Sensitive electrochemical microbial biosensor for p-nitrophenylorganophosphates based on electrode modified with cell surface-displayed organophosphorus hydrolase and ordered mesopore carbons

pH-responsive dual-emission carbon dots for the ratiometric detection of organophosphorus pesticides in Brassica chinensis and Hg2+ in water

Accurate and rapid monitoring of organophosphorus pesticides (OPs) residues is crucial for regulating food safety. Herein, dual-emission carbon dots (de-CDs) were fabricated for the ratiometric detection of OPs and Hg2+. The de-CDs exhibited two emission peaks at 678 and 485 nm when excited with visible light. Interestingly, the fluorescence at 678 nm was significantly quenched by Hg2+ mainly because of the static quenching effect, whereas that at 485 nm exhibited a slight change. More significantly, the quenched fluorescence of the de-CDs recovered remarkably after introducing omethoate, diazinon and malathion. Accordingly, the ratiometric detection of the three OPs and Hg2+ was achieved with high selectivity and robust performance. In addition, the OPs residues assay in Brassica chinensis was successfully performed with satisfactory results. This study not only provides an attractive tool for the simple and rapid assay of OPs but also offers new insights into the fabrication of multi-functional carbon dots.

Competitive Assay for the Ultrasensitive Detection of Organophosphate Pesticides Based on a Fiber-Optic Particle Plasmon Resonance Biosensor and an Acetylcholinesterase Binding Peptide

An acetylcholinesterase (AChE) binding-based biosensor was developed for the ultrasensitive detection of organophosphate (OP) pesticides. The biosensor integrates the technique based on fiber-optic particle plasmon resonance detection and a synthetic AChE binding peptide conjugated with gold nanoparticles on the optical fiber surface via an AChE competitive binding assay. The OP pesticides present in the solution hinder the binding of AChE to the peptide on the biosensor by competing for the binding sites present in AChE. The limit of detection obtained for parathion using this method was observed to be 0.66 ppt (2.3 pM). This method shows a wide linear dynamic range of 6 orders. Furthermore, the use of the AChE binding peptide in the biosensor can better discriminate OPs against carbamates by using only a single biosensor. The practical application of this method was tested using spiked samples, which yielded good recovery and reproducibility. The spiked sample required minimal pretreatment before analysis; hence, this biosensor may also be used in the field.

Fusion proteins of organophosphorus hydrolase and pHluorin for a whole-cell biosensor for organophosphorus pesticide measurement

Fusion proteins composed of an organophosphorus hydrolase (OPH) and pHluorin, a pH-sensitive green fluorescent protein variant, were constructed as whole-cell biosensors to measure organophosphorus pesticides. pHluorin was used to detect the pH changes because of the hydrolase of paraoxon by OPH. To examine the order of fusion of OPH and pHluorin, pHluorin-OPH and OPH-pHluorin fusion proteins were constructed. In addition, a peptide linker consisting of 15 amino acid was inserted between pHluorin and OPH to reduce steric hindrance. OPH and pHluorin activities were evaluated in cells expressing the four fusion proteins. The both activities of pHluorin-OPH and pHluorin-linker-OPH were higher than that of OPH-pHluorin and OPH-linker-pHluorin. Effects of the peptide linker on the activities were slight. Therefore, pHluorin-OPH and pHluorin-linker-OPH were found to be suitable for organophosphorus pesticide measurements. Using cells expressing pHluorin-linker-OPH, 0.5 μg/mL of paraoxon could be measured.

Pesticide pestilence: Global scenario and recent advances in detection and degradation methods

Increased anthropogenic activities are confronted as the main cause for rising environmental and health concerns globally, presenting an indisputable threat to both environment and human well-being. Modern-day industrialization has given rise to a cascade of concurrent environmental and health challenges. The global human population is growing at an alarming rate, posing tremendous pressure on future food security, and healthy and environmentally sustainable diets for all. To feed all, the global food production needs to increase by 50% by 2050, but this increase has to occur from the limited arable land, and under the present-day climate variabilities. Pesticides have become an integral component of contemporary agricultural system, safeguarding crops from pests and diseases and their use must be reduce to fulfill the SDG (Sustainable Development Goals) agenda . However, their indiscriminate use, lengthy half-lives, and high persistence in soil and aquatic ecosystems have impacted global sustainability, overshot the planetary boundaries and damaged the pure sources of life with severe and negative impacts on environmental and human health. Here in this review, we have provided an overview of the background of pesticide use and pollution status and action strategies of top pesticide-using nations. Additionally, we have summarized biosensor-based methodologies for the rapid detection of pesticide residue. Finally, omics-based approaches and their role in pesticide mitigation and sustainable development have been discussed qualitatively. The main aim of this review is to provide the scientific facts for pesticide management and application and to provide a clean, green, and sustainable environment for future generations.

Organophosphate pesticides an emerging environmental contaminant: Pollution, toxicity, bioremediation progress, and remaining challenges

Organophosphates (OPs) are an integral part of modern agriculture; however, due to overexploitation, OPs pesticides residues are leaching and accumulating in the soil, and groundwater contaminated terrestrial and aquatic food webs. Acute exposure to OPs could produce toxicity in insects, plants, animals, and humans. OPs are known for covalent inhibition of acetylcholinesterase enzyme in pests and terrestrial/aquatic organisms, leading to nervous, respiratory, reproductive, and hepatic abnormalities. OPs pesticides also disrupt the growth-promoting machinery in plants by inhibiting key enzymes, permeability, and trans-cuticular diffusion, which is crucial for plant growth. Excessive use of OPs, directly/indirectly affecting human/environmental health, raise a thoughtful global concern. Developing a safe, reliable, economical, and eco-friendly methods for removing OPs pesticides from the environment is thus necessary. Bioremediation techniques coupled with microbes or microbial-biocatalysts are emerging as promising antidotes for OPs pesticides. Here, we comprehensively review the current scenario of OPs pollution, their toxicity (at a molecular level), and the recent advancements in biotechnology (modified biocatalytic systems) for detection, decontamination, and bioremediation of OP-pesticides in polluted environments. Furthermore, the review focuses on onsite applications of OPs degrading enzymes (immobilizations/biosensors/others), and it also highlights remaining challenges with future approaches.

Effective remediation and decontamination of organophosphorus compounds using enzymes: From rational design to potential applications

Organophosphorus compounds (OPs) have been widely used in agriculture for decades because of their high insecticidal efficiency, which maintains and increases crop yields worldwide. More importantly, OPs, as typical chemical warfare agents, are a serious concern and significant danger for military and civilian personnel. The widespread use of OPs, superfluous and unreasonable use, has caused great harm to the environment and food chain. Developing efficient and environmentally friendly solutions for the decontamination of OPs is a long-term challenge. Microbial enzymes show potential application as natural and green biocatalysts. Thus, utilizing OP-degrading enzymes for environmental decontamination presents significant advantages, as these enzymes can rapidly hydrolyze OPs; are environmentally friendly, nonflammable, and noncorrosive; and can be discarded safely and easily. Here, the properties, structure and catalytic mechanism of various typical OP-degrading enzymes are reviewed. The methods and effects utilized to improve the expression level, catalytic performance and stability of OP-degrading enzymes were systematically summarized. In addition, the immobilization of OP-degrading enzymes was explicated emphatically, and the latest progress of cascade reactions based on immobilized enzymes was discussed. Finally, the latest applications of OP-degrading enzymes were summarized, including biosensors, nanozyme mimics and medical detoxification. This review provides guidance for the future development of OP-degrading enzymes and promotes their application in the field of environmental bioremediation and medicine.

Use of whole-cell bioreporters to assess bioavailability of contaminants in aquatic systems

Water contamination has become increasingly a critical global environmental issue that threatens human and ecosystems’ health. Monitoring and risk assessment of toxic pollutants in water bodies is essential to identifying water pollution treatment needs. Compared with the traditional monitoring approaches, environmental biosensing via whole-cell bioreporters (WCBs) has exhibited excellent capabilities for detecting bioavailability of multiple pollutants by providing a fast, simple, versatile and economical way for environmental risk assessment. The performance of WCBs is determined by its elements of construction, such as host strain, regulatory and reporter genes, as well as experimental conditions. Previously, numerous studies have focused on the design and construction of WCB rather than improving the detection process and commercialization of this technology. For investigators working in the environmental field, WCB can be used to detect pollutants is more important than how they are constructed. This work provides a review of the development of WCBs and a brief introduction to genetic construction strategies and aims to summarize key studies on the application of WCB technology in detection of water contaminants, including organic pollutants and heavy metals. In addition, the current status of commercialization of WCBs is highlighted.

Microtoxicology by microfluidic instrumentation: a review

Microtoxicology is concerned with the toxic effects of small amounts of substances. This review paper discusses the application of small amounts of noxious substances for toxicological investigation in small volumes. The vigorous development of miniaturized methods in microfluidics over the last two decades involves chip-based devices, micro droplet-based procedures, and the use of micro-segmented flow for microtoxicological studies. The studies have shown that the microfluidic approach is particularly valuable for highly parallelized and combinatorial dose-response screenings. Accurate dosing and mixing of effector substances in large numbers of microcompartments supplies detailed data of dose-response functions by highly concentration-resolved assays and allows evaluation of stochastic responses in case of small separated cell ensembles and single cell experiments. The investigations demonstrate that very different biological targets can be studied using miniaturized approaches, among them bacteria, eukaryotic microorganisms, cell cultures from tissues of multicellular organisms, stem cells, and early embryonic states. Cultivation and effector exposure tests can be performed in small volumes over weeks and months, confirming that the microfluicial strategy is also applicable for slow-growing organisms. Here, the state of the art of miniaturized toxicology, particularly for studying antibiotic susceptibility, drug toxicity testing in the miniaturized system like organ-on-chip, environmental toxicology, and the characterization of combinatorial effects by two and multi-dimensional screenings, is discussed. Additionally, this review points out the practical limitations of the microtoxicology platform and discusses perspectives on future opportunities and challenges.

Recent Trends in Biosensors for Environmental Quality Monitoring

The monitoring of environmental pollution requires fast, reliable, cost-effective and small devices. This need explains the recent trends in the development of biosensing devices for pollutant detection. The present review aims to summarize the newest trends regarding the use of biosensors to detect environmental contaminants. Enzyme, whole cell, antibody, aptamer, and DNA-based biosensors and biomimetic sensors are discussed. We summarize their applicability to the detection of various pollutants and mention their constructive characteristics. Several detection principles are used in biosensor design: amperometry, conductometry, luminescence, etc. They differ in terms of rapidity, sensitivity, profitability, and design. Each one is characterized by specific selectivity and detection limits depending on the sensitive element. Mimetic biosensors are slowly gaining attention from researchers and users due to their advantages compared with classical ones. Further studies are necessary for the development of robust biosensing devices that can successfully be used for the detection of pollutants from complex matrices without prior sample preparation.

High-Throughput Aptamer Microarrays for Fluorescent Detection of Multiple Organophosphorus Pesticides in Food

A novel high-throughput aptamer microarray fluorescent method based on thioflavin T (ThT) was established for the sensitive detection of phoxim, parathion, fensulfothion, and isocarbophos. In this work, the aptamers in binding buffer tended to have the antiparallel G-quadruplex structure, which can bind ThT and release its potential fluorescence signal. However, when the organophosphorus pesticides (OPs) were present, partial aptamers preferred to bind them, forcing the displacement of ThT from the G-quadruplex and resulting in the significant decrease in fluorescence signal. Under optimal experimental conditions (12T spacer, 300 nM aptamer, and 80 μM ThT), the OP aptamer microarray has low limits of detection of 25.4 ng/mL for phoxim, 12.0 ng/mL for parathion, 7.7 ng/mL for fensulfothion, and 9.9 ng/mL for isocarbophos. The accuracy and reliability of the method is further verified by testing the recovery rate of OPs spiked in two different complicated sample matrices (pears and radishes). It is worth mentioning that not only the developed aptamer microarray technology has low sensitivity and a broad spectrum, but it also allows for high-throughput and rapid analysis of a variety OPs, which overcomes some of the shortcomings of other OP detection methods.

Recognition elements based on the molecular biological techniques for detecting pesticides in food: A review

Excessive use of pesticides can cause contamination of the environment and agricultural products that are directly threatening human life and health. Therefore, in the process of food safety supervision, it is crucial to conduct sensitive and rapid detection of pesticide residues. The recognition element is the vital component of sensors and methods for fast testing pesticide residues in food. Improper recognition elements may lead to defects of testing methods, such as poor stability, low sensitivity, high economic costs, and waste of time. We can use the molecular biological technique to address these challenges as a good strategy for recognition element production and modification. Herein, we review the molecular biological methods of five specific recognition elements, including aptamers, genetic engineering antibodies, DNAzymes, genetically engineered enzymes, and whole-cell-based biosensors. In addition, the application of these identification elements combined with biosensor and immunoassay methods in actual detection was also discussed. The purpose of this review was to provide a valuable reference for further development of rapid detection methods for pesticide residues.

Microbial whole-cell biosensors: Current applications, challenges, and future perspectives

Microbial Whole-Cell Biosensors (MWCBs) have seen rapid development with the arrival of 21st century biological and technological capabilities. They consist of microbial species which produce, or limit the production of, a reporter protein in the presence of a target analyte. The quantifiable signal from the reporter protein can be used to determine the bioavailable levels of the target analyte in a variety of sample types at a significantly lower cost than most widely used and well-established analytical instrumentation. Furthermore, the versatile and robust nature of MWCBs shows great potential for their use in otherwise unavailable settings and environments. While MWCBs have been developed for use in biomedical, environmental, and agricultural monitoring, they still face various challenges before they can transition from the laboratory into industrialized settings like their enzyme-based counterparts. In this comprehensive and critical review, we describe the underlying working principles of MWCBs, highlight developments for their use in a variety of fields, detail challenges and current efforts to address them, and discuss exciting implementations of MWCBs helping redefine what is thought to be possible with this expeditiously evolving technology.

Expression of Drosophila melanogaster acetylcholinesterase (DmAChE) gene splice variants in Pichia pastoris and evaluation of its sensitivity to organophosphorus pesticides

Acetylcholinesterase (AChE) is a key enzyme used to detect organophosphorus pesticide residues by the enzyme inhibition method. An accidental discovery of a mutant strain with AChE activity was made in our laboratory during the process of AChE expression by Pichia pastoris. The pPIC9K-Drosophilamelanogaster acetylcholinesterase (DmAChE)-like expression vector was constructed by codon optimization of this mutant strain, which was transformed into P. pastoris GS115, and positive clones were selected on yeast peptone dextrose (YPD) plate with G418 at 4.0 mg/mL. The GS115-pPIC9K-DmAChE-like strain was subjected to 0.5% methanol induction expression for 120 h, with a protein band at 4.3 kDa found by the tricine-sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) pattern of the fermentation supernatant. After preliminary purification by ammonium sulfate precipitation, the enzyme activity was detected to be 76.9 U/(mL⋅min). In addition, the pesticide sensitivity test proved that DmAChE-like is selective and sensitive to organophosphorus pesticides.

Surface Display Technology for Biosensor Applications: A Review

Surface display is a recombinant technology that expresses target proteins on cell membranes and can be applied to almost all types of biological entities from viruses to mammalian cells. This technique has been used for various biotechnical and biomedical applications such as drug screening, biocatalysts, library screening, quantitative assays, and biosensors. In this review, the use of surface display technology in biosensor applications is discussed. In detail, phage display, bacterial surface display of Gram-negative and Gram-positive bacteria, and eukaryotic yeast cell surface display systems are presented. The review describes the advantages of surface display systems for biosensor applications and summarizes the applications of surface displays to biosensors.

Benzenesulfonamide derivatives containing imine and amine groups: Inhibition on human paraoxonase and molecular docking studies

Sulfonamides known as inhibitors of many metabolic enzymes have been widely used as antimicrobial drugs for a long time. In the present study, we investigated in vitro inhibitory activities of benzenesulfonamide derivatives on human paraoxonase-I (hPON1). For this aim, PON1 was purified from human serum with a specific activity of 2603.57 EU/mg and 8.34% yield using simple chromatographic methods. The various concentrations of early-synthesized sixteen sulfonamide derivatives were tested on the paraoxonase activity. Ki values of compounds were found in the range of 0.28-357.70 µM. Compound H4 had the highest inhibitory activity on hPON1 as competitive. Estimated structure-activity relationship (SAR) for compounds was done based on different substituents and their positions in the compounds. Besides, the molecular docking analysis of compound H4 was performed to understand the binding interactions on the active site of the enzyme. According to these experimental results, compound H4 was a potential inhibitor of PON1.

A glassy carbon electrode modified with a monolayer of zirconium(IV) phosphonate for sensing of methyl-parathion by square wave voltammetry

A glassy carbon electrode (GCE) was consecutively modified with amino groups and phosphate groups, and then loaded with Zr(IV) ions. Fourier transform infrared spectrophotometry, field-emission scanning electron microscopy, energy dispersive X-ray spectroscopy and cyclic voltammetry were used to characterize the morphologies and electrochemical properties. The sensor was used to detect p-nitrophenyl-substituted organophosphorus pesticides, with methyl-parathion (MP) as the model analyte. Under optimized conditions, the oxidation current of square wave voltammetry (typically measured at around -0.28 V vs. saturated calomel electrode) increases linearly in the 1.0 to 100 ng mL^-1 MP concentration range, and the detection limit is 0.25 ng mL^-1 (at a signal to noise ratio of 3). Average recoveries from (spiked) real water samples are 99.9-102.2%, with relative standard deviations of 0.3-2.6% (n = 3) at three levels. The reliability and accuracy of the method was validated by HPLC. Graphical abstract Zr(IV) modified GCE is prepared via three steps. The electrode shows high specificity and selectivity towards methyl-parathion. And the linear range is 1.0 - 100.0 ng mL-¹ with the detection limit as low as 0.25 ng mL-¹ with SWV.

Construction of Novel Enzyme-Graphene Oxide Catalytic Interface with Improved Enzymatic Performance and Its Assembly Mechanism

In the present study, a novel bioinorganic catalytic interface, combining the in situ radical polymerization technique with the noncovalent adsorption method, was successfully fabricated, and its assembly mechanism was explored. The in situ radical polymerization technique was applied to construct a polymer shell around the enzyme surface to form the protein nanocapsule. Then, protein nanocapsules assembled on the surface of graphene oxide (GO) through noncovalent interactions to fabricate the dual-immobilized enzyme system. Here, native organophosphorus hydrolase (OPH) and OPH nanocapsule (nOPH10) were immobilized on GO to form the traditional immobilized OPH (OPH@GO) and dual-immobilized OPH (nOPH10@GO), respectively. The introduced polymer shell could protect the enzyme from various denaturation factors and provide abundant functional groups to interact with supports to strengthen the interactions between them. Compared to native OPH and OPH@GO, the resulting nOPH10@GO exhibited enhanced catalytic activity, stability, and reusability. The nOPH10@GO was further used to construct the biosensor, which exhibited better detection performance compared with that of OPH@GO. These features indicated that the introduced enzyme immobilization system could enhance the enzymatic performance and broaden its application prospect.

Recent progress on cell-based biosensors for analysis of food safety and quality control

Food quality and safety has become a subject of major concern for authorities and professionals in the food supply chain. Rapid methods, particularly biosensors, have exceptional specificity and sensitivity, rapid response times, low cost, relatively compact size, and are user friendly to operate. Cell-based biosensors are portable, and provide the biological activity of the analyte suitable for an initial screening of food. In this overview, the utilization of cell-based biosensors for food safety and quality analyses, such as detecting toxins, foodborne pathogens, allergens, and evaluating toxicity and function are summarized. Our results will promote the future development of cell-based biosensors in the food field.

Detection of catechol using an electrochemical biosensor based on engineered Escherichia coli cells that surface-display laccase

In this study, we report an electrochemical microbial biosensor that was made by immobilizing a bacterial laccase on the surface of Escherichia coli cells followed by adsorption of modified live cells onto a glassy-carbon electrode. Expression and surface localization of laccase on target cells were confirmed by Western blotting, flow cytometry assays and immunofluorescence microscopy observation. Increased tandem-aligned anchors with three repeats of the N-terminal domain of an ice nucleation protein were used to construct a highly active E. coli whole cell laccase-based catalytic system. When the proposed biosensor was used to detect catechol, the electrochemical response under optimized pH conditions was linear within a concentration range of 0.5 μM-300.0 μM catechol. Metal ions (Mn²⁺, Fe³⁺, Cu²⁺, Mg²⁺, Al³⁺ and Zn²⁺) at concentrations from 1 to 10 mg L^-1, bovine serum albumin and glucose at concentrations from 0.1 to 10 g L^-1, and ascorbic acid at concentrations from 0.01 to 0.1 g L^-1 did not cause a noticeable interference effect. The detection limit of 0.1 μM catechol was comparable to those of other biosensors based on purified chemically modified laccases. When used to detect catechol in real red wine and tea samples, the biosensor offered a considerable level of accuracy comparable to the HPLC method as well as high recovery rates (98.2%-103.8%) towards all of the tested samples. Moreover, the developed system also exhibited high stability and reproducibility.

Current status of water environment and their microbial biosensor techniques - Part II: Recent trends in microbial biosensor development

In Part I of the present review series, I presented the current state of the water environment by focusing on Japanese cases and discussed the need to further develop microbial biosensor technologies for the actual water environment. I comprehensively present trends after approximately 2010 in microbial biosensor development for the water environment. In the first section, after briefly summarizing historical studies, recent studies on microbial biosensor principles are introduced. In the second section, recent application studies for the water environment are also introduced. Finally, I conclude the present review series by describing the need to further develop microbial biosensor technologies. Graphical abstract Current water pollution indirectly occurs by anthropogenic eutrophication (Part I). Recent trends in microbial biosensor development for water environment are described in part II of the present review series.

Printed Graphene Electrochemical Biosensors Fabricated by Inkjet Maskless Lithography for Rapid and Sensitive Detection of Organophosphates

Solution phase printing of graphene-based electrodes has recently become an attractive low-cost, scalable manufacturing technique to create in-field electrochemical biosensors. Here, we report a graphene-based electrode developed via inkjet maskless lithography (IML) for the direct and rapid monitoring of triple-O linked phosphonate organophosphates (OPs); these constitute the active compounds found in chemical warfare agents and pesticides that exhibit acute toxicity as well as long-term pollution to soils and waterways. The IML-printed graphene electrode is nano/microstructured with a 1000 mW benchtop laser engraver and electrochemically deposited platinum nanoparticles (dia. ∼25 nm) to improve its electrical conductivity (sheet resistance decreased from ∼10 000 to 100 Ω/sq), surface area, and electroactive nature for subsequent enzyme functionalization and biosensing. The enzyme phosphotriesterase (PTE) was conjugated to the electrode surface via glutaraldehyde cross-linking. The resulting biosensor was able to rapidly measure (5 s response time) the insecticide paraoxon (a model OP) with a low detection limit (3 nM), and high sensitivity (370 nA/μM) with negligible interference from similar nerve agents. Moreover, the biosensor exhibited high reusability (average of 0.3% decrease in sensitivity per sensing event), stability (90% anodic current signal retention over 1000 s), longevity (70% retained sensitivity after 8 weeks), and the ability to selectively sense OP in actual soil and water samples. Hence, this work presents a scalable printed graphene manufacturing technique that can be used to create OP biosensors that are suitable for in-field applications as well as, more generally, for low-cost biosensor test strips that could be incorporated into wearable or disposable sensing paradigms.

Redesigning of Microbial Cell Surface and Its Application to Whole-Cell Biocatalysis and Biosensors

Microbial cell surface display technology can redesign cell surfaces with functional proteins and peptides to endow cells some unique features. Foreign peptides or proteins are transported out of cells and immobilized on cell surface by fusing with anchoring proteins, which is an effective solution to avoid substance transfer limitation, enzyme purification, and enzyme instability. As the most frequently used prokaryotic and eukaryotic protein surface display system, bacterial and yeast surface display systems have been widely applied in vaccine, biocatalysis, biosensor, bioadsorption, and polypeptide library screening. In this review of bacterial and yeast surface display systems, different cell surface display mechanisms and their applications in biocatalysis as well as biosensors are described with their strengths and shortcomings. In addition to single enzyme display systems, multi-enzyme co-display systems are presented here. Finally, future developments based on our and other previous reports are discussed.

Recent Trends on Electrochemical Sensors Based on Ordered Mesoporous Carbon

The past decade has seen an increasing number of extensive studies devoted to the exploitation of ordered mesoporous carbon (OMC) materials in electrochemistry, notably in the fields of energy and sensing. The present review summarizes the recent achievements made in field of electroanalysis using electrodes modified with such nanomaterials. On the basis of comprehensive tables, the interest in OMC for designing electrochemical sensors is illustrated through the various applications developed to date. They include voltammetric detection after preconcentration, electrocatalysis (intrinsically due to OMC or based on suitable catalysts deposited onto OMC), electrochemical biosensors, as well as electrochemiluminescence and potentiometric sensors.

Nanoyeast and Other Cell Envelope Compositions for Protein Studies and Biosensor Applications

Rapid progress in disease biomarker discovery has increased the need for robust detection technologies. In the past several years, the designs of many immunoaffinity reagents have focused on lowering costs and improving specificity while also promoting stability. Antibody fragments (scFvs) have long been displayed on the surface of yeast and phage libraries for selection; however, the stable production of such fragments presents challenges that hamper their widespread use in diagnostics. Membrane and cell wall proteins similarly suffer from stability problems when solubilized from their native environment. Recently, cell envelope compositions that maintain membrane proteins in native or native-like lipid environment to improve their stability have been developed. This cell envelope composition approach has now been adapted toward stabilizing antibody fragments by retaining their native cell wall environment. A new class of immunoaffinity reagents has been developed that maintains antibody fragment attachment to yeast cell wall. Herein, we review recent strategies that incorporate cell wall fragments with functional scFvs, which are designed for easy production while maintaining specificity and stability when in use with simple detection platforms. These cell wall based antibody fragments are globular in structure, and heterogeneous in size, with fragments ranging from tens to hundreds of nanometers in size. These fragments appear to retain activity once immobilized onto biosensor surfaces for the specific and sensitive detection of pathogen antigens. They can be quickly and economically generated from a yeast display library and stored lyophilized, at room temperature, for up to a year with little effect on stability. This new format of scFvs provides stability, in a simple and low-cost manner toward the use of scFvs in biosensor applications. The production and "panning" of such antibody cell wall composites are also extremely facile, enabling the rapid adoption of stable and inexpensive affinity reagents for emerging infectious threats.

Recent Progresses in Nanobiosensing for Food Safety Analysis

With increasing adulteration, food safety analysis has become an important research field. Nanomaterials-based biosensing holds great potential in designing highly sensitive and selective detection strategies necessary for food safety analysis. This review summarizes various function types of nanomaterials, the methods of functionalization of nanomaterials, and recent (2014-present) progress in the design and development of nanobiosensing for the detection of food contaminants including pathogens, toxins, pesticides, antibiotics, metal contaminants, and other analytes, which are sub-classified according to various recognition methods of each analyte. The existing shortcomings and future perspectives of the rapidly growing field of nanobiosensing addressing food safety issues are also discussed briefly.

Biosensor technology for pesticides--a review

Pesticides, due to their lucrative outcomes, are majorly implicated in agricultural fields for crop production enhancement. Due to their pest removal properties, pesticides of various classes have been designed to persist in the environment over a longer duration after their application to achieve maximum effectiveness. Apart from their recalcitrant structure and agricultural benefits, pesticides also impose acute toxicological effects onto the other various life forms. Their accumulation in the living system may prove to be detrimental if established in higher concentrations. Thus, their prompt and accurate analysis is a crucial matter of concern. Conventional techniques like chromatographic techniques (HPLC, GC, etc.) used for pesticides detection are associated with various limitations like stumpy sensitivity and efficiency, time consumption, laboriousity, requirement of expensive equipments and highly trained technicians, and many more. So there is a need to recruit the methods which can detect these neurotoxic compounds sensitively, selectively, rapidly, and easily in the field. Present work is a brief review of the pesticide effects, their current usage scenario, permissible limits in various food stuffs and 21st century advancements of biosensor technology for pesticide detection. Due to their exceptional performance capabilities, easiness in operation and on-site working, numerous biosensors have been developed for bio-monitoring of various environmental samples for pesticide evaluation immensely throughout the globe. Till date, based on sensing element (enzyme based, antibody based, etc.) and type of detection method used (Electrochemical, optical, and piezoelectric, etc.), a number of biosensors have been developed for pesticide detection. In present communication, authors have summarized 21st century's approaches of biosensor technology for pesticide detection such as enzyme-based biosensors, immunosensors, aptamers, molecularly imprinted polymers, and biochips technology. Also, the major technological advancements of nanotechnology in the field of biosensor technology are discussed. Various biosensors mentioned in manuscript are found to exhibit storage stability of biocomponent ranging from 30-60 days, detection limit of 10(-6) - 10(-16) M, response time of 1-20 min and applications of developed biosensors in environmental samples (water, food, vegetables, milk, and juice samples, etc.) are also discussed. Researchers all over the globe are working towards the development of different biosensing techniques based on contrast approaches for the detection of pesticides in various environmental samples.

A potentiometric biosensing system based on an isolated degrading bacterium Klebsiella sp. MP-6 for the determination of methyl parathion

A potentiometric system for methyl parathion using bacterial cells as bioreceptors and an anion-sensitive electrode as a transducer is described.

Bacillus subtilis-based colorimetric bioassay for acute biotoxicity assessment of heavy metal ions

β-Galactosidase generated byBacillus subtiliscatalyzes the hydrolysis of ONPG to produce ONP, which can be detected at 420 nm and used to evaluate acute biotoxicity of heavy metal ions that inhibit the activity of the enzyme.

Bacterial cell-surface displaying of thermo-tolerant glutamate dehydrogenase and its application in L-glutamate assay

In this paper, glutamate dehydrogenase (Gldh) is reported to efficiently display on Escherichia coli cell surface by using N-terminal region of ice the nucleation protein as an anchoring motif. The presence of Gldh was confirmed by SDS-PAGE and enzyme activity assay. Gldh was detected mainly in the outer membrane fraction, suggesting that the Gldh was displayed on the bacterial cell surface. The optimal temperature and pH for the bacteria cell-surface displayed Gldh (bacteria-Gldh) were 70°C and 9.0, respectively. Additionally, the fusion protein retained almost 100% of its initial enzymatic activity after 1 month incubation at 4°C. Transition metal ions could inhibit the enzyme activity to different extents, while common anions had little adverse effect on enzyme activity. Importantly, the displayed Gldh is most specific to l-glutamate reported so far. The bacterial Gldh was enabled to catalyze oxidization of l-glutamate with NADP(+) as cofactor, and the resultant NADPH can be detected spectrometrically at 340nm. The bacterial-Gldh based l-glutamate assay was established, where the absorbance at 340nm increased linearly with the increasing l-glutamate concentration within the range of 10-400μM. Further, the proposed approach was successfully applied to measure l-glutamate in real samples.

Nanomaterials-based electrochemical detection of chemical contaminants

Recent advances in the development of nanomaterials-based electrochemical sensors for environmental monitoring and food safety applications are assessed.