Homogeneous detection of concanavalin A using pyrene-conjugated maltose assembled graphene based on fluorescence resonance energy transfer

Sandwich photoelectrochemical biosensing of concanavalin A based on CdS/AuNPs/NiO Z-scheme heterojunction and lectin-sugar binding

A CdS/AuNPs/NiO Z-scheme heterojunction was prepared on a fluorine-doped tin oxide (FTO) electrode by hydrothermal synthesis of NiO on FTO, electrodeposition of AuNPs on NiO/FTO electrode and then cast-coating of CdS quantum dots. The CdS/AuNPs/NiO/FTO electrode gave a notably increased photocurrent versus NiO/FTO, CdS/FTO, AuNPs/NiO/FTO, CdS/AuNPs/FTO and CdS/NiO/FTO electrodes. The CdS/AuNPs/NiO/FTO electrode was further cast-coated with chitosan to immobilize d-mannose by Schiff base reaction, and concanavalin A (ConA) and then horseradish peroxidase (HRP) were captured on the electrode surface by lectin-sugar binding. 4-Chloro-1-naphthol (4-CN) was oxidized to form an insoluble precipitate catalyzed by HRP in the presence of H₂O₂, and the presence of precipitate on the photoelectrode inhibited the photocurrent in the presence of holes scavenger ascorbic acid. The relevant electrodes were characterized by electrochemistry, quartz crystal microbalance (QCM), UV-vis spectrophotometry, scanning electron microscopy/energy dispersive spectroscopy, and transmission electron microscopy. The QCM revealed that the collection efficiency (η) of the 4-CN-electrooxidation precipitate on the electrode can be as high as 91.8%. Under the optimal conditions, the decline of photocurrent responded linearly to the common logarithm of ConA concentration from 50 pM to 500 nM, with a limit of detection of 17 pM (S/N = 3). Satisfactory results were obtained in the detection of real soybean samples.

Carbon-based glyco-nanoplatforms: towards the next generation of glycan-based multivalent probes

Cell surface carbohydrates mediate a wide range of carbohydrate-protein interactions key to healthy and disease mechanisms. Many of such interactions are multivalent in nature and in order to study these processes at a molecular level, many glycan-presenting platforms have been developed over the years. Among those, carbon nanoforms such as graphene and their derivatives, carbon nanotubes, carbon dots and fullerenes, have become very attractive as biocompatible platforms that can mimic the multivalent presentation of biologically relevant glycosides. The most recent examples of carbon-based nanoplatforms and their applications developed over the last few years to study carbohydrate-mediate interactions in the context of cancer, bacterial and viral infections, among others, are highlighted in this review.

Ball milled glyco-graphene oxide conjugates markedly disrupted Pseudomonas aeruginosa biofilms

The engineering of the surface of nanomaterials with bioactive molecules allows controlling their biological identity thus accessing functional materials with tuned physicochemical and biological profiles suited for specific applications. Then, the manufacturing process, by which the nanomaterial surface is grafted, has a significant impact on their development and innovation. In this regard, we report herein the grafting of sugar headgroups on a graphene oxide (GO) surface by exploiting a green manufacturing process that relies on the use of vibrational ball mills, a grinding apparatus in which the energy is transferred to the reacting species through collision with agate spheres inside a closed and vibrating vessel. The chemical composition and the morphology of the resulting glyco-graphene oxide conjugates (glyco-GO) are assessed by the combination of a series of complementary advanced techniques (i.e. UV-vis and Raman spectroscopy, transmission electron microscopy, and Magic Angle Spinning (MAS) solid-state NMR (ssNMR) providing in-depth insights into the chemical reactivity of GO in a mechanochemical route. The conjugation of monosaccharide residues on the GO surface significantly improves the antimicrobial activity of pristine GO against P. aeruginosa. Indeed, glyco-GO conjugates, according to the monosaccharide derivatives installed into the GO surface, affect the ability of sessile cells to adhere to a polystyrene surface in a colony forming assay. Scanning electron microscopy images clearly show that glyco-GO conjugates significantly disrupt an already established P. aeruginosa biofilm.

On the interface between biomaterials and two-dimensional materials for biomedical applications

Two-dimensional (2D) materials have garnered significant attention due to their ultrathin 2D structures with a high degree of anisotropy and functionality. Reliable manipulation of interfaces between 2D materials and biomaterials is a new frontier for biomedical nanoscience and combining biomaterials with 2D materials offers a promising way to fabricate innovative 2D biomaterials composites with distinct functionality for biomedical applications. Here, we focus exclusively on a summary of the current work in the interface investigation of 2D biomaterials. Specifically, we highlight extraordinary features that make 2D materials so desirable, as well as the molecular level interactions between 2D materials and biomaterials that have been studied thus far. Furthermore, the approaches for investigating the interface characteristics of 2D biomaterials are presented and described in depth. To capture the emerging trend in mass manufacturing of 2D materials, we review the research progress on biomaterial-assisted exfoliation. Finally, we present a critical assessment of newly developed 2D biomaterials in biomedical applications.

Polydopamine functionalized graphene sheets decorated with magnetic metal oxide nanoparticles as efficient nanozyme for the detection and degradation of harmful triazine pesticides

A facile and an eco-friendly reduction and functionalization of reduced graphene oxide (rGO) sheets is carried out using dopamine and decorated with magnetic Fe₃O₄ nanoparticles with an average size of 12 nm by a simple co-precipitation method which is established as an artificial nanozyme. Here, functionalization of graphene using dopamine has introduced several advantages and insights into this study. The Fe₃O₄ nanoparticles decorated functionalized rGO sheets (FDGs) nanozymes are characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), high-resolution transmission electron microscopy (HRTEM), Raman spectroscopy, atomic force microscopy (AFM), thermogravimetric (TGA) and vibrating sample magnetometer (VSM) analysis. FDGs nanozymes exhibits dual characteristics towards detection and degradation of harmful simazine pesticide. The hydrogen bonding interactions between pesticide molecules and 3,3',5,5'-tetramethylbenzidine (TMB) causes inhibition of the catalytic activity of the FDGs towards oxidation of TMB molecule. Based on that, the presence of simazine pesticide in an aqueous medium can be easily determined and a certain value (2.24 μM) of detection limit was achieved. The photocatalytic degradation of simazine is also executed and excellent photocatalytic activity was observed under irradiation of direct natural sunlight. The FDGs nanozyme is also reusable up to several times with insignificant loss in its catalytic activity towards simazine degradation.

Graphene, an Interesting Nanocarbon Allotrope for Biosensing Applications: Advances, Insights, and Prospects

Graphene, a relatively new two-dimensional (2D) nanomaterial, possesses unique structure (e.g. lighter, harder, and more flexible than steel) and tunable physicochemical (e.g. electronical, optical) properties with potentially wide eco-friendly and cost-effective usage in biosensing. Furthermore, graphene-related nanomaterials (e.g. graphene oxide, doped graphene, carbon nanotubes) have inculcated tremendous interest among scientists and industrials for the development of innovative biosensing platforms, such as arrays, sequencers and other nanooptical/biophotonic sensing systems (e.g. FET, FRET, CRET, GERS). Indeed, combinatorial functionalization approaches are constantly improving the overall properties of graphene, such as its sensitivity, stability, specificity, selectivity, and response for potential bioanalytical applications. These include real-time multiplex detection, tracking, qualitative, and quantitative characterization of molecules (i.e. analytes [H₂O₂, urea, nitrite, ATP or NADH]; ions [Hg²⁺, Pb²⁺, or Cu²⁺]; biomolecules (DNA, iRNA, peptides, proteins, vitamins or glucose; disease biomarkers such as genetic alterations in BRCA1, p53) and cells (cancer cells, stem cells, bacteria, or viruses). However, there is still a paucity of comparative reports that critically evaluate the relative toxicity of carbon nanoallotropes in humans. This manuscript comprehensively reviews the biosensing applications of graphene and its derivatives (i.e. GO and rGO). Prospects and challenges are also introduced.

Simultaneous quadruple-channel optical transduction of a nanosensor for multiplexed qualitative and quantitative analysis of lectins

A multichannel optical nanosensor capable of identifying and quantitating multiple lectins simultaneously was developed. The quadruple channel of fluorescence and scattering signals can be in situ collected from the same solution system, which offers high accuracy, discrimination resolution and measurement convenience. This nanosensor can in principle be generalized to the analysis of all lectins and saccharide binding organisms.

Rapid Detection of Copper in Biological Systems Using Click Chemistry

A fast (1 min), straightforward but efficient, click chemistry-based system that enables the rapid detection of free copper (Cu) ions in either biological fluids or living cells without tedious pretreatment is provided. Cu can quickly induce the conjugation between graphene oxide (GO) and a fluorescent dye via click reaction. On the basis of the high specificity of bioorthogonal reaction and the effective quenching ability of GO, the assay studied in this paper can respond to Cu ions in less than 1 min with excellent selectivity and sensitivity, which is the fastest sensor for Cu as far as it is known. In addition, the application of this system is verified by performing assays in living cells and untreated urine samples from patients suffering from Wilson's Disease. Such a Cu detection system shows great promises in both fundamental research and routine clinical diagnostics.

A MnO2 nanosheet-assisted GSH detection platform using an iridium(iii) complex as a switch-on luminescent probe

A rapid and sensitive detection platform for GSH has been constructed by combining a MnO₂ nanosheet with a luminescent iridium(iii) complex [Ir(Cl-phq)₂(Cl-phen)]⁺. The MnO₂ nanosheet was prepared by using a facile one-step approach and was characterized by TEM. The luminescence intensity of the detection platform responded linearly with the GSH concentration from 1 to 200 μM (R² = 0.9951), and the detection limit for GSH was 0.13 μM. More importantly, practical application of the detection platform for visualizing the intracellular GSH distribution in living zebrafish has also been demonstrated.

Enhanced Electronic Communication and Electrochemical Sensitivity Benefiting from the Cooperation of Quadruple Hydrogen Bonding and π-π Interactions in Graphene/Multi-Walled Carbon Nanotube Hybrids

By designing a molecule labeled as UPPY with both ureidopyrimidinone (UP) and pyrene (PY) units, the supramolecular self-assembly of multiwalled carbon nanotube (MWNT) and reduced graphene oxide (rGO) was driven by the UP quadruple hydrogen-bonding and PY-based π-π interactions to form a novel hybrid of rGO-UPPY-MWNT in which the morphology of rGO-wrapped MWNT was found. Bridged by the two kinds of noncovalent bonding, enhanced electronic communication occurred in rGO-UPPY-MWNT. Also, under the cooperation of UP quadruple hydrogen-bonding and PY-based π-π interactions, higher electrical conductivity and better charge transfer were observed for rGO-UPPY-MWNT, compared with the rGO-MWNT composite without such noncovalent bonds, and that with just single PY-based π-π interaction (rGO-PY-MWNT) or UP quadruple hydrogen bond (rGO-UP-MWNT). Specifically, the electrical conductivity of rGO-PY-MWNT hybrids was increased approximately sevenfold, and the interfacial charge transfer resistance was nearly decreased by 1 order of magnitude compared with rGO-MWNT, rGO-UP-MWNT, and rGO-PY-MWNT. Resulting from its excellent electrical conductivity and charge transfer properties, the rGO-UPPY-MWNT modified electrode exhibited enhanced electrochemical activity toward dopamine with detection limit as low as 20 nM.

When biomolecules meet graphene: from molecular level interactions to material design and applications

Graphene-based materials have attracted increasing attention due to their atomically-thick two-dimensional structures, high conductivity, excellent mechanical properties, and large specific surface areas. The combination of biomolecules with graphene-based materials offers a promising method to fabricate novel graphene-biomolecule hybrid nanomaterials with unique functions in biology, medicine, nanotechnology, and materials science. In this review, we focus on a summarization of the recent studies in functionalizing graphene-based materials using different biomolecules, such as DNA, peptides, proteins, enzymes, carbohydrates, and viruses. The different interactions between graphene and biomolecules at the molecular level are demonstrated and discussed in detail. In addition, the potential applications of the created graphene-biomolecule nanohybrids in drug delivery, cancer treatment, tissue engineering, biosensors, bioimaging, energy materials, and other nanotechnological applications are presented. This review will be helpful to know the modification of graphene with biomolecules, understand the interactions between graphene and biomolecules at the molecular level, and design functional graphene-based nanomaterials with unique properties for various applications.

Graphene-Based Fluorescence-Quenching-Related Fermi Level Elevation and Electron-Concentration Surge

Intermolecular p-orbital overlaps in unsaturated π-conjugated systems, such as graphene and fluorescent molecules with aromatic structure, serve as the electron-exchanged path. Using Raman-mapping measurements, we observe that the fluorescence intensity of fluorescein isothiocyanate (FITC) is quenched by graphene, whereas it persists in graphene-absent substrates (SiO2). After identifying a mechanism related to photon-induced electron transfer (PET) that contributes to this fluorescence quenching phenomenon, we validate this mechanism by conducting analyses on Dirac point shifts of FITC-coated graphene. From these shifts, Fermi level elevation and the electron-concentration surge in graphene upon visible-light impingements are acquired. Finally, according to this mechanism, graphene-based biosensors are fabricated to show the sensing capability of measuring fluorescently labeled-biomolecule concentrations.

Glyconanomaterials for biosensing applications

Nanomaterials constitute a class of structures that have unique physiochemical properties and are excellent scaffolds for presenting carbohydrates, important biomolecules that mediate a wide variety of important biological events. The fabrication of carbohydrate-presenting nanomaterials, glyconanomaterials, is of high interest and utility, combining the features of nanoscale objects with biomolecular recognition. The structures can also produce strong multivalent effects, where the nanomaterial scaffold greatly enhances the relatively weak affinities of single carbohydrate ligands to the corresponding receptors, and effectively amplifies the carbohydrate-mediated interactions. Glyconanomaterials are thus an appealing platform for biosensing applications. In this review, we discuss the chemistry for conjugation of carbohydrates to nanomaterials, summarize strategies, and tabulate examples of applying glyconanomaterials in in vitro and in vivo sensing applications of proteins, microbes, and cells. The limitations and future perspectives of these emerging glyconanomaterials sensing systems are furthermore discussed.

Photoluminescence Architectures for Disease Diagnosis: From Graphene to Thin-Layer Transition Metal Dichalcogenides and Oxides

Ever since the discovery of graphene, increasing efforts have been devoted to the use of this stellar material as well as the development of other graphene-like materials such as thin-layer transition metal dichalcogenides and oxides (TMD/Os) for a variety of applications. Because of their large surface area and unique optical properties, these two-dimensional materials with a size ranging from the micro- to the nanoscale have been employed as the substrate to construct photoluminescence architectures for disease diagnosis as well as theranostics. These architectures are built through the simple self-assembly of labeled biomolecular probes with the substrate material, leading to signal quenching. Upon the specific interaction of the architecture with a target biomarker, the signal can be spontaneously restored in a reversible manner. Meanwhile, by co-loading therapeutic agents and employing the inherent photo-thermal properties of the material substrates, a combined disease imaging and therapy (theranostics) can be achieved. This review highlights the latest advances in the construction and application of graphene and TMD/O based thin-layer material composites for single-target and multiplexed detection of a variety of biomarkers and theranostics. These versatile material architectures, owing to their ease in preparation, low cost and flexibility in functionalization, provide promising tools for both basic biochemical research and clinical applications.

A novel aptamer-mediated CuInS2quantum dots@graphene oxide nanocomposites-based fluorescence “turn off–on” nanosensor for highly sensitive and selective detection of kanamycin

A novel aptamer-mediated fluorescence “turn off–on” nanosensor for highly sensitive and selective detection of kanamycin using CuInS₂quantum dots@graphene oxide.

Applications of graphene and its derivatives in intracellular biosensing and bioimaging

Graphene has a unique planar structure, as well as excellent electronic properties, and has attracted a great deal of interest from scientists.

Carbohydrates in Supramolecular Chemistry

Carbohydrates are involved in a variety of biological processes. The ability of sugars to form a large number of hydrogen bonds has made them important components for supramolecular chemistry. We discuss recent advances in the use of carbohydrates in supramolecular chemistry and reveal that carbohydrates are useful building blocks for the stabilization of complex architectures. Systems are presented according to the scaffold that supports the glyco-conjugate: organic macrocycles, dendrimers, nanomaterials, and polymers are considered. Glyco-conjugates can form host-guest complexes, and can self-assemble by using carbohydrate-carbohydrate interactions and other weak interactions such as π-π interactions. Finally, complex supramolecular architectures based on carbohydrate-protein interactions are discussed.

Glyconanomaterials for Combating Bacterial Infections

Bacterial infections constitute an increasing problem to human health in response to build-up of resistance to present antibiotics and sluggish development of new pharmaceuticals. However, a means to address this problem is to pinpoint the drug delivery to-and into-the bacteria. This results in a high local concentration of the drug, circumventing the increasingly high doses otherwise necessary. Combined with other effectors, such as covalent attachment to carriers, rendering the drugs less degradable, and the combination with efflux inhibitors, old drugs can be revived. In this context, glyconanomaterials offer exceptional potential, since these materials can be tailored to accommodate different effectors. In this Concept article, we describe the different advantages of glyconanomaterials, and point to their potential in antibiotic "revitalization".

Label-free fluorescence strategy for sensitive microRNA detection based on isothermal exponential amplification and graphene oxide

MicroRNAs (miRNAs) play an important role in many biological processes, and have been regarded as potential targets and biomarkers in cancer diagnosis and therapy. Also, to meet the big challenge imposed by the characteristics of miRNAs, such as small size and vulnerability to enzymatic digestion, it is of great importance to develop accurate, sensitive and simple miRNA assays. Herein, we developed a label-free fluorescence strategy for sensitive miRNA detection by combining isothermal exponential amplification and the unique features of SYBR Green I (SG) and graphene oxide (GO), in which SG gives significantly enhanced fluorescence upon intercalation into double-stranded DNAs (dsDNAs), and GO selectively adsorbs miRNA, single-stranded DNA and SG, to protect miRNA from enzymatic digestion, and to quench the fluorescence of the adsorbed SG. In the presence of the target miRNA, the ingeniously designed hairpin probe (HP) is unfolded and the subsequent polymerization and strand displacement reaction takes place to initiate the target recycling process. The newly formed dsDNAs are then recognized and cleaved by the nicking enzyme, generating new DNA triggers with the same sequence as the target miRNA, which hybridize with intact HPs to initiate new extension reactions. As a result, the circular exponential amplification for target miRNA is achieved and large amount of dsDNAs are formed to generate significantly enhanced fluorescence upon the intercalation of SG. Thus sensitive and selective fluorescence miRNA detection is realized, and the detection limit of 3 fM is obtained. Besides, this method exhibits additional advantages of simplicity and low cost, since expensive and tedious labeling process is avoided. Therefore, the as-proposed label-free fluorescence strategy has great potential in the applications in miRNA-related clinical practices and biochemical researches.

Universal Fluorescence Biosensor Platform Based on Graphene Quantum Dots and Pyrene-Functionalized Molecular Beacons for Detection of MicroRNAs

A novel biosensor platform was developed for detection of microRNAs (miRNAs) based on graphene quantum dots (GQDs) and pyrene-functionalized molecular beacon probes (py-MBs). Pyrene was introduced to trigger specifically fluorescence resonance energy transfer (FRET) between GQDs and fluorescent dyes labeled on py-MBs, and the unique fluorescent intensity change produced a novel signal for detection of the target. The platform realized detection of miRNAs in a wide range from 0.1 nM to 200 nM with great discrimination abilities, as well as multidetection of different kinds of miRNAs, which paved a brand new way for miRNA detection based on GQDs.

Biosensing with Förster Resonance Energy Transfer Coupling between Fluorophores and Nanocarbon Allotropes

Nanocarbon allotropes (NCAs), including zero-dimensional carbon dots (CDs), one-dimensional carbon nanotubes (CNTs) and two-dimensional graphene, exhibit exceptional material properties, such as unique electrical/thermal conductivity, biocompatibility and high quenching efficiency, that make them well suited for both electrical/electrochemical and optical sensors/biosensors alike. In particular, these material properties have been exploited to significantly enhance the transduction of biorecognition events in fluorescence-based biosensing involving Förster resonant energy transfer (FRET). This review analyzes current advances in sensors and biosensors that utilize graphene, CNTs or CDs as the platform in optical sensors and biosensors. Widely utilized synthesis/fabrication techniques, intrinsic material properties and current research examples of such nanocarbon, FRET-based sensors/biosensors are illustrated. The future outlook and challenges for the research field are also detailed.

Facile preparation of graphene nanoribbon/cobalt coordination polymer nanohybrid for non-enzymatic H2O2 sensing by dual transduction: electrochemical and fluorescence

A novel graphene nanoribbon (GNR)/cobalt coordination polymer (MCPs) composite (MCPs@GNR) is prepared by in situ reduction of graphene oxide nanoribbon (GONR) with simultaneous growth of MCPs nanoparticles on its surface demonstrating high H₂O₂ sensing.

A biosensing platform for sensitive detection of concanavalin A based on fluorescence resonance energy transfer from CdTe quantum dots to graphene oxide

The sandwich method can detect different lectins simply by exchanging the carbohydrates functionalized on the quantum dots and graphene oxide.

Glyconanomaterials: Emerging applications in biomedical research

Carbohydrates constitute the most abundant organic matter in nature, serving as structural components and energy sources, and mediating a wide range of cellular activities. The emergence of nanomaterials with distinct optical, magnetic, and electronic properties has witnessed a rapid adoption of these materials for biomedical research and applications. Nanomaterials of various shapes and sizes having large specific surface areas can be used as multivalent scaffolds to present carbohydrate ligands. The resulting glyconanomaterials effectively amplify the glycan-mediated interactions, making it possible to use these materials for sensing, imaging, diagnosis, and therapy. In this review, we summarize the synthetic strategies for the preparation of various glyconanomaterials. Examples are given where these glyconanomaterials have been used in sensing and differentiation of proteins and cells, as well as in imaging glycan-medicated cellular responses.

Organic liquids-responsive β-cyclodextrin-functionalized graphene-based fluorescence probe: label-free selective detection of tetrahydrofuran

In this study, a label-free graphene-based fluorescence probe used for detection of volatile organic liquids was fabricated by a simple, efficient and low-cost method. To fabricate the probe, a bio-based β-cyclodextrin (β-CD) was firstly grafted on reduced graphene surfaces effectively and uniformly, as evidenced by various characterization techniques such as Ultraviolet/Visible spectroscopy, Fourier transform infrared spectroscopy, X-ray diffraction, thermogravimetric analysis, scanning electron microscopy and transmission electron microscopy. The subsequent inclusion of Rhodamine B (RhB) into the inner cavities of the β-CD grafted on the graphene surfaces was achieved easily by a solution mixing method, which yielded the graphene-based fluorescent switch-on probe. In addition, the gradual and controllable quenching of RhB by Fluorescence Resonance Energy Transfer from RhB to graphene during the process of stepwise accommodation of the RhB molecules into the β-CD-functionalized graphene was investigated in depth. A wide range of organic solvents was examined using the as-fabricated fluorescence probe, which revealed the highest sensitivity to tetrahydrofuran with the detection limit of about 1.7 μg/mL. Some insight into the mechanism of the different responsive behaviors of the fluorescence sensor to the examined targets was also described.

Electrochemical sensing of concanavalin A using a non-ionic surfactant with a maltose moiety

To electrochemically detect concanavalin A (ConA), a new method was developed using mixed micelles between a non-ionic surfactant with a maltose moiety and electroactive daunomycin. The surfactants, in which the length of the alkyl chain was different, were n-decyl-β-D-maltoside, n-dodecyl-β-D-maltoside, and n-tetradecyl-β-D-maltoside. The measurement principle was due to the micelle breakdown caused by the binding between the ConA and maltose moieties. When ConA was combined with maltose moieties at a concentration of surfactant that was near the critical micelle concentration, the daunomycin that formed the micelles was moved to a solution from the micelles. As a result, the peak current of daunomycin increased as the concentration of ConA was increased. The mechanism was proposed using voltammetry, spectrometry, and gel filtration. The linear range using n-tetradecyl-β-D-maltoside was 2.0×10(-9) to 8.0×10(-8) M of ConA, and it was the most sensitive in the presence of the three surfactants. To examine whether selective binding took place, measurements with several proteins were carried out. The electrode responses of daunomycin were not influenced by the presence of 5.0×10(-6) M protein. Furthermore, this method could be applied to the determination of ConA in a serum, and to the measurement of sugar chains that can be combined with ConA on the cell surface.

Synthesis of water-soluble Ag2Se QDs as a novel resonance Rayleigh scattering sensor for highly sensitive and selective ConA detection

Schematic illustration for fabricating TGA and glycine modified Ag₂Se QDs for RRS detection of ConA.

Fluorogenic probing of specific recognitions between sugar ligands and glycoprotein receptors on cancer cells by an economic graphene nanocomposite

Economical nanocomposites based on π-stacking of N-acetyl glycosyl rhodamine B to graphene oxide (GO) are simply prepared. These "sweet" GO-materials are proven to be admirable for the fluorogenic recognition of specific intercellular sugar-based ligand-glycoprotein receptor interactions of interest.

Universal distance-scaling of nonradiative energy transfer to graphene

The near-field interaction between fluorescent emitters and graphene exhibits rich physics associated with local dipole-induced electromagnetic fields that are strongly enhanced due to the unique properties of graphene. Here, we measure emitter lifetimes as a function of emitter-graphene distance d, and find agreement with a universal scaling law, governed by the fine-structure constant. The observed energy transfer rate is in agreement with a 1/d(4) dependence that is characteristic of two-dimensional lossy media. The emitter decay rate is enhanced 90 times (energy transfer efficiency of ~99%) with respect to the decay in vacuum at distances d ≈ 5 nm. This high energy transfer rate is mainly due to the two-dimensionality and gapless character of the monatomic carbon layer. Graphene is thus shown to be an extraordinary energy sink, holding great potential for photodetection, energy harvesting, and nanophotonics.

Electrochemical sensor using neomycin-imprinted film as recognition element based on chitosan-silver nanoparticles/graphene-multiwalled carbon nanotubes composites modified electrode

A novel imprinted electrochemical sensor for neomycin recognition was developed based on chitosan-silver nanoparticles (CS-SNP)/graphene-multiwalled carbon nanotubes (GR-MWCNTs) composites decorated gold electrode. Molecularly imprinted polymers (MIPs) were synthesized by electropolymerization using neomycin as the template, and pyrrole as the monomer. The mechanism of the fabrication process and a number of factors affecting the activity of the imprinted sensor have been discussed and optimized. The characterization of imprinted sensor has been carried out by scanning electron microscope (SEM) and Fourier transform infrared spectroscopy (FTIR). The performance of the proposed imprinted sensor has been investigated using cyclic voltammetry (CV) and amperometry. Under the optimized conditions, the linear range of the sensor was from 9×10(-9)mol/L to 7×10(-6)mol/L, with the limit of detection (LOD) of 7.63×10(-9)mol/L (S/N=3). The film exhibited high binding affinity and selectivity towards the template neomycin, as well as good reproducibility and stability. Furthermore, the proposed sensor was applied to determine the neomycin in milk and honey samples based on its good reproducibility and stability, and the acceptable recovery implied its feasibility for practical application.

A novel molecular beacon bearing a graphite nanoparticle as a nanoquencher for in situ mRNA detection in cancer cells

Molecular beacons (MBs) have shown fascinating applications in many biological fields. However, exploration of cost-effective, sensitive, stable and efficient MB for in situ live cell- based assay has still room for improvement. In this regards, we have developed a novel MB which bears a spherical graphite nanoparticle (GN) as a fluorescent quencher. The GN resulted in the high quenching efficiency, and the presence of GN enhanced the biological stability and transfection of the MB into the cells, thereby enabling the real-time survivin mRNA detection and quantification in the MCF-7 breast cancer cells. These results demonstrated that the advancement of the proposed MB containing a GN nanoquencher can be used as a robust molecular probe for genetic analysis in the cells.