A green and facile approach for synthesizing imine to develop optical biosensor for wide range detection of bilirubin in human biofluids

Label-Free Detection of Unbound Bilirubin and Nitrophenol Explosives in Water by a Mechanosynthesized Dual Functional Zinc Complex: Recognition of Picric Acid in Various Common Organic Media

High levels of unconjugated bilirubin (UB) in serum lead to asymptomatic and neonatal jaundice and brain dysfunctions. Herein, we have reported the detection of UB at as low as 1 μM in an aqueous alkaline medium using a Zn(II) complex. The specificity of the complex has been validated by the HPLC in the concentration window 6-90 μM, which is rare. The sensory response of the probe at physiological pH against nitro explosives developed it as an instant-acting fluorosensor for picric acid (PA) and 2,4-dinitrophenol (2,4-DNP). Spectroscopic titration provided a binding constant of 4×105  M-1 with PA. The naked eye detection was found to be 15 μM. The solid-state photoluminescent nature of the complex enabled it for PA sensing in the solid phase. Interestingly, the probe remained fluorescent in various volatile and non-volatile organic solvents. As a result, it can also detect PA and 2,4-DNP in a wide range of common organic media. NMR studies revealed the coordination of PA, 2,4-DNP, and UB to the Zn(II) center of the probe, which is responsible for the observed quenching of the probe with the analytes.

Polymeric copper(ii) and dimeric oxovanadium(v) complexes of amide-imine conjugate: bilirubin recognition and green catalysis

An exceptionally simple amide-imine conjugate, (E)-N'-(4-(diethylamino)-2-hydroxybenzylidene)-4-methylbenzohydrazide (L), derived by the condensation of 4-methyl-benzoic acid hydrazide (PTA) with 4-(diethylamino)-2-hydroxybenzaldehyde was utilized to prepare a dimeric oxo-vanadium (V1) and a one-dimensional (1D) copper(ii) coordination polymer (C1). The structures of L, V1 and C1 were confirmed by single crystal X-ray diffraction analysis. The experimental results indicate that V1 is a promising green catalyst for the oxidation of sulfide, whereas C1 has potential for a C-S cross-coupling reaction in a greener way. Most importantly, C1 is an efficient 'turn-on' fluorescence sensor for bilirubin that functions via a ligand displacement approach. The displacement equilibrium constant is 7.78 × 105 M-1. The detection limit for bilirubin is 1.15 nM in aqueous chloroform (chloroform/water, 1/4, v/v, PBS buffer, and pH 8.0).

Nanomaterials for fluorescent assay of bilirubin

The accumulation of bilirubin in blood is associated with many diseases. Sensitive and accurate detection of bilirubin is of great significance for personal health care. The rapid development of fluorescent nanomaterials promotes rapid development in the bilirubin assay. In this review, traditional methods for detection of bilirubin are briefly presented to compare with fluorescent nanosensors. Subsequently, the recent progress of different types of fluorescent nanomaterials for determination of bilirubin is summarized. Further, the performance of fluorescent nanosensors and conventional techniques for sensing bilirubin are compared. To this end, the challenges and prospects concerning the topics are discussed. This review will provide some introductory knowledge for researchers to understand the status and importance of fluorescent nanosensors for sensing bilirubin.

Fluorimetric chemodosimeter for the detection of capsaicinoids in food matrices

Capsaicin is a major pungent capsaicinoids in chili pepper and it causes duodenal, liver, stomach and gastric cancer in human. Hence, the detection of capsaicinoids becomes important on health issues concern. Here we are reporting, the first organic molecule based fluorimetric sensor for capsaicin detection using simple fluorophore 4-3-(pyren-2-yl-acryloyl) phenyboronic acid (PAPA), which was synthesized via greener microwave method. The probe has detected the capsaicin selectively in presence of other biomolecules in human biofluids through the intramolecular charge transfer mechanism and supported with DFT studies. The sensor has shown an excellent response towards capsaicin from 2 to 40 µM and the limit of detection of 12.84 nM. Real time analysis was done in various food matrices having capsaicinoids and the results have clearly shown good agreement with our optimized data and it also evinced that the developed sensor can be applied to detect the level of pungency of capsaicinoids.

Noninvasive direct bilirubin detection by spectral analysis of color images using a Mini-LED light source

Urine test paper is a standard, noninvasive detection method for direct bilirubin, but this method can only achieve qualitative analysis and cannot achieve quantitative analysis. This study used Mini-LEDs as the light source, and direct bilirubin was oxidized to biliverdin by an enzymatic method with ferric chloride (FeCl₃) for labeling. Images were captured with a smartphone and evaluated for red (R), green (G), and blue (B) colors to analyze the linear relationship between the spectral change of the test paper image and the direct bilirubin concentration. This method achieved noninvasive detection of bilirubin. The experimental results demonstrated that Mini-LEDs can be used as the light source to analyze the grayscale value of the image RGB. For the direct bilirubin concentration range of 0.1-2 mg/dL, the green channel had the highest coefficient of determination coefficient (R²) of 0.9313 and a limit of detection of 0.56 mg/dL. With this method, direct bilirubin concentrations higher than 1.86 mg/dL can be quantitatively analyzed with the advantage of rapid and noninvasive detection.

Label free optical biosensor for insulin using naturally existing chromene mimic synthesized receptors: A greener approach

We currently reporting a simple and first label free optical insulin biosensor using a novel cum naturally existing Chromene mimic receptors via one pot greener methodology. Among synthesized 4H- Chromene derivatives, 2-amino-5,7-dihydroxy-4-(4-nitrophenyl)-4H-chromene-3-carbonitrile (Compound 1c) is showed a very good colorimetric response for insulin within the linear range of 20 fM -500 pM along with theoretically measured LOD of 15.38 fM based on the increment in absorbance. Meanwhile 2-amino-5, 7-dihydroxy-4-(pyren-2-yl)-4H-chromene-3-carbonitrile (Compound 1a) is depicted an excellent quenching in fluorescence response for insulin with LOD of 7.07 fM and along with wide working range from 10 fM -600 pM. The developed biosensor is tested for the detection of insulin in human blood serum using direct as well as standard addition method and the recovery results are showed a very good agreement with standard clinical chemiluminescent assay method. Hence, this developed biosensor is more reliable for clinical detection of Insulin and so a good analytical method for Diabetes diagnosis within a short period of time.

Expeditious fluorimetric detection of bilirubin by simple imidazole derived luminophore and it's pragmatic applicability in spiked biological fluids

Bilirubin is an indispensable biomarker for liver diseases. Utilizing organic molecules as sensor platform for effective detection of bilirubin are little. In addition, the reported fluorophores required longer incubation time for detection. Hence, herein we have attempted to design an imidazole derivative 4-(3H-imidazo[4,5-b]pyridin-2-yl)-N,N-diphenylaniline (IMI) from triphenylamine and pyridine units which could detect bilirubin swiftly without any incubation period. IMI manifested an instant quenching of emission in presence of bilirubin with limit of detection (LOD) 11.74 × 10^-6 mol L^-1. The mechanistic aspect of detection involves coexistence of both static and dynamic quenching which was suitably justified. Finally, the pragmatic application of IMI was performed in bio-fluids.

2D MXene-Based Biosensing: A Review

MXene emerged as decent 2D material and has been exploited for numerous applications in the last decade. The remunerations of the ideal metallic conductivity, optical absorbance, mechanical stability, higher heterogeneous electron transfer rate, and good redox capability have made MXene a potential candidate for biosensing applications. The hydrophilic nature, biocompatibility, antifouling, and anti-toxicity properties have opened avenues for MXene to perform in vitro and in vivo analysis. In this review, the concept, operating principle, detailed mechanism, and characteristic properties are comprehensively assessed and compiled along with breakthroughs in MXene fabrication and conjugation strategies for the development of unique electrochemical and optical biosensors. Further, the current challenges are summarized and suggested future aspects. This review article is believed to shed some light on the development of MXene for biosensing and will open new opportunities for the future advanced translational application of MXene bioassays.

Highly Sensitive and Selective Detection of Melatonin in Biofluids by Antipyrine Based Fluorophore

A simple fluorescent based organic fluorophore was synthesized and it shows significant fluorescent intensity with melatonin (MLN). Hence, it was applicable to the detection of MLN by colorimetric and fluorimetric techniques at neutral pH. Under optimized experimental condition, the synthesized organic fluorophore detects MLN selectively in the presence of other interfering biomolecules through ICT mechanism. The melatonin sensing mechanism is supported by DFT and ¹H-NMR titration. Based on the findings, this method can be applied to design a simple clinical diagnostic tool for MLN.

Biosensors based detection of novel biomarkers associated with COVID-19: Current progress and future promise

The pandemic situation of COVID-19 has caused global alarm in health care, devastating loss of lives, strangled economy, and paralysis of normal livelihood. The high inter-individual transmission rate created havoc in the global community. Although tremendous efforts are pitching in from across the globe to understand this disease, the clinical features seemed to have a wide range including fever, cough, and fatigue are the prominent features. Congestion, rhinorrhea, sore throat, and diarrhea are other less common features observed. The challenge of this disease lies in the difficulty in maneuvering the clinical course causing severe complications. One of the major causative factors for multi-organ failure in patients with severe COVID-19 complications is systemic vasculitis and cytokine-mediated coagulation disorders. Hence, effective markers trailing the disease severity and disease prognosis are urgently required for prompt medical treatment. In this review article, we have emphasized currently identified inflammatory, hematological, immunological, and biochemical biomarkers of COVID-19. We also discussed currently available biosensors for the detection of COVID-19-associated biomarkers & risk factors and the detection methods as well as their performances. These could be effective tools for rapid and more promising diagnoses in the current pandemic situation. Effective biomarkers and their rapid, scalable, & sensitive detection might be beneficial for the prevention of serious complications and the clinical management of the disease.

Using Blue Mini-LEDs as a Light Source Designed a Miniaturized Optomechanical Device for the Detection of Direct Bilirubin

This study developed a miniaturized optomechanical device (MOD) for the feasibility study of direct bilirubin in urine using high-collimation blue mini-light-emitting diodes (Mini-LEDs) as the light source. The constructed MOD used optical spectroscopy to analyze different concentrations of direct bilirubin using the absorbance spectrum to achieve a noninvasive method for detection. The experimental results showed that between the absorbance and different concentrations of direct bilirubin at the blue Mini-LEDs central wavelength (462 nm) was the optimum fitting wavelength; in the direct bilirubin concentration range from 0.855 to 17.1 μmol/L, the coefficient of determination (R²) was 0.9999, the limit of detection (LOD) of 0.171 μmol/L, and the limit of quantitation (LOQ) of 0.570 μmol/L. Therefore, we propose using blue Mini-LEDs as a light source to design a MOD to replace the invasive blood sampling method with a spectroscopic detection of direct bilirubin concentration corresponding to absorbance.

Recent Advances in Biosensor Technologies for Point-of-Care Urinalysis

Human urine samples are non-invasive, readily available, and contain several components that can provide useful indicators of the health status of patients. Hence, urine is a desirable and important template to aid in the diagnosis of common clinical conditions. Conventional methods such as dipstick tests, urine culture, and urine microscopy are commonly used for urinalysis. Among them, the dipstick test is undoubtedly the most popular owing to its ease of use, low cost, and quick response. Despite these advantages, the dipstick test has limitations in terms of sensitivity, selectivity, reusability, and quantitative evaluation of diseases. Various biosensor technologies give it the potential for being developed into point-of-care (POC) applications by overcoming these limitations of the dipstick test. Here, we present a review of the biosensor technologies available to identify urine-based biomarkers that are typically detected by the dipstick test and discuss the present limitations and challenges that future development for their translation into POC applications for urinalysis.

A Low-Cost Paper-Based Device for the Colorimetric Quantification of Bilirubin in Serum Using Smartphone Technology

Total bilirubin values have been used as a potential marker to pre-screen and diagnose various liver-based diseases such as jaundice, bile obstruction, liver cancer, etc. A device known as KromaHealth Kit, composed of paper and an acrylic backbone, is developed to quantify total bilirubin in human serum using image processing and machine learning technology. The biochemical assays are deposited on absorbent paper pads that act as reaction zones when serum is added. A dedicated smartphone app captures images of the colorimetric changes on the pad and converts them into quantitative values of bilirubin. The range of bilirubin concentration that can be quantified using the device ranges from 0.5 mg/dl to 7.0 mg/dl. The precision, limit of detection, interference analysis, linearity, stability, and comparison with a predicate are studied in this paper in accordance with clinical and laboratory standards institute. The results indicate that the KromaHealth Kit can be used as an inexpensive alternative to conventional bilirubin testing in clinical settings. With its level of precision, ease-of-use, long shelf-life, and short turnaround time, it will prove to be invaluable in limited-resource settings.

Smartphone-based fluorescence detection of bilirubin using yellow emissive carbon dots

Development of highly sensitive and selective fluorescent probes for biomolecule detection has significant implications in clinical diagnosis and bioanalysis. In this study, yellow emissive carbon dots (Y-CDs, λ_ex 430 nm, λ_em 550 nm) are synthesized utilizing a one-pot solvothermal approach with o-phenylenediamine (oPDA) as a precursor. The fluorescence of Y-CDs was quenched with the addition of bilirubin due to the inner filter effect mechanism. The fluorescence intensity of Y-CDs decreases as bilirubin concentration increases and can be completely quenched with approximately 90 μM bilirubin. Over other coexisting interferents (26 interferents), the Y-CD probe exhibited great selectivity for bilirubin. More crucially, a smartphone can capture the visible color intensity change of the Y-CD probe under a 365 nm UV lamp and later with the aid of computer software, RGB (red/green/blue) analysis was performed for the quantification of colors. This provides computer vision-based detection and sensitive bilirubin assay with a linear range of 4.0-225 μM and a limit of detection of 1.37 μM. Furthermore, the proposed fluorescent probe was applied in real samples (newborn serum, serum and urine of adults with hyperbilirubinemia) with satisfactory recoveries (96-102%). Based on the validation findings, solution and computer vision-based methods have the potential to be used as fast detection methods for bilirubin in biological samples at the bedside. For the first time, a fluorescent probe based on yellow emissive CDs and RGB analysis for bilirubin recognition has been reported.

Development of Optical Biosensor for the Detection of Glutamine in Human Biofluids Using Merocyanine Dye

Merocyanine dye based fluorescent organic compound has been synthesized for the detection of glutamine. The probe showed remarkable fluorescent intensity with glutamine through ICT (Intermolecular Charge Transfer Mechanism). Hence, it is tested for the detection of glutamine using colorimetric and fluorimetric techniques in physiological and neutral pH (7.2). Under optimized experimental conditions, the probe detects glutamine selectively among other interfering biomolecules. The probe has showed a LOD (lower limit of detection) of 9.6 × 10^-8 mol/L at the linear range 0-180 µM towards glutamine. The practical application of the probe is successfully tested in human biofluids.

Self-Powered Wearable Biosensor in a Baby Diaper for Monitoring Neonatal Jaundice through a Hydrovoltaic-Biosensing Coupling Effect of ZnO Nanoarray

Neonatal jaundice refers to the abnormality of bilirubin metabolism for newborns, and wearable transcutaneous bilirubin meters for real-time measuring the bilirubin concentration is an insistent demand for the babies' parents and doctors. In this paper, a self-powered wearable biosensor in a baby diaper for real-time monitoring neonatal jaundice has been realized by the hydrovoltaic-biosensing coupling effect of ZnO nanoarray. Without external power supply, the system can work independently, and the hydrovoltaic output can be treated as both the power source and biosensing signal. The working mechanism is that the hydrovoltaic output arises from the urine flowing on ZnO nanoarray and the enzymatic reaction on the surface can influence the output. The sensing information can be transmitted through a wireless transmitter, and thus the parents and doctors can treat the neonatal jaundice of babies in time. This work can potentially promote the development of next generation of biosensors and physiological monitoring system, and expand the scope of self-powered technique and smart healthcare area.

Current and emerging technologies for the timely screening and diagnosis of neonatal jaundice

Neonatal jaundice is one of the most common clinical conditions affecting newborns. For most newborns, jaundice is harmless, however, a proportion of newborns develops severe neonatal jaundice requiring therapeutic interventions, accentuating the need to have reliable and accurate screening tools for timely recognition across different health settings. The gold standard method in diagnosing jaundice involves a blood test and requires specialized hospital-based laboratory instruments. Despite technological advancements in point-of-care laboratory medicine, there is limited accessibility of the specialized devices and sample stability in geographically remote areas. Lack of suitable testing options leads to delays in timely diagnosis and treatment of clinically significant jaundice in developed and developing countries alike. There has been an ever-increasing need for a low-cost, simple to use screening technology to improve timely diagnosis and management of neonatal jaundice. Consequently, several point-of-care (POC) devices have been developed to address this concern. This paper aims to review the literature, focusing on emerging technologies in the screening and diagnosing of neonatal jaundice. We report on the challenges associated with the existing screening tools, followed by an overview of emerging sensors currently in pre-clinical development and the emerging POC devices in clinical trials to advance the screening of neonatal jaundice. The benefits offered by emerging POC devices include their ease of use, low cost, and the accessibility of rapid response test results. However, further clinical trials are required to overcome the current limitations of the emerging POC's before their implementation in clinical settings. Hence, the need for a simple to use, low-cost POC jaundice detection technology for newborns remains an unsolved challenge globally.

Designed Tb(III)-Functionalized MOF-808 as Visible Fluorescent Probes for Monitoring Bilirubin and Identifying Fingerprints

Abnormal bilirubin (BR) level is a sign of several fatal diseases, so it is of great significance and challenge to develop a facile and effective family routine strategy for BR sensing. Herein, novel water-stable Tb³⁺@MOF-808 has been synthesized using a coordinated postsynthetic modification strategy and designed as a convenient and efficient fluorescence probe. The fabricated fluorescent probe exhibits a remarkable fluorescence quenching effect with the successive addition of BR, which displays fascinating features, such as fast response time, high sensitivity, and excellent selectivity. The quenching mechanism between the fluorescent probe and BR was also illustrated in detail. Importantly, the devised fluorescent probe successfully achieved the determination of BR in serum and urine, which has also been successfully used in the design of portable BR test paper. The developed monitoring platform for BR levels in vivo provides promising application potential for the prevention and early diagnosis of fatal diseases. Additionally, a molecular logic gate device that performs intelligent fluorescent sensing of BR was constructed. More interestingly, Tb³⁺@MOF-808 is used for development of latent fingerprints on different guest surfaces. The lines of the fluorescent fingerprints are clear and coherent, the details are obvious, and even sweat pores can be observed by naked eyes, which provides new means for tracking the criminal clue and handling cases efficiently.

An effective enzymatic assay for pH selectively measuring direct and total bilirubin concentration by using of CotA

In this study, we aimed to develop B. subtilis spore coat protein A (CotA) for the enzymatic determination of bilirubin. Firstly, molecular docking and oxidation kinetic analysis confirmed the feasibility of CotA for oxidizing bilirubin. Secondly, CotA showed pH-preferable oxidization performance to direct bilirubin (DB) in acidic conditions and an alkaline-catalytic oxidation capacity to total bilirubin (TB). Mechanism analysis results confirm that the conformational changes of CotA, DB and UB caused by pH changes are responsible for the selective oxidation of DB and TB by CotA. Then, CotA exhibits better structural characteristics and enzymatic performance than M. verrucaria-derived bilirubin oxidase (Mv-BOD). Besides, the strong anti-interference ability helps CotA adapt to complex catalytic environment in the detection of DB and TB. Our results prove that CotA can be used as a promising candidate bio-enzymatic detection reagent for DB and TB.

Aggregation-induced emission enhancement of gold nanoclusters in metal-organic frameworks for highly sensitive fluorescent detection of bilirubin

A fluorescence analysis method based on gold nanocluster (AuNC) and metal-organic framework (MOF) composite materials (AuNCs@ZIF-8) was established for highly sensitive detection of bilirubin (BR). First, AuNCs@ZIF-8 was successfully obtained by co-precipitation and displayed an aggregation-induced emission enhancement by the confinement effect of the MOFs (i.e., ZIF-8). The product showed approximately 7.0 times enhancement in the quantum yield and longer fluorescence lifetime from 2.29 μs to 11.51 μs compared with AuNCs. When BR combined with the metal node Zn2+ of ZIF-8, the skeleton of the composite was destroyed, leading to a great decrease in the fluorescence intensity by the transformation of the AuNCs from the aggregated state to dispersed state. The linear range for the detection of BR was 0.1-5.0 μM, with the limit of detection (LOD) of 0.07 μM (S/N = 3). The AuNCs@ZIF-8 exhibited a selective response toward BR within 5 min and detected BR in human serum. The long-wavelength emission by AuNCs avoided the interference of the complex biomatrix background fluorescence, indicating their great application prospects for clinical diagnosis.

Water-stable Cd(ii)/Zn(ii) coordination polymers as recyclable luminescent sensors for detecting hippuric acid in simulated urine for indexing toluene exposure with high selectivity, sensitivity and fast response

Three novel Cd(ii)/Zn(ii) coordination polymers (CPs), namely [Cd(L)(BPDC)0.5H2O]·0.5H2O (1), [Zn2(L)2(BPDC)]·2H2O (2) and [Cd2(L)(BTC)H2O]·3H2O (3) (L = 4-(tetrazol-5-yl)phenyl-4,2':6',4''-terpyridine, H2BPDC = 4,4'-biphenyldicarboxylic acid, and H3BTC = 1,3,5-benzenetricarboxylic acid), have been successfully synthesized and characterized. CP 1 and CP 2 display new two-dimensional double-layered honeycomb frameworks containing uncoordinated nitrogen atoms from pyridine and tetrazole rings, which can easily form hydrogen bonds with various analytes. CP 3 exhibits a 3D framework also with uncoordinated nitrogen atoms from pyridine and tetrazole rings. The fluorescence explorations indicate that CPs 1-3 exhibit strong blue luminescence and excellent chemical stability under a relatively wide range of pH conditions. It is worth noting that CPs 1-3 can quantitatively detect hippuric acid (HA), which is a metabolite of toluene in human urine, with high selectivity, sensitivity, fast response and relatively low detection limits. Moreover, the sensing mechanism of CPs 1-3 for HA can mainly be ascribed to fluorescence resonance energy transfer (FRET). CPs 1-3 could be ideal candidates as HA sensors in human urine samples for practical applications. Notably, to the best of our knowledge, we report for the first time Cd(ii)/Zn(ii)-based luminescent sensors for detecting HA in simulated urine.

Biofluidic material-based carriers: Potential systems for crossing cellular barriers

Biofluids act as a repository for disease biomarkers and are excellent diagnostic tools applied in establishing a disease profile based on clinical testing, evaluation and monitoring the progression of patients suffering from various conditions. Furthermore, biofluids and their derived components such proteins, pigments, enzymes, hormones and cells carry a potential in the development of therapeutic drug delivery systems or as cargo materials for targeting the drug to the site of action. The presence of biofluids with respect to their specific location reveals the information of disease progression and mechanism, delivery aspects such as routes of administration as well as pharmacological factors such as binding affinity, rate of kinetics, efficacy, bioavailability and patient compliance. This review focuses on the properties and functional benefits of some biofluids, namely blood, saliva, bile, urine, amniotic fluid, synovial fluid and cerebrospinal fluid. It also covers the therapeutic and targeting action of fluid-derived substances in various micro- or nano-systems like nanohybrids, nanoparticles, self-assembled micelles, microparticles, cell-based systems, etc. The formulation of such biologically-oriented systems demonstrate the advantages of natural origin, biocompatibility and biodegradability and offer new techniques for overcoming the challenges experienced in conventional therapies.

A ratiometric bilirubin sensor based on a fluorescent gold nanocluster film with dual emissions

Bilirubin originates from hemoglobin metabolism and is an important biomarker for liver function. A ratiometric film sensor based on gold nanoclusters (AuNCs) was fabricated for highly sensitive determination of free bilirubin (fBR). Using bovine serum albumin (BSA) as a template, AuNCs that can emit blue and red fluorescence were prepared by the hydrothermal method at different pH values. Two kinds of AuNCs were incorporated into a single film by the layer-by-layer assembly (LBL) technique. The obtained thin-film showed dual fluorescence peaks excited at 372 nm, corresponding to the blue (443 nm) and red (622 nm) emissions of AuNCs respectively. When fBR interacted with the film, both fluorescence peaks were quenched at different degrees. A ratiometric method for fBR detection was established based on the fluorescence intensity ratio of the two emissions. The linear calibration curve for fBR lay in the concentration range of 0.01-2.00 μmol L^-1 with a detection limit of 8.90 ± 0.34 nmol L^-1 (S/N = 3). The film sensor showed a quick and sensitive response to fBR and could detect fBR in real samples with satisfactory results.

Colorimetric detection and bio-magnification of bisphenol A in fish organs and water sources using 3',6'-bis(diethylamino)-2- ((3,4,5trimethyl benzylidene) amino) spiro [isoindoline -1,9'-xanthen ]-3-one (BTSIXO)-Fe3+ ion conjugate

Current study is focusing mainly on the development of simple, novel, and cost-effective optical sensor to detect and quantify Bisphenol A (BPA) contamination. We designed a very selective and sensitive colorimetric sensor using synthesized 3', 6'- bis(diethylamino) -2- ((3,4,5 trimethyl benzylidene) amino)spiro [isoindoline-1,9'-xanthen] -3-one (BTSIXO) conjugated with Fe³⁺-ions via very simple eco- friendly synthetic protocol. The sensor has an excellent wide detection range for BPA from 0.1 to 150 ppm with LODs of 0.02 ppm. Finally, the applicability of the sensor was demonstrated in fish samples especially in the organs of Oreochromis mossambicus fingerlings and contaminated industrial water samples. The sensor was also applied for the quantification of BPA present drinking water stored in the plastic bottles. The developed sensor has shown a good agreement and accuracy when compared with ESI-Mass techniques.

Three-dimensional microfluidic tape-paper-based sensing device for blood total bilirubin measurement in jaundiced neonates

More than 60% newborns experience hyperbilirubinemia and jaundice within the initial week after birth due to the accumulation of total bilirubin in blood. Left untreated high levels of bilirubin may result in brain impairment. Simple, fast, accurate, low-cost and timely point-of-care (POC) analysis of total bilirubin is an unmet need especially in resource-limited areas. This work introduces a novel sensing device, named a "tape-paper sensor", capable of separating plasma from whole blood and measuring total bilirubin by a colorimetric diazotization method. The tape-paper sensing method overcomes non-homogeneous color distribution caused by the "coffee stain" effect, which improves the accuracy of colorimetric evaluation on paper-based analytical devices. The level of hemolysis in the plasma extracted by the device is evaluated, confirming no interference in the detection of total bilirubin. The accuracy of the tape-paper sensing approach for neonatal blood sample measurement is verified by comparison with the hospital pathology laboratory method. The small volume of samples and reagents, minimal equipment (an office scanner), fast detection (<10 min) and low fabrication cost (∼A$ 0.6) reveal the suitability of the device for POC use and in resource-limited settings. The tape-paper sensor is a low-cost, fast, and user-friendly device for measurement of blood total bilirubin levels in neonatal jaundice diagnostics.

A simple and fast protocol for the synthesis of 2-amino-4-(4-formylphenyl)-4H-chromene-3-carbonitrile to develop an optical immunoassay for the quantification of botulinum neurotoxin type F

In this study, a novel optical immunoassay platform using (S)-2-amino-4-(4-formylphenyl)-4H-chromene-3-carbonitrile, which was synthesized by an ultra-sonication method, as an optical probe.

Efficient detection of a biomarker for infant jaundice by a europium(iii)-organic framework luminescence sensor

Efficient detection of excess bilirubin in human serum and urine is highly important for the early diagnosis of infant jaundice. A highly stable Eu(iii)-based microporous framework with bent {Eu(COO)} chains interconnected by pairs of T-shaped 4,4'-(4,4'-bipyridine-2,6-diyl)dibenzoate (bpydb2-) linkers, {[Eu(H2O)(HCOO)(bpydb)]·solvent} n (1), was solvothermally synthesized and used as a chemical sensor for bilirubin response under clinically-applicable visible-light excitation. Due to the significant synergetic effect of the inner filter effect and photoinduced electron transfer, 1 can effectively probe trace amounts of bilirubin in aqueous solution through fluorescence decay with a strong quenching constant of 6.40 × 104 M-1 and low detection limit of 1.75 μM. More importantly, a portable test paper made from 1 was further developed to achieve qualitative, naked-eye visualized differentiation for the biomarker in clinical applications. These interesting findings highlight the importance of the π-conjugated antenna ligand for clinically applicable Ln-MOF sensors.

Fabrication of regular macro-mesoporous reduced graphene aerogel beads with ultra-high mechanical property for efficient bilirubin adsorption

Three-dimensional graphene materials have been widely studied in many fields for their role as potential absorbent, especially for bilirubin adsorption. In this study, we developed a simple method to prepare reduced graphene aerogel beads as hemoperfusion materials for fast bilirubin adsorption. The graphene oxide (GO) aerogel beads were produced by self-assembly of GO nanosheet that cross-linked by Ca²⁺ previously in a coagulation bath, then it was reduced by ascorbic acid and lyophilized to yield the reduced graphene aerogel beads. The beads had a regular macroscopic spherical structure with a diameter of about 1.3-2 mm, where the macroporosity was about 10 μm and the mesoporosity was about 12 nm. The macro-mesoporous structure also gave the reduced graphene aerogel beads ultra-high mechanical strengths and high specific surface area, which were both important for hemoperfusion materials. Moreover, the fixed-bed column adsorption revealed that the reduced graphene aerogel beads manifested excellent bilirubin adsorption (649.512 mg/g) with a rapid adsorption equilibrium time (1.5 h) under the optimized conditions. Even in the bilirubin-enriched blood, the adsorption capacity of the beads could reach 367.14 mg/g. Furthermore, the aerogel beads had a low hemolysis ratio and improved anticoagulant property showing good blood compatibility. Hence, the spherical reduced graphene aerogel beads with millimeter-level size presented a good potential for clinical applications in hemoperfusion therapy.

A Gold Nanoclusters Film Supported on Polydopamine for Fluorescent Sensing of Free Bilirubin

Serum bilirubin is an important biomarker for the diagnosis of various types of liver diseases and blood disorders. A polydopamine/gold nanoclusters composite film was fabricated for the fluorescent sensing of free bilirubin. Bovine serum albumin (BSA)-stabilized gold nanoclusters (AuNCs) were used as probes for biorecognition. The polydopamine film was utilized as an adhesion layer for immobilization of AuNCs. When the composite film was exposed to free bilirubin, due to the complex that was formed between BSA and free bilirubin, the fluorescence intensity of the composite film was gradually weakened as the bilirubin concentration increased. The fluorescence quenching ratio (F₀/F) was linearly proportional to free bilirubin over the concentration range of 0.8~50 μmol/L with a limit of detection of 0.61 ± 0.12 μmol/L (S/N = 3). The response was quick, the film was recyclable, and common ingredients in human serum did not interfere with the detection of free bilirubin.

Designing of New Optical Immunosensors Based on 2-Amino-4-(anthracen-9-yl)-7-hydroxy-4H-chromene-3-carbonitrile for the Detection of Aeromonas hydrophila in the Organs of Oreochromis mossambicus Fingerlings

A one-pot greener methodology has been adopted for the synthesis of a simple 4H-chromene core-based fluorescent tag of (S)-2-amino-4-(anthracen-9-yl)-7-hydroxy-4H-chromene-3-carbonitrile (AHC), and its structure has been analyzed using NMR spectroscopy. The physicochemical properties of AHC were well-studied by UV-vis and fluorescent spectroscopy techniques. As a result of excellent emitting property (ϕ ≈ 0.75), it has been coupled with anti-AH through amide linkage, and the AHC-tagged anti-AH has been used as an immunoassay for the selective detection of Aeromonas hydrophila in the presence of interfering pathogens. Under optimized conditions, immunosensors could successfully quantify A. hydrophila from 4 to 736 CFU/mL, and the LOD was 2 CFU/mL. Saliently, the immunoassay has been successfully demonstrated for the analysis of A. hydrophila in the organs of Oreochromis mossambicusfingerlings, and results have shown a very good agreement with our optimized neat AH fluorimetric titration results.

A recyclable post-synthetically modified Al(iii) based metal–organic framework for fast and selective fluorogenic recognition of bilirubin in human biofluids

The ultra-fast, highly sensitive and selective sensing features of bilirubin in human biofluids by a post-synthetically modified Al(iii) MOF are presented.

A pH-Controlled Kit for Total and Direct Bilirubin Built on Mimetic Peroxidase CoFe2O4-DOPA-Catalyzed Fluorescence Enhancement

Facile and reliable detection of total bilirubin (Bt, summation of indirect and direct bilirubin) and direct bilirubin (Bd) in human serum is of crucial importance to clinical diagnosis. However, it is still a challenge to explore an ideal recognition system for discriminating Bd and indirect bilirubin (Bi). In this work, a dual-functional sensor for Bt and Bd was first built on pH-controlled and mimetic peroxidase-catalyzed fluorescence enhancement. The fluorescence of nitrogen-doped graphene quantum dots (NGQDs) can be effectively quenched by bilirubin through the IFE process. With the catalysis of dopamine-derived magnetic ferrite nanoparticles (CoFe₂O₄-DOPA), both Bd and Bi were oxidized by H₂O₂ to colorless and fluorescent oxidates at pH 8.0. Interestingly, only Bd was oxidized at pH 3.5. The discriminating principle of Bd and Bi relied on their pH-controlled oxidation potentials. A sensitive sensor for Bt and Bd was developed on the enhanced fluorescence of the NGQDs/CoFe₂O₄-DOPA/H₂O₂ sensing system after bilirubin oxidation, which was originated from a combination of the fluorescence recovery of NGQDs and newly spawned fluorescence of bilirubin oxidates. The designed probe well quantifies Bt and Bd with the detection limits of 10 and 50 nM, respectively. Moreover, a portable diagnostic kit was fabricated and successfully used for the detection of Bt and Bd in 60 unrelated human serum samples, and the obtained results were almost consistent with those measured by biochemistry analyzer. The present kit exhibits the superiorities of high sensitivity and stability, interference-resistant, and green reagents, making it a promising candidate for bilirubin detection in the clinical diagnosis of jaundice.

Development of new methods for determination of bilirubin

The ever-increasing demand for a sensitive, rapid and reliable method for determination of serum bilirubin level has been inciting the interest of the researchers to develop new methods for both laboratory set up and point of care applications. These efforts embrace measurement of different forms of bilirubin, such as, unconjugated (free and albumin bound) bilirubin, conjugated (direct) bilirubin, and total (both conjugated and unconjugated) bilirubin in the serum that may provide critical information useful for diagnosis of many diseases and metabolic disorders. Herein, an effort has been made to provide a broad overview on the subject starting from the conventional spectroscopy based analytical methods widely practiced in the laboratory setup along with the sophisticated instrument based sensitive methods suitable for determination of different forms of bilirubin to various portable low cost systems applicable in point of care (POC) settings. In all these discussions emphasis is given on the novel methods and techniques bearing potential to measure the bilirubin level in biological samples reliably with less technical complexity and cost. We expect that this review will serve as a ready reference for the researchers and clinical professionals working on the subject and allied fields.

Selective non-enzymatic total bilirubin detection in serum using europium complexes with different β-diketone-derived ligands as luminescence probes

Three europium(III) complexes, Eu(ectfd)₃ (Hectfd = 1-(9-ethyl-9H-carbazol-7-yl)-4,4,4-trifluorobutane-1,3-dione), Eu(tta)₃ (Htta = 4,4,4-trifluoro-1-(thiophen-2-yl)-butane-1,3-dione), and Eu(dbt)₃ (Hdbt = 2-(4',4',4'-trifluoro-1',3'-dioxobutyl)dibenzothiophene), were synthesized and employed to detect total bilirubin (BR) in blood-serum samples. UV-visible absorption and fluorescence (FL) spectroscopies were used to evaluate the selectivity of each europium (III) fluorescence probe to BR, which was shown to remarkably reduce the luminescence intensities of the europium(III) complexes at a wavelength of 612 nm. The luminescence intensity of each complex is linearly related to BR concentration. Eu(tta)₃ was shown to be the more-appropriate fluorescence probe for the sensitive and reliable detection of total BR in blood serum samples than either Eu(ectfd)₃ or Eu(dbt)₃. This observation can be ascribed to special σ-hole bonding between Htta and BR. In addition, the optimal pH test conditions for the detection of BR in human serum by the Eu(tta)₃ probe were determined. Sensitivity was shown to be dramatically affected by the pH of the medium. The experimental results reveal that pH 7.5 is optimal for this probe, which coincides with the pH of human serum. Furthermore, BR detection using the Eu(tta)₃ luminescence probe is simple, practical, and relatively free of interference from coexisting substances; it has a minimum detection limit (DL) of 68 nM and is a potential candidate for the routine assessment of total BR in serum samples. Graphical Abstract ᅟ.

Blue emitting copper nanoclusters as colorimetric and fluorescent probe for the selective detection of bilirubin

Hurdles to develop point of care diagnostic methods restrict the translation of progress in the health care sector from bench side to bedside. In this article a simple, cost effective fluorescent as well as colorimetric nanosensor was developed for the early and easy detection of hyperbilirubinemia. A stable, water soluble bovine serum albumin stabilised copper nanocluster (BSA CuNC) was used as the fluorescent probe which exhibited strong blue emission (404nm) upon 330nm excitation. The fluorescence of the BSA CuNC can be effectively quenched by the addition of bilirubin by the formation of copper-bilirubin complex. Meanwhile the copper-bilirubin complex resulted in an observable colour change from pale violet to green facilitating colorimetric detection. The prepared sensor displayed good selectivity and sensitivity over other co-existing molecules, and can be used for quantifying bilirubin with a detection limit down to 257fM. Additionally, the as-prepared probe was coated on a paper strip to develop a portable paper strip sensor of bilirubin. Moreover, the method was successfully applied in real sample analysis and obtained promising result.

Electrochemical Sensor for Bilirubin Detection Using Screen Printed Electrodes Functionalized with Carbon Nanotubes and Graphene

Practice oriented point-of-care diagnostics require easy-to-handle, miniaturized, and low-cost analytical tools. In a novel approach, screen printed carbon electrodes (SPEs), which were functionalized with nanomaterials, are employed for selective measurements of bilirubin, which is an important biomarker for jaundice. Multi-walled carbon nanotubes (MWCNT) and graphene separately deposited on SPEs provide the core of an electrochemical sensor for bilirubin. The electrocatalytic activity towards bilirubin oxidation (bilirubin to biliverdin) was observed at +0.25 V. In addition, a further peak corresponding to the electrochemical conversion of biliverdin into purpurin appeared at +0.48 V. When compared to MWCNT, the graphene type shows a 3-fold lower detection limit (0.3 ± 0.022 nM and 0.1 ± 0.018 nM, respectively), moreover, the graphene type exhibits a larger linear range (0.1-600 µM) than MWCNT (0.5-500 µM) with a two-fold better sensitivity, i.e., 30 nA µM^-1 cm^-2, and 15 nA µM^-1 cm^-2, respectively. The viability is validated through measurements of bilirubin in blood serum samples and the selectivity is ensured by inhibiting common interfering biological substrates using an ionic nafion membrane. The presented approach enables the design and implementation of low cost and miniaturized electrochemical sensors.

Highly Sensitive and Selective Sensing of Free Bilirubin Using Metal-Organic Frameworks-Based Energy Transfer Process

Free bilirubin, a key biomarker for jaundice, was detected with a newly designed fluorescent postsynthetically modified metal organic framework (MOF) (UIO-66-PSM) sensor. UiO-66-PSM was prepared based on the aldimine condensation reaction of UiO-66-NH₂ with 2,3,4-trihydroxybenzaldehyde. The fluorescence of UIO-66-PSM could be effectively quenched by free bilirubin via a fluorescent resonant energy transfer process, thus achieving its recognition of free bilirubin. It was the first attempt to design a MOF-based fluorescent probe for sensing free bilirubin. The probe exhibited fast response time, low detection limit, wide linear range, and high selectivity toward free bilirubin. The sensing system enabled the monitor of free bilirubin in real human serum. Hence, the reported free bilirubin sensing platform has potential applications for clinical diagnosis of jaundice.