Electrochemical impedance spectroscopy for study of aptamer-thrombin interfacial interactions

Measurement of Neuropeptide Y in Aptamer-Modified Planar Electrodes

Electrochemical impedance spectroscopy (EIS) is a powerful technique for studying the interaction at electrode/solution interfaces. The adoption of EIS for obtaining analytical signals in biosensors based on aptamers is gaining popularity because of its advantageous characteristics for molecular recognition. Neuropeptide Y (NPY), the most abundant neuropeptide in the body, plays a crucial role with its stress-relieving properties. Quantitative measurement of NPY is imperative for understanding its role in these and other biological processes. Although aptamer-modified electrodes for NPY detection using EIS present a promising alternative, the correlation between the data obtained and the adsorption process on the electrodes is not fully understood. Various studies utilize the change in charge transfer resistance when employing an active redox label. In contrast, label-free measurement relies on changes in capacitance. To address these challenges, we focused on the interaction between aptamer-modified planar electrodes and their target, NPY. We proposed utilizing -ω*Zimag as the analytical signal, which facilitated the analysis of the adsorption process using an analogous Langmuir isotherm equation. This approach differs from implantable microelectrodes, which adhere to the Freundlich adsorption isotherm. Notably, our method obviates the need for a redox label and enables the detection of NPY at concentrations as low as 20 pg/mL. This methodology demonstrated exceptional selectivity, exhibiting a signal difference of over 20-to-1 against potential interfering molecules.

A Ratiometric Fluorescent Sensor for Penicillin G Based on Color-Tunable Gold-Silver Nanoclusters

Excessive administration of penicillin G and improper disposal of its residues pose a serious risk to human health; therefore, the development of convenient methods for monitoring penicillin G levels in products is essential. Herein, novel gold-silver nanoclusters (AuAgNCs) were synthesized using chicken egg white and 6-aza-2-thiothymine as dual ligands with strong yellow fluorescence at 509 and 689 nm for the highly selective detection of penicillin G. The AuAgNCs were characterized using transmission electron microscopy, X-ray photoelectron spectroscopy, ultraviolet-visible absorption spectrophotometry, and fluorescence spectrophotometry. Under optimum conditions, the fluorescence intensity decreased linearly with the concentration of penicillin G from 0.2 to 6 μM, with a low detection limit of 18 nM. Real sample analyses indicated that a sensor developed using the AuAgNCs could detect penicillin G in urine and water samples within 10 min, with the recoveries ranging from 99.7 to 104.0%. The particle size of the AuAgNCs increased from 1.80 to 9.06 nm in the presence of penicillin G. We believe the aggregation-induced quenching of the fluorescence of the AuAgNCs was the main mechanism for the detection of penicillin G. These results demonstrate the ability of our sensor for monitoring penicillin G levels in environmental and clinic samples.

A capacitive laser-induced graphene based aptasensor for SARS-CoV-2 detection in human saliva

SARS-CoV-2 virus induced CoVID-19 pandemic has accelerated the development of diagnostic tools. Devices integrated with electrochemical biosensors may be an interesting alternative to respond to the high demand for testing, particularly in contexts where access to standard detection technologies is lacking. Aptamers as recognition elements are useful due to their stability, specificity, and sensitivity to binding target molecules. We have developed a non-invasive electrochemical aptamer-based biosensor targeting SARS-CoV-2 in human saliva. The aptamer is expected to detect the Spike protein of SARS-CoV-2 wildtype and its variants. Laser-induced graphene (LIG) electrodes coated with platinum nanoparticles were biofunctionalized with a biotin-tagged aptamer. Electrochemical Impedance Spectroscopy (EIS) for BA.1 sensing was conducted in sodium chloride/sodium bicarbonate solution supplemented with pooled saliva. To estimate sensing performance, the aptasensor was tested with contrived samples of UV-attenuated virions from 10 to 10,000 copies/ml. Selectivity was assessed by exposing the aptasensor to non-targeted viruses (hCoV-OC43, Influenza A, and RSV-A). EIS data outputs were further used to select a suitable response variable and cutoff frequency. Capacitance increases in response to the gradual loading of the attenuated BA.1. The aptasensor was sensitive and specific for BA.1 at a lower viral load (10-100 copies/ml) and was capable of discriminating between negative and positive contrived samples (with strain specificity against other viruses: OC43, Influenza A, and RSV-A). The aptasensor detected SARS-CoV-2 with an estimated LOD of 1790 copies/ml in contrived samples. In human clinical samples, the aptasensor presents an accuracy of 72%, with 75% of positive percent of agreement and 67% of negative percent of agreement. Our results show that the aptasensor is a promising candidate to detect SARS-CoV-2 during early stages of infection when virion concentrations are low, which may be useful for preventing the asymptomatic spread of CoVID-19.

An ultrasensitive and disposable electrochemical aptasensor for prostate-specific antigen (PSA) detection in real serum samples

In this study, we constructed a disposable indium tin oxide polyethylene terephthalate film (ITO-PET)-based electrochemical aptasensor for analyzing prostate-specific antigen (PSA), one of the most important biomarkers of prostate cancer. Because of their clinical importance, building PSA biosensing systems with high sensitivity and stability is essential. However, it still presents significant difficulties, such as low detection limits. We designed a platform to covalently bind the amino-terminated aptamer by modifying the ITO-PET surface with carboxyethylsilanetriol (CTES) to obtain a self-assembled monolayer (SAM). We also evaluated the potential for use in real human serum samples by investigating the optimal operating conditions and analytical performance characteristics of the developed biosensor. The design we present here exhibits excellent precision, with a limit of detection (LOD) as low as 8.74 fg/mL PSA. The broad linear detection range of the biosensor under optimal conditions was determined as 1.0-1500 fg/mL. The dissociation constant (K_d) for the aptamer was also calculated as 46.28 ± 5.63 nM by evaluating the impedimetric response as a function of PSA concentration. The aptasensor displayed considerable repeatability (1.3% RSD) and reproducibility (7.51% RSD) and good storage stability (98.34% of the initial activity for 8 weeks). Additionally, we demonstrated that the technique we developed was quite efficient in estimating the kinetics of aptamer-analyte interactions by determining the K_d and single-frequency impedance (SFI) data. In conclusion, we proposed a selective and sensitive biosensor with the potential for clinical application and superior performance in real serum samples.

Detection of Alpha-Fetoprotein Using Aptamer-Based Sensors

Alpha-fetoprotein (AFP) is widely-known as the most commonly used protein biomarker for liver cancer diagnosis at the early stage. Therefore, developing the highly sensitive and reliable method of AFP detection is of essential demand for practical applications. Herein, two types of aptamer-based AFP detection methods, i.e., optical and electrochemical biosensors, are reviewed in detail. The optical biosensors include Raman spectroscopy, dual-polarization interferometry, resonance light-scattering, fluorescence, and chemiluminescence. The electrochemical biosensors include cyclic voltammetry, electrochemical impedance spectroscopy, and giant magnetic impedance. Looking into the future, methods for AFP detection that are high sensitivity, long-term stability, low cost, and operation convenience will continue to be developed.

Probing polymer brushes with electrochemical impedance spectroscopy: a mini review

Polymer brushes are frequently used as surface-tethered antifouling layers in biosensors to improve sensor surface-analyte recognition in the presence of abundant non-target molecules in complex biological samples by suppressing nonspecific interactions. However, because brushes are complex systems highly responsive to changes in their surrounding environment, studying their properties remains a challenge. Electrochemical impedance spectroscopy (EIS) is an emerging method in this context. In this mini review, we aim to elucidate the potential of EIS for investigating the physicochemical properties and structural aspects of polymer brushes. The application of EIS in brush-based biosensors is also discussed. Most common principles employed in these biosensors are presented, as well as interpretation of EIS data obtained in such setups. Overall, we demonstrate that the EIS-polymer brush pairing has a considerable potential for providing new insights into brush functionalities and designing highly sensitive and specific biosensors.

Interfacing aptamers, nanoparticles and graphene in a hierarchical structure for highly selective detection of biomolecules in OECT devices

In several biomedical applications, the detection of biomarkers demands high sensitivity, selectivity and easy-to-use devices. Organic electrochemical transistors (OECTs) represent a promising class of devices combining a minimal invasiveness and good signal transduction. However, OECTs lack of intrinsic selectivity that should be implemented by specific approaches to make them well suitable for biomedical applications. Here, we report on a biosensor in which selectivity and a high sensitivity are achieved by interfacing, in an OECT architecture, a novel gate electrode based on aptamers, Au nanoparticles and graphene hierarchically organized to optimize the final response. The fabricated biosensor performs state of the art limit of detection monitoring biomolecules, such as thrombin-with a limit of detection in the picomolar range (≤ 5 pM) and a very good selectivity even in presence of supraphysiological concentrations of Bovine Serum Albumin (BSA-1mM). These accomplishments are the final result of the gate hierarchic structure that reduces sterich indrance that could contrast the recognition events and minimizes false positive, because of the low affinity of graphene towards the physiological environment. Since our approach can be easily applied to a large variety of different biomarkers, we envisage a relevant potential for a large series of different biomedical applications.

Measurement of Neuropeptide Y Using Aptamer-Modified Microelectrodes by Electrochemical Impedance Spectroscopy

Aptamer-modified microelectrodes for Neuropeptide Y measurement by electrochemical impedance spectroscopy was described here. The advantages of using carbon fiber or platinum microelectrodes are because they are promising materials with high electrical conductivity, chemical stability, and high surface area that can be easily modified on their surface. The immobilization and biofouling were studied and compared using EIS. Moreover, the adsorption of NPY to the aptamer-modified microelectrodes was also demonstrated by EIS. Changes of -ω*Zimag, an impedance factor that gives information of the capacitance, is directly correlated with concentrations. A widely linear range was obtained from 10 to 1000 ng/mL of NPY. This method was able to detect NPY without performing a redox reaction by adsorption at the surface of the microelectrodes, with the specificity provided by aptamer functionalization of the microelectrode surface.

Stimuli-Responsive Templated Polymer as a Target Receptor for a Conformation-based Electrochemical Sensing Platform

The use of highly crosslinked molecularly imprinted polymers as a synthetic target receptor has the limitations of restricted accessibility to the binding sites resulting in slow response time. Moreover, such artificial receptors often require additional transduction mechanisms to translate target binding events into measurable signals. Here, we propose the development of a single-chain stimuli-responsive templated polymer, without using any covalent interchain crosslinkers, as a target recognition element. The synthesized polymer chain exhibits preferential binding with the target molecule with which the polymer is templated. Moreover, upon specific target recognition, the polymer undergoes conformation change induced by its particular stimuli responsiveness, namely the target binding event. Such templated single-chain polymers can be attached to the electrode surface to implement a label-free electrochemical sensing platform. A target analyte, 4-nitrophenol (4-NP), was used as a template to synthesize a poly-N-isopropylacrylamide (PNIPAM)-based copolymer chain which was anchored to the electrode to be used as a selective receptor for 4-NP. The electrode surface chemistry analysis and the electrochemical impedance study reveal that the polymer concentration, the interchain interactions, and the Hofmeister effect play a major role in influencing the rate of polymer grafting as well as the morphology of the polymers grafted to the electrode. We also show that the specific binding between 4-NP and the copolymer results in a substantial change in the charge transfer kinetics at the electrode signifying the polymer conformation change.

Ultra-sensitive and selective electrochemical biosensor with aptamer recognition surface based on polymer quantum dots and C60/MWCNTs- polyethylenimine nanocomposites for analysis of thrombin protein

In this study, an ultra-sensitive and selective Thrombin biosensor with aptamer-recognition surface is introduced based on carbon nanocomposite. To prepare the this biosensor, screen-printed carbon electrodes (SPCE) were modified with a nanocomposite made from fullerene (C₆₀), multi-walled carbon nanotubes (MWCNTs), polyethylenimine (PEI) and polymer quantum dots (PQdot). The unique characteristics of each component of the C₆₀/MWCNTs-PEI/PQdot nanocomposite allow for synergy between nanoparticles while polymer quantum dots resulted in characteristics such as high stability, high surface to volume ratio, high electrical conductivity, high biocompatibility, and high mechanical and chemical stability. The large number of amine groups in C₆₀/MWCNTs-PEI/PQdot nanocomposite created more sites for better covalent immobilization of amino-linked aptamer (APT) which improved the sensitivity and stability of the aptasensor. Differential Pulse Voltammetry (DPV) method with probe solution was used as the measurment method. Binding of thrombin protein to aptamers immobilized on the transducer resulted in reduced electron transfer at the electrode/electrolyte interface which reduces the peak current (I_P) in DPV. The calibration curve was drawn using the changes in the peak current (ΔI_P),. The proposed aptasensor has a very low detection limit of 6 fmol L^-1, and a large linear range of 50 fmol L^-1 to 20 nmol L^-1. Furthermore, the proposed C₆₀/MWCNTs-PEI/PQdot/APT aptasensor has good reproducibility, great selectivity, low response time and a good stability during its storage. Finally, the application of the proposed aptasensor for measuring thrombin on human blood serum samples was investigated. This aptasensor can be useful in bioengineering and biomedicine applications as well as for clinical studies.

An integrated microfluidic platform for selective and real-time detection of thrombin biomarkers using a graphene FET

Lab-on-a-chip technology offers an ideal platform for low-cost, reliable, and easy-to-use diagnostics of key biomarkers needed for early screening of diseases and other health concerns. In this work, a graphene field-effect transistor (GFET) functionalized with target-binding aptamers is used as a biosensor for the detection of thrombin protein biomarker. Furthermore, this GFET is integrated with a microfluidic device for enhanced sensing performances in terms of detection limit, sensitivity, and continuous monitoring. Under this platform, a picomolar limit of detection was achieved for measuring thrombin; in our experiment measured as low as 2.6 pM. FTIR, Raman and UV-Vis spectroscopy measurements were performed to confirm the device functionalization steps. Based on the concentration-dependent calibration curve, a dissociation constant of KD = 375.8 pM was obtained. Continuous real-time measurements were also conducted under a constant gate voltage (VGS) to observe the transient response of the sensor when analyte was introduced to the device. The target selectivity of the sensor platform was evaluated and confirmed by challenging the GFET biosensor with various concentrations of lysozyme protein. The results suggest that this device technology has the potential to be used as a general diagnostic platform for measuring clinically relevant biomarkers for point-of-care applications.

Facile and Label-Free Electrochemical Biosensors for MicroRNA Detection Based on DNA Origami Nanostructures

MicroRNAs (miRNAs) have emerged as the promising molecular biomarkers for early diagnosis and enhanced understanding of the molecular pathogenesis of cancers as well as certain diseases. Here, a facile, label-free, and amplification-free electrochemical biosensor was developed to detect miRNA by using DNA origami nanostructure-supported DNA probes, with methylene blue (MB) serving as the hybridization redox indicator, for the first time. Specifically, the use of cross-shaped DNA origami nanostructures containing multiple single-stranded DNA probes at preselected locations on each DNA nanostructure could increase the accessibility and the recognition efficiency of the probes (due to the rational controlled density of DNA probes). The successful immobilization of DNA origami probes and their hybridization with targeted miRNA-21 molecules was confirmed by electrochemical impedance spectroscopy and cyclic voltammetry methods. A differential pulse voltammetry technique was employed to record the oxidation peak current of MB before and after target hybridization. The linear detection range of this biosensor was from 0.1 pM to 10.0 nM, with a lower detection limit of 79.8 fM. The selectivity of the miRNA biosensor was also studied by observing the discrimination ability of single-base mismatched sequences. Because of the larger surface area and unprecedented customizability of DNA origami nanostructures, this strategy demonstrated great potential for sensitive, selective, and label-free determination of miRNA for translational biomedical research and clinical applications.

Hydrogel based aptasensor for thrombin sensing by Resonance Rayleigh Scattering

In this research, a novel Resonance Rayleigh Scattering (RRS) aptasensor was developed for thrombin monitoring using in-situ synthesized and embedded Au nanoparticles (AuNPs) into poly vinyl alcohol -borax hydrogel (PBH). Thiolated-thrombin binding aptamer (thiolated-TBA) was attached to the surface of AuNPs embedded into PBH to design the PBH-aptasensor for thrombin detection (thiolated-TBA@AuNPs-PBH). To verify the characteristic and morphology of PBH nanocomposite, energy dispersive X-ray analysis, TEM, average particle size analizer and UV-Vis spectra were performed. The difference in RRS intensities in the absence and presence of thrombin was calculated and selected as the monitoring signal. Effect of different parameters on the RRS signal was investigated at excitation wavelength of 500 nm. Under the approved conditions, the linear detection range was validated over the concentration of 0.70 pM- 0.02 μM. The limit of detection based on 3S_b was 0.10 pM. The relative standard deviation for 5.6 pM and 3.6 nM were 4.0 and 2.7% (n = 10), respectively. The proposed aptasensor was successfully applied as an experimental model for thrombin detection in serum samples of healthy volunteers with acceptable results.

Computational analysis and optimization of carcinoembryonic antigen aptamers and experimental evaluation

Carcinoembryonic antigen (CEA), a highly glycosylated protein, overexpresses in many cancers. In this study, computational methods were used to optimize CEA aptamers. Experimental evaluvation of selected aptamers were conducted through electrochemical impedance spectroscopy. After two and three-dimensional structure modeling, the complexes of twelve reported aptamers against CEA were simulated using the ZDOCK server. Based on docking scores, two aptamer sequences (CSR59 and CSR57.1) were selected and used to create a new library. This ssDNA aptamer library consisting of 91 sequences was created using diverse in silico mutational methods. We obtained seventeen sequences having higher binding scores than reported sequences. Based on ZDOCK scores, the interaction domain of CEA, and steric hindrance due to glycosylation, two aptamer sequences (G3S1.5 and G2S2.2) were selected. An impedimetric aptasensor was designed, and selected aptamers were used as biorecognition elements. Resistance to charge transfer (Rct) quantities confirmed the bioinformatic approach and molecular docking scores. The result showed that the interaction ability of selected aptamers was about 13.5 fold higher than the control. It can be concluded that the selected aptamers have good potential for detection of carcinoembryonic antigen biomarker.

Label free thrombin detection in presence of high concentration of albumin using an aptamer-functionalized nanoporous membrane

Nanoporous alumina membranes have become a ubiquitous biosensing platform for a variety of applications and aptamers are being increasingly utilized as recognition elements in protein sensing devices. Combining the advantages of the two, we report label-free sensitive detection of human α-thrombin by an aptamer-functionalized nanoporous alumina membrane using a four-electrode electrochemical cell. The sensor response to α-thrombin was determined in the presence of a high concentration (500 μM) of human serum albumin (HSA) as an interfering protein in the background. The sensor sensitivity was also characterized against γ-thrombin, which is a modified α-thrombin lacking the aptamer binding epitope. The detection limit, within an appreciable signal/noise ratio, was 10 pM of α-thrombin in presence of 500 μM HSA. The proposed scheme involves the use of minimum reagents/sample preparation steps, has appreciable response in presence of high concentrations of interfering molecules and is readily amenable to miniaturization by association with existing-chip based electrical systems for application in point-of-care diagnostic devices.

Electrochemical detection of plant virus using gold nanoparticle-modified electrodes

Tristeza is one of the destructive diseases of citrus causing by citrus tristeza virus (CTV). Historically, CTV has been associated with serious outbreaks of quick decline of citrus, therefore CTV monitoring is important aspect for avoiding such re-emerging epidemics, which would threat citrus production through the world. In this context, we have designed for the first time a label-free impedimetric biosensor for the detection of nucleic acid of CTV. The sensing platform based on a screen-printed carbon electrode (SPCE) was modified by electrodeposited gold nanoparticles (AuNPs), which allowed to efficiently immobilizing thiolated ssDNA probes as well to enhance the electrode conductivity. The growth of AuNPs was optimized and characterized using scanning electron microscopy (SEM), cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). We investigated the behavior of thiolated ssDNA probe layer and its hybridization with target DNA onto AuNP surfaces by EIS measurements in Fe(CN₆)^4-/Fe(CN₆)^3- red-ox system. The main sensor design aspects such as AuNPs size, probe DNA concentration and immobilization time together with DNA hybridization time were optimized so as to achieve the best performance. Impedance values of DNA hybridization increased with Citrus tristeza-related synthetic DNA concentration, showing a logarithmic relation in the range of 0.1-10 μM. The results also indicate that the biosensor was able to selectively detect CTV nucleic acids in the presence of other non-specific DNAs. Moreover, we have demonstrated the good performance of the system in a real plant sample matrix. In addition, the sensor reproducibility enhanced after the hybridization onto MCH/poly (AT) thiolated DNA probes which was confirmed by intra- and inter-day variability assays.

Electrochemical and AFM Characterization of G-Quadruplex Electrochemical Biosensors and Applications

Guanine-rich DNA sequences are able to form G-quadruplexes, being involved in important biological processes and representing smart self-assembling nanomaterials that are increasingly used in DNA nanotechnology and biosensor technology. G-quadruplex electrochemical biosensors have received particular attention, since the electrochemical response is particularly sensitive to the DNA structural changes from single-stranded, double-stranded, or hairpin into a G-quadruplex configuration. Furthermore, the development of an increased number of G-quadruplex aptamers that combine the G-quadruplex stiffness and self-assembling versatility with the aptamer high specificity of binding to a variety of molecular targets allowed the construction of biosensors with increased selectivity and sensitivity. This review discusses the recent advances on the electrochemical characterization, design, and applications of G-quadruplex electrochemical biosensors in the evaluation of metal ions, G-quadruplex ligands, and other small organic molecules, proteins, and cells. The electrochemical and atomic force microscopy characterization of G-quadruplexes is presented. The incubation time and cations concentration dependence in controlling the G-quadruplex folding, stability, and nanostructures formation at carbon electrodes are discussed. Different G-quadruplex electrochemical biosensors design strategies, based on the DNA folding into a G-quadruplex, the use of G-quadruplex aptamers, or the use of hemin/G-quadruplex DNAzymes, are revisited.

An aptamer-based biosensor for detection of doxorubicin by electrochemical impedance spectroscopy

An aptamer-based biosensor was developed for the detection of doxorubicin using electrochemical impedance spectroscopy. Doxorubicin and its 14-dehydroxylated version daunorubicin are anthracyclines often used in cancer treatment. Due to their mutagenic and cardiotoxic effects, detection in groundwater is desirable. We developed a biosensor using the daunorubicin-binding aptamer as biological recognition element. The aptamer was successfully co-immobilized with mercaptohexanol on gold and a density of 1.3*10¹³ ± 2.4*10¹² aptamer molecules per cm² was achieved. The binding of doxorubicin to the immobilized aptamer was detected by electrochemical impedance spectroscopy. The principle is based on the inhibition of electron transfer between electrode and ferro-/ferricyanide in solution caused by the binding of doxorubicin to the immobilized aptamer. A linear relationship between the charge transfer resistance (R _ct ) and the doxorubicin concentration was obtained over the range of 31 nM to 125 nM doxorubicin, with an apparent binding constant of 64 nM and a detection limit of 28 nM. With the advantages of high sensitivity, selectivity, and simple sensor construction, this method shows a high potential of impedimetric aptasensors in environmental monitoring. Graphical abstract Measurement chamber and immobilization principle for the detection of doxorubicin by electrochemical impedance spectroscopy.

Electrochromic Sensor for Multiplex Detection of Metabolites Enabled by Closed Bipolar Electrode Coupling

Biosensors based on converting electrochemical signals into optical readouts are attractive candidates as low-cost, high-throughput sensor platforms. Here, we described a closed bipolar electrode (CBE)-based two-cell electrochromic device for sensing multiple metabolites, using the simultaneous detection of lactate, glucose, and uric acid as a model system. In the two-cell configuration, an analytical cell contains a redox mediator combined with a specific oxidase, e.g., lactate oxidase, glucose oxidase, or uricase, to form an electrochemical mediator-electrocatalyst pair that supports redox cycling. A closed bipolar electrode couples the electron transfer event in the analytical cell to an electrochromic reaction in a separate reporter cell, such that the magnitude of the color change is related to the concentration of metabolites in the analytical cell. To demonstrate multiplex operation, the CBE-based electrochromic detector is modified by integrating three sets of detection chemistries into a single device, in which simultaneous determination of glucose, lactate, and uric acid is demonstrated. Device sensitivity can be tuned by using reporter cells with different volumes. Furthermore, the analytical cell of this device can be fabricated as a disposable, paper-based carbon electrode without any pretreatment, demonstrating the potential to screen phenotypes that require multiple biomarkers in a point-of-care format.

An interdigital array microelectrode aptasensor based on multi-walled carbon nanotubes for detection of tetracycline

In this study an impedance aptasensor was designed for sensitive, selective, and fast detection of tetracycline (TET) based on an interdigital array microelectrode (IDAM). The IDAM was integrated with impedance detection to miniaturize the conventional electrodes, enhance the sensitivity, shorten the detection time, and minimize interfering effects of non-target analytes in the solution. Due to their excellent conductivity, good biocompatibility, the multi-walled carbon nanotubes (MWCNTs) were used to modify the IDAM to immobilize TET aptamer effectively. The proposed aptasensor produced a sensitive impedance change which was characterized by the electrochemical impedance spectroscopy (EIS). With the addition of TET, the formation of TET-aptamer complex on the surface of MWCNTs modified electrode resulted in an increase of electron transfer resistance (R _et). The change of R _et depends on the concentration of TET, which is applied for the quantification of TET. A wide linear range was obtained from 10^-9 to 10^-3 M. The linear regression equation was y(ΔR) = 21.310 × x(LogC) (M) + 217.25. It was successfully applied to detect TET in real milk samples.

Sensitive Bioanalysis Based on in-Situ Droplet Anodic Stripping Voltammetric Detection of CdS Quantum Dots Label after Enhanced Cathodic Preconcentration

We report a protocol of CdS-labeled sandwich-type amperometric bioanalysis with high sensitivity, on the basis of simultaneous chemical-dissolution/cathodic-enrichment of the CdS quantum dot biolabel and anodic stripping voltammetry (ASV) detection of Cd directly on the bioelectrode. We added a microliter droplet of 0.1 M aqueous HNO₃ to dissolve CdS on the bioelectrode and simultaneously achieved the potentiostatic cathodic preconcentration of Cd by starting the potentiostatic operation before HNO₃ addition, which can largely increase the ASV signal. Our protocol was used for immunoanalysis and aptamer-based bioanalysis of several proteins, giving limits of detection of 4.5 fg·mL⁻¹ for human immunoglobulin G, 3.0 fg·mL⁻¹ for human carcinoembryonic antigen (CEA), 4.9 fg·mL⁻¹ for human α-fetoprotein (AFP), and 0.9 fM for thrombin, which are better than many reported results. The simultaneous and sensitive analysis of CEA and AFP at two screen-printed carbon electrodes was also conducted by our protocol.

Proximity Binding and Metal Ion-Dependent DNAzyme Cyclic Amplification-Integrated Aptasensor for Label-Free and Sensitive Electrochemical Detection of Thrombin

Thrombin plays important roles for the diagnosis of neurodegenerative and cardiovascular diseases. By integrating proximity binding-induced strand displacement and metal ion-dependent DNAzyme recycling amplification, we demonstrate here the development of a simple and sensitive strategy for the detection of thrombin in human serums. The binding of the two distinct aptamers to the thrombin targets increases the local concentration of the aptamers and facilitates the release of the enzymatic sequences through proximity binding-induced strand displacement. The liberated enzymatic sequences further hybridize with the G-quadruplex containing and hairpin-structured substrate sequences on the sensor electrode to form the metal-ion dependent DNAzymes. Subsequently, the metal ions catalyze the cleavage of the substrate sequences to unlock the G-quadruplex forming sequences and to release the enzymatic sequences to trigger another cleavage cycle. Such metal ion-dependent DNAzyme recycling amplification leads to the formation of many active G-quadruplex forming sequences, which associate with hemin to form G-quadruplex/hemin complexes on the electrode surface. Direct electron transfer of hemin to the electrode during the potential scan can thus generate significantly amplified current for sensitive detection of thrombin at the low picomolar level. The work demonstrated here can thus offer new opportunities for the development of convenient signal amplification strategies for detecting various protein targets.

Aptamer-based fiber sensor for thrombin detection

The detection of thrombin based on aptamer binding is studied using two different optical fiber-based configurations: long period gratings coated with a thin layer of titanium dioxide and surface plasmon resonance devices in optical fibers coated with a multilayer of gold and titanium dioxide. These structures are functionalized and the performance to detect thrombin in the range 10 to 100 nM is compared in transmission mode. The sensitivity to the surrounding refractive index (RI) of the plasmonic device is higher than 3100  nm RIU−1 in the RI range 1.335 to 1.355, a factor of 20 greater than the sensitivity of the coated grating. The detection of 10 nM of thrombin was accomplished with a wavelength shift of 3.5 nm and a resolution of 0.54 nM.

An electrochemical label-free and sensitive thrombin aptasensor based on graphene oxide modified pencil graphite electrode

In this work, we tactfully constructed a novel label-free electrochemical aptasensor for rapid and facile detection of thrombin using graphene oxide (GO) and thrombin binding aptamer (TBA). The strategy relies on the preferential adsorption of single-stranded DNA (ssDNA) to GO over aptamer-target complexes. The TBA-thrombin complex formation was monitored by differential pulse voltammetry (DPV) using the guanine oxidation signal. In the absence of thrombin, the aptamers adsorbed onto the surface of GO leading to a strong background guanine oxidation signal. Conversely, in the presence of thrombin, the conformational transformation of TBA after incubating with the thrombin solution and formation of the aptamer-thrombin complexes which had weak binding ability to GO, leads to the desorption of TBA-thrombin complex from electrode surface and significant oxidation signal decrease. The selectivity of the biosensor was studied using other biological substances. The biosensor's signal was proportional to the thrombin concentration from 0.1 to 10nM with a detection limit of 0.07nM. Particularly, the proposed method could be widely applied to the aptamer-based determination of other target analytes.

Aptasensors Based on Whispering Gallery Mode Resonators

In this paper, we review the literature on optical evanescent field sensing in resonant cavities where aptamers are used as biochemical receptors. The combined advantages of highly sensitive whispering gallery mode resonator (WGMR)-based transducers, and of the unique properties of aptamers make this approach extremely interesting in the medical field, where there is a particularly high need for devices able to provide real time diagnosis for cancer, infectious diseases, or strokes. However, despite the superior performances of aptamers compared to antibodies and WGMR to other evanescent sensors, there is not much literature combining both types of receptors and transducers. Up to now, the WGMR that have been used are silica microspheres and silicon oxynitride (SiON) ring resonators.

A label-free electrochemical aptasensor based on graphene oxide/double-stranded DNA nanocomposite

A novel label-free electrochemical impedance aptasensor based on a gold nanoparticles/double-stranded DNA-graphene (AuNPs/dsDNA-GO) nanocomposite modified glassy carbon electrode was presented for quantitative determination of thrombin. GO was covalently functionalized with dsDNA via a facile amidation process, and then AuNPs were electrodeposited onto the surface of dsDNA-GO. The morphology, conductivity and interaction of the as-prepared nanocomposites were characterized by scanning electron microscopy, cyclic voltammetry, electrochemical impedance spectroscopy (EIS), Raman and Fourier transform infrared spectroscopy. The thrombin-binding aptamer (TBA) was conjugated to AuNPs via gold-thiol chemistry to construct electrochemical aptasensing platform, and the specific recognition between TBA and thrombin was monitored by EIS. Under optimum conditions, thrombin could be quantified in a wide range of 0.1-100nM (R(2)=0.9960) with low detection limit of 0.06nM (S/N=3).

Graphene-Assisted Label-Free Homogeneous Electrochemical Biosensing Strategy based on Aptamer-Switched Bidirectional DNA Polymerization

In this contribution, taking the discrimination ability of graphene over single-stranded (ss) DNA/double-stranded (ds) DNA in combination with the electrochemical impedance transducer, we developed a novel label-free homogeneous electrochemical biosensor using graphene-modified glassy carbon electrode (GCE) as the sensing platform. To convert the specific aptamer-target recognition into ultrasensitive electrochemical signal output, a novel aptamer-switched bidirectional DNA polymerization (BDP) strategy, capable of both target recycling and exponential signal amplification, was compatibly developed in this study. In this strategy, all the designed DNA structures could be adsorbed on the graphene/GCE and, thus, serve as the electrochemical impedance signal reporter, while the target acts as a trigger of this BDP reaction, in which these designed DNA structures are bound together and, then, converted to long dsDNA duplex. The distinct difference in electrochemical impedance spectroscopy between the designed structures and generated long dsDNA duplex on the graphene/GCE allows label-free and homogeneous detection of target down to femto-gram level. The target can be displaced from aptamer through the polymerization to initiate the next recognition-polymerization cycle. Herein, the design and signaling principle of aptamer-switched BDP amplification system were elucidated, and the working conditions were optimized. This method not only provides a universal platform for electrochemical biosensing but also shows great potential in biological process researches and clinic diagnostics.

Bi-functionalized aptasensor for ultrasensitive detection of thrombin

A novel bi-functionalized aptasensor for thrombin detection was fabricated by using electrochemiluminescence (ECL) and electrochemical impedance spectroscopy (EIS) techniques. A thiol-terminated aptamer with 15 oligonucleotides was hybridized with its complementary oligonucleotides to form a double-stranded DNA (dsDNA). Then, the thiol-labeled dsDNA was assembled on a Au electrode via Au-S bond; the other distal of the dsDNA labeled with biotin was bound to QDs through a biotin-avidin conjugation. When thrombin is present in the detection solution, the aptamer can combine with thrombin, resulting in loss of CdSe QDs from the electrode surface and thereby decreasing the ECL intensity and increasing the impedance. The decreased ECL and increased EIS signals are logarithmically linear with respect to the concentration of thrombin. The linear range was 10(-10)-10(-3) μg mL(-1) (R=0.9924) for the ECL signal and 10(-10)-10(-1) μg mL(-1) (R=0.9875) for the EIS method with a common detection limit of 10(-10) μg mL(-1) (2.7 aM). In addition, the bi-functionalized aptasensor exhibited excellent selectivity, super sensitivity, a low detection limit and a wide linear range.

Achieving reproducible performance of electrochemical, folding aptamer-based sensors on microelectrodes: challenges and prospects

Combining specific recognition capabilities with the excellent spatiotemporal resolution of small electrodes represents a promising methodology in bioanalytical and chemical sensing. In this paper, we report the development of reproducible electrochemical, aptamer-based (E-AB) sensors on a gold microelectrode platform. Specifically, we develop microscale sensors (25 μm diameter) for two representative small molecule targets–adenosine triphosphate and tobramycin. Furthermore, we report on the challenges encountered at this size scale including small-magnitude signals and interference from the irreversible reduction of dissolved oxygen and present methods to circumvent these challenges. Through the electrochemical deposition of dendritic gold nanostructures, we demonstrate microscale sensors with improved performance by increasing signal-to-noise and consequently sensitivity. Finally, we report on the use of the nonspecific adsorption of serum proteins as an additional layer of surface passivation for stable sensor performance. The sensor development here represents general guidelines for fabricating electrochemical, folding aptamer-based sensors on small-scale electrodes.

Electrochemical quantification of the antioxidant capacity of medicinal plants using biosensors

The working area of a screen-printed electrode, SPE, was modified with the enzyme tyrosinase (Tyr) using different immobilization methods, namely entrapment with water-soluble polyvinyl alcohol (PVA), cross-linking using glutaraldehyde (GA), and cross-linking using GA and human serum albumin (HSA); the resulting electrodes were termed SPE/Tyr/PVA, SPE/Tyr/GA and SPE/Tyr/HSA/GA, respectively. These biosensors were characterized by means of amperometry and EIS techniques. From amperometric evaluations, the apparent Michaelis-Menten constant, K_m′, of each biosensor was evaluated while the respective charge transfer resistance, Rct, was assessed from impedance measurements. It was found that the SPE/Tyr/GA had the smallest K_m′ (57 ± 7) μM and Rct values. This electrode also displayed both the lowest detection and quantification limits for catechol quantification. Using the SPE/Tyr/GA, the Trolox Equivalent Antioxidant Capacity (TEAC) was determined from infusions prepared with “mirto” (Salvia microphylla), “hHierba dulce” (Lippia dulcis) and “salve real” (Lippia alba), medicinal plants commonly used in Mexico.

Electrogenerated chemiluminescence aptasensor for ultrasensitive detection of thrombin incorporating an auxiliary probe

A novel electrogenerated chemiluminescence (ECL) aptasensor for ultrasensitive detection of thrombin incorporating an auxiliary probe was designed by employing specific anti-thrombin aptamer as a capture probe and a ruthenium(II) complex-tagged reporter probe as an ECL probe and an auxiliary probe to assist the ECL probe close to the surface of the electrode. The ECL aptasensor was fabricated by self-assembling a thiolated capture probe on the surface of gold electrode and then hybridizing the ECL probe with the capture probe, and further self-assembling the auxiliary probe. When analyte thrombin was bound with the capture probe, the part of the dehybridized ECL probe was hybridized with the neighboring auxiliary probe, led to the tagged ruthenium(II) complex close to the electrode surface, resulted in great increase in the ECL intensity. The results showed that the increased ECL intensity was directly related to the logarithm of thrombin concentrations in the range from 5.0 × 10(-15)M to 5.0 × 10(-12)M with a detection limit of 2.0 × 10(-15)M. This work demonstrates that employing an auxiliary probe which exists nearby the capture probe can enhance the sensitivity of the ECL aptasensor. This promising strategy will be extended to the design of other biosensors for detection of other proteins and genes.