A smartphone-based chloridometer for point-of-care diagnostics of cystic fibrosis

Luminescence Probes in Bio-Applications: From Principle to Practice

Bioanalysis based on optical imaging has gained significant progress in the last few decades. Luminescence probes are capable of detecting, monitoring, and tracing particular biomolecules in complex biological systems to figure out the roles of these molecules in organisms. Considering the rapid development of luminescence probes for bio-applications and their promising future, we have attempted to explore the working principles and recent advances in bio-applications of luminescence probes, in the hope of helping readers gain a detailed understanding of luminescence probes developed in recent years. In this review, we first focus on the current widely used luminescence probes, including fluorescence probes, bioluminescence probes, chemiluminescence probes, afterglow probes, photoacoustic probes, and Cerenkov luminescence probes. The working principles for each type of luminescence probe are concisely described and the bio-application of the luminescence probes is summarized by category, including metal ions detection, secretion detection, imaging, and therapy.

Plant-inspired multifunctional fluorescent cellulose nanocrystals intelligent nanocomposite hydrogel

Intelligent hydrogel has great application potentials in flexible sensing and artificial intelligence devices due to its intrinsic characteristics. However, developing an intelligent hydrogel with favorable properties including high strength, superior toughness, excellent conductivity and ionic sensing via a facile route is still a challenge. Herein, inspired by biologically chelating interactions of phytic acid (PA) in plants, a plant-inspired versatile intelligent nanocomposite hydrogel was readily fabricated by incorporating PA into the interface of fluorescent cellulose nanocrystals (F-CNC). Under PA "molecular bridge", the hydrogel simultaneously realized superflexibility (1000 %), high strength, superb self-healing ability, remarkable fluorescence and chloride ion sensibility as well as good ionic conductivity (2.4 S/m). The hydrogel could be assembled as a flexible sensor for real-time monitoring of human motion with excellent sensitivity and stability since high sensitivity toward both strain and pressure. F-CNC acted as a functional trigger could confer the hydrogel good fluorescence and high sensitivity toward chloride ion. This design confirms the synergy of F-CNC in boosting strength, ionic sensing, and ionic conductivity, addressing a long-standing dilemma among strength, stretchability, and sensitivity for intelligent hydrogel. The one-step incorporating tactic under mild ambient conditions may open an innovative avenue for the construction of intelligent hydrogel with novel properties.

Citric Acid-Based Intrinsic Band-Shifting Photoluminescent Materials

Citric acid, an important metabolite with abundant reactive groups, has been demonstrated as a promising starting material to synthesize diverse photoluminescent materials including small molecules, polymers, and carbon dots. The unique citrate chemistry enables the development of a series of citric acid-based molecules and nanomaterials with intriguing intrinsic band-shifting behavior, where the emission wavelength shifts as the excitation wavelength increases, ideal for chromatic imaging and many other applications. In this review, we discuss the concept of "intrinsic band-shifting photoluminescent materials", introduce the recent advances in citric acid-based intrinsic band-shifting materials, and discuss their potential applications such as chromatic imaging and multimodal sensing. It is our hope that the insightful and forward-thinking discussion in this review will spur the innovation and applications of the unique band-shifting photoluminescent materials.

Fluorescence-Based Portable Assays for Detection of Biological and Chemical Analytes

Fluorescence-based detection techniques are part of an ever-expanding field and are widely used in biomedical and environmental research as a biosensing tool. These techniques have high sensitivity, selectivity, and a short response time, making them a valuable tool for developing bio-chemical assays. The endpoint of these assays is defined by changes in fluorescence signal, in terms of its intensity, lifetime, and/or shift in spectrum, which is monitored using readout devices such as microscopes, fluorometers, and cytometers. However, these devices are often bulky, expensive, and require supervision to operate, which makes them inaccessible in resource-limited settings. To address these issues, significant effort has been directed towards integrating fluorescence-based assays into miniature platforms based on papers, hydrogels, and microfluidic devices, and to couple these assays with portable readout devices like smartphones and wearable optical sensors, thereby enabling point-of-care detection of bio-chemical analytes. This review highlights some of the recently developed portable fluorescence-based assays by discussing the design of fluorescent sensor molecules, their sensing strategy, and the fabrication of point-of-care devices.

Moving toward smart biomedical sensing

The development of novel biomedical sensors as highly promising devices/tools in early diagnosis and therapy monitoring of many diseases and disorders has recently witnessed unprecedented growth; more and faster than ever. Nonetheless, on the eve of Industry 5.0 and by learning from defects of current sensors in smart diagnostics of pandemics, there is still a long way to go to achieve the ideal biomedical sensors capable of meeting the growing needs and expectations for smart biomedical/diagnostic sensing through eHealth systems. Herein, an overview is provided to highlight the importance and necessity of an inevitable transition in the era of digital health/Healthcare 4.0 towards smart biomedical/diagnostic sensing and how to approach it via new digital technologies including Internet of Things (IoT), artificial intelligence, IoT gateways (smartphones, readers), etc. This review will bring together the different types of smartphone/reader-based biomedical sensors, which have been employing for a wide variety of optical/electrical/electrochemical biosensing applications and paving the way for future eHealth diagnostic devices by moving towards smart biomedical sensing. Here, alongside highlighting the characteristics/criteria that should be met by the developed sensors towards smart biomedical sensing, the challenging issues ahead are delineated along with a comprehensive outlook on this extremely necessary field.

Microneedles for Efficient and Precise Drug Delivery in Cancer Therapy

Cancer is the leading cause of death, acting as a global burden, severely impacting the patients’ quality of life and affecting the world economy despite the expansion of cumulative advances in oncology. The current conventional therapies for cancer which involve long treatment duration and systemic exposure of drugs leads to premature degradation of drugs, a massive amount of pain, side effects, as well as the recurrence of the condition. There is also an urgent demand for personalized and precision-based medicine, especially after the recent pandemic, to avoid future delays in diagnosis or treatments for cancer patients as they are very essential in reducing the global mortality rate. Recently, microneedles which consist of a patch with tiny, micron-sized needles attached to it have been quite a sensation as an emerging technology for transdermal application to diagnose or treat various illnesses. The application of microneedles in cancer therapies is also being extensively studied as they offer a myriad of benefits, especially since microneedle patches offer a better treatment approach through self administration, painless treatment, and being an economically and environmentally friendly approach in comparison with other conventional methods. The painless gains from microneedles significantly improves the survival rate of cancer patients. The emergence of versatile and innovative transdermal drug delivery systems presents a prime breakthrough opportunity for safer and more effective therapies, which could meet the demands of cancer diagnosis and treatment through different application scenarios. This review highlights the types of microneedles, fabrication methods and materials, along with the recent advances and opportunities. In addition, this review also addresses the challenges and limitations of microneedles in cancer therapy with solutions through current studies and future works to facilitate the clinical translation of microneedles in cancer therapies.

Artificial Neural Network-Assisted Wearable Flexible Sweat Patch for Drug Management in Parkinson's Patients Based on Vacancy-Engineered Processing of g-C3N4

Herein, we developed a flexible, low-cost non-enzymatic sweat sensing chip for in situ acquisition of bioinformation in sweat of individuals under exercise conditions to advance personal health monitoring and medication management for patients with Parkinson's disease. This low-cost, flexible, wearable sweat sensor consists of a printed screen electrode modified with g-C₃N₄ material and an external MSME element. The doping strategy and surface activation strategy of the g-C₃N₄-based exhibited efficient glucose oxidase-like activity and electrochemical activity when testing l-dopa and glucose in sweat. The optimized signal was transmitted to a smartphone for processing 12 individuals with simulated dosing, enabling continuous monitoring of l-dopa metabolism in sweat and management of dosing. The generalization ability and robustness of models constructed by methods such as multiple linear regression, artificial neural networks, and convolutional neural networks were compared cross-sectionally. Deep learning models based on artificial neural networks help develop a user-personalized medication administration reminder system, which provides a promising paradigm for reliable medication supervision for Parkinson's patients in the Internet of Things era.

In situ synthesis of reagents in paper-based analytical devices using paper stacking

This article demonstrates a technique for the in situ synthesis of an insoluble analytical reagent in paper analytical devices, using paper stacking. Previously, our group has demonstrated that stacking a fast-wicking paper membrane on top of a slow-wicking paper membrane containing dried reagents enables the uniform rehydration of the dried reagents over large areas. This technique is utilized here to fabricate distance-based sweat chloride quantification strips, which requires the synthesis of insoluble silver chromate as an analytical reagent in paper. The in situ generation of silver chromate for sweat chloride detection was previously accomplished by manually dipping a hydrophobically patterned paper channel into multiple precursor solutions with intermittent washing and drying. Compared to the previous technique, the stacking method obviates the need for (i) patterning hydrophobic barriers in paper for creation of flow channels, and (ii) multiple dipping steps that need large reagent volumes. The method is amenable to large scale manufacturing as the insoluble reagent can be synthesized uniformly over large paper areas and can then be cut into multiple sensing strips. The developed sensor has a limit of detection of ∼0.3 mM and a wide linear dynamic range of 0-120 mM for the detection of chloride ions, which enables the diagnosis of cystic fibrosis, characterized by sweat chloride levels greater than 60 mM. This simple technique of in situ synthesis of insoluble analytical reagents in paper could enable expanding the range of analytical chemistries that may be performed in paper-based analytical devices.

Fluorescent Zn(II)-Based Metal-Organic Framework: Interaction with Organic Solvents and CO2 and Methane Capture

Adsorption of carbon dioxide (CO₂), as well as many other kinds of small molecules, is of importance for industrial and sensing applications. Metal-organic framework (MOF)-based adsorbents are spotlighted for such applications. An essential for MOF adsorbent application is a simple and easy fabrication process, preferably from a cheap, sustainable, and environmentally friendly ligand. Herein, we fabricated a novel structural, thermally stable MOF with fluorescence properties, namely Zn [5-oxo-2,3-dihydro-5H-[1,3]-thiazolo [3,2-a]pyridine-3,7-dicarboxylic acid (TPDCA)] • dimethylformamide (DMF) •0.25 H₂O (coded as QUF-001 MOF), in solvothermal conditions by using zinc nitrate as a source of metal ion and TPDCA as a ligand easy accessible from citric acid and cysteine. Single crystal X-ray diffraction analysis and microscopic examination revealed the two-dimensional character of the formed MOF. Upon treatment of QUF-001 with organic solvents (such as methanol, isopropanol, chloroform, dimethylformamide, tetrahydrofuran, hexane), interactions were observed and changes in fluorescence maxima as well as in the powder diffraction patterns were noticed, indicating the inclusion and intercalation of the solvents into the interlamellar space of the crystal structure of QUF-001. Furthermore, CO₂ and CH₄ molecule sorption properties for QUF-001 reached up to 1.6 mmol/g and 8.1 mmol/g, respectively, at 298 K and a pressure of 50 bars.

One-Pot Green Preparation of Fluorescent Cellulose Nanofibers

Fluorescent cellulose nanofibers (FCNFs), with a high yield, were prepared via one-pot hydrolysis and the grafting reaction of cellulose with thiazolipyridine carboxylic acid (TPCA). The hydrolysis and Fischer esterification of cellulose were conducted under microwave-hydrothermal conditions; meanwhile, TPCA formation was induced by the dehydration reaction between L-cysteine and citric acid. The effects of the reaction temperature and reaction time on the yield and performance of FCNF were investigated. The morphology and size, surface chemical property, crystal structure, thermostability, and fluorescent performance of FCNF were characterized. The results revealed that the yield of FCNF reached 73.2% under a microwave power of 500 W, reaction temperature of 110 °C, and reaction time of 5 h. The FCNF obtained presents a short rod-like morphology. The crystallinity of the FCNFs is 80%, and their thermal stability did not decline significantly. Additionally, the fluorescent performance of the FCNFs is excellent, which results in them having good sensitivity to chloride ions. The good fluorescent performance and significant responsiveness to chloride ions of FCNFs lead to them having broad prospects in bio-labeling, biosensing, information storage, chloride ion detection, among others.

Assessing citric acid-derived luminescent probes for pH and ammonia sensing: A comprehensive experimental and theoretical study

The present work reports on the assessment of luminescent probes derived from citric acid (CA) and β-aminothiols (namely, l-cysteine (Cys) and cysteamine) for instrumental and smartphone-based fluorimetric sensing purposes. Remarkably, the evaluated luminescent probes derived from natural compounds showed pH-dependent dual excitation/dual emission features. Both fluorophores hold promise for the ratiometric fluorimetric sensing of pH, being especially convenient for the smartphone-based sensing of pH via ratiometric analysis by proper selection of B and G color channels. Time dependent density functional theory (TDDFT) calculations allowed to substantiate the pH dependent structure-property relationship and to unveil the critical role of the CA derived carboxyl group, these findings contributing to the fundamental knowledge on these systems for the rational design of new fluorophores and in establishing fluorescence sensing mechanisms of CA-derived systems. Besides, paper-based devices modified with CA-Cys were implemented in a three-phase separation approach for sensitive and selective ammonia sensing, yielding a remarkable enrichment factor of 389 and a limit of detection of 37 μM under optimal conditions. The proposed approach was successfully applied to the determination of ammonia nitrogen and extractable ammonium in water samples and marine sediments, respectively.

Paper-Based Device for Sweat Chloride Testing Based on the Photochemical Response of Silver Halide Nanocrystals

A new method for the determination of chloride anions in sweat is described. The novelty of the method relies on the different photochemical response of silver ions and silver chloride crystals when exposed to UV light. Silver ions undergo an intense colorimetric transition from colorless to dark grey-brown due to the formation of nanosized Ag while AgCl exhibits a less intense color change from white to slightly grey. The analytical signal is obtained as mean grey value of color intensity on the paper surface and is expressed as the absolute difference between the signal of the blank (i.e., in absence of chloride) and the sample (i.e., in the presence of chloride). The method is simple to perform (addition of sample, incubation in the absence of light, irradiation, and offline measurement in a flatbed scanner), does not require any special signal processing steps (the color intensity is directly measured from a constant window on the paper surface without any imager processing) and is performed with minimum sample volume (2 μL). The method operates within a large chloride concentration range (10–140 mM) with good detection limits (2.7 mM chloride), satisfactory recoveries (95.2–108.7%), and reproducibility (<9%). Based on these data the method could serve as a potential tool for the diagnosis of cystic fibrosis through the determination of chloride in human sweat.

Low-cost devices with fluorescence spots brightness and size dual-mode readout for the rapid detection of Cr(VI) based on smartphones

Sensitive, convenient and rapid detection devices for toxic Cr(VI) suitable for filed use are required. Smartphone can be used as the detector, but the quality of images taken with a smartphone may depend on the ambient light and the operator. In this work, two types of low-cost and portable smartphone-based devices used for fluorescence spots brightness and size dual-mode detection of Cr(VI) were constructed with the aid of the 3D printing, which avoids the effect of ambient light and maintains a fixed position of the phone camera relative to the samples. Based on the brightness reflected by the blue channel of RGB values of the images of carbon nanodots, a linear relationship between quenching efficiency and concentration of Cr(VI) in a range of 0.2-150 μM with a limit of detection of 0.058 μM was attained, which is comparable to or better than that from fluorescence spectrometers. With the size variation of fluorescence spots, a linear range of 10-350 μM was acquired and it is more intuitive for direct naked-eye estimation of the concentration of Cr(VI). The applicability of the proposed devices for the detection of Cr(VI) was verified with water and soil samples with recoveries ranging in 95.0-108.2%.

Optical-Based Biosensors and Their Portable Healthcare Devices for Detecting and Monitoring Biomarkers in Body Fluids

The detection and monitoring of biomarkers in body fluids has been used to improve human healthcare activities for decades. In recent years, researchers have focused their attention on applying the point-of-care (POC) strategies into biomarker detection. The evolution of mobile technologies has allowed researchers to develop numerous portable medical devices that aim to deliver comparable results to clinical measurements. Among these, optical-based detection methods have been considered as one of the common and efficient ways to detect and monitor the presence of biomarkers in bodily fluids, and emerging aggregation-induced emission luminogens (AIEgens) with their distinct features are merging with portable medical devices. In this review, the detection methodologies that use optical measurements in the POC systems for the detection and monitoring of biomarkers in bodily fluids are compared, including colorimetry, fluorescence and chemiluminescence measurements. The current portable technologies, with or without the use of smartphones in device development, that are combined with optical biosensors for the detection and monitoring of biomarkers in body fluids, are also investigated. The review also discusses novel AIEgens used in the portable systems for the detection and monitoring of biomarkers in body fluid. Finally, the potential of future developments and the use of optical detection-based portable devices in healthcare activities are explored.

Colorimetric Detection Based on Localized Surface Plasmon Resonance for Determination of Chemicals in Urine

Colorimetric sensors based on localized surface plasmon resonance (LSPR) have attracted much attention for biosensor and chemical sensor applications. The unique optical effect of LSPR is based on the nanostructure of noble metals (e.g., Au, Ag, and Al) and the refractive index of the environment surrounding these metal nanomaterials. When either the structure or the environment of these nanomaterials is changed, their optical properties change and can be observed by spectroscopic techniques or the naked eye. Colorimetric-probe-based LSPR provides a simple, rapid, real-time, nonlabelled, sensitive biochemical detection and can be used for point-of-care testing as well as rapid screening for the diagnosis of various diseases. Gold and silver nanoparticles, which are the two most widely used plasmonic nanomaterials, demonstrate strong and sensitive LSPR signals that can be used for the selective detection of several chemicals in biochemical compounds provided by the human body (e.g., urine and blood). This information can be used for the diagnosis of several human health conditions. This paper provides information regarding colorimetric probes based on LSPR for the detection of three major chemicals in human urine: creatinine, albumin, and glucose. In addition, the mechanisms of selective detection and quantitative analysis of these chemicals using metal nanoparticles are discussed along with colorimetric-detection-based LSPR for many other specific chemicals that can be detected in urine, such as catecholamine neurotransmitters, thymine, and various medicines. Furthermore, issues regarding the use of portable platforms for health monitoring with colorimetric detection based on LSPR are discussed.

Smartphone-based technique for the determination of a titration equivalence point from an RGB linear-segment curve with an example application to miniaturized titration of sodium chloride injections

A smartphone-based technique for determining the titration equivalence point from a linear-segment curve was developed for the first time. In this method, a titrant in an increasing microliter-volume was added to a set of sample aliquots containing an indicator covering both sides of the equivalence point. The solutions were subsequently photographed in one shot, in a dark box using a smartphone camera and an illuminating screen of a tablet or light emitting diode lamps arranged below a white acrylic sheet as a light source. After the colors of the solutions were delineated to Red, Green, and Blue (RGB) values, 1/log G was used to construct a plot in which the equivalence point was located at the intersection of the two lines in the region before and after the equivalence point. The technique was successfully applied to the miniaturized titration of sodium chloride injections, showing the good linear relationship of equivalence points to the sodium chloride concentration in the range of 0.4163-0.9675% w/v (R² of 0.9998). The assay was accurate (% recovery of 98.92-100.52), precise (% relative standard deviation ≤ 1.20), and unaffected by the use of different types of microplates, smartphones, and RGB analysis tools. Additionally, it required no expensive nor complicated equipment and offered the possibility of performing analysis on a single smartphone device when it was used with a mobile application developed to aid data processing and immediate production of reports of analytical results.

Smartphone-based optical analysis systems

During the past few decades, there has been a growing trend towards the use of smartphone-based analysis systems. This is mainly due to its ubiquity, its increasing computing capacity, its relatively low cost and the ability to acquire and process data at the same time. Furthermore, there are many sensors integrated into a smartphone, for example a complementary metal-oxide semiconductor (CMOS) sensor. A CMOS sensor enables optical analysis for example by using it as a colorimeter, photometer or spectrometer. This review explores the current state-of-the-art smartphone-based optical analysis systems in various areas of application. It is organized into three sections, each of which investigates one class of smartphone-based devices: (i) smartphone-based colorimeters (ii) smartphone-based photo- and spectrometers and (iii) smartphone-based fluorimeters.

Colorimetric sensing of chloride in sweat based on fluorescence wavelength shift via halide exchange of CsPbBr3 perovskite nanocrystals

Considering the high importance of the rapid detection of chloride ion (Cl^-) in sweat for the diagnosis of fibrotic cysts, we have investigated the heterogeneous halide exchange between CsPbBr₃ perovskite nanocrystals (PNCs) in n-hexane and Cl^- in aqueous solution. The results show that CsPbBr₃ PNCs could achieve fast halide exchange with Cl^- in the aqueous phase under magnetic stirring at pH = 1, accompanied by a significant wavelength blue shift and vivid fluorescence color changes from green to blue. Therefore, a fluorescence wavelength shift-based colorimetric sensing of Cl^- based on the halide exchange of CsPbBr₃ PNCs has been developed to realize the rapid detection of Cl^- in sweat. Compared with the conventional fluorescence intensity-based method, this method is of high convenience since the whole procedure could be achieved within 5 min without any sample pretreatment (even no dilution), demonstrating promising application prospects. Graphical Abstract Fluorescence wavelength-shift based colorimetric sensing of chloride in sweat via halide exchange of CsPbBr₃ perovskite nanocrystals.

Wearable Sweat Biosensors Refresh Personalized Health/Medical Diagnostics

Sweat contains a broad range of critical biomarkers including ions, small molecules, and macromolecules that may indirectly or directly reflect the health status of the human body and thereby help track disease progression. Wearable sweat biosensors enable the collection and analysis of sweat in situ, achieving real-time, continuous, and noninvasive monitoring of human biochemical parameters at the molecular level. This review summarizes the physiological/pathological information of sweat and wearable sweat biosensors. First, the production of sweat pertaining to various electrolytes, metabolites, and proteins is described. Then, the compositions of the wearable sweat biosensors are summarized, and the design of each subsystem is introduced in detail. The latest applications of wearable sweat biosensors for outdoor, hospital, and family monitoring are highlighted. Finally, the review provides a summary and an outlook on the future developments and challenges of wearable sweat biosensors with the aim of advancing the field of wearable sweat monitoring technology.

Arrowhead Technology for Digitalization and Automation Solution: Smart Cities and Smart Agriculture

The Internet of Things (IoT) concept has met requirements for security and reliability in domains like automotive industry, food industry, as well as precision agriculture. Furthermore, System of Systems (SoS) expands the use of local clouds for the evolution of integration and communication technologies. SoS devices need to ensure Quality of Service (QoS) capabilities including service-oriented management and different QoS characteristics monitoring. Smart applications depend on information quality since they are driven by processes which require communication robustness and enough bandwidth. Interconnectivity and interoperability facilities among different smart devices can be achieved using Arrowhead Framework technology via its core systems and services. Arrowhead Framework is targeting smart IoT devices with wide applicability areas including smart building, smart energy, smart cities, smart agriculture, etc. The advantages of Arrowhead Framework can be underlined by parameters such as transmission speed, latency, security, etc. This paper presents a survey of Arrowhead Framework in IoT/SoS dedicated architectures for smart cities and smart agriculture developed around smart cities, aiming to outline its significant impact on the global performances. The advantages of Arrowhead Framework technology are emphasized by analysis of several smart cities use-cases and a novel architecture for a telemetry system that will enable the use of Arrowhead technology in smart agriculture area is introduced and detailed by authors.

Construction of Bio/Nanointerfaces: Stable Gold Nanoparticle Bioconjugates in Complex Systems

The real application of DNA-functionalized gold nanoparticles (DNA-Au NPs) was limited by decreased stability and irreversible aggregation in high-ionic strength solutions and complex systems. Therefore, exploring a kind of DNA-Au NPs with excellent stability in high-ionic strength solutions and complex systems is challenging and significant. Herein, a novel universal bioconjugate strategy for constructing ultrastable DNA-Au NPs was designed based on the combination of polydopamine (PDA) shell and DNA linker. The obtained DNA-linked Au@polydopamine nanoparticles (DNA-Au@PDA NPs) showed colloidal stability in high-ionic strength solution and complex systems (such as human serum and cell culture supernatant). Moreover, the nanoparticles still maintained good dispersion after multiple freeze-thaw cycles. The high stability of DNA-Au@PDA NPs may be attributed to increasing the electrostatic and steric repulsions among nanoparticles through the effect of both PDA shell and DNA linker on Au@PDA NPs. For investigating the application of such nanoparticles, a highly sensitive assay for miRNA 141 detection was developed using DNA-Au@PDA NPs coupled with dynamic light scattering (DLS). Comparing with the regular DNA-Au NPs, DNA-Au@PDA NPs could detect as low as 50 pM miRNA 141 even in human whole serum. Taken together, the features of Bio/Nanointerface make the nanoparticle suitable for various applications in harsh biological and environmental conditions due to the stability. This work may provide a universal modification method for obtaining stable nanoparticles.

Identification of Molecular Fluorophore as a Component of Carbon Dots able to Induce Gelation in a Fluorescent Multivalent-Metal-Ion-Free Alginate Hydrogel

We introduce a simple approach to fabricate fluorescent multivalent metal ion-free alginate hydrogels, which can be produced using carbon dots accessible from natural sources (citric acid and L-cysteine). Molecular fluorophore 5-oxo-2,3-dihydro-5H-[1,3]-thiazolo[3,2-a] pyridine-3,7-dicarboxylic acid (TPDCA), which is formed during the synthesis of carbon dots, is identified as a key segment for the crosslinking of hydrogels. The crosslinking happens through dynamic complexation of carboxylic acid groups of TPDCA and alginate cages along with sodium ions. The TPDCA derived hydrogels are investigated regarding to their thermal, rheological and optical properties, and found to exhibit characteristic fluorescence of this aggregated molecular fluorophore. Moreover, gradient hydrogels with tunable mechanical and optical properties and controlled release are obtained upon immersion of the hydrogel reactors in solutions of divalent metal ions (Ca2+, Cu2+, and Ni2+) with a higher affinity to alginate.

Geometrical-optics approach to increase the accuracy in LED-based photometers for point-of-care testing

A geometrical-optics approach is proposed to increase the accuracy in photometric measurements, using a point-of-care testing (POCT) LED-based sensor. Due to stray-light effects, the measurement accuracy depends on the dimension of the CMOS area, where the radiation is detected. We propose two image processing approaches and evaluate the influence of the sensor area. In addition, we demonstrate that with the same measurement, both absorption coefficient and refractive index can be determined, measuring the beam attenuation and the spot-size enlargement due to ray refraction.

Polymeric biomaterials for biophotonic applications

With the growing importance of optical techniques in medical diagnosis and treatment, there exists a pressing need to develop and optimize materials platform for biophotonic applications. Particularly, the design of biocompatible and biodegradable materials with desired optical, mechanical, chemical, and biological properties is required to enable clinically relevant biophotonic devices for translating in vitro optical techniques into in situ and in vivo use. This technological trend propels the development of natural and synthetic polymeric biomaterials to replace traditional brittle, nondegradable silica glass based optical materials. In this review, we present an overview of the advances in polymeric optical material development, optical device design and fabrication techniques, and the accompanying applications to imaging, sensing and phototherapy.

Improving Detection of Rapid Cystic Fibrosis Disease Progression-Early Translation of a Predictive Algorithm Into a Point-of-Care Tool

The clinical course of cystic fibrosis (CF) lung disease is marked by acute drops of lung function, defined clinically as rapid decline. As such, lung function is monitored routinely through pulmonary function testing, producing hundreds of measurements over the lifespan of an individual patient. Point-of-care technologies aimed at improving detection of rapid decline have been limited. Our aim in this early translational study is to develop and translate a predictive algorithm into a prototype prognostic tool for improved detection of rapid decline. The predictive algorithm was developed, validated and checked for 6-month, 1-year, and 2-year forecast accuracies using data on demographic and clinical characteristics from 30 879 patients aged 6 years and older who were followed in the U.S. Cystic Fibrosis Foundation Patient Registry from 2003 to 2015. Predictions of rapid decline based on the algorithm were compared to a detection algorithm currently being used at a CF center with 212 patients who received care between 2012-2017. The algorithm was translated into a prototype web application using RShiny, which resulted from an iterative development and refinement based on clinician feedback. The study showed that the algorithm had excellent predictive accuracy and earlier detection of rapid decline, compared to the current approach, and yielded a prototype platform with the potential to serve as a viable point-of-care tool. Future work includes implementation of this clinical prototype, which will be evaluated prospectively under real-world settings, with the aim of improving the pre-visit planning process for CF point of care. Likely extensions to other point-of-care settings are discussed.

Citrate-Based Fluorescent Biomaterials

Fluorescence imaging has emerged as a promising technique for monitoring and assessing various biologically relevant species in cells and organisms, driving the demand for effective fluorescent agents with good biocompatibility and high fluorescence performance. However, traditional fluorescent agents, such as quantum dots (QDs) and organic dyes, either suffer from toxicity concerns or poor fluorescence performance (e.g., low photobleaching-resistance). In this regard, citrate-based fluorescent biomaterials, which are synthesized from the natural and biocompatible precursor of citric acid (CA), have become competitive alternatives for fluorescence imaging owing to their biocompatibility, cost effectiveness, straightforward synthetic routes, flexible designability, as well as strong fluorescence with adjustable excitation/emission wavelengths. Accordingly, numerous citrate-based biomaterials, including carbon dots (CDs), biodegradable photoluminescent polymers (BPLPs), and small molecular fluorophores, have been developed and researched in the past few decades. This review discusses recent progress in the research and development of citrate-based fluorescent materials with emphasis on their design and synthesis considerations, material properties, fluorescence properties and mechanisms, as well as biomedical applications. It is expected that this review will provide an insightful discussion on the citrate-based fluorescent biomaterials, and lead to innovations for the next generation of fluorescent biomaterials and fluorescence-based biomedical technology.

Development of Citrate-based Dual-Imaging Enabled Biodegradable Electroactive Polymers

Increasing occurrences of degenerative diseases, defective tissues and severe cancers heighten the importance of advanced biomedical treatments, which in turn enhance the need for improved biomaterials with versatile theranostic functionalities yet using minimal design complexity. Leveraging the advantages of citrate chemistry, we developed a multifunctional citrate-based biomaterial platform with both imaging and therapeutic capabilities utilizing a facile and efficient one-pot synthesis. The resulting aniline tetramer doped biodegradable photoluminescent polymers (BPLPATs) not only possess programmable degradation profiles (<1 to >6 months) and mechanical strengths (~20 MPa to > 400 MPa), but also present a combination of intrinsic fluorescence, photoacoustic (PA) and electrical conductivity properties. BPLPAT nanoparticles are able to label cells for fluorescence imaging and perform deep tissue detection with PA imaging. Coupled with significant photothermal performance, BPLPAT nanoparticles demonstrate great potential for thermal treatment and in vivo real-time detection of cancers. Our results on BPLPAT scaffolds demonstrate three-dimensional (3D) high-spatial-resolution deep tissue PA imaging (23 mm), as well as promote growth and differentiation of PC-12 nerve cells. We envision that the biodegradable dual-imaging-enabled electroactive citrate-based biomaterial platform will expand the currently available theranostic material systems and open new avenues for diversified biomedical and biological applications via the demonstrated multi-functionality.

Polymeric chemosensor for the detection and quantification of chloride in human sweat. Application to the diagnosis of cystic fibrosis

We have developed a new extremely hydrophilic polymeric film suitable for the detection and quantification of chloride in human sweat directly on the skin. The film, or membrane, has chemically anchored 6-methoxyquinoline groups as chloride responsive fluorescent motifs. We have prepared the sensory material from a standard vinyl copolymer, by a convenient and easy solid-phase reaction. The sensory material has a water swelling percentage of 700%, facilitating an immediate detection of chloride, is reusable for at least 6 cycles and can be handled without care by unskilled persons. The initially high fluorescence of the material decreases in the presence of chloride, allowing the quantification of chloride concentration by using the colour definition of a digital picture or a fluorimeter. The suitability of the material to perform quantitative chloride analysis of human sweat by putting it in contact with the skin offers promise for its application in the sweat test used for the diagnosis of cystic fibrosis (CF).

Citrate chemistry and biology for biomaterials design

Leveraging the multifunctional nature of citrate in chemistry and inspired by its important role in biological tissues, a class of highly versatile and functional citrate-based materials (CBBs) has been developed via facile and cost-effective polycondensation. CBBs exhibiting tunable mechanical properties and degradation rates, together with excellent biocompatibility and processability, have been successfully applied in vitro and in vivo for applications ranging from soft to hard tissue regeneration, as well as for nanomedicine designs. We summarize in the review, chemistry considerations for CBBs design to tune polymer properties and to introduce functionality with a focus on the most recent advances, biological functions of citrate in native tissues with the new notion of degradation products as cell modulator highlighted, and the applications of CBBs in wound healing, nanomedicine, orthopedic, cardiovascular, nerve and bladder tissue engineering. Given the expansive evidence for citrate's potential in biology and biomaterial science outlined in this review, it is expected that citrate based materials will continue to play an important role in regenerative engineering.

Smartphone Spectrometers

Smartphones are playing an increasing role in the sciences, owing to the ubiquitous proliferation of these devices, their relatively low cost, increasing processing power and their suitability for integrated data acquisition and processing in a 'lab in a phone' capacity. There is furthermore the potential to deploy these units as nodes within Internet of Things architectures, enabling massive networked data capture. Hitherto, considerable attention has been focused on imaging applications of these devices. However, within just the last few years, another possibility has emerged: to use smartphones as a means of capturing spectra, mostly by coupling various classes of fore-optics to these units with data capture achieved using the smartphone camera. These highly novel approaches have the potential to become widely adopted across a broad range of scientific e.g., biomedical, chemical and agricultural application areas. In this review, we detail the exciting recent development of smartphone spectrometer hardware, in addition to covering applications to which these units have been deployed, hitherto. The paper also points forward to the potentially highly influential impacts that such units could have on the sciences in the coming decades.

Early Detection of Rapid Cystic Fibrosis Disease Progression Tailored to Point of Care: A Proof-of-Principle Study

Slowing cystic fibrosis (CF) lung disease progression is crucial to survival, but point-of-care technologies aimed at early detection-and possibly prevention-of rapid lung function decline are limited. This proof-of-principle study leverages a rich national patient registry and follow-up data on a local CF cohort to build an algorithm and prototype prognostic tool aimed at early detection of rapid lung function decline. The algorithm was developed using a novel longitudinal analysis of lung function (measured as forced expiratory volume in 1 s of % predicted, FEV1). Covariates included clinical and demographic characteristics selected from the registry based on information criterion. Preliminary assessment of algorithm performance suggested excellent predictive accuracy and earlier detection of rapid decline than standard of care being applied at a local center. Graphical displays were presented and evaluated for clinical utility. Predictions from the algorithms and chosen graphical displays were translated into a prototype web application using RShiny and underwent iterative development based on clinician feedback. This paper suggests that the algorithm and its translation could offer a means for earlier detection and treatment of rapid decline, providing clinicians with a viable point-of-care technology to intervene prior to irreversible lung damage.

Smartphone based optical spectrometer for diffusive reflectance spectroscopic measurement of hemoglobin

We report a miniature, visible to near infrared G-Fresnel spectrometer that contains a complete spectrograph system, including the detection hardware and connects with a smartphone through a microUSB port for operational control. The smartphone spectrometer is able to achieve a resolution of ~5 nm in a wavelength range from 400 nm to 1000 nm. We further developed a diffuse reflectance spectroscopy system using the smartphone spectrometer and demonstrated the capability of hemoglobin measurement. Proof of concept studies of tissue phantoms yielded a mean error of 9.2% on hemoglobin concentration measurement, comparable to that obtained with a commercial benchtop spectrometer. The smartphone G-Fresnel spectrometer and the diffuse reflectance spectroscopy system can potentially enable new point-of-care opportunities, such as cancer screening.

Point-of-care testing for streptomycin based on aptamer recognizing and digital image colorimetry by smartphone

The rapid detection of antibiotic residual in everyday life is very important for food safety. In order to realize the on-site and visual detection of antibiotic, a POCT method was established by using digital image colorimetry based on smartphone. Streptomycin was taken as the analyte model of antibiotics, streptomycin aptamer preferentially recognized analyte, and the excess aptamer hybridized with the complementary DNA to form the dsDNA. SYBR Green I combined with the dsDNA and then emitted obvious green fluorescence, thus the fluorescence intensity decreased with the increasing of streptomycin concentration. Then a smartphone-based device was constructed as the fluorescence readout. The smartphone camera acquired the images of the fluorescence derived from the samples, and the Touch Color APP installed in smartphone read out the RGB values of the images. There was a linear relationship between the G values and the streptomycin concentrations in the range of 0.1-100µM. The detection limit was 94nM, which was lower than the maximum residue limit defined by World Health Organization. The POCT method was applied for determining streptomycin in chicken and milk samples with recoveries in 94.1-110%. This method had the advantages of good selectivity, simple operation and on-site visualization.