Femtomole level photoelectrochemical aptasensing for mercury ions using quercetin-copper(II) complex as the DNA intercalator

Carbon-based photoelectrochemical sensors: recent developments and future prospects

Owing to the considerable potential of photoelectrochemical (PEC) sensors, they have gained significant attention in the analysis of biological, environmental, and food markers. However, the limited charge mass transfer efficiency and rapid recombination of electron hole pairs have become obstacles in the development of PEC sensors. In this case, considering the unique advantages of carbon-based materials, they can be used as photosensitizers, supporting materials and conductive substrates and coupled with semiconductors to prepare composite materials, solving the above problems. In addition, there are many types of carbon materials, which can have semiconductor properties and form heterojunctions after coupling with semiconductors, effectively promoting the separation of electron hole pairs. Herein, we aimed to provide a comprehensive analysis of reports on carbon-based PEC sensors by introducing their research and application status and discussing future development trends in this field. In particular, the types and performance improvement strategies of carbon-based electrodes and the working principles of carbon-based PEC sensors are explained. Furthermore, the applications of carbon-based photoelectric sensors in environmental monitoring, biomedicine, and food detection are highlighted. Finally, the current limitations in the research on carbon-based PEC sensors are emphasized and the need to enhance the sensitivity and selectivity through material modification, structural design, improved device performance, and other strategies are emphasized.

Nanomaterials-based aptasensors: An efficient detection tool for heavy-metal and metalloid ions in environmental and biological samples

In light of potential risks of heavy metal exposure, diverse aptasensors have been developed through the combination of aptamers with nanomaterials for the timely and efficient detection of metals in environmental and biological matrices. Aptamer-based sensors can benefit from multiple merits such as heightened sensitivity, facile production, uncomplicated operation, exceptional specificity, enhanced stability, low immunogenicity, and cost-effectiveness. This review highlights the detection capabilities of nanomaterial-based aptasensors for heavy-metal and metalloid ions based on their performance in terms of the basic quality assurance parameters (e.g., limit of detection, linear dynamic range, and response time). Out of covered studies, dendrimer/CdTe@CdS QDs-based ECL aptasensor was found as the most sensitive option with an LOD of 2.0 aM (atto-molar: 10-18 M) detection for Hg2+. The existing challenges in the nanomaterial-based aptasensors and their scientific solutions are also discussed.

Application of Nanomaterial Modified Aptamer-Based Electrochemical Sensor in Detection of Heavy Metal Ions

Heavy metal pollution resulting from significant heavy metal waste discharge is increasingly serious. Traditional methods for the detection of heavy metal ions have high requirements on external conditions, so developing a sensitive, simple, and reproducible detection method is becoming an urgent need. The aptamer, as a new kind of artificial probe, has received more attention in recent years for its high sensitivity, easy acquisition, wide target range, and wide use in the detection of various harmful substances. The detection platform that an aptamer-based electrochemical biosensor (E-apt sensor) provides is a new approach for the detection of heavy metal ions. Nanomaterials are particularly important in the construction of E-apt sensors, as they can be used as aptamer carriers or sensitizers to stimulate or inhibit electrochemical signals, thus significantly improving the detection sensitivity. This review summarizes the application of different types of nanomaterials in E-apt sensors. The construction methods and research progress of the E-apt sensor based on different working principles are systematically introduced. Moreover, the advantages and challenges of the E-apt sensor in heavy metal ion detection are summarized.

Quantum dots based sensitive nanosensors for detection of antibiotics in natural products: A review

Residual antibiotics in food products originated from administration of the antibiotics to animals may be accumulated through food metabolism in the human body and endanger safety and health. Thus, developing a prompt and accurate way for detection of antibiotics is a crucial issue. The zero-dimensional fluorescent probes including metals based, carbon and graphene quantum dots (QDs), are highly sensitive materials to use for the detection of a wide range of antibiotics in natural products. These QDs demonstrate unique optical properties like tunable photoluminescence (PL) and excitation-wavelength dependent emission. This study investigates the trends related to carbon and metal based QDs preparation and modification, and their diverse detection application. We discuss the performance of QDs based sensors application in various detection systems such as photoluminescence, photoelectrochemical, chemiluminescence, electrochemiluminescence, colorimetric, as well as describing their working principles in several samples. The detecting mechanism of a QDs-based sensor is dependent on its properties and specific interactions with particular antibiotics. This review also tries to describe environmental application and future perspective of QDs for antibiotics detection.

Sensing Layer for Ni Detection in Water Created by Immobilization of Bioengineered Flagellar Nanotubes on Gold Surfaces

The environmental monitoring of Ni is targeted at a threshold limit value of 0.34 μM, as set by the World Health Organization. This sensitivity target can usually only be met by time-consuming and expensive laboratory measurements. There is a need for inexpensive, field-applicable methods, even if they are only used for signaling the necessity of a more accurate laboratory investigation. In this work, bioengineered, protein-based sensing layers were developed for Ni detection in water. Two bacterial Ni-binding flagellin variants were fabricated using genetic engineering, and their applicability as Ni-sensitive biochip coatings was tested. Nanotubes of mutant flagellins were built by in vitro polymerization. A large surface density of the nanotubes on the sensor surface was achieved by covalent immobilization chemistry based on a dithiobis(succimidyl propionate) cross-linking method. The formation and density of the sensing layer was monitored and verified by spectroscopic ellipsometry and atomic force microscopy. Cyclic voltammetry (CV) measurements revealed a Ni sensitivity below 1 μM. It was also shown that, even after two months of storage, the used sensors can be regenerated and reused by rinsing in a 10 mM solution of ethylenediaminetetraacetic acid at room temperature.

Synergetic Ag2S and ZnS quantum dots as the sensitizer and recognition probe: A visible light-driven photoelectrochemical sensor for the "signal-on" analysis of mercury (II)

A visible-light-driven photoelectrochemical (PEC) sensor has been developed for the "signal-on" analysis of Hg²⁺ by the synergetic combination of low-bandgap Ag₂S and wide-bandgap ZnS quantum dots (QDs). Ag₂S QDs were synthesized with bead-chain-like structure by the self-assembly route and further covalently bound with ZnS QDs to be coated onto the indium tin oxide (ITO) electrodes. It was discovered that the ZnS@Ag₂S-modified electrodes could display the visible-light-driven PEC behavior, of which Ag₂S and ZnS QDs could act as the PEC sensitizer and Hg²⁺-recognition probe, respectively. More importantly, the photocurrent responses of the developed electrodes could be specifically turned on in the presence of Hg²⁺ under the visible-light irradiation, presumably due to that Hg²⁺ might conduct a Zn-to-Hg exchange on ZnS QDs to trigger the formation of HgS/ZnS@Ag₂S heterojunction towards the enhanced electron-hole separation. The as-prepared PEC sensor could facilitate the detection of Hg²⁺ with concentrations ranging from 0.010-1000 nM, with a detection limit of about 1.0 pM. Besides, the feasibility of practical applications of the developed PEC analysis strategy was verified by probing Hg²⁺ in environmental water samples. Such a visible-light-driven PEC detection platform with the unique "turn-on" signal output may promise for the extensive applications for Hg²⁺ evaluation.

A low-cost paper-based aptasensor for simultaneous trace-level monitoring of mercury (II) and silver (I) ions

Mercury (Hg²⁺) and silver (Ag⁺) ions possess the harmful effects on public health and environment that makes it essential to develop the sensing techniques with great sensitivity for the ions. Metal ions commonly coexist in the different biological and environmental systems. Hence, it is an urgent demand to design a simple method for the simultaneous detection of metal ions, peculiarly in the case of coexisting Hg²⁺ and Ag⁺. This study introduces a low-cost paper-based aptasensor to monitor Hg²⁺ and Ag⁺, simultaneously. The strategy of the sensing array is according to the conformational changes of Hg²⁺- and Ag⁺-specific aptamers and their release from the GO surface after the injection of the target sample on the sensing platform. Through monitoring the fluorescence recovery changes against the concentrations of the ions, Hg²⁺ and Ag⁺ can be determined as low as 1.33 and 1.01 pM. The paper-based aptasensor can simultaneously detect the ions within about 10 min. The aptasensor is applied prosperously to monitor Hg²⁺ and Ag⁺ in human serum, water, and milk. The designed aptasensor with the main advantages of simplicity and feasibility holds the supreme potential to develop a cost-effective sensing method for environmental monitoring, food control, and human diagnostics.

Application of Electrochemical Aptasensors toward Clinical Diagnostics, Food, and Environmental Monitoring: Review

Aptamers are synthetic bio-receptors of deoxyribonucleic acid (DNA) or ribonucleic acid (RNA) origin selected by the systematic evolution of ligands (SELEX) process that bind a broad range of target analytes with high affinity and specificity. So far, electrochemical biosensors have come up as a simple and sensitive method to utilize aptamers as a bio-recognition element. Numerous aptamer based sensors have been developed for clinical diagnostics, food, and environmental monitoring and several other applications are under development. Aptasensors are capable of extending the limits of current analytical techniques in clinical diagnostics, food, and environmental sample analysis. However, the potential applications of aptamer based electrochemical biosensors are unlimited; current applications are observed in the areas of food toxins, clinical biomarkers, and pesticide detection. This review attempts to enumerate the most representative examples of research progress in aptamer based electrochemical biosensing principles that have been developed in recent years. Additionally, this account will discuss various current developments on aptamer-based sensors toward heavy metal detection, for various cardiac biomarkers, antibiotics detection, and also on how the aptamers can be deployed to couple with antibody-based assays as a hybrid sensing platform. Aptamers can be used in various applications, however, this account will focus on the recent advancements made toward food, environmental, and clinical diagnostic application. This review paper compares various electrochemical aptamer based sensor detection strategies that have been applied so far and used as a state of the art. As illustrated in the literature, aptamers have been utilized extensively for environmental, cancer biomarker, biomedical application, and antibiotic detection and thus have been extensively discussed in this article.

Photoelectrochemical aptasensor for lead(II) by exploiting the CdS nanoparticle-assisted photoactivity of TiO2 nanoparticles and by using the quercetin-copper(II) complex as the DNA intercalator

A photoelectrochemical (PEC) aptasensor for Pb(II) detection is described. A nanocomposite consisting of CdS (2.5 μm) and TiO₂ nanoparticles (10 nm) was used as a photoactive material, and gold nanochains (Au NCs) as the support for immobilization of the Pb(II)-binding aptamer. The quercetin-copper(II) complex was further employed as the intercalator for the improvement of the photoactivity by embedding it into dsDNA. In the presence of Pb(II), a Pb(II)-stabilized G-quadruplex was formed between Pb(II) and DNA S1. This is accompanied by unwinding of the dsDNA and the release of the quercetin-copper(II) complex from the surface of the sensor. This results in a decrease of the photocurrent that drops linearly from 5.0 × 10^-12 to 1.0 × 10^-8 mol·L^-1 Pb(II) concentration range with a detection limit of 1.6 × 10^-12 mol·L^-1. The method was applied to the determination of Pb(II) in various samples and gave satisfactory results. Graphical abstractA photoelectrochemical aptasensor was fabricated for the detection of Pb(II) based on CdS-TiO₂ nanocomposite modified indium tin oxide (ITO) electrode. Gold nanochains (AuNCs) were used as anchor to immobilize the aptamers S1 and S2 that form a double helix structure by DNA hybridization. After embedding of quercetin-copper(II) complex as intercalator and electron donor, the concentrations of Pb(II) were determined by the changes of photocurrents.

Recent developments of photoelectrochemical biosensors for food analysis

Recent developments of photoelectrochemical biosensors for food analysis are summarized and the future prospects in this field are discussed.

Electrochemical mercury biosensors based on advanced nanomaterials

This review presents an overview of the synthesis strategies and electrochemical performance of recently developed nanomaterials for the Hg²⁺ assay.

Electrochemical aptamer-based sensors for food and water analysis: A review

Global food and water safety issues have prompted the development of highly sensitive, specific, and fast analytical techniques for food and water analysis. The electrochemical aptamer-based detection platform (E-aptasensor) is one of the more promising detection techniques because of its unique combination of advantages that renders these sensors ideal for detection of a wide range of target analytes. Recent research results have further demonstrated that this technique has potential for real world analysis of food and water contaminants. This review summaries the recently developed E-aptasensors for detection of analytes related to food and water safety, including bacteria, mycotoxins, algal toxins, viruses, drugs, pesticides, and metal ions. Ten different electroanalytical techniques and one opto-electroanalytical technique commonly employed with these sensors are also described. In addition to highlighting several novel sensor designs, this review also describes the strengths, limitations, and current challenges this technology faces, and future development trend.

Ultrasensitive photoelectrochemical aptasensor for lead ion detection based on sensitization effect of CdTe QDs on MoS2-CdS:Mn nanocomposites by the formation of G-quadruplex structure

An ultrasensitive photoelectrochemical (PEC) aptasensor for lead ion (Pb²⁺) detection was fabricated based on MoS₂-CdS:Mn nanocomposites and sensitization effect of CdTe quantum dots (QDs). MoS₂-CdS:Mn modified electrode was used as the PEC matrix for the immobilization of probe DNA (pDNA) labeled with CdTe QDs. Target DNA (tDNA) were hybridized with pDNA to made the QDs locate away from the electrode surface by the rod-like double helix. The detection of Pb²⁺ was based on the conformational change of the pDNA to G-quadruplex structure in the presence of Pb²⁺, which made the labeled QDs move close to the electrode surface, leading to the generation of sensitization effect and evident increase of the photocurrent intensity. The linear range was 50 fM to 100 nM with a detection limit of 16.7 fM. The recoveries of the determination of Pb²⁺ in real samples were in the range of 102.5-108.0%. This proposed PEC aptasensor provides a new sensing strategy for various heavy metal ions at ultralow levels.

Photoelectrochemical DNA Biosensor Based on Dual-Signal Amplification Strategy Integrating Inorganic-Organic Nanocomposites Sensitization with λ-Exonuclease-Assisted Target Recycling

Sensitive and accurate analysis of DNA is crucial to better understanding of DNA functions and early diagnosis of fatal disease. Herein, an enhanced photoelectrochemical (PEC) DNA biosensor was proposed based on dual-signal amplification via coupling inorganic-organic nanocomposites sensitization with λ-exonuclease (λ-Exo)-assisted target recycling. The short DNA sequence about chronic myelogenous leukemia (CML, type b3a2) was selected as target DNA (tDNA). ZnO nanoplates were deposited with CdS nanocrystals to form ZnO/CdS hetero-nanostructure, and it was used as PEC substrate for immobilizing hairpin DNA (hDNA). CdTe quantum dots (QDs) covalently linked with meso-tetra(4-carboxyphenyl)porphine (TCPP) to form CdTe/TCPP inorganic-organic nanocomposites, which were utilized as sensitization agents labeling at the terminal of probe DNA (pDNA). When the hDNA-modified sensing electrode was incubated with tDNA and λ-Exo, hDNA hybridized with tDNA, and meanwhile it could be recognized and cleaved by λ-Exo, resulting in the release of tDNA. The rest of nonhybridized hDNA would continuously hybridize with the released tDNA, cleave by λ-Exo, and set free the tDNA again. After λ-Exo-assisted tDNA recycling, more amounts of short DNA (sDNA) fragments coming from digestion of hDNA produced on the electrode and hybridized with CdTe/TCPP-labeled pDNA (pDNA-CdTe/TCPP conjugates). In this case, the sensitization of CdTe/TCPP inorganic-organic nanocomposites occurred, which evidently extend the absorption range and strengthened the absorption intensity of light energy, and accordingly the photocurrent signal significantly promoted. Through introducing the dual-signal amplification tactics, the developed PEC assay allowed a low calculated detection limit of 25.6 aM with a wide detection scope from 0.1 fM to 5 pM for sensitive and selective determination of tDNA.

Graphitic Carbon Nitride Sensitized with CdS Quantum Dots for Visible-Light-Driven Photoelectrochemical Aptasensing of Tetracycline

Graphitic carbon nitride (g-C₃N₄) is a new type of metal-free semiconducting material with promising applications in photocatalytic and photoelectrochemical (PEC) devices. In the present work, g-C₃N₄ coupled with CdS quantum dots (QDs) was synthesized and served as highly efficient photoactive species in a PEC sensor. The surface morphological analysis showed that CdS QDs with a size of ca. 4 nm were grafted on the surface of g-C₃N₄ with closely contacted interfaces. The UV-visible diffuse reflection spectra (DRS) indicated that the absorption of g-C₃N₄ in the visible region was enhanced by CdS QDs. As a result, g-C₃N₄-CdS nanocomposites demonstrated higher PEC activity as compared with either pristine g-C₃N₄ or CdS QDs. When g-C₃N₄-CdS nanocomposites were utilized as transducer and tetracycline (TET)-binding aptamer was immobilized as biorecognition element, a visible light-driven PEC aptasensing platform for TET determination was readily fabricated. The sensor showed a linear PEC response to TET in the concentration range from 10 to 250 nM with a detection limit (3S/N) of 5.3 nM. Thus, g-C₃N₄ sensitized with CdS QDs was successfully demonstrated as useful photoactive nanomaterials for developing a highly sensitive and selective PEC aptasensor.

Novel multifunctionalized peryleneteracarboxylic/amine supramolecules for electrochemical assay

In this work, a series of novel multifunctionalized peryleneteracarboxylic supramolecules were synthesized based on hydrogen bonding interactions between 3,4,9,10-perylenetetracarboxylic acid (PTCA) and amines, which possess large specific surface area, good membrane-forming properties and high stability. Importantly, an interesting phenomenon was found in that these series of supramolecules could conciliate disorderly redox peaks of PTCA and result in a pair of well-defined redox peaks, which were able to act as redox carriers for charge-generation and electron-transportion. And the probable mechanism for this phenomenon was discussed for the first time in detail through the integration of theoretical with practical research. To further reveal the advantages of these novel multifunctionalized supramolecule nanomaterials, PTCA/triethylamine (PTCA/TEA) was chosen as the best candidate for a redox carrier to participate in a "signal-on" aptasensor for thrombin (TB) detection by employing Fe₃O₄ magnetic beads (MBs) as a good enzyme mimic to catalyze the PTCA/TEA for signal amplification. As a result, a wide linear detection range of 0.0001-50 nM is acquired with a relatively low detection limit of 0.05 pM. And the proposed aptasensor exhibited good specificity and acceptable reproducibility and stability. After all, the explorations between PTCA and amines would set up a meaningful basis in seeking multifunctionalized supramolecule nanomaterials based on PTCA for extending the application of PTCA in a wider range of fields, and exploring the essential reason for the referred peculiar phenomenon for PTCA.

A label-free photoelectrochemical aptasensor for bisphenol A based on surface plasmon resonance of gold nanoparticle-sensitized ZnO nanopencils

A simple and novel photoelectrochemical (PEC) aptasensor for selective detection of bisphenol A (BPA) was developed using surface plasmon resonance of Au nanoparticles activated ZnO nanopencils. With the irradiation of simulated light, the increased photocurrent of nano-Au/ZnO than that of pure ZnO nanopencil is induced by the hot electrons from excited Au nanoparticles. The perfect selectivity is attributed to the specific binding of BPA to its aptamer. With the addition of BPA, the conformation of aptamer changed to a G-quadruplex structure, which resulted in the blockages of photogenerated electron-transfer channels. Based on the above mechanisms and the optimized conditions, the assembled PEC aptasensor was linear with the concentration of BPA in the range of 1-1000nmolL(-1) with a detection limit of 0.5nmolL(-1). The presence of the same concentration and similar structure of other organics did not interfere in the detection of BPA and the recovery was between 96.2% and 108.4%. It has been successfully applied to the detection of BPA in drinking water and liquid milk samples. This PEC aptasensor has good performances in novelty, selectivity, sensitivity and low cost, and it provides an alternative approach to the detection of BPA.

Photoelectrochemical detection of metal ions

Depending on the situation, metal ions may either play beneficial roles or be harmful to human health and ecosystems. Sensitive and accurate detection of metal ions is thus a critical issue in the field of analytical sciences and great efforts have been devoted to the development of various metal ion sensors. Photoelectrochemical (PEC) detection is an emerging technique for the bio/chemical detection of metal ions, and features a fast response, low cost and high sensitivity. Using representative examples, this review will first introduce the fundamentals and summarize recent progress in the PEC detection of metal ions. In addition, interesting strategies for the design of particular PEC metal ion sensors are discussed. Challenges and opportunities in this field are also presented.

A network signal amplification strategy of ultrasensitive photoelectrochemical immunosensing carcinoembryonic antigen based on CdSe/melamine network as label

Taking advantage of CdSe/melamine network as label and Au-TiO2 as substrate, this work developed a novel kind of signal amplification strategy for fabricating photoelectrochemical (PEC) immunoassay. The melamine, a star-shaped triamino molecule, was firstly used for readily capturing CdSe QDs and forming a CdSe/melamine network, which was formed through strong interactions between the carboxyl groups of TGA-stabilized CdSe QDs and the three amino groups of each melamine molecule. In this strategy, the primary antibody (Ab1) was immobilized onto Au-TiO2 substrate, which made the photoelectric conversion efficiency increase significantly. After the formed Ab2-CdSe/melamine network labels were captured onto the electrode surface via the specific antibody-antigen interaction, the photoelectric activity could be further enhanced via the interaction between the Au-TiO2 substrate and CdSe/melamine network. Due to this amplification of PEC signals and the special structure of the label, the fabricated PEC immunosensor was applied for sensitive and specific detection of cancer biomarker carcinoembryonic antigen (CEA), and displayed a wide linear range (0.005-1000ngmL(-1)) and low detection limit (5pgmL(-1)). In addition, the immunosensor was performed with good stability and reproducibility, and the results to analyze human serum samples were satisfactory.

Two-dimensional graphitic carbon nitride nanosheets for biosensing applications

Two-dimensional graphitic carbon nitride nanosheets (CNNSs) with planar graphene-like structure have stimulated increasingly research interest in recent years due to their unique physicochemical properties. CNNSs possess superior stability, high fluorescence quantum yield, low-toxicity, excellent biocompatibility, unique electroluminescent and photoelectrochemical properties, which make them appropriate candidates for biosensing. In this review, we first introduce the preparation and unique properties of CNNSs, with emphasis on their superior properties for biosensing. Then, recent advances of CNNSs in photoelectrochemical biosensing, electrochemiluminescence biosensing and fluorescence biosensing are highlighted. An additional attention is paid to the marriage of CNNSs and nucleic acids, which exhibits great potentials in both biosensing and intracellular imaging. Finally, current challenges and opportunities of this 2D material are outlined. Inspired by the unique properties of CNNSs and their advantages in biological applications, we expect that more attention will be drawn to this promising 2D material and extensive applications can be found in bioanalysis and diseases diagnosis.

Femtomolar sensitivity of bisphenol A photoelectrochemical aptasensor induced by visible light-driven TiO2 nanoparticle-decorated nitrogen-doped graphene

Efficient charge transfer takes place by coupling nitrogen doped graphene with TiO₂ and the charge recombination of the composites is significantly suppressed, resulting enhanced photocurrent responses than pristine TiO₂.

A sensitive and label-free photoelectrochemical aptasensor using Co-doped ZnO diluted magnetic semiconductor nanoparticles

Co-doped ZnO diluted magnetic semiconductor as a novel photoelectric beacon was first constructed for photoelectrochemical (PEC) aptasensor of acetamiprid. The fabricated PEC sensing is based on the specific binding of acetamiprid and its aptamer, which induces the decreasement of enhanced photocurrent produced by the electron donor of quercetin. Co(2+) doping has a beneficial effect in extending the band width of light absorption of ZnO into the visible region and to promote the separation of the photoinduced carriers due to the sp-d exchange interactions existing between the band electrons and the localized d electrons of Co(2+). The fabricated aptasensor was linear with the concentration of acetamiprid in the range of 0.5-800 nmolL(-1) with the detection limit of 0.18 nmolL(-1). The presence of same concentration of other conventional pesticides did not interfere in the detection of acetamiprid and the recovery is between 96.2% and 103.7%. This novel PEC aptasensor has good performances with high sensitivity, good selectivity, low cost and portable features. The strategy of Co-doped ZnO diluted magnetic semiconductor paves a new way to improve the performances of PEC aptasensor.

Functional nucleic acid-based sensors for heavy metal ion assays

Heavy metal contaminants such as lead ions (Pb(2+)), mercury ions (Hg(2+)) and silver ions (Ag(+)) can cause significant harm to humans and generate enduring bioaccumulation in ecological systems. Even though a variety of methods have been developed for Pb(2+), Hg(2+) and Ag(+) assays, most of them are usually laborious and time-consuming with poor sensitivity. Due to their unique advantages of excellent catalytic properties and high affinity for heavy metal ions, functional nucleic acids such as DNAzymes and aptamers show great promise in the development of novel sensors for heavy metal ion assays. In this review, we summarize the development of functional nucleic acid-based sensors for the detection of Pb(2+), Hg(2+) and Ag(+), and especially focus on two categories including the direct assay and the amplification-based assay. We highlight the emerging trends in the development of sensitive and selective sensors for heavy metal ion assays as well.

N-doped TiO2 based visible light activated label-free photoelectrochemical biosensor for detection of Hg(2+) through quenching of photogenerated electrons

A novel photoelectrochemical (PEC) biosensor was fabricated based on N-doped TiO2 for the detection of Hg(2+) through the quenching of photogenerated electrons. The N-doped TiO2 was synthesized by a sol-gel method with urea and tetrabutyl titanate as the N and Ti sources. Compared with the undoped TiO2, the N-doped TiO2 showed an enhanced photocurrent response under visible light (λ > 420 nm). The sensing surface was functionalized with 5'-amino-modified T-rich oligonucleotides. The photoelectrochemical biosensor bound Hg(2+) on the surface by a highly specific T-Hg(2+)-T recognition. Hg(2+) on the surface of the N-doped TiO2 film withdrew the photogenerated electrons and decreased the recorded current signal. The dynamic linear range for Hg(2+) has been determined to be as low as 2-6 μM.