Bioelectronic nose combined with a microfluidic system for the detection of gaseous trimethylamine

Colorimetric and fluorometric bimodal amine chemosensor based on deprotonation-induced intramolecular charge transfer: Application to food spoilage detection

Amine derivatives are signature organic compounds generated from rotten protein food. Thus, sensitive detection of the presence of amines in protein foods can be a critical technique for monitoring their quality. In this study, we develop an organic chemosensor probe, 4-(2-(3-(dicyanomethylene)- 5,5-dimethylcyclohex-1-en-1-yl)vinyl)-N,N-diethylbenzenaminium chloride (DEAH), to effectively detect amines through discernible bimodal (colorimetric and fluorometric) changes. By exploiting the amine-triggered intramolecular charge transfer behavior, DEAH exhibits rapid color changes (<1 s) with an excellent detection limit (36.9 nM) and also fluorescence turn-on in response to amine gas. Moreover, it possesses detection capabilities in versatile conditions, including solutions, solids, and coated films, suggesting its practical applicability. In particular, DEAH shows dramatic color change from yellow to violet with exceptional color difference (△Eab) over 98, repeatable usability, and excellent selectivity to amines. Based on these compelling advantages, we successfully demonstrate real-time monitoring of amine gas generated from spoiled protein foods using DEAH-coated films.

Biosensors for Odor Detection: A Review

Animals can easily detect hundreds of thousands of odors in the environment with high sensitivity and selectivity. With the progress of biological olfactory research, scientists have extracted multiple biomaterials and integrated them with different transducers thus generating numerous biosensors. Those biosensors inherit the sensing ability of living organisms and present excellent detection performance. In this paper, we mainly introduce odor biosensors based on substances from animal olfactory systems. Several instances of organ/tissue-based, cell-based, and protein-based biosensors are described and compared. Furthermore, we list some other biological materials such as peptide, nanovesicle, enzyme, and aptamer that are also utilized in odor biosensors. In addition, we illustrate the further developments of odor biosensors.

Recent Advances of Graphene Quantum Dots in Chemiresistive Gas Sensors

Graphene quantum dots (GQDs), as 0D graphene nanomaterials, have aroused increasing interest in chemiresistive gas sensors owing to their remarkable physicochemical properties and tunable electronic structures. Research on GQDs has been booming over the past decades, and a number of excellent review articles have been provided on various other sensing principles of GQDs, such as fluorescence-based ion-sensing, bio-sensing, bio-imaging, and electrochemical, photoelectrochemical, and electrochemiluminescence sensing, and therapeutic, energy and catalysis applications. However, so far, there is no single review article on the application of GQDs in the field of chemiresistive gas sensing. This is our primary inspiration for writing this review, with a focus on the chemiresistive gas sensors reported using GQD-based composites. In this review, the various synthesized strategies of GQDs and its composites, gas sensing enhancement mechanisms, and the resulting sensing characteristics are presented. Finally, the current challenges and future prospects of GQDs in the abovementioned application filed have been discussed for the more rational design of advanced GQDs-based gas-sensing materials and innovative gas sensors with novel functionalities.

An Ir(III) cyclometalate-functionalized molecularly imprinted polymer: photophysics, photochemistry and chemosensory applications

A luminescent trimethylamine (TMA) sensor, PTMA-Ir, has been designed and synthesized through immobilizing a phosphorescent iridium(III) complex on a TMA-imprinted polymer. Detailed study shows that the quenching of phosphorescence of PTMA-Ir can serve as a reporter for the binding of TMA on the imprinting sites, thus providing a sensitive, selective, and rapid detection of TMA in both aqueous solutions and gaseous states. Loading PTMA-Ir on filter paper produced a deposition T-Ir, the phosphorescence of which is quenched within 5 s upon exposure to TMA vapor with detection limits of 9.0 ± 0.1 ppm under argon and 15.0 ± 0.1 ppm in an air atmosphere. This work provided an effective method for establishing an imprinting polymer-immobilized luminescent amine sensor.

Microfluidic integrated gas sensors for smart analyte detection: a comprehensive review

The utilization of gas sensors has the potential to enhance worker safety, mitigate environmental issues, and enable early diagnosis of chronic diseases. However, traditional sensors designed for such applications are often bulky, expensive, difficult to operate, and require large sample volumes. By employing microfluidic technology to miniaturize gas sensors, we can address these challenges and usher in a new era of gas sensors suitable for point-of-care and point-of-use applications. In this review paper, we systematically categorize microfluidic gas sensors according to their applications in safety, biomedical, and environmental contexts. Furthermore, we delve into the integration of various types of gas sensors, such as optical, chemical, and physical sensors, within microfluidic platforms, highlighting the resultant enhancements in performance within these domains.

Microbial nanowires with genetically modified peptide ligands to sustainably fabricate electronic sensing devices

Nanowires have substantial potential as the sensor component in electronic sensing devices. However, surface functionalization of traditional nanowire and nanotube materials with short peptides that increase sensor selectivity and sensitivity requires complex chemistries with toxic reagents. In contrast, microorganisms can assemble pilin monomers into protein nanowires with intrinsic conductivity from renewable feedstocks, yielding an electronic material that is robust and stable in applications, but also biodegradable. Here we report that the sensitivity and selectivity of protein nanowire-based sensors can be modified with a simple plug and play genetic approach in which a short peptide sequence, designed to bind the analyte of interest, is incorporated into the pilin protein that is microbially assembled into nanowires. We employed a scalable Escherichia coli chassis to fabricate protein nanowires that displayed either a peptide previously demonstrated to effectively bind ammonia, or a peptide known to bind acetic acid. Sensors comprised of thin films of the nanowires amended with the ammonia-specific peptide had a ca. 100-fold greater response to ammonia than sensors made with unmodified protein nanowires. Protein nanowires with the peptide that binds acetic acid yielded a 4-fold higher response than nanowires without the peptide. The protein nanowire-based sensors had greater responses than previously reported sensors fabricated with other nanomaterials. The results demonstrate that protein nanowires with enhanced sensor response for analytes of interest can be fabricated with a flexible genetic strategy that sustainably eliminates the energy, environmental, and health concerns associated with other common nanomaterials.

1D and 2D Field Effect Transistors in Gas Sensing: A Comprehensive Review

Rapid progress in the synthesis and fundamental understanding of 1D and 2D materials have solicited the incorporation of these nanomaterials into sensor architectures, especially field effect transistors (FETs), for the monitoring of gas and vapor in environmental, food quality, and healthcare applications. Yet, several challenges have remained unaddressed toward the fabrication of 1D and 2D FET gas sensors for real-field applications, which are related to properties, synthesis, and integration of 1D and 2D materials into the transistor architecture. This review paper encompasses the whole assortment of 1D-i.e., metal oxide semiconductors (MOXs), silicon nanowires (SiNWs), carbon nanotubes (CNTs)-and 2D-i.e., graphene, transition metal dichalcogenides (TMD), phosphorene-materials used in FET gas sensors, critically dissecting how the material synthesis, surface functionalization, and transistor fabrication impact on electrical versus sensing properties of these devices. Eventually, pros and cons of 1D and 2D FETs for gas and vapor sensing applications are discussed, pointing out weakness and highlighting future directions.

Artificial Olfactory Biohybrid System: An Evolving Sense of Smell

The olfactory system can detect and recognize tens of thousands of volatile organic compounds (VOCs) at low concentrations in complex environments. Bioelectronic nose (B-EN), which mimics olfactory systems, is becoming an emerging sensing technology for identifying VOCs with sensitivity and specificity. B-ENs integrate electronic sensors with bioreceptors and pattern recognition technologies to enable medical diagnosis, public security, environmental monitoring, and food safety. However, there is currently no commercially available B-EN on the market. Apart from the high selectivity and sensitivity necessary for volatile organic compound analysis, commercial B-ENs must overcome issues impacting sensor operation and other problems associated with odor localization. The emergence of nanotechnology has provided a novel research concept for addressing these problems. In this work, the structure and operational mechanisms of biomimetic olfactory systems are discussed, with an emphasis on the development and immobilization of materials. Various biosensor applications and current developments are reviewed. Challenges and opportunities for fulfilling the potential of artificial olfactory biohybrid systems in fundamental and practical research are investigated in greater depth.

Sex Pheromone Receptor-Derived Peptide Biosensor for Efficient Monitoring of the Cotton Bollworm Helicoverpa armigera

The cotton bollworm, Helicoverpa armigera (H. armigera), causes damage to a wide range of cultivated crops and is one of the pests with the greatest economic importance for global agriculture. Currently, the detection of H. armigera is based on manual sampling. A low limit of detection (LOD), convenient, and real-time monitoring method is urgently needed for its early warning and efficient management. Here, we characterized the amino acid sequence in the sex pheromone receptors (SPRs) recognizing the pheromone components of H. armigera by three-dimensional (3D) modeling and molecular docking. Next, sex pheromone receptor-derived peptides (SPRPs) were synthesized and conjugated to nanotubes by chemical connection. The modified nanotubes were used to fabricate a sensor capable of real-time monitoring of gaseous sex pheromone compounds with a low LOD (∼10 ppb for Z11-16:Ald) and selectivity, and the sensor was able to detect a single live H. armigera. Furthermore, the developed biosensor allowed direct monitoring of the pheromone release dynamics by female H. armigera and showed that the release was instantly reduced in response to light. Here, we report the first demonstration of a biosensing method for detecting gaseous sex pheromones and live H. armigera. The findings show the great potential of the SPRP sensor for broad applications in insect biology study and infestation monitoring.

Ultrasensitive Flexible Olfactory Receptor-Derived Peptide Sensor for Trimethylamine Detection by the Bending Connection Method

Trimethylamine (TMA) is a harmful gas that exists ubiquitously in the environment; therefore, the sensitive and specific monitoring of TMA is necessary. In this work, we prepared ultrasensitive flexible sensors for TMA detection based on single-walled carbon nanotubes (SWCNTs) and olfactory receptor-derived peptides (ORPs) on low-cost plastic substrates. A novel bending connection method was developed by intentionally bending the interdigitated electrodes with SWCNTs to form a three-dimensional structure during the ORP-connection process, leading to the exposure of more modification sites. The method showed ∼4.7-fold more effective connection amount of the ORPs to SWCNTs compared to the conventional flat-condition connection method. The flexible ORP-SWCNT sensors could significantly improve the limit of detection for gaseous TMA from the reported lowest limit of 10 parts per quadrillion (ppq) to 0.1 ppq. The flexible ORP sensors also exhibited excellent sensitivity to vaporized TMA standards and TMA generated by different kinds of foods under different bending conditions. The results showed that the bending connection method in this work was effective for ultrasensitive flexible ORP sensors and their associated applications.

Progress in the Development of Detection Strategies Based on Olfactory and Gustatory Biomimetic Biosensors

The biomimetic olfactory and gustatory biosensing devices have broad applications in many fields, such as industry, security, and biomedicine. The development of these biosensors was inspired by the organization of biological olfactory and gustatory systems. In this review, we summarized the most recent advances in the development of detection strategies for chemical sensing based on olfactory and gustatory biomimetic biosensors. First, sensing mechanisms and principles of olfaction and gustation are briefly introduced. Then, different biomimetic sensing detection strategies are outlined based on different sensing devices functionalized with various molecular and cellular components originating from natural olfactory and gustatory systems. Thereafter, various biomimetic olfactory and gustatory biosensors are introduced in detail by classifying and summarizing the detection strategies based on different sensing devices. Finally, the future directions and challenges of biomimetic biosensing development are proposed and discussed.

Microfluidic Gas Sensors: Detection Principle and Applications

With the rapid growth of emerging point-of-use (POU)/point-of-care (POC) detection technologies, miniaturized sensors for the real-time detection of gases and airborne pathogens have become essential to fight pollution, emerging contaminants, and pandemics. However, the low-cost development of miniaturized gas sensors without compromising selectivity, sensitivity, and response time remains challenging. Microfluidics is a promising technology that has been exploited for decades to overcome such limitations, making it an excellent candidate for POU/POC. However, microfluidic-based gas sensors remain a nascent field. In this review, the evolution of microfluidic gas sensors from basic electronic techniques to more advanced optical techniques such as surface-enhanced Raman spectroscopy to detect analytes is documented in detail. This paper focuses on the various detection methodologies used in microfluidic-based devices for detecting gases and airborne pathogens. Non-continuous microfluidic devices such as bubble/droplet-based microfluidics technology that have been employed to detect gases and airborne pathogens are also discussed. The selectivity, sensitivity, advantages/disadvantages vis-a-vis response time, and fabrication costs for all the microfluidic sensors are tabulated. The microfluidic sensors are grouped based on the target moiety, such as air pollutants such as carbon monoxide and nitrogen oxides, and airborne pathogens such as E. coli and SARS-CoV-2. The possible application scenarios for the various microfluidic devices are critically examined.

Recent Progress in Amine Gas Sensors for Food Quality Monitoring: Novel Architectures for Sensing Materials and Systems

The increasing demand for food production has necessitated the development of sensitive and reliable methods of analysis, which allow for the optimization of storage and distribution while ensuring food safety. Methods to quantify and monitor volatile and biogenic amines are key to minimizing the waste of high-protein foods and to enable the safe consumption of fresh products. Novel materials and device designs have allowed the development of portable and reliable sensors that make use of different transduction methods for amine detection and food quality monitoring. Herein, we review the past decade's advances in volatile amine sensors for food quality monitoring. First, the role of volatile and biogenic amines as a food-quality index is presented. Moreover, a comprehensive overview of the distinct amine gas sensors is provided according to the transduction method, operation strategies, and distinct materials (e.g., metal oxide semiconductors, conjugated polymers, carbon nanotubes, graphene and its derivatives, transition metal dichalcogenides, metal organic frameworks, MXenes, quantum dots, and dyes, among others) employed in each case. These include chemoresistive, fluorometric, colorimetric, and microgravimetric sensors. Emphasis is also given to sensor arrays that record the food quality fingerprints and wireless devices that operate as radiofrequency identification (RFID) tags. Finally, challenges and future opportunities on the development of new amine sensors are presented aiming to encourage further research and technological development of reliable, integrated, and remotely accessible devices for food-quality monitoring.

Monitoring Fish Freshness in Real Time under Realistic Conditions through a Single Metal Oxide Gas Sensor

The realization of an unobtrusive and effective technology able to track fish freshness in real time and inform on its edibility is highly demanded, but still unachieved. In the present paper, we address this issue through a single metal oxide gas sensor working in temperature modulation mode. The system can work without an external reference air source, which is an appealing feature for its possible integration in domestic refrigerators. Tests were carried out using fresh sea bream fillets as case study and working both inside the refrigerator and at room temperature. Parallel gas chromatography-mass spectrometry and microbiological characterization indicated the marked dependence of both the microbiological condition and the gas-phase composition from the individual sample and from the storage temperature. Despite such a large variability, which may be expected in real applications, the proposed system provided similar responses whenever the total bacterial population approached and exceeded the edibility threshold of 10⁷ CFU/g.

High-performance olfactory receptor-derived peptide sensor for trimethylamine detection based on Steglich esterification reaction and native chemical ligation connection

Trimethylamine (TMA) commonly exists in daily life and is harmful to human health, therefore the convenient and sensitive monitoring of TMA is highly desired. In this study, we developed a method to fabricate a high-performance TMA sensor by chemically conjugating olfactory receptor-derived peptides (ORPs) to single-walled carbon nanotubes (SWCNTs) on interdigital electrodes. First, the SWCNTs were modified with thioester by Steglich esterification reaction. Next, the ORPs with a cysteine residue at the N-terminus were connected to the thioester by native chemical ligation and modified to the surface of the SWCNTs. The chemical connection method enabled more effective loading of ORPs to the SWCNTs compared to the previously reported physical connection method. Using this approach, the ORPs-SWCNTs sensor for gaseous TMA was fabricated and enabled detection of TMA with a concentration as low as 0.01 parts per trillion, which was three orders of magnitude lower than the reported lowest detection limit up to date. Furthermore, we tested the performance of the ORP-sensor with vaporized TMA and TMA generated from various spoiled food, and the sensor exhibited excellent sensitivity, selectivity, and stability for TMA detection. The results demonstrated the effectiveness of the proposed chemical connection method for the fabrication of ORP-sensor and the great potential of using these sensors for applications in environmental safety, food quality evaluation, and healthcare.

Nanoporous Functionalized WS2/MWCNTs Nanocomposite for Trimethylamine Detection Based on Quartz Crystal Microbalance Gas Sensor

We have developed a tungsten disulfide (WS₂)/multiwall carbon nanotubes (MWCNTs) nanocomposite based QCM gas sensor for (trimethylamine) TMA gas sensing of low concentrations. WS₂/MWCNTs nanocomposite was synthesized via the hydrothermal method and was characterized for surface morphology, nanostructure, thermal stability, and elementary composition. The TMA-sensing properties of WS₂/MWCNTs nanocomposite based QCM sensor were investigated. The composite based QCM sensor showed faster response time, strong response amplitude, good gas capacity, and good selectivity and stability compared with as prepared WS₂ and MWCNTs-1 based QCM sensor. The response time of WS₂/MWCNTs based QCM sensor was 294.1 and 142.9 s shorter than WS₂ and MWCNTs-1 for 500 ppb TMA gas. And the response of the WS₂/MWCNTs based QCM sensor was almost stable over 40 days, and the limit of detection (LOD) was 76 ppb calculated by the ICH method. This was ascribed to the fact that MWCNTs provided a skeleton for the growth of WS₂ nanosheets and avoided agglomeration. The special structure could not only improve the structure ability but also expose more active adsorption sites. In order to further investigate the adsorption mechanism of the TMA molecule on (pure/functionalized) WS₂ materials, density functional theory (DFT) calculations based on first-principle were conducted in the Vienna Ab-initio Simulation Package under ideal conditions.

Highly sensitive gas sensing platforms based on field effect Transistor-A review

Highly selective, sensitive and fast gas sensing has attracted increasing attention in the fields of environmental protection, industrial production, personal safety as well as medical diagnostics. Field effect transistor (FET) sensors have been extensively investigated in gas sensing fields due to their small size, high sensitivity, high reliability and low energy consumption. This comprehensive review aims to discuss the recent advances in FET gas sensors based on materials such as carbon nanotubes, silicon carbide, silicon, metal oxides-, graphene-, transition metal dichalcogenides- and 2-dimensional black phosphorus. We first introduce different types of sensor structures and elaborate the gas-sensing mechanisms. Then, we describe the optimizing strategies for sensing performances, response parameters, FET based dual-mode sensors and FET based logic circuit sensors. Moreover, we present the key advances of the above materials in gas sensing performances. Meanwhile, shortcomings of such materials are also discussed and the future development of this field is proposed in this review.

Biohybrid sensor for odor detection

Biohybrid odorant sensors that directly integrate a biological olfactory system have been increasingly studied and are suggested to be the next generation of ultrasensitive sensors by taking advantage of the sensitivity and selectivity of living organisms. In this review, we provide a detailed description of the recent developments of biohybrid odorant sensors, especially considering the requisites for their perspective of on-site applications. We introduce the methodologies to effectively capture the biological signals from olfactory systems by readout devices, and describe the essential properties regarding the gaseous detection, stability, quality control, and portability. Moreover, we address the recent progress on multiple odorant recognition using multiple sensors as well as the current screening approaches for pairs of orphan receptors and ligands necessary for the extension of the currently available range of biohybrid sensors. Finally, we discuss our perspectives for the future for the development of practical odorant sensors.

Cell-Based Biohybrid Sensor Device for Chemical Source Direction Estimation

This paper describes a method to estimate the direction from which the signal molecule reaches the sensor by using living cells. In this context, biohybrid sensors that utilize a sophisticated sensing system of cells can potentially offer high levels of chemical-detection sensitivity and selectivity. However, biohybrid-sensor-based chemical-source-direction estimation has not received research attention because the cellular response to chemicals has not been examined in the context of directional information. In our approach, we fabricated a device that can limit the interface between the cell-laden hydrogel and the chemical solution of interest to enhance the time difference over which the chemical solution reaches the cells. Chemical detection by cells that express specific receptors is reflected as the fluorescence of the calcium indicator within the cells. Our device has eight chambers that each house 3D cell-laden collagen hydrogels facing circularly outward. The device also works as a cover to prevent chemicals from permeating the hydrogel from above. In our study, by observing the time course of the fluorescence emission of each chamber, we were able to successfully estimate the chemical-source direction within an error range of 7–13°. Our results suggest that a combination of microstructure devices embedded with living cells can be used to exploit cell functionalities to yield chemical-source directional information.

Microfluidics in Gas Sensing and Artificial Olfaction

Rapid, real-time, and non-invasive identification of volatile organic compounds (VOCs) and gases is an increasingly relevant field, with applications in areas such as healthcare, agriculture, or industry. Ideal characteristics of VOC and gas sensing devices used for artificial olfaction include portability and affordability, low power consumption, fast response, high selectivity, and sensitivity. Microfluidics meets all these requirements and allows for in situ operation and small sample amounts, providing many advantages compared to conventional methods using sophisticated apparatus such as gas chromatography and mass spectrometry. This review covers the work accomplished so far regarding microfluidic devices for gas sensing and artificial olfaction. Systems utilizing electrical and optical transduction, as well as several system designs engineered throughout the years are summarized, and future perspectives in the field are discussed.

Advancements in Microfabricated Gas Sensors and Microanalytical Tools for the Sensitive and Selective Detection of Odors

In recent years, advancements in micromachining techniques and nanomaterials have enabled the fabrication of highly sensitive devices for the detection of odorous species. Recent efforts done in the miniaturization of gas sensors have contributed to obtain increasingly compact and portable devices. Besides, the implementation of new nanomaterials in the active layer of these devices is helping to optimize their performance and increase their sensitivity close to humans' olfactory system. Nonetheless, a common concern of general-purpose gas sensors is their lack of selectivity towards multiple analytes. In recent years, advancements in microfabrication techniques and microfluidics have contributed to create new microanalytical tools, which represent a very good alternative to conventional analytical devices and sensor-array systems for the selective detection of odors. Hence, this paper presents a general overview of the recent advancements in microfabricated gas sensors and microanalytical devices for the sensitive and selective detection of volatile organic compounds (VOCs). The working principle of these devices, design requirements, implementation techniques, and the key parameters to optimize their performance are evaluated in this paper. The authors of this work intend to show the potential of combining both solutions in the creation of highly compact, low-cost, and easy-to-deploy platforms for odor monitoring.

A Colorimetric Artificial Olfactory System for Airborne Improvised Explosive Identification

The detection of ultralow or nonvolatile target analytes remains a significant challenge for artificial olfactory systems even after decades of development, which severely limits their widespread application. To overcome this challenge, an artificial olfactory system based on a colorimetric hydrogel array is constructed for the first time as a universal representative. As an effective extension of conventional artificial olfactory systems that integrates the merits of its predecessors, the proposed system accurately mimics olfactory mucosa and specific odorant binding proteins using hydrogels endowed with specific colorimetric reagents for the detection of hypochlorite, chlorate, perchlorate, urea, and nitrate. Therefore, the proposed system is capable of detecting and discriminating between these five airborne improvised explosive microparticulates with a detection limit as low as 39.4 pg. Additionally, the system demonstrates good reusability over ten cycles, rapid response time of ≈0.2 s, and excellent discrimination properties, despite significant variation. This proof-of-concept study on colorimetric artificial olfactory systems yields a novel strategy for the direct and discriminative detection of nonvolatile airborne microparticulates.

A 3D-Printed Hybrid Nasal Cartilage with Functional Electronic Olfaction

Advances in biomanufacturing techniques have opened the doors to recapitulate human sensory organs such as the nose and ear in vitro with adequate levels of functionality. Such advancements have enabled simultaneous targeting of two challenges in engineered sensory organs, especially the nose: i) mechanically robust reconstruction of the nasal cartilage with high precision and ii) replication of the nose functionality: odor perception. Hybrid nasal organs can be equipped with remarkable capabilities such as augmented olfactory perception. Herein, a proof-of-concept for an odor-perceptive nose-like hybrid, which is composed of a mechanically robust cartilage-like construct and a biocompatible biosensing platform, is proposed. Specifically, 3D cartilage-like tissue constructs are created by multi-material 3D bioprinting using mechanically tunable chondrocyte-laden bioinks. In addition, by optimizing the composition of stiff and soft bioinks in macro-scale printed constructs, the competence of this system in providing improved viability and recapitulation of chondrocyte cell behavior in mechanically robust 3D constructs is demonstrated. Furthermore, the engineered cartilage-like tissue construct is integrated with an electrochemical biosensing system to bring functional olfactory sensations toward multiple specific airway disease biomarkers, explosives, and toxins under biocompatible conditions. Proposed hybrid constructs can lay the groundwork for functional bionic interfaces and humanoid cyborgs.

Bioelectronic sensor mimicking the human neuroendocrine system for the detection of hypothalamic-pituitary-adrenal axis hormones in human blood

In the neuroendocrine system, corticotropin-releasing hormone (CRH) and adrenocorticotropic hormone (ACTH) play important roles in the regulation of the hypothalamic-pituitary-adrenal (HPA) system. Disorders of the HPA system lead to physiological problems, such as Addison's disease and Cushing's syndrome. Therefore, detection of CRH and ACTH is essential for diagnosing disorders related to the HPA system. Herein, receptors of the HPA axis were used to construct a bioelectronic sensor system for the detection of CRH and ACTH. The CRH receptor, corticotropin-releasing hormone receptor 1 (CRHR1), and the ACTH receptor, melanocortin 2 receptor (MC2R), were produced using an Escherichia coli expression system, and were reconstituted using nanodisc (ND) technology. The receptor-embedded NDs were immobilized on a floating electrode of a carbon nanotube field-effect transistor (CNT-FET). The constructed sensors sensitively detected CRH and ACTH to a concentration of 1 fM with high selectivity in real time. Furthermore, the reliable detection of CRH and ACTH in human plasma by the developed sensors demonstrated their potential in clinical and practical applications. These results indicate that CRHR1 and MC2R-based bioelectronic sensors can be applied for rapid and efficient detection of CRH and ACTH.

Pharmacokinetic and pharmacodynamic insights from microfluidic intestine-on-a-chip models

Introduction: After administration, a drug undergoes absorption, distribution, metabolism, and elimination (ADME) before exerting its effect on the body. The combination of these process yields the pharmacokinetic (PK) and pharmacodynamic (PD) profiles of a drug. Although accurate prediction of PK and PD profiles is essential for drug development, conventional in vitro models are limited by their lack of physiological relevance. Recently, microtechnology-based in vitro model systems, termed 'organ-on-a-chip,' have emerged as a potential solution.Areas covered: Orally administered drugs are absorbed through the intestinal wall and transported to the liver before entering systemic circulation, which plays an important role in the PK and PD profiles. Recently developed, chip-based in vitro models can be useful models for simulating such processes and will be covered in this paper.Expert opinion: The potential of intestine-on-a-chip models combined with conventional PK-PD modeling has been demonstrated with promising preliminary results. However, there are several challenges to overcome. Development of the intestinal wall, integration of the gut microbiome, and the provision of an intestine-specific environment must be achieved to realize in vivo-like intestinal model and enhance the efficiency of drug development.

A novel bionic in vitro bioelectronic tongue based on cardiomyocytes and microelectrode array for bitter and umami detection

Electronic tongues (ETs) have been developed and widely used in food, beverage and pharmaceutical fields, but limited in sensitivity and specificity. In recent years, bioelectronic tongues (BioETs) integrating biological materials and various types of transducers are proposed to bridge the gap between ET system and biological taste. In this work, a bionic in vitro cell-based BioET is developed for bitter and umami detection, utilizing rat cardiomyocytes as a primary taste sensing element and microelectrode arrays (MEAs) as a secondary transducer for the first time. The primary cardiomyocytes of Sprague Dawley (SD) rats, which endogenously express bitter and umami taste receptors, were cultured on MEAs. Cells attached and grew well on the sensor surface, and syncytium was formed for potential conduction and mechanical beating, indicating the good biocompatibility of surface coating. The specificity of this BioET was verified by testing different tastants and bitter compounds. The results show that the BioET responds to bitter and umami compounds specifically among five basic tastants. For bitter recognition, only those can activate receptors in cardiomyocytes can be recognized by the BioET, and different bitter substances could be discriminated by principal component analysis (PCA). Moreover, the specific detections of two bitters (Denatonium Benzoate, Diphenidol) and an umami compound (Monosodium Glutamate) were realized with a detection limit of 10^-6 M. The cardiomyocytes-based BioET proposed in this work provides a new approach for the construction of BioETs and has promising applications in taste detection and pharmaceutical study.

A Miniature Gas Sampling Interface with Open Microfluidic Channels: Characterization of Gas-to-Liquid Extraction Efficiency of Volatile Organic Compounds

Chemosensory protein based olfactory biosensors are expected to play a significant role in next-generation volatile organic compound (VOC) detection systems due to their ultra-high sensitivity and selectivity. As these biosensors can perform most efficiently in aqueous environments, the detection systems need to incorporate a gas sampling interface for gas-to-liquid extraction. This interface should extract the VOCs from the gas phase with high efficiency and transfer them into the liquid containing biosensors to enable subsequent detection. To design such a transfer interface, an understanding of the key parameters influencing the gas-to-liquid extraction efficiency of target VOCs is crucial. This paper reports a gas sampling interface system based on a microfluidic open-channel device for gas-to-liquid extraction. By using this device as a model platform, the key parameters dictating the VOC extraction efficiency were identified. When loaded with 30 μL of capture liquid, the microfluidic device generates a gas-liquid interface area of 3 cm² without using an interfacial membrane. The pumpless operation based on capillary flow was demonstrated for capture liquid loading and collection. Gas samples spiked with lipophilic model volatiles (hexanal and allyl methyl sulfide) were used for characterization of the VOC extraction efficiency. Decreasing the sampling temperature to 15 °C had a significant impact on increasing capture efficiency, while variation in the gas sampling flow rate had no significant impact in the range between 40–120 mL min⁻¹. This study found more than a 10-fold increase in capture efficiency by chemical modification of the capture liquid with alpha-cyclodextrin. The highest capture efficiency of 30% was demonstrated with gas samples spiked with hexanal to a concentration of 16 ppm (molar proportion). The approach in this study should be useful for further optimisation of miniaturised gas-to-liquid extraction systems and contribute to the design of chemosensory protein-based VOC detection systems.

Portable biohybrid odorant sensors using cell-laden collagen micropillars

Biohybrid odorant sensors (BOSs) composed of biological materials and artificial detectors have recently attracted much attention due to their high degree of sensitivity and selectivity. Although portability is crucial for the practical use of BOSs on site, the currently used artificial detectors for biological signals are unportable. In this study, we propose a portable cell-based odorant sensor, which uses cell-laden collagen micropillars to compensate the low optical abilities of portable artificial detectors. The micropillars were composed of HEK293T cells expressing olfactory receptors, which emit a fluorescence signal based on the extent of odorant stimulation using a calcium fluorescent indicator. By stacking cells vertically in the micropillars, we achieved different levels of amplification of the fluorescence signals by varying the height of the micropillars. As a working demonstration of the portable BOS, we successfully detected different concentrations of odorants using an inexpensive web camera. The BOS was also able to distinguish the slight differences between an agonist and an antagonist. We believe that the portability of our BOS would facilitate its applications in point-of-care testing and on-site detection of hazardous materials.

Critical review of electronic nose and tongue instruments prospects in pharmaceutical analysis

Electronic nose (enose, EN) and electronic tongue (etongue, ET) have been designed to simulate human senses of smell and taste in the best possible way. The signals acquired from a sensor array, combined with suitable data analysis system, are the basis for holistic analysis of samples. The efficiency of these instruments, regarding classification, discrimination, detection, monitoring and analytics of samples in different types of matrices, is utilized in many fields of science and industry, offering numerous practical applications. Popularity of both types of devices significantly increased during the last decade, mainly due to improvement of their sensitivity and selectivity. The electronic senses have been employed in pharmaceutical sciences for, among others, formulation development and quality assurance. This paper contains a review of some particular applications of EN and ET based instruments in pharmaceutical industry. In addition, development prospects and a critical summary of the state of art in the field were also surveyed.

Visual detection of odorant geraniol enabled by integration of a human olfactory receptor into polydiacetylene/lipid nano-assembly

A new polydiacetylene lipid/human olfactory receptor nano-assembly was fabricated for the visual detection of an odorant for the first time. The assembly consisted of phospholipid-mixed polydiacetylenes (PDAs) and human olfactory receptors (hORs) in detergent micelles. To overcome the limitations of bioelectronic noses, hOR-embedded chromatic complexes (PDA/hORs) were developed, introducing PDAs that showed color and fluorescence transitions against various stimuli. The chromatic nanocomplexes reacted with target molecules, showing a fluorescence intensity increase in a dose-dependent manner and target selectivity among various odorants. As a result, a color transition of the assembly from blue to purple occurred, allowing the visual detection of the odorant geraniol. Through circular dichroism (CD) spectroscopy and a tryptophan fluorescence quenching method, the structural and functional properties of the hORs embedded in the complexes were confirmed. Based on this first work, future array devices, integrating multiple nano-assemblies, can be substantiated and utilized in environmental assessment and analysis of food quality.

Enhanced Gas-Sensing Properties for Trimethylamine at Low Temperature Based on MoO3/Bi2Mo3O12 Hollow Microspheres

Most reported trimethylamine (TMA) sensors have to operate at high temperature, which will consume energy highly. To detect TMA at low temperature, it is necessary to modify the existing materials or develop new materials. In this paper, the sensor based on MoO₃/Bi₂Mo₃O₁₂ hollow microspheres can work at low operating temperature of 170 °C, which were prepared via a simple solvothermal route. The phase and morphology of the product were characterized by an X-ray diffraction meter, a scanning electron microscope and a transmission electron microscope. The surface chemistry of the MoO₃/Bi₂Mo₃O₁₂ sensor was studied with an X-ray photoelectron spectroscope to investigate the TMA sensing mechanism. The MoO₃/Bi₂Mo₃O₁₂ sensor ( S = 25.8) had a higher response to 50 ppm TMA than those of MoO₃ hollow spheres ( S = 10.8) and Bi₂Mo₃O₁₂ sensors ( S = 4.8) at 170 °C. In contrast to the pure MoO₃ and Bi₂Mo₃O₁₂ sensors, the MoO₃/Bi₂Mo₃O₁₂ sensor exhibited an obviously enhanced gas-sensing property for TMA, which might be due to the heterostructure formed between MoO₃ and Bi₂Mo₃O₁₂ and the hollow morphology. It is the first time for MoO₃/Bi₂Mo₃O₁₂ to apply in gas sensors, which might take an important step in the application of MoO₃/Bi₂Mo₃O₁₂ or Bi₂Mo₃O₁₂ in the field of gas sensing.

Carbon Nanotube Chemical Sensors

Carbon nanotubes (CNTs) promise to advance a number of real-world technologies. Of these applications, they are particularly attractive for uses in chemical sensors for environmental and health monitoring. However, chemical sensors based on CNTs are often lacking in selectivity, and the elucidation of their sensing mechanisms remains challenging. This review is a comprehensive description of the parameters that give rise to the sensing capabilities of CNT-based sensors and the application of CNT-based devices in chemical sensing. This review begins with the discussion of the sensing mechanisms in CNT-based devices, the chemical methods of CNT functionalization, architectures of sensors, performance parameters, and theoretical models used to describe CNT sensors. It then discusses the expansive applications of CNT-based sensors to multiple areas including environmental monitoring, food and agriculture applications, biological sensors, and national security. The discussion of each analyte focuses on the strategies used to impart selectivity and the molecular interactions between the selector and the analyte. Finally, the review concludes with a brief outlook over future developments in the field of chemical sensors and their prospects for commercialization.

Evaluation of Three Peptide Immobilization Techniques on a QCM Surface Related to Acetaldehyde Responses in the Gas Phase

The quartz-crystal microbalance is a sensitive and universal tool for measuring concentrations of various gases in the air. Biochemical functionalization of the QCM electrode allows a label-free detection of specific molecular interactions with high sensitivity and specificity. In addition, it enables a real-time determination of its kinetic rates and affinity constants. This makes QCM a versatile bioanalytical screening tool for various applications, with surface modifications ranging from the detection of single molecular monolayers to whole cells. Various types of biomaterials, including peptides mapping the binding sites of olfactory receptors, can be deposited as a sensitive element on the surface of the electrodes. One of key ways to ensure the sensitivity and accuracy of the sensor is provided by application of an optimal and repeatable method of immobilization. Therefore, effective sensors operation requires development of an optimal method of deposition. This paper reviews popular techniques (drop-casting, spin-coating, dip-coating) for coating peptides on piezoelectric crystals surface. Peptide (LEKKKKDC-NH₂) derived from an aldehyde binding site in the HarmOBP7 protein was synthesized and used as a sensing material for the biosensor. The degree of deposition of the sensitive layer was monitoring by variations in the sensors frequency. The highest mass threshold for QCM measurements for peptides was approximately 16.43 µg·mm^-2 for spin coating method. Developed sensor exhibited repeatable response to acetaldehyde. Moreover, responses to toluene was observed to evaluate sensors specificity. Calibration curves of the three sensors showed good determination coefficients (R² > 0.99) for drop casting and dip coating and 0.97 for the spin-coating method. Sensors sensitivity vs. acetaldehyde were significantly higher for the dip-coating and drop-casting methods and lower for spin-coating one.

Progress in the development of olfactory-based bioelectronic chemosensors

Artificial chemosensory devices have a wide range of applications in industry, security, and medicine. The development of these devices has been inspired by the speed, sensitivity, and selectivity by which the olfactory system in animals can probe the chemical nature of the environment. In this review, we examine how molecular and cellular components of natural olfactory systems have been incorporated into artificial chemosensors, or bioelectronic sensors. We focus on the biological material that has been combined with signal transduction systems to develop artificial chemosensory devices. The strengths and limitations of different biological chemosensory material at the heart of these devices, as well as the reported overall effectiveness of the different bioelectronic sensor designs, is examined. This review also discusses future directions and challenges for continuing to advance development of bioelectronic sensors.

Detection of Trimethylamine Based on a Manganese Tetraphenylporphyrin Optical Waveguide Sensing Element

The sensitive detection of trimethylamine has been accomplished by using a homogeneous optical waveguide sensor system. Also the sensor can be easily fabricated by using tetraphenylporphyrin manganese (MnTPP) as sensitive materials to detect different volatile organic compounds (VOC). NMR (¹H-NMR), field-emission scanning electron microscopy (FESEM), and X-ray photoelectron spectroscopy (XPS), infrared (IR), and ultraviolet-visible (UV-vis) instrumental means were used to characterize its structure. Gas-sensing measurements indicated that the sensing element has shown good selectivity, high sensitivity and a low detection limit level of 0.1 ppm to trimethylamine (TMA) with the presence of interference gases at room temperature. For a range of trimethylamine concentrations from 0.1 to 1000 ppm, the sensor has shown a short response time. Also the response time and recovery time are 1.5 and 50 s, respectively. Simulation experiments (dichloromethane, chloroform and carbon tetrachloride were selected as interference gases) showed little interference with its gas sensing. That may provide an ideal candidate for detecting the freshness of fish and seafood.

An overview of an artificial nose system

The present review describes recent advances in the development of an artificial nose system based on olfactory receptors and various sensing platforms. The kind of artificial nose, the production of olfactory receptors, the sensor platform for signal conversion and the application of the artificial nose system based on olfactory receptors and various sensing platforms are presented. The associated transduction modes are also discussed. The paper presents a review of the latest achievements and a critical evaluation of the state of the art in the field of artificial nose systems.

Applications and Advances in Bioelectronic Noses for Odour Sensing

A bioelectronic nose, an intelligent chemical sensor array system coupled with bio-receptors to identify gases and vapours, resembles mammalian olfaction by which many vertebrates can sniff out volatile organic compounds (VOCs) sensitively and specifically even at very low concentrations. Olfaction is undertaken by the olfactory system, which detects odorants that are inhaled through the nose where they come into contact with the olfactory epithelium containing olfactory receptors (ORs). Because of its ability to mimic biological olfaction, a bio-inspired electronic nose has been used to detect a variety of important compounds in complex environments. Recently, biosensor systems have been introduced that combine nanoelectronic technology and olfactory receptors themselves as a source of capturing elements for biosensing. In this article, we will present the latest advances in bioelectronic nose technology mimicking the olfactory system, including biological recognition elements, emerging detection systems, production and immobilization of sensing elements on sensor surface, and applications of bioelectronic noses. Furthermore, current research trends and future challenges in this field will be discussed.

The bioelectronic nose and tongue using olfactory and taste receptors: Analytical tools for food quality and safety assessment

Food intake is the primary method for obtaining energy and component materials in the human being. Humans evaluate the quality of food by combining various facets of information, such as an item of food's appearance, smell, taste, and texture in the mouth. Recently, bioelectronic noses and tongues have been reported that use human olfactory and taste receptors as primary recognition elements, and nanoelectronics as secondary signal transducers. Bioelectronic sensors that mimic human olfaction and gustation have sensitively and selectively detected odor and taste molecules from various food samples, and have been applied to food quality assessment. The portable and multiplexed bioelectronic nose and tongue are expected to be used as next-generation analytical tools for rapid on-site monitoring of food quality. In this review, we summarize recent progress in the bioelectronic nose and tongue using olfactory and taste receptors, and discuss the potential applications and future perspectives in the food industry.

Different Ways to Apply a Measurement Instrument of E-Nose Type to Evaluate Ambient Air Quality with Respect to Odour Nuisance in a Vicinity of Municipal Processing Plants

This review paper presents different ways to apply a measurement instrument of e-nose type to evaluate ambient air with respect to detection of the odorants characterized by unpleasant odour in a vicinity of municipal processing plants. An emphasis was put on the following applications of the electronic nose instruments: monitoring networks, remote controlled robots and drones as well as portable devices. Moreover, this paper presents commercially available sensors utilized in the electronic noses and characterized by the limit of quantification below 1 ppm v/v, which is close to the odour threshold of some odorants. Additionally, information about bioelectronic noses being a possible alternative to electronic noses and their principle of operation and application potential in the field of air evaluation with respect to detection of the odorants characterized by unpleasant odour was provided.

Bioelectronic Nose: An Emerging Tool for Odor Standardization

Odors are perceived differently as a function of individual human experience, and communicating about odors between individuals is therefore very difficult. There is a need to classify and standardize odors, but appropriate tools have not yet been developed. A bioelectronic nose mimics human olfaction and detects target molecules with high sensitivity and selectivity. This new tool has great potential in many applications and is expected to accelerate odor classification and standardization. In particular, a multiplexed bioelectronic nose can provide complex odor information using pattern recognition techniques, and could even reproduce odors via an integrated olfactory display system. We expect that a bioelectronic nose will be a useful tool for odor standardization by providing codes for odors that enable us to communicate odor information.