DNAzyme-functionalized Pt nanoparticles/carbon nanotubes for amplified sandwich electrochemical DNA analysis

Immunosensor with Enhanced Electrochemiluminescence Signal Using Platinum Nanoparticles Confined within Nanochannels for Highly Sensitive Detection of Carcinoembryonic Antigen

Rapid, highly sensitive, and accurate detection of tumor biomarkers in serum is of great significance in cancer screening, early diagnosis, and postoperative monitoring. In this study, an electrochemiluminescence (ECL) immunosensing platform was constructed by enhancing the ECL signal through in situ growth of platinum nanoparticles (PtNPs) in a nanochannel array, which can achieve highly sensitive detection of the tumor marker carcinoembryonic antigen (CEA). An inexpensive and readily available indium tin oxide (ITO) glass electrode was used as the supporting electrode, and a layer of amino-functionalized vertically ordered mesoporous silica film (NH2-VMSF) was grown on its surface using an electrochemically assisted self-assembly method (EASA). The amino groups within the nanochannels served as anchoring sites for the one-step electrodeposition of PtNPs, taking advantage of the confinement effect of the ultrasmall nanochannels. After the amino groups on the outer surface of NH2-VMSF were derivatized with aldehyde groups, specific recognition antibodies were covalently immobilized followed by blocking nonspecific binding sites to create an immunorecognition interface. The PtNPs, acting as nanocatalysts, catalyzed the generation of reactive oxygen species (ROS) with hydrogen peroxide (H2O2), significantly enhancing the ECL signal of the luminol. The ECL signal exhibited high stability during continuous electrochemical scanning. When the CEA specifically bound to the immunorecognition interface, the resulting immune complexes restricted the diffusion of the ECL emitters and co-reactants towards the electrode, leading to a reduction in the ECL signal. Based on this immune recognition-induced signal-gating effect, the immunosensor enabled ECL detection of CEA with a linear range of 0.1 pg mL-1 to 1000 ng mL-1 with a low limit of detection (LOD, 0.03 pg mL-1). The constructed immunosensor demonstrated excellent selectivity and can achieve CEA detection in serum.

Overcoming Major Barriers to Developing Successful Sensors for Practical Applications Using Functional Nucleic Acids

For many years, numerous efforts have been focused on the development of sensitive, selective, and practical sensors for environmental monitoring, food safety, and medical diagnostic applications. However, the transition from innovative research to commercial success is relatively sparse. In this review, we identify four scientific barriers and one technical barrier to developing successful sensors for practical applications, including the lack of general methods to (a) generate receptors for a wide range of targets, (b) improve sensor selectivity to overcome interferences, (c) transduce the selective binding to different optical, electrochemical, and other signals, and (d) tune dynamic range to match thresholds of detection required for different targets; and the costly development of a new device. We then summarize solutions to overcome these barriers using sensors based on functional nucleic acids that include DNAzymes, aptamers, and aptazymes and how these sensors are coupled to widely available measurement devices to expand their capabilities and lower the barrier for their practical applications in the field and point-of-care settings.

Fabrication of Carboxylated Carbon Nanotube Buckypaper Composite Films for Bovine Serum Albumin Detection

The salient point of this study is to fabricate carbon nanotube (CNT) buckypaper composite films prepared through the methods of pumping filtration and spin coating. Firstly, carboxylated CNTs were used to make the original buckypaper specimen and further modify the buckypaper surface by incorporating different surface modifiers. Then, all of original (unmodified) and modified buckypaper composite films had different concentrations of bovine serum albumin (BSA) added, and differential pulse voltammetry (DPV) electrochemical measurement was used to measure the characteristics of the various buckypaper composite films, after adding different concentrations of BSA. The experimental results show that the contact angles for four modified specimens are smaller than that of the original unmodified S–BP specimen (62°). These results indicate that the four modifiers used in this study can improve the hydrophilic properties of the original, unmodified S–BP specimen, and benefit the subsequent bonding of a modified specimen with aqueous BSA. In addition to the improvement of the hydrophilic properties of the modified specimen, which affects the bonding with BSA, the bonding type produced by the modifier also plays an essential role in the bonding between specimen and BSA. Therefore, the S–BP–EDC/NHS and S–BP–TA specimens have better linear dependence between log (BSA concentration) and oxidation current data.

Inorganic nanoparticles coupled to nucleic acid enzymes as analytical signal amplification tools

Nucleic acid enzymes (NAzymes) are a class of nucleic acid molecules with catalytic activity, which can be modulated by the presence of different species such as metal ions, genetic biomarkers, small molecules or proteins, among others. NAzymes offer several important advantages for development of novel bioanalytical strategies, resulting from their functionality as specific recognition elements and as amplified analytical signal generators, making them ideal candidates for developing highly specific bioanalytical strategies for the detection of a wide variety of targets. When coupled with the exceptional features of inorganic nanoparticles (NPs), the sensitivity of the assays can be significantly improved, allowing the detection of targets using many different detection techniques including visual readout, spectrophotometry, fluorimetry, electrochemiluminescence, voltammetry, and single-particle inductively coupled plasma-mass spectrometry. Here we provide an overview of the fundamentals of novel strategies developed to achieve analytical signal amplification based on the use of NAzymes coupled with inorganic NPs. Some representative examples of such strategies for the highly sensitive detection of different targets will be presented, including metal ions, proteins, DNA- or RNA-based biomarkers, and small molecules or microorganisms. Furthermore, future prospective challenges will be discussed.

Optical Fiber, Nanomaterial, and THz-Metasurface-Mediated Nano-Biosensors: A Review

The increasing use of nanomaterials and scalable, high-yield nanofabrication process are revolutionizing the development of novel biosensors. Over the past decades, researches on nanotechnology-mediated biosensing have been on the forefront due to their potential application in healthcare, pharmaceutical, cell diagnosis, drug delivery, and water and air quality monitoring. The advancement of nanoscale science relies on a better understanding of theory, manufacturing and fabrication practices, and the application specific methods. The topology and tunable properties of nanoparticles, a part of nanoscale science, can be changed by different manufacturing processes, which separate them from their bulk counterparts. In the recent past, different nanostructures, such as nanosphere, nanorods, nanofiber, core-shell nanoparticles, nanotubes, and thin films, have been exploited to enhance the detectability of labelled or label-free biological molecules with a high accuracy. Furthermore, these engineered-materials-associated transducing devices, e.g., optical waveguides and metasurface-based scattering media, widened the horizon of biosensors over a broad wavelength range from deep-ultraviolet to far-infrared. This review provides a comprehensive overview of the major scientific achievements in nano-biosensors based on optical fiber, nanomaterials and terahertz-domain metasurface-based refractometric, labelled and label-free nano-biosensors.

Sandwich-type electrochemical aptasensor based on hollow mesoporous carbon spheres loaded with porous dendritic Pd@Pt nanoparticles as signal amplifier for ultrasensitive detection of cardiac troponin I

Signal amplification is crucial to improve the sensitivity for the electrochemical detection of cardiac troponin I (cTnI), one of the ideal biomarkers for early acute myocardial infarction (AMI) diagnosis. Herein, we developed a novel signal amplification strategy to construct a sandwich-type electrochemical aptasensor for the detection of cTnI. Core-shell Pd@Pt dendritic bimetallic nanoparticles loaded on melamine modified hollow mesoporous carbon spheres (Pd@Pt DNs/NH₂-HMCS) was prepared as labels to conjugate with thiol-modification DNA aptamers probe for signal amplification. While introducing numerous amino groups, the melamine functionalized hollow mesoporous carbon spheres (NH₂-HMCS) retained the edge-plane-like defective sites for the adhesion and electrocatalytic reduction of H₂O₂. With the unique characteristics of NH₂-HMCS, it not only enhanced the dispersity and loading capacity of core-shell Pd@Pt dendritic bimetallic nanoparticles (Pd@Pt DNs), but also improved the stability of bonding by the affinity interaction between Pd@Pt DNs and amino groups of melamine. Meanwhile, the synergistic catalysis effect between Pd@Pt DNs and NH₂-HMCS significantly enhanced the electrocatalytic reduction of H₂O₂ and further amplified the signal. Under optimal conditions, this recommended aptasensor for cTnI detection displayed a wide dynamic range from 0.1 pg/mL to 100.0 ng/mL and a low detection limit of 15.4 fg/mL (S/N = 3). The sensor also successfully realized the analysis of cTnI-spiked human serum samples, meaning potential applications in AMI diagnosis.

Recent Progress of the Practical Applications of the Platinum Nanoparticle-Based Electrochemistry Biosensors

The detection of biomolecules using various biosensors with excellent sensitivity, selectivity, stability, and reproducibility, is of great significance in the analytical and biomedical fields toward achieving their practical applications. Noble metal nanoparticles are favorable candidates due to their unique optical, surface electrical effect, and catalytic properties. Among these noble metal nanoparticles, platinum nanoparticles (Pt NPs) have been widely employed for the detection of bioactive substances such as glucose, glutamic acid, and hormones. However, there is still a long way to go before the potential challenges in the practical applications of biomolecules are fully overcome. Bearing this in mind, combined with our research experience, we summarized the recent progress of the Pt NP-based biosensors and highlighted the current problems that exist in their practical applications. The current review would provide fundamental guidance for future applications using the Pt NP-based biosensors in food, agricultural, and medical fields.

Polyelectrolytes Assembly: A Powerful Tool for Electrochemical Sensing Application

The development of sensing coatings, as important sensor elements that integrate functionality, simplicity, chemical stability, and physical stability, has been shown to play a major role in electrochemical sensing system development trends. Simple and versatile assembling procedures and scalability make polyelectrolytes highly convenient for use in electrochemical sensing applications. Polyelectrolytes are mainly used in electrochemical sensor architectures for entrapping (incorporation, immobilization, etc.) various materials into sensing layers. These materials can often increase sensitivity, selectivity, and electronic communications with the electrode substrate, and they can mediate electron transfer between an analyte and transducer. Analytical performance can be significantly improved by the synergistic effect of materials (sensing material, transducer, and mediator) present in these composites. As most reported methods for the preparation of polyelectrolyte-based sensing layers are layer-by-layer and casting/coating methods, this review focuses on the use of the latter methods in the development of electrochemical sensors within the last decade. In contrast to many reviews related to electrochemical sensors that feature polyelectrolytes, this review is focused on architectures of sensing layers and the role of polyelectrolytes in the development of sensing systems. Additionally, the role of polyelectrolytes in the preparation and modification of various nanoparticles, nanoprobes, reporter probes, nanobeads, etc. that are used in electrochemical sensing systems is also reviewed.

An enzyme-free electrochemical sandwich DNA assay based on the use of hybridization chain reaction and gold nanoparticles: application to the determination of the DNA of Helicobacter pylori

An ultrasensitive enzyme-free electrochemical sandwich DNA biosensor is described for the detection of ssDNA oligonucleotides. A DNA sequence derived from the genom of Helicobacter pylori was selected as a model target DNA. The DNA assay was realized through catching target DNA on capture DNA immobilized gold electrode; then labeling the target DNA with reporter DNA (rpDNA) and initiator DNA (iDNA) co-modified gold nanoparticles (AuNPs). The high density of iDNAs serves as one of the amplification strategies. The iDNA triggers hybridization chain reaction (HCR) between two hairpins. This leads to the formation of a long dsDNA concatamer strand and represents one amplification strategy. The electrochemical probe [Ru(NH₃)₅L]²⁺, where L stands for 3-(2-phenanthren-9-ylvinyl)pyridine, intercalated into dsDNA chain. Multiple probe molecules intercalate into one dsDNA chain, serving as one amplification strategy. The electrode was subjected to differential pulse voltammetry for signal acquisition, and the oxidation peak current at -0.28 V was recorded. On each AuNP, 240 iDNA and 25 rpDNA molecules were immobilized. Successful execution of HCR at the DNA-modified AuNPs was confirmed by gel electrophoresis and hydrodynamic diameter measurements. Introduction of HCR significantly enhances the DNA detection signal intensity. The assay has two linear ranges of different slopes, one from 0.01 fM to 0.5 fM; and one from 1 fM to 100 fM. The detection limit is as low as 0.68 aM. Single mismatch DNA can be differentiated from the fully complementary DNA. Conceivably, this highly sensitive and selective assay provides a general method for detection of various kinds of DNA. Graphical abstractSchematic representation of the detection and the amplification principles of the electrochemical sandwich DNA assay. Purple curl: Captured DNA; Green curl: Reporter DNA; Orange curl: HCR initiator DNA; Yellow solid-circle: Gold nanoparticle; H1 and H2: Two hairpin DNA; [Ru(NH₃)₅L]²⁺: Signal probe.

Label-free and amplified electrogenerated chemiluminescence biosensing for the detection of thymine DNA glycosylase activity using DNA-functionalized gold nanoparticles triggered hybridization chain reaction

Effective detection of thymine DNA glycosylase (TDG) activity is extremely crucial and urgent for epigenetic research. Herein, a novel label-free electrogenerated chemiluminescence (ECL) biosensing method was developed for the detection of TDG activity using DNA-functionalized gold nanoparticles (DNA-AuNPs) triggered hybridization chain reaction (HCR). In this assay, the thiol modified hairpin probe DNA (hp-DNA) with 5' overhangs and one mismatched base pair of guanines: thymine (G: T) in the stem part was boned onto gold electrode. TDG specifically removed T base of the G: T mismatch to produce apyrimidinic (AP) sites through the N-glycosidic bond hydrolysis. The AP site was then cleaved by the catalysis of Endonuclease IV (EnIV) to generate dsDNA containing a free 3' end in the long sequence, which serves as a complementary sequence to hybridize with the specific sequence (ssDNA1) of DNA-AuNPs. Then, the functionalized DNA-AuNPs with initiator strands (ssDNA2) could trigger HCR to form nicked double helices DNA polymer which can embed numerous ECL indicator, Ru(phen)₃²⁺, resulting in significantly increased ECL signal. The proposed strategy combined the amplification function of DNA-AuNPs triggered HCR and the inherent high sensitivity of the ECL technique, a detection limit of 1.1 × 10^-5 U/μL (0.0028 ng/mL) for TDG determination was obtained. In addition, this method was successfully applied to evaluate TDG activity in cancer cell, which provides great possibility for TDG activity assay in related clinical diagnostics.

Dual-type responsive electrochemical biosensor for the detection of α2,6-sialylated glycans based on AuNRs-SA coupled with c-SWCNHs/S-PtNC nanocomposites signal amplification

In this study, a dual-type responsive electrochemical biosensor was developed for the quantitative detection of α2,6-sialylated glycans (α2,6-sial-Gs), a potential biomarker of tumors. The gold nanorods (AuNRs), which exhibited great specific surface area, as well as good biocompatibility, was synthesized by the way of seed growth method. Furthermore, a biotin-streptavidin (biotin-SA) system was introduced to improve the immunoreaction efficiency. Accordingly, a label-free biosensor was fabricated based on AuNRs-SA for the quick detection of α2,6-sial-Gs by recording the signal of differential pulse voltammetry (DPV). Furthermore, to expand the ultrasensitive detection of α2,6-sial-Gs, a carboxylated single-walled carbon nanohorns/sulfur-doped platinum nanocluster (c-SWCNHs/S-PtNC) was synthesized for the first time as a novel signal label, which showed an excellent catalytic performance. The usage of c-SWCNHs/S-PtNC could significantly amplify the electrochemical signal recorded by the amperometric i-t curve. Herein, a sandwich type biosensor was constructed by combining the AuNRs-SA on the electrode and c-SWCNHs/S-PtNC (signal amplifier). The label-free biosensor possessed a linear range from 5 ng mL^-1 to 5 μg mL^-1 with a detection limit of 0.50 ng mL^-1, and the sandwich-type biosensor possessed a wide linear range from 1 fg mL^-1 to 100 ng mL^-1 with a detection limit of 0.69 fg mL^-1. Furthermore, the biosensor exhibited excellent recovery and stability, indicating its potential for use in actual samples.

Platinum nanoparticles in nanobiomedicine

Oxidative stress-dependent inflammatory diseases represent a major concern for the population's health worldwide. Biocompatible nanomaterials with enzymatic properties could play a crucial role in the treatment of such pathologies. In this respect, platinum nanoparticles (PtNPs) are promising candidates, showing remarkable catalytic activity, able to reduce the intracellular reactive oxygen species (ROS) levels and impair the downstream pathways leading to inflammation. This review reports a critical overview of the growing evidence revealing the anti-inflammatory ability of PtNPs and their potential applications in nanomedicine. It provides a detailed description of the wide variety of synthetic methods recently developed, with particular attention to the aspects influencing biocompatibility. Special attention has been paid to the studies describing the toxicological profile of PtNPs with an attempt to draw critical conclusions. The emerging picture suggests that the material per se is not causing cytotoxicity, while other physicochemical features related to the synthesis and surface functionalization may play a crucial role in determining the observed impairment of cellular functions. The enzymatic activity of PtNPs is also summarized, analyzing their action against ROS produced by pathological conditions within the cells. In particular, we extensively discuss the potential of these properties in nanomedicine to down-regulate inflammatory pathways or to be employed as diagnostic tools with colorimetric readout. A brief overview of other biomedical applications of nanoplatinum is also presented.

Detection of Helicobacter pylori in dental plaque using a DNA biosensor for noninvasive diagnosis

H. pylori in dental plaque was detected with a DNA biosensor with results correlating well with the ¹³C urea breath test.

Cerium dioxide-doped carboxyl fullerene as novel nanoprobe and catalyst in electrochemical biosensor for amperometric detection of the CYP2C19*2 allele in human serum

The disposition dose of clopidogrel is different in CYP2C19*2 gene carriers and non-carriers. High-dose clopidogrel has been recommended to overcome a low-responsiveness to clopidogrel in patients with the CYP2C19*2 gene. To guide the choice of clopidogrel dosage and catalyse a development in the field of personalized therapy, we developed an ultrasensitive electrochemical biosensor to detect CYP2C19*2 gene. We constructed a novel assay based on cerium dioxide (CeO₂)-functionalized carboxyl fullerene (c-C₆₀) supported by Pt nanoparticles (c-C₆₀/CeO₂/PtNPs) for signal amplification. Au nanoparticles @ Fe-MIL-88NH₂ (AuNPs@Fe-MOFs) were synthesized by one-step method as the support platform to enhance the conductivity and immobilize more biotin-modified capture probe (bio-CP) through the superior affinity and specificity between streptavidin and biotin. c-C₆₀/CeO₂/PtNPs were labeled with signal probe to form the signal label. After the sandwich reaction of CYP2C19*2 gene between capture probe and the signal label, a distinguishing electrochemical signal from the catalysis of H₂O₂ by signal label would be observed. Amperometry was applied to record electrochemical signals. Under optimized conditions, the approach showed a good linear dependence between current and the logarithm of CYP2C19*2 gene concentrations in the range of 1 fM to 50nM with a low detection limit of 0.33fM (S/N = 3). The proposed method showed good specificity to target DNA compared with possible interfering substances. More importantly, the fabricated biosensor achieved accurate quantitative detection of CYP2C19*2 gene in human serum samples demonstrated by excellent correlations with standard DNA sequencing and provided a promising strategy for electrochemical biosensor detection of other gene mutations.

Graphene oxide directed in-situ deposition of electroactive silver nanoparticles and its electrochemical sensing application for DNA analysis

The development of high-performance biosensing platform is heavily dependent on the recognition property of the sensing layer and the output intensity of the signal probe. Herein, we present a simple and highly sensitive biosensing interface for DNA detection on the basis of graphene oxide nanosheets (GONs) directed in-situ deposition of silver nanoparticles (AgNPs). The fabrication process and electrochemical properties of the biosensing interface were probed by electrochemical techniques and scanning electron microscopy. The results indicate that GONs can specifically adsorb at the single-stranded DNA probe surface, and induces the deposition of highly electroactive AgNPs. Upon hybridization with complementary oligonucleotides to generate the duplex DNA on the electrode surface, the GONs with the deposited AgNPs will be liberated from the sensing interface due to the inferior affinity of GONs and duplex DNA, resulting in the reduction of the electrochemical signal. Such a strategy combines the superior recognition of GONs toward single-stranded DNA and double-stranded DNA, and the strong electrochemical response of in-situ deposited AgNPs. Under optimal conditions, the biosensor can detect target DNA over a wide range from 10 fM to 10 nM with a detection limit of 7.6 fM. Also, the developed biosensor shows outstanding discriminating ability toward oligonucleotides with different mismatching degrees.

Recent trends in carbon nanomaterial-based electrochemical sensors for biomolecules: A review

Carbon nanomaterials are advantageous for electrochemical sensors because they increase the electroactive surface area, enhance electron transfer, and promote adsorption of molecules. Carbon nanotubes (CNTs) have been incorporated into electrochemical sensors for biomolecules and strategies have included the traditional dip coating and drop casting methods, direct growth of CNTs on electrodes and the use of CNT fibers and yarns made exclusively of CNTs. Recent research has also focused on utilizing many new types of carbon nanomaterials beyond CNTs. Forms of graphene are now increasingly popular for sensors including reduced graphene oxide, carbon nanohorns, graphene nanofoams, graphene nanorods, and graphene nanoflowers. In this review, we compare different carbon nanomaterial strategies for creating electrochemical sensors for biomolecules. Analytes covered include neurotransmitters and neurochemicals, such as dopamine, ascorbic acid, and serotonin; hydrogen peroxide; proteins, such as biomarkers; and DNA. The review also addresses enzyme-based electrodes that are used to detect non-electroactive species such as glucose, alcohols, and proteins. Finally, we analyze some of the future directions for the field, pointing out gaps in fundamental understanding of electron transfer to carbon nanomaterials and the need for more practical implementation of sensors.

Carbon nanotube/polymer composite electrodes for flexible, attachable electrochemical DNA sensors

All-solution-processed, easily-made, flexible multi-walled carbon nanotube (MWCNT)/polydimethylsiloxane (PDMS)-based electrodes were fabricated and used for electrochemical DNA sensors. These electrodes could serve as a recognition layer for DNA, without any surface modification, through π-π interactions between the MWCNTs and DNA, greatly simplifying the fabrication process for DNA sensors. The electrodes were directly connected to an electrochemical analyzer in the differential pulse voltammetry (DPV) and cyclic voltammetry (CV) measurements, where methylene blue was used as a redox indicator. Since neither functional groups nor probe DNA were immobilized on the surfaces of the electrodes, the sensor can be easily regenerated by washing these electrodes with water. The limit of detection was found to be 1.3 × 10(2)pM (S/N=3), with good DNA sequence differentiation ability. Fast fabrication of a DNA sensor was also achieved by cutting and attaching the MWCNT-PDMS composite electrodes at an analyte solution-containable region. Our results pave the way for developing user-fabricated easily attached DNA sensors at low costs.

Current Trends in Nanomaterial-Based Amperometric Biosensors

The last decade has witnessed an intensive research effort in the field of electrochemical sensors, with a particular focus on the design of amperometric biosensors for diverse analytical applications. In this context, nanomaterial integration in the construction of amperometric biosensors may constitute one of the most exciting approaches. The attractive properties of nanomaterials have paved the way for the design of a wide variety of biosensors based on various electrochemical detection methods to enhance the analytical characteristics. However, most of these nanostructured materials are not explored in the design of amperometric biosensors. This review aims to provide insight into the diverse properties of nanomaterials that can be possibly explored in the construction of amperometric biosensors.

An improved G-quadruplex DNAzyme for dual-functional electrochemical biosensing of adenosines and hydrogen peroxide from cancer cells

A dual-functional electrochemical biosensor for adenosines and hydrogen peroxide from cancer cells was developed based on a traditional switchable electrochemical sensing format and ATP improved G-quadruplex DNAzyme as a biolabel.

Ultra-sensitive biosensor for K-ras gene detection using enzyme capped gold nanoparticles conjugates for signal amplification

In this study, an ultra-sensitive hairpin DNA-based electrochemical DNA biosensor for K-ras gene detection is described. Gold nanoparticles (Au-NPs) and horseradish peroxidase (HRP)-streptavidin capped Au-NPs (HAS) conjugates are used for signal amplification. Initially, hairpin DNA dually labeled with thiol at its 5' end and with biotin at its 3' end is immobilized on the surface of Au-NPs modified electrode, and the hairpin DNA is in a "closed" state; hence, the HAS conjugates are shielded from being approached by the biotin due to steric hindrance. However, in the presence of target DNA, the target DNA hybridizes with the loop structure of hairpin DNA and causes conformational change, resulting in biotin forced away from the electrode surface, thereby becoming accessible for the HAS conjugates. Thus, the HAS conjugates are linked to the electrode surface via the specific interaction between biotin and streptavidin. Electrochemical detection was performed in phosphate-buffered saline (PBS) containing tetramethylbenzidine (TMB) and H2O2. Under optimal conditions, the peak current differences (ΔI) are linear with the target DNA in the range from 0.1 fM to 1 nM with a detection limit of 0.035 fM. Furthermore, this biosensor also demonstrates its excellent specificity for single-base mismatched DNA.

Porous platinum nanotubes labeled with hemin/G-quadruplex based electrochemical aptasensor for sensitive thrombin analysis via the cascade signal amplification

For the first time, a sensitive electrochemical aptasensor for thrombin (TB) was developed by using porous platinum nanotubes (PtNTs) labeled with hemin/G-quadruplex and glucose dehydrogenase (GDH) as labels. Porous PtNTs with large surface area exhibited the peroxidase-like activity. Coupling with GDH and hemin/G-quadruplex as NADH oxidase and HRP-mimicking DNAzyme, the cascade signal amplification was achieved by the following ways: in the presence of glucose and NAD(+) in the working buffer, GDH electrocatalyzed the oxidation of glucose with the production of NADH. Then, hemin/G-quadruplex as NADH oxidase catalyzed the oxidation of NADH to in situ generate H2O2. Based on the corporate electrocatalysis of PtNTs and hemin/G-quadruplex toward H2O2, the electrochemical signal was significantly amplified, allowing the detection limit of TB down to 0.15 pM level. Moreover, the proposed strategy was simple because the intercalated hemin offered the readout signal, avoiding the adding of additional redox mediator as signal donator. Such an electrochemical aptasensor is highly promising for sensitive detection of other proteins in clinical diagnostics.

A label-free electrochemistry biosensor based flower-like 3-dimensional ZnO superstructures for detection of DNA arrays

A highly sensitive electrochemical DNA sensor was constructed by homogenously distributing Au nanoparticles (AuNPs) on a flower-like 3D ZnO superstructure–chitosan (CS) matrix.

Fabrication of 2D ordered mesoporous carbon nitride and its use as electrochemical sensing platform for H2O2, nitrobenzene, and NADH detection

Two-dimensional ordered mesoporous carbon nitride (OMCN) has been successfully prepared for the first time using SBA-15 mesoporous silica and melamine as template and precursor respectively, by a nano hard-templating approach. A series of OMCN-x samples with different pyrolysis temperatures have been reported. The formation of these composite materials was verified by detailed characterization (e.g., Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, N2 adsorption, X-ray diffraction, scanning electron microscopy, and transmission electron microscopy). The results showed that the materials were structurally well ordered with two-dimensional porous structure, high surface area and large pore volume. The influence of BET surface area and different amounts of N-bonding configurations formed at different pyrolysis temperatures of OMCN-x for the electrocatalysis towards hydrogen peroxide, nitrobenzene, and nicotinamide adenine dinucleotide were investigated in detail. Results indicated that OMCN treated at 800°C with largest BET surface area and highest amounts of pyrindinic N showed improved electrocatalytic activity for H2O2, nitrobenzene, and NADH in neutral solution.

Target-induced self-assembly of DNA nanomachine on magnetic particle for multi-amplified biosensing of nucleic acid, protein, and cancer cell

A biosensing system is established for the multi-amplified detection of DNA or specific substrates of aptamers under isothermal conditions, which combines nicked rolling circle amplification (N-RCA) and beacon assisted amplification (BAA) with sensitive colorimetric technique by using DNAzymes as reporter units. According to the configuration, the analysis of DNA is accomplished by recognizing the target to capture nucleic acid-functionalized magnetic particles, followed by the self-assembly of the other two nucleic acids into multicomponent DNA supramolecular structure on magnetic particles. After magnetic separation, the circularization with ligase and the fragmentation with polymerase activate N-RCA and BAA in the presence of polymerase, dNTPs, and the nicking endonuclease, successively producing horseradish peroxidase (HRP)-mimicking DNAzymes that act as colorimetric reporter to catalyze the oxidation of ABTS(2-) by H2O2 in the presence of hemin. Under the optimized conditions, we obtain a wide dynamic range for DNA analysis over 6 orders of magnitude from 1.0 × 10(-14) to 1.0 × 10(-9)M with a low limit of detection of 6.8 × 10(-15)M. In the absence of a target, neither self-assembly of nucleic acids nor amplification process can be initiated, indicating an excellent selectivity of the proposed strategy. Similarly, an analogous system is activated by cancer cells or lysozyme through cooperative self-assembly of nucleic acids on magnetic particles in the presence of respective substrates of aptamers to synthesize HRP-mimicking DNAzymes that give the readout signal for the recognition events, achieving LODs of 81 Ramos cells and 7.2 × 10(-15)M lysozyme, respectively.

DNAzyme-based magneto-controlled electronic switch for picomolar detection of lead (II) coupling with DNA-based hybridization chain reaction

A novel magneto-controlled electrochemical DNA biosensor is designed for the ultrasensitive detection of lead coupling a lead-specific DNAzyme with DNA-based hybridization chain reaction (HCR). To construct such a magnetic lead sensor, DNAzyme-based molecular beacons, selective to cleavage in the presence of Pb(2+), are initially immobilized onto magnetic beads, which were used as the recognition elements. Upon addition of target lead, catalytic cleavage of substrate DNA segments in the double-stranded DNAzymes results in the capture of the initiator strands via the conjugated catalytic strands on magnetic beads. The captured DNA initiator strands trigger the hybridization chain reaction between two alternating hairpin DNA structures labeled with ferrocene to form a nicked double-helix on the magnetic beads. Numerous ferrocene molecules are formed on the neighboring probes, each of which produces an electrochemical signal within the applied potential. Under optimal conditions, the electrochemical signal of the magnetic lead sensor increases with the increasing lead level in the sample, and exhibits a linear response over a Pb(2+) concentration range of 0.1-75 nM with a detection limit of 37 pM. Quantitative measurement of Pb(2+) in the complex sample demonstrates the selectivity of the sensor scheme and points favorably to the application of such technologies to the analysis of environmental samples. The unique combination of a DNAzyme with hybridization chain reaction makes it possible to change the DNAzyme to select for other compounds of interest. This work represents the initial steps toward the creation of a robust field sensor for lead in groundwater or drinking water.