Water-soluble gold nanoclusters prepared by protein-ligand interaction as fluorescent probe for real-time assay of pyrophosphatase activity

Label-free direct detection of melamine using functionalized gold nanoparticles-based dual-fluorescence colorimetric nanoswitch sensing platform

Developing a simple, economical, sensitive, and selective method for label-free direct detection analytes is attractive, especially the strategies that could achieve signal amplification without complicated operations. Herein, a dual-fluorescence colorimetric nanoswitch sensing platform for label-free direct melamine (MEL) detection was established. We first explored the relationship between MEL-induced aggregation of gold nanoparticles (AuNPs) and size and determined the optimal size to be 37 nm. Using surfactant Triton X-100 to modify AuNPs and clarify possible interaction mechanisms to improve detection performance. The dynamic changes of surface plasmon resonance absorption peaks in the dispersed and aggregated states of AuNPs were skillfully utilized to match the emission of multicolor gold nanoclusters to trigger the multi-inner filter effect. Accompanied by the addition of MEL-induced AuNPs to change from dispersed to aggregated state, the fluorescence of green-emitting and red-emitting gradually turned on and turned off, respectively. The fluorescence turn-on mode detection limit was 10 times higher than the colorimetric method and as low as 5.5 ng/mL; the detection took only 10 min. The sensor detected MEL in spiked milk samples with a good recovery in the range of 81.2-111.0 % with a coefficient of variation less than 11.4 % and achieved a good correlation with commercial kits. The proposed sensor integrates numerous merits of label-free, multi-signal readout, self-calibration, simple operations, and economical, which provides a promising tool for convenient on-site detection of MEL.

A Semi-Automatic Environmental Monitoring Device for Mercury and Cobalt Ion Detection

A syringe-based, semi-automatic environmental monitoring device is developed for on-site detection of harmful heavy metal ions in water. This portable device consists of a spring-embedded syringe and a polydimethylsiloxane (PDMS) membrane-based flow regulator for semi-automatic fix-and-release fluidic valve actuation, and a paper-based analytical device (PAD) with two kinds of gold nanoclusters (AuNCs) for sensitive Hg2+ and Co2+ ion detection, respectively. The thickness of the elastic PDMS membrane can be adjusted to stabilize and modulate the flow rates generated by the pushing force provided by the spring attached to the plunger. Also, different spring constants can drastically alter the response time. People of all ages can extract the fix-volume sample solutions and then release them to automatically complete the detection process, ensuring high reliability and repeatability. The PAD comprises two layers of modified paper, and each layer is immobilized with bovine serum albumin-capped gold nanoclusters (R-AuNCs) and glutathione-capped gold clusters (G-AuNCs), respectively. The ligands functionalized on the surface of the AuNCs not only can fine-tune the optical properties of the nanoclusters but also enable specific and simultaneous detection of Hg2+ and Co2+ ions via metallophilic Au+ -Hg2+ interaction and the Co2+ -thiol complexation effect, respectively. The feasibility of the device for detecting heavy metal ions at low concentrations in various environmental water samples is demonstrated. The Hg2+ and Co2+ ions can be seen simultaneously within 20 min with detection limits as low as 1.76 nm and 0.27 µm, respectively, lower than those of the regulatory restrictions on water by the US Environmental Protection Agency and the European Union. we expect this sensitive, selective, portable, and easy-to-use device to be valid for on-site multiple heavy metal ion pollution screenings in resource-constrained settings.

Promoting the healing of methicillin-resistant Staphylococcus aureus-infected wound by a multi-target antimicrobial AIEgen of 6-Aza-2-thiothymine-decorated gold nanoclusters

The use of conventional antibiotic therapies is in question owing to the emergence of drug-resistant pathogenic bacteria. Therefore, novel, highly efficient antibacterial agents to effectively overcome resistant bacteria are urgently needed. Accordingly, in this work, we described a novel class luminogen of 6-Aza-2-thiothymine-decorated gold nanoclusters (ATT-AuNCs) with aggregation-induced emission property that possessed potent antimicrobial activity against methicillin-resistant Staphylococcus aureus (MRSA). Scanning electron microscopy was performed to investigate the interactions between ATT-AuNCs and MRSA. In addition, ATT-AuNCs exhibited excellent ROS generation efficiency and could effectively ablate MRSA via their internalization to the cells. Finally, tandem mass tag-labeling proteome analysis was carried out to investigate the differential expression proteins in MRSA strains. The results suggested that ATT-AuNCs killed MRSA cells through altering the expression of multiple target proteins involved in DNA replication, aminoacyl-tRNA synthesis, peptidoglycan and arginine biosynthesis metabolism. Parallel reaction monitoring technique was further used for the validation of these proteome results. ATT-AuNCs could also be served as a wound-healing agent and accelerate the healing process. Overall, we proposed ATT-AuNCs could serve as a robust antimicrobial aggregation-induced emission luminogen (AIEgen) that shows the ability to alter the activities of multiple targets for the elimination of drug-resistant bacteria.

Protein-directed synthesis of fluorescent sulfur quantum dots for highly robust detection of pyrophosphate

Inorganic pyrophosphate anions (PPi) play a key role in various biological processes and act as an essential indicator for physiological function evaluation and disease diagnosis. However, there is still a lack of available approaches for straightforward, robust, and convenient PPi detection. Herein, we design an on-off-on fluorescent switching nanoprobe employing Fe³⁺-mediated fluorescent sulfur quantum dots (SQDs) for highly robust detection of PPi. The bovine serum protein (BSA)-capped SQDs with fine water dispersibility and good optical stability are synthesized by an H₂O₂-assisted chemical etching reaction. Specifically, Fe³⁺ can strongly induce the aggregation of the SQDs into relatively larger sizes, resulting in aggregation-induced fluorescence quenching behavior. PPi can selectively bind with Fe³⁺ via emulative coordination and in preventing the aggregation of SQDs this is accompanied by recovery of fluorescence. The physicochemical properties of aggregated and disaggregated SQDs have been systematically investigated. Aggregation and disaggregation of the SQDs and the corresponding quenching and recovery of fluorescence occurs and guarantees the high-contrast sensing performance of the SQD system in complex and challenging aquatic environments. Our designed on-off-on nanoswitch holds great potential for the design of elemental quantum dot-based biosensors for the highly robust detection of analytes in the near future.

Strongly phosphorescent and water-soluble gold(I)-silver(I)-cysteine nanoplatelets via versatile small biomolecule cysteine-assisted synthesis for intracellular hypochlorite detection

In biological systems, abnormal levels of hypochlorite (ClO^-) could result in cell dysfunctions. Herein, we report a facile, one-step and green approach based on the versatile small biomolecule cysteine both serving as reducing agent and ligand for synthesizing the strongly photoluminencent and water-soluble Au(I)-Ag(I)-cysteine complexes nanoplatelets (Au(I)-Ag(I)-Cys nanoplatelets) for intracellular hypochlorite detection. Multiple spectroscopic and microscopical tools have been used to characterize the resultant Au(I)-Ag(I)-Cys nanoplatelets. It was found that with the cysteine-assisted synthesis approach, the Ag(I) doping to the Au(I) complexes could form the supramolecular organometallic nanoplatelets. Inside, the Au(I)-Ag(I) metallophilic interactions showing an Au to Ag charge transfer property were formed, thereby enhancing the photoluminescence (PL) intensity via the charge transfer from the bioligand's S to the metal-metal center. The quantum yield (QY) was measured to show a maximum 16-fold enhancement (i.e., from 0.85 to 13.8%). Interestingly, in the presence of ClO^-, the metal-thiolate ligand structure of the as-synthesized Au(I)-Ag(I)-Cys nanoplatelets could be oxidatively damaged, causing the PL quenching, thereby producing the effect of biorecognition towards ClO^- anions. The ClO^--induced PL quenching produced two linear regions at ClO^- concentrations of 0.01-5.0 μM and 5.0-1000 μM with a limit of detection (LOD) of 8.0 nM (S/N = 3). The ClO^--induced PL quenching was specific over the other typical reactive oxygen species (ROS) and the potential interfering substances in biological samples. In addition, the Au(I)-Ag(I)-Cys nanoplatelets had good biocompatibility. Thus, they could be further developed as a biosensor for detecting endogenous ClO^- anions in living cells.

Detection of tetanus toxoid with fluorescent tetanus human IgG-AuNC-based immunochromatography test strip

Assays for detecting tetanus toxoid are of great significance to be applied in the research of the safety testing of tetanus vaccine. Currently, guinea pigs or mice are usually used to evaluate the toxicity in these assays. Herein, a facile and quick biomineralization process was carried out to generate tetanus human immunoglobulin G (Tet-IgG)-functionalized Au nanoclusters (Tet-IgG-AuNCs). The obtained Tet-IgG-AuNCs exhibited strong red emission with a photoluminescence quantum yield of 13%. Based on surface plasmon resonance measurements, the apparent dissociation constant of the Tet-IgG-AuNC-tetanus toxoid complexes was measured to be 2.27 × 10^-8 M. A facile detection approach was developed using a fluorescent Tet-IgG-AuNC-based immunochromatography test strip. By utilizing the high-brightness fluorescent Tet-IgG-AuNCs, this immunosensor showed favorable sensitivity with a detection limit at the level of 0.03 μg/mL. Further results demonstrated that this assay can reliably detect tetanus toxoid and therefore might provide a novel method to replace animal tests for the quantification of tetanus toxicity. Moreover, the antibody-AuNC-based immunochromatography test strip platform serves as a promising candidate to develop new approaches for detecting targeted antigens and biological events of interest.

Aggregation-Induced Emission of Au/Ag Alloy Nanoclusters for Fluorescence Detection of Inorganic Pyrophosphate and Pyrophosphatase Activity

The development of sensitive and accurate detection of inorganic pyrophosphate (PPi) and pyrophosphatase activity (PPase) is important as they play vital roles in biological systems. However, it is still not satisfactory for most of the analytical methods for PPi and PPase because of their Cu²⁺-dependence and poor accuracy. Although the metal ion triggered aggregation-induced emission (AIE) of metal nanoclusters (NCs) offers a new approach to design a Cu²⁺-free strategy for the accurate determination of PPi and PPase recently, current methods are all focused on utilizing pure metal NCs. Alloy NCs incorporating the advantages of diverse metal usually can achieve improved behaviors in the application, such as enhanced sensitivity and stability. In this work, glutathione stabilized alloy Au/Ag NCs were synthesized via a simple method and used for the fluorescence detection of PPi and PPase based on a Zn²⁺-regulated AIE strategy. The controlled release of Zn²⁺ by PPi and PPase could regulate the AIE of Au/Ag NCs and be employed to response PPi concentration and PPase activity. This method processes simple procedure, high sensitivity and stability, and low toxicity. In addition, we also studied the AIE behaviors of this Au/Ag NCs and offer some fundamental understanding of the AIE properties of water-soluble alloy NCs. This study not only provides a straightforward and new approach for PPi and PPase determination but a basis for further study on the AIE properties of alloy NCs and their application.

Single-strand DNA-scaffolded copper nanoclusters for the determination of inorganic pyrophosphatase activity and screening of its inhibitor

A fluorescence method for the determination of inorganic pyrophosphatase (PPase) activity has been established based on copper nanoclusters (CuNCs). The polythymine of 40 mer (T40) acts as a template for the reduction reaction from Cu²⁺ to Cu⁰ by ascorbic acid (AA). This reaction leads to the formation of fluorescent CuNCs with excitation/emission peaks at 340/640 nm. However, the higher binding affinity between inorganic pyrophosphate (PPi) and Cu²⁺ hinders the effective formation of CuNCs. This shows low fluorescence intensity. PPase catalyzes the hydrolysis of PPi into Pi during which free Cu²⁺ ions are produced. This facilitates the formation of fluorescent CuNCs. Thus, the fluorescence intensity was restored. The fluorescence enhancement of the system has a linear relationship with PPase activity in the range 0.3 to 20 mU·mL^-1, and the detection limit is0.2 mU·mL^-1. The relative intensity (I/I₀) at 640 nm for the analytical solution versus system is also employed to screen the inhibitor for PPase with high efficiency. Graphical abstract Schematic representation of a fluorescent assay for the determination of inorganic pyrophosphatase activity and screening its inhibitor based on single-strand polythymine-scaffolded copper nanoclusters.

Advances in biomedical and pharmaceutical applications of protein-stabilized gold nanoclusters

The interest in using gold nanoclusters (AuNCs) as imaging probes is growing, covering wide ranges of applications. The stabilization of AuNCs with protein ligands enhances their biomedical and pharmaceutical applications. This is due to the biocompatibility, water solubility and bioactivity of proteins. Different factors can control the optical properties of AuNCs such as protein size, amino acids content and conformational structure. Controlling the synthesis conditions can result in tuning the AuNCs excitation, emission, fluorescence intensity and physicochemical properties to fulfill different applications. NIR-emitting protein-stabilized AuNCs are promising as imaging agents for targeting and visualization of cancer in vitro and in vivo. They are promising to be included as an important part of multifunctional theranostic nanosystems, due to their potential dual functions as imaging and photosensitizing agent for photodynamic therapy. Additionally, the protein around AuNCs represents a rich environment of active functional groups that are susceptible for conjugation with various biomolecules. Protein-AuNCs can act as fluorescent probes for rapid and selective analysis of different analytes in solution, cells or biological fluids. In conclusion, the variability of protein-AuNC applications can advance research in different biomedical and pharmaceutical fields.

Monitoring inorganic pyrophosphatase activity with the fluorescent dizinc(ii) complex of a macrocycle bearing one dansylamidoethyl antenna

The dizinc(ii) complexes of L were used for the recognition of anions by fluorescence spectroscopy (L is a heteroditopic hexaazamacrocycle with two diethylenetriamine coordination heads with 2-methylpyridyl and dansylamido ethyl arms, and m-xylyl spacers). The protonation of L and stability constants of its zinc(ii) complexes were determined in aqueous solution, at 298.2 ± 0.1 K and I = 0.10 ± 0.01 M in KNO₃. At a 2 : 1 Zn²⁺/L ratio, the dinuclear complexes clearly dominate. The ligand alone does not display fluorescence changes upon increasing the pH value, but in the presence of Zn²⁺ the emission reaches a maximum at pH ≅ 7.5, at which 95% of the ligand is in the dinuclear complex form. The emission appears concomitantly with the [Zn₂H_-1L]³⁺ species formation, which supports that the latter complex corresponds to the metal-promoted deprotonation of dansylamide NH. The [Zn₂H_-1L]³⁺ complexes were used for the recognition of phosphate and polyphosphate anions in aqueous solution buffered at pH 7.5 with 2 mM PIPPS, at 298.2 K. The binding of anions causes a decrease of the emission. The association constant determination revealed that HPPi^3- is the strongest bound anion (log K_app = 5.57), followed by HATP^3- (two times weaker), and the remaining anions show lower binding constants, with HPO₄^2- having the weakest uptake by the receptor. The observed selectivity of the [Zn₂H_-1L]³⁺ receptor for PPi in relation to HPO₄^2-, and the fact that the formation of the [Zn₂H_-1L]³⁺ complex is not disturbed by the presence of Mg²⁺, allowed monitoring of the PPi hydrolysis by using inorganic pyrophosphatase in real-time.

Gold nanoclusters/graphene quantum dots complex-based dual-emitting ratiometric fluorescence probe for the determination of glucose

Herein, we report the design of a single-excitation/double-emission ratiometric fluorescence nanosensor for the determination of glucose. The sensing system combines glucose oxidation catalyzed by glucose oxidase, Fenton chemistry, Fe³⁺-sensitive fluorescent gold nanoclusters (AuNCs), and Fe³⁺-inert fluorescent graphene quantum dots (GQDs). We used orange-fluorescent AuNCs co-modified with bovine serum albumin and 3-mercaptopropionic acid as the indicator probe, and GQDs with the same excitation wavelength as the BSA/MPA-AuNCs, but with different emission wavelength, as the reference probe. The fluorescence intensity-ratio between 420 nm and 575 nm (F₄₂₀/F₅₇₅) was used to quantitatively determine glucose with a low detection limit of 0.18 μM, and the nanosensor was successfully used to detect glucose in human serum. This ratiometric fluorescence sensing system, based on AuNCs and GQDs, ensures sensitive and convenient determination of glucose, and has broad application prospects for biomedical-analysis applications.

Fluorescent gold nanocluster-based sensor for detection of alkaline phosphatase in human osteosarcoma cells

Gold nanoclusters (AuNCs) have attracted much attention as signal transducers in photoluminescence chemical/biological sensors. Herein, we employ bovine serum albumin/3-mercaptopropionic acid co-modified AuNCs as a fluorescence probe, Fe³⁺ as a quencher, and pyrophosphate as an alkaline phosphatase (ALP) substrate and Fe³⁺ chelator to design a novel biosensor for ALP detection, achieving a detection linear range of 0.8-16 U/L and a detection limit of 0.78 U/L. The developed method is successfully applied to the detection of ALP in human osteosarcoma cells and is shown to be suited for ALP inhibitor screening.

Peptide-capped functionalized Ag/Au bimetal nanoclusters with enhanced red fluorescence for lysosome-targeted imaging of hypochlorite in living cells

Bioimaging probes for monitoring intracellular reactive oxygen species have important implications for cell biology research. Herein, we developed peptide-capped silver/gold nanoclusters (peptide@Ag/Au NCs) for lysosome-targeted imaging of hypochlorite (ClO^-). The peptide@Ag/Au NCs were synthesized via a one-pot method using peptide as both a template and a reducing agent. The fluorescence intensity and absolute quantum yield of peptide@Ag/Au NCs were much higher than those of peptide-capped gold nanoclusters and silver nanoclusters. In the presence of ClO^-, the fluorescence of peptide@Ag/Au NCs was quenched, accompanied by a redshift due to ClO^--induced oxidation of the peptide ligand and decreased Ag content in Ag/Au NCs. The relative fluorescence intensity F₀/F had favourable linearity for ClO^- concentrations in the range 0.1-100 μmol/L (R² = 0.9954), with a detection limit (LOD) of 80 nmol/L. The lysosome-targeted peptide@Ag/Au NCs were applied to detect ClO^- in lysosomes in living cells via fluorescence imaging.

6-Aza-2-Thio-Thymine Stabilized Gold Nanoclusters as Photoluminescent Probe for Protein Detection

This study puts forward an efficient method for protein detection in virtue of the tremendous fluorescence enhancement property of 6-aza-2-thio-thymine protected gold nanoclusters (ATT-AuNCs). In-depth studies of the protein-induced photoluminescence enhancement mechanism illustrate the mechanism of the interaction between ATT-AuNCs and protein. This new-established probe enables feasible and sensitive quantification of the concentrations of total protein in real samples, such as human serum, human plasma, milk, and cell extracts. The results of this proposed method are in good agreement with those determined by the classical bicinchoninic acid method (BCA method).

Versatile enzymatic assays by switching on the fluorescence of gold nanoclusters

Herein we present a general and turn-on strategy for enzymatic bioassays on the basis of redox state dependent emission of gold nanoclusters (AuNCs). The photoluminescence of AuNCs was quenched obviously by the oxidative ferricyanide while unaffected by its corresponding reduced state, i.e., ferrocyanide. The distinctive quenching abilities for AuNCs by the redox couple (ferricyanide/ferrocyanide) enabled their utility as new fluorescent sensing platforms to detect redox-related phenomena. The proposed protocols were conducted by using the model oxidoreductases of glucose oxidase (GOx) and the enzyme cascade of lactate dehydrogenase (LDH)/diaphorase to catalytically convert ferricyanide to ferrocyanide, which switched on fluorescence of the detection systems. The detection limit for glucose and lactate was found to be as low as 0.12 and 0.09 μM, respectively. This work features the first use of the redox couple of ferricyanide/ferrocyanide in fluorescent bioanalysis, which enables versatile, signal on and highly sensitive/selective detections as compared to the state of the art fluorescently enzymatic sensing platforms. Importantly, considering the significance of ferricyanide/ferrocyanide involves in numerous other oxidoreductases mediated biocatalysis, this protocol has wide versatility that enables combination with oxidoreductases related reactions for biosensing.

Cu(II)-Regulated On-Site Assembly of Highly Chemiluminescent Multifunctionalized Carbon Nanotubes for Inorganic Pyrophosphatase Activity Determination

A novel signal-on chemiluminescence (CL) assay for pyrophosphatase (PPase) activity determination was innovatively developed based on the Cu(II)-regulated on-site assembly of highly chemiluminescent Cu(II), N-(aminobutyl)-N-(ethylisoluminol) (ABEI), gold nanodot, and chitosan multifunctionalized carbon nanotubes (Cu(II)/ABEI-Au/cs-CNTs). First, ABEI-functionalized gold nanodots (ABEI-Au) were assembled on the surface of chitosan-modified carbon nanotubes (cs-CNTs) via the reduction of HAuCl₄ with ABEI in a cs-CNT suspension to form ABEI-Au/cs-CNTs. Then, it was found that the catalyst Cu(II) can be selectively, efficiently, and quickly adsorbed onto ABEI-Au/cs-CNTs via the high-affinity interactions between Cu(II) and cs-CNTs to form novel hybrid nanomaterials Cu(II)/ABEI-Au/cs-CNTs. The CL intensity of Cu(II)/ABEI-Au/cs-CNTs was enhanced by about 2 orders of magnitude compared with that of ABEI-Au/cs-CNTs. Furthermore, it was found that in the presence of pyrophosphate ions (PPi), PPi could coordinate with Cu(II) to form a stable PPi-Cu(II) complex and block the assembly of Cu(II)/ABEI-Au/cs-CNTs. After the addition of PPase, PPase could catalyze the hydrolysis of PPi into Pi and release Cu(II) from the PPi-Cu(II) complex. The released free Cu(II) could trigger the on-site assembly of highly chemiluminescent Cu(II)/ABEI-Au/cs-CNTs, resulting in an enhanced CL intensity. The enhanced CL intensity had a good linear relationship with the activity units of PPase ranging from 0.025 to 0.5 U, with a detection limit of 9 mU. The method was employed to monitor the PPase inhibitor efficiently. Cu(II)/ABEI-Au/cs-CNTs with excellent CL may also find more applications in the development of novel CL analytical methods.

Rational Design of High-Performance Donor-Linker-Acceptor Hybrids Using a Schiff Base for Enabling Photoinduced Electron Transfer

Donor-linker-acceptor (D-L-A)-based photoinduced electron transfer (PET) has been frequently used for the construction of versatile fluorescent chemo/biosensors. However, sophisticated and tedious processes are generally required for the synthesis of these probes, which leads to poor design flexibility. In this work, by exploiting a Schiff base as a linker unit, a covalently bound D-L-A system was established and subsequently utilized for the development of a PET sensor. Cysteamine (Cys) and N-acetyl-l-cysteine (NAC) costabilized gold nanoclusters (Cys/NAC-AuNCs) were synthesized and adopted as an electron acceptor, and pyridoxal phosphate (PLP) was selected as an electron donor. PLP can form a Schiff base (an aldimine) with the primary amino group of Cys/NAC-AuNC through its aldehyde group and thereby suppresses the fluorescence of Cys/NAC-AuNC. The Rehm-Weller formula results and a HOMO-LUMO orbital study revealed that a reductive PET mechanism is responsible for the observed fluorescence quenching. Since the pyridoxal (PL) produced by the acid phosphatase (ACP)-catalyzed cleavage of PLP has a weak interaction with Cys/NAC-AuNC, a novel turn-on fluorescent method for selective detection of ACP was successfully realized. To the best of our knowledge, this is the first example of the development of a covalently bound D-L-A system for fluorescent PET sensing of enzyme activity based on AuNC nanoprobes using a Schiff base.

A novel gold nanocluster-based fluorometric biosensor for measuring prooxidant activity with a large Stokes shift

A chicken egg white protein-protected gold nanocluster (CEW-AuNC) based fluorogenic biosensor, where protein was used as both reducing and protecting agent, was developed to determine the Cu(II)-induced prooxidant activity of natural antioxidants abundant in food and biological samples. Gold nanoclusters, prepared using egg white proteins, exhibited strong fluorescence. The prooxidant activity of the tested antioxidants was indirectly measured by their reducing action on Cu(II) to Cu(I), and the reduced cuprous ion was bound to the thiol groups in the CEW-AuNC structure, causing a decrease in fluorescence intensity. Epicatechin, catechin, epigallocatechin gallate, morin, rutin, quercetin, gallic, chlorogenic, and rosmarinic acids, glutathione, cysteine, N-acetyl cysteine, bilirubin, resveratrol, and α-tocopherol were studied as natural antioxidants. A fluorometric method showing a large Stokes shift with excitation/emission maxima at 360∕640 nm was developed to sensitively measure the decrease in the fluorescence of CEW-AuNC associated with the binding of copper(I) to the protein structure. Total prooxidant activities of the binary, ternary, and quaternary synthetic mixtures and of some food and synthetic serum samples were determined. The biosensor response was statistically compared to that of its spectrophotometric counterpart. This method can be used for the control of the oxidative stability of foods with a prolonged shelf life.

Immunoglobulin G-Encapsulated Gold Nanoclusters as Fluorescent Tags for Dot-Blot Immunoassays

Few-atom gold nanoclusters (AuNCs) have been fabricated and used for various fields owing to their remarkable optical and photophysical features. However, the rational design for the antibody-mediated synthesis of fluorescent AuNCs for direct antigen-antibody reactions remains unexplored. In this work, immunoglobulin G (IgG)-functionalized AuNCs (IgG-AuNCs) were successfully prepared via a facile and fast biomineralization process. The generated IgG-AuNCs can emit intense red fluorescence with a high photoluminescence quantum yield. Besides strong emission, the bioactivity of IgG on the IgG-AuNCs can be retained. Surface plasmon resonance measurements suggested that IgG-AuNCs can bind to goat anti-human IgG with an affinity constant of 6.21 × 10^-8 M. A simple detection method was then developed using a dot-blot immunoassay with IgG-AuNCs as fluorescent tags. Experimental results confirmed that the IgG-AuNC-based fluorescent reporters had many advantages such as low nonspecific adsorption and good photostability, offering immense potential for the development of efficient biosensors. This work can be extended to other specific antibodies to produce multifunctional AuNCs and utilized to detect and monitor targeted analytes and biological events of interest.

A Gold Nanocage/Cluster Hybrid Structure for Whole-Body Multispectral Optoacoustic Tomography Imaging, EGFR Inhibitor Delivery, and Photothermal Therapy

Gold nanocages (AuNCs) and gold nanoclusters (AuClusters) are two classes of advantageous nanostructures with special optical properties, and many other attractive properties. Integrating them into one nanosystem may achieve greater and smarter performance. Herein, a hybrid gold nanostructure for fluorescent and optoacoustic tomography imaging, controlled release of drugs, and photothermal therapy (PTT) is demonstrated. For this nanodrug (EA-AB), an epidermal growth factor receptor (EGFR) inhibitor erlotinib (EB) is loaded into AuNCs, which are then capped and functionalized by biocompatible AuCluster@BSA (BSA = bovine serum albumin) conjugates via electrostatic interaction. Upon cell internalization, the lysosomal proteases and low pH cause the release of EB from EA-AB, and also induce fluorescence restoration of the AuCluster for imaging. Irradiation with near-infrared light further promotes the drug release and affords a PTT effect as well. The AuNC-based nanodrug is optoacoustically active, and its biodistribution and metabolic process have been successfully monitored by whole-body and 3D multispectral optoacoustic tomography imaging. Owing to the combined actions of PTT and EGFR pathway blockage, EA-AB exhibits marked tumor inhibition efficacy in vivo.

Self-Referenced Ratiometric Detection of Sulfatase Activity with Dual-Emissive Urease-Encapsulated Gold Nanoclusters

In this study, on the basis of the biomineralization capability of urease, a facile, one-step, and green synthetic method has been proposed for the fabrication of gold nanoclusters (AuNCs). The prepared urease-encapsulated AuNCs (U-AuNCs) exhibited strong red fluorescence emission (λ_em = 630 nm) with a quantum yield as high as 17%. Interestingly, at a low concentration, the U-AuNC solution was found to be a dual-emissive system with the blue emission of the dityrosine (diTyr) residues of urease and the red emission of the embedded AuNCs. Further experiments demonstrated that p-nitrophenol (PNP) can selectively suppress the 410 nm emission of the diTyr residues of U-AuNCs without affecting the red emission of the U-AuNCs. The fluorescence quenching mechanism between U-AuNCs and PNP was systematically studied, and the leading role of the inner filter effect (IFE) was identified. Additionally, based on the sulfatase-catalyzed hydrolysis of p-nitrophenyl sulfate (PNPS) to release PNP, a self-referenced ratiometric detection method for sulfatase, which plays a crucial role in sulfur cycling, degradation of sulfated glycosaminoglycans and glycolipids, and extracellular remodeling of sulfated glycosaminoglycans, was developed by using dual-emissive U-AuNCs as the signal readout, in which the diTyr residues served as the probe and the AuNCs functioned as the internal reference. This IFE-based ratiometric sensing strategy showed a good linear relationship over the range of 0.01-1 U/mL ( R² = 0.997). The detection limit for sulfatase activity was 0.01 U/mL. The developed protocol was successfully used to detect sulfatase activity in human serum samples. The simplicity, rapidity, low cost, high credibility, good reproducibility, and excellent selectivity of the detection platform serve as an inspiration for further applications of fluorescent AuNCs in chemo/biosensing.

Fabrication of cefotaxime sodium-functionalized gold nanoclusters for the detection of copper ions in Chinese herbal medicines

Antibiotic-based gold nanoclusters (AuNCs) are a good sensing platform for specific recognition; however, the related studies are few. Herein, a simple and facile strategy was proposed for the fabrication of bright blue fluorescent AuNCs through the degradation product (DCTX) of cefotaxime sodium that induced the reduction of HAuCl₄. Various analytical techniques were applied to characterize the prepared AuNCs@DCTX. AuNCs@DCTX exhibited a strong emission peak centered at 420 nm and a quantum yield of 11.8%. Furthermore, an aggregation-induced fluorescence quenching mode endowed the AuNCs@DCTX probe with good specificity and sensitivity for Cu²⁺ detection. The proposed probe had a linear range of 0.01–40 μM, a precision with a relative standard deviation of 1.2% (n = 8), and a detection limit of 8 nM (signal/noise = 3). Interestingly, the probe could be reused through switching the “off” and “on” states by the addition of Cu²⁺ and EDTA. The practicality of the sensing platform was investigated for the determination of Cu²⁺ in four Chinese herbal medicines (CHMs), and the results were in accordance with those obtained by the FAAS method. This study has provided an alternate way for the fabrication of thiolate-protected AuNCs for sensing applications.

Antibiotic-based gold nanoclusters (AuNCs) are a good sensing platform for specific recognition; however, the related studies are few.

Strong red-emitting gold nanoclusters protected by glutathione S-transferase

Glutathione S-transferase (GST) is distributed widely in tissues and has been proven to be vital in the body. For example, it catalyzes reduced glutathione (GSH) to a variety of electrophilic substances and thus protects cells against many toxic chemicals. Therefore, GST-related investigations have always been significant for medical and/or life sciences. In the present study, a new material of gold nanoclusters (Au-NCs) protected by GST, Au-NCs@GST, was fabricated via an improved one-step heating method. The products were fully characterized by X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), matrix-assisted laser desorption/ionization time of flight mass spectrometry (MALDI-TOF MS), and Fourier transform infrared (FT-IR) and circular dichroism (CD) spectra. The results confirmed that around 10 gold atoms are encapsulated in one intact GST, forming Au-NCs@GST with strong (QY = 13.5%) red emission at 670 nm. Therefore, a new nanomaterial possessing both strong luminescence and bio-functions of GST was developed, and it has great potential in GST-related investigations. To prove the concept, Au-NCs@GST was successfully applied to detect metronidazole (MNZ) both in solution and in living cells. Therefore, in the present study, we report not only a new nanomaterial of Au-NCs@GST but also a feasible fluorescence probe for antibiotic detection. Both the improved synthetic method and the design concept can be extended to the fabrication of other kinds of metal nanoclusters using different functional proteins for various purposes.

A fluorometric sensing method for sensitive detection of trypsin and its inhibitor based on gold nanoclusters and gold nanoparticles

In this work, a facile, label-free, and sensitive fluorometric strategy for detection of trypsin and its inhibitor was established on the basis of the fluorescence resonance energy transfer (FRET) between mercaptoundecanoic acid functionalized gold nanoclusters (AuNCs) and gold nanoparticles (AuNPs) via protamine as a bridge. Protamine can trigger the aggregation of AuNPs and link AuNCs with aggregated AuNPs through electrostatic interaction. Compared with monodisperse AuNPs, the UV-vis absorption band of aggregated AuNPs overlapped considerably with the emission spectrum of AuNCs. Thus, the fluorescence of AuNCs was obviously quenched by the aggregated AuNPs through FRET. In the presence of trypsin, protamine was hydrolyzed into small fragments, leading to the deaggregation of AuNPs and breaking of the short distance between AuNPs and AuNCs, so the FRET process was inhibited, and the fluorescence of AuNCs was recovered. The increase in the fluorescence intensity of AuNCs was directly related to the amount of trypsin. Hence trypsin can be determined on the basis of the variation of fluorescence intensity, with a linear range of 5-5000 ng mL-1 and a detection limit of 1.9 ng mL-1. In addition, this system was used for the detection of trypsin inhibitor by application of the inhibitor isolated from soybean as a model. The sensing method was applied for trypsin detection in human urine and commercial multienzyme tablet samples with satisfactory results. Graphical abstract ᅟ.

A ratiometric fluorometric and colorimetric probe for the β-thalassemia drug deferiprone based on the use of gold nanoclusters and carbon dots

A turn-on fluorometric probe is described for the β-thalassemia drug deferiprone (DFP). The probe is making use of carbon dots (C-dots) and gold nanoclusters (AuNCs) which, under 340-nm excitation, display dual emission with peaks at 445 and 592 nm. The orange fluorescence of AuNCs is quenched after the addition of Fe(III), but recovered on addition of DFP. The blue fluorescence of the C-dots, in contrast, remains unchanged. The Fe(III)-DFP complex undergoes intermolecular electron transfer under UV excitation and displays only weak peaks in the UV region. The ratio of the two fluorescences is measured which makes the probe intrinsically self-calibrated. Colorimetry is best performed at a wavelength of 280 nm. The ratio of fluorescences increases linearly in the 0.1-80 μM DFP concentration range, and the detection limit is 0.1 μM. The respective figures for colorimetry are 2.5-120 μM and 0.3 μM. The probe is highly selective for DFP. Thus, it possesses a large potential for detection of DFP in serum. Graphical abstract The orange fluorescence of gold nanoclusters (AuNCs) is quenched by Fe³⁺ ions but recovered on addition of deferiprone (DFP), while the change of blue fluorescence in carbon dots (C-dots) is minimal. Moreover, the Fe(III)-DFP complex undergoes intermolecular electron transfer under ultraviolet (UV) irradiation, and absorption spectra can be observed in the presence of Fe(III)-DFP detected by UV scanning. Thus, a ratiometric fluorometric and colorimetric assay is developed for DFP.

Gold Nanoparticle-Based Photoluminescent Nanoswitch Controlled by Host-Guest Recognition and Enzymatic Hydrolysis for Arginase Activity Assay

The development of simple yet powerful methods for monitoring enzyme activity is of great significance. Herein, a facile, convenient, cost-effective, and continuous fluorescent method for the detection of arginase and its inhibitor has been reported based on a host-guest interaction-controlled and enzymatic hydrolysis-controlled luminescent nanoswitch. The fluorescence intensity of 6-aza-2-thiothymine-stabilized gold nanoparticle (ATT-AuNP) is enhanced by l-arginine, owing to the formation of a supramolecular host-guest assembly between the guanidine group of l-arginine and ATT molecules capped on the AuNP surface. However, hydrolysis of l-arginine, catalyzed by arginase, leads to a decrease in the fluorescence intensity of l-arginine/ATT-AuNPs hybrids. Upon incorporation of the arginase inhibitor l-norvaline, the fluorescence of the ATT-AuNP-based detecting system is restored. The linear range of arginase activity determination is from 0.0625 to 1.15 U/mL and the limit of detection is 0.056 U/mL. The half-maximal inhibition value IC₅₀ of l-norvaline is determined to be 5.6 mM. The practicability of this luminescent nanoswitch is validated by assaying the arginase activity in rat liver and monitoring the response of rat liver arginase to pharmacological agent. Compared to the existing fluorescent method of arginase activity assay, the approach demonstrated here does not involve any complicated technical manipulation, thereby greatly simplifying the detection steps. We propose that this AuNP-based luminescent nanoswitch would find wide applications in the field of life sciences and medicine.

Metallic Nanoclusters for Cancer Imaging and Therapy

BACKGROUND

Nanoclusters are made of a few to tens of atoms with a size below 2 nm. Compared with nanoparticles, they exhibited excellent properties, such as tunable fluorescence, ease of conjugation, high quantum yield and biocompatibility, which are highly desired in the development of cancer nanotheranostics. Hence, the metallic nanoclusters have emerged as a newcomer in cancer nanomedicines. This review aims to summarize recently developed approaches to preparing metallic nanoclusters, highlight their applications in cancer theranostics, and provide a brief outlook for the future developments of nanoclusters in nanomedicine.

METHOD

We carried out a thorough literature search using online databases. The search was focused on a centered question. Irrelevant articles were excluded after further examination and directly relevant articles were included. The relevant articles were classified by the subjects and the information from these articles was synthesized.

RESULTS

One hundred and forty-three articles were included in this review. About eighty articles outlined the development in the synthetic methods of nanoclusters. The synthesis approaches include chemical reduction, photoreduction and so on. The progress in the application of gold and silver nanoclusters to cancer theranostics was described in fifteen and eight articles, respectively. The rest articles were about the advancements in the use of other metal nanoclusters and nanocluster nanocomposites as cancer theranostic agents.

CONCLUSION

This review summarizes the synthesis and use of metallic nanoclusters or their nanocomposites as cancer theranostic agents. It confirms their importance, advantages and potentials in serving as a new generation of cancer theranostics in clinics.

Interaction of manganese nanoparticle with cytochrome c: A multi-spectroscopic study

In this paper, the conformational changes of cytochrome c (cyt c) upon interaction with manganese nanoparticle (Mn-NP) were examined using dynamic light scattering (DLS), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), zeta potential, fluorescence spectroscopy, and circular dichroism (CD) spectroscopy methods. DLS and TEM analysis exhibited the structure of Mn-NP was less than 50nm. FTIR bands were similar to those reported for Mn-NP. Zeta potential measurements showed positive charge distribution for Mn-NP (4.71±0.71mV) at pH 7.8. It was revealed that the mechanism of fluorescence quenching incorporated both dynamic and static quenching. Also, binding site and binding constant increased as the temperature is raised. The positive sign of ΔH° and ΔS° suggested that hydrophobic forces are indicative forces in the interaction between cyt c and Mn-NP. Synchronous fluorescence spectra revealed that the conformation of protein was not perturbed around tryptophan (Trp) and tyrosine (Tyr) residues. CD analysis suggested that there was a conformational change at tertiary structure levels of cyt c in the vicinity of phenylalanine (Phe) residues, while the secondary structure of protein was not altered. This study facilitates a deeper insight on the interaction mechanisms between NPs and biological macromolecules.

Nucleotide-directed syntheses of gold nanohybrid systems with structure-dependent optical features: Selective fluorescence sensing of Fe3+ ions

This study demonstrates a one-step synthesis for the preparation of both adenosine monophosphate (AMP)-stabilized colloidal gold nanoparticles (AMP-Au NPs) and fluorescent gold nanoclusters (AMP-Au NCs). The dominant role of AMP:AuCl₄^- molar ratios in the formation of diverse nanosized Au products was proved. The size, the structure and the unique structure-dependent optical properties of the NPs and NCs were determined based on the results of numerous spectroscopic (UV-vis, fluorescence, infrared, x-ray photoelectron), high resolution electron microscopy (HRTEM) and dynamic light scattering (DLS) techniques. Stabile AMP-Au NPs with diameter of ca. 11nm and ultra-small AMP-Au NCs having blue fluorescence (λ_em=480nm) were identified. In addition, the AMP-Au NCs have been utilized to develop a selective sensor for the detection of Fe³⁺ ions in aqueous medium based on fluorescence quenching. Several essential metal ions and anions have been tested but our results clearly supported that dominant quenching was observed only for Fe³⁺ ions. Based on the determined limit of detection (LOD=2.0μM) our system is capable of detecting Fe³⁺ ions in drinking water. The Stern-Volmer constants (K_SV) and various thermodynamic parameters (ΔG, ΔH°, ΔS°, ΔC_p) of the quenching process have also been determined by the Stern-Volmer fitting of the fluorescence data in order to better understand the quenching mechanism.

Red-emitting p53-protected gold nanoclusters and their screening of anti-tumor agents from Chinese medicine

The synthesis route of red-emitting p53–AuNCs is straightforward and the products can be used to test for the anti-tumor agent myricetin.

Direct self-focusing synthesis of monodisperse [Au8(PPh3)7]2+ nanoclusters

Direct synthesis of atomically monodisperse Au₈ nanoclusters via the self-focusing process during NaBH₄ reduction of Au(PPh₃)₂Cl.

A novel dual-functional biosensor for fluorometric detection of inorganic pyrophosphate and pyrophosphatase activity based on globulin stabilized gold nanoclusters

A novel ultrasensitive dual-functional biosensor for highly sensitive detection of inorganic pyrophosphate (PPi) and pyrophosphatase (PPase) activity was developed based on the fluorescent variation of globulin protected gold nanoclusters (Glo@Au NCs) with the assistance of Cu²⁺. Glo@Au NCs and PPi were used as the fluorescent indicator and substrate for PPase activity evaluation, respectively. In the presence of Cu²⁺, the fluorescence of the Glo@Au NCs will be quenched owing to the formation of Cu²⁺-Glo@Au NCs complex, while PPi can restore the fluorescence of the Cu²⁺-Glo@Au NCs complex because of its higher binding affinity with Cu²⁺. As PPase can catalyze the hydrolysis of PPi, it will lead to the release of Cu²⁺ and re-quench the fluorescence of the Glo@Au NCs. Based on this mechanism, quantitative evaluation of the PPi and PPase activity can be achieved ranging from 0.05 μM to 218.125 μM for PPi and from 0.1 to 8 mU for PPase, with detection limits of 0.02 μM and 0.04 mU, respectively, which is much lower than that of other PPi and PPase assay methods. More importantly, this ultrasensitive dual-functional biosensor can also be successfully applied to evaluate the PPase activity in human serum, showing great promise for practical diagnostic applications.

Construction of a Turn Off-On-Off Fluorescent System Based on Competitive Coordination of Cu2+ between 6,7-Dihydroxycoumarin and Pyrophosphate Ion for Sensitive Assay of Pyrophosphatase Activity

The detection of pyrophosphatase (PPase) activity is of great significance in diagnosing diseases and understanding the function of PPase-related biological events. This study constructed a turn off-on-off fluorescent system for PPase activity assay based on PPase-regulated competitive coordination of Cu²⁺ between a water-soluble fluorescent probe 6,7-dihydroxycoumarin (DHC) and pyrophosphate (PPi). The probe DHC can coordinate with Cu²⁺ and consequently display on-off type fluorescence response. Furthermore, the in situ formed nonfluorescent Cu²⁺-DHC complex can act as an effective off-on type fluorescent probe for sensing PPi due to the higher coordination reactivity between Cu²⁺ and PPi than that between Cu²⁺ and DHC. The subsequent addition of PPase to the mixture containing Cu²⁺, DHC, and PPi leads to the fluorescence requenching of the system again (an off state) because PPase catalyzes the hydrolysis of PPi into orthophosphate in the reaction system. Under the optimum conditions, the decrease of the fluorescence intensity of DHC-Cu²⁺-PPi system was linear with the increase of the PPase activity in the range from 0.1 to 0.3 U. The detection limit was down to 0.028 U PPase (S/N = 3). Moreover, the as-established system was also applied to evaluate PPase inhibitor. This study offers a simple yet effective method for the detection of PPase activity.