A double signal electrochemical human immunoglobulin G immunosensor based on gold nanoparticles-polydopamine functionalized reduced graphene oxide as a sensor platform and AgNPs/carbon nanocomposite as signal probe and catalytic substrate

Tri-signal CdS@SiO2 nanoprobes for accurate and sensitive detection of human immunoglobulin G with enhanced flexibility and internal validation

Accurate and sensitive determination of human immunoglobulin G (HIgG) level is critical for diagnosis and treatment of various diseases, including rheumatoid arthritis, humoral immunodeficiencies, and infectious disease. In this study, versatile tri-signal probes were developed by preparing CdS@SiO2 nanorods that integrate photoluminescence (PL), multi-phonon resonant Raman scattering (MRRS) and infrared absorption (IRA) properties. Through the coating of multiple CdS nanoparticles as cores within SiO2 shells, the PL and MRRS properties of CdS were improved, resulting in a significantly lowered limit of detection (LOD), with the lowest LOD of 12.37 ag mL-1. Integration with the distinctive IRA property of SiO2 shells widened the detection range towards higher concentrations, establishing a final linear range of 50 ag mL-1 to 10 μg mL-1. The remarkable consistency among the three signals highlighted the robust internal verification capability for accurate detection. This approach enhances flexibility in selecting detection methodologies to suit diverse scenarios, facilitating HIgG detection. The tri-signal nanoprobes also exhibited excellent detection selectivity, specificity and repeatability. This study presents a fresh idea for developing high-performance detection strategies.

Cubic Na0.5Bi0.5TiO3 nanoperovskite significantly expands the application of sensitive immunosensor for the detection of carcinoembryonic antigen

Nanosized sodium bismuth perovskite titanate (NBT) was synthesized and first used as the electrochemical immune sensing platform for the sensitive detection of carcinoembryonic antigen (CEA). Gold nanoparticles (Au NPs) grew on the surface of NBT through forming Au-N bond to obtain Au@NBT, and a label-free electrochemical immunosensor was proposed using Au@NBT as an immunosensing recognizer towards CEA. The well-ordered crystal structure of NBT was not changed at all after the modification of Au NPs outside, but significantly improved the conductivity, catalytic activity, and biocompatibility of the Au@NBT-modified electrode. The unique cubic crystal nanostructure of NBT offered a large active area for both Au NP modification and the subsequent immobilization of biomolecules over the electrode surface, triggering the effective generation of promising properties of the proposed Au@NBT-based electrochemical immunosensor. As expected, favorable detection performances were achieved using this immunosensor towards CEA detection, where a good linear relationship between the current response and CEA concentration was obtained in the concentration range 10 fg mL-1 to 100 ng mL-1 with a low detection limit (LOD) of 13.17 fg mL-1. Also, the significantly enhanced selectivity, and stability guaranteed the promising electrochemical properties of this immunosensor. Furthermore, the analysis of real serum samples verified the high feasibility of this new method in clinical CEA detection. This work opens a new window for the application of nanoperovskite in the early detection of CEA.

Bovine Serum Albumin Template-Mediated Fabrication of Ruthenium Dioxide/Multiwalled Carbon Nanotubes: High-Performance Electrochemical Dopamine Biosensing in Human Serum

The presence of abnormal dopamine (DA) levels may cause serious neurological disorders, therefore, the quantitative analysis of DA and its related research are of great significance for ensuring health. Herein, the bovine serum albumin (BSA) template method has been proposed for the preparation of catalytically high-performance ruthenium dioxide/multiwalled carbon nanotube (RuO2/MWCNT) nanocomposites. The incorporation of MWCNTs has improved the active surface area and conductivity while effectively preventing the aggregation of RuO2 nanoparticles. The outstanding electrocatalytic performance of RuO2/MWCNTs has promoted the electro-oxidation of DA at neutral pH. The electrochemical sensing platform based on RuO2/MWCNTs has demonstrated a wide linear range (0.5 to 111.1 μM), low detection limit (0.167 μM), excellent selectivity, long-term stability, and good reproducibility for DA detection. The satisfactory recovery range of 94.7% to 103% exhibited by the proposed sensing podium in serum samples signifies its potential for analytical applications. The aforementioned results reveal that RuO2/MWCNT nanostructures hold promising aptitude in the electrochemical sensor to detect DA in real samples, further offering broad prospects in clinical and medical diagnosis.

Ca@Cu-CD nanoprobe for dual detection of glycine and ex vivo glycine imaging

Hydrothermally prepared copper-doped carbon dots (Cu-CDs) were modified with Ca2+, which serve as an excellent platform for the recognition of glycine. The feeble emission of Ca@Cu-CD increases substantially in the presence of glycine due to aggregation-induced emission. At the same time, there was a 5-fold increase in the current response of the Ca@Cu-CD modified electrode as compared to the control. The exceptional combination of fluorescence and conducting properties, along with Ca-glycine interaction, establishes our probe as a dual sensor for the detection of glycine in real serum samples. The limit of detection for this nonenzymatic fluorescence and electrochemical sensing are 17.2 and 4.1 nM, respectively. Furthermore, an extensive evaluation of the toxicity and bioimaging properties in fruit fly Drosophila melanogaster shows that the Ca@Cu-CD probe is not cytotoxic and can be applied for ex vivo imaging of glycine.

Bio-inspired polynorepinephrine based nanocoatings for reduced graphene oxide/gold nanoparticles composite for high-performance biosensing of Mycobacterium tuberculosis

Polydopamine (PDA) has established itself as a promising grafting and coating material, particularly for functional group-deprived electrochemically active nanomaterials such as graphene, MXene, CNT, metal nanoparticles, and so on, and has proven its extensive applicability in the design and development of electrochemical biosensor devices. However, polynorepinephrine (PNE), a sister compound of PDA, having additional -OH groups and greater coating uniformity and biocompatibility, has never been studied in the field of biosensors. Herein, we investigated PNE as a coating material for reduced graphene oxide (RGO) and gold nanoparticles (Au) in order to build an electrochemical genosensor for Mycobacterium tuberculosis (MTB) detection. Biotin-Avidin chemistry was used to covalently immobilize probe DNA (ssDNA) specific to MTB to the nanocomposite surface on glassy carbon electrode (GCE) in order to construct biosensing electrodes. The formation of RGO/PNE and RGO/PNE/Au nanocomposite as well as the immobilization of ssDNA onto the bioelectrodes are both corroborated by UV-Visible, Raman, and XRD studies with FE-SEM and HR-TEM analysis. The electrochemical studies performed using cyclic voltammetry (CV) and linear sweep voltammetry (LSV) showed the significant enhancement in charge transfer kinetics of RGO/PNE/GCE and RGO/PNE/Au/GCE electrode compared to GO/GCE electrode. The biosensing investigations performed using ssDNA/avidin/RGO/PNE/Au/GCE bioelectrode showed high sensitivity (2.3 × 10^-3 mA μM^-1), low detection limit (0.1 × 10^-7 μM), broad detection range (0.1 × 10^-2 to 0.1 × 10^-7 μM) with good selectivity and low response time (5 s) of the developed sensor. In comparison to the analogous RGO/PDA/Au material system, RGO/PNE/Au demonstrated increased enzyme loading, improved electrochemical responsiveness, and superior biosensing performance.

A dual-modality immunosensor for simple and reliable detection of nitrated alpha-synuclein in serum based on silver-coated MOF

Nitrated α-syn (nitro-α-syn) is a biomarker for Parkinson's desease (PD), and its sensitive detection in serum is of great importance for early PD diagnosis. Silver-coated copper MOF (Cu-MOF@Ag) with outstanding oxidase activity and electrochemical response property was designed and synthesized. Cu-MOF@Ag exhibited excellent oxidase activity with a low K_m value (0.568 mM), avoiding the addition of strong oxidant to catalyze chromogenic substrate, which enhanced the colorimetric stability. Silver nanoparticles as an electrochemical signal reporter can be easily decorated on the surface of Cu-MOF with bifunctional groups (-SH and -NH₂) material, which can increase the electrochemical signal output. The α-syn antibody modified Cu-MOF@Ag and nitro-α-syn modified magnetic nanoparticle were used as immunoprobes to specifically capture nitro-α-syn. A dual-modal immunosensor was fabricated for the simple and reliable detection of nitro-α-syn based on Cu-MOF@Ag. Combing colorimetric and electrochemical detection, nitro-α-syn can be determined quantitatively within a wide linear range (10-350 ng/mL) with low detection limit (0.5 ng/mL). The ability of the sensor with magnetic separation and dual signal analysis allowed to successfully detect nitro-α-syn and distinguish PD patients from healthy people (P < 0.005). Thanks to its excellent selectivity, stability, and the precision of 2.69%, the dual-modal sensor has potential clinical application for nitro-α-syn detection and paves a new way for PD diagnosis at its early stage.

A portable electrochemical sensing platform for serotonin detection based on surface-modified carbon fiber microelectrodes

Serotonin (5-HT) is one of the key neurotransmitters in the human body, regulating numerous physiological functions. A disruption in 5-HT homeostasis could result in serious health problems, including neurodegenerative disorders, depression, and 5-HT syndrome. Detection of 5-HT concentrations in biological fluids, such as urine, is a potential solution for early diagnosis of these diseases. In this study, we developed a novel, simple, and low-cost electrochemical sensing platform consisting of a portable workstation with customized electrodes for 5-HT detection in artificial biological fluids. Nafion/carbon nanotubes (CNTs) and electrochemically modified carbon fiber microelectrodes (Nafion-CNT/EC CFMEs) displayed improved 5-HT sensitivity and selectivity. Together with a customized Ag/AgCl reference electrode and Pt counter electrode, the portable 5-HT sensing platform had a sensitivity of 0.074 μA μM^-1 and a limit of detection (LOD) of 140 nM. This system was also assessed to measure 5-HT spiked in artificial urine samples, showing nearly full recovery rates. These satisfactory results demonstrated that the portable system exhibits outstanding performance and confirmed the feasibility of 5-HT detection, which can be used to provide point-of-care analysis in actual biological samples.

An ultrasensitive immunosensor based on cellulose nanofibrils/polydopamine/Cu-Ag nanocomposite for the detection of AFP

In this work, an ultrasensitive immunosensor for amperometric determination of alpha-fetoprotein (AFP) was developed utilizing Ag and Cu nanoparticles on polydopamine (PDA) functionalized cellulose nanofibrils (CNFs) composite (CNFs/PDA/Cu-Ag) as signal amplifier. PDA was first prepared by self-polymerizing of dopamine, and then was adsorbed on CNFs. The obtained CNFs/PDA was applied as substrate to electrolessly deposit Cu-Ag nanoparticles, using NaBH₄ as reducing agent. The structure and morphology of the synthesized CNFs/PDA/Cu-Ag nanocomposite were analyzed through Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, X-ray powder diffraction, scanning electron microscopy, particle size analyzer and transmission electron microscopy. The CNFs/PDA/Cu-Ag modified glassy carbon electrode can fix AFP antibody (Ab), and further capture AFP specifically. Electrochemical impedance spectroscopy and cyclic voltammetry were used to characterize the assembly process of immunosensor. The immunoreaction was amplified by electrocatalytical reduction of H₂O₂ on Cu-Ag nanoparticles, through which AFP was quantitatively detected. The developed sensor exhibits wide linear range of 0.01-100 ng mL^-1 (R² = 0.9963) with low detection limit of 4.27 pg mL^-1 (S/N = 3). In addition, it has been used for the detection of AFP in human serum, manifesting its preeminent application prospect in early liver cancer diagnosis.

Highly Stable Buffer-Based Zinc Oxide/Reduced Graphene Oxide Nanosurface Chemistry for Rapid Immunosensing of SARS-CoV-2 Antigens

The widespread and long-lasting effect of the COVID-19 pandemic has called attention to the significance of technological advances in the rapid diagnosis of SARS-CoV-2 virus. This study reports the use of a highly stable buffer-based zinc oxide/reduced graphene oxide (bbZnO/rGO) nanocomposite coated on carbon screen-printed electrodes for electrochemical immuno-biosensing of SARS-CoV-2 nuelocapsid (N-) protein antigens in spiked and clinical samples. The incorporation of a salt-based (ionic) matrix for uniform dispersion of the nanomixture eliminates multistep nanomaterial synthesis on the surface of the electrode and enables a stable single-step sensor nanocoating. The immuno-biosensor provides a limit of detection of 21 fg/mL over a linear range of 1-10 000 pg/mL and exhibits a sensitivity of 32.07 ohms·mL/pg·mm² for detection of N-protein in spiked samples. The N-protein biosensor is successful in discriminating positive and negative clinical samples within 15 min, demonstrating its proof of concept used as a COVID-19 rapid antigen test.

Integrated electrochemical microfluidic sensor with hierarchically porous nanoarrays modified graphene fiber microelectrode for bioassay

The development of high-efficient biosensing systems for rapid and sensitive detection of disease-related biomarkers in human samples is of great significance for disease diagnosis and treatment in clinical practice. In this work, we develop an integrated electrochemical microfluidic sensing platform based on freestanding graphene fiber (GF) microelectrode for bioassay. In order to improve the electrocatalytic activity of GF microelectrode, it has been modified by unique 3D well-ordered hierarchically porous nickel-cobalt phosphide (NiCoP) nanosheet arrays (NSAs). Benefiting from the excellent electrochemical properties and structural merits, the resultant NiCoP-NSAs modified GF microelectrode shows excellent sensing performances towards neurotransmitter dopamine (DA), with a high sensitivity of 5.56 μA cm^-2 μM^-1, a low detection limit of 14 nM, as well as good selectivity, reproducibility and stability. Furthermore, in virtue of the miniaturized size and good mechanical properties, the nanohybrid GF microelectrode can be embedded into a home-made microfluidic chip to construct an integrated electrochemical microfluidic sensing device, which has been used for sensitive analysis of DA in minimal volume of human serum and urine samples, and in situ tracking DA released from neuroblastoma cells SHSY-5Y under the stimulation for physio-pathological and pharmacological study of nervous system-related diseases.

Rapid and Direct Perfluorooctanoic Acid Sensing with Selective Ionomer Coatings on Screen-Printed Electrodes under Environmentally Relevant Concentrations

Per- and polyfluoroalkyl substances (PFASs) pose a significant health threat to humans at trace levels. Because of its ubiquity across the globe, there have been intense efforts to rapidly quantify PFASs in the environment while also mitigating their release. This work reports an electrochemical sensor with a selective perfluorinated anion exchange ionomer (PFAEI) coating for direct sensing of perfluorooctanoic acid (PFOA)-a type of PFAS. Notably, the sensor operates without the need of redox probes and has a limit of detection around 6.51 ± 0.2 ppb (15 nM) in buffered deionized water and drinking water. By testing the sensor with different ionomer electrode coatings, it was inferred that the PFAEI favors PFOA anions over other competing anions in solution through a combination of electrostatic and van der Waal interactions.

Electrochemical Synthesis of Zinc Oxide Nanostructures on Flexible Substrate and Application as an Electrochemical Immunoglobulin-G Immunosensor

Immunoglobulin G (IgG), a type of antibody, represents approximately 75% of serum antibodies in humans, and is the most common type of antibody found in blood circulation. Consequently, the development of simple, fast and reliable systems for IgG detection, which can be achieved using electrochemical sandwich-type immunosensors, is of considerable interest. In this study we have developed an immunosensor for human (H)-IgG using an inexpensive and very simple fabrication method based on ZnO nanorods (NRs) obtained through the electrodeposition of ZnO. The ZnO NRs were treated by electrodepositing a layer of reduced graphene oxide (rGO) to ensure an easy immobilization of the antibodies. On Indium Tin Oxide supported on Polyethylene Terephthalate/ZnO NRs/rGO substrate, the sandwich configuration of the immunosensor was built through different incubation steps, which were all optimized. The immunosensor is electrochemically active thanks to the presence of gold nanoparticles tagging the secondary antibody. The immunosensor was used to measure the current density of the hydrogen development reaction which is indirectly linked to the concentration of H-IgG. In this way the calibration curve was constructed obtaining a logarithmic linear range of 10–1000 ng/mL with a detection limit of few ng/mL and good sensitivity.

An immunoassay based on nanomotor-assisted electrochemical response for the detection of immunoglobulin

An immunoassay strategy has been developed based on nanomotor-assisted electrochemical measurements for simple and sensitive detection of immunoglobulin (IgG). The self-propelled Fe₃O₄@SiO₂/Pt nanomotors were designed to label primary antibodies IgG (nanomotor-label) for the "on-the-fly" binding of the immune-protein. The core shell Au@Ag nanocubes (Au@Ag NCs) were used as labels of secondary antibodies (Au@Ag NCs-Ab₂) to amplify electrochemical signal related to antigen concentration derived from the oxidation of Ag. The self-propelled nanomotors autonomously move in the solution to cruise and capture IgG and Au@Ag NCs-Ab₂, resulting in the self-assembly of sandwich immune-complex. Finally, the immune-complex with magnetism can be transferred and modified on the electrode for the detection of IgG via differential pulse voltammetry. The self-propelled motion of the nanomotor-label obviates common procedures for the self-assembly of sandwich immunosensors to achieve satisfactory analysis results. With advantages of automation and miniaturization, the strategy based on self-propelled nanomotor-labels explores an effective method for the simple and sensitive detection of immune-protein in biosensing.

Sandwich-type electrochemical aptasensor based on hollow mesoporous carbon spheres loaded with porous dendritic Pd@Pt nanoparticles as signal amplifier for ultrasensitive detection of cardiac troponin I

Signal amplification is crucial to improve the sensitivity for the electrochemical detection of cardiac troponin I (cTnI), one of the ideal biomarkers for early acute myocardial infarction (AMI) diagnosis. Herein, we developed a novel signal amplification strategy to construct a sandwich-type electrochemical aptasensor for the detection of cTnI. Core-shell Pd@Pt dendritic bimetallic nanoparticles loaded on melamine modified hollow mesoporous carbon spheres (Pd@Pt DNs/NH₂-HMCS) was prepared as labels to conjugate with thiol-modification DNA aptamers probe for signal amplification. While introducing numerous amino groups, the melamine functionalized hollow mesoporous carbon spheres (NH₂-HMCS) retained the edge-plane-like defective sites for the adhesion and electrocatalytic reduction of H₂O₂. With the unique characteristics of NH₂-HMCS, it not only enhanced the dispersity and loading capacity of core-shell Pd@Pt dendritic bimetallic nanoparticles (Pd@Pt DNs), but also improved the stability of bonding by the affinity interaction between Pd@Pt DNs and amino groups of melamine. Meanwhile, the synergistic catalysis effect between Pd@Pt DNs and NH₂-HMCS significantly enhanced the electrocatalytic reduction of H₂O₂ and further amplified the signal. Under optimal conditions, this recommended aptasensor for cTnI detection displayed a wide dynamic range from 0.1 pg/mL to 100.0 ng/mL and a low detection limit of 15.4 fg/mL (S/N = 3). The sensor also successfully realized the analysis of cTnI-spiked human serum samples, meaning potential applications in AMI diagnosis.

Recent advances in dopamine-based materials constructed via one-pot co-assembly strategy

Dopamine-based materials have attracted widespread interest due to the outstanding physicochemical and biological properties. Since the first report on polydopamine (PDA) films, great efforts have been devoted to develop new fabrication strategies for obtaining novel nanostructures and desirable properties. Among them, one-pot co-assembly strategy offers a unique pathway for integrating multiple properties and functions into dopamine-based platform in a single simultaneous co-deposition step. This review focuses on the state of the art development of one-pot multicomponent self-assembly of dopamine-based materials and summarizes various single-step co-deposition approaches, including PDA-assisted adaptive encapsulation, co-assembly of dopamine with other molecules through non-covalent interactions or covalent interactions. Moreover, emerging applications of dopamine-based materials in the fields ranging from sensing, cancer therapy, catalysis, oil/water separation to antifouling are outlined. In addition, some critical remaining challenges and opportunities are discussed to pave the way towards the rational design and applications of dopamine-based materials.

Gold Nanoparticles: Multifaceted Roles in the Management of Autoimmune Disorders

Gold nanoparticles (GNPs) have been recently applied for various diagnostic and therapeutic purposes. The unique properties of these nanoparticles (NPs), such as relative ease of synthesis in various sizes, shapes and charges, stability, high drug-loading capacity and relative availability for modification accompanied by non-cytotoxicity and biocompatibility, make them an ideal field of research in bio-nanotechnology. Moreover, their potential to alleviate various inflammatory factors, nitrite species, and reactive oxygen production and the capacity to deliver therapeutic agents has attracted attention for further studies in inflammatory and autoimmune disorders. Furthermore, the characteristics of GNPs and surface modification can modulate their toxicity, biodistribution, biocompatibility, and effects. This review discusses in vitro and in vivo effects of GNPs and their functionalized forms in managing various autoimmune disorders (Ads) such as rheumatoid arthritis, type 1 diabetes, and multiple sclerosis.

A highly selective and stable cationic polyelectrolyte encapsulated black phosphorene based impedimetric immunosensor for Interleukin-6 biomarker detection

Due to the insufficiency of binding sites for the immobilized recognition biomolecules on the immunosensing platform, cancer detection becomes challenging. Whereas, the degradation of black phosphorene (BP) in the presence of the environmental factors becomes a concerning issue for use in electrochemical sensing. In this study, BP is successfully encapsulated by polyallylamine (PAMI) to increase its stability as well as to enhance its electrochemical performance. The successful encapsulation of BP is ensured through X-ray Photoelectron spectroscopy and Raman spectroscopy, whereas the stability of black phosphorus is ensured by Zeta potential measurements and cyclic voltammetry tests. The developed BP-PAMI composite showed high stability in the ambient environment and exhibited improved electrochemical performances. The impedimetric immunosensor was developed on a BP-PAMI modified laser burned graphene (LBG) to detect interleukin-6 biomarkers using electrochemical impedance spectroscopy (EIS). Under the optimized parameters, the fabricated immunosensor demonstrated a wide linear range of 0.003-75 ng/mL, limit of detection (LOD) of 1 pg/mL. Based on the experimental analysis, the developed sensing strategy can be employed as an easy, disposable, cost-effective and highly selective point-of-care cancer detection. In addition, the developed technique can be applied broadly for detecting other biomarkers after treating with suitable biomolecules.

Alkaline Phosphatase-Triggered Etching of Au@FeOOH Nanoparticles for Enzyme Level Assay under Dark-Field Microscopy

In clinical diagnosis, the level of biological enzymes in serum has been generally regarded as markers of human diseases. In this work, a kind of simple and sensitive plasmonic probe (indicated as Au@FeOOH) has been synthesized with the guidance of plasmonic imaging and subsequently developed for the alkaline phosphatase (ALP) level detection under dark-field microscopy (DFM). As a kind of hydrolysis enzyme, ALP can promote the hydrolysis of l-ascorbic acid 2-phosphate to ascorbic acid (AA). AA further acts as a strong reduction reagent for the decomposition of the FeOOH shell, which results in a blue shift of localized surface plasmon resonance spectra and an obvious color change under DFM. RGB analyses show that using a ΔR/G value instead of scattering wavelength or R/G value as the analytical signal, the deviation attributed to the size distribution of the initial Au NPs is greatly suppressed, and a linear range from 0.2 to 6.0 U/L (R² = 0.99) and a limit of detection of 0.06 U/L are acquired with various concentrations of ALP during the detection. Besides, this approach exhibits excellent selectivity in complex biological serum samples, which is expected to be applied for the early diagnosis of clinical diseases by monitoring various biomarkers in the future.

DNA cyclic assembling control in an electrochemical strategy with MoS2@AuNPs for determination of kanamycin

A sensitive electrochemical strategy was established for kanamycin determination. A specific aptamer was modified on the electrode as the probe, followed by a cyclic hybridization chain reaction (HCR) with methylene blue, causing an increasing signal response. In the presence of kanamycin, it can initiatively convolve the aptamer and prevent further DNA assembling, resulting in a signal distinction sensitive to the target amount. However, the signal reproducibility is low. To improve the precision, the HCR procedure was investigated. The results demonstrated that the optimal amount of assembled DNA is 12-fold to that of aptamer. This amount was then controlled in further assays. Admittedly, controlled DNA assembling commonly indicates a limited signal amplification. To further enhance the sensitivity, a nanocomposite based on MoS₂ and AuNPs was modified on the electrode. The results of the assay proved that the signal distinction sensitive to target amount increased by 50%. A linearity range is obtained from 0.01 nM to 1.0 μM of kanamycin, and the LOD is 8.4 pM. Subsequently, this strategy was employed to detect kanamycin in chicken liver and milk sample; the recovery results suggest that it possess a satisfactory application prospect in analysis of agricultural products.

Meso-tetra(4-sulfonatophenyl)porphyrin silver/Ag nanoparticles/graphene-phase C3N4 with a sandwich-like structure and double-faced active centers via two-step room-temperature photocatalytic synthesis for ractopamine detection

Photochemical synthesis under visible light irradiation is a novel approach in the field of green chemistry, and composites with abundant active centers for electrochemical detection are highly attractive. Herein, a meso-tetra(4-sulfonatophenyl)porphyrin silver/Ag nanoparticles/graphene phase C₃N₄ nanosheets (Ag₂TPPS₄/AgNPs/ng-C₃N₄) material with a sandwich-like structure was synthesized using a two-step photocatalytic reaction at room temperature (25 °C). In the first visible light irradiation step and in the presence of a hole capture agent, Ag⁺ ions were photocatalytically reduced onto the surface of ng-C₃N₄ that was used as a photocatalyst. Then, the protons (H⁺) in the core of H₂TPPS₄ were substituted in situ by photo-oxidized Ag⁺ during the second visible light irradiation step and in the presence of an electron capture agent. The electrochemical response of Ag₂TPPS₄ and ng-C₃N₄ to ractopamine (RAC) results in the unique double-faced active centers of Ag₂TPPS₄/AgNPs/ng-C₃N₄, and the cores (AgNPs) are beneficial as bridges for the connection between Ag₂TPPS₄ and ng-C₃N₄ and for high-efficiency electron transfer. Hence, as-synthesized Ag₂TPPS₄/AgNPs/ng-C₃N₄ exhibits high sensitivity (a low detection limit of 5.1 × 10^-8 M, S/N = 3.0), a wide linear range (1 × 10^-7 to 1.2 × 10^-5 M), and long-term stability. Based on the experimental verification of the electrochemical dynamics and electrostatic attraction at the interface between the dual-active-center surface and RAC, the electrochemical mechanism has been clarified. Specifically, in the multi-cycle oxidation of RAC, the blue shift of specific UV-vis peaks also confirms the electrocatalytic oxidation of the two terminal hydroxyl groups of RAC. In brief, Ag₂TPPS₄/AgNPs/ng-C₃N₄ with a sandwich-like structure and double-faced active centers enhances the detection sensitivity and electrocatalytic efficiency towards RAC.

AuNP array coated substrate for sensitive and homogeneous SERS-immunoassay detection of human immunoglobulin G

Owing to the high sensitivity, fast responsiveness and high specificity, immunoassays using surface-enhanced Raman scattering (SERS) as the readout signal displayed great potential in disease diagnosis. In this study, we developed a SERS-immunoassay method for the detection of human immunoglobulin G (HIgG). Upon involving well-ordered AuA on a SERSIA substrate, the LSPR effect was further enhanced to generate a strong and uniform Raman signal through the formation of sandwich structure with the addition of target HIgG and SERSIA tag. Optimization of the assay provided a wide linear range (0.1–200 μg mL⁻¹) and low limit of detection (0.1 μg mL⁻¹). In addition, the SERS-immunoassay method displayed excellent specificity and was homogeneous, which guaranteed the practical use of this method in the quantitative detection of HIgG. To validate this assay, human serum was analysed, which demonstrated the potential advantages of SERS-immunoassay technology in clinical diagnostics.

An AuNP array coated substrate was developed for the SERS-immunoassay detection of human immunoglobulin G.

A novel electrochemical immunosensor for the sensitive detection of tiamulin based on staphylococcal protein A and silver nanoparticle-graphene oxide nanocomposites

Tiamulin (TML) is a pleuromutilin antibiotic and mainly used to treat pulmonary and gastrointestinal infections. However, excessive use of TML can bring health threats to consumers. In this work, a label-free electrochemical immunosensor was proposed for sensitive detection of TML in pork and pork liver. Silver nanoparticles (AgNPs) were synthesized in situ on graphene oxide (GO), in which GO acted as a carrier for loading more AgNPs and AgNPs exhibited both strong conductivity and good redox property. In addition, staphylococcal protein A (SPA) was applied to oriented immobilization of fragment crystallizable (Fc) region of the TML monoclonal antibody. Under the optimal condition, the developed electrochemical immunosensor exhibited a good linear response with a concentration of TML ranging from 0.05 ng mL^-1 to 100 ng mL^-1 and the limit of detection (LOD) was 0.04 ng mL^-1. Furthermore, the designed immunosensor was applied to detect TML in real samples with a good accuracy. Therefore, the label-free electrochemical immunosensor could be used as a potential method to detect TML and other antibiotic residues in animal derived foods.

Quantitative determination of creatinine from serum of prostate cancer patients by N-doped porous carbon antimony (Sb/NPC) nanoparticles

Creatinine is an indicator of hindrance in urination and renal insufficiency. Creatinine levels are the marker of the late stages of prostate cancer. Early and sensitive detection of creatinine can reduce deaths associated with prostate cancer. In this work, nitrogen-doped porous carbon antimony (Sb/NPC) nanoparticles are fabricated to be employed as a non-enzymatic biosensor. Sb/NPC has promising redox activity and is synthesized by a two-step reaction using low-cost precursors. Electrochemical sensing by Sb/NPC is conducted for standard creatinine solutions on a three-electrodes system. Cyclic voltammetry, amperometry, and electrochemical impedance spectroscopy are used to sense creatinine. LOD and LOQ of the Sb/NPC modified electrode are 0.74 µM and 2.4 µM, respectively. This electrode system analyzes creatinine in the serum of prostate cancer patients who have elevated PSA levels. More than 90% creatinine is recovered from a spiked serum sample of a prostate cancer patient. A direct relation is observed between PSA levels and creatinine levels in prostate cancer. The developed cyclic voltammetric setup detects trace concentrations of creatinine in serum.

Bioconjugation of 2-arachidonoyl glycerol (2-AG) biotinylated antibody with gold nano-flowers toward immunosensing of 2-AG in human plasma samples: A novel immuno-platform for the screening of immunomodulation and neuroprotection using biosensing

Human 2-arachidonoylglycerol (2-AG) is an agonist of endocannabinoid system and acts as an important modulator of many physiological processes such as emotional state and pain sensation. Identification and quantification of 2-AG is vital for medical and pathological processes. There are no reports on the measurement of 2-AG in human biofluids using modern methods such as biosensors. This study reports an ultra-sensitive and selective immunosensor to determine endocannabinoids 2-AG in human plasma samples. In this study, gold nano-flowers (AuNFs) were synthesized and conjugated with a specific biotinylated antibody of 2-AG. Bioconjugated composite (bioreceptor with AuNFs) was immobilized on the surface of a gold electrode and used for the monitoring of the antigen (target molecules) based on the immunoreaction process. Moreover, a constructed interface was characterized by field-emission scanning electron microscopy (FE-SEM), dynamic light scattering (DLS), transmission electron microscopy (TEM) and zeta potential methods. Using the proposed immuno-platform, 2-AG was determined in two dynamic ranges of 0.00024-0.0078 ng L-1 and 2-16 ng L-1 with a lower limit of quantitation (LLOQ) of 0.00024 ng L-1. These results suggest that our immunosensor might be appropriate for an early diagnosis of 2-AG towards the screening of immunomodulatory activity and neuroprotection.

Nanostructured graphitic carbon nitride based ultrasensing electrochemical biosensor for food toxin detection

We report results of the studies related to the fabrication of thionine functionalized graphitic carbon nitride nanosheets based ultrasensing platform for food toxin (Aflatoxin B1, AfB₁) detection. The synthesis of graphitic carbon nitride nanosheets (g-C₃N₄) was carried out by polycondensation of melamine followed by chemical exfoliation. Further, thionine was used for the functionalization of g-C₃N₄ (Thn/g-C₃N₄) and deposited electrophoretically onto the indium tin oxide (ITO) coated glass electrode. The fabricated Thn/g-C₃N₄/ITO electrode was covalently immobilized by EDC-NHS chemistry with anti-aflatoxin B1 (anti-AfB₁) followed by blocking of non-specific sites using BSA molecules. For structural, morphological, functional and electrochemical properties analysis of synthesized nanomaterials and fabricated electrodes X-ray diffraction, scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, atomic force microscopy and cyclic voltammetry techniques were used. The electrochemical response studies of the fabricated biosensing platform (BSA/anti-AfB₁/Thn/g-C₃N₄/ITO) were carried out towards detection of AfB₁ antigen using cyclic voltammetry technique. The obtained electrochemical results indicate that the fabricated biosensing electrode having ability to detect AfB₁ with lower limit of detection of 0.328 fg mL^-1, linear detection range in between 1 fg mL^-1 to 1 ng mL^-1, sensitivity of 4.85 μA log [ng^-1 mL] cm^-2 with stability upto 7 weeks.

Polydopamine-based nanomaterials and their potentials in advanced drug delivery and therapy

Polydopamine (PDA) has shown great potentials in biomedical fields due largely to its unique physicochemical properties, including high photothermal transfer efficiency, excellent drug binding capacity, versatile adhesion ability, sensitive pH responsibility and great biocompatibility and biodegradability. These properties confer PDA-based nanoparticles the potentials either as the drug carriers for advanced drug delivery or as the bioactive agents for photothermal therapy, imaging and biosensing. This review aims to provide a comprehensive understanding of PDA, its polymerization mechanisms and the potentials of PDA-based nano-systems in treating various diseases, including cancer, diabetes, inflammation, bacterial infection and Parkinson's disease. In addition, the concerns of PDA in biomedical use are also discussed.

Polydopamine/graphene/MnO2 composite-based electrochemical sensor for in situ determination of free tryptophan in plants

The in vivo detection of small active molecules in plant tissues is essential for the development of precision agriculture. Tryptophan (Trp) is an important precursor material for auxin biosynthesis in plants, and the detection of Trp levels in plants is critical for regulating the plant growth process. In this study, an electrochemical plant sensor was fabricated by electrochemically depositing a polydopamine (PDA)/reduced graphene oxide (RGO)-MnO₂ nanocomposite onto a glassy carbon electrode (GCE). PDA/RGO-MnO₂/GCE exhibited high electrocatalytic activity for the oxidation of Trp owing to the combined selectivity of PDA and catalytic activity of RGO-MnO₂. To address the pH variability of plants, a reliable Trp detection program was proposed for selecting an appropriate quantitative detection model for the pH of the plant or plant tissue of interest. Therefore, a series of linear regression curves was constructed in the pH range of 4.0-7.0 using the PDA/RGO-MnO₂/GCE-based sensor. In this pH range, the linear detection range of Trp was 1-300 μM, the sensitivity was 0.39-1.66 μA μM^-1, and the detection limit was 0.22-0.39 μM. Moreover, the practical applicability of the PDA/RGO-MnO₂/GCE-based sensor was successfully demonstrated by determining Trp in tomato fruit and juice. This sensor stably and reliably detected Trp levels in tomatoes in vitro and in vivo, demonstrating the feasibility of this research strategy for the development of electrochemical sensors for measurements in various plant tissues.

Convenient synthesis of three-dimensional hierarchical CuS@Pd core-shell cauliflowers decorated on nitrogen-doped reduced graphene oxide for non-enzymatic electrochemical sensing of xanthine

A novel hybrid with three-dimensional (3D) hierarchical CuS@Pd core-shell cauliflowers decorated on nitrogen-doped reduced graphene oxide (CuS@Pd/N-RGO) has been prepared by a facile wet-chemical route without utilizing any template molecules and surfactants. The characterization results reveal that the 3D flower-like structure of CuS "core" is composed of interconnecting nanoplates, which is conductive to the loading of Pd nanoparticles' "shell" and results in the robust interaction between the core and shell for the formation of CuS@Pd cauliflowers. Anchoring such appealing CuS@Pd cauliflowers on the two-dimensional N-RGO can efficaciously inhibit the aggregation of CuS@Pd cauliflowers and accelerate the kinetics of xanthine oxidation. Benefiting from the multi-functional properties and unique morphology, the sensor constructed by CuS@Pd/N-RGO exhibits excellent performance for non-enzymatic detection of xanthine including a wide detection range of 0.7-200.0 μM (0.94 V vs. SCE), a low detection limit of 28 nM (S/N = 3), high reproducibility (relative standard deviation (RSD) = 4.1%), and commendable stability (retained 90% of the initial electrochemical responses after storage for 30 days), which is amongst the best of various electrochemical sensors reported for xanthine assays till date. Reliable and satisfying recoveries (95-105%, RSD ≤ 4.1%) are achieved for xanthine detection in real samples. The inspiring results make the uniquely structural CuS@Pd/N-RGO greatly promising in non-enzymatic electrochemical sensing applications. Graphical abstract A high-performance non-enzymatic xanthine sensor has been constructed by the three-dimensional hierarchical CuS@Pd core-shell cauliflowers decorated on nitrogen-doped reduced graphene oxide.

A novel signal amplification strategy electrochemical immunosensor for ultra-sensitive determination of p53 protein

In this work, we fabricated a novel sandwich-type electrochemical immunosensor for quantitative and ultra-sensitive determination of tumor suppressor protein p53 by signal amplification strategy. Conductive polymers poly (3, 4-ethylenedioxythiophene): polystyrenesulfonate (PEDOT:PSS) has significantly effect on enhancing charge transfer and markedly increases the sensitivity of electrochemical immunosensing. Gold nanoparticles (AuNPs) as high conductivity nanocarriers were also used to capture monoclonal antibodies (Ab₁) due to their large specific surface areas. In addition, pH responsive zeolitic imidazolate framework (ZIF-8) was used to load the redox probe 2, 3-diaminophenazine (DAP) and the secondary antibodies (Ab₂) to form a sensitive-type ZIF-8-DAP-Ab₂ immunoprobe. After the sandwich-type immunoassay with the free p53 protein, with the release of probe DAP after the electrochemical signal amplificated by PEDOT:PSS and AuNPs, the ultra-sensitive and quantitative determination of p53 protein was realized with working range of 1-120 ng mL^-1 and low detection limit of 0.09 ng mL^-1. Besides, the fabricated electrochemical immunosensor exhibited good recovery, high sensitivity, reliability, and selectivity.

Rapid One-Pot Synthesis of Polydopamine Encapsulated Carbon Anchored with Au Nanoparticles: Versatile Electrocatalysts for Chloramphenicol and Folic Acid Sensors

Designing and engineering nanocomposites with tailored physiochemical properties through teaming distinct components is a straightforward strategy to yield multifunctional materials. Here, we describe a rapid, economical, and green one-pot microwave synthetic procedure for the preparation of ternary nanocomposites carbon/polydopamine/Au nanoparticles (C/PDA/AuNPs; C = carbon nanotubes (CNTs), reduced graphene oxide (rGO)). No harsh reaction conditions were used in the method, as are used in conventional hydrothermal or high-temperature methods. The PDA unit acts as a non-covalent functionalizing agent for carbon, through π stacking interactions, and also as a stabilizing agent for the formation of AuNPs. The CNTs/PDA/AuNPs modified electrode exhibited excellent electrocatalytic activity to oxidize chloramphenicol and the resulting sensor exhibited a low detection limit (36 nM), wide linear range (0.1–534 μM), good selectivity (against 5-fold excess levels of interferences), appreciable reproducibility (3.47%), good stability (94.7%), and practicality (recoveries 95.0%–98.4%). Likewise, rGO/PDA/AuNPs was used to fabricate a sensitive folic acid sensor, which exhibits excellent analytical parameters, including wide linear range (0.1–905 μM) and low detection limit (25 nM). The described synthetic route includes fast reaction time (5 min) and a readily available household microwave heating device, which has the potential to significantly contribute to the current state of the field.

The specific binding of a new 1,2,3-triazole to three blood proteins and it's appended rhodamine complex for selective detection of Hg2

A synthesized compound, ethyl 2,5-diphenyl-2H-1,2,3-triazole-4- carboxylate (EDTC) was investigated on its physiochemical parameters and structural properties by using the quantum-chemical method. The results on the theoretical spectrum of EDTC were line with experimental fluorescence and absorption spectrum in large degree. Then EDTC was successfully synthesized to a novel rhodamine-based fluorescent probe (REDTC), which showed a distinct fluorescence enhancement upon the presence of Hg²⁺ in dimethyl formamide-water (DMF-H₂O) buffer solution (pH 7.4). Meanwhile, the triazole appended colorless compound turns to pink upon complex formation with Hg²⁺ ions as 1:2 molar ratios and enables naked-eye detection. The chromogenic mechanism was determined by using spectroscopic measurements and TD DFT calculation. The fluorescence imaging experiments of Hg²⁺ in HeLa cell revealed that the probe REDTC could be labeled and it could be used in biological systems. Also, the intermediate EDTC was developed as a sensitive fluorescent probe for specific studies on the interactions to three kinds of blood proteins including human serum albumin (HSA), human immunoglobulin (HIg) and bovine hemoglobin (BHb) by using a series of spectroscopic methods and molecular docking under the simulative physiological conditions. The interactions between EDTC and these proteins led to the distinct fluorescence enhancement. The thermodynamic measured results further suggested that hydrophobic forces play a dominating role in stabilizing the complexes, which are in correspondence with the results from molecular docking. The UV-visible, synchronous, and three-dimensional (3D) fluorescence measurements demonstrated that EDTC influences the conformational of proteins and the microenvironment surrounding HSA, HIg, or BHb in aqueous solution.

The computational and experimental studies on a 1, 2, 3-triazole compound and its special binding to three kinds of blood proteins

A newly synthesized compound, ethyl 5-phenyl-2-(p-tolyl)-2H-1, 2, 3-triazole-4-carboxylate (EPPC) may be considered as a drug candidate and was exploited to study the structural and spectral properties by using quantum chemical calculation and multiple spectroscopic techniques. The results on theoretical spectrum of EPPC were consistent with experimental spectrum in great degree. In addition, EPPC has been as a special probe and investigated on the interactions with three kinds of blood proteins including human serum albumin (HSA), human immunoglobulin (HIgG) and bovine hemoglobin (BHb) by using UV-Vis, fluorescence spectroscopy and molecular modeling, respectively. Changes in various fluorescence and UV-Vis spectra were observed upon ligand binding along with a remarkable degree of fluorescence enhancement on complex formation under physiological condition with binding constant about 10⁵ order of magnitudes, which caused the variations of conformation and microenvironment of these proteins in aqueous solution. The obtained results from the thermodynamic parameters calculated according to the van't Hoff equation indicated that the entropy change ΔS° and enthalpy change ΔH° were found to be 0.168 KJ/mol K and 22.154 KJ/mol for EPPC-HSA system, 0.284 KJ/mol K and 54.408 KJ/mol for EPPC-HIgG system, and 0.228 KJ/mol K and 37.548 KJ/mol for EPPC-BHb system, respectively, which demonstrated that the primary binding pattern is determined by hydrophobic interaction. The results of docking and molecular dynamics simulation using three proteins crystal models revealed that EPPC could bind to three proteins well into hydrophobic cavity, which showed good consistence with the spectroscopic measurements.Communicated by Ramaswamy H. Sarma.

Electrochemical Biosensors as Potential Diagnostic Devices for Autoimmune Diseases

An important class of biosensors is immunosensors, affinity biosensors that are based on the specific interaction between antibodies and antigens. They are classified in four classes based on the type of employed transducer: electrochemical, optical, microgravimetric, and thermometric and depending on the type of recognition elements, antibodies, aptamers, microRNAs and recently peptides are integrating parts. Those analytical devices are able to detect peptides, antibodies and proteins in various sample matrices, without many steps of sample pretreatment. Their high sensitivity, low cost and the easy integration in point of care devices assuring portability are attracting features that justify the increasing interest in their development. The use of nanomaterials, simultaneous multianalyte detection and integration on platforms to form point-of-care devices are promising tools that can be used in clinical analysis for early diagnosis and therapy monitoring in several pathologies. Taking into account the growing incidence of autoimmune disease and the importance of early diagnosis, electrochemical biosensors could represent a viable alternative to currently used diagnosis methods. Some relevant examples of electrochemical assays for autoimmune disease diagnosis developed in the last several years based on antigens, antibodies and peptides as receptors were gathered and will be discussed further.

Electrically-Transduced Chemical Sensors Based on Two-Dimensional Nanomaterials

Electrically-transduced sensors, with their simplicity and compatibility with standard electronic technologies, produce signals that can be efficiently acquired, processed, stored, and analyzed. Two dimensional (2D) nanomaterials, including graphene, phosphorene (BP), transition metal dichalcogenides (TMDCs), and others, have proven to be attractive for the fabrication of high-performance electrically-transduced chemical sensors due to their remarkable electronic and physical properties originating from their 2D structure. This review highlights the advances in electrically-transduced chemical sensing that rely on 2D materials. The structural components of such sensors are described, and the underlying operating principles for different types of architectures are discussed. The structural features, electronic properties, and surface chemistry of 2D nanostructures that dictate their sensing performance are reviewed. Key advances in the application of 2D materials, from both a historical and analytical perspective, are summarized for four different groups of analytes: gases, volatile compounds, ions, and biomolecules. The sensing performance is discussed in the context of the molecular design, structure-property relationships, and device fabrication technology. The outlook of challenges and opportunities for 2D nanomaterials for the future development of electrically-transduced sensors is also presented.

A graphene oxide/gold nanoparticle-based amplification method for SERS immunoassay of cardiac troponin I

A multiple signal amplification of a SERS biosensor was developed for sensitive detection of cTnI with the aid of GO/AuNP complexes.