Non-thermal plasma technologies: New tools for bio-decontamination

Mechanisms underlying the potent antimicrobial effects of plasma-activated seawater (PASW) on fish spoilage bacterium Shewanella putrefaciens

Plasma-activated seawater (PASW) presents a promising approach for marine fish preservation, yet its antimicrobial efficacy and mechanisms remain unclear. This study found that PASW exhibits superior bactericidal properties against the fish spoilage bacterium Shewanella putrefaciens compared to plasma-activated water (PAW), and increased effectiveness in preserving fish fillets. To clarify the mechanisms, a detailed investigation was conducted, including the generation of reactive oxygen/nitrogen species (ROS/RNS) and active halogen species in PASW, and their antimicrobial efficacy. Findings showed greater nitrite and hydrogen peroxide production in PASW relative to PAW, as well as the conversion of chloride/bromide ions into active species, which collectively enhanced PASW's antimicrobial activity. The synergistic action of ROS/RNS and active chlorine/bromine species in PASW promoted the generation of intracellular ROS, causing increased membrane damage, redox imbalance, and consequently higher bacterial mortality. This study enhances our understanding of PASW's antimicrobial effects and highlights its potential applications in the seafood industry.

Potential use of cold plasma treatment for disinfection and quality preservation of grape inoculated with Botrytis cinerea

Gray mold caused by Botrytis cinerea is a serious disease of grape (Vitis vinifera) during storage. The aim of this study is to evaluate the effect of atmosphere cold plasma (a novel and nonthermal technology) on inactivation of B. cinerea and preservation of chemical, physical, and mechanical characteristics of grape inoculated with B. cinerea. Herein, different time of cold plasma (0, 10, 20, and 40 s) was firstly considered to be the main factors, besides different storage time (1, 2, 3, 4, and 5 weeks) at 4°C. According to the results, plasma treatment exhibited inhibitory effect on gray mold percentage and microbial load of B. cinerea (log CFU g-1) during postharvest storage. So, in the last week, the gray mold percentage and microbial load in the control were 100% and 3.6 log CFU g-1, and in 40-s plasma were 4.5% and 2.53 log CFU g-1, respectively. Although the minimum infection and microbial load were observed in 40-s plasma, better postharvest quality preservation was observed in short-time cold plasma treatment (≤20 s). Forty-second plasma caused fruit tissue destruction and negatively decreased mechanical indices (Emod: 0.0028, Fmax = 1.78, and W = 3.18) and weight loss (91.9) in comparison with ≤20-s plasma, in which mechanical indices (Emod =0.0077, Fmax = 3.6, and W = 10.06) and weight loss (1/1) were higher. The long-time cold plasma treatment (40 s) had also maximum effects on color changes (10) and surface temperature (2.8°C). Although the highest TSS and TA were observed in 40-s Plasma, but different time of plasma treatments had no effect on pH. Altogether, these results indicate that the short-time cold plasma treatment can inactivate B. cinerea on grape berries and preserve crop quality properties.

Overcoming antibiotic resistance: non-thermal plasma and antibiotics combination inhibits important pathogens

Antibiotic resistance (ATBR) is increasing every year as the overuse of antibiotics (ATBs) and the lack of newly emerging antimicrobial agents lead to an efficient pathogen escape from ATBs action. This trend is alarming and the World Health Organization warned in 2021 that ATBR could become the leading cause of death worldwide by 2050. The development of novel ATBs is not fast enough considering the situation, and alternative strategies are therefore urgently required. One such alternative may be the use of non-thermal plasma (NTP), a well-established antimicrobial agent actively used in a growing number of medical fields. Despite its efficiency, NTP alone is not always sufficient to completely eliminate pathogens. However, NTP combined with ATBs is more potent and evidence has been emerging over the last few years proving this is a robust and highly effective strategy to fight resistant pathogens. This minireview summarizes experimental research addressing the potential of the NTP-ATBs combination, particularly for inhibiting planktonic and biofilm growth and treating infections in mouse models caused by methicillin-resistant Staphylococcus aureus or Pseudomonas aeruginosa. The published studies highlight this combination as a promising solution to emerging ATBR, and further research is therefore highly desirable.

Ferroptosis induced by plasma-activated Ringer's lactate solution prevents oral cancer progression

OBJECTIVE

This study aimed to investigate the effect of plasma-activated Ringer's lactate solution (PAL) on oral squamous cell carcinoma (OSCC) cells and carcinogenic processes with a particular focus on iron and collagenous matrix formation.

MATERIALS AND METHODS

We used three OSCC cell lines, one keratinocyte cell line, and two fibroblast lines, and cell viability assays, immunoblotting, flow cytometry, and transmission electron microscopy were performed to evaluate the effect and type of cell death. The effect of PAL treatment on lysyl oxidase (LOX) expression was investigated in vitro and in vivo. Tamoxifen-inducible Mob1a/b double-knockout mice were used for the in vivo experiment.

RESULTS

PAL killed OSCC cells more effectively than the control nontumorous cells and suppressed cell migration and invasion. Ferroptosis occurred and the protein level of LOX was downregulated in cancer cells in vitro and in vivo. Additionally, PAL improved the survival rate of mice and suppressed collagenous matrix formation.

CONCLUSIONS

We demonstrated that PAL specifically kills OSCC cells and that ferroptosis occurs in vitro and in vivo. Furthermore, PAL can prevent carcinogenesis and improve the survival rate of oral cancer, especially tongue cancer, by changing collagenous matrix formation via LOX suppression.

Bipolar ionization rapidly inactivates real-world, airborne concentrations of infective respiratory viruses

The SARS-CoV-2 (COVID-19) pandemic has highlighted the urgent need for strategies that rapidly inactivate airborne respiratory viruses and break the transmission cycle of indoor spaces. Air ions can reduce viable bacteria, mold, and virus counts, however, most studies use small test enclosures with target microbes and ion sources in close vicinity. To evaluate ion performance in real-world spaces, experiments were conducted in a large, room-size BSL-3 Chamber. Negative and positive ions were delivered simultaneously using a commercially available bipolar air ion device. The device housed Needle Point Bipolar ionization (NPBI) technology. Large chamber studies often use unrealistically high virus concentrations to ensure measurable virus is present at the trial end. However, excessively high viral concentrations bias air cleaning devices towards underperformance. Hence, devices that provide a substantial impact for protecting occupants in real-world spaces with real-world virus concentrations are often dismissed as poor performers. Herein, both real-world and excessive virus concentrations were studied using Influenza A and B, Human Respiratory Syncytial Virus (RSV), and the SARS-CoV-2 Alpha and Delta strains. The average ion concentrations ranged from 4,100 to 24,000 per polarity over 60-minute and 30-minute time trials. The reduction rate was considerably greater for trials that used real-world virus concentrations, reducing infectivity for Influenza A and B, RSV, and SARS-CoV-2 Delta by 88.3-99.98% in 30 minutes, whereas trials using in-excess concentrations showed 49.5-61.2% in 30 minutes. These findings strongly support the addition of NPBI ion technology to building management strategies aimed to protect occupants from contracting and spreading infective respiratory viruses indoors.

Advances in the application of functional nanomaterial and cold plasma for the fresh-keeping active packaging of meat

The most recent advancements in food science and technology include cold sterilization of food and fresh-keeping packaging. Active packaging technology has received much interest due to the photocatalytic activity (PCA) of functional nanoparticles, including titanium dioxide (TiO2) and ferric oxide (Fe2O3). However, there are still significant concerns about the toxicity and safety of these functional nanoparticles. This review emphasizes the bacteriostatic and fresh-keeping properties of functional nanoparticles as well as their packaging strategies using the ultraviolet photo-catalysis effect. High-voltage electric field cold plasma (HVEF-CP) is the most innovative method of cold-sterilizing food. HVEF-CP sterilizes by producing photoelectrons, ions, and active free radicals on food media, which come into contact with the bacteria's surface and destroy their cells. Next, this review also assesses the photocatalytic activity and bacteriostasis kinetics of nanosized TiO2 and Fe2O3 in poultry, beef, and lamb. In addition, this review also emphasizes the importance of exploiting the complex interaction processes between TiO2 and Fe2O3, along with dietary components and their utilization in the fresh meat industry.

Cold atmospheric plasma: Its time-dependent effects on the elimination of bacterial colony on periodontal manual scalers

Background

This in vitro study investigated the time-dependent bactericidal effects of cold atmospheric argon plasma treatment of periodontal hand scalers as well as the scanning electron microscopic view of the scaler tip surfaces before and after plasma treatment.

Materials and Methods

The study used 34 periodontal hand scalers which were divided into test and control groups. The scaler tips were inoculated with Escherichia coli and Staphylococcus aureus bacteria, following which the scalers in the control and test groups were subjected to conventional sterilization and argon plasma sterilization, respectively. Varying exposure times of plasma treatment were done on the test group samples to evaluate the minimum time required for complete sterilization. Subsequently, streaks were made on plate count agar using each of these instruments. The agar plates were then kept in an incubator for 24 h, following which bacterial colony count was assessed (colony-forming units/mL). Furthermore, the scanning electron microscopic (SEM) view of the scaler tip was studied before and after plasma treatment.

Results

A complete elimination of bacterial load (Gram-positive as well as Gram-negative) from the instrument surface was achieved by the plasma exposure time of 15-20 s. SEM analysis did not show a significant difference before and after plasma treatment as not many organic residues were present on the scaler tip.

Conclusion

Cold atmospheric pressure plasma is an efficient and time-saving method of sterilization, capable of destroying both Gram-positive and Gram-negative bacteria.

Strategies for Bacterial Eradication from Human and Animal Semen Samples: Current Options and Future Alternatives

The primary role of semen processing and preservation is to maintain a high proportion of structurally and functionally competent and mature spermatozoa, that may be used for the purposes of artificial reproduction when needed, whilst minimizing any potential causes of sperm deterioration during ex vivo semen handling. Out of a multitude of variables determining the success of sperm preservation, bacterial contamination has been acknowledged with an increased interest because of its often unpredictable and complex effects on semen quality. Whilst antibiotics are usually the most straight-forward option to prevent the bacterial contamination of semen, antimicrobial resistance has become a serious threat requiring widespread attention. As such, besides discussing the consequences of bacteriospermia on the sperm vitality and the risks of antibiotic overuse in andrology, this paper summarizes the currently available evidence on alternative strategies to prevent bacterial contamination of semen prior to, during, and following sperm processing, selection, and preservation. Alternative antibacterial supplements are reviewed, and emphasis is given to modern methods of sperm selection that may be combined by the physical removal of bacteria prior to sperm preservation or by use in assisted reproductive technologies.

The Sensitivity of Fungi Colonising Buckwheat Grains to Cold Plasma Is Species Specific

Fungi are the leading cause of plant diseases worldwide and are responsible for enormous agricultural and industrial losses on a global scale. Cold plasma (CP) is a potential tool for eliminating or inactivating fungal contaminants from biological material such as seeds and grains. This study used a low-pressure radiofrequency CP system with oxygen as the feed gas to test the decontamination efficacy of different genera and species commonly colonising buckwheat grains. Two widely accepted methods for evaluating fungal decontamination after CP treatment of seeds were compared: direct cultivation technique or contamination rate method (%) and indirect cultivation or colony-forming units (CFU) method. For most of the tested fungal taxa, an efficient decrease in contamination levels with increasing CP treatment time was observed. Fusarium graminearum was the most susceptible to CP treatment, while Fusarium fujikuroi seems to be the most resistant. The observed doses of oxygen atoms needed for 1-log reduction range from 10²⁴-10²⁵ m^-2. Although there was some minor discrepancy between the results obtained from both tested methods (especially in the case of Fusarium spp.), the trends were similar. The results indicate that the main factors affecting decontamination efficiency are spore shape, size, and colouration.

Non-thermal plasma-treated melatonin inhibits the biological activity of HCC cells by increasing intracellular ROS levels and reducing RRM2 expression

Non-thermal plasma (NTP) is thought to have a cytotoxic effect on tumor cells. Although its application in cancer therapy has shown considerable promise, the current understanding of its mechanism of action and cellular responses remains incomplete. Furthermore, the use of melatonin (MEL) as an adjuvant anticancer drug remains unexplored. In this study, we found that NTP assists MEL in promoting apoptosis, delaying cell cycle progression, and inhibiting cell invasion and migration in hepatocellular carcinoma (HCC) cells. This mechanism may be associated with the regulation of intracellular reactive oxygen species levels and ribonucleotide reductase regulatory subunit M2 expression. Our findings confirm the pharmacological role of MEL and the adjuvant value of NTP, emphasizing their potential in combination therapy for HCC. Our study may have important implications for the development of new approaches for HCC treatment.

Metrology of Ar-N2/O2 Mixture Atmospheric Pressure Pulsed DC Jet Plasma and its Application in Bio-Decontamination

Atmospheric pressure plasma jets are gaining a lot of attention due to their widespread applications in the field of bio-decontamination, polymer modification, material processing, deposition of thin film, and nanoparticle fabrication. Herein, we are reporting the disinfection of Pseudomonas aeruginosa, Staphylococcus aureus, and Escherichia coli bacteria using plasma jet. In this regard, Ar-O₂, Ar-N₂, and Ar-O₂-N₂ mixture plasma is generated and characterized using optical and electrical characterization. Variation in plasma parameters like electron temperature, electron density, and reactive species production is monitored with discharge parameters such as applied voltage and feed gas concentration. Results show that the peak average power consumed in Ar-O₂, Ar-N₂, and Ar-O₂-N₂ mixture plasma is found to be 4.45, 2.93, and 4.35 W respectively, at 8 kV. Moreover, it is noted that by increasing applied voltage, the electron temperature, electron density, and reactive species production also increases. It is worth noting that electron temperature increases with increase in oxygen concentration in the mixture (, while it decreases with increase in nitrogen concentration in the mixture (Ar-N₂). Similarly, a decreasing trend in electron temperature is noted for Ar-O₂-N₂ mixture plasma. On the other hand, a decreasing trend in electron density is noted for all the mixtures. Reduction in viable colonies of Pseudomonas aeruginosa, Staphylococcus Aureus, and Escherichia coli were confirmed by the serial dilution method. The inactivation efficiency of pulsed DC plasma generated, in the Ar-N₂ mixture at 8 kV and 6 KHz, was evaluated against P. aeruginosa, S. aureus and E. coli bacteria by measuring the number of surviving cells versus plasma treatment time. Results showed that after 240 s of plasma treatment, the number of survival colonies of the mentioned bacteria was reduced to less than 30 CFU/mL.

Plasma-Treated Water: A Comparison with Analog Mixtures of Traceable Ingredients

Plasma-treated water (PTW) possess anti-microbial potential against Pseudomonas fluorescence, which is observable for both suspended cells and cells organized in biofilms. Against that background, the chemical composition of PTW tends to focus. Various analytical techniques have been applied for analyses, which reveal various traceable reactive oxygen and nitrogen compounds (RONS). Based on these findings, it is our aim to generate a PTW analog (anPTW), which has been compared in its anti-microbial efficiency with freshly generated PTW. Additionally, a solution of every traceable compound of PTW has been mixed according to their PTW concentration. As references, we treated suspended cells and mature biofilms of P. fluorescence with PTW that originates from a microwave-driven plasma source. The anti-microbial efficiency of all solutions has been tested based on a combination of a proliferation, an XTT, and a live–dead assay. The outcomes of the test proved an anti-microbial power of PTW that suggests more active ingredients than the traceable compounds HNO3, HNO2, and H2O2 or the combined mixture of the analog.

Combined effect of atmospheric gas plasma and UVA light: A sustainable and green alternative for chemical decontamination and microbial inactivation of fish processing water

The simultaneous use of UVA light irradiation coupled with low energy cold plasma generated by a dielectric barrier discharge prototype, results in significant enhancement of efficiency of the integrated process with respect to the sole plasma treatment. This effect has been demonstrated both on microbial inactivation of a food-borne pathogen, i.e. Listeria monocytogenes, and on the degradation of a compound of biological origin such as phenylalanine. In the latter case, the analysis of its reaction intermediates and the spectroscopic identification and quantification of peroxynitrites, allowed to propose mechanistic hypotheses on the nature of the observed synergistic effects. Moreover, it has been demonstrated that the process does not affect the quality of trout fillets, indicating its suitability as a chlorine-free, green, and sustainable tool for the decontamination of fish processing water.

Modelling of Nonthermal Dielectric Barrier Discharge Plasma at Atmospheric Pressure and Role of Produced Reactive Species in Surface Polymer Microbial Purification

A nonthermal atmospheric plasma reactor was used to sterilize polymer surfaces and satisfy safety constraints in a biological medium. A 1D fluid model was developed using COMSOL Multiphysics software^® 5.4 with a helium-oxygen mixture at low temperature for the decontamination of bacteria on polymer surfaces. An analysis of the evolution of the homogeneous dielectric barrier discharge (DBD) was carried out through studying the dynamic behavior of the discharge parameters including the discharge current, the consumed power, the gas gap voltage, and transport charges. In addition, the electrical characteristics of a homogeneous DBD under different operating conditions were studied. The results shown that increasing voltage or frequency caused higher ionization levels and maximum increase of metastable species' density and expanded the sterilization area. On the other hand, it was possible to operate plasma discharges at a low voltage and a high density of plasma using higher values of the secondary emission coefficient or permittivity of the dielectric barrier materials. When the discharge gas pressure increased, the current discharges declined, which indicated a lower sterilization efficiency under high pressure. A short gap width and the admixture of oxygen were needed for sufficient bio-decontamination. Plasma-based pollutant degradation devices could therefore benefit from these results.

Argon plasma-modified bacterial cellulose filters for protection against respiratory pathogens

In this work, we present novel, sustainable filters based on bacterial cellulose (BC) functionalized with low-pressure argon plasma (LPP-Ar). The "green" production process involved BC biosynthesis by Komagataeibacter xylinus, followed by simple purification, homogenization, lyophilization, and finally LPP-Ar treatment. The obtained LPP-Ar-functionalized BC-based material (LPP-Ar-BC-bM) showed excellent antimicrobial and antiviral properties against both Gram-positive (S. aureus) and Gram-negative (E. coli) bacteria, and an enveloped bacteriophage phage Φ6, with no cytotoxicity versus murine fibroblasts in vitro. Further, filters consisting of three layers of LPP-Ar-BC-bM had >99 % bacterial and viral filtration efficiency, while maintaining sufficiently low airflow resistance (6 mbar at an airflow of 95 L/min). Finally, as a proof-of-concept, we were able to prepare 80 masks with LPP-Ar-BC-bM filter and ~85 % of volunteer medical staff assessed them as "good" or "very good" in terms of comfort. We conclude that our novel sustainable, biobased, biodegradable filters are suitable for respiratory personal protective equipment (PPE), such as surgical masks and respirators.

EFFECTS OF COLD PLASMA ON CHLOROPHYLLS, CAROTENOIDS, ANTHOCYANINS, AND BETALAINS

Plasma is considered by several researchers to be the fourth state of matter. Cold plasma has been highlighted as an alternative to thermal treatments because heat induces less degradation of thermolabile bioactive compounds, such as natural pigments. In this review, we provide a compilation of the current information about the effects of cold plasma on natural pigments, such as the changes caused by plasma to the molecules of chlorophylls, carotenoids, anthocyanins, and betalains. As a result of the literature review, it is noted that can degrade cell membrane and promote damage to pigment storage sites; thereby releasing pigments and increasing their content in the extracellular space. However, the reactive species contained in the cold plasma can cause degradation of the pigments. Cold plasma is a promising technology for extracting pigments; however, case-by-case optimization of the extraction process is required.

Nitric-oxide enriched plasma-activated water inactivates 229E coronavirus and alters antiviral response genes in human lung host cells

The ongoing pandemic caused by the novel coronavirus, SARS-CoV-2, is influencing global health. Moreover, there is a major threat of future coronaviruses affecting the entire world in a similar, or even more dreadful, manner. Therefore, effective and biocompatible therapeutic options against coronaviruses are urgently needed. To address this challenge, medical specialists require a well-informed and safe approach to treating human coronaviruses (HCoVs). Herein, an environmental friendly approach for viral inactivation, based on plasma technology, was considered. A microwave plasma system was employed for the generation of the high amount of gaseous nitric oxide to prepare nitric oxide enriched plasma-activated water (NO-PAW), the effects of which on coronaviruses, have not been reported to date. To determine these effects, alpha-HCoV-229E was used in an experimental model. We found that NO-PAW treatment effectively inhibited coronavirus infection in host lung cells, visualized by evaluating the cytopathic effect and expression level of spike proteins. Interestingly, NO-PAW showed minimal toxicity towards lung host cells, suggesting its potential for therapeutic application. Moreover, this new approach resulted in viral inactivation and greatly improved the gene levels involved in host antiviral responses. Together, our findings provide evidence of an initiation point for further progress toward the clinical development of antiviral treatments, including such coronaviruses.

Plasma-Assisted Nanofabrication: The Potential and Challenges in Atomic Layer Deposition and Etching

The growing need for increasingly miniaturized devices has placed high importance and demands on nanofabrication technologies with high-quality, low temperatures, and low-cost techniques. In the past few years, the development and recent advances in atomic layer deposition (ALD) processes boosted interest in their use in advanced electronic and nano/microelectromechanical systems (NEMS/MEMS) device manufacturing. In this context, non-thermal plasma (NTP) technology has been highlighted because it allowed the ALD technique to expand its process window and the fabrication of several nanomaterials at reduced temperatures, allowing thermosensitive substrates to be covered with good formability and uniformity. In this review article, we comprehensively describe how the NTP changed the ALD universe and expanded it in device fabrication for different applications. We also present an overview of the efforts and developed strategies to gather the NTP and ALD technologies with the consecutive formation of plasma-assisted ALD (PA-ALD) technique, which has been successfully applied in nanofabrication and surface modification. The advantages and limitations currently faced by this technique are presented and discussed. We conclude this review by showing the atomic layer etching (ALE) technique, another development of NTP and ALD junction that has gained more and more attention by allowing significant advancements in plasma-assisted nanofabrication.

Technologies to decontaminate bacterial biofilm on hospital surfaces: a potential new role for cold plasma?

Healthcare-associated infections (HCAIs) are a major challenge and the near patient surface is important in harbouring causes such as methicillin-resistant Staphylococcus aureus (MRSA) and Clostridioides difficile. Current approaches to decontamination are sub-optimal and many studies have demonstrated that microbial causes of HCAIs may persist with onward transmission. This may be due to the capacity of these microbes to survive in biofilms on surfaces. New technologies to enhance hospital decontamination may have a role in addressing this challenge. We have reviewed current technologies such as UV light and hydrogen peroxide and also assessed the potential use of cold atmospheric pressure plasma (CAPP) in surface decontamination. The antimicrobial mechanisms of CAPP are not fully understood but the production of reactive oxygen and other species is believed to be important. CAPP systems have been shown to partially or completely remove a variety of biofilms including those caused by Candida albicans, and multi-drug-resistant bacteria such as MRSA. There are some studies that suggest promise for CAPP in the challenge of surface decontamination in the healthcare setting. However, further work is required to define better the mechanism of action. We need to know what surfaces are most amenable to treatment, how microbial components and the maturity of biofilms may affect successful treatment, and how would CAPP be used in the clinical setting.

Non-thermal plasma causes Pseudomonas aeruginosa biofilm release to planktonic form and inhibits production of Las-B elastase, protease and pyocyanin

The increasing risk of antibiotic failure in the treatment of Pseudomonas aeruginosa infections is largely related to the production of a wide range of virulence factors. The use of non-thermal plasma (NTP) is a promising alternative to antimicrobial treatment. Nevertheless, there is still a lack of knowledge about the effects of NTP on the virulence factors production. We evaluated the ability of four NTP-affected P. aeruginosa strains to re-form biofilm and produce Las-B elastase, proteases, lipases, haemolysins, gelatinase or pyocyanin. Highly strains-dependent inhibitory activity of NTP against extracellular virulence factors production was observed. Las-B elastase activity was reduced up to 82% after 15-min NTP treatment, protease activity and pyocyanin production by biofilm cells was completely inhibited after 60 min, in contrast to lipases and gelatinase production, which remained unchanged. However, for all strains tested, a notable reduction in biofilm re-development ability was depicted using spinning disc confocal microscopy. In addition, NTP exposure of mature biofilms caused disruption of biofilm cells and their dispersion into the environment, as shown by transmission electron microscopy. This appears to be a key step that could help overcome the high resistance of P. aeruginosa and its eventual elimination, for example in combination with antibiotics still highly effective against planktonic cells.

Study on Active Particles in Air Plasma and Their Effect on α-Amylase

As a new technology for food processing, plasma has good prospects for protein modification. This study investigated the effect of plasma on the activity of the α-amylase. The composition of the active particles in air plasma generated by spark discharge was analyzed and determined. Furthermore, the quantitative analysis of the active particles such as H₂O₂, O₃, and -OH was made by the chemical detection method. Powdered α-amylase was treated with plasma in various conditions, in which α-amylase and the variation of α-amylase activity under the action of air plasma were quantitatively analyzed. The results showed that the concentration of active particles in the system was positively correlated with the action time for air plasma. After 5 min of plasma action, the concentration of O₃ and H₂O₂ was large enough for food disinfection, but the concentration of -OH was smaller and its lifetime was extremely short. Moreover, it was determined that the optimum action time for the activation of solid powdered α-amylase by air plasma was 120 s. With higher energy, the air plasma acts directly on solid powdered α-amylase to destroy its spatial structure, resulting in enzyme inactivation, sterilization, and disinfection.

Plasma treatment effects on destruction and recovery of Porphyromonas gingivalis biofilms

The objective of this study was to investigate the treatment effects of non-thermal atmospheric gas plasmas (NTAP) on destruction and the recovery (or re-colonization) of Porphyromonas gingivalis (P. gingivalis) in biofilms. P. gingivalis is a well-known keystone periodontal pathogen strongly associated with periodontal diseases, especially periodontitis. P. gingivalis biofilms were formed on stainless steel coupons and treated for 1, 2, and 5 minutes by NTAP of pure argon gas and argon+oxygen gas mixture. MTT assay, colony forming unit (CFU) counting assay and confocal laser scanning microscopy (CLSM) were used to assess the destruction efficiency. In addition, the plasma treated biofilms were re-cultured in the medium supplemented with antibiotics and oxidative stress sources to determine the synergy of the NTAP with other antimicrobial agents. The results showed the plasma treatment could result in 2.7 log unit reduction in bacterial load. The recovered biofilm CFU with NTAP treatment combined with sub minimal inhibition concentration of amoxicillin was 0.33 log units less than the biofilm treated with amoxicillin alone. The recovered biofilm CFU in NTAP groups was about 2.0 log units less than that in the untreated controls under H₂O₂ treatment. There was approximately 1.0 log unit reduction of biofilm CFU in plasma treated biofilm compared with untreated control under paraquat treatment. The plasma treated biofilms exhibited less resistance to amoxicillin and greater susceptibility to hydrogen peroxide (H₂O₂) and paraquat, suggesting that NTAP may enhance biofilm susceptibility to host defense. These in vitro findings suggested that NTAP could be a novel and effective treatment method of oral biofilms that cause periodontal diseases.

A Plasma-Based Decontamination Process Reveals Potential for an in-Process Surface-Sanitation Method

Methods, which use an indirect plasma treatment for the inactivation of microorganisms in foods, claim a vastly growing field of research. This paper presents a method that uses plasma-processed air (PPA) as a sanitizer. In addition to a sanitation concept for the decontamination of produce in the value chain, the presented method offers a possible application as an “in-process” surface sanitation. PPA provides antimicrobial-potent species, which are predominantly reactive nitrogen species (RNS); this has an outstanding groove penetration property. In an experimental approach, surfaces, made from materials, which are frequently used for the construction of food-processing plants, were inoculated with different microorganisms. Listeria monocytogenes (ATCC 15313), Staphylococcus aureus (ATCC 6538), Escherichia coli (ATCC 10538), Salmonella enterica subsp. enterica serovar Typhimurium (ATCC 43971), and Salmonella enterica subsp. enterica serovar Enteritidis (ATCC 13076) are all microorganisms that frequently appear in foods and possess the risk for cross-contamination from the plant to the produce or vice versa. The contaminated samples were treated for various treatment times (1–5 min) with PPA of different antimicrobial potencies. Subsequently, the microbial load on the specimens was determined and compared with the load of untreated samples. As a result, reduction factors (RF) up to several log10-steps were obtained. Although surface and the bacterial strain showed an influence on the RF, the major influence was seen by a prolongation of the treatment time and an increase in the potency of the PPA.

Advances in the superhydrophilicity-modified titanium surfaces with antibacterial and pro-osteogenesis properties: A review

In recent years, the rate of implant failure has been increasing. Microbial infection was the primary cause, and the main stages included bacterial adhesion, biofilm formation, and severe inhibition of implant osseointegration. Various biomaterials and their preparation methods have emerged to produce specific implants with antimicrobial or bactericidal properties to reduce implant infection caused by bacterial adhesion and effectively promote bone and implant integration. In this study, we reviewed the research progress of bone integration promotion and antibacterial action of superhydrophilic surfaces based on titanium alloys. First, the adverse reactions caused by bacterial adhesion to the implant surface, including infection and bone integration deficiency, are briefly introduced. Several commonly used antibacterial methods of titanium alloys are introduced. Secondly, we discuss the antibacterial properties of superhydrophilic surfaces based on ultraviolet photo-functionalization and plasma treatment, in contrast to the antibacterial principle of superhydrophobic surface morphology. Thirdly, the osteogenic effects of superhydrophilic surfaces are described, according to the processes of osseointegration: osteogenic immunity, angiogenesis, and osteogenic related cells. Finally, we discuss the challenges and prospects for the development of this superhydrophilic surface in clinical applications, as well as the prominent strategies and directions for future research.

Cold atmospheric plasma for addressing the COVID-19 pandemic

The coronavirus disease 2019 (COVID-19) pandemic has greatly stressed the global community, exposing vulnerabilities in the supply chains for disinfection materials, personal protective equipment, and medical resources worldwide. Disinfection methods based on cold atmospheric plasma (CAP) technologies offer an intriguing solution to many of these challenges because they are easily deployable and do not require resource-constrained consumables or reagents needed for conventional decontamination practices. CAP technologies have shown great promise for a wide range of medical applications from wound healing and cancer treatment to sterilization methods to mitigate airborne and fomite transfer of viruses. This review engages the broader community of scientists and engineers that wish to help the medical community with the ongoing COVID-19 pandemic by establishing methods to utilize broadly applicable CAP technologies.

Temporary immersion systems (TISs): A comprehensive review

The temporary immersion systems (TISs) have been widely used in plant biotechnology. TISs have different advantages from the point of micropropagation and production of secondary metabolites over other continuous liquid-phase bioreactors. The current work presents the structure, operation mode, configuration type, and micropropagation or secondary metabolite production in TISs. This review deals with the advantages and disadvantages of TISs and the factors affecting their performance. Future research could focus on new designs based on CFD simulation, facilitating sterilization, and combining TISs with other bioreactors (e.g., mist bioreactors) to make a hybrid bioreactor.

A comprehensive study on decontamination of food-borne microorganisms by cold plasma

Food-borne microorganisms are one of the biggest concern in food industry. Food-borne microorganisms such as Listeria monocytogenes, Escherichia coli, Salmonella spp., Vibrio spp., Campylobacter jejuni, Hepatitis A are commonly found in food products and can cause severe ailments in human beings. Hence, disinfection of food is performed before packaging is performed to sterilize food. Traditional methods for disinfection of microorganisms are based on chemical, thermal, radiological and physical principles. They are highly successful, but they are complex and require more time and energy to accomplish the procedure. Cold plasma is a new technique in the field of food processing. CP treatments has no or very low effect on physical, chemical and nutritional properties of food products. This paper reviews the effect of plasma processing on food products such as change in colour, texture, pH level, protein, carbohydrate, and vitamins. Cold plasma by being a versatile, effective, economical and environmentally friendly method provides unique advantages over commercial food processing technologies for disinfection of food.

Calibration Approach for Gaseous Oxidized Mercury Based on Nonthermal Plasma Oxidation of Elemental Mercury

Atmospheric mercury measurements carried out in the recent decades have been a subject of bias largely due to insufficient consideration of metrological traceability and associated measurement uncertainty, which are ultimately needed for the demonstration of comparability of the measurement results. This is particularly challenging for gaseous Hg^II species, which are reactive and their ambient concentrations are very low, causing difficulties in proper sampling and calibration. Calibration for atmospheric Hg^II exists, but barriers to reliable calibration are most evident at ambient Hg^II concentration levels. We present a calibration of Hg^II species based on nonthermal plasma oxidation of Hg⁰ to Hg^II. Hg⁰ was produced by quantitative reduction of Hg^II in aqueous solution by SnCl₂ and aeration. The generated Hg⁰ in a stream of He and traces of reaction gas (O₂, Cl₂, or Br₂) was then oxidized to different Hg^II species by nonthermal plasma. A highly sensitive ¹⁹⁷Hg radiotracer was used to evaluate the oxidation efficiency. Nonthermal plasma oxidation efficiencies with corresponding expanded standard uncertainty values were 100.5 ± 4.7% (k = 2) for 100 pg of HgO, 96.8 ± 7.3% (k = 2) for 250 pg of HgCl₂, and 77.3 ± 9.4% (k = 2) for 250 pg of HgBr₂. The presence of HgO, HgCl₂, and HgBr₂ was confirmed by temperature-programmed desorption quadrupole mass spectrometry (TPD-QMS). This work demonstrates the potential for nonthermal plasma oxidation to generate reliable and repeatable amounts of Hg^II compounds for routine calibration of ambient air measurement instrumentation.

Mitochondrial E3 ubiquitin ligase 1 (MUL1) as a novel therapeutic target for diseases associated with mitochondrial dysfunction

Mitochondrial E3 ubiquitin ligase 1 (MUL1) is a mitochondrial outer membrane-anchored protein-containing transmembrane domain in its N- and C-terminal regions, where both are exposed to the cytosol. Interestingly the C-terminal region has a RING finger domain responsible for its E3 ligase activity, as ubiquitin or in SUMOylation, interacting with proteins related to mitochondrial fusion and fission, cell survival, and tumor suppressor process, such as Akt. Therefore, MUL1 is involved in various cellular processes, such as mitochondrial dynamics, inter-organelle communication, proliferation, mitophagy, immune response, inflammation and cell apoptosis. MUL1 is expressed at a higher basal level in the heart, immune system organs, and blood. Here, we discuss the role of MUL1 in mitochondrial dynamics and its function in various pathological models, both in vitro and in vivo. In this context, we describe the role of MUL1 in: (1) the inflammatory response, by regulating NF-κB activity; (2) cancer, by promoting cell death and regulating exonuclear function of proteins, such as p53; (3) neurological diseases, by maintaining communication with other organelles and interacting with proteins to eliminate damaged organelles and; (4) cardiovascular diseases, by maintaining mitochondrial fusion/fission homeostasis. In this review, we summarize the latest advances in the physiological and pathological functions of MUL1. We also describe the different substrates of MUL1, acting as a positive or negative regulator in various pathologies associated with mitochondrial dysfunction. In conclusion, MUL1 could be a potential key target for the development of therapies that focus on ensuring the functionality of the mitochondrial network and, furthermore, the quality control of intracellular components by synchronously modulating the activity of different cellular mechanisms involved in the aforementioned pathologies. This, in turn, will guide the development of targeted therapies.

Design of nutrient gas-phase bioreactors: a critical comprehensive review

To reach an efficient and economical gas-phase bioreactor is still one of the most critical challenges in biotechnology engineering. The numerous advantages of gas-phase bioreactors (GPBs) as well as disadvantages of these bioreactors should be exactly recognized, and efforts should be made to eliminate these defects. The first step in upgrading these bioreactors is to identify their types and the results of previous research. In the present work, a summary of the studies carried out in the field of cultivation in these bioreactors, their classification, their components, their principles and relations governing elements, modeling them, and some of their inherent engineering aspects are presented. Literature review showed that inoculation of shoots, roots, adventurous roots, callus, nodal explants, anther, nodal segment, somatic embryo, hairy roots, and fungus is reported in 15, 2, 2, 2, 3, 2, 1, 1, 37, and 5 cases, respectively.

Applications of Plasma Produced with Electrical Discharges in Gases for Agriculture and Biomedicine

The use of thermal and non-thermal atmospheric pressure plasma to solve problems related to agriculture and biomedicine is the focus of this paper. Plasma in thermal equilibrium is used where heat is required. In agriculture, it is used to treat soil and land contaminated by the products of biomass, plastics, post-hospital and pharmaceutical waste combustion, and also by ecological phenomena that have recently been observed, such as droughts, floods and storms, leading to environmental pollution. In biomedical applications, thermal plasma is used in so-called indirect living tissue treatment. The sources of thermal plasma are arcs, plasma torches and microwave plasma reactors. In turn, atmospheric pressure cold (non-thermal) plasma is applied in agriculture and biomedicine where heat adversely affects technological processes. The thermodynamic imbalance of cold plasma makes it suitable for organic syntheses due its low power requirements and the possibility of conducting chemical reactions in gas at relatively low and close to ambient temperatures. It is also suitable in the treatment of living tissues and sterilisation of medical instruments made of materials that are non-resistant to high temperatures. Non-thermal and non-equilibrium discharges at atmospheric pressure that include dielectric barrier discharges (DBDs) and atmospheric pressure plasma jets (APPJs), as well as gliding arc (GAD), can be the source of cold plasma. This paper presents an overview of agriculture and soil protection problems and biomedical and health protection problems that can be solved with the aid of plasma produced with electrical discharges. In particular, agricultural processes related to water, sewage purification with ozone and with advanced oxidation processes, as well as those related to contaminated soil treatment and pest control, are presented. Among the biomedical applications of cold plasma, its antibacterial activity, wound healing, cancer treatment and dental problems are briefly discussed.

Cold atmospheric pressure plasma for attenuation of SARS-CoV-2 spike protein binding to ACE2 protein and the RNA deactivation

Cold atmospheric pressure (CAP) plasma has a profound effect on protein–protein interactions. In this work, we have highlighted the deactivation of the Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) spike protein by CAP plasma treatment. Complete deactivation of spike protein binding to the human ACE2 protein was observed within an exposure time of 5 minutes which is correlated to the higher concentration of hydrogen peroxide formation due to the interaction with the reactive oxygen species present in the plasma. On the other hand, we have established that CAP plasma is also capable of degrading RNA of SARS-CoV-2 virus which is also linked to hydrogen peroxide concentration. The reactive oxygen species is produced in the plasma by using noble gases such as helium, in the absence of any other chemicals. Therefore, it is a green process with no chemical waste generated and highly advantageous from the environmental safety prospects. Results of this work could be useful in designing plasma-based disinfection systems over those based on environmentally hazardous chemical-based disinfection and biomedical applications.

Cold atmospheric pressure (CAP) plasma for the deactivation of the Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) spike protein binding to ACE2 protein.

Airborne pathogenic microorganisms and air cleaning technology development: A review

Transmission of pathogens through air is a critical pathway for the spread of airborne diseases, as airborne pathogenic microorganisms cause several harmful infections. This review summarizes the occurrence, transmission, and adverse impacts of airborne pathogenic microorganisms that spread over large distances via bioaerosols. Air cleaning technologies have demonstrated great potential to prevent and reduce the spread of airborne diseases. The recent advances in air cleaning technologies are summarized on the basis of their advantages, disadvantages, and adverse health effects with regard to the inactivation mechanisms. The application scope and energy consumption of different technologies are compared, and the characteristics of air cleaners in the market are discussed. The development of high-efficiency, low-cost, dynamic air cleaning technology is identified as the leading research direction of air cleaning. Furthermore, future research perspectives are discussed and further development of current air cleaning technologies is proposed.

Cold plasma technologies: Their effect on starch properties and industrial scale-up for starchmodification

Native starches have limited applications in the food industry due to their unreactive and insoluble nature. Cold plasma technology, including plasma-activated water (PAW), has been explored to modify starches to enhance their functional, thermal, molecular, morphological, and physicochemical properties. Atmospheric cold plasma and low-pressure plasma systems have been used to alter starches and have proven successful. This review provides an in-depth analysis of the different cold plasma setups employed for starch modifications. The effect of cold plasma technology application on starch characteristics is summarized. We also discussed the potential of plasma-activated water as a novel alternative for starch modification. This review provides information needed for the industrial scale-up of cold plasma technologies as an eco-friendly method of starch modification.

•

Cold plasma technology could be an effective, sustainable alternative for starch modification.

•

The extent of modification of starches from different botanical sources depends on the type of cold plasma technology used.

•

For mainstream adoption of cold plasma modified starches, research on safety and consumer perception must be conducted.

Aurora Borealis in dentistry: The applications of cold plasma in biomedicine

Plasma is regularly alluded to as the fourth form of matter. Its bounty presence in nature along with its potential antibacterial properties has made it a widely utilized disinfectant in clinical sciences. Thermal plasma and non-thermal (or cold atmospheric) plasma (NTP) are two types of plasma. Atoms and heavy particles are both available at the same temperature in thermal plasma. Cold atmospheric plasma (CAP) is intended to be non-thermal since its electrons are hotter than the heavier particles at ambient temperature. Direct barrier discharge (DBD), atmospheric plasma pressure jet (APPJ), etc. methods can be used to produce plasma, however, all follow a basic concept in their generation. This review focuses on the anticipated uses of cold atmospheric plasma in dentistry, such as its effectiveness in sterilizing dental instruments by eradicating bacteria, its advantage in dental cavity decontamination over conventional methods, root canal disinfection, its effects on tooth whitening, the benefits of plasma treatment on the success of dental implant placement, and so forth. Moreover, the limitations and probable solutions has also been anticipated. These conceivable outcomes thus have proclaimed the improvement of more up-to-date gadgets, for example, the plasma needle and plasma pen, which are efficient in treating the small areas like root canal bleaching, biofilm disruption, requiring treatment in dentistry.

•

Non-thermal plasma (NTP) has regarded as an important tool for biomedical application especially dental application.

•

The surface application of NTP can be used for disinfecting microbial infection in endodontic issues.

•

NTP can be used to eradicate the microorganism biofilm responsible for dental caries.

•

NTP can also be utilized in would healing, implant modifications and adhesive restoration.

•

NTP is potential candidate for clinical application in dentistry based on the experimental proofs.

A review of methods to reduce the probability of the airborne spread of COVID-19 in ventilation systems and enclosed spaces

COVID-19 forced the human population to rethink its way of living. The threat posed by the potential spread of the virus via an airborne transmission mode through ventilation systems in buildings and enclosed spaces has been recognized as a major concern. To mitigate this threat, researchers have explored different technologies and methods that can remove or decrease the concentration of the virus in ventilation systems and enclosed spaces. Although many technologies and methods have already been researched, some are currently available on the market, but their effectiveness and safety concerns have not been fully investigated. To acquire a broader view and collective perspective of the current research and development status, this paper discusses a comprehensive review of various workable technologies and methods to combat airborne viruses, e.g., COVID-19, in ventilation systems and enclosed spaces. These technologies and methods include an increase in ventilation, high-efficiency air filtration, ionization of the air, environmental condition control, ultraviolet germicidal irradiation, non-thermal plasma and reactive oxygen species, filter coatings, chemical disinfectants, and heat inactivation. Research gaps have been identified and discussed, and recommendations for applying such technologies and methods have also been provided in this article.