An ultrasensitive signal-on electrochemical aptasensor for ochratoxin A determination based on DNA controlled layer-by-layer assembly of dual gold nanoparticle conjugates

Recent advances towards point-of-care devices for fungal detection: Emphasizing the role of plasmonic nanomaterials in current and future technologies

Fungal infections are a significant global health problem, particularly affecting individuals with weakened immune systems. Moreover, as uncontrolled antibiotic and immunosuppressant use increases continuously, fungal infections have seen a dramatic increase, with some strains developing antibiotic resistance. Traditional approaches to identifying fungal strains often rely on morphological characteristics, thus owning limitations, such as struggles in identifying several strains or distinguishing between fungal strains with similar morphologies. This review explores the multifaceted impact of fungi infections on individuals, healthcare providers, and society, highlighting the often-underestimated economic burden and healthcare implications of these infections. In light of the serious constraints of traditional fungal identification methods, this review discusses the potential of plasmonic nanoparticle-based biosensors for fungal infection identification. These biosensors can enable rapid and precise fungal pathogen detection by exploiting several readout approaches, including various spectroscopic techniques, colorimetric and electrochemical assays, as well as lateral-flow immunoassay methods. Moreover, we report the remarkable impact of plasmonic Lab on a Chip technology and microfluidic devices, as they recently emerged as a class of advanced biosensors. Finally, we provide an overview of smartphone-based Point-of-Care devices and the associated technologies developed for detecting and identifying fungal pathogens.

A Polyamidoamine-Based Electrochemical Aptasensor for Sensitive Detection of Ochratoxin A

Sensitive detection of ochratoxin A (OTA) is significant and essential because OTA may pose risks to human and animal health. Here, we developed an electrochemical aptasensor for OTA analysis using polyamidoamine (PAMAM) dendrimers as a signal amplifier. As a carrier, PAMAM has numerous primary amino groups that can be coupled with thiolated complementary strand DNA (cDNA), allowing it to recognize aptamers bound to the surface of horseradish peroxidase (HRP)-modified gold nanoparticles (AuNPs), thereby improving the sensitivity of the aptasensor. When monitoring the positive samples, OTA was captured by the aptamer fixed on the HRP-conjugated AuNP surface by specific recognition, after which the formed OTA-aptamer conjugates were detached from the electrode surface, ultimately decreasing the electrochemical signal monitored by differential pulse voltammetry. The novel aptasensor achieved a broad linear detection range from 5 to 105 ng L-1 with a low detection limit of 0.31 ng L-1. The proposed aptasensor was successfully applied for OTA analysis in red wine, with recovery rates ranging from 94.15 to 106%. Furthermore, the aptasensor also exhibited good specificity and storage stability. Therefore, the devised aptasensor represents a sensitive, practical and reliable tool for monitoring OTA in agricultural products, which can also be adapted to other mycotoxins.

Recent Advances in Recognition Receptors for Electrochemical Biosensing of Mycotoxins-A Review

Mycotoxins are naturally occurring toxic secondary metabolites produced by fungi in cereals and foodstuffs during the stages of cultivation and storage. Electrochemical biosensing has emerged as a rapid, efficient, and economical approach for the detection and quantification of mycotoxins in different sample media. An electrochemical biosensor consists of two main units, a recognition receptor and a signal transducer. Natural or artificial antibodies, aptamers, molecularly imprinted polymers (MIP), peptides, and DNAzymes have been extensively employed as selective recognition receptors for the electrochemical biosensing of mycotoxins. This article affords a detailed discussion of the recent advances and future prospects of various types of recognition receptors exploited in the electrochemical biosensing of mycotoxins.

Impedance Technique-Based Label-Free Electrochemical Aptasensor for Thrombin Using Single-Walled Carbon Nanotubes-Casted Screen-Printed Carbon Electrode

An impedance technique-based aptasensor for the detection of thrombin was developed using a single-walled carbon nanotube (SWCNT)-modified screen-printed carbon electrode (SPCE). In this work, a thrombin-binding aptamer (TBA) as probe was used for the determination of thrombin, and that was immobilized on SWCNT through π-π interaction. In the presence of thrombin, the TBA on SWCNT binds with target thrombin, and the amount of TBA on the SWCNT surface decreases. The detachment of TBA from SWCNT will be affected by the concentration of thrombin and the remaining TBA on the SWCNT surface can be monitored by electrochemical methods. The TBA-modified SWCNT/SPCE sensing layer was characterized by cyclic voltammetry (CV). For the measurement of thrombin, the change in charge-transfer resistance (R_ct) of the sensing interface was investigated using electrochemical impedance spectroscopy (EIS) with a target thrombin and [Fe(CN)₆]^3- as redox maker. Upon incubation with thrombin, a decrease of R_ct change was observed due to the decrease in the repulsive interaction between the redox marker and the electrode surface without any label. A plot of R_ct changes vs. the logarithm of thrombin concentration provides the linear detection ranges from 0.1 nM to 1 µM, with a ~0.02 nM detection limit.

Nanomaterial-based aptamer biosensors for ochratoxin A detection: a review

Ochratoxin A (OTA) is a widely distributed mycotoxin that often contaminates food, grains and animal feed. It poses a serious threat to human health because of its high toxicity and persistence. Therefore, the development of an inexpensive, highly sensitive, accurate and rapid method for OTA detection is imperative. In recent years, various nanomaterials used in the establishment of aptasensors have attracted great attention due to their large surface-to-volume ratio, good stability and facile preparation. This review summarizes the development of nanomaterial-based aptasensors for OTA determination and sample treatment over the past 5 years. The nanomaterials used in OTA aptasensors include metal, carbon, luminescent, magnetic and other nanomaterials. Finally, the limitations and future challenges in the development of nanomaterial-based OTA aptasensors are reviewed and discussed.

A switchable electrochemical hairpin-aptasensor for ochratoxin A detection based on the double signal amplification effect of gold nanospheres

An OTA electrochemical sensor based on h-DNA and the double effect of gold nanospheres that can be applied for actual sample detection.

A novel electrochemical aptasensor based on layer-by-layer assembly of DNA-Au@Ag conjugates for rapid detection of aflatoxin M1 in milk samples

Aflatoxin M₁ (AFM₁) is a common toxin in dairy products that causes acute and chronic human health disorders. Thus, the development of a rapid and accurate AFM₁ detection method is of vital importance for food safety monitoring. This work was to develop a novel electrochemical aptasensor for sensitive and specific determination of AFM_1. The dendritic-like nanostructure was formed on the gold electrode surface by layer-by-layer assembly of gold-silver core-shell nanoparticles modified with DNA conjugates. In the presence of AFM₁, the specific recognition between AFM₁ and Apt caused the disassociation of the DNA controlled dual Au@Ag conjugates from the surface of the electrode, causing less methylene blue to bind to the surface and weakening the electrochemical signal. The more AFM₁ there is, the weaker the electrochemical signal. Transmission electron microscope results showed that the successfully synthesized Au@Ag nanoparticles exhibited a core-shell structure with Au as core and Ag as shell, and their average diameter was about 30 nm. Under optimal conditions, the electrochemical aptasensor showed a wide detection ranging from 0.05 ng mL^-1 to 200 ng mL^-1, and a low detection limit of 0.02 ng mL^-1. Moreover, the proposed strategy has been successfully applied to the detection of AFM₁ in cow, goat, and sheep milk samples with satisfactory recoveries ranging from 91.10% to 104.05%. This work can provide a novel rapid detection method for AFM₁, and also provide a new sensing platform for the detection of other toxins.

Aptamer-based diagnostic and therapeutic approaches in animals: Current potential and challenges

Fast and precise diagnosis of infectious and non-infectious animal diseases and their targeted treatments are of utmost importance for their clinical management. The existing biochemical, serological and molecular methods of disease diagnosis need improvement in their specificity, sensitivity and cost and, are generally not amenable for being used as points-of-care (POC) device. Further, with dramatic changes in environment and farm management practices, one should also arm ourselves and prepare for emerging and re-emerging animal diseases such as cancer, prion diseases, COVID-19, influenza etc. Aptamer – oligonucleotide or short peptides that can specifically bind to target molecules – have increasingly become popular in developing biosensors for sensitive detection of analytes, pathogens (bacteria, virus, fungus, prions), drug residues, toxins and, cancerous cells. They have also been proven successful in the cellular delivery of drugs and targeted therapy of infectious diseases and physiological disorders. However, the in vivo application of aptamer-mediated biosensing and therapy in animals has been limited. This paper reviews the existing reports on the application of aptamer-based biosensors and targeted therapy in animals. It also dissects the various modifications to aptamers that were found to be successful in in vivo application of the aptamers in diagnostics and therapeutics. Finally, it also highlights major challenges and future directions in the application of aptamers in the field of veterinary medicine.

Recent Achievements in Electrochemical and Surface Plasmon Resonance Aptasensors for Mycotoxins Detection

Mycotoxins are secondary metabolites of fungi that contaminate agriculture products. Their release in the environment can cause severe damage to human health. Aptasensors are compact analytical devices that are intended for the fast and reliable detection of various species able to specifically interact with aptamers attached to the transducer surface. In this review, assembly of electrochemical and surface plasmon resonance (SPR) aptasensors are considered with emphasis on the mechanism of signal generation. Moreover, the properties of mycotoxins and the aptamers selected for their recognition are briefly considered. The analytical performance of biosensors developed within last three years makes it possible to determine mycotoxin residues in water and agriculture/food products on the levels below their maximal admissible concentrations. Requirements for the development of sample treatment and future trends in aptasensors are also discussed.

Fabrication of an ultrasensitive aptasensor for precise electrochemical detection of the trace amounts of streptomycin in milk

Designing a sensitive method for the detection of streptomycin residues in animal products is essential for controlling consumer health risk. In this study, a high-purity pencil lead graphite electrode coated with inner graphene layers and outer surface-adsorbed gold nanoparticles attached to streptomycin-specific thiolated aptamer was used as an electrochemical aptasensor. The aptasensor electrode fabrication steps were investigated by scanning electron microscope (SEM) and Fourier-transform infrared spectrophotometer (FTIR). Moreover, aptasensor performance during fabrication and binding of aptamer to streptomycin were investigated by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) methods. After the binding of sreptomycin to it's specific aptamer as a component of the aptasensor a decrease in the current and an increase in the charge transfer resistance (R_ct) were recorded using the above-mentioned techniques. Under optimal conditions, the novel ultra-sensetive designed aptansensor detects streptomycin in the range of  10^-8 to  10^-16 M with a LOD of 0.8×10^-18 M. The aptansensor demonstrates a high selectivity, good reproducibility and acceptable stability for the specific detection of streptomycin. According to the results, the manufactured aptansensor is a fast, low-cost, highly sensitive and selective device and thus the aptasensor can detect the trace amounts of streptomycin in milk in dairy industries.

Recent Advances in Conventional Methods and Electrochemical Aptasensors for Mycotoxin Detection

The presence of mycotoxins in foodstuffs and feedstuffs is a serious concern for human health. The detection of mycotoxins is therefore necessary as a preventive action to avoid the harmful contamination of foodstuffs and animal feed. In comparison with the considerable expense of treating contaminated foodstuffs, early detection is a cost-effective way to ensure food safety. The high affinity of bio-recognition molecules to mycotoxins has led to the development of affinity columns for sample pre-treatment and the development of biosensors for the quantitative analysis of mycotoxins. Aptamers are a very attractive class of biological receptors that are currently in great demand for the development of new biosensors. In this review, the improvement in the materials and methodology, and the working principles and performance of both conventional and recently developed methods are discussed. The key features and applications of the fundamental recognition elements, such as antibodies and aptamers are addressed. Recent advances in aptasensors that are based on different electrochemical (EC) transducers are reviewed in detail, especially from the perspective of the diagnostic mechanism; in addition, a brief introduction of some commercially available mycotoxin detection kits is provided.

Electrochemical Biosensors in Food Safety: Challenges and Perspectives

Safety and quality are key issues for the food industry. Consequently, there is growing demand to preserve the food chain and products against substances toxic, harmful to human health, such as contaminants, allergens, toxins, or pathogens. For this reason, it is mandatory to develop highly sensitive, reliable, rapid, and cost-effective sensing systems/devices, such as electrochemical sensors/biosensors. Generally, conventional techniques are limited by long analyses, expensive and complex procedures, and skilled personnel. Therefore, developing performant electrochemical biosensors can significantly support the screening of food chains and products. Here, we report some of the recent developments in this area and analyze the contributions produced by electrochemical biosensors in food screening and their challenges.

Graphene-nucleic acid biointerface-engineered biosensors with tunable dynamic range

Programmed biosensors with tunable quantification range and sensitivity would greatly broaden their application in medical diagnosis, food safety and environmental analysis. Herein, we proposed a graphene-nucleic acid biointerface-engineered biosensor, allowing target molecules to be detected with adjustable dynamic ranges and sensitivities. The biosensors were programmed by simply tuning the poly A tail of aptamer probes. The tuning of the poly A tail would allow the interaction between aptamer probes and graphene oxide (GO) to be modulated, in turn programing the competitive binding processes of aptamer probes to target molecules and GO. The biosensors, termed affinity-tunable aptasensors (atAptasensors) could be easily tuned with different dynamic ranges by using aptamer probes with different tail lengths, and the dynamic range could be extended to be over 3 orders by a combined use of multiple aptamer probes. Remarkably, the specificity of aptamer probes could be increased by increasing the interaction between aptamer probes and GO. Reliability of atAptasensor for ATP detection was tested in serum and milk samples, and we also applied atAptasensor for culture-independent analysis of microorganism pollution.

Label-Free and Highly-Sensitive Detection of Ochratoxin A Using One-Pot Synthesized Reduced Graphene Oxide/Gold Nanoparticles-Based Impedimetric Aptasensor

Ochratoxin A (OTA) primarily obtained by the genera aspergillus and penicillium, is one of the toxic substances for different organs and systems of the human body such as the kidney, liver, neurons and the immune system. Moreover, it is considered to cause tumors and fetal malformation even at a very low concentration. Fast and sensitive assay for detection of OTA at ultralow levels in foods and agricultural products has been an increasing demand. In this study, a new label-free electrochemical biosensor based on three-dimensional reduced graphene oxide/gold nanoparticles/aptamer for OTA detection was constructed. The 3D-rGO/Au NPs nanocomposites were firstly synthesized using a one-pot hydrothermal process under optimized experimental conditions. The 3D-rGO/Au NPs with considerable particular surface area and outstanding electrical conductivity was then coated on a glass carbon electrode to provide tremendous binding sites for -SH modified aptamer via the distinctive Au-S linkage. The presence of OTA was specifically captured by aptamer and resulted in electrochemical impedance spectroscopy (EIS) signal response accordingly. The constructed impedimetric aptasensor obtained a broad linear response from 1 pg/mL to 10 ng/mL with an LOD of 0.34 pg/mL toward OTA detection, highlighting the excellent sensitivity. Satisfactory reproducibility was also achieved with the relative standard deviation (RSD) of 1.393%. Moreover, the proposed aptasensor obtained a good recovery of OTA detection in red wine samples within the range of 93.14 to 112.75% along with a low LOD of 0.023 ng/mL, indicating its applicability for OTA detection in real samples along with economical, specific, susceptible, fast, easy, and transportable merits.

Aptasensors for mycotoxin detection: A review

Mycotoxins are toxic compounds produced by fungi, which represent a risk to the food and feed supply chain, having an impact on health and economies. A high percentage of feed samples have been reported to be contaminated with more than one type of mycotoxin. Systematic, cost-effective and simple tools for testing are critical to achieve a rapid and accurate screening of food and feed quality. In this review, we describe the various aptamers that have been selected against mycotoxins and their incorporation into optical and electrochemical aptasensors, outlining the strategies exploited, highlighting the advantages and disadvantages of each approach. The review also discusses the different materials used and the immobilization methods employed, with the aim of achieving the highest sensitivity and selectivity.

Self-assembly of a polythymine embedded activatable molecular beacon for one-step quantification of terminal deoxynucleotidyl transferase activity

We describe an isothermal, single-reaction, and one-step method for signal-on quantification of terminal deoxynucleotidyl transferase (TdT) activity based on the periodic elongation and assembly of polythymine embedded activatable molecular beacon (PTA-MB) into DNA nanostructures. PTA-MB is easily designed according to the rule of the conventional molecular beacon (MB) but engineered with a polyT composed loop. Upon exposure to the specific target TdT, the MB is first elongated with an adenine-rich (A-rich) long chain so that it can then act as the anchoring substrate to capture many original PTA-MBs along its strand. Their unfolding contributes to preliminary fluorescence emission. Significantly, the assembled PTA-MBs can also be elongated and hybridized with residual free PTA-MBs for the second round of signal amplification. Accordingly, multiple rounds of elongation, assembly, and activation of initial PTA-MBs can lead to the formation of DNA nanostructures and induce a dramatically enhanced fluorescence signal for qualitative and quantitative evaluation of TdT activity. The final assay indicated a limit of detection (LOD) of 0.042 U mL^-1 TdT and showed excellent selectivity for TdT versus other common enzymes. Moreover, the practical applicability was validated by direct/absolute quantification of TdT in real biological specimens and accurate monitoring of the activity of TdT pretreated by low/high temperature and heavy metal ions. These findings demonstrated that this functional PTA-MB and its unique assembly behavior is most likely to promote the study of oligonucleotide probe-based DNA assembly, providing a reliable, convenient, and universal platform for precise and point-of-care monitoring of various biomolecules.

Dual Triple Helix-Aptamer Probes for Mix-and-Read Detecting Antibiotics in Fish and Milk

Antibiotic abuse in agricultural products leads to serious food safety issues. To this end, we proposed a mix-and-read and enzyme-free amplified assay for antibiotics based on a dual triple helix-aptamer probe, potentially applicable for on-site monitoring of antibiotic residues. A dual triple helix-aptamer probe can leverage the response toward target molecules without enzyme-based amplification, rendering it sensitive and robust for profiling target molecules. The proposed assay allowed mix-and-read detection of chloramphenicol with a detection limit of 0.18 nM. Besides, it accommodated for specifically resolving chloramphenicol among other antibiotics. Chloramphenicol residual in aquatic products in fish and milk can be precisely determined. Thus, the aptamer probe deems to enrich the toolbox for managing antibiotic use.

Surface-Confined Building of Au@Pt-Centered and Multi-G-Quadruplex/Hemin Wire-Surrounded Electroactive Super-nanostructures for Ultrasensitive Monitoring of Morphine

Overuse and abuse of morphine (MOP), one of the main components of pericarpium papaveris, have attracted increasing attention in the medical field owing to its pharmacological and toxicological activity. Herein, we proposed a new electrochemical nano-biosensor for MOP detection based on surface-confined building of Au@Pt-centered and multi-G-quadruplex/hemin wire-surrounded electroactive super-nanostructures. The center Au@Pt was flower-shaped and irregularly protruded, allowing substantial loading of multiple G-quadruplex wire/hemin complexes on its surface to accomplish the assembly of electroactive super-nanostructures. Interestingly, as the super-nanostructures were closely confined on the electrode surface, a significantly amplified electrochemical signal was thus obtained in the absence of MOP. In contrast, the introduction of target MOP can induce an intense competitive effect and strongly destroy the assembly process, resulting in the reduction of the electrochemical response that is correlated with the logarithmic concentration of MOP. Under optimal conditions, the electrochemical nano-biosensor is capable of highly sensitive detection of MOP in a dynamic concentration range from 1 ppt to 500 ppb. The limit of detection is achieved as low as 0.69 ppt, and the practical application was confirmed by examining MOP from chafing dish condiments. We expect the electrochemical platform utilizing this unique nanoarchitecture to provide rational guidelines to design high-performance analytical tools.

Gold nanoparticle-engineered electrochemical aptamer biosensor for ultrasensitive detection of thrombin

In order to obtain a lower detection limit in electrochemical detection, the choice of signal amplification strategy is of great importance. In this work, we describe an electrochemical sandwich aptasensor based on a signal amplification system involving two thrombin (TB) aptamers (TBA1 and TBA2), gold nanoparticles (AuNPs) as aptamer carriers, and [Ru(NH₃)₆]³⁺ for signal conversion. In the presence of the target thrombin, TBA1 and TBA2 specifically bind to TB, and the TBA1-TB-TBA2 complexes cause the formation of a sandwich structure, meaning more [Ru(NH₃)₆]³⁺ can be adsorbed on the negatively charged phosphate backbone of the aptamers, resulting in an increase in the differential pulse voltammetry (DPV) current. Under optimal conditions, the aptasensor exhibited a linear range of 1 fM to 6 pM and a limit of detection of 0.1429 fM (S/N = 3) for TB. The proposed aptasensor displayed an excellent selectivity and reproducibility. Importantly, the aptasensor was capable of detecting TB in serum samples successfully.

Directly profiling intact Staphylococcus aureus in water and foods via enzymatic cleavage aptasensor

Staphylococcus aureus (S. aureus) causes serious food-borne diseases, and tools able to directly profile intact S. aureus would greatly facilitate food safety and public health. Herein, we proposed a biosensing platform for culture-independent and separation-free profiling S. aureus, thus allow us to directly detect intact S. aureus in complex samples. The binding protection effect of aptamer-cell complex was introduced to construct the aptasensor, and it allowed to eliminate the optimization of aptamer probe sequences. The proposed aptasensor, terms enzymatic cleavage aptasensor could achieve a sensitive (a detection limit of 64 CFU/mL) and broad-concentration quantification (dynamic range 10²-10⁷ CFU/mL) of S. aureus. Furthermore, it could specifically identify intact S. aureus in complex samples, and the quantifying of S. aureus was achieved in tap water, milk and porker with high precision. Therefore, enzymatic cleavage aptasensor could be a good candidate for on-site biosensing platform of S. aureus, as well as other pathogens by replacing the aptamer sequences.

Ultrasensitive detection of ochratoxin A based on biomimetic nanochannel and catalytic hairpin assembly signal amplification

In this paper, an ultrasensitive nanochannel sensor has been proposed for label-free Ochratoxin A (OTA) assay in combination with graphene oxide (GO) and catalyzed hairpin assembly (CHA). The high-performance sensor is segmented into two parts. One is composed of graphene oxide (GO) and DNA probes. In the presence of target OTA, OTA works as a catalyst to trigger the self-assembly pathway of the two probes and initiate the cycling of CHA circuits, which results in numerous double-stranded DNAs (dsDNA) in solution. The excess ssDNA probes are removed by GO. The other part is composed of biomimetic nanochannel coated with polyethyleneimine (PEI) and Zr⁴⁺, which can quantify the concentration of OTA by detecting the dsDNA in solution. The nanofluidic device has a detection limit of as low as 6.2 pM with an excellent selectivity. The nanochannel based assay was used to analyse food samples (red wine) with satisfied results. Thus, the proposed analytical method will provide a new approach the detection of OTA and can be applied for quality control to ensure food safety.

Recent advances in nanocomposite-based electrochemical aptasensors for the detection of toxins

Toxins are one of the major threatening factors to human and animal health, as well as economic growth. There is therefore an urgent demand from various communities to develop novel analytical methods for the sensitive detection of toxins in complex matrixes. Among the as-developed toxin detection strategies, nanocomposite-based aptamer sensors (termed as aptasensors) show tremendous potential for combating toxin pollution; in particular electrochemical (EC) aptasensors have received significant attention because of their unique advantages, including simplicity, rapidness, high sensitivity, low cost and suitability for field-testing. This paper reviewed the recently published approaches for the development of nanocomposite-/nanomaterial-based EC aptasensors for the detection of toxins with high assaying performance, and their potential applications in environmental monitoring, clinical diagnostics, and food safety control by summarizing the detection of different types of toxins, including fungal mycotoxins, algal toxins and bacterial enterotoxins. The effects of nanocomposite properties on the detection performance of EC aptasensors have been fully addressed for supplying readers with a comprehensive understanding of their improvement. The current technical challenges and future prospects of this subject have also been discussed.

Recent Advances in Ochratoxin A Electrochemical Biosensors: Recognition Elements, Sensitization Technologies, and Their Applications

Ochratoxin A (OTA) is a class of mycotoxin that are mainly produced by Aspergillus and Penicillium and widely found in plant origin food. OTA-contaminated foods can cause serious harm to animals and humans, while high stability of OTA makes it difficult to remove in conventional food processing. Thus, sensitive and rapid detection of OTA undoubtedly plays an important role in OTA prevention and control. In this paper, the conventional and novel methods of OTA at home and abroad are summarized and compared. The latest research progress and related applications of novel OTA electrochemical biosensors are mainly described with a new perspective. We innovatively divided the recognition element into single and combined recognition elements. Specifically, signal amplification technologies applied to the OTA electrochemical aptasensor are proposed. Furthermore, summary of the current limitations and future challenges in OTA analysis is included, which provide reference for the further research and applications.

Electrochemical aptasensors based on the gold nanostructures

Electrochemical aptasensors as novel diagnostic tools have attracted sufficient research interest in biomedical sciences. In this review, recent leading trends about gold (Au) nanostructures based electrochemical aptasensors have been collected, reviewed, and compared. Here, the considered electrochemical aptasensors were categorized based on the analytes and diagnostic techniques. Pharmaceutical analytes and biomolecules were reviewed in a separate section consisting of a variety of antibiotics, analgesics, and other biomolecules. Various aptasensors have also measured toxins, ions, and hazardous chemicals, and the findings of them have also been reviewed. Many aptasensors have been designed to detect different disease biomarkers that will play an essential role in the future of early diagnosis of diseases. Pathogen microorganisms have been considered as the analyte in several designed electrochemical aptasensors in recent researches, and their results have been reviewed and discussed as another section. Important aspects considered in the review of the mentioned aptasensors were the type of analyte, features of the aptamer as the biorecognition element, type of Au nanostructures, diagnostic technique, diagnostic mechanism, detection range and the limit of detection (LOD). In the last section, an in-depth analysis has been provided based on the crucial features of all included aptasensors.

A review: Recent advances in ultrasensitive and highly specific recognition aptasensors with various detection strategies

One of the most studied topics in analytical chemistry and physics is to develop bio-sensors. Aptamers are small single-stranded RNA or DNA oligonucleotides (5-25 kDa), which have advantages in comparison to their antibodies such as physicochemical stability and high binding specificity. They are able to integrate with proteins or small molecules, including intact viral particles, plant lectins, gene-regulation factor, growth factors, antibodies and enzymes. The aptamers have reportedly shown some unique characteristics, including long shelf-life, simple modification to provide covalent bonds to material surfaces, minor batch variation, cost-effectiveness and slight denaturation susceptibility. These features led important efforts toward the development of aptamer-based sensors, known as apta-sensors classified into optical, electrical and mass-sensitive based on the signal transduction mode. This review provided a number of current advancements in selecting, development criteria, and aptamers application with the focus on the effect of apta-sensors, specifically for disease-associated analyses. The review concentrated on the current reports of apta-sensors that are used for evaluating different food and environmental pollutants.

Multicolor colorimetric detection of ochratoxin A via structure-switching aptamer and enzyme-induced metallization of gold nanorods

Colorimetric aptasensors have been intensively studied for the ochratoxin A (OTA) detection, but they mostly exhibit just one-color change, resulting in poor visual resolution and limited use for semi-quantitative analysis. Thus, we designed a high-resolution colorimetric assay on the basis of aptamer structural switching and enzyme-induced metallization of gold nanorods (AuNRs). DNA-alkaline phosphatase (ALP)-immobilized magnetic beads were prepared. The aptamer bounded to OTA to form G-quadruplexes, releasing ALP-labelled complementary DNA (cDNA-ALP). After magnetic separation, cDNA-ALP catalyzed the decomposition of ascorbic acid 2-phosphate to ascorbic acid that reduced Ag⁺, forming an Ag shell on the surface of AuNRs. This caused a blue-shift of the longitudinal local surface plasmon resonance peak of the AuNRs and a naked eye visible multicolor change. Under optimal conditions, the assay exhibited a 9.0 nM detection limit for OTA, with high specificity. This method is promising for the on-site visual semi-quantitative detection of mycotoxins in foods.

Engineering Multivalence Aptamer Probes for Amplified and Label-Free Detection of Antibiotics in Aquatic Products

Excessive use of antibiotics in aquatic products is a serious problem for food safety and human health, and on-site detection of antibiotics is highly demanded. Herein, we proposed multivalence aptamer probes, allowing sensitive, label-free, and homogeneous detection of antibiotics in different aquatic products. Compared to commonly used aptamers, multivalence aptamer probes can provide multiple binding sites and a higher affinity for target molecules, and the iterative binding on different binding sites contributes to an amplified recognition effect, sharply increasing the response and sensitivity of aptamer probes. The 2-valence aptamer probes conferred a limit of detection of 0.097 nM for kanamycin detection, where it is estimated that their sensitivity is enhanced 12 times compared to 1-valence aptamer probes. Meanwhile, multivalence aptamer probes allowed us to specifically identify kanamycin among other antibiotics. It could detect kanamycin residual in aquatic products including river eel and puffer fish, as well as tap water with high precision. A multivalence design strategy of aptamer probes would significantly improve the detection performance of aptamers, facilitating the translation of aptamer for food safety control.

Graphene/aptamer probes for small molecule detection: from in vitro test to in situ imaging

Small molecules are key targets in molecular biology, environmental issues, medicine and food industry. However, small molecules are challenging to be detected due to the difficulty of their recognition, especially in complex samples, such as in situ in cells or animals. The emergence of graphene/aptamer probes offers an excellent opportunity for small molecule quantification owing to their appealing attributes such as high selectivity, sensitivity, and low cost, as well as the potential for probing small molecules in living cells or animals. This paper (with 130 refs.) will review the application of graphene/aptamer probes for small molecule detection. We present the recent progress in the design and development of graphene/aptamer probes enabling highly specific, sensitive and rapid detection of small molecules. Emphasis is placed on the success in their development and application for monitoring small molecules in living cells and in vivo systems. By discussing the key advances in this field, we wish to inspire more research work of the development of graphene/aptamer probes for both on-site or in situ detection of small molecules and its applications for investigating the functions of small molecules in cells in a dynamic way. Graphical abstract Graphene/aptamer probes can be used to construct different platforms for detecting small molecules with high specificity and sensitivity, both in vitro and in situ in living cells and animals.

Simultaneous electrochemical determination of ochratoxin A and fumonisin B1 with an aptasensor based on the use of a Y-shaped DNA structure on gold nanorods

A complementary DNA (cDNA) was designed to simultaneously hybridize with the ochratoxin A (OTA) aptamer and the fumonisin B1 (FB1) aptamer to form a unique Y-shaped DNA structure and to achieve simultaneous detection. Gold nanorods (AuNRs) were used to immobilize thionine (Th), thiolated ferrocene (Fc), thiolated OTA aptamer (Apt1), and thiolated FB1 aptamer (Apt2), to form an amplified signal element and a recognition element. The Apt1-AuNRs-Th complex and the Apt2-AuNRs-Fc complex hybridize with cDNA to form a unique Y-DNA structure on a gold electrode. This produces two initial electrochemical signals [with 177 μΑ cm^-2 near -0.2 V, and 3121 μΑ cm^-2 near +0.46 V (vs. Ag/AgCl)] by differential pulse voltammetry. Upon addition of 0.1 ng mL^-1 OTA and 0.1 ng mL^-1 FB1, the aptamers bind the two toxins. This results in the release of Apt1-AuNRs-Th and Apt2-AuNRs-Fc, so the peak currents densities decrease to 115 μΑ cm^-2 and 209 μΑ cm^-2. The assay allows simultaneous determination of OTA and FB1 in the 1.0 pg·mL^-1 to 100 ng·mL^-1 concentration ranges, with LODs of 0.47 and 0.26 pg·mL^-1. The assay is reproducible, stable and specific. It was applied to the determination of OTA and FB1 in spiked beer, with recoveries between 89.0% and 102.0%. Graphical abstractSchematic representation of OTA and FB₁ detection based on Apt₂-AuNRs-Fc/Apt₁-AuNRs-Th/cDNA/AuE. (AuNRs: Gold nanorods; Th: thionine; Fc: ferrocene; SH: thiol; BSA: Bovine serum albumin; cDNA: Complementary DNA; Apt₁: Aptamer1; Apt₂: Aptamer2; OTA: Ochratoxin A; FB₁: Fumonisin B₁).

Challenges in Electrochemical Aptasensors and Current Sensing Architectures Using Flat Gold Surfaces

In recent years, reagentless aptamer biosensors, named aptasensors, have shown significant advancements. Particularly, electrochemical aptasensors could change the field of biosensors in this era, where digitalization seems to be a common goal of many fields. Biomedical devices are integrating electronic technologies for detecting pathogens, biomolecules, small molecules, and ions, and the physical-chemical properties of nucleic acid aptamers makes them very interesting for these devices. Aptamers can be easily synthesized and functionalized with functional groups for immobilization and with redox chemical groups that allow for the conversion of molecular interactions into electrical signals. Furthermore, non-labeled aptamers have also been utilized. This review presents the current challenges involved in aptasensor architectures based on gold electrodes as transducers.

What Electrochemical Biosensors Can Do for Forensic Science? Unique Features and Applications

This article critically discusses the latest advances in the use of voltammetric, amperometric, potentiometric, and impedimetric biosensors for forensic analysis. Highlighted examples that show the advantages of these tools to develop methods capable of detecting very small concentrations of analytes and provide selective determinations through analytical responses, without significant interferences from other components of the samples, are presented and discussed, thus stressing the great versatility and utility of electrochemical biosensors in this growing research field. To illustrate this, the determination of substances with forensic relevance by using electrochemical biosensors reported in the last five years (2015–2019) are reviewed. The different configurations of enzyme or affinity biosensors used to solve analytical problems related to forensic practice, with special attention to applications in complex samples, are considered. Main prospects, challenges to focus, such as the fabrication of devices for rapid analysis of target analytes directly on-site at the crime scene, or their widespread use and successful applications to complex samples of interest in forensic analysis, and future efforts, are also briefly discussed.

Amplified oxygen reduction signal at a Pt-Sn-modified TiO2 nanocomposite on an electrochemical aptasensor

In this work, a metallic composite with strong electrocatalytic property was designed by uniformly decorating Pt and Sn nanoparticles on the surface of TiO₂ nanorods (Pt-Sn@TiO₂). A detection scheme was then developed based on a dual signal amplification strategy involving the Pt-Sn@TiO₂ composite and exonuclease assisted target recycling. The Pt-Sn@TiO₂ composite exhibited an enhanced oxygen reduction current owing to the synergistic effect between Pt and Sn, as well as high exposure of Pt (111) crystal face. Initially, a Pt-Sn@TiO₂ modified glassy carbon electrode produced an amplified electrochemical signal for the reduction of dissolved oxygen in the analyte solution. Next, a DNA with a complementary sequence to a streptomycin aptamer (cDNA) was immobilised on the Pt-Sn@TiO₂ modified electrode, followed by the streptomycin aptamer that hybridised with cDNA. The corresponding oxygen reduction current was diminished by 51% attributable to the hindrance from the biomolecules. After a mixture of streptomycin and RecJ_f exonuclease was introduced, both the streptomycin-aptamer complex and the cDNA were cleaved from the electrode, making the Pt-Sn and Pt (111) surface available for oxygen reduction. RecJ_f would also release streptomycin from the streptomycin-aptamer complex, allowing it to complex again with aptamers on the electrode. This has then promoted a cyclic amplification of the oxygen reduction current by 85%, which is quantitatively related to streptomycin. Under optimal conditions, the aptasensor exhibited a linear range of 0.05-1500 nM and a limit of detection of 0.02±0.0045 nM streptomycin. The sensor was then used in the real-life sample detection of streptomycin to demonstrate its potential applications to bioanalysis.

Three-dimensional nitrogen-doped mesoporous carbon nanomaterials derived from plant biomass: Cost-effective construction of label-free electrochemical aptasensor for sensitively detecting alpha-fetoprotein

We synthesized three kinds of nitrogen-doped nanoporous carbon nanomaterials (represented by N-mC) through a cost-effective method, that is, pyrolysis of plant biomasses (grass, flower, and peanut shells). We further explored their potential as sensitive bioplatforms for electrochemical label-free aptasensors to facilitate the early detection of alpha-fetoprotein (AFP). Chemical structure characterizations revealed that rich functional groups coexisted in as-synthesized N-mC nanomaterials, such as C-C, C-O, C=O, C-N, and COOH. Among the three kinds of N-mC nanomaterials, the one derived from grass (N-mC_g) exhibited the lowest carbon defect degree, the highest I_D/I_G ratio in the Raman spectra, and the largest specific surface area (186.2 m² g^-1). Consequently, N-mC_g displayed excellent electrochemical activity and strong affinity toward aptamer strands, further endowing the corresponding aptasensor with sensitive detection ability for AFP. Electrochemical impedance spectroscopy (EIS) and differential pulse voltammetry (DPV) were used to investigate the whole detection procedure for AFP. The EIS and DPV results showed that the fabricated N-mC_g-based aptasensor possessed an extremely low limit of detection of 60.8 and 61.8 fg·mL^-1 (s/n = 3), respectively, for detecting AFP within a wide linear range from 0.1 pg mL^-1 to 100 ng mL^-1. Moreover, the aptasensor displayed acceptable selectivity and applicability, high reproducibility, and excellent stability in serum samples of cancer patients. Therefore, the proposed cost-effective and label-free strategy based on the nitrogen-doped nanoporous carbon derived from plant biomass is a promising approach for the early detection of various tumor markers.

Primer remodeling amplification-activated multisite-catalytic hairpin assembly enabling the concurrent formation of Y-shaped DNA nanotorches for the fluorescence assay of ochratoxin A

DNA can be configured into unique high-order structures due to its significantly high programmability, such as a three-way junction-based structure (denoted Y-shaped DNA), for further applications. Herein, we report a label-free fluorescent signal-on biosensor based on the target-driven primer remodeling rolling circle amplification (RCA)-activated multisite-catalytic hairpin assembly (CHA) enabling the concurrent formation of Y-shaped DNA nanotorches (Y-DNTs) for ultrasensitive detection of ochratoxin A (OTA). Two kinds of masterfully-designed probes, termed Complex I and II, were pre-prepared by the combination of a circular template (CT) with an OTA aptamer (S1), a substrate probe (S2) and hairpin probe 1 (HP1), respectively. Target OTA specifically binds to Complex I, resulting in the release of the remnant element in S2 and successive remodeling into a mature primer for RCA by phi29 DNA polymerase, thus a usable primer-CT complex is produced, which actuates primary RCA. Then, numerous Complex II probes can anneal with the first-generation RCA product (RP) with multiple sites to activate the CHA process. With the participation of endonuclease IV (Endo IV) and phi29, HP1 as a pre-primer containing a tetrahydrofuran abasic site mimic (AP site) in Complex II is converted into a mature primer to initiate additional rounds of RCA. So, countless Y-DNTs are formed concurrently containing a G-quadruplex structure that enables the N-methylmesoporphyrin IX (NMM) to be embedded, generating remarkably strong fluorescence signals. The biosensor was demonstrated to enable rapid and accurate highly efficient and selective detection of OTA with an improved detection limit of as low as 0.0002 ng mL^-1 and a widened dynamic range of over 4 orders of magnitude. Meanwhile, this method was proven to be capable of being used to analyze actual samples. Therefore, this proposed strategy may be established as a useful and practical platform for the ultrasensitive detection of mycotoxins in food safety testing.

Electrochemical Immuno- and Aptasensors for Mycotoxin Determination

Modern analysis of food and feed is mostly focused on development of fast and reliable portable devices intended for field applications. In this review, electrochemical biosensors based on immunological reactions and aptamers are considered in the determination of mycotoxins as one of most common contaminants able to negatively affect human health. The characteristics of biosensors are considered from the point of view of general principles of bioreceptor implementation and signal transduction providing sub-nanomolar detection limits of mycotoxins. Moreover, the modern trends of bioreceptor selection and modification are discussed as well as future trends of biosensor development for mycotoxin determination are considered.