A highly sensitive biosensor for tumor maker alpha fetoprotein based on poly(ethylene glycol) doped conducting polymer PEDOT

In Situ Growth of Columnar PEG on PEDOT and Its Antifouling Properties

The antifouling properties of conductive polymers have received extensive attention for biosensor and bioelectronic applications. Polyethylene glycol (PEG) is a well-known antifouling material, but the controlled regulation of the surface topography of PEG without a template remains a challenge. Here, we show a columnar structure antifouling conductive polymer brush with enhanced antifouling properties and considerable conductivity. The method involves synthesizing the 3,4-ethylenedioxythiophene monomer modified with azide (EDOT-N3), the electropolymerization of PEDOT-N3, and the in situ growth of PEG polymer brushes on PEDOT through double-click reactions. The resultant columnar structure polymer brush exhibits high electrical conductivity (3.5 Ω·cm2), ultrahigh antifouling property, electrochemical stability (capacitance retention was 93.8% after 2000 cycles of CV scans in serum), and biocompatibility.

Antifouling strategies for electrochemical sensing in complex biological media

Surface fouling poses a significant challenge that restricts the analytical performance of electrochemical sensors in both in vitro and in vivo applications. Biofouling resistance is paramount to guarantee the reliable operation of electrochemical sensors in complex biofluids (e.g., blood, serum, and urine). Seeking efficient strategies for surface fouling and establishing highly sensitive sensing platforms for applications in complex media have received increasing attention in the past. In this review, we provide a comprehensive overview of recent research efforts focused on antifouling electrochemical sensors. Initially, we present a detailed illustration of the concept about biofouling along with an exploration of four key antifouling mechanisms. Subsequently, we delve into the commonly employed antifouling strategies in the fabrication of electrochemical sensors. These encompass physical surface topography (micro/nanostructure coatings and filtration membranes) and chemical surface modifications (PEG and its derivatives, zwitterionic polymers, peptides, proteins, and various other antifouling materials). The progress in antifouling electrochemical sensors is proposed concerning the antifouling mechanisms as well as sensing capability assessments (e.g., sensitivity, stability, and practical application ability). Finally, we summarize the evolving trends in the field and highlight some key remaining limitations.

Anti-Fouling Strategies of Electrochemical Sensors for Tumor Markers

The early detection and prognosis of cancers require sensitive and accurate detection methods; with developments in medicine, electrochemical biosensors have been developed that can meet these clinical needs. However, the composition of biological samples represented by serum is complex; when substances undergo non-specific adsorption to an electrode and cause fouling, the sensitivity and accuracy of the electrochemical sensor are affected. In order to reduce the effects of fouling on electrochemical sensors, a variety of anti-fouling materials and methods have been developed, and enormous progress has been made over the past few decades. Herein, the recent advances in anti-fouling materials and strategies for using electrochemical sensors for tumor markers are reviewed; we focus on new anti-fouling methods that separate the immunorecognition and signal readout platforms.

Emerging Graphitic Carbon Nitride-based Nanobiomaterials for Biological Applications

Graphitic carbon nitride (g-CN) based nanostructures are distinctive materials with unique compositional, structural, optical, and electronic properties with exceptional band structure, moderate surface area, and exceptional thermal and chemical stability. Because of these properties, g-CN based nanomaterials have shown promising applications and higher performance in the biological avenue. This review covers the state-of-the-art synthetic strategies used for the preparation of the materials, the basic structure, and a panorama of different optimization strategies leading to improved physicochemical properties responsible for the biological application. The following sections include the recent progress in the use of g-CN based nanobiomaterials for biosensors, bioimaging, photodynamic therapy, drug delivery, chemotherapy, and the antimicrobial segment. Furthermore, we have summarized the role and evaluation of biosafety and biocompatibility of the material. Finally, the unresolved issues, plausible challenges, current status, and future perspectives for the development and design of g-CN have been summarized and are expected to promote a clinical path for the medical sector and human well-being.

Antifouling zwitterionic peptide hydrogel based electrochemical biosensor for reliable detection of prostate specific antigen in human serum

An electrochemical biosensor based on the antifouling zwitterionic peptide hydrogel (CFEFKFC) and the poly(3,4-ethylenedioxythiophene) (PEDOT) was fabricated to accurately detect prostate specific antigen (PSA) in complex human serum. The electrode was modified with the conducting polymer PEDOT and gold nanoparticles (AuNPs) in sequence through electrodeposition, and then the designed zwitterionic peptide hydrogel prepared through self-assembly was immobilized onto the modified electrode surface via the Au-S bond. The zwitterionic peptide hydrogel with cysteine terminal is easy for immobilization onto the gold surface, and it is also suitable for the immobilization of biomolecules such as PSA antibody in this work, through the formation of covalent amide bonds. The peptide hydrogel possessed excellent antifouling property, and it was able to effectively prevent the adsorption of nonspecific proteins, cells and other biomolecules. The developed antifouling biosensor showed a linear response range from 0.1 ng mL^-1 to 100 ng mL^-1, with a low limit of detection down to 5.6 pg mL^-1. These results encourage the wide use of zwitterionic peptide hydrogels as antifouling materials in various sensing and bio-sensing devices.

Detection of Pb2+ in Tea Using Aptamer Labeled with AIEgen Nanospheres Based on MOFs Sensors

Tea is an important economic crop and health beverage in China. The presence of heavy metal ions in tea poses a significant threat to public health. Here, we prepared an aptamer biosensor labelled with AIEgen nanospheres to detect Pb²⁺ in tea. The dsDNA modified by amino and phosphoric acid was combined with the carboxylated AIEgen NPs to form AIEgen-DNA with a fluorescence group, which was then fixed to the surface of Zr-MOFs to quench the fluorescence of AIEgen NPs. At the same time, PEG was added to remove nonspecific adsorption. Then Pb²⁺ was added to cut the DNA sequences containing the cutting sites, and AIEgen NPs and part of the DNA sequences were separated from the Zr-MOFs surface to recover the fluorescence. By comparing the fluorescence changes before and after adding Pb²⁺, the detection limit of Pb²⁺ can reach 1.70 nM. The fluorescence sensor was applied to detect Pb²⁺ in tea, and the detection results showed that the tea purchased on the market did not contain the concentration of Pb²⁺ within the detection range. This study provides new insights into monitoring food and agriculture-related pollutants based on fluorescent biosensors.

Recent Developments and Implementations of Conductive Polymer-Based Flexible Devices in Sensing Applications

Flexible sensing devices have attracted significant attention for various applications, such as medical devices, environmental monitoring, and healthcare. Numerous materials have been used to fabricate flexible sensing devices and improve their sensing performance in terms of their electrical and mechanical properties. Among the studied materials, conductive polymers are promising candidates for next-generation flexible, stretchable, and wearable electronic devices because of their outstanding characteristics, such as flexibility, light weight, and non-toxicity. Understanding the interesting properties of conductive polymers and the solution-based deposition processes and patterning technologies used for conductive polymer device fabrication is necessary to develop appropriate and highly effective flexible sensors. The present review provides scientific evidence for promising strategies for fabricating conductive polymer-based flexible sensors. Specifically, the outstanding nature of the structures, conductivity, and synthesis methods of some of the main conductive polymers are discussed. Furthermore, conventional and innovative technologies for preparing conductive polymer thin films in flexible sensors are identified and evaluated, as are the potential applications of these sensors in environmental and human health monitoring.

Conducting Polymer-Coated Carbon Cloth Captures and Releases Extracellular Vesicles by a Rapid and Controlled Redox Process

Electrochemical techniques offer great opportunities for the capture of chemical and biological entities from complex mixtures and their subsequent release into clean buffers for analysis. Such methods are clean, robust, rapid, and compatible with a wide range of biological fluids. Here, we designed an electrochemically addressable system, based on a conducting terpolymer [P(EDOT-co-EDOTSAc-co-EDOTEG)] coated onto a carbon cloth substrate, to selectively capture and release biological entities using a simple electrochemical redox process. The conducting terpolymer composition was optimized and the terpolymer-coated carbon cloth was extensively characterized using electrochemical analysis, Raman and Fourier transform-infrared spectroscopy, water contact angle analysis, and scanning electron microscopy. The conductive terpolymer possesses a derivative of EDOT with an acetylthiomethyl moiety (EDOTSAc), which is converted into a "free" thiol that then undergoes reversible oxidation/reduction cycles at +1.0 V and -0.8 V (vs Ag/AgCl), respectively. That redox process enables electrochemical capture and on-demand release. We first demonstrated the successful electrochemical capture/release of a fluorescently labeled IgG antibody. The same capture/release procedure was then applied to release extracellular vesicles (EVs), originating from both MCF7 and SKBR3 breast cancer cell line bioreactors. EVs were captured using the substrate-conjugated HER2 antibody which was purified from commercially available trastuzumab. Capture and release of breast cancer EVs using a trastuzumab-derived HER2 antibody has not been reported before (to the best of our knowledge). A rapid (2 min) release at a low potential (-0.8 V) achieved a high release efficiency (>70%) of the captured, HER2+ve, SKBR3 EVs. The developed system and the electrochemical method are efficient and straightforward and have vast potential for the isolation and concentration of various biological targets from large volumes of biological and other (e.g., environmental) samples.

Biorecognition antifouling coatings in complex biological fluids: a review of functionalization aspects

Recent progress in biointerface research has highlighted the role of antifouling functionalizable coatings in the development of advanced biosensors for point-of-care bioanalytical and biomedical applications dealing with real-world complex samples. The resistance to nonspecific adsorption promotes the biorecognition performance and overall increases the reliability and specificity of the analysis. However, the process of modification with biorecognition elements (so-called functionalization) may influence the resulting antifouling properties. The extent of these effects concerning both functionalization procedures potentially changing the surface architecture and properties, and the physicochemical properties of anchored biorecognition elements, remains unclear and has not been summarized in the literature yet. This critical review summarizes these key functionalization aspects with respect to diverse antifouling architectures showing low or ultra-low fouling quantitative characteristics in complex biological media such as bodily fluids or raw food samples. The subsequent discussion focuses on the impact of functionalization on fouling resistance. Furthermore, this review discusses some of the drawbacks of available surface sensitive characterization methods and highlights the importance of suitable assessment of the resistance to fouling.

Cerium oxide-doped PEDOT nanocomposite for label-free electrochemical immunosensing of anti-p53 autoantibodies

A label-free nanoimmunosensor is reported based on p53/CeO₂/PEDOT nanobiocomposite-decorated screen-printed gold electrodes (SPAuE) for the electrochemical detection of anti-p53 autoantibodies. CeO₂ nanoparticles (NPs) were synthesized and stabilized with cyanopropyltriethoxysilane by a soft chemistry method. The nanoimmunosensing architecture was prepared by in situ electropolymerization of 3,4-ethylenedioxythiophene (EDOT) on SPAuE in the presence of CeO₂ NPs. The CeO₂ NPs and Ce/PEDOT/SPAuE were characterized by scanning and transmission electron microscopy, dynamic and electrophoretic light scattering, ultraviolet-visible spectrophotometry, X-ray diffraction, Fourier-transform infrared spectroscopy, cyclic voltammetry, and electrochemical impedance spectroscopy. Ce/PEDOT/SPAuE was biofunctionalized with p53 antigen by covalent bonding for the label-free determination of anti-p53 autoantibodies by differential pulse voltammetry. The nanobiocomposite-based nanoimmunosensor detected anti-p53 autoantibodies in a linear range from 10 to 1000 pg mL^-1, with a limit of detection (LOD) of 3.2 pg mL^-1. The nanoimmunosensor offered high specificity, selectivity, and long-term storage stability with great potential to detect anti-p53 autoantibodies in serum samples. Overall, incorporating organo-functional nanoparticles into polymeric matrices can provide a simple-to-assemble, rapid, and ultrasensitive approach for on-site screening of anti-p53 autoantibodies and other disease-related biomarkers with low sample volumes.

Rational design of smart nano-platforms based on antifouling-nanomaterials toward multifunctional bioanalysis

The ability to design nanoprobe devices with the capability of quantitative/qualitative operation in complex media will probably underpin the main upcoming progress in healthcare research and development. However, the biomolecules abundances in real samples can considerably alter the interface performance, where unwanted adsorption/adhesion can block signal response and significantly decrease the specificity of the assay. Herein, this review firstly offers a brief outline of several significances of fabricating high-sensitivity and low-background interfaces to adjust various targets' behaviors induced via bioactive molecules on the surface. Besides, some important strategies to resist non-specific protein adsorption and cell adhesion, followed by imperative categories of antifouling reagents utilized in the construction of high-performance solid sensory interfaces, are discussed. The next section specifically highlights the various nanocomposite probes based on antifouling-nanomaterials for electrode modification containing carbon nanomaterials, noble metal nanoparticles, magnetic nanoparticles, polymer, and silicon-based materials in terms of nanoparticles, rods, or porous materials through optical or chemical strategies. We specially outline those nanoprobes that are capable of identification in complex media or those using new constructions/methods. Finally, the necessity and requirements for future advances in this emerging field are also presented, followed by opportunities and challenges.

An ultrasensitive biosensor for prostate specific antigen detection in complex serum based on functional signal amplifier and designed peptides with both antifouling and recognizing capabilities

The development of biosensors capable of averting biofouling and detecting biomarkers in complex biological media remains a challenge. Herein, an ultralow fouling and highly sensitive biosensor based on specifically designed antifouling peptides and a signal amplification strategy was designed for prostate specific antigen (PSA) detection in human serum. A low fouling layer of poly(ethylene glycol) (PEG) doped the conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT) was electrodeposited on the electrode surface, followed by the immobilization of streptavidin and further attachment of biotin-labelled peptides. The peptide was designed to include PSA specific recognition domain (HSSKLQK) and antifouling domain (PPPPEKEKEKE), and the terminal of the peptide was functionalized with -SH group. DNA functionalized gold nanorods (DNA/AuNRs) were then attached to the electrode, and methylene blue (MB) molecules were adsorbed to the DNA to form the signal amplifier. In the presence of PSA, the peptide was specifically cleaved and resulted in the loss of AuNRs together with DNA and MB, and thus significant decrease of the current signal. The biosensor exhibited a low limit of detection (LOD) of 0.035 pg mL^-1 (S/N = 3), with a wide linear range from 0.10 pg mL^-1 to 10.0 ng mL^-1, and it was able to detect PSA in real human serum owing to the presence of the antifouling peptides, indicating great potential of the constructed biosensor for practical application.

Carbon-based aerogels for biomedical sensing: Advances toward designing the ideal sensor

Carbon based aerogels are special solid-state materials comprised of interconnected networks of 3D nanostructures with high amount of air-filled nanoporous. They expand the structural properties along with physicochemical characteristics of nanoscale construction blocks to macroscale, and incorporate distinctive attributes of aerogels, like large surface area, high porosity, and low density, with particular features of the different constituents. These features impart aerogels with rapid response signal, high selectivity, and ultra-sensitivity for sensing diverse targets in biomedical media. This has prompted researchers to develop a variety of aerogel-based sensors with encouraging achievements. Hence, this work outlines sensing applications of aerogel-based sensors with a comprehensive overview on the carbon aerogel hybrid materials and their analytical performances. Authors tried to list advantages and limitations of the developed approach and introduced more potent research for possible devices designing. We also point out some challenges and future perspectives related to the improvement of high-efficiency aerogel-based sensors.

Probing polymer brushes with electrochemical impedance spectroscopy: a mini review

Polymer brushes are frequently used as surface-tethered antifouling layers in biosensors to improve sensor surface-analyte recognition in the presence of abundant non-target molecules in complex biological samples by suppressing nonspecific interactions. However, because brushes are complex systems highly responsive to changes in their surrounding environment, studying their properties remains a challenge. Electrochemical impedance spectroscopy (EIS) is an emerging method in this context. In this mini review, we aim to elucidate the potential of EIS for investigating the physicochemical properties and structural aspects of polymer brushes. The application of EIS in brush-based biosensors is also discussed. Most common principles employed in these biosensors are presented, as well as interpretation of EIS data obtained in such setups. Overall, we demonstrate that the EIS-polymer brush pairing has a considerable potential for providing new insights into brush functionalities and designing highly sensitive and specific biosensors.

Antifouling Aptasensor Based on Self-Assembled Loop-Closed Peptides with Enhanced Stability for CA125 Assay in Complex Biofluids

A brief and universal ultralow fouling sensing platform capable of assaying targets in complex biofluids was developed based on designed antifouling peptides that could form a loop-closed structure with enhanced stability. The newly designed peptide with thiol groups in its two terminals self-assembled onto a gold nanoparticle (AuNP)-modified electrode surface to form a stable loop structure, which displayed excellent antifouling performance, outstanding stability under enzymatic hydrolysis, and satisfactory long-term antifouling capability in complex biofluids (clinical human serum). The antifouling and highly sensitive electrochemical aptasensor was constructed via one-step co-immobilization of the designed peptides and aptamers onto the electrode surface modified with electrodeposited poly(3,4-ethylenedioxythiophene) (PEDOT) and AuNPs. The developed peptide-based aptasensor exhibited a decent response for the analysis of the cancer antigen 125 (CA125), with a relatively wide linear range (0.1-1000 U mL^-1) and a low limit of detection (0.027 U mL^-1), and was capable of detecting CA125 in clinical serum samples with acceptable accuracy. This antifouling strategy-based self-assembled peptide with a loop-closed structure provided a potential path for the development of various low-fouling biosensors for application in complex biological fluids.

A new biocompatible silver/polypyrrole composite with in vitro antitumor activity

We used an in situ chemical oxidation method to prepare a new composite of silver nanoparticles (AgNPs) with polypyrrole (PPy), whose properties were optimized through a 2³-factorial design of the synthesis conditions. The successful formation of the AgNPs/PPy composite was confirmed by UV-Visible and FTIR spectroscopies. Transmission electron microscopy revealed the presence of AgNPs smaller than 100 nm, dispersed into the PPy matrix. This hybrid composite exhibits a blue fluorescence emission after excitation in the ultraviolet region. In MTT assays, the AgNPs/PPy composite exhibited low cytotoxicity toward non-tumoral cell lines (fibroblast, Vero, and macrophages) and selectively inhibited the viability of HeLa cells. The AgNPs/PPy composite induces ultrastructural changes in HeLa cells that are consistent with the noticeable selectivity exhibited toward them when compared to its action against non-tumoral cell lineages. Also, the AgNPs/PPy exhibited a hemolytic activity below 14% for all blood groups tested, at concentrations up to 125 μg/mL. These results suggest that the AgNPs/PPy composite has a promising potential for use as an antitumoral agent.

Porous polymeric membranes: fabrication techniques and biomedical applications

Porous polymeric membranes have shown great potential in biological and biomedical applications such as tissue engineering, bioseparation, and biosensing, due to their structural flexibility, versatile surface chemistry, and biocompatibility. This review outlines the advantages and limitations of the fabrication techniques commonly used to produce porous polymeric membranes, with especial focus on those featuring nano/submicron scale pores, which include track etching, nanoimprinting, block-copolymer self-assembly, and electrospinning. Recent advances in membrane technology have been key to facilitate precise control of pore size, shape, density and surface properties. The review provides a critical overview of the main biological and biomedical applications of these porous polymeric membranes, especially focusing on drug delivery, tissue engineering, biosensing, and bioseparation. The effect of the membrane material and pore morphology on the role of the membranes for each specific application as well as the specific fabrication challenges, and future prospects of these membranes are thoroughly discussed.

Antifouling Strategies for Electrochemical Biosensing: Mechanisms and Performance toward Point of Care Based Diagnostic Applications

Although there exist numerous established laboratory-based technologies for sample diagnostics and analyte detection, many medical and forensic science applications require point of care based platforms for rapid on-the-spot sample analysis. Electrochemical biosensors provide a promising avenue for such applications due to the portability and functional simplicity of the technology. However, the ability to develop such platforms with the high sensitivity and selectivity required for analysis of low analyte concentrations in complex biological samples remains a paramount issue in the field of biosensing. Nonspecific adsorption, or fouling, at the electrode interface via the innumerable biomolecules present in these sample types (i.e., serum, urine, blood/plasma, and saliva) can drastically obstruct electrochemical performance, increasing background "noise" and diminishing both the electrochemical signal magnitude and specificity of the biosensor. Consequently, this review aims to discuss strategies and concepts used throughout the literature to prevent electrode surface fouling in biosensors and to communicate the nature of the antifouling mechanisms by which they operate. Evaluation of each antifouling strategy is focused primarily on the fabrication method, experimental technique, sample composition, and electrochemical performance of each technology highlighting the overall feasibility of the platform for point of care based diagnostic/detection applications.

Introduction of an antifouling photoelectrode: an effective strategy for a high-performance photoelectrochemical cytosensor

As nonspecific adsorption or biofouling has obvious side effects on the selectivity, it is a great challenge for cytosensors to detect target cells in practical biological samples. In this study, we first propose the design and synthesis of an antifouling photoelectrode. The antifouling photoelectrode not only has the desired photocurrent response, but also possesses an unexpected antifouling capability of resisting nonspecific adsorption of biomolecules. Herein, the PEDOT-HPG/SnS/ZnO-NT antifouling photoelectrode was formed and a robust photoelectrochemical cytosensor with enhanced sensitivity and selectivity has been demonstrated.

Development strategies of conducting polymer-based electrochemical biosensors for virus biomarkers: Potential for rapid COVID-19 detection

Rapid, accurate, portable, and large-scale diagnostic technologies for the detection of severe acute respiratory syndrome-coronavirus-2 (SARS-CoV-2) are crucial for controlling the coronavirus disease (COVID-19). The current standard technologies, i.e., reverse-transcription polymerase chain reaction, serological assays, and computed tomography (CT) exhibit practical limitations and challenges in case of massive and rapid testing. Biosensors, particularly electrochemical conducting polymer (CP)-based biosensors, are considered as potential alternatives owing to their large advantages such as high selectivity and sensitivity, rapid detection, low cost, simplicity, flexibility, long self-life, and ease of use. Therefore, CP-based biosensors can serve as multisensors, mobile biosensors, and wearable biosensors, facilitating the development of point-of-care (POC) systems and home-use biosensors for COVID-19 detection. However, the application of these biosensors for COVID-19 entails several challenges related to their degradation, low crystallinity, charge transport properties, and weak interaction with biomarkers. To overcome these problems, this study provides scientific evidence for the potential applications of CP-based electrochemical biosensors in COVID-19 detection based on their applications for the detection of various biomarkers such as DNA/RNA, proteins, whole viruses, and antigens. We then propose promising strategies for the development of CP-based electrochemical biosensors for COVID-19 detection.

Functional Molecular Interfaces for Impedance-Based Diagnostics

In seeking to develop and optimize reagentless electroanalytical assays, a consideration of the transducing interface features lies key to any subsequent sensitivity and selectivity. This review briefly summarizes some of the most commonly used receptive interfaces that have been employed within the development of impedimetric molecular sensors. We discuss the use of high surface area carbon, nanoparticles, and a range of bioreceptors that can subsequently be integrated. The review spans the most commonly utilized biorecognition elements, such as antibodies, antibody fragments, aptamers, and nucleic acids, and touches on some novel emerging alternatives such as nanofragments, molecularly imprinted polymers, and bacteriophages. Reference is made to the immobilization chemistries available along with a consideration of both optimal packing density and recognition probe orientation. We also discuss assay-relevant mechanistic details and applications in real sample analysis.

Polymers and Plastics Modified Electrodes for Biosensors: A Review

Polymer materials offer several advantages as supports of biosensing platforms in terms of flexibility, weight, conformability, portability, cost, disposability and scope for integration. The present study reviews the field of electrochemical biosensors fabricated on modified plastics and polymers, focusing the attention, in the first part, on modified conducting polymers to improve sensitivity, selectivity, biocompatibility and mechanical properties, whereas the second part is dedicated to modified "environmentally friendly" polymers to improve the electrical properties. These ecofriendly polymers are divided into three main classes: bioplastics made from natural sources, biodegradable plastics made from traditional petrochemicals and eco/recycled plastics, which are made from recycled plastic materials rather than from raw petrochemicals. Finally, flexible and wearable lab-on-a-chip (LOC) biosensing devices, based on plastic supports, are also discussed. This review is timely due to the significant advances achieved over the last few years in the area of electrochemical biosensors based on modified polymers and aims to direct the readers to emerging trends in this field.

Designed antifouling peptides planted in conducting polymers through controlled partial doping for electrochemical detection of biomarkers in human serum

An antifouling electrochemical biosensing platform was constructed based on conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT) planted with designed peptides. The designed peptides containing doping and antifouling sequences were anchored to an electrode surface, followed by the electrochemical polymerization of PEDOT. The negatively charged doping sequence of the peptide was gradually doped into the PEDOT during the polymerization process, and by controlling the polymerization time, it was able to exactly dope the whole doping sequence into the PEDOT film, leaving the antifouling sequence of the peptide stretched out of the PEDOT surface. Therefore, an excellent conducting and antifouling platform was constructed just like planting a peptide tree in the PEDOT soil. With antibodies immobilized on the peptide, an antifouling electrochemical biosensor for the detection of a typical biomarker CA15-3 was developed. Owing to the unique properties of the conducting polymer PEDOT and the antifouling peptide, the electrochemical biosensor exhibited high sensitivity and long-term stability, and it was capable of detecting CA15-3 in serum of breast cancer patients without suffering from biofouling. The strategy of planting designed antifouling peptides in conducting polymers offered an effective way to develop electrochemical sensors for practical biomarkers assaying in complex biological samples.

Designed Three-in-One Peptides with Anchoring, Antifouling, and Recognizing Capabilities for Highly Sensitive and Low-Fouling Electrochemical Sensing in Complex Biological Media

Nonspecific adsorption is of great concern for electrochemical biosensors performing in complex biological media, and various antifouling materials have been introduced into the sensing interfaces to improve the antifouling capability of different biosensors. However, for most of the biosensors with antifouling materials and sensing probes coexisting in the sensing interfaces, either the antifouling materials will impair the sensing performances or the sensing probes will affect the antifouling ability. Herein, a facile and efficient antifouling biosensor was developed based on a newly designed three-in-one peptide with anchoring, antifouling, and recognizing capabilities. One end of the designed peptide is a unique anchoring part that is rich in amine groups, and this part can be anchored to the poly(3,4-ethylenedioxythiophene) (PEDOT)-citrate film electrodeposited on a glassy carbon electrode. The other end of the peptide is a recognizing part that can specifically bind to the aminopeptidase N (APN) and human hepatocellular carcinoma cells (HepG2 cells). Meanwhile, the middle part of the peptide, together with the anchoring part, was designed to be antifouling. With this designed multifunctional peptide, highly sensitive and low-fouling biosensors capable of assaying target APN and HepG2 cells in complex biological media can be easily prepared, with detection limits of 0.4 ng·mL^-1 and 20 cells·mL^-1, respectively. This antifouling biosensor is feasible for practical target detection in real complex samples, and it is highly expected that this peptide designing strategy may be extended to the development of various antifouling biosensors.

Polydopamine-PEG-Folic Acid Conjugate Film Engineered TiO2 Nanotube Arrays for Photoelectrochemical Sensing of Folate Binding Protein

Serum-soluble folate binding protein (FBP) is an important tumor marker, and the development of a simple biosensing method is highly needed. In this work, a photoelectrochemical (PEC) biosensor for the detection of FBP was proposed based on the construction of an antifouling interface and the unique ligand-protein recognition. The PEC sensing platform was prepared by the biomimetic polydopamine (PDA) coating on TiO₂ nanotubes arrays (NTAs). A significant PEC enhancement effect was obtained due to the macroporous structures. Excellent antifouling performance was achieved by conjugation of amino-group-terminated 8-arm poly(ethylene glycol) (PEG). The incorporation of folic acid (FA) retains the antifouling property and shows recognition abilities toward FBP. The fabricated PEC biosensor shows good analytical performance. The combination of ligand-protein recognition and a PEC antifouling interface provides a good consideration for the development of FBP biosensors.

Electrodeposited poly(3,4-ethylenedioxythiophene) doped with graphene oxide for the simultaneous voltammetric determination of ascorbic acid, dopamine and uric acid

Poly(3,4-ethylenedioxythiophene) (PEDOT) films were electrodeposited by cyclic voltammetry on a glassy carbon electrode (GCE) in aqueous solution. Three kinds of supporting electrolytes were used, viz. graphene oxide (GO), phosphate buffered saline (PBS), and GO in PBS, respectively. The surface morphology of the modified electrodes was characterized by scanning electron microscopy. The electrochemical performance of the modified electrodes was investigated by cyclic voltammetry and electrochemical impedance spectroscopy by using the hexacyanoferrate redox system. The results demonstrate that the PEDOT-GO/GCE, which was electropolymerized in aqueous solutions containing EDOT and GO, shows the best electrochemical activities compared with other modified electrodes. The electrochemical behaviors of ascorbic acid (AA), dopamine (DA) and uric acid (UA) were investigated by cyclic voltammetry. The PEDOT-GO/GCE exhibits enhanced electrocatalytic activities towards these important biomolecules. Under physiological pH conditions and in the mixed system of AA, DA and UA, the modified GCE exhibits the following figures of merit: (a) a linear voltammetric response in the concentration ranges of 100-1000 μM for AA, 6.0-200 μM for DA, and 40-240 μM for UA; (b) well separated oxidation peaks near 31, 213 and 342 mV (vs. saturated Ag/AgCl) for AA, DA and UA, respectively; and (c) detection of limits (at S/N = 3) of 20, 2.0 and 10 μM. The results demonstrate that GO, based on its relatively large number of anionic sites, can be used as the sole weak electrolyte and charge balance dopant for the preparation of functionally doped conducting polymers by electrodeposition. Graphical abstractSchematic representation of a nanostructure composed of hybrid conducting polymer PEDOT-GO nanocomposites, and its application to simultaneous determination of ascorbic acid, dopamine and uric acid.

Antifouling strategies in advanced electrochemical sensors and biosensors

A review presented recent development of antifouling strategies in electrochemical sensors and biosensors based on the modification methods.

Phytic acid doped poly(3,4-ethylenedioxythiophene) modified with copper nanoparticles for enzymeless amperometric sensing of glucose

A nanocomposite consisting of phytic acid (PA) that was doped with poly(3,4-ethylenedioxy-thiophene) (PEDOT) and modified with copper nanoparticles (CuNPs) was placed on a glassy carbon electrode and then applied in an enzymeless glucose sensor. The undulating PEDOT/PA composite has good conductivity and a large surface area, which was suitable as substrate for the uniform growth of CuNPs. The modified electrode typically operated at a potential near 0.55 V (vs. Ag/AgCl) demonstrated remarkable catalytic activity towards direct oxidation of glucose in NaOH solution (the major limitation of this sensor). Figures of merit include (a) a wide analytical range (5 to 403 μM); (b) high sensitivity (79.27 μA·μM^-1·cm^-2), (c) a low detection limit (0.28 μM at a signal to noise ratio of 3), and (d) fast response (< 4 s). Graphical abstractA nanocomposite of phytic acid (PA) doped poly(3,4-ethylenedioxy-thiophene) (PEDOT) modified with copper nanoparticles (CuNPs) onto a glassy carbon electrode was prepared by electrochemical strategy. The CuNPs/PEDOT/PA-modified electrodes were applied in enzymeless glucose sensors with high performance.

Photoelectrochemical Biosensor for Sensitive Detection of Soluble CD44 Based on the Facile Construction of a Poly(ethylene glycol)/Hyaluronic Acid Hybrid Antifouling Interface

The serum level of soluble CD44 is directly associated with several clinicopathological parameters of malignant diseases. There is a great need for the development of an easy and cost-effective detection method for soluble CD44 for both the diagnosis and the treatment of cancers. In this work, a simple photoelectrochemical (PEC) method for the sensitive detection of serum-soluble CD44 is proposed based on the construction of a hybrid antifouling coating on the TiO₂ substrate. Hyaluronic acid (HA) and poly(ethylene glycol) (PEG) are co-immobilized using a biomimetic one-step surface functionalization approach. The immobilized HA shows strong recognition abilities toward soluble CD44, and the synergistic antifouling effect achieved by the combination of PEG and HA improves the sensing specificity. Based on the inhibitory effect of CD44 recognition on the PEC signal of the TiO₂ substrate, a PEC biosensor is developed with a wide response range and a low detection limit. The development of antibody-free biosensors may promote the application of soluble CD44 as a biomarker for the diagnosis and treatment of malignant diseases.

A label-free immunosensor based on PHEMA/graphene oxide nanocomposite for simultaneous electrochemical determination of alpha fetoprotein

An electrochemical immunosensor based on poly(2-hydroxyethyl methacrylate) (PHEMA)/graphene oxide (GO) nanocomposite was designed in a simple way for the ultrasensitive detection of tumor makers (alpha-fetoprotein, AFP as a model). PHEMA with excellent biocompatibility, provides a large number of sites for connecting signal molecules. After modification with signal molecules, the functional PHEMA significantly improved the sensitivity of electrochemical detection. In order to immobilize antibodies, GO was introduced and used to construct a nanocomposite as a substrate. The designed AFP immunosensor showed favorable selectivity and excellent stability. Meanwhile, it has a low detection limit of 0.403 pg mL-1. Furthermore, the immunosensor was used to detect target AFP in human serum, demonstrating the feasibility of clinical diagnosis.

Low-fouling and highly sensitive fluorescence immunoassay of protein in serum based on the antifouling magnetic beads

Aim: A low-fouling and highly sensitive fluorescence immunoassay for protein detection in serum was proposed, and IgG was used as a model protein. Materials & methods: SH-PEG-NH2 serving as antifouling coating was conjugated with carboxyl Fe3O4 nanoparticles, and then, the thiol groups were conjugated with antibody via the covalent binding. IgG was captured through magnetic immunoreaction. Highly fluorescent quantum dots modified with streptavidin (SA-QDs) were united with biotin modified IgG antibody to form the sandwich structure. Results & conclusion: The fluorescence immunoassay was able to detect IgG with a detection limit of 3.89 ng/ml in buffer and 5.0 ng/ml in serum with satisfying selectivity and acceptable reproducibility, which demonstrated its potential application in quantitative analysis of real patient serum samples.

Progress in research on gold nanoparticles in cancer management

INTRODUCTION

The rapid advancement of nanotechnology in recent years has fuelled burgeoning interest in the field of nanoparticle research, particularly its application in cancer management. At present, there seems to be heightened interest in the application of gold nanoparticles (AuNPs) to the management of cancer, encompassing diagnosis, monitoring, and treatment. AuNPs could be used as drug delivery agents that target cancer cells or in gene therapy. These efforts are undertaken in the hope of revolutionizing current methods and strategies for cancer treatment. This review will focus on the current applications of AuNPs in cancer management. OBJECTIVES, DATA SOURCES, STUDY APPRAISAL AND SYNTHESIS METHODS, RESULTS:: objectives, data sources, study eligibility criteria, participants, and interventions, study appraisal and synthesis methods, results are not required, as the study will be a literature review. Just introduction, ethics and dissemination, and conclusion are applicable.

ETHICS AND DISSEMINATION

Ethical approval and informed consent are not required, as the study is a literature review and does not involve direct contact with patients or alterations to patient care.

CONCLUSION

AuNPs have many properties that are of great value for the diagnosis and treatment of tumors. AuNPs are small in size and can penetrate widely and deposit on the tumor site, bind to many proteins and drugs, target delivery drugs, and have good biocompatibility. The application of AuNPs in the diagnosis and treatment of tumors is very considerable. In the near future, AuNPs will certainly play an important role in the treatment of tumors.