Strategies of molecular imprinting-based fluorescence sensors for chemical and biological analysis

Preparation of molecularly imprinted polymer for the specific adsorption and selective extraction of alkylresorcinols from whole wheat flour

Alkylresorcinols are important biomarkers for evaluating whole wheat foods. However, their structures encompass a broad spectrum of homologs, making isolating and analyzing individual alkylresorcinol notably challenging. Herein, we synthesized highly selective molecularly imprinted polymers (MIPs) utilizing a facile and cost-effective precipitation polymerization method and 5-heneicosylresorcinol (ARC21:0) as the template molecule. Various crucial preparation parameters were systematically optimized, such as different porogens, functional monomers, imprinting ratios, and polymerization time. The polymers were characterized through scanning electron microscopy and Fourier transform infrared spectroscopy, and their adsorption performances were thoroughly evaluated. MIPs exhibited a notably enhanced adsorption capacity compared with that of non-imprinted polymers, reaching an optimal adsorption amount of 71.75 mg·mL-1 and imprinting factor of 2.02. Altogether, the synthesized MIPs showed superior affinity and selectivity for ARC21:0, as confirmed by their selective extraction, suggesting their potential applications in the analysis, separation, and monitoring of ARC21:0 in whole wheat foods.

Template bacteria-free fabrication of surface imprinted polymer-based biosensor for E. coli detection using photolithographic mimics: Hacking bacterial adhesion

As one class of molecular imprinted polymers (MIPs), surface imprinted polymer (SIP)-based biosensors show great potential in direct whole-bacteria detection. Micro-contact imprinting, that involves stamping the template bacteria immobilized on a substrate into a pre-polymerized polymer matrix, is the most straightforward and prominent method to obtain SIP-based biosensors. However, the major drawbacks of the method arise from the requirement for fresh template bacteria and often non-reproducible bacteria distribution on the stamp substrate. Herein, we developed a positive master stamp containing photolithographic mimics of the template bacteria (E. coli) enabling reproducible fabrication of biomimetic SIP-based biosensors without the need for the "real" bacteria cells. By using atomic force and scanning electron microscopy imaging techniques, respectively, the E. coli-capturing ability of the SIP samples was tested, and compared with non-imprinted polymer (NIP)-based samples and control SIP samples, in which the cavity geometry does not match with E. coli cells. It was revealed that the presence of the biomimetic E. coli imprints with a specifically designed geometry increases the sensor E. coli-capturing ability by an "imprinting factor" of about 3. These findings show the importance of geometry-guided physical recognition in bacterial detection using SIP-based biosensors. In addition, this imprinting strategy was employed to interdigitated electrodes and QCM (quartz crystal microbalance) chips. E. coli detection performance of the sensors was demonstrated with electrochemical impedance spectroscopy (EIS) and QCM measurements with dissipation monitoring technique (QCM-D).

Conjugated molecularly imprinted polymers based on covalent organic frameworks: Fluorescent sensing platform for specific capture of urea and elimination of ethyl carbamate

This study described the preparation of an azide covalent organic framework-embedded molecularly imprinted polymers (COFs(azide)@MIPs) platform for urea adsorption and indirect ethyl carbamate (EC) removal from Chinese yellow rice wine (Huangjiu). By modifying the pore surface of COFs using the copper-catalyzed azide-alkyne cycloaddition (CuAAC) reaction, COFs(azide) with a high fluorescence quantum yield and particular recognition ability were inventively produced. In order to selectively trap urea, the COFs(azide) were encased in an imprinted shell layer via imprinting technology. With a detection limit (LOD) of 0.016 μg L-1 (R2 = 0.9874), the COFs(azides)@MIPs demonstrated a good linear relationship with urea in the linear range of 0-5 μg L-1. Using real Huangjiu samples, the spiking recovery trials showed the viability of this sensing platform with recoveries ranging from 88.44 % to 109.26 % and an RSD of less than 3.40 %. The Huangjiu processing model system achieved 38.93 % EC reduction by COFs(azides)@MIPs. This research will open up new avenues for the treatment of health problems associated with fermented alcoholic beverages, particularly Huangjiu, while also capturing and removing hazards coming from food.

Recent advances in molecularly imprinted polymers (MIPs) for visual recognition and inhibition of α-dicarbonyl compound-mediated Maillard reaction products

α-Dicarbonyl compounds (α-DCs) are important intermediates and precursors of harmful Maillard reaction products (e.g., acrylamide and late glycosylation end-products), and they exist widely in thermoprocessed sugar- or fat-rich foods. α-DCs and their end-products are prone to accumulation in the human body and lead to the development of various chronic diseases. Therefore, detection of α-DCs and their associated hazards in food samples is crucial. This paper reviews the preparation of molecularly imprinted polymers (MIPs) enabling visual intelligent responses and the strategies for recognition and capture of α-DCs and their associated hazards, and provides a comprehensive summary of the development of visual MIPs, including integration strategies and applications with real food samples. The visual signal responses as well as the mechanisms for hazard recognition and capture are highlighted. Current challenges and prospects for visual MIPs with advanced applications in food, agricultural and environmental samples are also discussed. This review will open new horizons regarding visual MIPs for recognition and inhibition of hazards in food safety.

Ultrafast Visual Detection of a Trace Amount of Water by Highly Efficient Hybrid Manganese Halides

A quantitative water detection method is urgently needed in storage facilities, space exploration, and the chemical industry. Although numerous physical techniques have been widely utilized to determine the water content, they still suffer from many disadvantages such as highly expensive special instruments, complicated analysis processes, etc. Hence, a convenient, rapid, and sensitive water analysis method is highly desirable. Herein, we developed a visual fluorescence sensing technology for water detection based on reversible PL off-on switching of organic-inorganic hybrid zero-dimensional (0D) manganese halides. In this work, a family of hybrid manganese halides were synthesized through a facile solution method, namely, [NH4(18-Crown-6)]2MnBr4, [Ca(18-Crown-6)·3H2O](18-Crown-6)MnBr4, [NH4(dibenzo-18-Crown-6)]2MnBr4, and [Ca(dibenzo-18-Crown-6)·2H2O]MnBr4. Excited by UV light, these highly crystalline manganese halides exhibit strong green light emissions from the d-d electron transition of Mn2+ with near-unity photoluminescence quantum yield and submillisecond lifetime. Benefiting from the dynamic and weak ionic bonding interactions, these 0D manganese halides display reversible water-response on/off luminescence switching but fail in any other aprotic solvents. Therefore, these 0D hybrid manganese halides can be explored as ultrafast visual fluorescence probes to detect the trace amount of water in organic solvents with multiple superiorities of rapid response time (< 2 s), ultralow detection limit (9.71 ppm), excellent repeatability, etc. The reversible water-response luminescent on/off switching also provides a binary optical gate with advanced applications in anticounterfeiting and information security, etc.

Molecular Memory Micromotors for Fast Snake Venom Toxin Dynamic Detection

The analysis and detection of snake venom toxins are a matter of great importance in clinical diagnosis for fast treatment and the discovery of new pharmaceutical products. Current detection methods have high associated costs and require the use of sophisticated bioreceptors, which in some cases are difficult to obtain. Herein, we report the synthesis of template-based molecularly imprinted micromotors for dynamic detection of α-bungarotoxin as a model toxin present in the venom of many-banded krait (Bungarus multicinctus). The specific recognition sites are built-in in the micromotors by incubation of the membrane template with the target toxin, followed by a controlled electrodeposition of a poly(3,4-ethylenedioxythiophene)/poly(sodium 4-styrenesulfonate) polymeric layer, a magnetic Ni layer to promote magnetic guidance and facilitate washing steps, and a Pt layer for autonomous propulsion in the presence of hydrogen peroxide. The enhanced fluid mixing and autonomous propulsion increase the likelihood of interactions with the target analyte as compared with static counterparts, retaining the tetramethylrhodamine-labeled α-bungarotoxin on the micromotor surface with extremely fast dynamic sensor response (after just 20 s navigation) in only 3 μL of water, urine, or serum samples. The sensitivity achieved meets the clinically relevant concentration postsnakebite (from 0.1 to 100 μg/mL), illustrating the feasibility of the approach for practical applications. The selectivity of the protocol is very high, as illustrated by the absence of fluorescence in the micromotor surface in the presence of α-cobratoxin as a representative toxin with a size and structure similar to those of α-bungarotoxin. Recoveries higher than 95% are obtained in the analysis of urine- and serum-fortified samples. The new strategy holds considerable promise for fast, inexpensive, and even onsite detection of several toxins using multiple molecularly imprinted micromotors with tailored recognition abilities.

A generalizable sensing platform based on molecularly imprinted polymer-aptamer double recognition and nanoenzyme assisted photoelectrochemical-colorimetric dual-mode detection

Developing highly sensitive and selective methods that incorporate specific recognition elements is crucial for detecting small molecules because of the limited availability of small molecule antibodies and the challenges in obtaining sensitive signals. In this study, a generalizable photoelectrochemical-colorimetric dual-mode sensing platform was constructed based on the synergistic effects of a molecularly imprinted polymer (MIP)-aptamer sandwich structure and nanoenzymes. The MIP functionalized peroxidase-like Fe3O4 (Fe3O4@MIPs) and alkaline phosphatase mimic Zr-MOF labeled aptamer (Zr-mof@Apt) were used as the recognition elements. By selectively accumulating dibutyl phthalate (DBP), a small molecule target model, on Fe3O4@MIPs, the formation of Zr-MOF@Apt-DBP- Fe3O4@MIPs sandwich structure was triggered. Fe3O4@MIPs oxidized TMB to form blue-colored oxTMB. However, upon selective accumulation of DBP, the catalytic activity of Fe3O4@MIPs was inhibited, resulting in a lighter color that was detectable by the colorimetric method. Additionally, Zr-mof@Apt effectively catalyzed the hydrolysis of L-Ascorbic acid 2-phosphate sesquimagnesium salt hydrate (AAPS), generating ascorbic acid (AA) that could neutralize the photogenerated holes to decrease the photocurrent signals for PEC sensing and reduce oxTMB for colorimetric testing. The dual-mode platform showed strong linearity for different concentrations of DBP from 1.0 pM to 10 μM (PEC) and 0.1 nM to 0.5 μM (colorimetry). The detection limits were 0.263 nM (PEC) and 30.1 nM (colorimetry) (S/N = 3), respectively. The integration of dual-signal measurement mode and sandwich recognition strategy provided a sensitive and accurate platform for the detection of small molecules.

Recent Advancements in Molecularly Imprinted Polymers Based Aptasensors: Critical Role of Nanomaterials for the Efficient Food Safety Analysis

Biosensors are being studied extensively for their ability to detect and analyze molecules. There has been a growing interest in combining molecular imprinted polymers (MIPs) and aptamers to create hybrid recognition elements that offer advantages such as target binding, sensitivity, selectivity, and stability. These hybrid elements have been successfully used in identifying a wide range of analytes in food samples. However, the application of MIP-based aptasensors in different sensing approaches is still challenging due to the low conductivity of MIPs-aptamers and limited adsorption capacity of MIPs. To address these limitations, researchers have been exploring the use of nanomaterials (NMs) to design efficient multiple-recognition systems that exploit the synergies between aptamers and MIPs. These hybrid systems can enhance the sensitivity and selectivity of MIP-based aptasensors in quantifying analytical samples. This review provides a comprehensive overview of recent advancements in the field of MIP-based aptasensors. It also introduces technologies that combine MIPs and aptamers to achieve higher sensitivity and selectivity in quantifying analytical samples. The review also highlights potential future trends and practical approaches that can be employed to address the limitations of MIP-based aptasensors, including the use of new NMs, the development of new fabrication techniques, and the integration of MIP-based aptasensors with other analytical tools.

Molecular imprinting-based triple-emission ratiometric fluorescence sensor with aggregation-induced emission effect for visual detection of doxycycline

The development of high-performance sensors for doxycycline (DOX) detection is necessary because its residue accumulation will cause serious harm to human health and the environment. Here, a novel tri-emission ratiometric fluorescence sensor was proposed by using "post-mixing" strategy of different emissions fluorescence molecularly imprinted polymers with salicylamide as dummy template (DMIPs). BSA was chosen as assistant functional monomer, and also acted as sensitizers for the aggregation-induced emission (AIE) effect of DOX. The blue-emitting carbon dots and the red-emitting CdTe quantum dots were separately introduced into DMIPs as the response signals. Upon DOX recognition within 2 min, blue and red fluorescence of the tri-emission DMIPs sensor were quenched while green fluorescence of DOX was enhanced, resulting in a wide range of color variations observed over bluish violet-rosered-light pink-orange-yellow-green with a detection limit of 0.061 μM. The sensor possessed highly selective recognition and was successfully applied to detect DOX in complicated real samples. Moreover, with the fluorescent color collection and data processing, the smartphone-assisted visual detection of the sensors showed satisfied sensitivity with low detection limit. This work provides great potential applications for rapid and visual detection of antibiotics in complex substrates.

Molecularly Imprinted Electrochemical Sensor Based on α-Cyclodextrin Inclusion Complex and MXene Modification for Highly Sensitive and Selective Detection of Alkylresorcinols in Whole Wheat Foods

Authenticating whole wheat foods poses a significant challenge for both the grain industry and consumers. Alkylresorcinols (ARs), serving as biomarkers of whole wheat, play a crucial role in assessing the authenticity of whole wheat foods. Herein, we introduce a novel molecularly imprinted electrochemical sensor with modifications involving a molecularly imprinted polymer (MIP) and MXene nanosheets, enabling highly sensitive and selective detection of ARs. Notably, we specifically chose 5-heneicosylresorcinol (AR21), the predominant homologue in whole wheat, as the template molecule. α-Cyclodextrin and acrylamide served as dual functional monomers, establishing a robust multiple interaction between the MIP and AR21. As a result, the sensor exhibited a wide linear range of 0.005 to 100 μg·mL-1 and a low detection limit of 2.52 ng·mL-1, demonstrating exceptional selectivity and stability. When applied to commercial whole wheat foods, the assay achieved satisfactory recoveries and accuracy, strongly validating the practicality and effectiveness of this analytical technique.

Polyvinyl alcohol-derived-carbon quantum dots based fluorometric "On-Off" probe for moxifloxacin detection in milk and egg samples

Unconditional use of antibiotics triggered the process of bacterial resistance and causes major health problems. Nowadays, antibiotics majorly used in animals not only for infection treatment but also as mass promotor. The excess amount of antibiotics residue in animal derived foods which accelerate antibiotic resistance (ABR). So, here, a simple and quick carbon quantum dots(CQDs) based fluorometric "On-Off" probe was developed for detection of moxifloxacin (MOXI) in milk and egg samples. The CQDs emits blue emission and are uniformly distributed with average particle size 5.9 ± 0.22 nm. With MOXI, fluorescence intensity of CQDs at 372 nm decreased due to inner filter effect (IFE) and a new peak appeared at 508 nm correspondence to MOXI. The probe shows linear response with MOXI concentration varies as 0.025 µM - 15.0 µM with lower detection limit (LOD) of 6.34 nM. The real sample applicability test proved that the sensors have excellent efficacy for food applications.

Lanthanide metal-organic framework-based surface molecularly imprinted polymers ratiometric fluorescence probe for visual detection of perfluorooctanoic acid with a smartphone-assisted portable device

Perfluorooctanoic acid (PFOA) poses a threat to the environment and human health due to its persistence, bioaccumulation, and reproductive toxicity. Herein, a lanthanide metal-organic framework (Ln-MOF)-based surface molecularly imprinted polymers (SMIPs) ratiometric fluorescence probe (Eu/Tb-MOF@MIPs) and a smartphone-assisted portable device were developed for the detection of PFOA with high selectivity in real water samples. The integration of Eu/Tb MOFs as carriers not only had highly stable multiple emission signals but also prevented deformation of the imprinting cavity of MIPs. Meanwhile, the MIPs layer preserved the fluorescence of Ln-MOF and provided selective cavities for improved specificity. Molecular dynamics (MD) was employed to simulate the polymerization process of MIPs, revealing that the formation of multiple recognition sites was attributed to the establishment of hydrogen bonds between functional monomers and templates. The probe showed a good linear relationship with PFOA concentration in the range of 0.02-2.8 μM, by giving the limit of detection (LOD) of 0.98 nM. Additionally, The red-green-blue (RGB) values analysis based on the smartphone-assisted portable device demonstrated a linear relationship of 0.1-2.8 μM PFOA with the LOD of 3.26 nM. The developed probe and portable device sensing platform exhibit substantial potential for on-site detecting PFOA in practical applications and provide a reliable strategy for the intelligent identification of important targets in water environmental samples.

A SERS-assisted 3D organotypic microfluidic chip for in-situ visualization and monitoring breast cancer extravasation process

Extravasation, as one of the key steps in cancer metastasis, refers to the process where tumor cells escape the bloodstream by crossing the vascular endothelium and invade the targeted tissue, which accounts for the low five-year survival rate of cancer patients. Understanding the mechanism of cancer metastasis and inhibiting extravasation are crucial to improve patient prognosis. Here, a 3D organotypic microfluidic chip combined with SERS-based protein imprinted nanomaterials (SPINs) was proposed to study the extravasation process in vitro. The chip consists of a collagen gel channel and a vascular channel where human vein endothelial cells (HUVECs) and breast cancer cells are injected sequentially to induce extravasation. By comparing two subtypes of breast cancer cells (MCF-7 and MDA-MB-231), we successfully observed the difference in extravasation capabilities between two kinds of cells through fluorescence imaging. Meanwhile, thanks to the high specificity of molecular imprinting technology and the high sensitivity of surface enhanced Raman scattering (SERS), SPINs were utilized to analyze the concentration of several cancer secretions (interleukin-6 and interleukin-8) in complex biological fluid in real-time. Further, our model showed that downregulation of secretions by therapeutic drugs can inhibit the extravasation of breast cancers. This microfluidic model may pave the way for the fundamental research of the cancer metastasis and evaluating the therapeutic efficacy of potential drugs.

Advances in the application of logic gates in nanozymes

Nanozymes are a class of nanomaterials with biocatalytic function and enzyme-like activity, whose advantages include high stability, low cost, and mass production. They can catalyze the substrates of natural enzymes based on specific nanostructures and serve as substitutes for natural enzymes. Their applied research involves a wide range of fields such as biomedicine, environmental governance, agriculture, and food. Molecular logic gates are a new cross-disciplinary discipline, which can simulate the function of silicon circuits on a molecular scale, perform single or multiple input logic operations, and generate logic outputs. A molecular logic gate is a binary operation that converts an input signal into an output signal according to the rules of Boolean logic, generating two signals, a high level, and a low level. The high and low levels represent the "true" and "false" values of the logic gates, and their outputs correspond to "l" and "0" of the molecular logic gates, respectively. The combination of nanozymes and logic gates is a novel and attractive research direction, and the cross-application of the two brings new opportunities and ideas for various fields, such as the construction of efficient biocomputers, intelligent drug delivery systems, and the precise diagnosis of diseases. This review describes the application of logic gates based on nanozymes, which is expected to provide a certain theoretical foundation for researchers' subsequent studies.

Multifunctional Eu3+-MOF for simultaneous quantification of malachite green and leuco-malachite green and efficient adsorption of malachite green

Multi-target detection combined with in-situ removal of contaminants is a challenging issue difficult to overcome. Herein, a dual-emissive Eu3+-metal organic framework (Eu3+-MOF) was constructed by pre-functionalization with a blue-emissive ligand and post-functionalization with red-emissive Eu3+ ions using a UiO-66 precursor. The fluorescence of the synthesized Eu3+-MOF is highly selective and sensitive toward malachite green (MG) and its metabolite leuco-malachite green (LMG), which are environmentally persistent and highly toxic to humans. The limit of detection of MG and LMG are 34.20 and 1.98 nM, respectively. Interestingly, the fluorescence of this Eu3+-MOF showed ratiometric but different responsive modes toward MG and LMG, which enabled the simultaneous quantification of MG and LMG. Furthermore, a paper-based sensor combined with the smartphone was fabricated, which facilitated not only the dual-channel detection of MG, but also its portable, visual, rapid, and intelligent determination. Furthermore, the high surface area of MOFs, together with the coordinate bonding interaction, π-π stacking, and electrostatic interaction sites, endows Eu3+-MOF with the efficient ability toward MG removal. This multifunctional Eu3+-MOF can be successfully used for trace detection, simultaneous determination of MG and LMG, as well as efficient removal of MG. Thus, it exhibits bright prospects for widespread applications in the field of food and environmental analysis.

Plasmonic Fluorescence Sensors in Diagnosis of Infectious Diseases

The increasing demand for rapid, cost-effective, and reliable diagnostic tools in personalized and point-of-care medicine is driving scientists to enhance existing technology platforms and develop new methods for detecting and measuring clinically significant biomarkers. Humanity is confronted with growing risks from emerging and recurring infectious diseases, including the influenza virus, dengue virus (DENV), human immunodeficiency virus (HIV), Ebola virus, tuberculosis, cholera, and, most notably, SARS coronavirus-2 (SARS-CoV-2; COVID-19), among others. Timely diagnosis of infections and effective disease control have always been of paramount importance. Plasmonic-based biosensing holds the potential to address the threat posed by infectious diseases by enabling prompt disease monitoring. In recent years, numerous plasmonic platforms have risen to the challenge of offering on-site strategies to complement traditional diagnostic methods like polymerase chain reaction (PCR) and enzyme-linked immunosorbent assays (ELISA). Disease detection can be accomplished through the utilization of diverse plasmonic phenomena, such as propagating surface plasmon resonance (SPR), localized SPR (LSPR), surface-enhanced Raman scattering (SERS), surface-enhanced fluorescence (SEF), surface-enhanced infrared absorption spectroscopy, and plasmonic fluorescence sensors. This review focuses on diagnostic methods employing plasmonic fluorescence sensors, highlighting their pivotal role in swift disease detection with remarkable sensitivity. It underscores the necessity for continued research to expand the scope and capabilities of plasmonic fluorescence sensors in the field of diagnostics.

A low-cost and portable fluorometer based on an optical pick-up unit for chlorophyll-a detection

Chlorophyll-a (Chl-a) fluorescence detection is an important technique for monitoring water quality. In this work, we proposed an approach that employs the mass-produced low-cost optical pick-up unit (OPU) extracted from the high-definition digital versatile disc (HD-DVD) drive as the key optical component for our chlorophyll-a fluorometer. The built-in blue-violet 405 nm laser diode of the OPU acts as the excitation light to perform laser-induced fluorescence (LIF). The laser driver and a series of intrinsic lenses within the OPU, such as an objective lens with a numerical aperture (NA) of 0.65 and a collimating lens, help reduce the size, cost, and system complexity of the fluorometer. By integrating off-the-shelf electronic components, miniaturized optical setups, and 3D-printed assemblies, we have developed a low-cost, easy-to-make, standalone, and portable fluorometer. Finally, we validated the performance of the device for chlorophyll-a fluorescence detection under laboratory and on-site conditions, which demonstrated its great potential in water monitoring applications. The limit of detection (LOD) for chlorophyll-a is 0.35 μg/L, the size of the device is 151 × 100 × 80 mm3, and the total cost of the proposed fluorometer is as low as 137.5 USD. © 2023 Elsevier Science. All rights reserved.

Highly sensitive quantitative detection of glycans on exosomes in renal disease serums using fluorescence signal amplification strategies

Exosomal glycoproteins play a significant role in many physiological and pathological processes. However, the detection of exosome surface glycans is currently challenged by the complexity of biological samples or the sensitivity of the methods. Herein, we prepared a novel fluorescent probe of biotin-functionalized nanocrystals (denoted as CdTe@cys-biotin) and applied it for the first time for the detection of the expression of exosomal surface glycans using a fluorescence amplification strategy. First, the dual affinity of TiO2 and CD63 aptamers of Fe3O4@TiO2-CD63 was utilized to rapidly and efficiently capture exosomes within 25 min. In this design, interference from other vesicles and soluble impurities can be avoided due to the dual recognition strategy. The chemical oxidation of NaIO4 oxidized the hydroxyl sites of exosomal surface glycans to aldehydes, which were then labeled with aniline-catalyzed biotin hydrazide. Using the high affinity between streptavidin and biotin, streptavidin-FITC and probes were successively anchored to the glycans on the exosomes. The fluorescent probe achieved the dual function of specific recognition and fluorescent labeling by modifying biotin on the surface of nanocrystals. This method showed excellent specificity and sensitivity for exosomes at concentrations ranging from 3.30 × 102 to 3.30 × 106 particles/mL, with a detection limit of 121.48 particles/mL. The fluorescent probe not only quantified exosomal surface glycans but also distinguished with high accuracy between serum exosomes from normal individuals and patients with kidney disease. In general, this method provides a powerful platform for sensitive detection of exosomes in cancer diagnosis.

Nanopore surface engineering of molecular imprinted mesoporous organosilica for rapid and selective detection of L-thyroxine

To develop a biosensing platform for precise diagnosis and management of thyroid-related diseases, the sensitive and selective recognition and identification of L-thyroxine (T4), a thyroid hormone, remains challenging. We herein introduce T4-imprinted mesoporous organosilica (T4-IMO) for sensitive and specific detection of T4 via the sophisticated engineering of pore surfaces using additives with different polarities. The pore surface of T4-IMO emitting a stable fluorescence signal is simply modified by fixed additives. Additives embedded in the pore surface promote the rebinding response of T4 into the recognized cavities, subsequently sensitizing T4 detection. Notably, T4-IMO containing abundant fluorine elements on the pore surface shows a high affinity toward T4, remarkably boosting the rebinding capacity. In addition to good selectivity to T4, the "turn-off" fluorescent signal exhibits a linear relationship with the logarithm of T4 concentration in a range of 0-500 nM with a detection limit of 0.47 nM in synthetic urine samples. Our findings can establish an insightful strategy for the rational design of molecular-recognition-based sensor systems for the selective and sensitive detection of target analytes.

Enhanced Molecularly Imprinted Fluorescent Test Strip for Rapid and Visual Detection of Norfloxacin via a Smartphone

Paper-based test strips with on-site visual detection have become a hot spot in the field of target detection. Yet, low specific surface area and uneven deposition limit the further application of test strips. Herein, a novel "turn-on" ratio of molecularly imprinted membranes (Eu@CDs-MIMs) was successfully prepared based on a Eu complex-doped polyvinylidene fluoride membrane for the selective, rapid and on-site visual detection of norfloxacin (NOR). The formation of surface-imprinted polymer-containing carbon dots (CDs) improves the roughness and hydrophilicity of Eu@CDs-MIMs. Fluorescence lifetimes and UV absorption spectra verified that the fluorescence enhancement of CDs is based on the synergistic effect of charge transfer and hydrogen bonding between CDs and NOR. The fluorescent test strip showed a linear fluorescent response within the concentration range of 5-50 nM with a limit of detection of 1.35 nM and a short response time of 1 min. In comparison with filter paper-based test strips, Eu@CDs-MIMs exhibit a brighter and more uniform fluorescent color change from red to blue that is visible to the naked eye. Additionally, the applied ratio fluorescent test strip was combined with a smartphone to translate RGB values into concentrations for the visual and quantitative detection of NOR and verified the detection results using high-performance liquid chromatography. The portable fluorescent test strip provides a reliable approach for the rapid, visual, and on-site detection of NOR and quinolones.

Cellulose nanocrystals-based fluorescent biocarrier binding GAPDH protein with high affinity in cancer-target doxorubicin delivery

Cellulose nanocrystals (CNCs) have shown immense promise in medical applications, especially in cancer treatment, owing to their excellent biocompatibility and potential for functional modifications. Considering the crucial role of the protein reduced glyceraldehyde-phosphate dehydrogenase (GAPDH) in cancer progression, we embarked to immobilize CNCs with GAPDH and fluorescent molecules FITC, creating FCNC-G through regioselective modifications. Furthermore, an accelerated proliferation of cancer cells was observed in the presence of FCNC-G. To evaluate the therapeutic potential of FCNC-G, we loaded it with doxorubicin (DOX) to create FCNC-G-D and tested its effect on Hepg2. We observed a significant inhibition of Hepg2 cells exposed to low concentrations of FCNC-G-D. Additionally, mitochondrial dysfunction was detected in Hepg2 and Cal27 cells, treated with FCNC-G-D, but not in A375 cells, further highlighting its selective impact on cancer cells. Given the limitations of DOX in clinical applications, our findings establish a strong foundation for further research on the potential of CNCs grafted with GAPDH as a novel cancer-targeted biocarrier with high affinity. The combination of CNCs unique properties with targeted delivery strategies holds tremendous promise for the development of more effective and safer cancer therapies.

A smartphone-assisted one-step bicolor colorimetric detection of glucose in neutral environment based on molecularly imprinted polymer nanozymes

In order to improve the specificity and the peroxidase-like activity of nanozyme at the neutral pH as well as to facilitate the naked-eye visual detection of the analyte concentration, a nanozyme based on molecularly imprinted polymers (MIPNs) for selective and bicolor colorimetric detection of glucose in neutral environment was developed. Compared with free nanozyme, the synthesized MIPNs showed a better catalytic capability, with a catalytic efficiency (kcat/Km) 9.5 times higher than that of free nanozyme. The kinetics experiment showed that the MIPNs demonstrated a fast kinetic feature and the kinetic data fitted a pseudo-first-order model. In practical application, the color of the detection system changed gradually from pink to blue as the glucose concentration increased in a broad linear range from 0 to 3 mM, with a detection limit of 6.22 μM. The colorimetric visualization of glucose concentration was read with a smartphone and no other instrument was needed. Therefore, a manageable and highly efficient method for the MIPNs-catalyzed visualization at the neutral pH and the one-step bicolor visual detection was constructed. This newly established method may also provide a new idea for further development and application of nanozymes.

Post-imprinting modification of molecularly imprinted polymer for proteins detection: A review

Inspired by protein post-translational modification (PTM), post-imprinting modification (PIM) has been proposed and developed to prepare novel molecularly imprinted polymers (MIPs), which are similar to functionalized biosynthetic proteins. The PIM involves site-directed modifications in the imprinted cavity of the MIP, such as introducing high-affinity binding sites and introducing fluorescent signal molecules. This modification makes the MIP further functionalized and improves the shortcomings of general molecular imprinting, such as single function, low selectivity, low sensitivity, and inability to fully restore the complex function of natural antibodies. This paper describes the characteristics of PIM strategies, reviews the latest research progress in the recognition and detection of protein biomarkers such as lysozyme, prostate-specific antigen, alpha-fetoprotein, human serum albumin, and peptides, and further discusses the importance, main challenges, and development prospects of PIM. The PIM technology has the potential to develop a new generation of biomimetic recognition materials beyond natural antibodies. It can be used in bioanalysis and other multitudinous fields for its unique features in molecule recognition.

A magnetic molecular imprinting-based fluorescence probe for sensitive and selective detection of 2,4-D herbicide

A new magnetic molecular imprinting-based turn-on fluorescence probe (Fe3 O4 NPs@SiO2 @NBD@MIPs) has been synthesized via a facile sol-gel polymerization for the detection of 2,4-dichlorophenoxyacetic acid (2,4-D). Based on the photoinduced electron transfer (PET) of nitrobenzoxadiazole (NBD), 2,4-D can be recognized by enhancement of NBD fluorescence. With the presence of Fe3 O4 in the core of the probe, this sensor can also be reused many times using magnetic aggregation methods. After the addition of various concentrations of 2,4-D, the fluorescence peak at 530 nm (excitation of 468 nm) increased linearly ranging from 0.1 to 3 μM with a detection limit of 0.023 μM. This sensing system is believed to be available for detecting 2,4-D in real samples, with high recovery rates ranging from 94% to 108% for three spike levels of 2,4-D with precisions below 5%.

Synthesis Strategies, Optical Mechanisms, and Applications of Dual-Emissive Carbon Dots

Tuning the optical properties of carbon dots (CDs) and figuring out the mechanisms underneath the emissive phenomena have been one of the most cutting-edge topics in the development of carbon-based nanomaterials. Dual-emissive CDs possess the intrinsic dual-emission character upon single-wavelength excitation, which significantly benefits their multi-purpose applications. Explosive exploitations of dual-emissive CDs have been reported during the past five years. Nevertheless, there is a lack of a systematic summary of the rising star nanomaterial. In this review, we summarize the synthesis strategies and optical mechanisms of the dual-emissive CDs. The applications in the areas of biosensing, bioimaging, as well as photoelectronic devices are also outlined. The last section presents the main challenges and perspectives in further promoting the development of dual-emissive CDs. By covering the most vital publications, we anticipate that the review is of referential significance for researchers in the synthesis, characterization, and application of dual-emissive CDs.

Research progress of sensors based on molecularly imprinted polymers in analytical and biomedical analysis

Molecularly imprinted polymers (MIPs) have had tremendous impact on biomimetic recognition due to their precise specificity and high affinity comparable to that of antibodies, which has shown the great advantages of easy preparation, good stability and low cost. The combination of MIPs with other analytical technologies can not only achieve rapid extraction and sensitive detection of target compounds, improving the level of analysis, but also achieve precise targeted delivery, in-vivo imaging and other applications. Among them, the recognition mechanism plays a vital role in chemical and biological sensing, while the improvement of the recognition element, such as the addition of new nanomaterials, can greatly improve the analytical performance of the sensor, especially in terms of selectivity. Currently, due to the need for rapid diagnosis and improved sensing properties (such as selectivity, stability, and cost-effectiveness), researchers are investigating new recognition elements and their combinations to improve the recognition capabilities of chemical sensing and bio-sensing. Therefore, this review mainly discusses the design strategies of optical sensors, electrochemical sensors and photoelectric sensors with molecular imprinting technology and their applications in environmental systems, food fields, drug detection and biology including bacteria and viruses.

Progress in optical sensors-based uric acid detection

The escalating number of patients affected by various diseases, such as gout, attributed to abnormal uric acid (UA) concentrations in body fluids, has underscored the need for rapid, efficient, highly sensitive, and stable UA detection methods and sensors. Optical sensors have garnered significant attention due to their simplicity, cost-effectiveness, and resistance to electromagnetic interference. Notably, research efforts have been directed towards UA on-site detection, enabling daily monitoring at home and facilitating rapid disease screening in the community. This review aims to systematically categorize and provide detailed descriptions of the notable achievements and emerging technologies in UA optical sensors over the past five years. The review highlights the advantages of each sensor while also identifying their limitations in on-site applications. Furthermore, recent progress in instrumentation and the application of UA on-site detection in body fluids is discussed, along with the existing challenges and prospects for future development. The review serves as an informative resource, offering technical insights and promising directions for future research in the design and application of on-site optical sensors for UA detection.

A novel method to prepare water-soluble cellulose-based fluorescent probes for highly sensitive and selective detection and removal of Hg2+/Hg22+ ions

Improving the water solubility of natural product cellulose and using it to treat heavy metal ions is very important. In this work, cellulose-based fluorescent probes containing BODIPY fluorophore were synthesized by simple chemical method, which realized the selective recognition and removal of Hg2+/Hg22+ ions in an aqueous system. Firstly, fluorescent small molecule (BOK-NH2) bearing -NH2 group was synthesized through Knoevenagel condensation reaction between BO-NH2 and cinnamaldehyde. Secondly, via the etherification of -OH on the cellulose, substituents bearing -C ≡ CH groups with different lengths at the end are grafted on the cellulose. Finally, cellulose-based probes (P1, P2, and P3) were prepared by amino-yne click reaction. The solubility of cellulose is improved greatly, especially the cellulose derivative with branched long chains has excellent solubility in water (P3). Benefiting from the improved solubility, P3 could be processed into solutions, films, hydrogels, and powders. Upon the addition of Hg2+/Hg22+ ions, the fluorescence intensity enhanced, which are "turn-on" probes. At the same time, the probes could be utilized as efficient adsorbents for Hg2+/Hg22+ ions. The removal efficiency of P3 for Hg2+/Hg22+ is 79.7 %/82.1 %, and the adsorption capacity is 159.4 mg·g-1/164.2 mg·g-1. These cellulose-based probes are expected to be employed in the treatment of polluted environments.

Molecular imprinting-based ratiometric fluorescence sensors for environmental and food analysis

Environmental protection and food safety are closely related to the healthy development of human society; there is an urgent need for relevant analytical methods to determine environmental pollutants and harmful substances in food. Molecular imprinting-based ratiometric fluorescence (MI-RFL) sensors, constructed by combining molecular imprinting recognition and ratiometric fluorescence detection, possess remarkable advantages such as high selectivity, anti-interference ability, high sensitivity, non-destruction and convenience, and have attracted increasing interest in the field of analytical determination. Herein, recent advances in MI-RFL sensors for environmental and food analysis are reviewed, aiming at new construction strategies and representative determination applications. Firstly, fluorescence sources and possible sensing principles are briefly outlined. Secondly, new imprinting techniques and dual/ternary-emission fluorescence types that improve sensing performances are highlighted. Thirdly, typical analytical applications of MI-RFL sensors in environmental and food samples are summarized. Lastly, the challenges and perspectives of the MI-RFL sensors are proposed, focusing on improving sensitivity/visualization and extending applications.

Sensitive and selective detection of p-nitroaniline with the assistance of a fluorescence capillary imprinted sensor

A fluorescence capillary imprinted sensor was first prepared with high selectivity and sensitivity for the detection of p-nitroaniline. The fluorescence imprinted polymer prepared by the sol-gel method using blue CdTe quantum dots as the fluorescence source was self-sucked into an activated capillary to form the fluorescence imprinted capillary (CdTe@FMIP-CA) sensor. The specificity and selectivity tests showed that the CdTe@FMIP-CA sensor has a high selective recognition ability toward p-nitroaniline. The CdTe@FMIP-CA sensor can quickly and specifically recognize p-nitroaniline within 2 min with a high specific fluorescence response efficiency. The fluorescence intensity of the CdTe@FMIP-CA sensor remained stable within 60 min. A good linear relationship was established between the fluorescence quenching efficiency of the CdTe@FMIP-CA sensor with a p-nitroaniline concentration range of 0.2-100 μmol L-1 with the detection limit of 4.6 nmol L-1 and the quantitation limit of 0.2 μmol L-1. The imprinting factor was calculated as 3.88. The method has been successfully applied for the determination of trace p-nitroaniline in lake water, tap water, urine, and serum samples. The CdTe@FMIP-CA sensor realized the sensitive and selective detection of p-nitroaniline with the lower consumption of microvolume reagent (18 μL per time), which provided a novel strategy for highly sensitive analysis of microvolume trace pollutants.

Time-Resolved Fluorescence Spectroscopy of Molecularly Imprinted Nanoprobes as an Ultralow Detection Nanosensing Tool for Protein Contaminants

Currently, optical sensors based on molecularly imprinted polymers (MIPs) have been attracting significant interest. MIP sensing relies on the combination of the MIP's selective capability, which is conveyed to the polymeric material by a template-assisted synthesis, with optical techniques that offer exquisite sensitivity. In this work, we devised an MIP nanoparticle optical sensor for the ultralow detection of serum albumin through time-resolved fluorescence spectroscopy. The Fluo-nanoMIPs (&empty;~120 nm) were synthetized using fluorescein-O-methacrylate (0.1×, 1×, 10× mol:mol versus template) as an organic fluorescent reporter. The ability of 0.1× and 1×Fluo-nanoMIPs to bind albumin (15 fM-150 nM) was confirmed by fluorescence intensity analyses and isothermal titration calorimetry. The apparent dissociation constant (K_app) was 30 pM. Conversely, the 10× fluorophore content did not enable monitoring binding. Then, the time-resolved fluorescence spectroscopy of the nanosensors was studied. The 1×Fluo-nanoMIPs showed a decrease in fluorescence lifetime upon binding to albumin (100 fM-150 nM), K_app = 28 pM, linear dynamic range 3.0-83.5 pM, limit of detection (LOD) 1.26 pM. Selectivity was confirmed testing 1×Fluo-nanoMIPs against competitor proteins. Finally, as a proof of concept, the nanosensors demonstrated detection of the albumin (1.5 nM) spiked in wine samples, suggesting a possible scaling up of the method in monitoring allergens in wines.

Recent advances of ratiometric sensors in food matrices: mycotoxins detection

The public health problem caused by mycotoxins contamination has received a great deal of attention worldwide. Mycotoxins produced by filamentous fungi widely distributed in foodstuffs can cause adverse impacts on humans and livestock, posing serious health threats. Particularly worth mentioning is that mycotoxins can accumulate in organisms and be enriched through the food chain. Improving early trace detection and control from the source is a more desirable approach than the contaminated food disposal process to ensure food safety. Conventional sensors are susceptible to interference from various components in intricate food matrices when detecting trace mycotoxins. The application of ratiometric sensors avoids signal fluctuations, and reduce background influences, which casts new light on developing sensors with superior performance. This work is the first to provide an overview of the recent progress of ratiometric sensors in the detection of mycotoxins in intricate food matrices, and highlight the output types of ratiometric signal with respect to accurate quantitative analysis. The prospects of this field are also included in this paper and are intended to have key ramifications on the development of sensing detection conducive to food safety.

A test strip constructed by molecular imprinting for ratiometric fluorescence with ultra-low limit of detection for selective monitoring of Sudan I in chili powder

An up-conversion molecularly imprinted ratiometric fluorescent probe with a monodisperse nuclear-satellite structure and its test strip are designed which can avoid fluorescent background interference to detect Sudan I in chili powder highly selective and sensitive. The detection mechanism is based on the selective recognition of Sudan I by imprinted cavities on the surface of ratiometric fluorescent probe and the inner filter effect between Sudan I molecules and the emission of up-conversion materials (NaYF₄:Yb,Tm). Under optimized experimental conditions, the response of fluorescent ratio signals (F₄₇₅/F₆₄₅) of this test strip show a good linear relationship in the range 0.02-50 μM Sudan I. The limits of detection and quantitation are as low as 6 nM and 20 nM, respectively. Sudan I is selectively detected in the presence of fivefold higher concentrations of interfering substances (imprinting factor up to 4.4). Detection of Sudan I in chili powder samples show ultra-low LOD (44.7 ng/g), satisfactory recoveries (94.99-105.5%) and low relative standard deviation (≤ 2.0%). This research offers a reliable strategy and promising scheme for highly selective and sensitive detection of illegal additives in complex food matrix via an up-conversion molecularly imprinted ratiometric fluorescent test strip.

Rational Supramolecular Strategy via Halogen Bonding for Effective Halogen Recognition in Molecular Imprinting

Halogen bonding is a highly directional interaction and a potential tool in functional material design through self-assembly. Herein, we describe two fundamental supramolecular strategies to synthesize molecularly imprinted polymers (MIPs) with halogen bonding-based molecular recognition sites. In the first method, the size of the σ-hole was increased by aromatic fluorine substitution of the template molecule, enhancing the halogen bonding in the supramolecule. The second method involved sandwiching hydrogen atoms of a template molecule between iodo substituents, which suppressed competing hydrogen bonding and enabled multiple recognition patterns, improving the selectivity. The interaction mode between the functional monomer and the templates was elucidated by ¹H NMR, ¹³C NMR, X-ray absorption spectroscopy, and computational simulation. Finally, we succeeded in the effective chromatographic separation of diiodobenzene isomers on the uniformly sized MIPs prepared by multi-step swelling and polymerization. The MIPs selectively recognized halogenated thyroid hormones via halogen bonding and could be applied to screening endocrine disruptors.

Selective fluorescent probe for sensitive determination of bisphenol A based on molecularly imprinted polymers decorated carbon dots derived from citric acid and ethylenediamine

Bisphenol A (BPA) is an endocrine disrupting chemical and poses a grave threat to the human health. Herein, a fluorescent probe constructed with molecularly imprinted polymers decorated carbon dots (CDs@MIPs) was proposed for determination of BPA with high selectivity. The CDs@MIPs were constructed using BPA, 4-vinylpyridine and ethylene glycol dimethacrylate as template, functional monomer and cross linker, respectively. The obtained fluorescent probe not only owned a highly selective recognition function derived from MIPs but also displayed an excellent sensitivity for sensing BPA stemmed from CDs. The fluorescence intensity of CDs@MIPs was varied before and after the removal of BPA templates. The fluorescent decrease fraction of the fluorescent probe demonstrates a nice linearity in BPA concentration range of 10-2000 nM (r² = 0.9998) and the detection limit is as low as 1.5 nM. The fluorescent probe was triumphantly utilized to sense the level of BPA in real aqueous and plastic samples with good results. Moreover, the fluorescent probe offered a wonderful means for fast identification and sensitive detection of BPA from environmental aqueous samples.

Self-powered photoelectrochemical aptasensor based on hollow tubular g-C3N4/Bi/BiVO4 for tobramycin detection

A highly sensitive photoelectrochemical aptasensor based on phosphorus-doped hollow tubular g-C₃N₄/Bi/BiVO₄ (PT-C₃N₄/Bi/BiVO₄) for tobramycin (TOB) detecting was developed. This aptasensor is a self-powered sensing system which could generate the electrical output under visible light irradiation with no external voltage supply. Based on the surface plasmon resonance (SPR) effect and unique hollow tubular structure of PT-C₃N₄/Bi/BiVO₄, the PEC aptasensor exhibited an enhanced photocurrent and favorably specific response to TOB. Under the optimized conditions, the sensitive aptasensor presented a wider linearity to TOB in the range of 0.01-50 ng mL^-1 with a low detection limit of 4.27 pg mL^-1. This sensor also displayed a satisfying photoelectrochemical performance with optimistic selectivity and stability. In addition, the proposed aptasensor was successfully applied to the detection of TOB in river water and milk samples.

A highly efficient molecularly imprinted fluorescence sensor for assessing whole wheat grains by the rapid and sensitive detection of alkylresorcinols

To differentiate whole wheat foods from refined wheat foods is still challenging grain industry and confusing consumers. Alkylresorcinols (ARs), as biomarkers of whole wheat grains, can serve for assessing the authenticity of whole wheat foods. Herein, a highly efficient fluorescence sensing platform (CDs@MIP) for rapid and sensitive analysis of ARs was explored, using carbon dots (CDs) as fluorophores and 5-heneicosylresorcinol (C21:0 AR) as template molecules embedded in a molecularly imprinted polymer (MIP) coating. Benefiting from the specific cavities in the probe and a photo-induced electron transfer effect, the fluorescence intensity of CDs@MIP was significantly quenched in the presence of C21:0 AR, exhibiting a superior binding efficiency and selectivity. As a result, the fabricated optical sensor delivered a wide linear range of C21:0 AR from 0.015 to 60 μg mL-1 with an ultralow detection limit of 4 ng mL-1. It was noteworthy that the sensor was successfully applied for the rapid detection of C21:0 AR in commercial whole-wheat foods as well as visualization analysis on the test paper, comprehensively validating the practicality and efficacy of CDs@MIP based fluorescence assay. The study provides a rapid and sensitive detection method of C21:0 AR, paving a new way for guiding grain industry to effectively qualify the authenticity and to quantify the content of whole wheat in wheat-based foods.

Peptide-Based Molecularly Imprinted Polymer: A Visual and Digital Platform for Specific Recognition and Detection of Ethyl Carbamate

A visual and digital platform was constructed by peptide-based molecularly imprinted polymers (PMIPs) for specific recognition and detection of ethyl carbamate (EC). Here, the optosensing core was creatively constructed by the covalent assembly of dipeptides (H-Phe-Phe-OH) and genipin biomolecules for high fluorescence quantum yield and dual-signal response capability. MIPs were wrapped in the shell of the optosensing core for selectivity of EC from actual samples of alcoholic beverages. The genipin-FF nanoparticles (GFPNs)@PMIPs exhibited dual-band red-blue fluorescence image with a low detection limit of 0.817 and 1.65 μg L^-1, respectively, in the optimal linear range of 2-240 μg L^-1. The accuracy of this method was verified by the spiked recovery experiment, and a good recovery from 83.97 to 106.75% of the proposed optosensing method was obtained. In addition, a smartphone application was coupled with GFPNs@PMIPs to realize online real-time detection of EC. With the addition of EC, the color change of G and B values was negligible compared with the R value. This work also provides a potential method for on-site visual detection of analytes.

Effect of Au Nanoparticle Agglomeration on SERS Signal Amplification

An analyzed substance's signal intensity and detection sensitivity in surface-enhanced Raman spectroscopy (SERS) significantly depend on the size and agglomeration degree of nanoparticles (NPs) forming the enhancing structure. Structures were manufactured by aerosol dry printing (ADP), where NPs' agglomeration depends on printing conditions and additional particle modification techniques. The influence of agglomeration degree on SERS signal enhancement was studied in three types of printed structures using the methylene blue model molecule as an analyte. We demonstrated that the ratio between individual NPs and agglomerates in a studied structure strongly affects SERS signal amplification, and structures formed mainly from non-agglomerated NPs enhance the signal better. In this sense, aerosol NPs modified by pulsed laser radiation provide better results than thermally modified NPs, since in laser modification a larger number of individual NPs is observed due to the absence of secondary agglomeration effects in the gas stream. However, increasing gas flow may minimize the secondary agglomeration, since the time allotted for the agglomeration processes is reduced. In this paper, we show how different NPs' agglomeration tendencies influence SERS enhancement to demonstrate the process of using ADP to form inexpensive and highly efficient SERS substrates with huge application potential.

Molecularly Imprinted Polymer-Based Luminescent Chemosensors

Molecularly imprinted polymer (MIP)-based luminescent chemosensors combine the advantages of the highly specific molecular recognition of the imprinting sites and the high sensitivity with the luminescence detection. These advantages have drawn great attention during the past two decades. Luminescent molecularly imprinted polymers (luminescent MIPs) towards different targeted analytes are constructed with different strategies, such as the incorporation of luminescent functional monomers, physical entrapment, covalent attachment of luminescent signaling elements on the MIPs, and surface-imprinting polymerization on the luminescent nanomaterials. In this review, we will discuss the design strategies and sensing approaches of luminescent MIP-based chemosensors, as well as their selected applications in biosensing, bioimaging, food safety, and clinical diagnosis. The limitations and prospects for the future development of MIP-based luminescent chemosensors will also be discussed.

Fluorescence Turn-on of Tetraphenylethylene Derivative by Transfer from Cyclodextrin to Liposomes, HeLa Cells, and E. coli

Herein, trimethyl-β-cyclodextrin (TMe-β-CDx) and γ-cyclodextrin (γ-CDx) could dissolve a tetraphenylethylene derivative (TPE-OH₄ ) in water through high-speed vibration milling. The fluorescence intensity of the TMe-β-CDx-TPE-OH₄ complex was much higher than that of the γ-CDx-TPE-OH₄ complex, as the rotation of the central C=C double bond of TPE-OH₄ after photoactivation was inhibited in a smaller TMe-β-CDx cavity in comparison with the γ-CDx cavity. In contrast, the fluorescence intensity of the γ-CDx-TPE-OH₄ complex was very weak; nevertheless, it increased after the addition of liposomes due to the transfer of TPE-OH₄ from the γ-CDx cavity to the lipid membrane as a "turn-on" phenomenon. Furthermore, to apply temperature sensor, it was demonstrated that the fluorescence intensity in the liposomes depended on the phase-transition temperature. By using the fluorescence turn-on phenomenon, TPE-OH₄ could detect the presence of HeLa cells and E. coli by fluorescence.

Epitope imprinted polymeric materials: application in electrochemical detection of disease biomarkers

Epitope imprinting is a promising method for creating specialized recognition sites that resemble natural biorecognition elements. Epitope-imprinted materials have gained a lot of attention recently in a variety of fields, including bioanalysis, drug delivery, and clinical therapy. The vast applications of epitope imprinted polymers are due to the flexibility in choosing monomers, the simplicity in obtaining templates, specificity toward targets, and resistance to harsh environments along with being cost effective in nature. The "epitope imprinting technique," which uses only a tiny subunit of the target as the template during imprinting, offers a way around various drawbacks inherent to biomacromolecule systems i.e., traditional molecular imprinting techniques with regards to the large size of proteins, such as the size, complexity, accessibility, and conformational flexibility of the template. Electrochemical based sensors are proven to be promising tool for the quick, real-time monitoring of biomarkers. This review unravels epitope imprinting techniques, approaches, and strategies and highlights the applicability of these techniques for the electrochemical quantification of biomarkers for timely disease monitoring. In addition, some challenges are discussed along with future prospective developments.

Efficient Optosensing of Hippuric Acid in the Undiluted Human Urine with Hydrophilic "Turn-On"-Type Fluorescent Hollow Molecularly Imprinted Polymer Microparticles

The development of complex biological sample-compatible fluorescent molecularly imprinted polymers (MIPs) with improved performances is highly important for their real-world bioanalytical and biomedical applications. Herein, we report on the first hydrophilic "turn-on"-type fluorescent hollow MIP microparticles capable of directly, highly selectively, and rapidly optosensing hippuric acid (HA) in the undiluted human urine samples. These fluorescent hollow MIP microparticles were readily obtained through first the synthesis of core-shell-corona-structured nitrobenzoxadiazole (NBD)-labeled hydrophilic fluorescent MIP microspheres by performing one-pot surface-initiated atom transfer radical polymerization on the preformed "living" silica particles and subsequent removal of their silica core via hydrofluoric acid etching. They showed "turn-on" fluorescence and high optosensing selectivity and sensitivity toward HA in the artificial urine (the limit of detection = 0.097 μM) as well as outstanding photostability and reusability. Particularly, they exhibited much more stable aqueous dispersion ability, significantly faster optosensing kinetics, and higher optosensing sensitivity than their solid counterparts. They were also directly used for quantifying HA in the undiluted human urine with good recoveries (96.0%-102.0%) and high accuracy (RSD ≤ 4.0%), even in the presence of several analogues of HA. Such fluorescent hollow MIP microparticles hold much promise for rapid and accurate HA detection in the clinical diagnostic field.

Selective detection of carbendazim using a upconversion fluorescence sensor modified by biomimetic molecularly imprinted polymers

The persistence of carbendazim residues in the food chain poses a potential risk to human health. Therefore, an eco-friendly selective and sensitive fluorescence nanosensor was established for carbendazim determination based on molecularly imprinted polymer (MIP) modified upconversion nanoparticles (UCNPs). The molecularly imprinted coating with methacrylamide as a functional monomer and carbendazim as a template molecule grafted on the UCNPs (UCNPs@MIP) constituted fluorescent recognition elements. The fluorescence emission of UCNPs@MIP significantly declined in the presence of carbendazim due to electron transfer induced by its selective binding with MIP cavities. The quenched fluorescence of UCNPs@MIP was recovered once the template carbendazim was eluted from the probe system. Under the optimized conditions, the proposed method offers a good linear correlation between 0.01 and 1 μg/mL, with a limit of detection (LOD) of 0.0036 μg/mL for carbendazim residues. The analytical utility and reliability of the developed biomimetic platform were examined in real food samples with good recoveries (88.790%∼102.675%) and relative standard deviation (RSD) values (0.491%∼3.779%). The method was further validated by a standard HPLC method in terms of student's t-test (p > 0.05) with no significant differences between the two methods. Hence, the proposed fluorescence sensor has prospects for rapid determination of carbendazim.

Carbon dot-based molecularly imprinted fluorescent nanopomegranate for selective detection of quinoline in coking wastewater

Quinoline, as a refractory and toxic organic pollutant in coking wastewater, causes great harm to the environment and human health even in trace amount. To realize the selective and sensitive detection of quinoline in coking wastewater, a novel molecularly imprinted fluorescent nanopomegranate with carbon dots (CDs) as seeds and fluorescence source (CD-MIP) was prepared, using quinoline as the template, and N-(β-aminoethyl)-γ-aminopropyl trimethoxysilane (KH792) as the monomer. The preparation and detection conditions of CD-MIP were systematically optimized. The structure and detection performance of CD-MIP were investigated in detail. The resulting CD-MIP exhibits excellent photoluminescence performance, high detection sensitivity, good selectivity and reproducibility towards quinoline. Under the optimized conditions, the fluorescence intensity of CD-MIP shows a satisfying linearity with quinoline concentration in the range of 20-200 mg/L with a detection limit of 6.7 mg/L. Owing to the existence of imprinted cavities that highly match with quinoline, a high imprinting factor (3.46) for CD-MIP was obtained. In addition, CD-MIP represents a greater affinity towards quinoline than towards other analogues, as well as an outstanding anti-interference capability. For trace analysis in real coking wastewater, CD-MIP also gives satisfactory results. Therefore, CD-MIP shows promising application in the selective detection of trace quinoline in wastewater.

Recent Advances in Molecularly Imprinted Polymers for Antibiotic Analysis

The abuse and residues of antibiotics have a great impact on the environment and organisms, and their determination has become very important. Due to their low contents, varieties and complex matrices, effective recognition, separation and enrichment are usually required prior to determination. Molecularly imprinted polymers (MIPs), a kind of highly selective polymer prepared via molecular imprinting technology (MIT), are used widely in the analytical detection of antibiotics, as adsorbents of solid-phase extraction (SPE) and as recognition elements of sensors. Herein, recent advances in MIPs for antibiotic residue analysis are reviewed. Firstly, several new preparation techniques of MIPs for detecting antibiotics are briefly introduced, including surface imprinting, nanoimprinting, living/controlled radical polymerization, and multi-template imprinting, multi-functional monomer imprinting and dummy template imprinting. Secondly, several SPE modes based on MIPs are summarized, namely packed SPE, magnetic SPE, dispersive SPE, matrix solid-phase dispersive extraction, solid-phase microextraction, stir-bar sorptive extraction and pipette-tip SPE. Thirdly, the basic principles of MIP-based sensors and three sensing modes, including electrochemical sensing, optical sensing and mass sensing, are also outlined. Fourthly, the research progress on molecularly imprinted SPEs (MISPEs) and MIP-based electrochemical/optical/mass sensors for the detection of various antibiotic residues in environmental and food samples since 2018 are comprehensively reviewed, including sulfonamides, quinolones, β-lactams and so on. Finally, the preparation and application prospects of MIPs for detecting antibiotics are outlined.