A polycarbonate based surface plasmon resonance sensing cartridge for high sensitivity HBV loop-mediated isothermal amplification

Portable loop-mediated isothermal amplification device with spectrometric detection for rapid pathogen identification

With the rise in extreme weather due to global warming, coupled with globalization facilitating the spread of infectious diseases, there's a pressing need for portable testing platforms offering simplicity, low cost, and remote transmission, particularly beneficial in resource-limited and non-urban areas. We have developed a portable device using loop-mediated isothermal amplification (LAMP) with spectrometric detection to identify Salmonella Typhimurium DNA. The device utilizes the LinkIt 7697 microcontroller and a microspectrometer to capture and transmit spectral signals in real-time, allowing for improved monitoring and analysis of the reaction progress. We built a hand-held box containing a microspectrometer, thermoelectric cooler, ultraviolet LED, disposable reaction tube, and homemade thermal module, all powered by rechargeable batteries. Additionally, we conducted thorough experiments to ensure temperature accuracy within 1 °C under thermal control, developed a heating module with a LinkIt 7697 IoT development board to heat the DNA mixture to the reaction temperature within 3 min, and integrated foam insulation and a 3D-printed frame to enhance the device's thermal stability. We successfully demonstrated the amplification of Salmonella Typhimurium DNA with an impressive sensitivity of 2.83 × 10-4 ng/μL. A remote webpage interface allows for monitoring the temperature and fluorescence during the LAMP process, improving usability. This portable LAMP device with real-time detection offers a cost-effective solution for detecting Salmonella Typhimurium in food products. Its unique design and capabilities make it a promising tool for ensuring food safety.

Nucleic acid-based electrochemical biosensors

Colorectal cancer, breast cancer, oxidative DNA damage, and viral infections are all significant and major health threats to human health, presenting substantial challenges in early diagnosis. In this regard, a wide range of nucleic acid-based electrochemical platforms have been widely employed as point-of-care diagnostics in health care and biosensing technologies. This review focuses on biosensor design strategies, underlying principles involved in the development of advanced electrochemical genosensing devices, approaches for immobilizing DNA on electrode surfaces, as well as their utility in early disease diagnosis, with a particular emphasis on cancer, leukaemia, oxidative DNA damage, and viral pathogen detection. Notably, the role of biorecognition elements and nanointerfaces employed in the design and development of advanced electrochemical genosensors for recognizing biomarkers related to colorectal cancer, breast cancer, leukaemia, oxidative DNA damage, and viral pathogens has been extensively reviewed. Finally, challenges associated with the fabrication of nucleic acid-based biosensors to achieve high sensitivity, selectivity, a wide detection range, and a low detection limit have been addressed. We believe that this review will provide valuable information for scientists and bioengineers interested in gaining a deeper understanding of the fabrication and functionality of nucleic acid-based electrochemical biosensors for biomedical diagnostic applications.

Recent advancements with loop-mediated isothermal amplification (LAMP) in assessment of the species authenticity with meat and seafood products

Species adulteration or mislabeling with meat and seafood products could negatively affect the fair trade, wildlife conservation, food safety, religion aspect, and even the public health. While PCR-based methods remain the gold standard for assessment of the species authenticity, there is an urgent need for alternative testing platforms that are rapid, accurate, simple, and portable. Owing to its ease of use, low cost, and rapidity, LAMP is becoming increasingly used method in food analysis for detecting species adulteration or mislabeling. In this review, we outline how the features of LAMP have been leveraged for species authentication test with meat and seafood products. Meanwhile, as the trend of LAMP detection is simple, rapid and instrument-free, it is of great necessity to carry out end-point visual detection, and the principles of various end-point colorimetry methods are also reviewed. Moreover, with the aim to enhance the LAMP reaction, different strategies are summarized to either suppress the nonspecific amplification, or to avoid the results of nonspecific amplification. Finally, microfluidic chip is a promising point-of-care method, which has been the subject of a great deal of research directed toward the development of microfluidic platforms-based LAMP systems for the species authenticity with meat and seafood products.

Current and Future Advances in the Detection and Surveillance of Biosecurity-Relevant Equine Bacterial Diseases Using Loop-Mediated Isothermal Amplification (LAMP)

Horses play an important role throughout the world, whether for work, culture, or leisure, providing an ever-growing significant contribution to the economy. The increase in importation and movement of horses, both nationally and internationally, has inevitably allowed for the global equine industry to grow. Subsequently, however, the potential for transmission of fatal equine bacterial diseases has also escalated, and devasting outbreaks continue to occur. To prevent such events, disease surveillance and diagnosis must be heightened throughout the industry. Current common, or "gold-standard" techniques, have shown to be inadequate at times, thus requiring newer technology to impede outbreaks. Loop-mediated isothermal amplification (LAMP) has proven to be a reliable, rapid, and accessible tool in both diagnostics and surveillance. This review will discuss equine bacterial diseases of biosecurity relevance and their current diagnostic approaches, as well as their respective LAMP assay developments. Additionally, we will provide insight regarding newer technology and advancements associated with this technique and their potential use for the outlined diseases.

Paper-based diagnostic chips for viral detection

Viruses cause various diseases in humans, and pose serious health risks to individuals and populations worldwide. As a result, various diagnostic procedures and methods have been developed to prevent, manage, and reduce the burden of viral diseases, each with its own benefits and drawbacks. Among these, paper-based diagnostic chips are becoming increasingly common because of their speed, accuracy, convenience, and economical and environmental friendliness. These paper-based diagnostic tests have ideal point-of-care (POC) diagnostic applications, particularly in personalized healthcare. Paper-based diagnostics have emerged as innovative and low-cost solutions for diagnosing viral diseases in remote and underdeveloped regions where traditional diagnostic methods are not readily available. These tests are easy to use, require minimal equipment, and can be performed by nonspecialized personnel, making them accessible even in resource-constrained settings. In this review, we discuss recent developments in paper-based diagnostic chips, the importance of improved methods for identifying viral pathogens, drawbacks of traditional detection techniques, and challenges and prospects of paper-based diagnostic chips for the detection of viruses.

Tapered tip optical fibers for measuring ultra-small refractive index changes with record high sensitivity

Here we demonstrate an inexpensive, simple, and ultra-sensitive refractive index sensor based on a tapered tip optical fiber combined with a straightforward image analysis method. The output profile of this fiber exhibits circular fringe patterns whose intensity distribution dramatically changes even with ultra-small refractive index variations in the surrounding medium. The sensitivity of the fiber sensor is measured using different concentrations of saline solutions with a transmission setup consisting of a single wavelength light source, a cuvette, an objective lens, and a camera. By analyzing the areal changes in the center of the fringe patterns for each saline solution, we obtain an unprecedented sensitivity value of 24,160 dB/RIU (refractive index unit), which is the highest value reported so far among intensity-modulated fiber refractometers. The resolution of the sensor is calculated to be 6.9 ×10^-9. Moreover, we measure the sensitivity of the fiber tip in the backreflection mode using salt-water solutions and obtained a sensitivity value of 620 dB/RIU. This sensor is ultra-sensitive, simple, easy to fabricate, and low-cost, which makes it a promising tool for on-site measurements and point-of-care applications.

LAMP-Based Point-of-Care Biosensors for Rapid Pathogen Detection

Seeking optimized infectious pathogen detection tools is of primary importance to lessen the spread of infections, allowing prompt medical attention for the infected. Among nucleic-acid-based sensing techniques, loop-mediated isothermal amplification is a promising method, as it provides rapid, sensitive, and specific detection of microbial and viral pathogens and has enormous potential to transform current point-of-care molecular diagnostics. In this review, the advances in LAMP-based point-of-care diagnostics assays developed during the past few years for rapid and sensitive detection of infectious pathogens are outlined. The numerous detection methods of LAMP-based biosensors are discussed in an end-point and real-time manner with ideal examples. We also summarize the trends in LAMP-on-a-chip modalities, such as classical microfluidic, paper-based, and digital LAMP, with their merits and limitations. Finally, we provide our opinion on the future improvement of on-chip LAMP methods. This review serves as an overview of recent breakthroughs in the LAMP approach and their potential for use in the diagnosis of existing and emerging diseases.

Bacteriophage-Based Biosensors: A Platform for Detection of Foodborne Bacterial Pathogens from Food and Environment

Foodborne microorganisms are an important cause of human illness worldwide. Two-thirds of human foodborne diseases are caused by bacterial pathogens throughout the globe, especially in developing nations. Despite enormous developments in conventional foodborne pathogen detection methods, progress is limited by the assay complexity and a prolonged time-to-result. The specificity and sensitivity of assays for live pathogen detection may also depend on the nature of the samples being analyzed and the immunological or molecular reagents used. Bacteriophage-based biosensors offer several benefits, including specificity to their host organism, the detection of only live pathogens, and resistance to extreme environmental factors such as organic solvents, high temperatures, and a wide pH range. Phage-based biosensors are receiving increasing attention owing to their high degree of accuracy, specificity, and reduced assay times. These characteristics, coupled with their abundant supply, make phages a novel bio-recognition molecule in assay development, including biosensors for the detection of foodborne bacterial pathogens to ensure food safety. This review provides comprehensive information about the different types of phage-based biosensor platforms, such as magnetoelastic sensors, quartz crystal microbalance, and electrochemical and surface plasmon resonance for the detection of several foodborne bacterial pathogens from various representative food matrices and environmental samples.

Genosensors as an alternative diagnostic sensing approaches for specific detection of various certain viruses: a review of common techniques and outcomes

Viral infections are responsible for the deaths of millions of people throughout the world. Since outbreak of highly contagious and mutant viruses such as contemporary sars-cov-2 pandemic, has challenged the conventional diagnostic methods, the entity of a thoroughly sensitive, specific, rapid and inexpensive detecting technique with minimum level of false-positivity or -negativity, is desperately needed more than any time in the past decades. Biosensors as minimized devices could detect viruses in simple formats. So far, various nucleic acid, immune- and protein-based biosensors were designed and tested for recognizing the genome, antigen, or protein level of viruses, respectively; however, nucleic acid-based sensing techniques, which is the foundation of constructing genosensors, are preferred not only because of their ultra-sensitivity and applicability in the early stages of infections but also for their ability to differentiate various strains of the same virus. To date, the review articles related to genosensors are just confined to particular pathogenic diseases; In this regard, the present review covers comprehensive information of the research progress of the electrochemical, optical, and surface plasmon resonance (SPR) genosensors that applied for human viruses' diseases detection and also provides a well description of viruses' clinical importance, the conventional diagnosis approaches of viruses and their disadvantages. This review would address the limitations in the current developments as well as the future challenges involved in the successful construction of sensing approaches with the functionalized nanomaterials and also allow exploring into core-research works regarding this area.

Portable real-time colorimetric LAMP-device for rapid quantitative detection of nucleic acids in crude samples

Loop-mediated isothermal amplification is known for its high sensitivity, specificity and tolerance to inhibiting-substances. In this work, we developed a device for performing real-time colorimetric LAMP combining the accuracy of lab-based quantitative analysis with the simplicity of point-of-care testing. The device innovation lies on the use of a plastic tube anchored vertically on a hot surface while the side walls are exposed to a mini camera able to take snapshots of the colour change in real time during LAMP amplification. Competitive features are the rapid analysis (< 30 min), quantification over 9 log-units, crude sample-compatibility (saliva, tissue, swabs), low detection limit (< 5 copies/reaction), smartphone-operation, fast prototyping (3D-printing) and ability to select the dye of interest (Phenol red, HNB). The device’s clinical utility is demonstrated in cancer mutations-analysis during the detection of 0.01% of BRAF-V600E-to-wild-type molecules from tissue samples and COVID-19 testing with 97% (Ct < 36.8) and 98% (Ct < 30) sensitivity when using extracted RNA and nasopharyngeal-swabs, respectively. The device high technology-readiness-level makes it a suitable platform for performing any colorimetric LAMP assay; moreover, its simple and inexpensive fabrication holds promise for fast deployment and application in global diagnostics.

Rapid Detection of Virus Nucleic Acid via Isothermal Amplification on Plasmonic Enhanced Digitizing Biosensor

Rapid detection for infectious diseases is highly demanded in diagnosis and infection prevention. In this work, we introduced a plasmonic enhanced digitizing biosensor for the rapid detection of nucleic acids. The sensor successfully achieved the detection of loop-mediated isothermal amplification for the hepatitis virus in this work. The sensor comprised a nanodisc array and Bst polymerases conjugated on the rough surface of a nanodisc. The rough surface of the nanodisc provided plasmonic hot spots to enhance the fluorescence signal. The virus DNA was detected by conducting a modified loop-mediated isothermal amplification with fluorescence resonance energy transfer reporter conjugated primers on the sensor. The modified isothermal amplification improved the signal contrast and detection time compared to the original assay. By integrating the modified amplification assay and plasmonic enhancement sensor, we achieved rapid detection of the hepatitis virus. Nucleic acid with a concentration of 10⁻³ to 10⁻⁴ mg/mL was detected within a few minutes by our design. Our digitizing plasmonic nanoarray biosensor also showed 20–30 min earlier detection compared to conventional loop-mediated isothermal amplification sensors.

Visible transparency tuning and corresponding sensing application of opal photonic crystals

The development of optical refractive index sensors for label-free sensing is beneficial for both chemical and biochemical applications. Lots of efforts have been devoted to narrow the resonance peaks of periodic nanostructures and, therefore, improve the figures of merit. The substrates with high-quality factor resonances always come at the expense of not only complicated fabrication processes but also the requirement of sophisticated optical measuring systems. It is demonstrated in this work that Fabry-Perot resonance based broadband sensing with figure of merit of 83 can be achieved using low-cost self-assembled opal photonic crystals. It is seen by the naked eye that the transparency of photonic crystal dots can be gradually improved by increasing the refractive index of the filling liquid. The loop-mediated isothermal amplification induced refractive index variation of biological samples has also been recognized using the prepared photonic crystal dots, which are capable of fluorescence enhancement as well.

Numerical Study of Graphene/Au/SiC Waveguide-Based Surface Plasmon Resonance Sensor

A new waveguide-based surface plasmon resonance (SPR) sensor was proposed and investigated by numerical simulation. The sensor consists of a graphene cover layer, a gold (Au) thin film, and a silicon carbide (SiC) waveguide layer on a silicon dioxide/silicon (SiO₂/Si) substrate. The large bandgap energy of SiC allows the sensor to operate in the visible and near-infrared wavelength ranges, which effectively reduces the light absorption in water to improve the sensitivity. The sensor was characterized by comparing the shift of the resonance wavelength peak with change of the refractive index (RI), which mimics the change of analyte concentration in the sensing medium. The study showed that in the RI range of 1.33~1.36, the sensitivity was improved when the graphene layers were increased. With 10 graphene layers, a sensitivity of 2810 nm/RIU (refractive index unit) was achieved, corresponding to a 39.1% improvement in sensitivity compared to the Au/SiC sensor without graphene. These results demonstrate that the graphene/Au/SiC waveguide SPR sensor has a promising use in portable biosensors for chemical and biological sensing applications, such as detection of water contaminations (RI = 1.33~1.34), hepatitis B virus (HBV), and glucose (RI = 1.34~1.35), and plasma and white blood cells (RI = 1.35~1.36) for human health and disease diagnosis.

Portable Molecular Diagnostics Device for Identification of Asini Corii Colla by Loop-Mediated Isothermal Amplification

Asini Corii Colla (ACC; donkey-hide glue) is one of the most valuable tonic traditional Chinese medicines. Because of the large demand for gelatinous Chinese medicines, bovine or swine skin was sometimes used to make adulterated gelatine in recent decades. Food chemicals can greatly harm people’s health, and detecting chemicals in foods is extremely important. A loop-mediated isothermal amplification (LAMP) device with smartphone detection is demonstrated in this study for detecting the DNA of Asini Corii Colla. The complete system is composed of a hand-held box equipped with a smartphone, a cartridge heater, an ultraviolet LED, a disposable reaction tube, and a homemade thermal module. All the processes are powered by a set of rechargeable batteries. Comprehensive experiments of measuring temperature profiles are presented, which showed the accuracy of temperature under thermal control is less than 0.5 °C. By implementing one heating module with an ATmega328p-au microcontroller in the device, the DNA mixture is heated directly up to the reaction temperature within 5 min. Next, a DNA segment of Asini Corii Colla is utilized to evaluate the sensitivity of the DNA amplification in the portable device. A limit of detection to a concentration of 10−4 ng/μL is achieved. Real-time detection of Asini Corii Colla by a smartphone camera can be achieved using this portable device. The unique architecture utilized in this device is ideal for a low-cost DNA analysis system.

Recent advances in biosensors for detecting viruses in water and wastewater

As there is a considerable number of virus particles in wastewater which cause numerous infectious diseases, it is necessary to eliminate viruses from domestic wastewater before it is released in the environment. In addition, on-site detection of viruses in wastewater can provide information on possible virus exposures in the community of a given wastewater catchment. For this purpose, the pre-detection of different strains of viruses in wastewaters is an essential environmental step. Epidemiological studies illustrate that viruses are the most challenging pathogens to be detected in water samples because of their nano sizes, discrete distribution, and low infective doses. Over the past decades, several methods have been applied for the detection of waterborne viruses which include polymerase chain reaction-based methods (PCR), enzyme-linked immunosorbent assay (ELISA), and nucleic acid sequence-based amplification (NASBA). Although they have shown acceptable performance in virus measurements, their drawbacks such as complicated and time-consuming procedures, low sensitivity, and high analytical cost call for alternatives. Although biosensors are still in an early stage for practical applications, they have shown great potential to become an alternative means for virus detection in water and wastewater. This comprehensive review addresses the different types of viruses found in water and the recent development of biosensors for detecting waterborne viruses.

Detection of Streptococcus equi subsp. equi in guttural pouch lavage samples using a loop-mediated isothermal nucleic acid amplification microfluidic device

Background

Rapid point‐of‐care (POC) detection of Streptococcus equi subsp. equi (S. equi) would theoretically reduce the spread of strangles by identifying index and carrier horses.

Hypothesis

That the eqbE isothermal amplification (LAMP) assay, and the same eqbE LAMP assay tested in a microfluidic device format, are comparable to a triplex real‐time quantitative polymerase chain reaction (qPCR) assay that is commonly used in diagnostic labs.

Samples

Sixty‐eight guttural pouch lavage (GPL) specimens from horses recovering from strangles.

Methods

Guttural pouch lavage specimens were tested for S. equi retrospectively using the benchtop eqbE LAMP, the eqbE LAMP microfluidic device, and compared to the triplex qPCR, that detects 2 S. equi‐specific genes, eqbE and SEQ2190, as the reference standard using the receiver operating characteristic area under the curve (ROC).

Results

The 27/68 specimens were positive by benchtop eqbE LAMP, 31/64 by eqbE LAMP microfluidic device, and 12/67 by triplex qPCR. Using the triplex PCR as the reference, the benchtop eqbE LAMP showed excellent discrimination (ROC Area = 0.813, 95% confidence interval [CI] = 0.711‐0.915) as did the LAMP microfluidic device (ROC Area = 0.811, 95% CI = 0.529‐0.782). There was no significant difference between the benchtop LAMP and LAMP microfluidic device (ROC Area 0.813 ± 0.055 vs 0.811 ± 0.034, P = .97).

Conclusions

The eqbE LAMP microfluidic device detected S. equi in GPL specimens from convalescent horses. This assay shows potential for development as a POC device for rapid, sensitive, accurate, and cost‐efficient detection of S. equi.

Monitoring hepatitis B by using point-of-care testing: biomarkers, current technologies, and perspectives

Introduction: Liver diseases caused by hepatitis B virus (HBV) are pandemic infectious diseases that seriously endanger human health, conventional diagnosis methods can not meet the requirements in resource-limited areas. The point of acre detection methods can easily resolve those problems. Herein, we review the most recent advances in POC-based hepatitis B detection methods and present some recommendations for future development. It aims to provide ideas for future research.Areas covered: Epidemiological data on Hepatitis B, conventional diagnostic methods for hepatitis B detection, some latest point of care detection methods for hepatitis B detection and list out the recommendations for future development.Expert opinion: This manuscript summarized traditional biomarkers of different hepatitis B stages and recent-developed POCT platforms (including microfluidic platforms and lateral-flow strips) and discuss the challenges associated with their use. Some emerging biomarkers that can be used in hepatitis B diagnosis are also listed. This manuscript has certain guiding significance to the development of hepatitis B detection.

Recent advances in cardiac biomarkers detection: From commercial devices to emerging technologies

Although cardiac pathologies are the major cause of death in the world, it remains difficult to provide a reliable diagnosis to prevent heart attacks. Rapid patient care and management in emergencies are critical to prevent dramatic consequences. Thus, relevant biomarkers such as cardiac troponin and natriuretic peptides are currently targeted by commercialized Point-Of-Care immunoassays. Key points still to be addressed concern cost, lack of standardization, and poor specificity, which could limit the reliability of the assays. Consequently, alternatives are emerging to address these issues. New probe molecules such as aptamers or molecularly imprinted polymers should allow a reduction in cost of the assays and an increase in reproducibility. In addition, the assay specificity and reliability could be improved by enabling multiplexing through the detection of several molecular targets in a single device.

Bacteriophage Based Biosensors: Trends, Outcomes and Challenges

Foodborne pathogens are one of the main concerns in public health, which can have a serious impact on community health and health care systems. Contamination of foods by bacterial pathogens (such as Staphylococcus aureus, Streptococci, Legionella pneumophila, Escherichia coli, Campylobacter jejuni and Salmonella typhimurium) results in human infection. A typical example is the current issue with Coronavirus, which has the potential for foodborne transmission and ruling out such concerns is often difficult. Although, the possible dissemination of such viruses via the food chain has been raised. Standard bacterial detection methods require several hours or even days to obtain the results, and the delay may result in food poisoning to eventuate. Conventional biochemical and microbiological tests are expensive, complex, time-consuming and not always reliable. Therefore, there are urgent demands to develop simple, cheap, quick, sensitive, specific and reliable tests for the detection of these pathogens in foods. Recent advances in smart materials, nanomaterials and biomolecular modeling have been a quantum leap in the development of biosensors in overcoming the limitations of a conventional standard laboratory assay. This research aimed to critically review bacteriophage-based biosensors, used for the detection of foodborne pathogens, as well as their trends, outcomes and challenges are discussed. The future perspective in the use of simple and cheap biosensors is in the development of lab-on-chips, and its availability in every household to test the quality of their food.

Plasmonic-based platforms for diagnosis of infectious diseases at the point-of-care

Infectious diseases such as HIV-1/AIDS, tuberculosis (TB), hepatitis B (HBV), and malaria still exert a tremendous health burden on the developing world, requiring rapid, simple and inexpensive diagnostics for on-site diagnosis and treatment monitoring. However, traditional diagnostic methods such as nucleic acid tests (NATs) and enzyme linked immunosorbent assays (ELISA) cannot be readily implemented in point-of-care (POC) settings. Recently, plasmonic-based biosensors have emerged, offering an attractive solution to manage infectious diseases in the developing world since they can achieve rapid, real-time and label-free detection of various pathogenic biomarkers. Via the principle of plasmonic-based optical detection, a variety of biosensing technologies such as surface plasmon resonance (SPR), localized surface plasmon resonance (LSPR), colorimetric plasmonic assays, and surface enhanced Raman spectroscopy (SERS) have emerged for early diagnosis of HIV-1, TB, HBV and malaria. Similarly, plasmonic-based colorimetric assays have also been developed with the capability of multiplexing and cellphone integration, which is well suited for POC testing in the developing world. Herein, we present a comprehensive review on recent advances in surface chemistry, substrate fabrication, and microfluidic integration for the development of plasmonic-based biosensors, aiming at rapid management of infectious diseases at the POC, and thus improving global health.

Microfluidic-Based Nucleic Acid Amplification Systems in Microbiology

Rapid, sensitive, and selective bacterial detection is a hot topic, because the progress in this research area has had a broad range of applications. Novel and innovative strategies for detection and identification of bacterial nucleic acids are important for practical applications. Microfluidics is an emerging technology that only requires small amounts of liquid samples. Microfluidic devices allow for rapid advances in microbiology, enabling access to methods of amplifying nucleic acid molecules and overcoming difficulties faced by conventional. In this review, we summarize the recent progress in microfluidics-based polymerase chain reaction devices for the detection of nucleic acid biomarkers. The paper also discusses the recent development of isothermal nucleic acid amplification and droplet-based microfluidics devices. We discuss recent microfluidic techniques for sample preparation prior to the amplification process.

Gold nanoparticles and hepatitis B virus

Hepatitis B virus (HBV) infection is one of the major health issues in the world presently with high tendency of leading to hepatocarcinoma, cirrhosis and liver cancer, especially if not properly managed. It has been estimated that there are about 2 billion people with a serological profile of HBV infection, and 360 million patients worldwide living with chronic HBV-associated liver disease, hence the need to find an efficient and precise diagnosis technique to drive a robust treatment for Hepatitis B virus cannot be over emphasized. The emergence of analytical device like biosensor which combines biological and physicochemical element to detect HBV in screened samples has been very helpful in providing a timely intervention to tame this virus. This review focuses on the current state of biosensor researches with respect to various in-depth application of gold nanoparticle for the detection of HBV.

LAMP-on-a-chip: Revising microfluidic platforms for loop-mediated DNA amplification

Nucleic acid amplification for the detection of infectious diseases, food pathogens, or assessment of genetic disorders require a laboratory setting with specialized equipment and technical expertise. Isothermal deoxyribonucleic acid amplification methods, such as loop-mediated isothermal amplification (LAMP), exhibit characteristics ideal for point-of-care (POC) applications, since their instrumentation is simpler in comparison with the standard method of polymerase chain reaction. Other key advantages of LAMP are robustness and the production of pyrophosphate in the presence of the target gene, enabling to detect the reaction products using the naked eye. Polymerase inhibitors, presented in clinical samples, do not affect the amplification process, making LAMP suitable for a simple sample-to-answer diagnostic systems with simplified sample preparation. In this review, we discuss the trends in miniaturized LAMP techniques, such as microfluidic, paper-based, and digital with their advantages and disadvantages, especially for POC applications alongside our opinion of the future development of miniaturized LAMP.

•

Introduction of loop mediated isothermal amplification (LAMP) and its principle.

•

Classical microfluidics-based LAMP for DNA/RNA detection.

•

Paper-based LAMP.

•

Microfluidic-based digital LAMP.

•

Future of microfluidic LAMP development.

Multifaceted characterization of recombinant protein-based vaccines: An immunochemical toolbox for epitope-specific analyses of the hepatitis E vaccine

The integrity of functional epitopes is a critical quality attribute for recombinant protein based vaccines since the presence of these native-like epitopes is the structural basis for vaccines to elicit functional antibodies. To demonstrate the quality and quantity of functional epitopes on vaccine antigens, a toolbox of assessing antigen characteristics is essential. Among the physicochemical, biophysical, immunochemical and in vivo potency analyses, the epitope-specific assays are most critical assessment of the antigen functionality. In this study, we used hepatitis E virus vaccine as an example to illustrated how the monoclonal antibody (mAb) based immunochemical assays were established for in-depth and multifaceted antigen characterization. A large panel of mAbs were developed and characterized using epitope clustering analysis. A subset of these mAbs recognizing non-overlapping epitopes were chosen to be used for assay development. Orthogonal methods, including surface plasma resonance-based BIAcore, solution competitive ELISA and sandwich ELISA, were developed for the antigenicity assessment. The sandwich ELISA with a pair of mAbs, recognizing two different epitopes, was used to assess the accelerated antigen stability, showing enhanced stability with adjuvant adsorption. Such a sandwich ELISA with robust performance has the potentials to be used for in vitro potency analysis to replace animal-based potency assay as product release test. In summary, using hepatitis E vaccine as an example, we demonstrated the importance and establishment of a mAb-based immunochemical toolbox for multifaceted antigen characterization. This is particularly important to demonstrate the successful reconstruction of the native-like and functional epitopes on a recombinant antigen post expression and purification. These epitope-specific and multifaceted assays serve as critical tools for process monitoring or lot consistency tests in support of vaccine development and manufacturing.

Detection of Hepatitis B Virus DNA among Chronic and potential Occult HBV patients in resource-limited settings by Loop-Mediated Isothermal Amplification assay

Transmission of Hepatitis B Virus (HBV) usually occurs due to the transfusion of blood or blood products from chronic HBV (CHB) or occult HBV-infected (OBI) patients. Besides serological tests, e.g. HBsAg and anti- HBc (total), detection of HBVDNA is necessary for the diagnosis of OBI patients. Different nucleic acid tests (NATs) including real- time-Polymerase Chain Reaction (qPCR) are used to detect HBV- DNA. The NATs are expensive and require technical expertise which are barriers to introduce them in resource-limited settings. This study was undertaken to evaluate the use of Loop-Mediated Isothermal Amplification (LAMP) assay as an alternative to qPCR for the detection of HBV-DNA in CHB and potential OBI patients in resource-limited settings. Following the published protocols with some modifications, a LAMP assay was developed for detection of HBV-DNA by either using a heat block followed by detection in an agarose gel or using a qPCR thermocycler. The LAMP assay was applied to supernatant prepared from heat-treated serum collected from CHB and potential OBI patients. HBV viral load in serum was measured by qPCR using a single-step HBV-DNA quantification kit. Among 200 samples tested, qPCR was capable to detect HBV-DNA in 25.5% of cases, whereas LAMP assay detected HBV-DNA in 43.5% cases. The qPCR was able to detect 11 (9.16%) potential OBI cases, whereas LAMP assay identified HBV-DNA in 43 (35.83%) cases. In addition to tests for HBsAg and/or anti-HBc (total), detection of HBV-DNA by LAMP assay may aid in preventing post-transfusion HBV infection in resource-limited settings.

Detection of antibodies against hepatitis B virus surface antigen and hepatitis C virus core antigen in plasma with a waveguide-mode sensor

In large-scale disasters, such as huge significant earthquakes, on-site examination for blood typing and infectious disease screening will be very helpful to save lives of victims who need surgical treatment and/or blood transfusion. However, physical damage, such as building collapse, electric power failure and traffic blockage, disrupts the capacity of the medical system. Portable diagnostic devices are useful in such cases of emergency. In this study, we evaluated a waveguide-mode sensor for detection of anti-hepatitis virus antibodies. First, we examined whether we can detect antigen-antibody interaction on a sensor chip immobilized hepatitis B virus surface (HBs) antigen and hepatitis C virus (HCV) core antigen using monoclonal mouse antibodies for HBs antigen and HCV core antigen. We obtained significant changes in the reflectance spectra, which indicate specific antigen-antibody interaction for anti-HBs antibody and anti-HCV antibody. Next, we examined the effect of horseradish peroxidase-conjugated secondary antibody using aminoethyl carbazole as the peroxidase substrate and found that the colorimetric reaction increases detection sensitivity for anti-HBs antibody more than 300 times. Finally, we successfully detected anti-HBs antibody in human blood samples with an enhancing method using a peroxidase reaction. Thus, a portable device utilizing a waveguide-mode sensor may be applied to on-site blood testing in emergency settings.

Miniaturized devices for point of care molecular detection of HIV

The HIV pandemic affects 36.7 million people worldwide, predominantly in resource-poor settings. Nucleic acid-based molecular detection of HIV plays a significant role in antiretroviral treatment monitoring for HIV patients, as well as diagnosis of HIV infection in infants. Currently available molecular diagnostic methods are complex, time-consuming and relatively expensive, thus limiting their use in resource-poor settings. Recent advances in microfluidics technology have made possible low-cost integrated miniaturized devices for molecular detection and quantification of HIV at the point of care. We review recent technical advances in molecular testing of HIV using microfluidic technology, with a focus on assays based on isothermal nucleic acid amplification. Microfluidic components for sample preparation, isothermal amplification and result detection are discussed and compared. We also discuss the challenges and future directions for developing an integrated "sample-to-result" microfluidic platform for HIV molecular detection.

Advances in nanomaterials and their applications in point of care (POC) devices for the diagnosis of infectious diseases

Nanotechnology has gained much attention over the last decades, as it offers unique opportunities for the advancement of the next generation of sensing tools. Point-of-care (POC) devices for the selective detection of biomolecules using engineered nanoparticles have become a main research thrust in the diagnostic field. This review presents an overview on how the POC-associated nanotechnology, currently applied for the identification of nucleic acids, proteins and antibodies, might be further exploited for the detection of infectious pathogens: although still premature, future integrations of nanoparticles with biological markers that target specific microorganisms will enable timely therapeutic intervention against life-threatening infectious diseases.

A SPR biosensor based on signal amplification using antibody-QD conjugates for quantitative determination of multiple tumor markers

The detection of tumor markers is very important in early cancer diagnosis; however, tumor markers are usually present at very low concentrations, especially in the early stages of tumor development. Surface plasmon resonance (SPR) is widely used to detect biomolecular interactions; it has inherent advantages of being high-throughput, real-time, and label-free technique. However, its sensitivity needs essential improvement for practical applications. In this study, we developed a signal amplification strategy using antibody-quantum dot (QD) conjugates for the sensitive and quantitative detection of α-fetoprotein (AFP), carcinoembryonic antigen (CEA) and cytokeratin fragment 21-1 (CYFRA 21-1) in clinical samples. The use of a dual signal amplification strategy using AuNP-antibody and antibody-QD conjugates increased the signal amplification by 50-folds. The constructed SPR biosensor showed a detection limit as low as 0.1 ng/mL for AFP, CEA, and CYFRA 21-1. Moreover, the results obtained using this SPR biosensor were consistent with those obtained using the electrochemiluminescence method. Thus, the constructed SPR biosensor provides a highly sensitive and specific approach for the detection of tumor markers. This SPR biosensor can be expected to be readily applied for the detection of other tumor markers and can offer a potentially powerful solution for tumor screening.

An enzyme-free surface plasmon resonance biosensing strategy for detection of DNA and small molecule based on nonlinear hybridization chain reaction

A label-free and enzyme-free surface plasmon resonance (SPR) biosensing strategy has been developed for highly sensitive and specific detection of target DNA by employing the nonlinear hybridization chain reaction (HCR) amplification. Nonlinear HCR is a hairpin-free system in which double-stranded DNA monomers could dendritically assemble into highly branched nanostructure upon introducing a trigger sequence. The target DNA partly hybridizes with capture probe on the gold sensing chip and the unpaired fragment of target DNA works as a trigger to initiate the nonlinear HCR, forming a chain-branching growth of DNA dendrimer by self-assembly. Real-time amplified SPR response is observed upon the introduction of nonlinear HCR system. The method is capable of detecting target DNA at the concentration down to 0.85 pM in 60min with a dynamic range from 1 pM to 1000 pM, and could discriminate target DNA from mismatched sequences. This biosensing strategy exhibits good reproducibility and precision, and has been successfully applied for detection of target DNA in complex sample matrices. In addition, the nonlinear HCR based SPR biosensing methodology is extended to the detection of adenosine triphosphate (ATP) by aptamer recognition. Thus, the versatile method might become a potential alternative tool for biomolecule detection in medical research and early clinical diagnosis.

An upconversion fluorescent resonant energy transfer biosensor for hepatitis B virus (HBV) DNA hybridization detection

A novel fluorescent resonant energy transfer (FRET) biosensor was fabricated for the detection of hepatitis B virus (HBV) DNA using poly(ethylenimine) (PEI) modified upconversion nanoparticles (NH2-UCNPs) as energy donor and gold nanoparticles (Au NPs) as acceptor. The PEI modified upconversion nanoparticles were prepared directly with a simple one-pot hydrothermal method, which provides high quality amino-group functionalized UCNPs with uniform morphology and strong upconversion luminescence. Two single-stranded DNA strands, which were partially complementary to each other, were then conjugated with NH2-UCNPs and Au NPs. When DNA conjugated NH2-UCNPs and Au NPs are mixed together, the hybridization between complementary DNA sequences on UCNPs and Au NPs will lead to the quenching of the upconversion luminescence due to the FRET process. Meanwhile, upon the addition of target DNA, Au NPs will leave the surface of the UCNPs and the upconversion luminescence can be restored because of the formation of the more stable double-stranded DNA on the UCNPs. The sensor we fabricated here for target DNA detection shows good sensitivity and high selectivity, which has the potential for clinical applications in the analysis of HBV and other DNA sequences.

Hepatitis B plasmonic biosensor for the analysis of clinical serum samples

A plasmonic biosensor for rapid detection of protein biomarkers in complex media is reported. Clinical serum samples were analyzed by using a novel biointerface architecture based on poly[(N-(2-hydroxypropyl) methacrylamide)-co-(carboxybetaine methacrylamide)] brushes functionalized with bioreceptors. This biointerface provided an excellent resistance to fouling even after the functionalization and allowed for the first time the direct detection of antibodies against hepatitis B surface antigen (anti-HBs) in clinical serum samples using surface plasmon resonance (SPR). The fabricated SPR biosensor allowed discrimination of anti-HBs positive and negative clinical samples in 10min. Results are validated by enzyme-linked immunoassays of the sera in a certified laboratory. The sensor could be regenerated by simple treatment with glycine buffer.

Emerging Loop-Mediated Isothermal Amplification-Based Microchip and Microdevice Technologies for Nucleic Acid Detection

Rapid, sensitive, and selective pathogen detection is of paramount importance in infectious disease diagnosis and treatment monitoring. Currently available diagnostic assays based on polymerase chain reaction (PCR) and enzyme-linked immunosorbent assay (ELISA) are time-consuming, complex, and relatively expensive, thus limiting their utility in resource-limited settings. Loop-mediated isothermal amplification (LAMP) technique has been used extensively in the development of rapid and sensitive diagnostic assays for pathogen detection and nucleic acid analysis and hold great promise for revolutionizing point-of-care molecular diagnostics. Here, we review novel LAMP-based lab-on-a-chip (LOC) diagnostic assays developed for pathogen detection over the past several years. We review various LOC platforms based on their design strategies for pathogen detection and discuss LAMP-based platforms still in development and already in the commercial pipeline. This review is intended as a guide to the use of LAMP techniques in LOC platforms for molecular diagnostics and genomic amplifications.

Rapid and quantitative detection of hepatitis B virus

Despite availability of a universal vaccine, hepatitis B virus (HBV) infection has a huge impact on public health worldwide. Accurate and timely diagnosis of HBV infection is needed. Rapid developments have been made in the diagnostic and monitoring methods for HBV infection, including serological and molecular assays. In clinical practice, qualitative hepatitis B surface antigen (HBsAg) testing has long served as a diagnostic marker for individuals infected with HBV. More recently, HBsAg level has been used to predict treatment outcome when determined early during treatment or at baseline. However, identification of HBV DNA positive cases that do not have detectable HBsAg has encouraged the application of molecular tests. Hence, combination of quantitative detection of HBV DNA and HBsAg can be used to discriminate patients during the course of HBV infection and to monitor therapy. This article reviews the most commonly used quantitative methods for HBsAg and HBV DNA.

Metallic tip enhanced fluorescence for DNA replication monitoring

We have successfully performed localized loop-mediated isothermal reactions of hepatitis B virus (HBV) and hepatitis C virus (HCV) on the apex (50~100 nm) of metallic tips coated with Bst polymerases. The SYBR green molecules binding to the new formed HBV DNA inside the optical near fields were excited by two-photon fluorescence microscopy, and directly imaged in far field. Another reporter primer is used for HCV replication detection. Preliminary results are presented in this manuscript.

Tip-enhanced fluorescence with radially polarized illumination for monitoring loop-mediated isothermal amplification on hepatitis C virus cDNA

A tip nanobiosensor for monitoring DNA replication was presented. The effects of excitation power and polarization on tip-enhanced fluorescence (TEF) were assessed with the tip immersed in fluorescein isothiocyanate solution first. The photon count rose on average fivefold with radially polarized illumination at 50 mW. We then used polymerase-functionalized tips for monitoring loop-mediated isothermal amplification on Hepatitis C virus cDNA. The amplicon-SYBR® Green I complex was detected and compared to real-time loop-mediated isothermal amplification. The signals of the reaction using 4 and 0.004 ng∕μl templates were detected 10 and 30 min earlier, respectively. The results showed the potential of TEF in developing a nanobiosensor for real-time DNA amplification.

Recent advances in micro/nanotechnologies for global control of hepatitis B infection

The control of hepatitis B virus (HBV) infection is a challenging task, specifically in developing countries there is limited access to diagnostics and antiviral treatment mainly due to high costs and insufficient healthcare infrastructure. Although the current diagnostic technologies can reliably detect HBV, they are relatively laborious, impractical and require expensive resources that are not suitable for resource-limited settings. Advances in micro/nanotechnology are pioneering the development of new generation methodologies in diagnosis and screening of HBV. Owing to combination of nanomaterials (metal/inorganic nanoparticles, carbon nanotubes, etc.) with microfabrication technologies, utilization of miniaturized sensors detecting HBV and other viruses from ultra-low volume of blood, serum and plasma is realized. The state-of-the-art microfluidic devices with integrated nanotechnologies potentially allow for inexpensive HBV screening at low cost. This review aims to highlight recent advances in nanotechnology and microfabrication processes that are employed for developing point-of-care (POC) HBV assays.