Broccoli-shaped biosensor hierarchy for electrochemical screening of noradrenaline in living cells

Magnetized cubic zinc MOFs for efficient removal of hazardous cationic and anionic dyes in aqueous solutions

A significant amount of dye runoff and aqueous waste are released from the manufacturing process of dyes with intense and permanent colors, which are undesirable from a cultural and ecological aspect. In this paper, we present a green, simple, low-effort, and energy-efficient method of creating magnetized cubic Zn-MOFs for the adsorption and elimination of various organic dyes. Magnetic iron oxide materials with a hierarchical structure were loaded and doped into cubic zinc metal-organic frameworks (MDLZ). High magnetic characteristics, chemical stability, minimal toxicity, and ease of removing various dyes from aqueous effluents are all exhibited by the developed MDLZ adsorbent. To assess MDLZ's capacity to adsorb organic dyes from an aqueous solution, organic dyes such as Crystal Violet (CV), Neutral Red (NR), and Congo Red (CR) were used as model materials. Many adsorption factors were examined, including temperature, pH, contact time, initial concentration, and adsorbent dosage. Under optimal elimination circumstances, MDLZ was utilized to evaluate the kinetic, thermodynamic, and isotherm models for the adsorption of CR, NR, and CV dyes. The adsorption capacity (q m) of the MDLZ adsorbent at 25 °C was 39.37 mg g-1 for CV, 239.81 mg g-1 for CR, and 321.54 mg g-1 for NR, which is significantly higher than those of other adsorbents reported. The magnetized nanocubes' large surface area and uniform micropores enabled them to eliminate a large number of organic dyes from wastewater effectively, and their strong adsorption capability persisted even after four reuse cycles. The microporous MLDZ adsorbent offers a simple and effective method for handling industrial effluents and filtration of water.

Ultrasensitive Visual Tracking of Toxic Cyanide Ions in Biological Samples Using Biocompatible Metal-Organic Frameworks Architectures

The extraordinary accumulation of cyanide ions within biological cells is a severe health risk. Detecting and tracking toxic cyanide ions within these cells by simple and ultrasensitive methodologies are of immense curiosity. Here, continuous tracking of ultimate levels of CN--ions in HeLa cells was reported employing biocompatible branching molecular architectures (BMAs). These BMAs were engineered by decorating colorant-laden dendritic branch within and around the molecular building hollows of the geode-shelled nanorods of organic-inorganic Al-frameworks. Batch-contact methods were utilized to assess the potential of hollow-nest architecture for inhibition/evaluation of toxicant CN--ions within HeLa cells. The nanorod BMAs revealed significant potential capabilities in monitoring and tracking of CN- ions (88 parts per trillion) in biological trials within seconds. These results demonstrated sufficient evidence for the compatibility of BMAs during HeLa cell exposure. Under specific conditions, the BMAs were utilized for in-vitro fluorescence tracking/sensing of CN- in HeLa cells. The cliff swallow nest with massive mouths may have the potential to reduce the health hazards associated with toxicant exposure in biological cells.

Sustainable synthesis of multifunctional nanomaterials from rice wastes: a comprehensive review

More than 60% of India's population relies on agriculture as their primary source of income, making it the nation's most important economic sector. Rice husk (often abbreviated as RH) is one of the most typical by-products of agricultural production. Every five tonnes of rice that is harvested results in the production of one tonne of husk. The concept of recycling and reusing waste from agricultural production has received interest from a variety of environmental and industrial perspectives. A wide variety of nanomaterials, including nano-zeolite, nanocarbon, and nano-silica, have been discovered in agro-waste. From rice cultivation to the finished product, there was a by-product consisting of husk that comprised 20% of the overall weight, or RH. The percentage of silica in RH ash ranges from 60 to 40%, with the remaining percentage consisting of various minerals. As a direct consequence of this, several distinct approaches to generating and extracting nanomaterial from rice husk have been developed. Because it contains a significant amount of cellulose and lignin, RH is an excellent and economical source of carbon precursor. The goal of this chapter is to produce carbon-based nanomaterials from RH.

Honeycomb-like nickel oxide-reduced graphene oxide based sensor for the electrochemical tracking of norepinephrine in neuronal cells

Highly sensitive and specific detection and monitoring of trace norepinephrine (NE) in biological fluids and neuronal cell lines is essential for the investigation of pathogenesis of certain neurological diseases. Herein, we constructed a novel electrochemical sensor for real-time monitoring of NE released by PC12 cells based on glassy carbon electrode (GCE) modified with honeycomb-like nickel oxide (NiO)-reduced graphene oxide (RGO) nanocomposite. The synthesized NiO, RGO and the NiO-RGO nanocomposite were characterized using X-ray diffraction spectrogram (XRD), Raman spectroscopy and scanning electron microscopy (SEM). The porous three-dimensional honeycomb-like structure of NiO and high charge transfer kinetics of RGO endowed the nanocomposite with excellent electrocatalytic activity, large surface area and good conductivity. The developed sensor exhibited superior sensitivity and specificity towards NE in a wide linear range from 20 nM to 14 μM and 14 μM-80 μM, with a low detection limit of 5 nM. The performances of the sensor in terms of excellent biocompatibility and high sensitivity allow it to be successfully employed in the tracking of NE release from PC12 cells under the stimulation of K⁺, providing an effective strategy for the real-time monitoring of cellular NE.

Ultrasensitive PEC cytosensor for breast cancer cells detection and inhibitor screening based on plum-branched CdS/Bi2S3 heterostructures

Breast cancer is the most common malignant tumor in women, which seriously threatens the life and health of patients. Therefore, facile and sensitive detection of human breast cancer cells is crucial for cancer diagnosis. In this work, plum-branched CdS/Bi₂S₃ heterostructures (CdS/Bi₂S₃ HSs) were synthesized under hydrothermal condition, whose photoelectrochemical (PEC) property and biocompatibility were scrutinously investigated. In parallel, a signal amplification strategy was designed based on immune recognition between epidermal growth factor receptor (EGFR) overexpressed on membrane of breast cancer cells MDA-MB-231 and its aptamer. Integration of the above together, a highly sensitive PEC cytosensor was developed for analysis of target MDA-MB-231 cells, exhibiting a wider linear range of 1 × 10² ∼ 3 × 10⁵ cells mL^-1 with a limit of detection (LOD) down to 6 cells mL^-1 (S/N = 3). Further, the biosensor was explored for anticancer drug (e.g., dacomitinib) screening by monitoring the variations in the PEC signals of the expressed EGFR upon drug stimulation. The obtained CdS/Bi₂S₃ HSs are identified as promising and feasible photoactive material for determination of cancer cells and drug screening in clinic and related research.

Sensitive detection of noradrenaline in human whole blood based on Au nanoparticles embedded vertically-ordered silica nanochannels modified pre-activated glassy carbon electrodes

Sensitive determination of noradrenaline (NE), the pain-related neurotransmitters and hormone, in complex whole blood is of great significance. In this work, an electrochemical sensor was simply constructed on the pre-activated glassy carbon electrode (p-GCE) modified with vertically-ordered silica nanochannels thin film bearing amine groups (NH₂-VMSF) and in-situ deposited Au nanoparticles (AuNPs). The simple and green electrochemical polarization was employed to pre-activate GCE to realize the stable binding of NH₂-VMSF on the surface of electrode without the use of any adhesive layer. NH₂-VMSF was conveniently and rapidly grown on p-GCE by electrochemically assisted self-assembly (EASA). With amine group as the anchor sites, AuNPs were in-situ electrochemically deposited on the nanochannels to improve the electrochemical signals of NE. Owing to signal amplification from gold nanoparticles, the fabricated AuNPs@NH₂-VMSF/p-GCE sensor can achieve electrochemical detection of NE ranged from 50 nM to 2 μM and from 2 μM to 50 μM with a low limit of detection (LOD) of 10 nM. The constructed sensor exhibited high selectivity and can be easily regenerated and reused. Owing to the anti-fouling ability of nanochannel array, direct electroanalysis of NE in human whole blood was also realized.

Non-enzymatic electrochemical sensing of dopamine from COVID-19 quarantine person

The worldwide outbreak of COVID-19 pandemic, is not only a great threat to the victim life but it is leaving invisible devastating negative affect on mental health of quarantined individual because of isolation, depression, bereavement, and loss of income. Therefore, the precise monitoring catecholamine neurotransmitters specifically of dopamine (DA) is of great importance to assess the mental health. Thus, herein we have synthesized Co-based zeolitic imidazolate framework (ZIF-67) through solvothermal method for precise monitoring of DA. To facilitate the fast transportation of ions, highly conductive polymer, poly(3,4-ethylenedioxythiophene; PEDOT) has been integrated on the surface of ZIF-67 which not only provides the smooth pathway for ions/electrons transportation but also saves the electrode from pulverization. The fabricated ZIF-67/PEDOT electrode shows a significant sensing performance towards DA detection in terms of short diffusion pathways by expositing more active sites, over good linear range (15-240 μM) and a low detection limit of (0.04 μM) even in the coexistence of the potentially interfering molecules. The developed ZIF-67/PEDOT sensor was successfully employed for sensitive and selective monitoring of DA from COVID-19 quarantined person blood, thus suggesting reliability of the developed electrode.

PC-12 Cell Line as a Neuronal Cell Model for Biosensing Applications

PC-12 cells have been widely used as a neuronal line study model in many biosensing devices, mainly due to the neurogenic characteristics acquired after differentiation, such as high level of secreted neurotransmitter, neuron morphology characterized by neurite outgrowth, and expression of ion and neurotransmitter receptors. For understanding the pathophysiology processes involved in brain disorders, PC-12 cell line is extensively assessed in neuroscience research, including studies on neurotoxicity, neuroprotection, or neurosecretion. Various analytical technologies have been developed to investigate physicochemical processes and the biosensors based on optical and electrochemical techniques, among others, have been at the forefront of this development. This article summarizes the application of different biosensors in PC-12 cell cultures and presents the modern approaches employed in neuronal networks biosensing.

Vancomycin-Loaded Furriness Amino Magnetic Nanospheres for Rapid Detection of Gram-Positive Water Bacterial Contamination

Bacterial pathogens pose high threat to public health worldwide. Different types of nanomaterials have been synthesized for the rapid detection and elimination of pathogens from environmental samples. However, the selectivity of these materials remains challenging, because target bacterial pathogens commonly exist in complex samples at ultralow concentrations. In this study, we fabricated novel furry amino magnetic poly-L-ornithine (PLO)/amine-poly(ethylene glycol) (PEG)-COOH/vancomycin (VCM) (AM-PPV) nanospheres with high-loading VCM for vehicle tracking and the highly efficient capture of pathogens. The magnetic core was coated with organosilica and functionalized with cilia. The core consisted of PEG/PLO loaded with VCM conjugated to Gram-positive bacterial cell membranes, forming hydrogen bonds with terminal peptides. The characterization of AM-PPV nanospheres revealed an average particle size of 56 nm. The field-emission scanning electron microscopy (FE-SEM) micrographs showed well-controlled spherical AM-PPV nanospheres with an average size of 56 nm. The nanospheres were relatively rough and contained an additional 12.4 nm hydrodynamic layer of PLO/PEG/VCM, which provided additional stability in the suspension. The furry AM-PPV nanospheres exhibited a significant capture efficiency (>90%) and a high selectivity for detecting Bacillus cereus (employed as a model for Gram-positive bacteria) within 15 min, even in the presence of other biocompatible pathogens. Moreover, AM-PPV nanospheres rapidly and accurately detected B. cereus at levels less than 10 CFU/mL. The furry nano-design can potentially satisfy the increasing demand for the rapid and sensitive detection of pathogens in clinical and environmental samples.

Melamine-derived N-rich C-entrapped Au nanoparticles for sensitive and selective monitoring of dopamine in blood samples

Several neurological disorders, including Parkinson's disease, schizophrenia, human immunodeficiency virus infection, and restless leg syndrome, majorly result from disruption in the dopamine (DA) level. Thus, useful information about the treatment and prevention of various genetic majorly mental health problems can be obtained through precise and real-time monitoring of DA. Herein, we report the fabrication of novel N-rich carbon-coated Au nanoparticles (NC@Au-NPs) by deriving from melamine-crosslinked citrate-stabilized Au NPs. NC@Au-NPs offer fast electro-oxidation efficacy towards DA, because of strong electrostatic attraction between negatively charged NC@Au-NPs and positively charged DA. The catalytic efficacy and shelf life of the designed system were further boosted by applying a mixture of polydopamine (PDA) and benzimidazolium-1-acetate ionic liquid (IL) as a sandwich between the working electrode surface (graphitic pencil electrode: GPE) and the designed nanohybrid NC@Au-NPs as a redox mediator. The results indicate that the designed novel NC@Au/PDA–IL/GPE exhibits excellent sensitivity, selectivity, and reproducibility over a wide linear range (50–1000 nm) and a low detection limit of 0.002 μM ± 0.001 as well. The developed sensor was successfully applied to monitor DA in the blood of COVID-19 quarantined patients and pharmaceutical samples with high accuracy, thus suggesting a powerful tool for the diagnosis of mental problems.

Several neurological disorders, including Parkinson's disease, schizophrenia, human immunodeficiency virus infection, and restless leg syndrome, majorly result from disruption in the dopamine (DA) level.

Self-assembly encapsulation of vanadium tetrasulfide into nitrogen doped biomass-derived porous carbon as a high performance electrochemical sensor for xanthine determination

A novel VS4@N-BPC platform was constructed, and demonstrated a high electrochemical response to xanthine due to the excellent synergistic effect.

Hierarchical engineering of Mn2O3/carbon nanostructured electrodes for sensitive screening of acetylcholine in biological samples

Enzymeless electrochemical sensors have received considerable interest for the direct, sensitive, and selective monitoring of biomolecules in a complex biological environment.

Chipset Nanosensor Based on N‐Doped Carbon Nanobuds for Selective Screening of Epinephrine in Human Samples

Chipset nanosensor design and fabrication are important for healthcare research and development. Herein, a functionalized chipset nanosensor is designed to monitor neurotransmitters (i.e., epinephrine (EP)) in human fluids. An interdigitated electrode array (IDA) is functionalized by N‐doped carbon nanobud (N‐CNB) and N‐doped carbon nanostructure (N‐CNS). The surface morphology of N‐CNB shows the formation of nanotubular‐like branches on sheets and micrometer‐size tubes. The N‐CNS design consists of the formation of aggregated sheets and particles in nanometer size. The irregular shape formation provides surface heterogeneity and numerous free spaces between the stacked nanostructures. N‐atoms ascertain highly active N‐CNS with multifunctional active centers, electron‐rich charged surface, and short distance pathway. The N‐CNB/IDA exhibits the best performance for EP signaling with high sensitivity and selectivity. The N‐CNB/IDA sensing performance for EP detection indicates the successful design of a highly selective and sensitive assay with low detection limit of 0.011 × 10−6 m and a broad linear range of 0.5 × 10−6 to 3 × 10−6 m. The N‐CNB/IDA exhibits a high degree of accuracy and reproducibility with RSD of 2.7% and 3.9%, respectively. Therefore, the chipset nanosensor of N‐CNB/IDA can be used for on‐site monitoring of EP in human serum samples and further used in daily monitoring of neuronal disorders.

Enzymeless copper microspheres@carbon sensor design for sensitive and selective acetylcholine screening in human serum

Follow up of neuronal disorders, such as Alzheimer's and Parkinson's diseases using simple, sensitive, and selective assays is urgently needed in clinical and research investigation. Here, we designed a sensitive and selective enzymeless electrochemical acetylcholine sensor that can be used in human fluid samples. The designed electrode consisted of a micro spherical construction of Cu-metal decorated by a thin layer of carbon (CuMS@C). A simple and one-pot synthesis approach was used for Cu-metal controller formation with a spherical like structures. The spherical like structure was formed with rough outer surface texture, circular build up, homogeneous formation, micrometric spheres size (0.5 -1 µm), and internal hollow structure. The formation of a thin layer of carbon materials on the surface of CuMS sustained the catalytic activity of Cu atoms and enriched negatively charge of the surface. CuMS@C acted as a highly active mediator surface that consisted of Cu metal as a highly active catalyst and carbons as protecting, charge transport, and attractive surface. Therefore, the CuMS@C surface morphology and composition played a key role in various aspects such as facilitated ACh diffusion/loading, increased the interface surface area, and enhanced the catalytic activity. The CuMS@C acted as an electroactive catalyst for ACh electrooxidation and current production, due to the losing of two electrons. The fabricated CuMS@C could be a highly sensitive and selective enzymeless sensor for detecting ACh with a detection limit of 0.1 µM and a wide linear range of 0.01 - 0.8 mM. The designed ACh sensor assay based on CuMS@C exhibited fast sensing property as well as sensitivity, selectivity, stability, and reusability for detecting ACh in human serum samples. This work presents the design of a highly active electrode surface for direct detection of ACh and further clinical investigation of ACh levels.

Dual-emission 3D supramolecular framework hydrogel beads: highly selective detection of antibiotics and mechanism research

Ratiometric fluorescent probes based on coordination polymers (CPs) have been widely applied in optical applications. Therefore, it is very important to develop a dual-emitting gel material based on coordination polymers for specific recognition of molecules. Cu-atda (H₂atda = 3,3'-(4-amino-1,2,4-triazol-3,5-diyl) dibenzoic acid) is synthesized with a porous structure and a large number of amino sites exposed on the surface, which can be regarded as a carrier for fluorescent molecules and well disperse in the SA hydrogel network. A dual-emission Eu³⁺ functionalized CP hydrogel bead (9A/Cu-atda@Eu3+/SA, 9A = 9-anthraldehyde and SA = sodium alginate) is successfully prepared, which presents ratiometric fluorescence detection of flumequine with a low detection limit (48 nM) and high selectivity. Furthermore, it also displays an excellent fluorescence quenching effect on nitrofuran antibiotics, exhibiting a dual functional performance. In addition, the fluorescence response mechanisms of flumequine and nitrofuran antibiotics are discussed in depth. As a portable material, visualization 9A/Cu-atda@Eu3+/SA beads provide an extensive and convenient application prospect for real-time monitoring of antibiotics in the water environment.

Optical glucose biosensor built-in disposable strips and wearable electronic devices

On-demand screening, real-time monitoring and rapid diagnosis of ubiquitous diseases, such as diabetes, at early stages are indispensable in personalised treatment. Emerging impacts of nano/microscale materials on optical and portable biosensor strips and devices have become increasingly important in the remarkable development of sensitive visualisation (i.e. visible inspection by the human eye) assays, low-cost analyses and personalised home testing of patients with diabetes. With the increasing public attention regarding the self-monitoring of diabetes, the development of visual readout, easy-to-use and wearable biosensors has gained considerable interest. Our comprehensive review bridges the practical assessment gap between optical bio-visualisation assays, disposable test strips, sensor array designs and full integration into flexible skin-based or contact lens devices with the on-site wireless signal transmission of glucose detection in physiological fluids. To date, the fully modulated integration of nano/microscale optical biosensors into wearable electronic devices, such as smartphones, is critical to prolong periods of indoor and outdoor clinical diagnostics. Focus should be given to the improvements of invasive, wireless and portable sensing technologies to improve the applicability and reliability of screen display, continuous monitoring, dynamic data visualisation, online acquisition and self and in-home healthcare management of patients with diabetes.

Microporous P-doped carbon spheres sensory electrode for voltammetry and amperometry adrenaline screening in human fluids

An electrochemical sensor-based phosphorus-doped microporous carbon spheroidal structures (P-MCSs) has been designed for selective adrenaline (ADR) signaling in human blood serum. The P-MCS electrode sensor is built with heterogeneous surface alignments including multiple porous sizes with open holes and meso-/macro-grooves, rough surface curvatures, and integral morphology with interconnected and conjugated microspheres. In addition, the P atom-doped graphitic carbon forms highly active centers, increases charge mobility on the electrode surface, creates abundant active centers with facile functionalization, and induces binding to ADR molecules. The designed P-MCS electrode exhibits ultrasensitive monitoring of ADR with a low detection limit of 0.002 μM and high sensitivity of 4330 μA μM^-1 cm^-2. In addition, two electrochemical techniques, namely, square wave voltammetry (SWV) and chronoamperometry (CA), were used; these techniques achieve high stability, fast response, and a wide linear range from 0.01 to 6 μM. The sensing assays based on P-MCSs provide evidence of the formation of active interfacial surface-to-ADR binding sites, high electron diffusion, and heavy target loads along with/without a plane of spheroids. Thus, P-MCSs can be used for the routine monitoring of ADR in human blood serum, providing a fast response, and requiring highly economical materials at extremely low concentrations. Electrode surface modulation based on P-doped carbon spheres (P-MCS) exhibits high electrochemical activity with fast charge transport, multi-diffusible active centers, high loading of ADR, and facile molecular/electron diffusion at its surface. The P-MCS sensitively and selectively detects the ADR in human fluids and can be used for clinical investigation of some neuronal diseases such as Alzheimer diseases.

Influence of hollow sphere surface heterogeneity and geometry of N-doped carbon on sensitive monitoring of acetaminophen in human fluids and pharmaceutical products

A sensitive and selective acetaminophen sensor assay was designed based on N-HCCS. The surface morphology, and composition of open hollow conjugated spheres of N-HCCS resulted in facile AC diffusion/loading and electrocatalytic oxidation.

Mesoporous nanosensors for sensitive monitoring and removal of copper ions in wastewater samples

FHNS nanosensors allow for the ultra-sensitive monitoring and capture of Cu²⁺ ions with a low detection limit and high adsorption capacity.

Non-metal sensory electrode design and protocol of DNA-nucleobases in living cells exposed to oxidative stresses

Sensory protocols for evaluation of DNA distortion due to exposure to various harmful chemicals and environments in living cells are needed for research and clinical investigations. Here, a design of non-metal sensory (NMS) electrode was built by using boron-doped carbon spherules for detection of DNA nucleobases, namely, guanine (Gu), adenine (Ad), and thymine (Th) in living cells. The key-electrode based nanoscale NMS structures lead to voids with a facile diffusion, and strong binding events of the DNA nucleobases. Furthermore, the NMS geometric structures would significantly create electrode surfaces with numerous centrally active sites, curvature topographies, and anisotropic spherules. The NMS shows potential as sensitive protocol for DNA-nucleobases in living cells exposed to oxidative stresses. In one-step signaling assay, NMS shows high signaling transduction of Gu-, Ad-, and Th-DNA nucleobases targets with ultra-sensitive and low detection limits of 3.0, 0.36, and 0.34 nM, respectively, and a wide linear range of up to 1 μM. The NMS design and protocol show evidence of the role of surface construction features and B-atoms incorporated into the graphitic carbon network for creating abundant active sites with facile electron diffusion and heavily target loads along with within-/out-plane circular spheres. Indeed NMS, with spherule-rich interstitial surfaces can be used for sensitive and selective evaluation of damaged-DNA to various dysfunctional metabolism in the human body.

CuO Hollow Cubic Caves Wrapped with Biogenic N-Rich Graphitic C for Simultaneous Monitoring of Uric Acid and Xanthine

Herein, we synthesized hollow cubic caves of CuO (HC) and wrapped it with N-rich graphitic C (NC), derived from a novel biogenic mixture composed of dopamine (DA) and purine. The synthesized NC wrapped HC (NC@HC) sensor shows enhanced electrocatalytic efficacy compared to unwrapped CuO with shapes including HC, sponge (SP), cabbage (CB), and solid icy cubes (SC). The shape and composition of synthesized materials were confirmed through field-emission scanning electron microscopy (FE-SEM), X-ray diffraction (XRD), Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS), whereas interfacial surface energy was calculated through contact angle measurement. The designed NC@HC sensor shows a remarkable response toward the simultaneous detection of uric acid (UA) and xanthine (Xn) with detection limits of 0.017 ± 0.001 (S/N of 3) and 0.004 ± 0.001 μM (S/N of 3), respectively. In addition, this platform was successfully applied to monitor UA from the gout patient serum. To the best of our knowledge, this is the first report on using such novel NC@HC materials for the simultaneous monitoring of UA and Xn.

Mesoscopic open-eye core-shell spheroid carved anode/cathode electrodes for fully reversible and dynamic lithium-ion battery models

We report on the key influence of mesoscopic super-open-eye core-shell spheroids of TiO₂- and LiFePO₄-wrapped nanocarbon carved anode/cathode electrodes with uniform interior accommodation/storage pockets for the creation of fully reversible and dynamic Li-ion power battery (LIB) models. The mesoscopic core-shell anode/cathode electrodes provide potential half- and full-cell LIB-CR2032 configuration designs, and large-scale pouch models. In these variable mesoscopic LIB models, the broad-free-access and large-open-eye like gate-in-transport surfaces featured electrodes are key factors of built-in LIBs with excellent charge/discharge capacity, energy density performances, and outstanding cycling stability. Mesoscopic open-eye spheroid full-LIB-CR2032 configuration models retain 77.8% of the 1^st cycle discharge specific capacity of 168.68 mA h g^-1 after multiple cycling (i.e., 1^st to 2000^th cycles), efficient coulombic performance of approximately 99.6% at 0.1C, and high specific energy density battery of approximately 165.66 W h kg^-1 at 0.1C. Furthermore, we have built a dynamic, super-open-mesoeye pouch LIB model using dense packing sets that are technically significant to meet the tradeoff requirements and long-term driving range of electric vehicles (EVs). The full-pouch package LIB models retain a powerful gate-in-transport system for heavy loaded electron/Li⁺ ion storage, diffusion, and truck movement through open-ended out/in and then up/downward eye circular/curvy folds, thereby leading to substantial durability, and remarkable electrochemical performances even after long-life charge/discharge cycling.

Carbonaceous Nanomaterials Employed in the Development of Electrochemical Sensors Based on Screen-Printing Technique—A Review

This paper aims to revise research on carbonaceous nanomaterials used in developing sensors. In general, nanomaterials are known to be useful in developing high-performance sensors due to their unique physical and chemical properties. Thus, descriptions were made for various structural features, properties, and manner of functionalization of carbon-based nanomaterials used in electrochemical sensors. Of the commonly used technologies in manufacturing electrochemical sensors, the screen-printing technique was described, highlighting the advantages of this type of device. In addition, an analysis was performed in point of the various applications of carbon-based nanomaterial sensors to detect analytes of interest in different sample types.

Selective Cl-Decoration on Nanocrystal Facets of Hematite for High-Efficiency Catalytic Oxidation of Cyclohexane: Identification of the Newly Formed Cl-O as Active Sites

Understanding the structure-reactivity relationship at the atomic scale is of great theoretical importance for rational design of highly active catalysts, which has long been a central concern in catalysis communities and interface science. Herein, we developed a high-efficiency catalyst for catalytic oxidation of C₆H₁₂ by poststructural decoration on well-defined single-crystal facets of hematite. Especially for Cl-decorated {012} facets, the conversion and KA oil selectivity are improved about 3.4 times and 2 times, respectively. A better catalytic performance of the newly formed active site is derived from the charge difference between Cl and the neighboring outmost O atoms, which is affected by the geometric and electronic structures of the original catalyst surface. Based on the experimental results and the theoretical analysis, we concluded that the contribution of various O terminations to Cl-decoration follows the order O(I) > O(III) > O(II). Cl-decorated {001} facets show the highest intrinsic activity, whereas Cl-decorated {012} facets show the best catalytic performance because of their more active sites for Cl-decoration.

Sensitive electrochemical sensing platform for selective determination of dopamine based on amorphous cobalt hydroxide/polyaniline nanofibers composites

In this study, amorphous cobalt hydroxide/polyaniline nanofibers (Co(OH)₂/PANINF) composites were successfully prepared. The formation of amorphous Co(OH)₂ with irregular surface structure was confirmed by x-ray diffraction, scanning electron microscopy, and selected-area electron diffraction. The non-enzymatic electrochemical sensor for the selective and sensitive determination of dopamine (DA) has been constructed by using Co(OH)₂/PANINF composites modified glassy carbon electrode (Co(OH)₂/PANINF/GCE), which exhibited excellent electrocatalytic activity toward DA, in a large part owing to the advantages of large surface area of amorphous Co(OH)₂ and the synergetic effect between Co(OH)₂ and PANINF. The electrochemical kinetics reveal that the DA oxidation involves two electrons and two protons in a quasi-reversible electrode reaction. Differential pulse voltammetry (DPV) studies show remarkable sensing performance for the determination of DA, with a low detection limit of 0.03 μM, and a wide linear range from 0.1 to 200 μM. From a broader perspective, the present study demonstrates that Co(OH)₂/PANINF composites would be promising supporting materials for novel sensing platforms.

Architecting of a biodevice based on a screen-printed carbon electrode modified with the NiONP nanolayer and aptamer in BCM-7 detection

In this study, an ultrasensitive and robust biodevice implemented on a screen-printed carbon electrode (SPCE) surface is introduced. The β-casomorphin-7 (BCM-7) peptide as an early warning sign of autism disorder is distinguished in this system. The SPCE surface was directly electrodeposited with a nanolayer of the nickel oxide nanoparticles (NiONP). In next step, an Apt sequence as a capture of the BCM-7 was strongly attached on this surface. The embedded sensing interface offered some admirable characterizes to detect the BCM-7. The obtained DPV signals were reversely proportional to the concentrations of the BCM-7 through a stable binding reaction in two working linear ranges from 0.5 × 10^-9-1.5 μmol l-. Also, an unrivaled limit of detection (LOD) value of 166.6 aM was achieved that is so superior by other reported methods in the BCM-7 sensing. This hand-held biodevice was satisfactorily tested for the BCM-7 detection in human urine and blood sample with an average recovery rate of ∼101.87 %. More importantly, this strategy is free from labeling steps, complex sample processing and interference from common biomolecules in blood or urine. Due to the inherent advantages of the SPCE and the NiONP, utilizing this facile sensing interface may be an ideal choice in constructing of the ultrasensitive biodevice with low cost for distinguishing of the autism disorder.