Functionalized gold nanoparticles/reduced graphene oxide nanocomposites for ultrasensitive electrochemical sensing of mercury ions based on thymine–mercury–thymine structure

A dual-signaling surface-enhanced Raman spectroscopy ratiometric strategy for ultrasensitive Hg2+ detection based on Au@Ag/COF composites

Heavy metal ion pollution poses significant risks to human health and ecological systems, and its monitoring is important. A sensitive and accurate surface-enhanced Raman spectroscopy (SERS) detection assay for Hg2+ was developed using Au@Ag/COF substrates and Y-shaped DNA labeled with two Raman reporters. The Au@Ag NPs in the COF produced robust and uniform E-fields, improving their detection reproducibility. The Y-shaped DNA design increased sensitivity with a low detection limit of 5.0 × 10-16 M by bringing the Raman reporter closer to the substrate surface. Additionally, the use of two Raman reporters allowed for a ratiometric method, improving detection accuracy by detecting both "signal-off" and "signal-on" signals. This selective sensor exhibited excellent recovery in river water, tap water, and milk samples, showcasing its robust biosensing capability for the detection of Hg2+ and its potential for sensing other heavy-metal ions in food and environmental applications.

Electrochemical sensing of Hg(ii) in chicken liver and snail shell extract samples using novel modified SDA/MWCNT electrodes

Heavy metal ions (Hg(ii)) were detected in fresh chicken liver and snail shell extract samples using novel synthesised SDA/MWCNT-modified electrodes. The synthesized N,N'-bis(salicylaldehyde)-1,2-diaminobenzene (SDA) ligand was characterized via FT-IR, 1H-NMR, and 13C-NMR spectroscopy. The hydroxyl and imine functional groups present in SDA act as active sites and bind to the MWCNT surface. The surface morphology of the modified SDA/MWCNT electrode exhibited a star-like crystal structure and the preconcentration of Hg(ii)-SDA/MWCNTs lead to a crystal cloud structure, as characterized by SEM with EDX. The enhancement of current and conductance of the SDA/MWCNT- and MWCNT-modified electrode was investigated by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The conductance (σ) values for the MWCNT- and SDA/MWCNT-modified electrodes are 234.1 × 10-5 S cm-1 and 358.4 × 10-5 S cm-1, respectively, as determined by electrochemical impedance spectroscopy. Consequently, an electrochemical sensor with outstanding performance in terms of reproducibility, stability and anti-interference ability was fabricated. The stripping analysis of Hg(ii) was performed using square wave anodic stripping voltammetry (SWASV) and cyclic voltammetry (CV). Using SWASV, a linear range of Hg(ii) response was found to be 1.3 to 158 μg L-1, and the limit of detection (LOD) was 0.24 μg L-1. Finally, the results of the recovered value of Hg(ii) in freshly prepared chicken liver and snail shell extract samples by SWASV were compared with the atomic absorption spectroscopy (AAS) results.

Chitosan-assisted self-assembly of flower-shaped ε-Fe2O3 nanoparticles on screen-printed carbon electrode for Impedimetric detection of Cd2+, Pb2+, and Hg2+ heavy metal ions in various water samples

This study focuses on the fabrication of a novel sensing platform on a screen-printed carbon electrode, modified by a combination of hydrothermally synthesized iron dioxide (ε-Fe2O3) nanoparticles and Chitosan (CS) biopolymer. This unique organic-inorganic hybrid material was developed for Electrochemical Impedance Spectroscopy (EIS) sensing, specifically targeting heavy metal ions that include Hg2+, Cd2+, as well as Pb2+. The investigation encompassed a comprehensive analysis of various aspects of the prepared Fe2O3 and CS/ε-Fe2O3 nanocomposites, including phase identification, determination of crystallite size, assessment of surface morphology, etc. CS/ε-Fe2O3 was drop-casted and deposited on the Screen-Printed Electrode (SPE). The resulting sensor exhibited excellent performance in the precise and selective quantification of Hg2+, Cd2+, and Pb2+ ions, with minimal interference from other substances. The fabricated sensor exhibits excellent performance as the detection range for Hg2+, Cd2+, and Pb2+ ions linearity is 2-20 μM, sensitivity, and LOD are 243 Ω/ μM cm2 and 0.191 μM, 191 Ω/μM cm2, and 0.167 μM, 879 Ω/ μM cm2, and 0.177 μM respectively. The stability of the CS/ε-Fe2O3/SPE electrode is demonstrated by checking its conductivity for up to 60 days for Hg2+, Cd2+, and Pb2+ ions. The reusability of the fabricated electrode is 14 scans, 13 scans, and 12 scans for Hg2+, Cd2+, and Pb2+ ions respectively. The findings indicate the successful development of an innovative CS/ε-Fe2O3 electrode for the EIS sensing platform. This platform demonstrates notable potential for addressing the critical need for efficient and sensitive EIS sensors capable of detecting a range of hazardous heavy metal ions, including Hg2+, Cd2+, and Pb2+.

A double methylene blue labeled single-stranded DNA and hairpin DNA coupling biosensor for the detection of Fusarium oxysporum f. sp. cubense race 4

The DCL gene in Fusarium oxysporum f. sp. cubense Race 4 (Foc4) is a pivotal pathogenic factor causing banana fusarium wilt. Precise DCL detection is crucial for Foc4 containment. Here, we present a novel ssDNA-hDNA coupling electrochemical biosensor for highly specific DCL detection. The sensing interface was formed via electrodeposition of a composite containing reduced graphene oxide (rGO) and gold nanoparticles (AuNPs) onto a carbon screen-printed electrode (SPE), followed by thiol-modified ssDNA functionalization. Additionally, the incorporation of hDNA, with methylene blue (MB) at both ends, binds to ssDNA through base complementarity, forming an ssDNA-hDNA coupling probe with bismethylene blue. This sensing strategy relies on DCL recognition by the hDNA probe, leading to DNA hairpin unfolding and detachment of hDNA bearing two MBs from ssDNA, generating a robust "on-off" signal. Empirical results demonstrate the sensor's amplified electrical signals, reduced background currents, and an extended detection range (6.02 × 106-3.01 × 1010 copies/μL) with a limit of detection (3.01 × 106 copies/μL) for DCL identification. We applied this sensor to analyze soil, banana leaves, and fruit samples, confirming its high specificity and stability. Moreover, post-sample detection, the sensor exhibits reusability, offering a cost-effective and rapid approach for banana wilt detection.

Parthenium hysterophorus derived nanostructures as an efficient carbocatalyst for the electrochemical sensing of mercury(II) ions

The sustainable utilization of resources motivate us to create eco-friendly processes for synthesizing novel carbon nanomaterials from waste biomass by minimizing chemical usage and reducing energy demands. By keeping sustainability as a prime focus in the present work, we have made the effective management of Parthenium weeds by converting them into carbon-based nanomaterial through hydrothermal treatment followed by heating in a tube furnace under the nitrogen atmosphere. The XPS studies confirm the natural presence of nitrogen and oxygen-containing functional groups in the biomass-derived carbon. The nanostructure has adopted a layered two-dimensional structure, clearly indicated through HRTEM images. Further, the nanomaterials are analyzed for their ability towards the electrochemical detection of mercury, with a detection limit of 6.17 μM, while the limit of quantification and sensitivity was found to be 18.7 μM and 0.4723 μM μA-1 cm-2, respectively. The obtained two-dimensional architecture has increased the surface area, while the nitrogen and oxygen functional groups act as an active site for sensing the mercury ions. This study will open a new door for developing metal-free catalysts through a green and sustainable approach by recycling and utilization of waste biomass.

Nanohybrid of antimonene@Ti3C2Tx-based electrochemical aptasensor for lead detection

Lead ions (Pb2+), as one of many common heavy metallic environmental pollutants, can cause serious side-effects and result in chronic poisoning to people's health, so it is highly significant to monitor Pb2+ efficiently and sensitively. Here, we proposed an antimonene@Ti3C2Tx nanohybrid-based electrochemical aptamer sensor (aptasensor) for high sensitive Pb2+ determination. The sensing platform of nanohybrid was synthesized by ultrasonication, possessing the advantages of both antimonene and Ti3C2Tx, which not only can vastly enlarge the sensing signal of the proposed aptasensor, but also greatly simplified its manufacturing flow, because antimonene can strongly interact with aptamer through noncovalently bound. The surface morphology and microarchitecture of the nanohybrid were perused by several methods such as scanning electron microscope (SEM), energy-dispersive X-ray mapping spectroscopy (EDS), transmission electron microscope (TEM), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and atomic force microscope (AFM). Under optimal empirical conditions, the proposed aptasensor exhibited a wide linear correlation of the current signals with the logarithm of CPb2+ (Log CPb2+) over the span from 1 × 10-12 to 1 × 10-7 M and provided a trace discernment limit of 3.3 × 10-13 M. Moreover, the constructed aptasensor displayed superior repeatability, great consistency, eminent selectivity, and beneficial reproducibility, implying its extreme potential application for water quality control and the environmental monitoring of Pb2+.

Paper disc interfaced Prussian blue nanocube modified immunodevice for electrochemical detection of diverse biomarker at point of care

The detection of specific biomarkers is used in various phases of the diagnosis of plant and human diseases, from prognosis to monitoring. Herein, we report a Prussian blue nanocube-modified immunodevice interfaced with a paper disc for the detection of plant biomarkers via streptavidin-biotin recognition. The detection ability of the immunodevice was assessed using Potato virus X as a model biomarker and analyzed using cyclic voltammetry, differential pulse voltammetry, and electrochemical impedance spectroscopy. The immunodevice displayed excellent performance for Potato virus X detection with a detection limit of 0.92 nM (3S/N). The selectivity of the fabricated Potato virus X immunodevice was investigated using closely associated antigens, such as potato aucuba mosaic virus, Potato virus Y, and Potato virus A. The Potato virus X immunodevice exhibited ∼ 90 % recovery in spiked complex plant samples with a relative error of ∼ 9 %. Furthermore, the immunodevice was used to screen for Potato virus X in 10 samples from potato tubers and leaves. The paper-disc-interfaced immunodevice was also evaluated by detecting other biomarkers, such as potato aucuba mosaic virus in plant diseases and C-reactive protein in human ones. This immunodevice may allow the on-site monitoring of diverse biomarkers by simplifying the current point of care diagnostic tools.

Rapid saline-alkali sensitivity testing using hydrogel/gold nanoparticles-modified screen-printed electrodes

Rapid screening of microorganisms with good saline-alkali tolerance is of great significance for the improvement of saline-alkali land. In this study, a novel electrochemical method was developed for the rapid screening of saline-alkali-tolerant bacteria using a hydrogel/gold nanoparticles-modified screen-printed electrode. Monitoring bacterial growth using electrochemical impedance spectroscopy (EIS) and differential pulse voltammetry (DPV) yielded a new method to measure saline-alkali sensitivity. The strains were deposited on agarose hydrogel-AuNPs composite-modified electrodes with saline-alkali treatment control at a concentration of 50 mM. The electrochemical-derived growth curve of each bacterial strain was established to monitor the effect of saline-alkaline conditions on bacterial growth. The results showed that E. coli could grow on the hydrogel-AuNPs composite-modified electrodes without saline and alkali, while the growth of E. coli was inhibited after adding saline and alkali to the modified electrodes. In contrast, Paenibacillus lautus (HC_A) and Lysinibacillus fusiformis (HC_B) were able to grow on electrodes containing saline-alkali hydrogel-AuNPs composite modification. This fast growth curves of the strains derived from electrochemical analysis indicate that the possible time for salinity sensitivity results is <45 min. Compared to the traditional bacterial culture method lasting at least 1-2 days, this method has the clear advantages of rapidity, high efficiency, and low cost.

Fabrication of hierarchical β-Bi2O3/AuAg microspheres for sensitive, selective and rapid detection of environment pollutants by surface-enhanced Raman spectroscopy

In this paper, we report a novel surface-enhanced Raman spectroscopy (SERS) substrate based on hierarchical β-Bi2O3/Au2Ag2 microspheres for rapid, sensitive and selective detection of environment pollutants including o-dianisidine (o-diASD) and Hg2+ in environmental samples. The sheet-like β-Bi2O3 not only provides large specific surface areas for adsorption of molecules and AuAg, but also emerges as semiconductor matrix with chemical enhancement combined with AuAg with electromagnetic enhancement, making promising SERS activity. Particularly, the β-Bi2O3/Au2Ag2 shows high SERS performance for 4-mercaptobenzoic acid and TMB with minimum detectable concentration of 0.1 μg/L with enhancement factor of 3.1 × 107 and 6.3 × 107, respectively. The density functional theory simulations were further adopted to explain the high SERS activity and selectivity for o-diASD and TMB. Finally, the β-Bi2O3/Au2Ag2 was applied to direct detection of o-diASD, and indirect detection of Hg2+ by TMB marking in environmental samples. The linearity range of 0.5-200.0 and 0.2-500.0 μg/L with limit of detection of 0.2 and 0.07 μg/L for o-diASD and Hg2+ ions can be achieved, respectively. This method provides a novel strategy in designing and fabricating SERS substrates with high performance for rapid, sensitive and accurate analysis of environmental pollutants.

Electrochemical Sensors Based on Au Nanoparticles Decorated Pyrene-Reduced Graphene Oxide for Hydrazine, 4-Nitrophenol and Hg2+ Detection in Water

Monitoring hazardous chemical compounds such as hydrazine (N2H4), 4-nitrophenol (4-NP) and Hg2+ in natural water resources is a crucial issue due to their toxic effects on human health and catastrophic impact on the environment. Electrochemical nanostructured platforms integrating hybrid nanocomposites based on graphene derivatives and inorganic nanoparticles (NPs) are of great interest for such a purpose. In this work, disposable screen-printed carbon electrodes (SPCEs) have been modified with a hybrid nanocomposite formed by reduced graphene oxide (RGO), functionalized by 1-pyrene carboxylic acid (PCA), and decorated by colloidal Au NPs. These hybrid platforms have been tested for the electrocatalytic detection of N2H4 and 4-NP by differential pulse voltammetry and have been modified with an electropolymerized film of Hg2+ ions imprinted polycurcumin for the electroanalytical detection of Hg2+ by DPV. LODs, lower and in line with the lowest ones reported for state-of-the-art electrochemical sensors, integrating similar Au-graphene < nanocomposites, have been estimated. Additionally, good repeatability, reproducibility, and storage stability have been assessed, as well as a high selectivity in the presence of a 100-fold higher concentration of interfering species. The applicability of the proposed platforms for the detection of the compounds in real complex matrices, such as tap and river water samples, has been effectively demonstrated.

Environment tolerant, adaptable and stretchable organohydrogels: preparation, optimization, and applications

Multiple stretchable materials have been successively developed and applied to wearable devices, soft robotics, and tissue engineering. Organohydrogels are currently being widely studied and formed by dispersing immiscible hydrophilic/hydrophobic polymer networks or only hydrophilic polymer networks in an organic/water solvent system. In particular, they can not only inherit and carry forward the merits of hydrogels, but also have some unique advantageous features, such as anti-freezing and water retention abilities, solvent resistance, adjustable surface wettability, and shape memory effect, which are conducive to the wide environmental adaptability and intelligent applications. This review first summarizes the structure, preparation strategy, and unique advantages of the reported organohydrogels. Furthermore, organohydrogels can be optimized for electro-mechanical properties or endowed with various functionalities by adding or modifying various functional components owing to their modifiability. Correspondingly, different optimization strategies, mechanisms, and advanced developments are described in detail, mainly involving the mechanical properties, conductivity, adhesion, self-healing properties, and antibacterial properties of organohydrogels. Moreover, the applications of organohydrogels in flexible sensors, energy storage devices, nanogenerators, and biomedicine have been summarized, confirming their unlimited potential in future development. Finally, the existing challenges and future prospects of organohydrogels are provided.

Controllable Synthesis of a Porous PEI-Functionalized Co3O4/rGO Nanocomposite as an Electrochemical Sensor for Simultaneous as Well as Individual Detection of Heavy Metal Ions

The present study focuses on the strategy of employing an electrochemical sensor with a porous polyethylenimine (PEI)-functionalized Co₃O₄/reduced graphene oxide (rGO) nanocomposite (NCP) to detect heavy metal ions (HMIs: Cd²⁺, Pb²⁺, Cu²⁺, and Hg²⁺). The porous PEI-functionalized Co₃O₄/rGO NCP (rGO·Co₃O₄·PEI) was prepared via a hydrothermal method. The synthesized NCP was based on a conducting polymer PEI, rGO, nanoribbons of Co₃O₄, and highly dispersed Co₃O₄ nanoparticles (NPs), which have shown excellent performance in the detection of HMIs. The as-prepared PEI-functionalized rGO·Co₃O₄·PEI NCP-modified electrode was used for the sensing/detection of HMIs by means of both square wave anodic stripping voltammetry (SWV) and differential normal pulse voltammetry (DNPV) methods for the first time. Both methods were employed for the simultaneous detection of HMIs, whereas SWV was employed for the individual analysis as well. The limits of detection (LOD; 3σ method) for Cd²⁺, Pb²⁺, Cu²⁺, and Hg²⁺ determined using the rGO·Co₃O₄·PEI NCP-modified electrode were 0.285, 1.132, 1.194, and 1.293 nM for SWV, respectively. Similarly, LODs of Cd²⁺, Pb²⁺, Cu²⁺, and Hg²⁺ were 1.069, 0.285, 2.398, and 1.115 nM, respectively, by DNPV during simultaneous analysis, whereas they were 0.484, 0.878, 0.462, and 0.477 nM, respectively, by SWV in individual analysis.

Surface-enhanced Raman spectroscopy and density functional theory study of thymine-1-acetic acid interaction with silver nanoparticles

Thymine-1-acetic acid (TAA) is a modified nucleobase often used to add thymine functionality to materials. This study reports the Raman band assignments for TAA by comparing its experimental and density functional theory (DFT) simulated Raman spectra. Further comparison of experimental surface-enhanced Raman spectroscopy (SERS) of TAA on silver nanoparticles (Ag NPs) with simulated spectra of various complexes of xAg+ (x = 1, 2, or 3) and TAA reveals its likely adsorption orientation on the Ag NPs. This is one of the few studies that has achieved reasonably accurate simulation of SERS by employing multiple unconnected Ag+ ions, which could represent a compromise between a single atom or ion on one hand and a computationally expensive cluster on the other.

Nanostructured sensor platform based on organic polymer conjugated to metallic nanoparticle for the impedimetric detection of SARS-CoV-2 at various stages of viral infection

The projection of new biosensing technologies for genetic identification of SARS-COV-2 is essential in the face of a pandemic scenario. For this reason, the current research aims to develop a label-free flexible biodevice applicable to COVID-19. A nanostructured platform made of polypyrrole (PPy) and gold nanoparticles (GNP) was designed for interfacing the electrochemical signal in miniaturized electrodes of tin-doped indium oxide (ITO). Oligonucleotide primer was chemically immobilized on the flexible transducers for the biorecognition of the nucleocapsid protein (N) gene. Methodological protocols based on cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and atomic force microscopy (AFM) were used to characterize the nanotechnological apparatus. The biosensor’s electrochemical performance was evaluated using the SARS-CoV-2 genome and biological samples of cDNA from patients infected with retrovirus at various disease stages. It is inferred that the analytical tool was able to distinguish the expression of SARS-CoV-2 in patients diagnosed with COVID-19 in the early, intermediate and late stages. The biosensor exhibited high selectivity by not recognizing the biological target in samples from patients not infected with SARS-CoV-2. The proposed sensor obtained a linear response range estimated from 800 to 4000 copies µL⁻¹ with a regression coefficient of 0.99, and a detection limit of 258.01 copies µL⁻¹. Therefore, the electrochemical biosensor based on flexible electrode technology represents a promising trend for sensitive molecular analysis of etiologic agent with fast and simple operationalization. In addition to early genetic diagnosis, the biomolecular assay may help to monitor the progression of COVID-19 infection in a novel manner.

An overview of Structured Biosensors for Metal Ions Determination

The determination of metal ions is important for nutritional and toxicological assessment. Atomic spectrometric techniques are highly efficient for the determination of these species, but the high costs of acquisition and maintenance hinder the application of these techniques. Inexpensive alternatives for metallic element determination are based on dedicated biosensors. These devices mimic biological systems and convert biochemical processes into physical outputs and can be used for the sensitive and selective determination of chemical species such as cations. In this work, an overview of the proposed biosensors for metal ions determination was carried out considering the last 15 years of publications. Statistical data on the applications, response mechanisms, instrumentation designs, applications of nanomaterials, and multielement analysis are herein discussed.

New sensing platform of poly(ester-urethane)urea doped with gold nanoparticles for rapid detection of mercury ions in fish tissue

A new electrochemical sensor has been fabricated based on the in situ synthesis of poly(ester-urethane) urea (PUU) doped with gold nanoparticles (AuNPs), and the obtained composite materials (PUU/AuNPs) were used as a new sensing platform for highly sensitive and selective detection of mercury(II) ions in fish tissue. PUU was synthesized and fully characterized by XRD, TGA, DSC, and FTIR to analyze the chemical structure, thermal stability, and morphological properties. As a polymeric structure, the PUU consists of urethane and urea groups that possess pronounced binding abilities to Hg2+ ions. SEM-EDX was carried out to confirm this kind of interaction. Using ferricyanide as the redox probe, PUU alone exhibited weak electrochemical signals due to its low electrical conductivity. Therefore, a new series of nanocomposites of PUU with different nanostructured materials were applied, and their electrochemical performances were evaluated. Among these materials, the PUU/AuNP-modified electrode showed high voltammetric signals towards Hg2+. Consequently, the parameters affecting the performance of the assay, such as electrode composition, scan rate, and sensing time, as well as the effect of electrolyte and pH were studied and optimized. The sensor showed a linear range of 5 ng mL-1 to 155 ng mL-1 with the regression coefficient R 2 = 0.986, while the calculated values of the limit of detection (LOD) and limit of quantification (LOQ) were 0.235 ng mL-1 and 0.710 ng mL-1, respectively. In terms of cross reactivity testing, the sensor exhibited a high selectivity against heavy metals which are commonly determined in seafood (Cd2+, Pb2+, As3+, Cr3+, Mg2+, and Cu2+). For real applications, total Hg2+ ions in fish tissue were determined with very high recovery and no prior complicated treatments.

Wide-field determination of aqueous mercury(II) based on tail-extensible DNA fluorescent probe with tunable dynamic range

Mercury (Hg) is one of the most hazardous pollutants, widely distributed in water, atmosphere, and soil, while the Hg contents from different sources are greatly different. Until now, numerous reported methods are only suitable for a kind of sample because they cannot reconcile sensitivity and linear range. In this work, a tail-extensible DNA fluorescent probe for "turn on" detection of Hg²⁺ with tunable dynamic range and high sensitivity was developed, which was based on segmental hybridization between silver nanoclusters (AgNCs)-covered DNA and different guanine-rich DNAs. By adding adenine-guanine-cytosine (AGC) base repeats as a tail of the guanine-rich DNA, the formation constant of T-Hg²⁺-T complex was effectively modulated within two orders of magnitude. Based on it, a tunable dynamic range from 0.035 to 0.2 pM to 8.0-120.0 pM was achieved by combining four fluorescent probes with different tail lengths. The Hg²⁺contents from different sources were successfully measured. This evidenced the proposed sensor's application toward wide-field detection, which is useful for the direct and objective comparison of results from different sources, and therefore providing a way for solving the shortcomings of reported methods for Hg²⁺ detection. Additionally,this present method is simple, cost-effective and time-saving, ultrasensitive and highly selective, which is favorable for expanding its applications and subsequent mercury pollution control.

How Stabilizers and Reducing Agents Affect the Formation of Nanogold Amalgams

The influence of mercury on the morphology and formation mechanism of gold amalgams in the presence of different reducing agents (ascorbic acid and sodium borohydride) was systematically studied. In the presence of cetyltrimethylammonium bromide (CTAB), chemical reducing agents not only reduced mercury ions in the solution but also replaced the CTAB molecules on the surface of the gold nanorod. The stability of the reducing agents in the colloidal system and the combining capacity of the reducing agent to the gold nanoparticles can affect the alloying process of mercury and gold, thereby forming a rod-shaped or spherical gold amalgam. Once CTAB was removed, a similar transformation process occurs between the gold nanorods and mercury. In addition, without the presence of a stabilizer, mercury that cannot be dispersed undergoes Ostwald ripening growth, which causes the gold amalgam nanoalloys to form a tip-to-tip structure as a result of mercury enrichment because of the weak shielding effects occurring at the tips of the gold nanorods. After the CTAB molecules were substituted with ascorbic acid and alkylthiol molecules, the question of whether the shielding effect weakened or disappeared was also investigated. By investigation, this research found that, in comparison to the blocking effect of CTAB molecules, the binding ability of the reducing agent to gold plays a dominant role in the nanoamalgam formation process.

Flexible sensor based on conducting polymer and gold nanoparticles for electrochemical screening of HPV families in cervical specimens

Considering the low sensitivity of cytological exams and high costs of the molecular methods, the development of diagnostic tests for effective diagnosis of HPV infections is a priority. In this work, biosensor composed of polypyrrole (PPy) films and gold nanoparticles (AuNPs) was obtained for specific detection of HPV genotypes. The biosensor was developed by using flexible electrodes based on polyethylene terephthalate (PET) strips coated with indium tin oxide (ITO). Polymeric films and AuNPs were obtained by electrosynthesis. Oligonucleotides sequences modified with functional amino groups were designed to recognize HPV gene families strictly. The modified oligonucleotides were chemically immobilized on the nanostructured platform. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) were used for the analysis of the electrode modification and monitoring of molecular hybridization. Electrochemical changes were observed after exposure of the biosensors to plasmid samples and cervical specimens. The biosensor based on the BSH16 probe showed a linear concentration range for target HPV16 gene detection of 100 pg μL^-1 to 1 fg μL^-1. A limit of detection (LOD) of 0.89 pg μL^-1 and limit of quantification (LOQ) of 2.70 pg μL^-1 were obtained, with a regression coefficient of 0.98. Screening tests on cervical specimens were performed to evaluate the sensibility and specificity for HPV and its viral family. The expression of a biomarker for tumorigenesis (p53 gene) was also monitored. In this work, a flexible system has been successfully developed for label-free detection of HPV families and p53 gene monitoring with high specificity, selectivity, and sensitivity.

Colorimetric oligonucleotide-based sensor for ultra-low Hg2+ in contaminated environmental medium: Convenience, sensitivity and mechanism

A colorimetric sensor for detection of Hg²⁺ is developed via graphene oxide/gold nanoparticles (GO/AuNPs) nanocomposite as peroxidase mimic. In the absence of Hg²⁺, the adsorption of ss-DNA on GO/AuNPs resulted in the decrease of peroxidase-like activity of GO/AuNPs, which catalyzed the oxidation of 3, 3, 5, 5-tetramethylbenzidine (TMB) to be very light blue. In the presence of Hg²⁺, the oligonucleotides of T-Hg²⁺-T conformation formed by thymine-Hg(II)-thymine interaction could not be adsorbed or bonded on GO/AuNPs, and the GO/AuNPs resumed their original high activity of peroxidase mimic and catalyzed the oxidation of TMB into distinct blue product. Under optimized conditions, the absorbance value at the wavelength of 655 nm (A₆₅₅) was linearly related with the concentration of Hg²⁺ in the range between 5.2 × 10^-9 M and 1.2 × 10^-7 M with a detection limit of 3.8 × 10^-10 M. By visual observation with the naked eye, Hg²⁺ as low as 3.3 × 10^-7 M could cause color change in solution. The specific T-Hg²⁺-T binding made it easy to selectively detect Hg²⁺. The results show that the colorimetric assay offers great potential for the detection of Hg²⁺ in real samples.

Trends in sensor development toward next-generation point-of-care testing for mercury

Mercury is one of the most common heavy metals and a major environmental pollutant that affects ecosystems. Since mercury and its compounds are toxic to humans, even at low concentrations, it is very important to monitor mercury contamination in water and foods. Although conventional mercury detection methods, including inductively coupled plasma mass spectrometry, atomic absorption spectroscopy, and gas chromatography-mass spectrometry, exhibit excellent sensitivity and accuracy, they require operation by an expert in a sophisticated and fully controlled laboratory environment. To overcome these limitations and realize point-of-care testing, many novel methods for direct sample analysis in the field have recently been developed by improving the speed and simplicity of detection. Commonly, these unconventional sensors rely on colorimetric, fluorescence, or electrochemical mechanisms to transduce signals from mercury. In the case of colorimetric and fluorescent sensors, benchtop methods have gradually evolved through technology convergence to give standalone platforms, such as paper-based assays and lab-on-a-chip systems, and portable measurement devices, such as smartphones. Electrochemical sensors that use screen-printed electrodes with carbon or metal nanomaterials or hybrid materials to improve sensitivity and stability also provide promising detection platforms. This review summarizes the current state of sensor platforms for the on-field detection of mercury with a focus on key features and recent developments. Furthermore, trends for next-generation mercury sensors are suggested based on a paradigm shift to the active integration of cutting-edge technologies, such as drones, systems based on artificial intelligence, machine learning, and three-dimensional printing, and high-quality smartphones.

Hollow Multiple Noble Metallic Nanoalloys by Mercury-Assisted Galvanic Replacement Reaction for Hydrogen Evolution

Hollow multimetallic noble nanoalloys with high surface area/volume ratio, abundant active sites, and relatively effective catalytic activity have attracted considerable research interest. Traditional noble nanoalloys fabricated by hydro-/solvothermal methods usually involve harsh synthetic conditions such as high temperatures and intricate processing. We proposed a simple and mild strategy to synthesize platinum- and palladium-decorated hollow gold-based nanoalloys by the galvanic replacement reaction (GRR) at room temperature using hollow gold nanoparticles as templates and mercury as an intermediate. The hollow gold nanoparticles were essential for increasing the number of surface-active sites of the obtained multimetallic nanoalloys, and the introduction of mercury can eliminate the influence of the electrochemical potential of Pt/Pd with Au in the GRRs, increase alloying degrees, and maintain the nanoalloys that exhibit the hollow nanostructures. The structural characterizations of the hollow nanoalloys were studied by means of high-angle annular dark-field scanning transmission electron microscopy, X-ray photoelectron spectroscopy, and X-ray diffraction. On the basis of the electrochemical catalytic measurements, the platinum-exposed nanoalloys were found to have excellent electrocatalytic activities. Especially in the presence of palladium, owing to the synergistic effect, the quaternary AuHgPdPt hollow nanoalloy displayed a low overpotential of 38 mV at 10 mA cm^-2 with a small Tafel slope of 56.23 mV dec^-1 for the alkaline hydrogen evolution reaction. In addition, this approach not only expands the application range of the galvanic replacement reaction but also provides new ideas for the preparation of multialloys and even high-entropy alloys at room temperature.

Graphene and its Derivatives-Based Optical Sensors

Being the first successfully prepared two-dimensional material, graphene has attracted extensive attention from researchers due to its excellent properties and extremely wide range of applications. In particular, graphene and its derivatives have displayed several ideal properties, including broadband light absorption, ability to quench fluorescence, excellent biocompatibility, and strong polarization-dependent effects, thus emerging as one of the most popular platforms for optical sensors. Graphene and its derivatives-based optical sensors have numerous advantages, such as high sensitivity, low-cost, fast response time, and small dimensions. In this review, recent developments in graphene and its derivatives-based optical sensors are summarized, covering aspects related to fluorescence, graphene-based substrates for surface-enhanced Raman scattering (SERS), optical fiber biological sensors, and other kinds of graphene-based optical sensors. Various sensing applications, such as single-cell detection, cancer diagnosis, protein, and DNA sensing, are introduced and discussed systematically. Finally, a summary and roadmap of current and future trends are presented in order to provide a prospect for the development of graphene and its derivatives-based optical sensors.

Thymine-Functionalized Gold Nanoparticles (Au NPs) for a Highly Sensitive Fiber-Optic Surface Plasmon Resonance Mercury Ion Nanosensor

Mercury ion (Hg²⁺) is considered to be one of the most toxic heavy metal ions. Once the content of Hg²⁺ exceeds the quality standard in drinking water, the living environment and health of human beings will be threatened and destroyed. Therefore, the establishment of simple and efficient methods for Hg²⁺ ion detection has important practical significance. In this paper, we present a highly sensitive and selective fiber-optic surface plasmon resonance (SPR) Hg²⁺ ion chemical nanosensor by designing thymine (T)-modified gold nanoparticles (Au NPs/T) as the signal amplification tags. Thymine-1-acetic acid (T-COOH) was covalently coupled to the surface of 2-aminoethanethiol (AET)-modified Au NPs and Au film by 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide hydrochloride/N-Hydroxysuccinimide (EDC/NHS) activation effect, respectively. In the presence of Hg²⁺ ions, the immobilized thymine combines specifically with Hg²⁺ ions, and forms an Au/thymine-Hg²⁺-thymine/Au (Au/T-Hg²⁺-T/Au) complex structure, leading to a shift in SPR wavelength due to the strong electromagnetic couple between Au NPs and Au film. Under optimal conditions, the proposed sensor was found to be highly sensitive to Hg²⁺ in the range of 80 nM–20 µM and the limit of detection (LOD) for Hg²⁺ was as low as 9.98 nM. This fiber-optic SPR sensor afforded excellent selectivity for Hg²⁺ ions against other heavy metal ions such as Fe³⁺, Cu²⁺, Ni²⁺, Ba²⁺, K⁺, Na⁺, Pb²⁺, Co²⁺, and Zn²⁺. In addition, the proposed sensor was successfully applied to Hg²⁺ assay in real environmental samples with excellent recovery. Accordingly, considering its simple advantages, this novel strategy provides a potential platform for on-site determination of Hg²⁺ ions by SPR sensor.

A molecularly imprinted poly 2-aminophenol-gold nanoparticle-reduced graphene oxide composite for electrochemical determination of flutamide in environmental and biological samples

A selective and sensitive electrochemical sensor based on reduced graphene oxide, gold nanoparticles, and molecularly imprinted poly 2-aminophenol was developed for electrochemical determination of flutamide in environmental and biological samples. The composite fabrication was electrochemically carried out and the composite was characterized by Fourier transform infrared, proton and carbon nuclear magnetic resonance, field emission scanning electron microscopy, and energy-dispersive X-ray spectrometry. The spectroscopic results showed that polymerization of molecularly imprinted poly 2-aminophenol took place through a ladder structure system. After optimization of effective parameters on the response of the sensor, the obtained linear range, relative standard deviation (for a concentration of 50 μg L^-1 with five replicates) and limit of quantification for flutamide determination were determined to be 2-375 μg L^-1, 1.54% and 0.8 μg L^-1, respectively. The results showed that the application of poly 2-aminophenol in the structure of the proposed sensor using a molecular imprinting approach made the sensor highly selective toward flutamide, distinguishing it from similar nitro-containing compounds. The prepared sensor was successfully utilized to analyze environmental water and urine samples. The obtained results showed that the proposed method is in agreement with the HPLC method and can be used as a reliable alternative method for the analysis of flutamide.

Paper Microfluidics and Tailored Gold Nanoparticles for Nonenzymatic, Colorimetric Multiplex Biomarker Detection

The plasmonic properties of gold nanoparticles (AuNPs) are a promising tool to develop sensing alternatives to traditional, enzyme-catalyzed reactions. The need for sensing alternatives, especially in underdeveloped areas of the world, has given rise to the application of nonenzymatic sensing approaches paired with cellulosic substrates to biochemical analysis. Herein, we present three individual, low-step, wet-chemistry, colorimetric assays for three target biomarkers, namely, glucose, uric acid, and free cholesterol, relevant in diabetes control and their translation into paper-based assays and microfluidic platforms for multiplexed analysis. For glucose determination, an in situ AuNPs synthesis approach was applied into the developed μPAD, giving semiquantitative measures in the physiologically relevant range. For uric acid and cholesterol determination, modified AuNPs were used to functionalize paper with a gold-on-paper approach with the optical properties changing based on different aggregation degrees and hydrophobic properties of particles dependent on analyte concentration. These paper-based assays show sensitivity ranges and limits of detection compatible for target analyte level determination and detection limits comparable to those of similar enzymatic, colorimetric systems, relying only on plasmonic transduction without the need for enzymatic activity or other chromogenic substrates. The resulting paper-based assays were integrated into a single 3D, multiplex paper-based device using paper microfluidics, showing the capability for performing different colorimetric assays with distinct requirements in terms of sample flow and sample uptake in test zones using a combination of both horizontal and vertical flows inside the same device. The presented device allows for multiparametric, colorimetric measures of different metabolite levels from a single complex sample matrix drop using digital color analysis, showing the potential for development of low-cost, low-complexity tools for diagnostics toward the point-of-care.

Two-dimensional conductive phthalocyanine-based metal-organic frameworks for electrochemical nitrite sensing

2D nickel phthalocyanine based MOFs (NiPc-MOFs) with excellent conductivity were synthesized through a solvothermal approach. Benefiting from excellent conductivity and a large surface area, 2D NiPc-MOF nanosheets present excellent electrocatalytic activity for nitrite sensing, with an ultra-wide linear concentration from 0.01 mM to 11 500 mM and a low detection limit of 2.3 μM, better than most reported electrochemical nitrite sensors. Significantly, this work reports the synthesis of 2D conductive NiPc-MOFs and develops them as electrochemical biosensors for non-enzymatic nitrite determination for the first time.

Fluorescence resonance energy transfer between carbon quantum dots and silver nanoparticles: Application to mercuric ion sensing

Fluorescence resonance energy transfer (FRET) process as a practical and competitive sensing strategy was utilized between carbon quantum dots (C-dots) and silver nanoparticles (Ag NPs) for the determination of mercuric ions. The novel synthesized C-dots with the quantum yield of 84% acted as the donor and Ag NPs operated as the acceptor in the FRET process leading to the fluorescence quenching of the C-dots. In the presence of Hg(II) ions, the FRET-quenched fluorescence emission of the C-dots-Ag NPs system was recovered owing to oxidation of Ag NPs by Hg(II) ions, so that the turn-on fluorescence intensity was directly proportional to the Hg(II) ion concentration. Accordingly, combination of the FRET system with the redox reaction was firstly utilized to construct an innovative turn-off/on fluorescent sensor for the quantification of Hg(II) ion. The calibration plot was linear in the concentration range 0.5-500.0 nmol L^-1 with a determination coefficient (R²) of 0.9965. The limit of detection and limit of quantification were 0.10 and 0.35 nmol L^-1, respectively, according to the IUPAC definition. The method was applied for the determination of Hg(II) ion in lake water, wastewater and tea samples, and the proper relative recoveries (98.0-104.0%) were obtained for the spiked samples. The method has high potential to diagnose trace values of mercuric ions in real samples with high sensitivity and repeatability.

Electrochemically triggered sensing and recovery of mercury over sodium alginate grafted polyaniline

An efficient potential triggering process has been established over chemically functionalized SA-g-PANI under optimum conditions to enable the sensing and extraction of residual mercury ions present in wastewater and soil samples.

A portable selective electrochemical sensor amplified with Fe3O4@Au-cysteamine-thymine acetic acid as conductive mediator for determination of mercuric ion

Mercury ion (Hg²⁺) is considered to be one of the most toxic heavy metal ions and can cause adverse effects on kidney function, the central nervous system, and the immune system. Therefore, it is important to develop a fast and simple method for sensitive and selective detection of Hg²⁺ in the environment. This research proposes a portable electrochemical sensor for rapid and selective detection of Hg²⁺. The sensor platform is designed based on thymine acetic acid anchored with cysteamine-conjugated core shell Fe₃O₄@Au nanoparticles (Fe₃O₄@Au/CA/T-COOH) immobilized on a sensing area of a screen-printed carbon electrode (SPCE) with the aid of an external magnetic field embedded in a homemade electrode holder for ease of handling. In the presence of Hg²⁺, the immobilized thymine combines specifically with Hg²⁺ and forms a thymine-Hg²⁺-thymine mismatch (T-Hg²⁺-T). The resulting amount of Hg²⁺ was determined by differential pulse anodic stripping voltammetry (DPASV). Under optimal conditions, the sensor exhibited two wide linearities in a range from 1 to 200 μg L^-1 and 200-2200 μg L^-1 with the reliability coefficient of determination of 0.997 and 0.999, respectively. The detection limit (LOD) and the quantification limit (LOQ) were also determined to be 0.5 μg L^-1 and 1.0 μg L^-1, respectively. The sensor was further applied for determination of Hg²⁺ in water samples, a certified reference material and fish samples. The results were compared with flow injection atomic spectroscopy-inductively coupled plasma-optical emission spectroscopy (FIAS-ICP-OES) systems as a reference method. Results obtained with the proposed sensor were relatively satisfactory, and they showed no significant differences at a 95% confidence level by t-test from the standard method. Therefore, considering its fast and simple advantages, this novel strategy provides a potential platform for construction of a Hg²⁺ electrochemical sensor.

An Electrochemical Aptasensor for Pb2+ Detection Based on Metal-Organic-Framework-Derived Hybrid Carbon

A new double-shelled carbon nanocages material was synthesized and developed an aptasensor for determining Pb²⁺ in aqueous solution. Herein, nanoporous carbon materials derived from core–shell zeolitic imidazolate frameworks (ZIFs) demonstrated excellent electrochemical activity, stability, and high specificity surface area, consequently resulting in the strong binding with aptamers. The aptamer strands would be induced to form G-quadruplex structure when Pb²⁺ was introduced. Under optimal conditions, the aptasensor exhibited a good linear relationship of Pb²⁺ concentration ranging from 0.1 to 10 μg L⁻¹ with the detection limits of 0.096 μg L⁻¹. The feasibility was proved by detecting Pb²⁺ in spiked water samples and polluted soil digestion solution. The proposed aptasensor showed excellent selectivity and reproducibility, indicating promising applications in environmental monitoring.

Simple electrochemical sensing for mercury ions in dairy product using optimal Cu2+-based metal-organic frameworks as signal reporting

A convenient sensor is developed for electrochemical assay of Hg²⁺ in dairy product using the optimal Cu²⁺-based metal-organic frameworks (Cu-MOFs) as signal reporting. Benefiting from specific recognition between Hg²⁺ and thymine (T)-rich DNA strands, the interferences of milk matrices are effectively eliminated, thereby greatly improving the accuracy of test results. Moreover, the suitable Cu-MOFs offer an efficient carrier for probe design, and the contained Cu²⁺ ions could be directly detected to output electrochemical signal of Hg²⁺ presence without labor- or time-intensive operations. Compared with previous methods, this sensor substantially simplifies the process of electrochemical measurement and facilitates highly sensitive, selective and rapid analysis of Hg²⁺ with detection limit of 4.8 fM, offering a valuable means for monitoring dairy product contamination with Hg²⁺.

l-Cysteine modified silver nanoparticles-based colorimetric sensing for the sensitive determination of Hg2+ in aqueous solutions

A simple and sensitive colorimetric sensing method was constructed for detection of Hg²⁺ in aqueous solutions and based on silver nanoparticles functionalized with l-cysteine (l-Cys-Ag NPs). In this method, adenosine triphosphate (ATP) induced aggregation of l-Cys-Ag NPs. Simultaneously, the solution colour changed from bright yellow to brown. In the presence of Hg²⁺ , Hg²⁺ chelated ATP to form a complex and reduce the degree of aggregation of l-Cys-Ag NPs and was accompanied by a colour change from brown to bright yellow. The changing values of absorbance at 390 nm were linearly correlated with concentration of Hg²⁺ over the 4.00 × 10^-8 to 1.04 × 10^-6 mol·L^-1 range, with a detection limit of 8 nM. This method was used successfully for detection of Hg²⁺ in real water samples and performed good selectivity and sensitivity. The recovery range was 91.5-109.1%, indicating that the method has vast application potential for determination of Hg²⁺ in the environment.

Synthesis and Characterization of Ru-MOFs on Microelectrode for Trace Mercury Detection

Mercury ions (Hg2+) pollution in the water environment can cause serious harm to human health. Trace Hg2+ detection is of vital importance for environmental monitoring. Herein, we report a novel design of Ru-MOFs modified gold microelectrode for Hg2+ determination. Ru-MOFs are synthesized directly by the cathodic method on gold microelectrode, with the covered area accurately controlled. Cathodic synthesized Ru-MOFs show good conductivity and are suitable to be used as the electrode surface material directly. The synergy of the pre-deposition process and the adsorption process of Ru-MOFs can effectively improves the performance of the sensor. The results show good linearity (R2 = 0.996) from 0.1 ppb to 5 ppb, with a high sensitivity of 0.583 μA ppb-1 mm-2. The limit of detection is found to be 0.08 ppb and the test process is within 6 min. Most importantly, the senor has a good anti-interference ability and the recoveries are satisfactory. This miniature electrochemical sensor has the potential for on-site detection of trace mercury in the field.

Picomolar-level detection of mercury within non-biological/biological aqueous media using ultra-sensitive polyaniline-Fe3O4-silver diethyldithiocarbamate nanostructure

Mercury as the 3rd most toxic, non-biodegradable, and carcinogenic pollutant can adversely affect the ecosystem and health of living species through its bioaccumulation within the nature that can affect the top consumer in the food chain; therefore, it is vital to sense/remove Hg²⁺ within/from aqueous media using practical approaches. To address this matter, we modified the glassy carbon electrode (GCE) with ultra-sensitive, interconnected, sulfurized, and porous nanostructure consisted of polyaniline-Fe₃O₄-silver diethyldithiocarbamate (PANi-F-S) to enhance the sensitivity, selectivity, and limit of detection (LOD) of the sensor. Obtained results showed that at optimum conditions (i.e., pH value of 7, deposition potential of - 0.8 V, and accumulation time of 120 s), for Hg²⁺ concentration ranging from 0.4 to 60 nM, the modified electrode showing linear relative coefficient of 0.9983, LOD of 0.051 nM, LOQ of 0.14 nM, and sensitivity of 1618.86 μA μM^-1 cm^-2 highlights superior sensitivity of the developed platform until picomolar level. Additionally, the modified electrode showed ideal repeatability, stability, reproducibility, and selectivity (by considering Zn²⁺, Cd²⁺ Pb²⁺, Cu²⁺, Ni²⁺, and Co²⁺ as metal interferences) and recovered more than 99% of the Hg²⁺ ions within non-biological (mineral, tap, and industrial waters) and biological (blood plasma sample) fluids. Graphical abstract.

Recent progress in chemosensors based on pyrazole derivatives

Colorimetric and fluorescent probes based on small organic molecules have become important tools in modern biology because they provide dynamic information concerning the localization and quantity of the molecules and ions of interest without the need for genetic engineering of the sample. In the past five years, these probes for ions and molecules have attracted great attention because of their biological, environmental and industrial significance combined with the simplicity and high sensitivity of absorption and fluorescence techniques. Moreover, pyrazole derivatives display a number of remarkable photophysical properties and wide synthetic versatility superior to those of other broadly used scaffolds. This review provides an overview of the recent (2016-2020) findings on chemosensors containing pyrazole derivatives (pyrazoles, pyrazolines and fused pyrazoles). The discussion focuses on the design and physicochemical properties of chemosensors in order to realize their full potential for practical applications in environmental and biological monitoring (sensing of metal ions, anions, explosives, and biomolecules). We also present our conclusions and outlook for the future.

Development of an electrochemical biosensor for impedimetric detection of tetracycline in milk

Abstract

This study dealt with the fabrication of an impedimetric biosensor based on nanomaterial modified with pencil graphite electrode for the detection of tetracycline (TET) in milk samples. For response of the impedimetric aptasensor to be improved, the influence of different parameters (immobilization time of reduced grapheme oxide, time of aptamer, and TET binding, and concentration of aptamer) was optimized. In optimum conditions, the aptasensor provided a concentration range within 1 × 10^-16 - 1 × 10^-6 M and with a limit of detection of 3 × 10^-17 M TET. The proposed impedimetric aptasensor was then used in milk samples analysis, and the acceptable recovery was achieved ranging from 92.8 to 102.1%. According to this study, the combination of an aptamer and electrochemical impedance spectroscopy is a promising method for detection of TET in milk samples with high reproducibility and stability.

Graphic abstract