Amplified fluorescent aptasensor through catalytic recycling for highly sensitive detection of ochratoxin A

Plasmonic colorimetry and G-quadruplex fluorescence-based aptasensor: A dual-mode, protein-free and label-free detection for OTA

G-quadruplexes (G4) have received significant attention in the field of aptasensors owing to their unique physicochemical characteristics. A dual-mode, protein-free and label-free aptamer sensor based on plasmonic colorimetry and G4 fluorescence (PC@GF-aptasensor) was proposed for ochratoxin A (OTA). Colorimetry mode was achieved through the surface plasmon resonance (SPR) effect, which related to the OTA-Apt-based G4-OTA. The fluorescence mode was reflected by the insertion of thioflavin T (ThT) into G4-OTA. The OTA could be interpreted via three readouts: (1) naked eye (LOD of 2.0 ng mL-1), (2) smartphone (LOD of 1.65 ng mL-1), and (3) spectrofluorometer (LOD of 0.93 ng mL-1). The PC@GF-aptasensor exhibited several advantages, such as a standardised recognition group, simplified operation, low background signal, and practicality. The proposed PC@GF-aptasensor integrated SPR-based multicolour interpretation and ThT-inserted fluorescence reflection to obtain a dual-mode optical biosensor, which may provide valuable insights for the development of other targets with G4-based aptamers.

The Electrochemical Detection of Ochratoxin A in Apple Juice via MnCO3 Nanostructures Incorporated into Carbon Fibers Containing a Molecularly Imprinting Polymer

A novel electrochemical sensor based on MnCO3 nanostructures incorporated into carbon fibers (MnCO3NS/CF), including a molecularly imprinting polymer (MIP), was developed for the determination of Ochratoxin A (OTA). In this study, a sensitive and selective sensor design for OTA detection was successfully performed by utilizing the selectivity and catalysis properties of MIP and the synthesized MnCO3NS/CF material at the same time. MnCO3 nanostructures incorporated into carbon fibers were first characterized by using various analytical techniques. The sensor revealed a linearity towards OTA in the range of 1.0 × 10-11-1.0 × 10-9 mol L-1 with a detection limit (LOD) of 2.0 × 10-12 mol L-1. The improved electrochemical signal strategy was achieved by high electrical conductivity on the electrode surface, providing fast electron transportation. In particular, the analysis process could be finished in less than 5.0 min without complex and expensive equipment. Lastly, the molecular imprinted electrochemical sensor also revealed superior stability, repeatability and reproducibility.

Sensitive microscale thermophoresis assay for rapid ochratoxin A detection with fluorescently labeled engineered aptamer

Ochratoxin A (OTA) is a widespread mycotoxin that causes contamination in a variety of foodstuffs and environments, inducing great health risks to humans and animals. Rapid and sensitive detection of OTA is necessary for food safety, environmental health, and risk assessment. Herein, we report an aptamer microscale thermophoresis (MST) assay for OTA, with the unique merits of ratiometric analysis, rapid measurement, simple operation, high sensitivity, low sample consumption, and high throughput. A fluorescein (FAM)-labeled high-affinity DNA aptamer with a G-quadruplex and duplex structure was used as the recognition element for OTA, and MST, which measures the fluorescence responses of the sample solution inside capillaries to a mild temperature increase generated by infrared laser heating, was employed for signal generation. Upon OTA binding, the FAM-labeled aptamer probe underwent changes in conformation and stability, and the bound and unbound aptamer probes showed significant differences in their MST signals. To achieve sensitive detection of OTA with a large signal change, we systematically characterized aptamers with different stem lengths, which had large effects on the MST responses of the aptamer probes to OTA. We found that a 32-mer aptamer with FAM label at the 3' end gave a sensitive MST response to OTA, allowing OTA detection within seconds with a detection limit of 0.98 nM under optimal experimental conditions. This aptamer MST assay shows potential in real sample analysis and broad applications.

Quantitative and qualitative analysis of ochratoxin-A using fluorescent CQDs@DNA-based nanoarchitecture assembly to monitor food safety and quality

Ochratoxin A (OTA), a mycotoxin formed by various fungi, such as Aspergillus and Penicillium species, is dangerous to human health. Thus, to circumvent the risk of OTA ingestion, the recognition and quantification of OTA levels are of great significance. A perusal of the literature has revealed that the integration of DNA/Carbon Quantum Dot (CQD)-based hybrid systems may exhibit the unique electronic and optical properties of nanomaterials/nanoarchitecture and consequent recognition properties. Herein, we developed the CQDs@DNA-based hybrid nanoarchitecture system for the selective detection of OTA, which exhibits modulation in the emission spectrum after interaction with OTA, with a significant binding constant (K_a = 3.5 × 10⁵ M^-1), a limit of detection of 14 nM, limit of quantification of 47 nM and working range of 1-10 μM. The mechanism for sensing the OTA has been corroborated using fluorescence, UV-visible absorption spectroscopy, and FTIR techniques, demonstrating the binding mode of CQD@DNA hybrid nano-architecture assembly with OTA. Further, we demonstrated the sensing ability of developed CQDs@DNA-based nanoarchitecture assembly towards the quantification of OTA in real food monitoring analysis for real-time applications, which makes this developed nanoarchitecture assembly the potential candidate to conveniently monitor food safety and quality for human health.

A sensitive MnO2 nanosheet sensing platform based on a fluorescence aptamer sensor for the detection of zearalenone

An aptamer sensor based on manganese dioxide (MnO₂) nanosheets was developed for the detection of zearalenone (ZEN). The ZEN aptamer was modified at the 5'-end by a 6-carboxyfluorescein (6-FAM) fluorophore with self-assembly on MnO₂ nanosheets. Interaction of the 6-FAM fluorophore at the 5'-end of the ZEN aptamer with the MnO₂ nanosheet lowered fluorescence (FL) intensity due to fluorescence resonance energy transfer (FRET). The introduction of ZEN into the sensing system resulted in hybridization with the ZEN aptamer, forming a stable G-quadruplex/ZEN, which exhibited a low affinity for the MnO₂ nanosheet surface. The distance between the 6-FAM fluorophore and MnO₂ nanosheet hampered FRET, with a consequent strong FL signal. Under the optimal experimental conditions, the FL intensity of the sensing system showed a good linear correlation with ZEN concentration in the range of 1.5-10.0 ng mL^-1, and a detection limit (S/N = 3) of 0.68 ng mL^-1. The sensing system delivered enhanced specificity for the detection of ZEN, and can find wide application in the detection of other toxins by replacing the sequence of the recognition aptamer.

Two Innovative Fumaric Acid Bridging Lanthanide-Encapsulated Hexameric Selenotungstates Containing Mixed Building Units and Electrochemical Performance for Detecting Mycotoxin

Two particular fumaric acid bridging lanthanide-encapsulated selenotungstates [H₂N(CH₃)₂]₁₆Na₈[Ln₃(H₂O)₇]₂ [W₄O₈(C₄H₂O₄) (C₄H₃O₄)]₂[SeW₆O₂₅]₂[B-α-SeW₉O₃₃]₄·46H₂O [Ln = Ce³⁺ (1), La³⁺ (2)] were acquired by the deliberately designed step-by-step synthetic strategy, which are composed of four trilacunary Keggin [B-α-SeW₉O₃₃]^8- and two original [SeW₆O₂₅]^10- building units together with one fumaric acid bridging heterometallic [Ln₃(H₂O)₇]₂[W₄O₈(C₄H₂O₄) (C₄H₃O₄)]₂²⁸⁺ entity. Particularly, this heterometallic cluster contains four fumaric acid ligands, which play two different roles: one works as the pendant decorating the cluster and the other acts as the linker connecting the whole structure. In addition, the 1@DDA hybrid material was produced through the cation exchange of 1 and dimethyl distearylammonium chloride (DDA·Cl) and its beehive-shaped film of 1@DDA was prepared by the breath figure method, which can be further used to establish an electrochemical biosensor for detecting a kind of mycotoxin-ochratoxin A (OX-A). The 1@DDA beehive-shaped film-based electrochemical biosensor exhibits good reproducibility and specific sensing toward OX-A with a low detection limit of 29.26 pM. These results highlight the huge feasibility of long-chain flexible ligands in building lanthanide-encapsulated selenotungstates with structural complexity and further demonstrate great electrochemical application potentiality of polyoxometalate-involved materials in bioanalysis, tumor diagnosis, and iatrology.

A sensitive and simple competitive nanozyme-linked apta-sorbent assay for the dual-mode detection of ochratoxin A

The enzyme-linked apta-sorbent assay (ELASA) is widely used for the detection of small-molecule compounds as a result of low cost and reagent stability of aptamers. However, enzyme labels used in ELASA still suffer from some drawbacks, such as high production cost and limited stability. To overcome the drawbacks, we reported a nanozyme-linked apta-sorbent assay (NLASA) coupled with surface-enhanced Raman scattering (SERS)-colorimetric dual-mode detection. For nanozyme labels, Pd-Pt bimetallic nanocrystals (Pd-Pt NRs) could catalyze 3,3',5,5'-tetramethylbenzidine (TMB) to blue TMB²⁺, whose color variation could not only be distinguished by naked eyes but also had a strong SERS signal. The NLASA method was employed to detect ochratoxin A (OTA) with a limit of detection values of 0.097 nM (0.039 ppb) and 0.042 nM (0.017 ppb) via the colorimetric and SERS methods, respectively. This method was applied for the determination of OTA in wine and grape samples, and the detection results were in a satisfied agreement with those determined by the high performance liquid chromatography tandem mass spectrometry (HPLC-MS/MS) method. The proposed NLASA method provided a rapid and sensitive detection for OTA and could also be broadened for other small-molecules.

Adsorption-desorption nano-aptasensors: fluorescent screening assays for ochratoxin A

In this study, a FRET-based fluorescent aptasensor for the detection of ochratoxin A (OTA) was optimized based on the quenching efficiency of single-walled carbon nanotubes (SWCNTs) and the binding affinity of aptamers. OTA aptamers were conjugated with quantum dots and adsorbed to the surface of both acid-modified and unmodified SWCNTs. The maximum fluorescence quenching efficiency of the SWCNTs were compared. Acid-modified SWCNTs (amSWCNTs) have moderate quenching efficiency, providing an optimal sensitivity for qualitative fluorescence-enhancement biosensor assays. The binding parameters of the QD-modified OTA aptamers (1.12.2 and A08min) on the surface of amSWCNTs were compared. Based on our results, the A08min aptamer is a better candidate for OTA detection. Using the A08min aptamer, the SWCNT method had a limit of detection (LOD) of 40 nM. The amSWCNT method had a significantly lower LOD of 14 nM. Turn-on fluorescent nano-aptasensors are emerging as an effective diagnostic tool for simple detection of mycotoxins. Nanocomplexes designed for the detection of mycotoxins in solution and paper-based tests have proven to be useful.

Nanomaterial-based aptamer biosensors for ochratoxin A detection: a review

Ochratoxin A (OTA) is a widely distributed mycotoxin that often contaminates food, grains and animal feed. It poses a serious threat to human health because of its high toxicity and persistence. Therefore, the development of an inexpensive, highly sensitive, accurate and rapid method for OTA detection is imperative. In recent years, various nanomaterials used in the establishment of aptasensors have attracted great attention due to their large surface-to-volume ratio, good stability and facile preparation. This review summarizes the development of nanomaterial-based aptasensors for OTA determination and sample treatment over the past 5 years. The nanomaterials used in OTA aptasensors include metal, carbon, luminescent, magnetic and other nanomaterials. Finally, the limitations and future challenges in the development of nanomaterial-based OTA aptasensors are reviewed and discussed.

Construction of a fluorescence biosensor for ochratoxin A based on magnetic beads and exonuclease III-assisted DNA cycling signal amplification

Specific and sensitive detection of hazardous mycotoxins in agricultural crops is one of the most important goals of food safety. A fluorescence biosensor for sensitive detection of ochratoxin A (OTA) was constructed via magnetic beads and the exonuclease III (Exo III)-assisted trigger DNA circle amplification approach. Exo III-assisted trigger DNA circle amplification can be utilized as an effective strategy for the sensitive detection of OTA. The employment of streptavidin labeled magnetic beads offers a manner for the accumulation and separation of the hairpin signal probe sDNA-FAM in solution. After target specific recognition, the aptamers combined with OTA were released and the remaining block DNA (bDNA) probes captured the signal probes on magnetic bead modified fluorophores. Subsequently, the enzyme digestion reaction leads to the fluorophore free solution. Exo III-assisted DNA circle amplification contributed to the high sensitivity of the presented OTA fluorescence aptasensor. The experimental results demonstrate that the aptasensor is sensitive with the limit of detection as low as 0.28 ng mL^-1 for OTA, which was lower than that of the proposed aptasensors reported by the other literature on fluorescence methods. Additionally, the developed aptasensor with the diverse aptamer sequence shows promising potential applications in food monitoring.

Engineering DNA G-quadruplex assembly for label-free detection of Ochratoxin A in colorimetric and fluorescent dual modes

Colorimetric and fluorescent methods for Ochratoxin A (OTA) detection are convenient and well received. However, the pigments and autofluorescence originated from food matrices often interfere with detection signals. We have developed a strategy with colorimetric and fluorescent dual modes to solve this challenge. In the colorimetric mode, OTA aptamer (AP9) was assembled into a DNA triple-helix switch with a specially designed signal-amplifying sequence. The OTA-induced G-quadruplex (G4) of AP9 would open the switch and release the signal-amplifying sequence for colorimetric signal amplification. The G4 structures of AP9 were further utilized to combine with the fluorogenic dye ThT for fluorescent mode. By skillfully engineering DNA G4 assembly for signal amplification, there was no need for any DNA amplification or nanomaterials labeling. Detections could be carried out in a wide temperature range (22-37 ℃) and finished rapidly (colorimetric mode, 60 min; fluorescent mode, 15 min). Broad linear ranges (colorimetric mode, 10-1.5 ×10³ μg/kg; fluorescent mode, 0.05-1.0 ×10³ μg/kg) were achieved. The limit of detection for colorimetric and fluorescent modes were 4 μg/kg and 0.01 μg/kg, respectively. The two modes have been successfully applied to detect OTA in samples with intrinsic pigments and autofluorescence, showing their applicability and reliability.

Design of terbium (III)-functionalized covalent organic framework as a selective and sensitive turn-on fluorescent switch for ochratoxin A monitoring

For the first time, we develop a terbium (III)-functionalized covalent organic framework named Dpy-NhBt-COF@Tb³⁺, through anchoring Tb³⁺ onto a two-dimensional imine COF (Dpy-NhBt-COF), as the selective and sensitive turn-on fluorescent switch for ochratoxin A (OTA) monitoring. Of particular significance, Tb³⁺ actually plays two roles during sensing process: the specific response signal, and exclusive recognition sites for OTA, while Dpy-NhBt-COF acts as the protector for Tb³⁺. The sensing process involves the replacement of coordinated water molecules from Tb³⁺ by OTA and the energy transfer from OTA to Tb³⁺ centers, resulting in remarkable fluorescence emergence of Tb³⁺. The stabilization of Tb³⁺ via coordination with bipyridine of Dpy-NhBt-COF not only reduces the nonselective binding of naturally occurring ligands, but also avoids the non-radiative quenching caused by solvents molecules. As a sensing platform, Dpy-NhBt-COF@Tb³⁺ possesses noticeable selectivity and high sensitivity toward OTA with an ultralow detection limit of 13.5 nM and rapid response of 10 s. Taken together, our work not only demonstrates great prospect of Tb³⁺-functionalized COF for OTA detection, but also provides a potential way to explore other functionalized materials as promising sensors for other targets.

Carbon-Based Nanocomposite Smart Sensors for the Rapid Detection of Mycotoxins

Carbon-based nanomaterials have become the subject of intensive interest because their intriguing physical and chemical properties are different from those of their bulk counterparts, leading to novel applications in smart sensors. Mycotoxins are secondary metabolites with different structures and toxic effects produced by fungi. Mycotoxins have low molecular weights and highly diverse molecular structures, which can induce a spectrum of biological effects in humans and animals even at low concentrations. A tremendous amount of biosensor platforms based on various carbon nanocomposites have been developed for the determination of mycotoxins. Therefore, the contents of this review are based on a balanced combination of our own studies and selected research studies performed by academic groups worldwide. We first address the vital preparation methods of biorecognition unit (antibodies, aptamers, molecularly imprinted polymers)-functionalized carbon-based nanomaterials for sensing mycotoxins. Then, we summarize various types of smart sensors for the detection of mycotoxins. We expect future research on smart sensors to show a significant impact on the detection of mycotoxins in food products.

Hexameric to Trimeric Lanthanide-Included Selenotungstates and Their 2D Honeycomb Organic-Inorganic Hybrid Films Used for Detecting Ochratoxin A

Two types of organic-inorganic hybrid structure-related lanthanide (Ln)-included selenotungstates (Ln-SeTs) [H₂N(CH₃)₂]₁₁Na₇[Ce₄(H₂PTCA)₂(H₂O)₁₂(HICA)]₂[SeW₄O₁₇]₂[W₂O₅]₄[SeW₉O₃₃]₄·64H₂O (1, H₃PTCA = 1,2,3-propanetricarboxylic acid, H₂ICA = itaconic acid) and [H₂N(CH₃)₂]₆Na₄[Ln₄SeW₈(H₂O)₁₄(H₂PTCA)₂O₂₈] [SeW₉O₃₃]₂·31H₂O [Ln = Pr³⁺ (2), Nd³⁺ (3)] were obtained by Ln nature control. The primary frameworks of 1-3 are composed of trivacant Keggin-type [B-α-SeW₉O₃₃]^8- and [SeW₄O_m]^n- [Ln = Ce³⁺ (1), m = 17, n = 6; Ln = Pr³⁺ (2), Nd³⁺ (3), m = 18, n = 8] fragments bridged by organic ligands and Ln clusters. Intriguingly, Ln nature results in the degradation of hexameric 1 to trimeric 2-3. Besides, 1@DMDSA and 3@DMDSA composites (DMDSA·Cl = dimethyl distearylammonium chloride) were prepared through the cation exchange method, which were then reorganized to form two-dimensional (2D) honeycomb thin films by the breath figure method. Using these honeycomb thin films as electrode materials, the aptasensors were further established by utilizing methylene blue as an indicator and cDNA and Au nanoparticles as signal amplifiers to enhance the response signal so as to realize the purpose of ochratoxin A (OTA) detection. This work provides a new platform for detecting OTA and explores the application potential of POM-based composites in biological and clinical analyses.

Establishment of a dual-aptasensor for simultaneous detection of chloramphenicol and kanamycin

Aptamers, as single-stranded DNA or RNA fragments, have been widely applied as the bio-recognition element for fabrication of flexible and reliable aptasensors to be used in food safety control, clinical therapy and diagnosis and environment monitoring fields. With increasingly fierce antibiotics resistance appearing as a worldwide problem, a highly efficient method is urgently needed to detect antibiotics residues in animal-sourced food. Herein, a simply operated aptasensor based on quantitative real-time PCR (qRT-PCR) was fabricated to realise the simultaneous detection of two antibiotics (i.e. chloramphenicol and kanamycin). The limit of detection (LOD) of 6.13 ng/mL for chloramphenicol and of 19.17 ng/mL for kanamycin of this dual-aptasensor were achieved. Actually, such LOD values were not as good as that of an aptasensor individually established for each antibiotic. The circular dichroism analysis suggested that in the dual-aptasensor, adjacent aptamers might disturb each other's binding with their respective target. Although certain detection sensitivity was lost, the dual-aptasensor could still fulfil the detection requirements, and more importantly, it would improve the detection efficiency. Finally, this dual-aptasensor was applied for detecting chloramphenicol and kanamycin in real spiked food samples, and results indicated good recovery rates. These results demonstrated this developed dual-aptasensor to be a promising highly efficient method with low cost for simultaneous detection of chloramphenicol and kanamycin residues in animal-sourced food samples.

Spectrofluorimetric study of the complexation of ochratoxin A and Cu2+: Towards the hybrid fluorimetric sensor and visual detection of ochratoxin A in wheat flour samples from farm to fork

In this study, the ochratoxin A (OTA) interaction with some metal cations exhibits a quenching effect of the Cu²⁺, Co²⁺, and Ni²⁺ in the OTA intrinsic fluorescence intensity. The property of the OTA fluorescence change in complexation with the Cu²⁺ has been applied in developing a label-free and selective fluorimetric sensor for fast detection of the OTA trace amounts in wheat flour samples. The achieved color difference map (CDM) based on the spectral profile provides the technical support for the rapid visual sensing of OTA in the wheat flour samples. The feasibility of the hybrid fluorimetric sensor and visual OTA detection in wheat flour samples has been confirmed with the high-performance liquid chromatography (HPLC) method as a standard method. The calculated LOD (0.4 ng g^-1) and LOQ (1.2 ng g^-1) values of the proposed method are much lower than the maximum permissible limit of OTA value reported by the European Union (5 ng g^-1).

Amplified Fluorescent Aptasensor for Ochratoxin A Assay Based on Graphene Oxide and RecJf Exonuclease

In this study, we developed an aptamer-based fluorescent sensing platform for the detection of ochratoxin A (OTA) based on RecJ_f exonuclease-assisted signal amplification and interaction between graphene oxide (GO) and the OTA aptamer (OTA-apt). After optimizing the experimental conditions, the present aptamer-based sensing system can exhibit excellent fluorescent response in the OTA assay, with a limit of detection of 0.07 ng/mL. In addition to signal amplification, this strategy is also highly specific for other interfering toxins. Furthermore, this aptasensor can be reliably used for assessing red wine samples spiked with different OTA concentrations (2.4, 6 and 20 ng/mL). The proposed assay plays an important role in the field of food safety and can be transformed for detecting other toxins by replacing the sequence that recognizes the aptamer.

Recent Progress and Development of G-Quadruplex-Based Luminescent Assays for Ochratoxin A Detection

Ochratoxin A (OTA) is a mycotoxin that is widespread throughout the world. It contaminates foods such as vegetables, fruits, and rice. It harms human health and has potential carcinogenic effects. The G-quadruplex (G4) is a tetraplexed DNA structure generated from guanine-rich DNA that has found emerging use in aptamer-based sensing systems. This review outlines the status of OTA contamination and conventional detection methods for OTA. Various G4-based methods to detect OTA developed in recent years are summarized along with their advantages and disadvantages compared to existing approaches.

Magneto-controlled aptasensor for simultaneous detection of ochratoxin A and fumonisin B1 using inductively coupled plasma mass spectrometry with multiple metal nanoparticles as element labels

The simultaneous detection of multiple mycotoxins is important for food safety. Here, a magneto-controlled aptasensor for quantitative analysis of ochratoxin A (OTA) and fumonisin B1 (FB1) using inductively coupled plasma mass spectrometry (ICP-MS) with multiple metal nanoparticles as element labels was proposed. Firstly, the OTA aptamer (Apt1) and the FB1 aptamer (Apt2) immobilized on the magnetic beads (MBs) were hybridized with probe DNA1-CdSe quantum dots (pDNA1-QDs) and probe DNA2-Ag nanoparticles (pDNA2-Ag NPs) labels, producing the MBs-Apt1-pDNA1-QDs and MBs-Apt2-pDNA2-Ag NPs conjugates, respectively. Then, the MBs-Apt1-OTA and MBs-Apt2-FB1 conjugates were generated with the addition of targets, resulting the pDNA1-QDs and pDNA2-Ag NPs labels released into the solutions. Finally, the signal intensities of ¹¹¹Cd and ¹⁰⁷Ag were detected by ICP-MS, achieving limits of detection of 0.10 and 0.30 ng mL^-1 for OTA and FB1, respectively. The assay showed high specificity and succeeded in wheat flour. The method provides an ideal model for sensitive analysis of multiple mycotoxins in food samples.

A quencher-free 2-aminopurine modified hairpin aptasensor for ultrasensitive detection of Ochratoxin A

A sensitive, efficient and quencher-free fluorescence aptasensor to detect Ochratoxin A (OTA) based on aptamer, 2-aminopurine (2AP) labeled Oligonucleotide sequence, as well as exonuclease I (Exo I) activity was developed. In which the aptamer specific to OTA was modified into a hairpin structure, and 8 bases at the 3' ends are exposed (H); also, 2AP is embedded in the oligonucleotide complementary to the 8 bases (2AP-probe).The detection principle based on 2AP-probe could be bonded to its complementary sequence and quenches the fluorescence of 2AP; The aptamer has a stronger affinity for the target than its complementary sequence; Exo I can dissociate single-stranded DNA and has little effect on double-stranded DNA as well as folded DNA. In the absence of OTA, the fluorescence of 2AP is quenched due to the complementary pairing of H and 2AP-probe; in the presence of OTA, H selective binding target is detached from 2AP-probe, and the fluorescence of 2AP is slightly restored. Moreover, when the Exo I is added to the detection system, 2AP-probe is dissociated by the Exo I to release the free 2AP, and the fluorescence of the system is further enhanced thereby realizing the detection of OTA. The detection limit of the aptasensor was low as 0.03 nM with a linear range of 0.5-100 nM. Moreover, the aptasensor has good selectivity and practicability and also has good potential in realizing the detection of toxic and harmful substances in food complex matrices.

Luminescent detection of Ochratoxin A using terbium chelated mesoporous silica nanoparticles

This work represents the time-resolved fluorescence detection of Ochratoxin A (OTA), a highly toxic and commonly found toxin in food stuffs, by a terbium (Tb³⁺) chelated nanoparticle sensor with high sensitivity and remarkable selectivity. The coordination of OTA to Tb³⁺ center on nanoparticle surface resulted in the significant enhancement of the fluorescence signal in nanomolar concentrations with a detection limit of 20 ppb. In contrast, no enhancements were observed in the presence of other common mycotoxins such as Aflatoxin B1, Zearalenone, Citrinin and Patulin. The results indicate that the Tb³⁺ chelated nanoparticle sensor has great potential for applications in food analysis and safety.

A review on recent developments in optical and electrochemical aptamer-based assays for mycotoxins using advanced nanomaterials

This review (with 163 refs) covers the recent developments of nanomaterial-based optical and electrochemical sensors for mycotoxins. The review starts with a brief discussion on occurrence, distribution, toxicity of mycotoxins and the legislations in monitoring their levels. It further outlines the research methods, various recognition matrices and the strategies involved in the development of highly sensitive and selective sensor systems. It also points out the salient features and importance of aptasensors in the detection of mycotoxins along with the different immobilization methods of aptamers. The review meticulously discusses the performance of different optical and electrochemical sensors fabricated using aptamers coupled with nanomaterials (CNT, graphene, metal nanoparticles and metal oxide nanoparticles). The review addresses the limitations in the current developments as well as the future challenges involved in the successful construction of aptasensors with the functionalized nanomaterials. Graphical abstract Recent developments in nanomaterial based aptasensors for mycotoxins are summarized. Specifically, the efficiency of the nanomaterial coupled aptasensors (such as CNT, graphene, metal nanoparticles and metal oxide nanoparticles) in optical and electrochemical methods are discussed.

Advances in biosensors for the detection of ochratoxin A: Bio-receptors, nanomaterials, and their applications

Ochratoxin A (OTA) is a class of mycotoxin mainly produced by the genera Aspergillus and Penicillium. OTA can cause various forms of kidney, liver and brain diseases in both humans and animals although trace amount of OTA is normally present in food. Therefore, development of fast and sensitive detection technique is essential for accurate diagnosis of OTA. Currently, the most commonly used detection methods are enzyme-linked immune sorbent assays (ELISA) and chromatographic techniques. These techniques are sensitive but time consuming, and require expensive equipment, highly trained operators, as well as extensive preparation steps. These drawbacks limit their wide application in OTA detection. On the contrary, biosensors hold a great potential for OTA detection at for both research and industry because they are less expensive, rapid, sensitive, specific, simple and portable. This paper aims to provide an extensive overview on biosensors for OTA detection by highlighting the main biosensing recognition elements for OTA, the most commonly used nanomaterials for fabricating the sensing interface, and their applications in different read-out types of biosensors. Current challenges and future perspectives are discussed as well.

Label-free and sensitive detection of Ochratoxin A based on dsDNA-templated copper nanoparticles and exonuclease-catalyzed target recycling amplification

Ochratoxin A (OTA) is one of the most toxic mycotoxins and exists in various food commodities. Herein, a sensitive fluorescence method was developed for OTA detection which combines the advantages of label-free dsDNA-templated copper nanoparticles (CuNPs), high selectivity of OTA aptamer and high efficiency of exonuclease-catalyzed target recycling amplification. OTA aptamer was hybridized with its complementary DNA (cDNA), and the obtained dsDNA acted as the template for fluorescent CuNPs. In the presence of its target (OTA), the aptamer prefers to form an OTA-aptamer complex in lieu of an aptamer-DNA duplex, which results in the dissociation of the aptamer-DNA duplex. The released cDNA and aptamer could be digested into mononucleotides by the RecJf exonuclease (single-stranded DNA specific exonuclease), and the target was liberated and could participate in the next reaction cycle. The above process resulted in the degradation of a large amount of template dsDNA, which prevented the synthesis of CuNPs, thus resulting in low fluorescence of the system. Based on this strategy, a label-free and sensitive detection of OTA was developed with a low detection limit of 5 ng mL-1 (S/N = 3). Our strategy was further validated and evaluated successfully by assaying OTA in real samples. The proposed assay has great potential as an OTA quantification method for use in the food safety field.

Sensitive colorimetric detection of ochratoxin A by a dual-functional Au/Fe3O4 nanohybrid-based aptasensor

A novel colorimetric aptasensor based on a Au/Fe₃O₄ nanohybrid was developed to detect ochratoxin A (OTA). The aptasensor is composed of a free OTA aptamer, a Au/Fe₃O₄ nanohybrid coated with biotinylated complementary DNA of the OTA aptamer (biotin-cDNA-Au/Fe₃O₄), and free alkaline-phosphatase-labeled streptavidin (SA-ALP). The Au/Fe₃O₄ nanohybrid not only immobilizes biotin-cDNA but also magnetically separates SA-ALP from the sample solution. One part of the OTA aptamer sequence hybridizes with biotin-cDNA immobilized on Au/Fe₃O₄, and the left part of the OTA aptamer sequence covers the biotin and blocks the specific interaction between biotin and SA-ALP. OTA can interrupt the interaction of OTA aptamer binding to biotin-cDNA-Au/Fe₃O₄ and can inhibit the shielding effect of the OTA aptamer on biotin. The amount of SA-ALP that can be captured by biotin-cDNA-Au/Fe₃O₄ thus increases with increasing OTA concentration. Through a simple magnetic separation, the collected SA-ALP-linked Au/Fe₃O₄ can produce a yellow-colored solution in the presence of p-nitrophenyl phosphate (p-NPP). This colorimetric aptasensor can detect OTA as low as 1.15 ng mL⁻¹ with high specificity.

A novel colorimetric aptasensor based on a Au/Fe₃O₄ nanohybrid was developed to detect ochratoxin A (OTA).

A Facile, Label-Free, and Universal Biosensor Platform Based on Target-Induced Graphene Oxide Constrained DNA Dissociation Coupling with Improved Strand Displacement Amplification

In this work, we report a low-cost and easy operation biosensor platform capable of detection of various analytes with high sensitivity and good selectivity. By ingeniously assigning the specific aptamer into a primer-template integrated DNA template, and using monolayer graphene oxide as a reversible and nonspecific inhibitor, the simple biosensor platform is set up. Without a target, the DNA template is constrained by the graphene oxide sheet and results in low signal. In the presence of a target, the constrained DNA template is released from the graphene oxide surface via a target-induced aptamer conformational change, and further amplified through the improved strand displacement amplification reaction. Therefore, the target detection is simply converted to DNA detection, and a correlation between target concentration and fluorescence signal can be set up. As a result, dozens-fold signal enhancement, high sensitivity, good selectivity, and potential practicability are achieved in target detection. More importantly, the proposed biosensor platform is versatile, meaning that it can greatly facilitate the detection of a variety of analytes. Due to the low cost and easy availability of sensing materials, and the elimination of tedious detection operations, we believe that this simple and universal biosensor platform can find wide applications in biological assay and environment monitoring.

A fluorometric aptasensor for patulin based on the use of magnetized graphene oxide and DNase I-assisted target recycling amplification

A fluorometric patulin (PAT) assay is presented that is based on the use of magnetic reduced graphene oxide (rGO) and DNase I. The fluorescence of the PAT aptamer labelled with 6-carboxyfluorescein (FAM) is quenched by magnetized reduced graphene oxide (rGO-Fe₃O₄) due to fluorescence resonance energy transfer (FRET). However, in the presence of PAT, the labelled aptamer is stripped off from rGO-Fe₃O₄. The rGO-Fe₃O₄ is then magnetically separated so that the fluorescence of free labelled PAT aptamer is restored. DNase I cannot hydrolyze the aptamer on rGO-Fe₃O₄, but it can cleave the free aptamer-PAT complex. This will release FAM and PAT which can undergo a number of additional cycles to trigger the cleavage of abundant aptamer. Recycling of DNase I-assisted target therefore leads to a strong amplification of fluorescence and consequently to an assay with low limit of detection. The detection limit for PAT is as low as 0.28 μg L^-1 which is about 13 times lower than that without using DNase I. The method offers a new approach towards rapid, sensitive and selective detection based on an aptamer. Conceivably, it has a wide scope in that it may be applied to numerous other analytes if appropriate aptamers are available. Abstract Schematic of a fluorometric assay based on the use of magnetic graphene oxide and DNase I. It was applied to the determination of patulin. DNase I was introduced for recycling amplification. The detection limit is about 13 times lower than that without using DNase I. Figure a contains poor quality of text in image. Otherwise, please provide replacement figure file.Thank you. I will provide the figure file.

Advances in aptasensors for the detection of food contaminants

Food safety is a global health objective, and foodborne diseases represent a major crisis in health. Techniques that are simple and suitable for fast screening to detect and identify pathogenic factors in the food chain are vital to ensure food safety. At present, a variety of analytical methods have been reported for the detection of pathogenic agents. Whereas the sensitivity of detection and quantification are still important challenges, we expect major advances from new assay formats and synthetic bio-recognition elements, such as aptamers. Owing to the specific folding capability of aptamers in the presence of an analyte, aptasensors have substantially and successfully been exploited for the detection of a wide range of small and large molecules (e.g., toxins, antibiotics, heavy metals, bacteria, viruses) at very low concentrations. Here, we review the use of aptasensors for the development of highly sensitive and affordable detection tools for food analysis.

Designed Strategies for Fluorescence-Based Biosensors for the Detection of Mycotoxins

Small molecule toxins such as mycotoxins with low molecular weight are the most widely studied biological toxins. These biological toxins are responsible for food poisoning and have the potential to be used as biological warfare agents at the toxic dose. Due to the poisonous nature of mycotoxins, effective analysis techniques for quantifying their toxicity are indispensable. In this context, biosensors have been emerged as a powerful tool to monitors toxins at extremely low level. Recently, biosensors based on fluorescence detection have attained special interest with the incorporation of nanomaterials. This review paper will focus on the development of fluorescence-based biosensors for mycotoxin detection, with particular emphasis on their design as well as properties such as sensitivity and specificity. A number of these fluorescent biosensors have shown promising results in food samples for the detection of mycotoxins, suggesting their future potential for food applications.

Fluorescence method for quickly detecting ochratoxin A in flour and beer using nitrogen doped carbon dots and silver nanoparticles

In this paper, a FRET (Forster resonance energy transfer) based fluorescence method was developed for the quickly detection of ochratoxin A (OTA) in agricultural products (e.g., flour and beer). A highly fluorescent nitrogen doped carbon dots (CD) were served as energy donor, the DNA and MCH (6-mercapto-1-hexanol) modified Ag nanoparticles were served as energy acceptor in the FRET system. OTA can be detected in a concentration range between 10 and 5000 nM, the limit of detection is 8.7 nM. This method has three advantages: (1) an enhanced fluorescent intensity can be acquired by utilizing the nitrogen doped CD synthesized by one-step approach without sophisticated modification of nanoparticles; (2) OTA detection was accomplished quickly (less than 30 min) by using MCH as assistant molecule; (3) an extended OTA detection linear range was acquired, which may facilitate the OTA detection in real agricultural samples, and is helpful for solving food safety problems.

Graphite nanoparticle as nanoquencher for 17β-estradiol detection using shortened aptamer sequence

Here a shortened aptamer was used as the recognition element and a graphite nanoparticle as the nanoquencher for constructing a FRET based aptasensor to detect 17β-estradiol.

Nano-Aptasensing in Mycotoxin Analysis: Recent Updates and Progress

Recent years have witnessed an overwhelming integration of nanomaterials in the fabrication of biosensors. Nanomaterials have been incorporated with the objective to achieve better analytical figures of merit in terms of limit of detection, linear range, assays stability, low production cost, etc. Nanomaterials can act as immobilization support, signal amplifier, mediator and artificial enzyme label in the construction of aptasensors. We aim in this work to review the recent progress in mycotoxin analysis. This review emphasizes on the function of the different nanomaterials in aptasensors architecture. We subsequently relate their features to the analytical performance of the given aptasensor towards mycotoxins monitoring. In the same context, a critically analysis and level of success for each nano-aptasensing design will be discussed. Finally, current challenges in nano-aptasensing design for mycotoxin analysis will be highlighted.

High-Throughput Low-Background G-Quadruplex Aptamer Chemiluminescence Assay for Ochratoxin A Using a Single Photonic Crystal Microsphere

We reported a novel hemin-G-quadruplex aptamer chemiluminescence assay platform for ochratoxin A (OTA) using the single silica photonic crystal microsphere (SPCM). The oligonucleotide A sequence containing aptamer sequences of hemin and OTA is immobilized on the surface of SPCM. The other oligonucleotide B sequence containing a partially complementary sequence with one part OTA aptamer and one part hemin aptamer is used as a blocking chain. The hybridization between chain A and chain B will be influenced by the presence or absence of OTA in the system, which will affect the bioactivity of DNAzyme. Thus, the chemiluminescence signal depends on the concentration of OTA in the samples. In the single particle assay platform, the signal/noise is remarkably enhanced, and the background signal can be ignored by separating hemin from the surface of SPCM. The limit of detection of the new method reaches to the pg/mL scale, and the linear detection range is 4 orders of magnitude for OTA. The new assay platform can provide a sensitive, cost-efficient, simple, and high-throughput screening for OTA.

Detection of ochratoxin A by aptamer-assisted real-time PCR-based assay (Apta-qPCR)

Detection of food toxins with high sensitivity is very important and challenging. Ochratoxin A (OTA) is frequently present as food contaminant in contaminated grains and grain derivatives such as bread and beer. In this work, a target-induced dissociation (TID) based aptamer-assisted real-time PCR-based assay (apta-qPCR) is developed that features effective detection of OTA. Apta-qPCR effectively combines the capabilities of aptamer to be amplified, being a nucleotide sequence, with its specific interaction with the corresponding target molecule. Compared to commonly used fluorescence-based and colorimetric methods, the sensitivity of qPCR to detect a nucleotide sequence (aptamer) has ameliorated the sensitivity of the aptamer-based detection of OTA. Here, the OTA aptamer was immobilized on the magnetic beads coated with d(T)₂₅ (dT beads). A sequence complementary to the OTA-binding portion of the aptamer was used as a linker between dT beads and the aptamer sequence. When OTA was added, the aptamer was released from the dT beads due to TID. The resulting assay was able to detect 0.009 ng/mL OTA with a wide dynamic range of 0.039-1000 ng/mL. Apta-qPCR can be easily transferred to other small molecules for highly sensitive detection using corresponding aptamers.

Fluorescent aptasensor for antibiotic detection using magnetic bead composites coated with gold nanoparticles and a nicking enzyme

Antibiotic abuse has been bringing serious pollution in water, which is closely related to human health. It is desirable to develop a new strategy for antibiotic detection. To address this problem, a sensitive fluorescent aptasensor for antibiotic detection was developed by utilizing gold nanoparticles modified magnetic bead composites (AuNPs/MBs) and nicking enzyme. AuNPs/MBs were synthesized with the help of polyethylenimine (PEI). The prepared AuNPs/MBs acted as dual-functional scaffolds that owned excellent magnetic separation capacity and strong covalent bio-conjugation. The non-specifically absorbed aptamers in AuNPs/MBs were less than that in MBs. Hence, the fluorescent aptasensor based on AuNPs/MBs show a better signal to background ratio than that based on carboxyl modified magnetic beads (MBs). In this work, ampicillin was employed as a model analyte. In the presence of ampicillin, the specific binding between ampicillin and aptamer induced structure-switching that led to the release of partial complementary DNA (cDNA) of aptamer. Then, the released cDNA initiated the cycle of nicking enzyme assisted signal amplification (NEASA). Therefore, a large amount of taqman probes were cleaved and fluorescence signal was amplified. The prepared fluorescent aptasensor bring sensitive detection in range of 0.1-100 ng mL^-1 with the limit of detection of 0.07 ng mL^-1. Furthermore, this aptasensor was also successfully applied in real sample detection with acceptable accuracy. The fluorescent aptasensor provides a promising method for efficient, rapid and sensitive antibiotic detection.

Ultrasensitive detection of ochratoxin A using aptasensors

Regarding teratogenic, carcinogenic, and immunotoxic nature of ochratoxin A (OTA), selective and sensitive monitoring of this molecule in food samples is of great importance. In recent years, various methods have been introduced for detection of OTA. However, they are usually time-consuming, labor-intensive and expensive. Therefore, these parameters limited their usage. The emerging method of detection, aptasensor, has attracted more attention for OTA detection, due to distinctive advantages including high sensitivity, selectivity and simplicity. In this review, the new developed aptasensors for detection of OTA have been investigated. We also highlighted advantages and disadvantages of different types of OTA aptasensors. This review also takes into consideration the goal to find out which designs are the most rational ones for highly sensitive detection of OTA.

An aptamer-based effective method for highly sensitive detection of chloramphenicol residues in animal-sourced food using real-time fluorescent quantitative PCR

Chloramphenicol (CAP) residues can not only harm human health through entering food chain, but also cause the spreading of drug-resistant bacteria, thereby leading to secondary environmental pollution. Therefore, it is in urgent need of establishing an efficient technology to detect CAP residues in animal-sourced food. In this study, a novel sensitive approach for detection of CAP was designed based on a CAP specific aptamer and real-time fluorescent quantitative PCR (qRT-PCR). The CAP specific aptamer was firstly hybridized with a biotin modified complementary probe, and then was immobilized on streptavidin conjugated magnetic beads through biotin. When CAP was added, the aptamer would specifically bind with CAP by forming a hairpin structure and be released from the magnetic beads for CAP detection by qRT-PCR. Factors (i.e., probe strand length, aptamer concentration, NaCl concentration and incubation time) that would influence the determination accuracy of this aptamer-based detection system were optimized. Under the optimized conditions, the present detection system exhibited a high sensitivity toward CAP with a limit of detection of 0.1ng/mL (linear range from 0.1 to 20ng/mL). Moreover, this detection system also showed high selectivity against thiamphenicol (TAP) and florfenicol (FF), which are CAP's structure analogs. Eventually, this detection system was applied for detecting CAP in real spiked milk. The recovery rate of CAP from spiked milk samples ranged from 94.0-102.0%. These results indicated this developed detection system a promising high sensitive and specific method of CAP residues detection in animal-sourced food.

Recent Progresses in Nanobiosensing for Food Safety Analysis

With increasing adulteration, food safety analysis has become an important research field. Nanomaterials-based biosensing holds great potential in designing highly sensitive and selective detection strategies necessary for food safety analysis. This review summarizes various function types of nanomaterials, the methods of functionalization of nanomaterials, and recent (2014-present) progress in the design and development of nanobiosensing for the detection of food contaminants including pathogens, toxins, pesticides, antibiotics, metal contaminants, and other analytes, which are sub-classified according to various recognition methods of each analyte. The existing shortcomings and future perspectives of the rapidly growing field of nanobiosensing addressing food safety issues are also discussed briefly.

A fluorescent aptasensor based on a DNA pyramid nanostructure for ultrasensitive detection of ochratoxin A

Analytical techniques for detection of ochratoxin A (OTA) in food products and blood serum are of great significance. In this study, a fluorescent aptasensor was developed for sensitive and specific detection of OTA, based on a DNA pyramid nanostructure (DPN) and PicoGreen (PG) dye. The designed aptasensor inherits characteristics of DPN, such as high stability and capacity for PG loading. PG, as a fluorescent dye, could bind to double-stranded DNA (dsDNA). In the absence of OTA, the pyramid structure of DPN remains intact, leading to a very strong fluorescence emission. Because of higher affinity of aptamer for its target relative to its complementary strand, upon addition of target, the pyramid structure of DPN is disassembled, leading to a weak fluorescence emission. The presented aptasensor showed high specificity toward OTA with a limit of detection (LOD) as low as 0.135 nM. Besides, the designed sensing strategy was successfully utilized to recognize OTA in serum and grape juice with LODs of 0.184 and 0.149 nM, respectively.

A FRET-based ratiometric fluorescent aptasensor for rapid and onsite visual detection of ochratoxin A

A color change observable by the naked eye to indicate the content of an analyte is considered to be the most conceivable way of various sensing protocols. By taking advantage of the Förster resonance energy transfer (FRET) principles, we herein designed a dual-emission ratiometric fluorescent aptasensor for ochratoxin A (OTA) detection via a dual mode of fluorescent sensing and onsite visual screening. Amino group-modified OTA's aptamer was firstly labeled with the green-emitting CdTe quantum dots (gQDs) donor. The red-emitting CdTe QDs (rQDs) which were wrapped in the silica sphere could serve as the reference signal, while the gold nanoparticle (AuNP) acceptors were attached on the silica surface to bind with the thiolated complementary DNA (cDNA). The hybridization reaction between the aptamer and the cDNA brought gQD-AuNP pair close enough, thereby making the FRET occur in the aptasensor fabrication, while the subsequent fluorescence recovery induced by OTA was obtained in the detection procedure. Based on the red background of the wrapped rQDs, the aptasensor in response to increasing OTA displayed a distinguishable color change from red to yellow-green, which could be conveniently readout in solution even by the naked eye. Since the bioconjugations used as the aptasensor can be produced at large scale, this method can be used for in situ, rapid, or high-throughput OTA detection after only an incubation step in a homogeneous mode. We believe that this novel aptasensing strategy provides not only a promising method for OTA detection but also a universal model for detecting diverse targets by changing the corresponding aptamer.