high k_obs of 0.13 min^-1, and negligible inhibitory effects were observed under various pH condition. The activation mechanisms were (i) metastable reactive intermediates (Cr-Ti/BC-PDS) formation via an interaction between Cr-Ti/BC and PDS on the active defective sites (e.g., OH/COC, COOH, CO, nitric oxides, graphitic N, and pyridinic N), and (ii) ¹O₂ generation through electron transfer between Cr-Ti/BC-PDS intermediates and dissolved oxygen. The high reusability and strong stability of Cr-Ti/BC also verified the outstanding advantage of the Cr-Ti/BC during practical application. This study not only is the first study the catalytic performance of Cr and Ti co-doped biochar for PDS activation, but also successfully provides a promising strategy to induce a nonradical pathway for PDS activation, which is of great significance for the subsequent method design, and thus paving the path for exploiting advanced oxidation systems in practical application for organic contaminant removal toward polluted site remediation.

Morphology regulation of zero-valent iron nanosheets supported on microsilica for promoting peroxymonosulfate activation

Combing the assisted dispersion strategy of support with the wet chemical reduction method, a novel nano-zero valent iron/microsilica (nZVI/M) composite was successfully fabricated, where the 2D nZVI nanosheets were uniformly anchored and covered on the surface of microsilica. The introduction of microsilica notably relieved the agglomeration effect of nZVI nanosheets, which induced the improvement of specific surface area (45.68 m²/g) and pore volume (0.172 cm³/g), and thereby exposing more active sites for bisphenol A (BPA) removal. The optimized nZVI/M-0.6 displayed the superior catalytic performance in the presence of peroxymonosulfate (PMS) with the degradation rate of BPA reached above 97% within 3 min and a higher constant rate of 0.659 min^-1, which was approximately 3.9 times as high as that of nZVI/PMS system. The homogeneously dispersion of nZVI nanosheets on microsilica benefited for the assembly of the pollutants and boosting the kinetics of the catalytic degradation process. As a highly efficient PMS activator, it could well maintain the catalytic activity in different real water samples. The quenching experiments verified that SO₄^•- played the dominate role for BPA removal. This work offered novel insights for designing and preparing iron-based persulfate activator for wastewater treatment.

Coupling iron-carbon micro-electrolysis with persulfate advanced oxidation for hydraulic fracturing return fluid treatment

Improving the sustainability of the hydraulic fracturing water cycle of unconventional oil and gas development needs an advanced water treatment that can efferently treat flowback and produced water (FPW). In this study, we developed a robust two-stage process that combines flocculation, and iron-carbon micro-electrolysis plus sodium persulfate (ICEPS) advanced oxidation to treat field-based FPW from the Sulige tight gas field, China. Influencing factors and optimal conditions of the flocculation-ICEPS process were investigated. The flocculation-ICEPS system at optimal conditions sufficiently removed the total organic contents (95.71%), suspended solids (92.4%), and chroma (97.5%), but the reaction stoichiometric efficiency (RSE) value was generally less than 5%. The particles and chroma were effectively removed by flocculation, and the organic contents was mainly removed by the ICEPS system. Fourier-transform infrared spectroscopy (FTIR) analysis was performed to track the changes in FPW chemical compositions through the oxidation of the ICEPS process. Multiple analyses demonstrated that PS was involved in the activation of Fe oxides and hydroxides accreted on the surface of the ICE system for FPW treatment, which led to increasing organics removal rate of the ICEPS system compared to the conventional ICE system. Our study suggests that the flocculation-ICEPS system is a promising FPW treatment process, which provides technical and mechanistic foundations for further field application.