Versatile photoelectrochemical and electrochemiluminescence biosensor based on 3D CdSe QDs-DNA nanonetwork-SnO2 nanoflower coupled with DNA walker amplification for HIV detection

Visual detection of ochratoxin a based on GPE-PET bipolar electrode-electrochemiluminescence platform

A GPE-PET (graphene-polyethylene terephthalate) bipolar electrode-electrochemiluminescence (BPE-ECL) platform was developed for ochratoxin A (OTA) detection. PET served as the electrode sheet substrate, and GPE was drop-coated onto the surface of PET to form a conductive line. On the functional sensing interface, the thiol (-SH) modified OTA aptamer (OTA-Aptamer) are fixed on the surface of the gold-plated cathode through AuS bonds. The efficient electron transfer ability of methylene blue (MB) made the anode ECL signal strong. Due to competition between OTA and MB with OTA-Aptamer, leading to a decrease in ECL intensity of the [Ru(bpy)3]2+/TPA system on the BPE anode. Under optimized conditions, the GPE-PET BPE-ECL biosensor displayed superior sensitivity for OTA with a detection limit of 2 ng mL-1 and a wide linear concentration range of 5-100 ng mL-1. This method could be further applied to detect various toxins and had broad application prospects.

Signal amplification strategies in photoelectrochemical sensing of carcinoembryonic antigen

Early detection of cancer markers is critical for cancer diagnosis and cancer therapy since these markers may indicate cancer risk, incidence, and disease prognosis. Carcinoembryonic antigen (CEA) is a type of non-specific and broad-spectrum cancer biomarker commonly utilized for early cancer diagnosis. Moreover, it serves as an essential tool to assess the efficacy of cancer treatment and monitor tumor recurrence as well as metastasis, thus garnering significant attention for precise and sensitive CEA detection. In recent years, photoelectrochemical (PEC) techniques have emerged as prominent methods in CEA detection due to the advantages of PEC, such as simple equipment requirements, cost-effectiveness, high sensitivity, low interference from background signals, and easy of instrument miniaturization. Different signal amplification methods have been reported in PEC sensors for CEA analysis. Based on these, this article reviews PEC sensors based on various signal amplification strategies for detection of CEA during the last five years. The advantages and drawbacks of these sensors were discussed, as well as future challenges.

A portable smartphone detection of ctDNA using MnB2 nanozyme and paper-based analytical device

The development of point-of-care testing (POCT) for circulating tumor DNA (ctDNA) is meaningful for the non-invasive cancers screening and diagnosis, particularly in resource-limited settings. The microfluidic paper-based analytical device (μPAD) provides an ideal platform, its application in ctDNA assays remains underexplored. In this work, a multifunctional μPAD was manufactured, which can enhance the efficiency and reduce the cost of ctDNA sensing. Additionally, a smartphone-based application analysis was fabricated for convenient, portable detection and colorimetric signal readout. Moreover, the novel oxidase-like MnB2 nanozyme was introduced in the sandwiches sensing strategy, utilizing its catalytic properties to effectively generate a colorimetric signal. The use of MnB2 nanozyme in sensing application is relatively novel, and its catalytic performance and mechanism was thoroughly evaluated via experiment and density functional theory (DFT) calculations. After optimizing the detection conditions, the proposed biosensor exhibited satisfactory results. Furthermore, the method was successfully used to detect ctDNA in tumor cell lysates and peripheral blood samples from tumor-bearing mice. The results were consistent with standard qPCR method, affirming the reliability of our POCT analysis device in ctDNA detection. Thus, this work not only provides a paper-based POCT device and intelligent analysis tool for portable cancers diagnosis, but it also paves a new application path for MnB2 nanozyme in the sensing filed.

Dual-mode photoelectrochemical radar based on CdS quantum dot and Ce-MOF for detection of low-abundance disease-associated proteins

Herein, we developed a convenient and versatile dual-mode electrochemiluminescence (ECL) and photoelectrochemistry (PEC) sensing radar for the detection of Prostate-specific antigen (PSA), which has important implications for detection of low-abundance disease-associated proteins. Cerium-based metal-organic framework (Ce-MOFs) were firstly modified on the electrode, showing well ECL and PEC property. In particular, a unique multifunctional Au@CdS quantum dots (QDs) probe loaded numerous QDs and antibody was fabricated, not only displaying strong ECL and PEC signals, but also having specific recognition to PSA. After the signal probe was linked to the electrode by immune reaction, much amplified signals of ECL and PEC were generated for double-mode detection of PSA. Therefore, this work proposed a multifunctional Au@CdS QDs signal probe with excellent ECL and PEC performance, and developed an ultrasensitive photoelectric biosensing platform for dual-mode detection, which provides an effective method for health monitoring of cancer patients.

Three-dimensional DNA nanomachine biosensor coupled with CRISPR Cas12a cascade amplification for ultrasensitive detection of carcinoembryonic antigen

The detection of carcinoembryonic antigen (CEA) holds significant importance in the early diagnosis of cancer. However, current methods are hindered by limited accessibility and specificity. This study proposes a rapid and convenient Cas12a-based assay for the direct detection of CEA in clinical serum samples, aiming to address these limitations. The protocol involves a rolling machine operation, followed by a 5-min Cas12a-mediated cleavage process. The assay demonstrates the capability to detect human serum with high anti-interference performance and a detection limit as low as 0.2 ng/mL. The entire testing procedure can be accomplished in 75 min without centrifugation steps, and successfully reduced the limit of detection of traditional DNA walking machine by 50 folds. Overall, the testing procedure can be easily implemented in clinical settings.

Ultrasensitive electrochemiluminescence biosensor based on dual quenching effects of silver nanoclusters and multiple cycling amplification for detection of ATP

In this work, an electrochemiluminescence (ECL) biosensor based on dual ECL quenching effects of silver nanoclusters (Ag NCs) and multiple cycling amplification was designed to achieve ultrasensitive detection of ATP. The specific recognition of target ATP to aptamer initiated multiple cycling amplification, and a small amount of target was converted into a large number of DNA product chains (S1) by amplification. After S1 opened hairpin DNA 2 (HP2), Ag NCs approached the surface of CdS quantum dots (QDs) modified-electrode by complementary DNA, resulting in a significant decrease of ECL intensity from CdS QDs. The quenching principle is as follows. Firstly, the absorption spectrum of Ag NCs overlaps well with the ECL emission spectrum of CdS QDs, leading to effective ECL resonance energy transfer (ECL-RET); Secondly, Ag NCs could catalyze electrochemical reduction of K2S2O8, leading to consumption of ECL co-reactant and reducing ECL of QDs. The double-ECL quenching achieved ultrasensitive biosensing detection of ATP with a wide range from 1 aM to 1 pM. This present work reported new principle of double-quenching QDs ECL by Ag NCs, and developed a novel ECL biosensor by combining with multiple cycle amplification technique, which has great contribution to the development of QDs ECL and biosensing applications.

MOF-derived sandwich-structured dual Z-Scheme Co9S8@ZnIn2S4/CdSe hollow nanocages heterojunction: Target-induced ultrasensitive photoelectrochemical sensing of chlorpyrifos

Exploring efficient photoactive material presents an intriguing opportunity to enhance the analytical performance of photoelectrochemical (PEC) sensor in the environmental analysis. In this work, a sandwich-structured multi-interface Co9S8@ZnIn2S4/CdSe QDs dual Z-Scheme heterojunction, derived from metal-organic framework (MOF), was synthesized as a sensing platform for chlorpyrifos detection, by integrating with enzyme-induced in situ insoluble precipitates strategy. The meticulously designed Co9S8@ZnIn2S4/CdSe QDs exhibited enhanced charge separation efficiency and was proved to be a highly effective sensing platform for the immobilization of biomolecules, attributing to the intrinsic dual Z-Scheme heterojunction and the distinctive hollow structure. The proposed PEC sensing platform combined with enzyme-induced in situ precipitate signal amplification strategy achieved superior performance for sensing of chlorpyrifos (CPF), showing in wide linear range (1.0 pg mL-1-100 ng mL-1), with a limit of detection (0.6 pg mL-1), excellent selectivity, and stability. This work offers valuable insights for the design of novel advanced photoactive materials aimed at detecting environmental pollutants with low level concentration.

An original strategy and evaluation of a reaction mechanism for recovering valuable metals from zinc oxide dust containing intractable germanide

A novel leaching-roasting-leaching strategy was used to recover valuable metals from zinc oxide dust containing intractable germanide. In the ultrasonic enhanced oxidation leaching stage, potassium permanganate and ultrasonication were introduced to strengthen the dissolution of sulphide. During the roasting stage, sodium carbonate and magnesium nitrate were added to promote the reaction between the insoluble tetrahedral germanium dioxide and complex forms of germanium-containing compounds. Simultaneously, the sulphur produced in the ultrasonic enhanced oxidation leaching stage was used to change the phases of tin dioxide and zinc ferrite, thereby releasing germanium into its lattice. Finally, the germanium in the roasting slag was recovered by conventional leaching, and the grades of lead and tin in the residue were enriched to 35.21% and 11.31%, respectively. Compared with the conventional acid leaching process of enterprise, the total reaction time of this method was shortened to 80 min, and the recovery rates of zinc and germanium increased by approximately 10% and 40%, respectively. The entire process is clean and environmentally friendly and does not cause adverse effects on the recovery of lead and tin. Overall, this study provides new insights into the design of valuable metal recovery methods for zinc oxide dust containing intractable germanide.

Fe Single-Atom Carbon Dots Nanozyme Collaborated with Nucleic Acid Exonuclease III-Driven DNA Walker Cascade Amplification Strategy for Circulating Tumor DNA Detection

Circulating tumor DNA (ctDNA), as a next-generation tumor marker, enables early screening and monitoring of cancer through noninvasive testing. Exploring the development of new methods for ctDNA detection is an intriguing study. In this work, a unique electrochemical biosensor for the ctDNA detector was constructed in the first utilizing Fe single-atom nanozymes-carbon dots (SA Fe-CDs) as a signaling carrier in collaboration with a DNA walker cascade amplification strategy triggered by nucleic acid exonuclease III (Exo III). The electrochemical active surface area of AuNPs/rGO modified onto a glassy carbon electrode (AuNPs/rGO/GCE) was about 1.43 times that of a bare electrode (bare GCE), with good electrical conductivity alongside a high heterogeneous electron transfer rate (5.81 × 10-3 cm s-1), that is, as well as the ability to load more molecules. Sequentially, the DNA walker cascade amplification strategy driven by Exo III effectively converted the target ctDNA into an amplified biosignal, ensuring the sensitivity and specificity of ctDNA. Ultimately, the electrochemical signal was further amplified by introducing SA Fe-CDs nanozymes, which could serve as catalysts for 3,3',5,5'-tetramethylbenzidine (TMB) oxidation with facile responding (Vmax = 0.854 × 10-6 M s-1) and robust annexation (Km = 0.0069 mM). The integration of the triple signal amplification approach achieved detection limits as low as 1.26 aM (S/N = 3) for a linearity spanning from 5 aM to 50 nM. In this regard, our proposal for a biosensor with exceptional assay properties in complicated serum environments had great potential for early and timely diagnosis of cancer.

Ultrasensitive solid-state electrochemiluminescence sensor based on lotus root shaped carbon fiber, CdSe QDs and Fe3O4 synergically amplify Ru(bpy)32+ luminophore signal for detection of cyfluthrin

An efficient and innovative electrochemiluminescence (ECL) sensor was developed for trace detection of cyfluthrin. The sensor utilized materials such as lotus root shaped carbon fiber (Co CNFs), cadmium selenide quantum dots (CdSe QDs), and Fe3O4 to amplify Ru(bpy)32+ signals. Co CNFs, with its large specific surface area and porosity, served the purpose of not only enhancing the stability of the sensor by fixing CdSe QDs and Ru(bpy)32+ on the Co CNFs/GCE, but also facilitating electron transfer. CdSe QDs was involved in the luminescence reaction and collaborated with Ru(bpy)32+ to enhance the sensor's sensitivity, while Fe3O4 promoted electron transfer in the system due to its large surface area. The solid-state ECL sensor achieved satisfactory signal under the synergistic action of these components. The ECL signal of the sensor was quenched by cyfluthrin, and a favorable linear relationship was observed between the sensor and cyfluthrin in the concentration range 1 × 10-12 to 1 × 10-6 M. The detection limit of the sensor was 3.3 × 10-13 M (S/N = 3). The utilization of lotus root shaped carbon fiber, CdSe QDs, and Fe3O4 in the Ru(bpy)32+ system demonstrated a synergistic effect for cyfluthrin detection, presenting a new approach for the rapid determination analysis of pesticide residues in foods.

Construction of an ultrasensitive dual-mode chiral molecules sensing platform based on molecularly imprinted polymer modified bipolar electrode

Chiral molecules are abundant in nature. Phenylketonuria (PKU) is caused by the abnormal transformation of chiral molecules L-phenylalanine (L-Phe) in the human blood, which can cause irreversible harm to the human body. In this work, we documented an electrochemiluminescent (ECL) dual-mode sensor platform based on molecularly imprinted polymer (MIP) modified closed bipolar electrodes for high sensitivity detection of L-Phe and D-phenylalanine (D-Phe). In the anode chamber of a bipolar electrode modified with phenylalanine imprinting, Ru (bpy)32+ underwent a redox reaction to produce a chemiluminescence response under the stimulation of a driving voltage. At the same time, the reduction of the cathode film of the bipolar electrode was promoted, and the color changed from dark blue to nearly white. Thus, the dual-mode detection of target molecules is realized. The detection range of the sensor for phenylalanine reached 0.01-10,000 nM, and the detection limits of L-Phe and D-Phe were 3.9 pM and 4.6 pM (S/N = 3), respectively. This dual-mode system achieved high stability and high specificity, and also successfully realized the detection of actual samples, which is expected to achieve future clinical applications.

Versatile photoelectrochemical biosensor based on AIS/ZnS QDs sensitized-WSe2 nanoflowers coupled with DNA nanostructure probe for"On-Off"assays of TNF-α and MTase

Herein, a novel multifunctional photoelectrochemical (PEC) biosensor based on AgInS2 (AIS)/ZnS quantum dots (QDs) sensitized-WSe2 nanoflowers and DNA nanostructure signal probe was designed to achieve ultra-sensitive "On-Off" detection of human tumor necrosis factor α (TNF-α) and methylase Dam MTase (MTase). AIS/ZnS QDs as an excellent photosensitive material was found to match WSe2 in energy level for the first time, and the photocurrent signal after sensitization was 65 times that of WSe2 nanoflowers and 17.9 times that of AIS/ZnS QDs. Moreover, abundant AIS/ZnS QDs were loaded on the TiO2 nanoparticles with good conductivity by DNA to fabricate a multifunctional probe, which can not only amplify signal but also specifically recognize target. When target TNF-α was present, the AIS/ZnS QDs signal probe was attached to the WSe2 nanoflowers-modified electrode through binding to aptamer, and the amplified PEC signal was generated for "on" assay of TNF-α. Furthermore, Dam MTase as second target induced methylation of hairpin HDam, so it is cleaved by the endonuclease DpnI, resulting in the shedding of AIS/ZnS QDs signal probe for signal "off" detection of MTase. This work opened a new photosensitized probe and developed a promising PEC biosensor for dual-targets assay. By programming the DNA nanostructure, the biosensor can detect versatile targets in a simple and sensitive method, which has good practical application value in human serum.

Preparation of Yb-Sb co-doped Ti/SnO2 electrode for electrocatalytic degradation of sulfamethoxazole (SMX)

To efficiently break down residual sulfonamide antibiotics in environmental water, Yb-Sb co-doped Ti/SnO2 electrodes were fabricated using a solvothermal method. The effect of different amounts of Yb doping on the properties of the electrodes was studied. When the atom ratio of Sn: Yb is 100 : 7.5 in the preparation, the as-obtained coral-like electrodes (denoted as Yb 7.5%) possessed the smallest diameter of spherical particles on the surfaces, to result in the denser surface, highest electrocatalytic activity and smallest resistance of the electrode. As anode for electrocatalytic degradation of sulfamethoxazole, the Yb 7.5% electrode showed a degradation rate of 92% in 90 min, which was much higher than that of Yb 0% electrode (62.7% degradation rate). The electrocatalytic degradation of sulfamethoxazole was investigated with varying current densities and initial concentrations. Results indicated that the degradation process followed pseudo-first-order kinetics, and the degradation rate constants for Yb 7.5% and Yb 0% electrodes were 0.0278 min-1 and 0.0114 min-1, respectively. Furthermore, the service life of Ti/SnO2 electrodes was significantly improved after Yb doping, as demonstrated by accelerated life testing. Yb 7.5% exhibited a service life that was 2.7 times longer than that of Yb 0%. This work offers a new approach to construct Yb-Sb co-doped Ti/SnO2 electrodes with excellent electrooxidation activity and high stability for the electrochemical oxidation degradation of sulfamethoxazole.

Spherical nucleic acids-based nanoplatforms for tumor precision medicine and immunotherapy

Precise diagnosis and treatment of tumors currently still face considerable challenges due to the development of highly degreed heterogeneity in the dynamic evolution of tumors. With the rapid development of genomics, personalized diagnosis and treatment using specific genes may be a robust strategy to break through the bottleneck of traditional tumor treatment. Nevertheless, efficient in vivo gene delivery has been frequently hampered by the inherent defects of vectors and various biological barriers. Encouragingly, spherical nucleic acids (SNAs) with good modularity and programmability are excellent candidates capable of addressing traditional gene transfer-associated issues, which enables SNAs a precision nanoplatform with great potential for diverse biomedical applications. In this regard, there have been detailed reviews of SNA in drug delivery, gene regulation, and dermatology treatment. Still, to the best of our knowledge, there is no published systematic review summarizing the use of SNAs in oncology precision medicine and immunotherapy, which are considered new guidelines for oncology treatment. To this end, we summarized the notable advances in SNAs-based precision therapy and immunotherapy for tumors following a classification standard of different types of precise spatiotemporal control on active species by SNAs. Specifically, we focus on the structural diversity and programmability of SNAs. Finally, the challenges and possible solutions were discussed in the concluding remarks. This review will promote the rational design and development of SNAs for tumor-precise medicine and immunotherapy.

A multifunctional electrochemiluminescence and photoelectrochemical biosensor based on a quantum dot ion-exchange reaction for two-channel detection of thrombin

Herein, a multifunctional electrochemiluminescence (ECL) and photoelectrochemical (PEC) biosensor based on exchange of Ag+ with CdTe QDs was developed for dual-mode detection of thrombin. First, CdTe QDs assembled on an electrode displayed superior ECL and PEC signals. At the same time, C-rich hairpin (HP) DNA linked to silicon spheres loaded a large amount of Ag+, and the specific binding of thrombin to an aptamer led to the release of DNA P; then, DNA P interacted with HP DNA to produce numerous Ag+ ions by an enzyme-digestion amplification reaction. Ag+ underwent ion exchange with CdTe QDs to generate AgTe/CdTe QDs, resulting in much reversed PEC and changed ECL signals for dual-mode detection of thrombin. This work takes advantage of outstanding multi-signals of QDs coupled with convenient ion exchange to achieve multi-mode detection of the target, avoiding false positive or false negative signals generated in the traditional detection process, and thus can be used for the rapid detection of various biomolecules in actual samples.

Ultrasensitive MicroRNA Photoelectric Assay Based on a Mimosa-like CdS-NiS/Au Schottky Junction

Seeking and constructing superior photoactive materials have the potential to improve the performance of photoelectrochemical (PEC) biosensors. In this work, we proposed a novel mimosa-like ternary inorganic composite with a significantly enhanced light-harvesting ability and photogenerated carrier separation rate. This ternary photoactive material was obtained via electrodeposition of gold nanoparticles (Au) on the surface of transition metal sulfide composite of CdS and NiS (CdS-NiS/Au). The experimental results showed that the high initial photocurrent was acquired on CdS-NiS/Au (68-fold higher than that of individual CdS) with the synergistic effect of p-n heterojunction, Schottky junction, and the eminent optical properties of gold nanoparticles. Meanwhile, using silver nanoclusters prepared by link DNA protection as an effective quencher, integrating the duplex-specific nuclease-assisted rolling circle amplification strategy, a "Signal ON" PEC biosensor was fabricated for the detection of microRNA 21 (miRNA 21). With the release of the quencher, the recovered photocurrent is able to achieve determination of miRNA 21 within the range from 10 aM to 1 pM with a detection limit down to 4.6 aM (3σ). Importantly, this work not only provides a superb idea for designing ternary inorganic heteromaterials with exceptional photoactive ability but also allows the detection of other biomarkers by selecting appropriate recognition units.

C-doped ZnO nanocomposites molecularly imprinted photoelectrochemical sensor for ultrasensitive and selective detection of oxytetracycline in milk

Antibiotic monitoring remains vital to ensure human health and safety in the environment and foods. As the most popular detection method, photoelectrochemical (PEC) sensor can achieve rapid and accurate detection of antibiotics with the advantages of high sensitivity, easy-to-preparation process, as well as high selectivity. Herein, an extremely-efficient visible-light responsible ZnO/C nanocomposite was prepared and combined with acetylene black (as an enhanced conductive matrix), and the electron migration efficiency was greatly accelerated. Meanwhile, a molecularly imprinted polymer obtained by electrical agglomeration was conjugated as a specific recognizing site for target. Furthermore, the as-prepared rMIP-PEC sensor showed a low detection limit (8.75 pmol L^-1, S/N = 3) in a wide linear detection range of 0.01-1000 nmol L^-1 for oxytetracycline (OTC), with excellent selectivity and long-term stability. Our work shed light on applying C-doped ZnO semiconductor and molecularly imprinted polymer as photoelectric active sensing materials for rapid and accurate analysis of antibiotics in foods and environment.

Multifunctional Photoelectrochemical Biosensor Based on ZnIn2S4/ZnS QDs@Au-Ag-Reversed Photocurrent of Cu-Metal-Organic Framework Coupled with CRISPR/Cas-12a-Shearing for Assay of Dual Targets

False positives and negatives in bioanalytical assays remain a persistent problem. Herein, a multifunctional photoelectrochemical (PEC) biosensor based on ZnIn₂S₄ (ZIS)/ZnS quantum dots (QDs)@Au-Ag-reversed photocurrent of Cu-metal-organic framework (MOF) coupled with CRISPR/Cas-12a-shearing was innovatively developed for assay of dual targets. First, Cu-MOF as a good PEC material shows cathodic photocurrent. Then, numerous ZIS/ZnS QDs were assembled to the Au-Ag nanoparticles (NPs) to prepare a stable and highly amplified signal probe, which can just match the energy level of Cu-MOFs and realized the polarity-reversed photocurrent of Cu-MOF for the first time. As the empty-core nanostructure of Au-Ag NPs has a high specific surface area and low material density, the bimetallic nanocrystal can much increase the reaction rate and improve the redox efficiency. When target CEA-produced cDNA opened the hairpin DNA (HP1 DNA) on the electrode, the ZIS/ZnS QDs@Au-Ag signal probe was conjugated to the electrode via DNA hybridization, achieving a significantly reversed PEC current for CEA detection. Moreover, the specific binding of kanamycin/aptamer generated the acDNA (activator), which can activate the trans-cleavage activity of the CRISPR-CAS12a system on ssDNA, so the signal probe was sheared and caused the obvious decrease of PEC signal for kanamycin detection. The newly developed ZIS/ZnS QDs@Au-Ag NPs displayed excellent PEC properties and reversed photocurrent to MOF and were combined with the unique CRISPR-Cas12a system to achieve sensitive detection of dual targets, which can open a new polarity-reversed PEC sensing platform for rapid and accurate analysis of multiple targets and can effectively avoid false positives results in clinical testing.

Versatile FeMoOv nanozyme bipolar electrode electrochemiluminescence biosensing and imaging platform for detection of H2O2 and PSA

In this work, a unique FeMoOv nanozyme-bipolar electrode (NM-BPE) electrochemiluminescence (ECL) biosensing and imaging platform was proposed for the first time to realize sensitive detection of target hydrogen peroxide (H₂O₂) and prostate specific antigen (PSA). Considering the advantage that the cathode and anode poles of the bipolar electrode (BPE) can be modified respectively, this work was carried out using anode equipped with ECL reagent bipyridine ruthenium (Ru(bpy)₃²⁺), and cathode equipped with the Fe-doped molybdenum oxide/Au nanoparticles (FeMoOv/AuNPs) with excellent peroxidase (POD) and catalase (CAT)-like activity. Because FeMoOv/AuNPs show efficient enzyme catalysis effect and can greatly promote the decomposition of H₂O₂, thus the electron transfer rate in the NM-BPE system would be much accelerated to enhance the ECL signal of Ru(bpy)₃²⁺. Based on this principle, this work not only realized sensitive detection of H₂O₂, but also ingeniously designed an sandwich immunosensor using FeMoOv/AuNPs as recognition probe to mediate the ECL response on the anode, achieving highly sensitive detection of PSA. Furthermore, a unique mobile phone ECL imaging system was developed for assay of PSA at different concentrations, which opened a new portable imaging sensing device for bioassays. This work was the first time to combine nanozymes with bipolar electrodes for ECL analysis and imaging, which not only broadened the applications of nanozymes, but also pioneered the new joint ECL research technique of bipolar electrode and ECL imaging in bioassays, showing great application prospect for multiple detection of proteins, nucleic acids and cancer cells.

Plasmonic Array at the Liquid-Liquid Interface: A Dual-Mode Optical Sensing Platform for Multianalytes

Analyte-triggered nanoparticle (NP) assemblies in bulk colloidal suspension have been extensively utilized in various optical sensors. Nevertheless, the assembling process is still limited by the slow diffusion dynamics of NPs and the low concentration of analytes in trace detections, which hinders further improvement of the sensitivity and repeatability of the sensors. In this work, by functionalizing the gold NPs with specific ligands, we constructed a dual-mode optical sensing platform for multianalytes based on the plasmonic NP array at the liquid-liquid interface. Through emulsification, the NP diffusion kinetics are boosted for several orders, and the NPs are condensed from the bulk aqueous phase to the liquid-liquid interface as a plasmonic array. The as-formed metasurface generates major reflectance and surface-enhanced Raman scattering changes in response to analytes, providing two optical sensing modes. As prototypes, cysteine and glucose are selected as the target molecules, achieving the limit of detection as 193 ± 2 and 297 ± 12 pM, respectively.

Recent trends and advancements in electrochemiluminescence biosensors for human virus detection

Researchers are constantly looking to find new techniques of virus detection that are sensitive, cost-effective, and accurate. Additionally, they can be used as a point-of-care (POC) tool due to the fact that the populace is growing at a quick tempo, and epidemics are materializing greater often than ever. Electrochemiluminescence-based (ECL) biosensors for the detection of viruses have become one of the most quickly developing sensors in this field. Thus, we here focus on recent trends and developments of these sensors with regard to virus detection. Also, quantitative analysis of various viruses (e.g., Influenza virus, SARS-CoV-2, HIV, HPV, Hepatitis virus, and Zika virus) with a specific interest in Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) was introduced from the perspective of the biomarker and the biological receptor immobilized on the ECL-based sensors, such as nucleic acids-based, immunosensors, and other affinity ECL biosensors.

Designing inorganically functionalized magic-size II-VI clusters and unraveling their surface states

Surface engineering is a critical step in the functionalization of nanomaterials to improve their optical and electrochemical properties. However, this process remains a challenge in II-VI magic-size clusters (MSCs) due to their high sensitivity to the environment. Herein, we developed a general surface modification strategy to design all-inorganic MSCs by using certain metal salts (cation = Zn2+, In3+; Anion = Cl-, NO3 -, OTf-) and stabilized (CdS)34, (CdSe)34 and (ZnSe)34 MSCs in polar solvents. We further investigated the surface states of II-VI MSCs using electrochemiluminescence (ECL). The mechanism study revealed that the ECL emission was attributed to . Two ECL emissions at 556 nm and 530 nm demonstrated two surface passivation modes on (CdS)34 MSCs, which can be tuned by the surface ligands. The achievement of surface engineering opens a new design space for functional MSC compounds.

Highly Sensitive Photoelectrochemical Biosensor for MicroRNA-21 Based on a Dumbbell-Shaped Heterostructure AuNRs@end-TiO2 Combined with Carbon Dots as Photosensitizers and Duplex-Specific Nuclease-Assisted Signal Amplification

TiO₂ was grown on both ends of gold nanorods (AuNRs) to form a dumbbell-shaped heterostructure (called AuNRs@end-TiO₂) first, and then assembled on the fluorine tin oxide (FTO) electrode surface through hydrophobic interactions to construct a concise photoelectrochemical microRNA-21 (miRNA-21, model target) biosensor using carbon dots (CDs) as photosensitizers. Hairpin probes (HPs) were fixed on the AuNRs@end-TiO₂-modified FTO electrode surface through the Au-S bond, and CDs-modified complementary DNA (CDs-cDNA) served as photosensitive probes. In the presence of the target, miRNA hybridized with the HP and triggered double-strand-specific nuclease to cleave the complementary part of the HP with miRNA, and miRNA was released, which can trigger another cycle to realize signal amplification. Many HPs were cleaved and the complementary sequence with cDNA was exposed, which can capture the photosensitive probes to the electrode surface and resulted in photocurrent enhancement. The photocurrent intensity system has a linear relationship with the logarithm of the miRNA concentration in the range of 0.1 fM to 100 pM with a low detection limit of 96 aM (S/N = 3). The biosensor has high sensitivity, good selectivity, and good reproducibility and shows satisfactory results in actual sample detection.

Photoelectrochemical biosensing platform based on in situ generated ultrathin covalent organic framework film and AgInS2 QDs for dual target detection of HIV and CEA

In this work, a new photoelectrochemical (PEC) biosensing platform based on an ordered two-dimensional (2D) ultrathin covalent organic framework (COF) film and AgInS₂ quantum dots (QDs) has been developed to enable dual-target detection of HIV and CEA. The porous COF film was firstly in situ generated on ITO, displaying super-stable and intense photocurrent with excellent repeatability. Moreover, an effective PEC quenching probe was specifically designed by loading large number of AgInS₂ QDs on Au nanoparticles (NPs). After target HIV-induced cyclic amplification process to generate abundant DNA S0, the Au NPs-AgInS₂ QDs probe was binded to the COF film through DNA hybridization, enabling PEC signal of the COF film to turn "off" for ultra-sensitive detection of HIV. Furthermore, when CEA as the second target specifically binded to its aptamer, the Au NPs-AgInS₂ QDs quenching probe was released, achieving PEC signal "on" of the T-DA COF film for ultra-sensitive detection of CEA. This work opened a unique 2-D COF film-based PEC biosensing platform with excellent signal for rapid detection of dual targets, which can effectively avoid false positives and negatives and shows promising application for early prevention and detection of cancer diseases.

Dual-Mechanism Quenching of Electrochemiluminescence Immunosensor Based on a Novel ECL Emitter Polyoxomolybdate-Zirconia for 17β-Estradiol Detection

The exploration of novel electrochemiluminescence (ECL) reagents has been a breakthrough work in ECL immunoassay. In this work, the ECL properties of polyoxomolybdate-zirconia (POM-ZrO₂) were discovered for the first time and their luminescence mechanism was initially explored. Virgulate POM-ZrO₂ was synthesized from phosphomolybdic acid hydrate and zirconium oxychloride by solvothermal method, which achieved intense and stabilized cathode ECL emission at a negative potential. Polyaniline@Au nanocrystals (PANI@AuNPs) as the executor of the dual-mechanism quenching strategy were used to reduce the output signal. The quenching efficiency was significantly enhanced by the dual mechanisms of ECL energy transfer and electron transfer. Specifically, PANI@AuNPs can serve as an energy receptor to absorb the energy emitted by POM-ZrO₂ (energy donor), while the appropriate energy level can be regarded as the condition for electron transfer to quench the ECL intensity of POM-ZrO₂. Herein, the proposed dual-mechanism quenching strategy was applied to the immunoassay of 17β-estradiol by constructing a competitive immunosensor. As expected, the immunosensor demonstrated favorable analytical performance and a wide sensing range from 0.01 pg/mL to 200 ng/mL. Hence, it provides a novel method for the sensitive analysis of other biomolecules, such as disease markers and environmental estrogens.

Nucleic acid isothermal amplification-based soft nanoarchitectonics as an emerging electrochemical biosensing platform

The emergence of nucleic acid isothermal amplification strategies based on soft nanoarchitectonics offers a new dimension to the traditional electrochemical technique, particularly because of its flexibility, high efficiency, and increased sensitivity for analytical applications. Various DNA/RNA isothermal amplification strategies have been developed for the design and fabrication of new electrochemical biosensors for efficient and important biomolecular detection. Herein, we provide an overview of recent efforts in this research field and the strategies for signal-amplified sensing systems, with their biological applications, current challenges and prospects in this promising new area.

A double reaction system induced electrochemiluminescence enhancement based on SnS2 QDs@MIL-101 for ultrasensitive detection of CA242

At present, the development of electrochemiluminescence (ECL) immunosensor with excellent performance is still the research focus of immunoassay and detection. Herein, SnS₂ quantum dots (SnS₂ QDs) and metal-organic framework (MIL-101 (Cr)) are effectively combined to achieve synergistic signal amplification based on K₂S₂O₈ co-reactant, thereby constructing SnS₂ QDs/SO₄^•- and SO₄^•-/O₂ ECL double reaction luminous systems. SnS₂ QDs and singlet oxygen (¹(O₂)₂*) produced from the system as light-emitting devices jointly enhance the ECL response and significantly improve the sensitivity of the ECL immunosensor. Dissolved oxygen and SnS₂ QDs respectively generate HOO^• and SnS₂ QDs^•- under negative potential, and react with transient SO₄^•- to emit strong light respectively, so as to jointly enhance the ECL response. MIL-101 catalyzes the oxygen cathode reduction reaction to promote the conversion of dissolved oxygen into HOO^•, which greatly improves the ECL response of ¹(O₂)₂*. CuS with spherical nanoflower-like form as a co-reaction promoter of K₂S₂O₈ generate more SO₄^•- active substances, which further enhance the ECL response of the immunosensor. The constructed ECL immunosensor has the advantages of low detection limit, high sensitivity and better stability. Under the optimal conditions, the detection range is 0.1 mU/mL∼100 U/mL, and the detection limit is 0.015 mU/mL. The results show that the constructed ECL immunosensor can detect human CA242 samples and have a broad application prospect in biological analysis and early diagnosis of diseases.

Versatile Photoelectrochemical Biosensing for Hg2+ and Aflatoxin B1 Based on Enhanced Photocurrent of AgInS2 Quantum Dot-DNA Nanowires Sensitizing NPC-ZnO Nanopolyhedra

Eliminating false positives or negatives in analysis has been a challenge. Herein, a phenomenon of polarity-switching photocurrent of AgInS₂ quantum dot (QD)-DNA nanowires reversing nitrogen-doped porous carbon-ZnO (NPC-ZnO) nanopolyhedra was found for the first time, and a versatile photoelectrochemical (PEC) biosensor with a reversed signal was innovatively proposed for dual-target detection. NPC-ZnO is a photoactive material with excellent PEC properties, while AgInS₂ QDs as a photosensitive material match NPC-ZnO in the energy level, which not only promotes the transfer of photogenerated carriers but also switches the direction of PEC current. Furthermore, in order to prevent spontaneous agglomeration of AgInS₂ (AIS) QDs and improve its utilization rate, a new multiple-branched DNA nanowire was specially designed to assemble AgInS₂ QDs for constructing amplified signal probes, which not only greatly increased the load of AgInS₂ QDs but also further enhanced the photoelectric signal. When the target Hg²⁺-induced cyclic amplification process generated abundant RDNA, the DNA nanowire signal probe with plenty of QDs was linked to the NPC-ZnO/electrode by RDNA, generating greatly amplified polarity-reversed photocurrent for signal "ON" detection of Hg²⁺. After specific binding of the target (aflatoxin B1, AFB1) to its aptamer, the signal probes of AIS QD-DNA nanowires were released, realizing signal "OFF" assay of AFB1. Thus, the proposed new PEC biosensor provides a versatile method for detection of dual targets and also effectively avoids both false positive and negative phenomena in the assay process, which has great practical application potential in both environmental and food analysis.

Electrochemical DNA Biosensors Based on the Intrinsic Topological Insulator BiSbTeSe2 for Potential Application in HIV Determination

In this work, we reported a sensitive, label-free electrochemical biosensor based on the intrinsic topological insulator (TI) BiSbTeSe₂ for potential application in the determination of the HIV gene. With strong spin-obit coupling, TIs could have robust surface states with low electronic noise, which might be beneficial for the stable and sensitive electron transport between the electrode and electrolyte interface. Under optimized conditions of the biosensors using BiSbTeSe₂, the differential pulse voltammetry (DPV) peak currents showed a linear relationship with the logarithm of target DNA concentrations ranging from 1.0 × 10^-13 to 1.0 × 10^-7 M, with a detection limit of 1.07 × 10^-15 M. The sensing assay also displayed good selectivity and stability after storage at 4 °C for 7 days. This work provides an effective way to develop biosensors with topological materials, which have a potential application in the clinical determination and monitoring field.

Photoelectrochemical Detection of Exosomal miRNAs by Combining Target-Programmed Controllable Signal Quenching Engineering

MicroRNAs extracted from exosomes (exosomal miRNAs) have recently emerged as promising biomarkers for early prognosis and diagnosis. Thus, the development of an effective approach for exosomal miRNA monitoring has triggered extensive attention. Herein, a sensitive photoelectrochemical (PEC) biosensing platform is demonstrated for exosomal miRNA assay via the target miRNA-powered λ-exonuclease for the amplification strategy. The metal-organic framework (MOF)-decorated WO₃ nanoflakes heterostructure is constructed and implemented as the photoelectrode. Also, a target exosomal miRNA-activatable programmed release nanocarrier was fabricated, which is responsible for signal control. Hemin that acted as the electron acceptor was prior entrapped into the programmed control release nanocarriers. Once the target exosomal miRNAs-21 was introduced, the as-prepared programmed release nanocarriers were initiated to trigger the release of hemin, which enabled the quenching of the photocurrent. Under the optimized conditions, the level of exosomal miRNAs-21 could be accurately tracked ranging from 1 fM to 0.1 μM with a low detection limit of 0.5 fM. The discoveries illustrate the possibility for the rapid and efficient diagnosis and prognosis prediction of diseases based on the detection of exosomal miRNAs-21 and would provide feasible approaches for the fabrication of an efficient platform for clinical applications.