Stimulating sediment bioremediation with benthic microbial fuel cells

Exogenous paths regulate electron transfer enhancing sediment phosphorus immobilization

The lack of electron acceptors in anaerobic sediments leads to endogenous phosphorus release and low removal efficiency of organic pollutants. This study introduced electrodes and iron oxides into sediments to construct electron network transport chains to supplement electron acceptors. The sediment total organic carbon (TOC) removal efficiencies of closed-circuit (CC) and closed-circuit with Fe addition (CC-Fe) were estimated to be 1.4 and 1.7 times of the control. Unlike the fluctuation of phosphorus in the overlying water of the controls, the CC-Fe was stabled at 0.04-0.08 mg/L during the 84-d operation. The phosphorus in interstitial water of CC-Fe was 30 % less than in control, whereas in sediment, the redox sensitive phosphorus was increased by 14 %, indicating phosphorus was preferred to fix into sediments rather than interstitial water. This is important to reduce the risk of endogenous phosphorus returning to the overlying water. Microbial community analysis showed that the multiplication of Fonticella in CC-Fe (20 %) was 1.8-fold of control (11 %) which improved the TOC removal efficiency. While electroactive microorganisms accumulated near the electrode reduced the abundance of Fe-reducing bacteria, such as Desulfitobacterium (2.4 %), leading to better phosphorus fixation. These findings suggest a strategy for the efficient bioremediation of endogenous pollution in water, with broader implications for regulating electron transport paths and element cycles in aquatic environments.

Organic carbon compounds removal and phosphate immobilization for internal pollution control: Sediment microbial fuel cells, a prospect technology

As a current technology that can effectively remove organic carbon compounds and immobilize phosphorus in sediment, sediment microbial fuel cells (SMFCs) can combine sediment remediation with power generation. This review discusses the removal efficiency of SMFCs on organic carbon compounds, including sediment organic matter, antibiotics, oil-contaminated sediments, methane, persistent organic pollutants, and other organic pollutants in sediment, with more comprehensive and targeted summaries, and it also emphasizes the mitigation of phosphorus pollution in water from the perspective of controlling endogenous phosphorus. In this review, the microbial community is used as a starting point to explore more about its roles on phosphorus and organic carbon compounds under SMFCs. Electrode modification, addition of exogenous substances and combinations with other technologies to improve the performance of SMFCs are also reviewed. It is further demonstrated that SMFCs have the prospect of long-term sustainability, but more attention needs to be paid to the study of the mechanism of SMFCs and the continuous improvement of devices for further application in practice.

Microbiome regulation for sustainable wastewater treatment

Sustainable wastewater treatment is essential for attaining clean water and sanitation, aligning with UN Sustainable Development Goals. Wastewater treatment plants (WWTPs) have utilized environmental microbiomes in biological treatment processes in this effort for over a century. However, the inherent complexity and redundancy of microbial communities, and emerging chemical and biological contaminants, challenge the biotechnology applications. Over the past decades, understanding and utilization of microbial energy metabolism and interaction relationships have revolutionized the biological system. In this review, we discuss how microbiome regulation strategies are being used to generate actionable performance for low-carbon pollutant removal and resource recovery in WWTPs. The engineering application cases also highlight the real feasibility and promising prospects of the microbiome regulation approaches. In conclusion, we recommend identifying environmental risks associated with chemical and biological contaminants transformation as a prerequisite. We propose the integration of gene editing and enzyme design to precisely regulate microbiomes for the synergistic control of both chemical and biological risks. Additionally, the development of integrated technologies and engineering equipment is crucial in addressing the ongoing water crisis. This review advocates for the innovation of conventional wastewater treatment biotechnology to ensure sustainable wastewater treatment.

Microbial mediated remediation of heavy metals toxicity: mechanisms and future prospects

Heavy metal pollution has become a serious concern across the globe due to their persistent nature, higher toxicity, and recalcitrance. These toxic metals threaten the stability of the environment and the health of all living beings. Heavy metals also enter the human food chain by eating contaminated foods and cause toxic effects on human health. Thus, remediation of HMs polluted soils is mandatory and it needs to be addressed at higher priority. The use of microbes is considered as a promising approach to combat the adverse impacts of HMs. Microbes aided in the restoration of deteriorated environments to their natural condition, with long-term environmental effects. Microbial remediation prevents the leaching and mobilization of HMs and they also make the extraction of HMs simple. Therefore, in this context recent technological advancement allowed to use of bioremediation as an imperative approach to remediate polluted soils. Microbes use different mechanisms including bio-sorption, bioaccumulation, bioleaching, bio-transformation, bio-volatilization and bio-mineralization to mitigate toxic the effects of HMs. Thus, keeping in the view toxic HMs here in this review explores the role of bacteria, fungi and algae in bioremediation of polluted soils. This review also discusses the various approaches that can be used to improve the efficiency of microbes to remediate HMs polluted soils. It also highlights different research gaps that must be solved in future study programs to improve bioremediation efficency.

Microalgae-bacteria nexus for environmental remediation and renewable energy resources: Advances, mechanisms and biotechnological applications

Microalgae and bacteria, known for their resilience, rapid growth, and proximate ecological partnerships, play fundamental roles in environmental and biotechnological advancements. This comprehensive review explores the synergistic interactions between microalgae and bacteria as an innovative approach to address some of the most pressing environmental issues and the demands of clean and renewable freshwater and energy sources. Studies indicated that microalgae-bacteria consortia can considerably enhance the output of biotechnological applications; for instance, various reports showed during wastewater treatment the COD removal efficiency increased by 40%-90.5 % due to microalgae-bacteria consortia, suggesting its great potential amenability in biotechnology. This review critically synthesizes research works on the microalgae and bacteria nexus applied in the advancements of renewable energy generation, with a special focus on biohydrogen, reclamation of wastewater and desalination processes. The mechanisms of underlying interactions, the environmental factors influencing consortia performance, and the challenges and benefits of employing these bio-complexes over traditional methods are also discussed in detail. This paper also evaluates the biotechnological applications of these microorganism consortia for the augmentation of biomass production and the synthesis of valuable biochemicals. Furthermore, the review sheds light on the integration of microalgae-bacteria systems in microbial fuel cells for concurrent energy production, waste treatment, and resource recovery. This review postulates microalgae-bacteria consortia as a sustainable and efficient solution for clean water and energy, providing insights into future research directions and the potential for industrial-scale applications.

SHOX Variations in Idiopathic Short Stature in North India and a Review of Cases from Asian Countries

Objective

Short stature homeobox (SHOX) haploinsufficiency underlies idiopathic short stature (ISS) and Leri-Weill dyschondrosteosis. The worldwide prevalence of SHOX variations in ISS varies from 2.5% to 15.0%. The aim of this study was to assess the implication of SHOX variation in ISS in North Indians and compare this with other cases of SHOX variations from Asian population.

Methods

SHOX gene analysis was carried out by multiplex ligation-dependent probe amplification followed by Sanger sequencing in 54 patients with variable phenotypes. Comparison with other reports in a meta-analysis comprising the current study and 11 previous studies (n=979) was performed.

Results

SHOX analysis resulted in 12.9% positivity (7.4% deletions and 5.5% duplications). SHOX association was seen significantly related to gender, with predominance in females (p=0.047). Short arms and forearms were the only significantly associated trait seen in 51.9% of children. The overall prevalence of SHOX variation was 15.2% in Asians with ISS. No significant difference was found in geographical region-specific analysis.

Conclusion

This study summarises findings from the last decade and provides an updated picture of the prevalence of SHOX variations in Asians, emphasizing their potential as therapeutic targets in ISS patients. Further high quality, large investigations including functional validation is warranted to validate this association.

The application of ferrous and graphitic N modified graphene-based composite cathode material in the bio-electro-Fenton system driven by sediment microbial fuel cells to degrade methyl orange

In this work, the ferrous (Fe2+) and graphitic N modified graphene-based composite cathode materials (N-rGO/Fe3O4) were developed through an in-situ reduction method, aiming to facilitate the two-electron pathway in the oxidation-reduction process. This approach generated a specific concentration of H2O2, enabling the construction of a sediment bio-electro-Fenton system using Fe2+ released from the cathode materials. Notably, this system operates without the need for proton exchange membranes. During the cathode material preparation, the utilization of Fe2+ as a reduction agent for graphene oxide (GO), triggered ammonia water to form graphitic N in graphene sheets. This addition enhanced the two-electron pathway, resulting in increased H2O2 production. Specifically, when the Fe2+ concentration was maintained at 0.1 mol/L, precise preparation of N-rGO/Fe3O4 occurred, leading to a maximum output voltage of 0.528 V and a maximum power density of 178.17 mW/m2. The degradation of methyl orange (MO) reached 68.91% within a 25-h period, a phenomenon contributed to the presence of graphitic N in the graphene sheets. H2O2, a byproduct of the two-electron pathway in cathode oxidation reduction reaction, played a crucial role in constructing the bio-electro-Fenton system. This system, in conjunction with Fe2+ released from N-rGO/Fe3O4, facilitated the complete degradation process of MO.

Energy harvesting from plants using hybrid microbial fuel cells; potential applications and future exploitation

Microbial Fuel Cells (MFC) can be fuelled using biomass derived from dead plant material and can operate on plant produced chemicals such as sugars, carbohydrates, polysaccharides and cellulose, as well as being "fed" on a regular diet of primary biomass from plants or algae. An even closer relationship can exist if algae (e.g., prokaryotic microalgae or eukaryotic and unicellular algae) can colonise the open to air cathode chambers of MFCs driving photosynthesis, producing a high redox gradient due to the oxygenic phase of collective algal cells. The hybrid system is symbiotic; the conditions within the cathodic chamber favour the growth of microalgae whilst the increased redox and production of oxygen by the algae, favour a more powerful cathode giving a higher maximum voltage and power to the photo-microbial fuel cell, which can ultimately be harvested for a range of end-user applications. MFCs can utilise a wide range of plant derived materials including detritus, plant composts, rhizodeposits, root exudates, dead or dying macro- or microalgae, via Soil-based Microbial Fuel Cells, Sediment Microbial Fuel Cells, Plant-based microbial fuel cells, floating artificial islands and constructed artificial wetlands. This review provides a perspective on this aspect of the technology as yet another attribute of the benevolent Bioelectrochemical Systems.

Improved electrochemical properties of graphite electrodes incubated with iron powders in rice-paddy fields boost power outputs from microbial fuel cells

Studies have shown that the supplementation of anode-surrounding soil with zero-valent iron (ZVI) boosts power outputs from rice paddy-field microbial fuel cells (RP-MFCs). In order to understand mechanisms by which ZVI boosts outputs from RP-MFCs, the present study operated RP-MFCs with and without ZVI, and compositions of anode-associated bacteria and electrochemical properties of graphite anodes were analyzed after 3-month operation. Metabarcoding using 16S rRNA gene fragments showed that bacterial compositions did not largely differ among these RP-MFCs. Cyclic voltammetry showed improved electrochemical properties of anodes recovered from ZVI-supplemented RP-MFCs, and this was attributed to the adhesion of iron-oxide films onto graphite surfaces. Bioelectrochemical devices equipped with graphite anodes recovered from ZVI-supplemented RP-MFCs generated higher currents than those with fresh graphite anodes. These results suggest that ZVI is oxidized to iron oxides in paddy-field soil and adheres onto graphite anodes, resulting in the boost of power outputs from RP-MFCs.

Microbial fuel cell: A green eco-friendly agent for tannery wastewater treatment and simultaneous bioelectricity/power generation

This review paper emphasised on the origin of hexavalent chromium toxicity in tannery wastewater and its remediation using novel Microbial Fuel Cell (MFC) technology, including electroactive bacteria, which are known as exoelectrogens, to simultaneously treat wastewater and its action in the production of bioenergy and the mechanism of Cr⁶⁺ reduction. Also, there are various parameters like electrode, pH, mode of operation, time of operation, and type of exchange membrane used for promising results shown in enhancing MFC production and remediation of Cr⁶⁺. Destructive anthropological activities, such as leather making and electroplating industries are key sources of hexavalent chromium contamination in aquatic repositories. When Cr⁶⁺ enters the food chain and enters the human body, it has the potential to cause cancer. MFC is a green innovation that generates energy economically through the reduction of toxic Cr⁶⁺ to less toxic Cr³⁺. The organic substrates utilized at the anode of MFC act as electrons (e^-) donors. This review also highlighted the utilization of cheap substrates to make MFCs more economically suitable and the energy production at minimum cost.

Dechlorination of dichloromethane by a biofilter enriched with electroactive bacteria: Performance, kinetics, and microbial community

Dichloromethane (DCM) is a recalcitrant volatile organic compound that exhibits biological toxicity and bioaccumulation. In this study, gaseous DCM was removed using an electroactive bacterial biofilter (EBB) with graphite rod as the anode and carbon felt as the cathode. The highest removal efficiency (97.09%) was achieved at a cathodic potential of -600 mV (vs. Ag/AgCl). The EBB had a maximum elimination capacity of 79.29 g m^-3 h^-1 when the inlet load was 96.48 g m^-3 h^-1. There was no substrate inhibition phenomenon observed in the EBB, and the Michaelis-Menten model was used to describe the kinetics of the EBB. High-throughput sequencing indicated that electroactive genera such as Rhodanobacter sp., Sphingomonas sp., Pseudomonas sp., Chryseobacterium sp., Pseudochrobactrum sp., and Mycobacterium sp. dominated the EBB. The microbial communities were stable and were slightly affected by the DCM inlet concentration. The results can be applied for the effective treatment of recalcitrant volatile organic compounds (VOCs).

Bioelectrochemical degradation of petroleum hydrocarbons: A critical review and future perspectives

As typical pollutants, petroleum hydrocarbons that are widely present in various environmental media such as soil, water, sediments, and air, seriously endanger living organisms and human health. In the meantime, as a green environmental technology that integrates pollutant removal and resource recovery, bioelectrochemical systems (BESs) have been extensively applied to the removal of petroleum hydrocarbons from the environment. This review introduces working principles of BESs, following which it discusses the different reactor structures, application progresses, and key optimization factors when treating water, sewage sludges, sediments, and soil. Furthermore, bibliometrics was first used in this field to analyze the evolution of knowledge structure and forecast future hot topics. The research focus has shifted from the early generation of bioelectric energy to exploring mechanisms of soil remediation and microbial metabolisms, which will be closely integrated in the future. Finally, the future prospects of this field are proposed. This review focuses on the research status of bioelectrochemical degradation of petroleum hydrocarbons and provides a scientific reference for subsequent research.

Microbial Remediation: A Promising Tool for Reclamation of Contaminated Sites with Special Emphasis on Heavy Metal and Pesticide Pollution: A Review

Heavy metal and pesticide pollution have become an inevitable part of the modern industrialized environment that find their way into all ecosystems. Because of their persistent nature, recalcitrance, high toxicity and biological enrichment, metal and pesticide pollution has threatened the stability of the environment as well as the health of living beings. Due to the environmental persistence of heavy metals and pesticides, they get accumulated in the environs and consequently lead to food chain contamination. Therefore, remediation of heavy metals and pesticide contaminations needs to be addressed as a high priority. Various physico-chemical approaches have been employed for this purpose, but they have significant drawbacks such as high expenses, high labor, alteration in soil properties, disruption of native soil microflora and generation of toxic by-products. Researchers worldwide are focusing on bioremediation strategies to overcome this multifaceted problem, i.e., the removal, immobilization and detoxification of pesticides and heavy metals, in the most efficient and cost-effective ways. For a period of millions of evolutionary years, microorganisms have become resistant to intoxicants and have developed the capability to remediate heavy metal ions and pesticides, and as a result, they have helped in the restoration of the natural state of degraded environs with long term environmental benefits. Keeping in view the environmental and health concerns imposed by heavy metals and pesticides in our society, we aimed to present a generalized picture of the bioremediation capacity of microorganisms. We explore the use of bacteria, fungi, algae and genetically engineered microbes for the remediation of both metals and pesticides. This review summarizes the major detoxification pathways and bioremediation technologies; in addition to that, a brief account is given of molecular approaches such as systemic biology, gene editing and omics that have enhanced the bioremediation process and widened its microbiological techniques toward the remediation of heavy metals and pesticides.

Response of 2,4,6-trichlorophenol-reducing biocathode to burial depth in constructed wetland sediments

Biocathode systems could be used for in-situ bioremediation of chlorophenols (CPs) in constructed wetland (CW) sediments. However, little is known regarding whether or how cathode burial depths affect the dechlorination of CPs in sediments. Here, 2,4,6-trichlorophenol (2,4,6-TCP)-dechlorinating biocathode systems were constructed under a cathode potential of - 0.7 V (vs. a saturated calomel electrode, SCE) at three different cathode burial depths (5, 10, and 15 cm). The 2,4,6-TCP removal efficiency and average transformation rate with the biocathode increased by 21.46-36.86% and 14.63-34.88% compared to those in the non-electrode groups. Deeper cathode burial depths enhanced the 2,4,6-TCP dechlorination performance. Furthermore, the oxidation-reduction potential (ORP) of the sediment decreased with sediment depth and the applied potential created a more favorable redox environment for the enrichment of functional bacteria. Deeper cathode burial depths also promoted the selective enrichment of electro-active and dechlorinating bacteria (e.g., Bacillus and Dehalobacter, respectively). The biocathode thus served as the carrier, electron source, and regulator of functional bacteria to accelerate the transformation of 2,4,6-TCP (2,4,6-TCP → 2,4-dichlorophenol → 4-chlorophenol → phenol) in sediments. These results offer insights into the effects of cathode burial depth on 2,4,6-TCP dechlorination in sediments from a redox environment and microbial community structure standpoint.

Synchronous Cr(VI) Remediation and Energy Production Using Microbial Fuel Cell from a Subsurface Environment: A Review

Applying microbial fuel cell (MFC) technology for eco-remediation of Cr(VI) pollution from a subsurface environment has great scientific value and practical significance due to its promising advantages of pollutant remediation and renewable energy generation. The aim of the current review is to summarize the migration characteristics of Cr(VI) in a subsurface soil/water environment and investigate the factors affecting the MFC performance for synchronous Cr(VI) remediation and power generation, and sequentially highlight diverse challenges of MFC technology for in situ remediation of subsurface groundwater and soils. The critical review put forward that Cr(VI) removal efficiency and energy production of MFC can be improved by enhancing the adjustability of cathode pH, setting potential, modifying electrode, and incorporating other technologies into MFC. It was recommended that designing typical large-scale, long-term continuous flow MFC systems, adding electron shuttle media or constructing artificial electron according to actual groundwater/soil and Cr(VI) pollution characteristics, site geology, and the hydrogeology condition (hydrochemical conditions, colloid type, and medium) are essential to overcome the limitations of the small size of the laboratory experiments and improve the application of technology to in situ Cr(VI) remediation. This review provided reference and ideas for future research of MFC-mediated onsite Cr(VI) remediation.

Realignment of phosphorus in lake sediment induced by sediment microbial fuel cells (SMFC)

Evidence has shown that phosphorus (P) deposited in sediments over multiple decades can be released by microbial activities, leading to recurring harmful algal blooms in several lakes. Sediment microbial fuel cells (SMFC) have been identified as an alternative in-situ approach for limiting P release from sediments to overlying water. However, the effects of SMFC on the micro-environment (pH) in vicinity of the electrodes, which could impact the P distribution, have often been ignored. This study successfully established SMFC systems to investigate their influence on P species and spatial distributions in lake sediments. The results showed that pH was relatively stable in the control group (6.8), while in the SMFC group the pH ranged from 4.63 to 8.26 along the sediment-water profile, suggesting that pH was highly affected by the SMFC system. The overlying water P concentration was much lower in the SMFC group (0.05 mg/L) than the control group (0.14 mg/L). However, P concentration in the sediment pore water of the SMFC group increased from 0.018 to 1.090 mg/L with depth. P fractions in the upper 4 cm of the sediments were highly affected by SMFC operation, but P fractions (i.e., NH₄Cl-P, BD-P, and OP) in the SMFC group were not significantly correlated with SRP (p > 0.05). There was a strong correlation between the soluble reactive P (SRP) in pore water and pH (r = -0.930, p < 0.01), suggesting that SRP in pore water was significantly affected by the pH decrease induced by SMFC.

Microbial Electrochemical Technologies for Sustainable Nitrogen Removal in Marine and Coastal Environments

For many years, the world's coastal marine ecosystems have received industrial waste with high nitrogen concentrations, generating the eutrophication of these ecosystems. Different physicochemical-biological technologies have been developed to remove the nitrogen present in wastewater. However, conventional technologies have high operating costs and excessive production of brines or sludge which compromise the sustainability of the treatment. Microbial electrochemical technologies (METs) have begun to gain attention due to their cost-efficiency in removing nitrogen and organic matter using the metabolic capacity of microorganisms. This article combines a critical review of the environmental problems associated with the discharge of the excess nitrogen and the biological processes involved in its biogeochemical cycle; with a comparative analysis of conventional treatment technologies and METs especially designed for nitrogen removal. Finally, current METs limitations and perspectives as a sustainable nitrogen treatment alternative and efficient microbial enrichment techniques are included.

Microbial activity enhancement in constructed wetlands operated as bioelectrochemical systems

Treatment wetlands (TW) operated as bioelectrochemical systems (BES-TW) provide a higher degree of treatment than conventional TW. Yet, the fundamental processes or mechanisms for the envisaged better performance of BES-TW over conventional TW remains poorly understood. This work aimed to determine to which extent microbial activity enhancement could be the reason behind this treatment performance increase. To this purpose, pilot-scale horizontal sub-surface flow BES-TW operated under three different configurations were continuously fed with real urban wastewater. BES-TW were evaluated for COD and ammonia removal efficiency, and two techniques of microbial activity assessment were applied. Configurations, tested in duplicate, were: control TWs without electrodes (C-TW), TWs operated as microbial fuel cells (MFC-TW), and TWs operated as microbial electrolysis cells (MEC-TW). Microbial activity was assessed by measuring the enzymatic activity (EA) (FDA hydrolysis technique) and the aerobic activity (AA) (estimated through respirometry). Results showed that BES-TW outperformed C-TW in terms of both microbial activity enhancement and contaminants removal efficiency, especially in the case of MEC-TW. More precisely, this configuration showed an average improvement of 17%, and 56% in COD removal and EA efficiencies, respectively, compared to C-TW. Regarding AA activity, although MEC-TW seemed to outperform the rest of the configurations, differences were not statistically significant. This work demonstrates that TWs operated as BES increase the overall enzymatic activity of the treatment bed and this, in turn, is the leading cause to a higher degree of treatment performance.

Accelerated bioremediation of a complexly contaminated river sediment through ZVI-electrode combined stimulation

Complexly contaminated river sediment caused by reducible and oxidizable organic pollutants is a growing global concern due to the adverse influence on ecosystem safety and planetary health. How to strengthen indigenous microbial metabolic activity to enhance biodegradation and mineralization efficiency of refractory composite pollutants is critical but poorly understood in environmental biotechnology. Here, a synergetic biostimulation coupling electrode with zero-valent iron (ZVI) was investigated for the bioremediation of river sediments contaminated by 2,4,6-tribromophenol (TBP, reducible pollutant) and hydrocarbons (oxidizable pollutants). The bioremediation efficiency of ZVI based biostimulation coupling electrode against TBP debromination and hydrocarbons degradation were 1.1-3 times higher than the electrode used solely, which was attributed to the shape of distinctive microbial communities and the enrichment of potential dehalogenators (like Desulfovibrio, Desulfomicrobium etc.). The sediment microbial communities were significantly positively correlated with the enhanced degradation efficiencies of TBP and hydrocarbons (P < 0.05). Moreover, the coupled system predominately increased positive microbial interactions in the ecological networks. The possible mutual relationship between microbes i.e., Thiobacillus (iron-oxidizing bacteria) and Desulfovibrio (dehalogenator) as well as Pseudomonas (electroactive bacteria) and Clostridium (hydrocarbons degraders) were revealed. This study proposed a promising approach for efficient bioremediation of complexly contaminated river sediments.

Organic matter composition, BaP biodegradation and microbial communities at sites near and far from the bioanode in a soil microbial fuel cell

Bioanodes in a soil microbial fuel cell (SMFC) can serve as sustainable electron acceptors in microbial metabolism processes; thus, SMFCs are considered a promising in situ bioremediation technology. Most related studies have focused on the removal efficiency of contaminants. Relatively few efforts have been made to comprehensively investigate the organic matter composition and biodegradation metabolites of organic contaminants and microbial communities at various distances from the bioanode. In this study, the level and composition of dissolved organic matter (DOM), biodegradation metabolites of benzo[a]pyrene (BaP), and microbial communities at two sites with different distances (S_1cm and S_11cm) to the bioanode were investigated in an SMFC. The consumption efficiency of dissolved organic carbon (R_DOC) and removal efficiency of BaP (R_BaP) at S_1cm were slightly higher than those at S_11cm after 100 days (R_DOC 47.82 ± 5.77% at S_1cm and 44.98 ± 10.76% at S_11cm; R_BaP 72.52 ± 1.88% at S_1cm and 68.50 ± 4.34% at S_11cm). More fulvic acid-like components and more low-molecular-weight metabolites (indicating a higher biodegradation degree) of BaP were generated at S_1cm than at S_11cm. The microbial community structures were similar at the two sites. Electroactive bacteria (EAB) and some polycyclic aromatic hydrocarbon degraders were both enriched at the bioanode. Energy metabolism at the bioanode could be upregulated to generate more adenosine triphosphate (ATP). In conclusion, the bioanode could modulate the metabolic pathways in the adjacent soil by strengthening the contact between the EAB and BaP degraders, and providing more ATP to the BaP degraders.

SMFC as a tool for the removal of hydrocarbons and metals in the marine environment: a concise research update

Marine pollution is becoming more and more serious, especially in coastal areas. Because of the sequestration and consequent accumulation of pollutants in sediments (mainly organic compounds and heavy metals), marine environment restoration cannot exempt from effective remediation of sediments themselves. It has been well proven that, after entering into the seawater, these pollutants are biotransformed into their metabolites, which may be more toxic than their parent molecules. Based on their bioavailability and toxic nature, these compounds may accumulate into the living cells of marine organisms. Pollutants bioaccumulation and biomagnification along the marine food chain lead to seafood contamination and human health hazards. Nowadays, different technologies are available for sediment remediation, such as physicochemical, biological, and bioelectrochemical processes. This paper gives an overview of the most recent techniques for marine sediment remediation while presenting sediment-based microbial fuel cells (SMFCs). We discuss the issues, the progress, and future perspectives of SMFC application to the removal of hydrocarbons and metals in the marine environment with concurrent energy production. We give an insight into the possible mechanisms leading to sediment remediation, SMFC energy balance, and future exploitation.

Substrate salinity: A critical factor regulating the performance of microbial fuel cells, a review

Substrate salinity is a critical factor influencing microbial fuel cells (MFCs) performance and various studies have suggested that increasing substrate salinity first improves MFC performance. However, a further increase in salinity that exceeds the salinity tolerance of exoelectrogens shows negative effects because of inhibited bacterial activity and increased activation losses. In this review, electricity generation and contaminant removal from saline substrates using MFCs are summarized, and results show different optimal salinities for obtaining maximum performance. Then, electroactive bacteria capable of tolerating saline environments and strategies for improving salinity tolerance are discussed. In addition to ohmic resistance and bacterial activity, membrane resistance and catalyst performance will also be affected by substrate salinity, all of which jointly contribute the final overall MFC performance. Therefore, the combined effect of salinity is analyzed to illustrate how the MFC performance changes with increasing salinity. Finally, the challenges and perspectives of MFCs operated in saline environments are discussed.

Long-distance electron transfer in a filamentous Gram-positive bacterium

Long-distance extracellular electron transfer has been observed in Gram-negative bacteria and plays roles in both natural and engineering processes. The electron transfer can be mediated by conductive protein appendages (in short unicellular bacteria such as Geobacter species) or by conductive cell envelopes (in filamentous multicellular cable bacteria). Here we show that Lysinibacillus varians GY32, a filamentous unicellular Gram-positive bacterium, is capable of bidirectional extracellular electron transfer. In microbial fuel cells, L. varians can form centimetre-range conductive cellular networks and, when grown on graphite electrodes, the cells can reach a remarkable length of 1.08 mm. Atomic force microscopy and microelectrode analyses suggest that the conductivity is linked to pili-like protein appendages. Our results show that long-distance electron transfer is not limited to Gram-negative bacteria.

Microbial fuel cell improves restoration of Hydrilla verticillata in an algae-rich sediment microcosm system

Settled algae may be used as nutrient for macrophyte establishment, but also can induce marked macrophyte decline during deep anaerobic decomposition. Sediment microbial fuel cells (SMFCs) may promote the utilization of algae-derived nutrients and relieve bio-toxicity from settled algae to submerged macrophytes, thus facilitating plant production. To test these hypotheses, a 62-day comparative study was designed and conducted in microcosms with the following six treatments: control (open-circuit SMFC), plant (open-circuit SMFC with plants), algae (open-circuit SMFC with algae), algae-plant (open-circuit SMFC with algae and plants), algae-SMFC (closed-circuit SMFC with algae), and algae-plant-SMFC (closed-circuit SMFC with algae and plants). The results showed that the presence of Hydrilla verticillata improved the power generation of SMFCs when algae were used as substrates during the whole operation. The decomposition of sedimented algae experienced two periods since the injection. During the slight decomposition period (14-38 day), the algal retention in sediments was enhanced by H. verticillata as a nutrient source. Nitrogen (N) assimilation in plant shoots was facilitated under electrogenesis due to a simultaneous increase of algae-derived dissolved inorganic carbon (DIC) and ammonium (NH₄⁺) in the water column. At the end of the 38th day, the biomass of H. verticillata were increased by 21.4% and 52.3%, respectively, in the algae-plant and algae-plant-SMFC, compared with that in plant treatment. Obvious NH₄⁺-stress was exerted on H. verticillata during the following intense algal decomposition period (38-62 day). Compared with shoots, roots of H. verticillata were more sensitive to the biotoxicity of algae-derived NH₄⁺. The electrogenetic process diverted the degradation pathway from acetoclastic methanogenesis to electrogenesis via redox cycle, resulting in delayed algal decomposition in algae-SMFC treatment. In addition, electrogenesis enhanced the removal of algae-derived N. As a result, NH₄⁺ toxicity to plant roots was effectively alleviated, and sedimented algae served as a stable nutrient source for plant development. Stable transfer rate of algae-derived N from sediments to plant roots was observed, while the assimilation rate of algae-derived N from water column to plant shoots showed a constant increase in the algae-plant-SMFC treatment. Electrogenesis enhanced N-fixing capacity belonged to rhizosphere of H. verticillata, evidenced by greater enrichment of some plant growth-promoting rhizobacteria (PGPRs), including Bradyrhizobium, Mycobacterium, Paenibacillus, Mesorhizobium, and Roseomonas in the algae-plant-SMFC treatment. At the end of the experiment, marked increases in the production of H. verticillata in algae-plant-SMFC were observed, with 90.1% and 32.8%, respectively, when compared with algae-plant and plant treatments (p < 0.05). SMFC application could be used as a strategy to promote the growth of submerged macrophytes in algae-rich sediments.

Microorganisms in sediment microbial fuel cells: Ecological niche, microbial response, and environmental function

A sediment microbial fuel cell (SMFC) is a device that harvests electrical energy from sediments rich in organic matter. SMFCs have been attracting increasing amounts of interest in environmental remediation, since they are capable of providing a clean and inexhaustible source of electron donors or acceptors and can be easily controlled by adjusting the electrochemical parameters. The microorganisms inhabiting sediments and the overlying water play a pivotal role in SMFCs. Since the SMFC is applied in an open environment rather than in an enclosed chamber, the effects of the environment on the microbes should be intense and the microbial community succession should be extremely complex. Thus, this review aims to provide an overview of the microorganisms in SMFCs, which few previous review papers have reported. In this study, the anodic and cathodic niches for the microorganisms in SMFCs are summarized, how the microbial population and community interact with the SMFC environment is discussed, a new microbial succession strategy called the electrode stimulation succession is proposed, and recent developments in the environmental functions of SMFCs are discussed from the perspective of microorganisms. Future studies are needed to investigate the electrode stimulation succession, the environmental function and the electron transfer mechanism in order to boost the application of SMFCs for power generation and environmental remediation.

Mechanisms and challenges of microbial fuel cells for soil heavy metal(loid)s remediation

Bioelectrochemical approaches offer a simple, effective, and environmentally friendly solution to pollutant remediation. As a versatile technology, although many studies have shown its potential in soil heavy metal(loid) remediation, the mechanism behind this process is not simple or well-reviewed. Thus, in this review we summarized the impacts of the microbial fuel cells (MFCs) on metal (loids) movement and transformation in the soil environment in terms of changes in soil pH, electromigration, and substrate competition between anode-respiring bacteria and the soil microbial community. Furthermore, the progress of MFCs in the fixation/removal of different elements from the soil environment is described. Hence, this review provides critical insight into the use of the MFC for soil metal(loid) bioremediation.

Enhanced Hydrocarbons Biodegradation at Deep-Sea Hydrostatic Pressure with Microbial Electrochemical Snorkels

In anaerobic sediments, microbial degradation of petroleum hydrocarbons is limited by the rapid depletion of electron acceptors (e.g., ferric oxide, sulfate) and accumulation of toxic metabolites (e.g., sulfide, following sulfate reduction). Deep-sea sediments are increasingly impacted by oil contamination, and the elevated hydrostatic pressure (HP) they are subjected to represents an additional limitation for microbial metabolism. While the use of electrodes to support electrobioremediation in oil-contaminated sediments has been described, there is no evidence on their applicability for deep-sea sediments. Here, we tested a passive bioelectrochemical system named ”oil-spill snorkel” with two crude oils carrying different alkane contents (4 vs. 15%), at increased or ambient HP (10 vs. 0.1 MPa). Snorkels enhanced alkanes biodegradation at both 10 and 0.1 MPa within only seven weeks, as compared to nonconductive glass controls. Microprofiles in anaerobic, contaminated sediments indicated that snorkels kept sulfide concentration to low titers. Bulk-sediment analysis confirmed that sulfide oxidation by snorkels largely regenerated sulfate. Hence, the sole application of snorkels could eliminate a toxicity factor and replenish a spent electron acceptor at increased HP. Both aspects are crucial for petroleum decontamination of the deep sea, a remote environment featured by low metabolic activity.

Combined bioaugmentation with electro-biostimulation for improved bioremediation of antimicrobial triclocarban and PAHs complexly contaminated sediments

Haloaromatic antimicrobial triclocarban (TCC) is an emerging refractory contaminant that commonly coexisted with conventional contaminants such as polycyclic aromatic hydrocarbons (PAHs). TCC may negatively affect the metabolic activity of sediment microorganisms and persist in environment; however, remediation methods that relieve the TCC inhibitory effect in sediments remain unknown. Here, a novel electro-biostimulation and bioaugmentation combined remediation system was proposed by the simultaneous introduction of a TCC-degrading Ochrobactrum sp. TCC-2 and electrode into the TCC and PAHs co-contaminated sediments. Results indicated the PAHs and TCC degradation efficiencies of the combined system were 2.9-3.0 and 4.6 times respectively higher than those of the control group (no electro-biostimulation and no bioaugmentation treatments). The introduced strain TCC-2 and the enriched electroactive bacteria and PAHs degraders (e.g. Desulfobulbus, Clostridium, and Paenarthrobacter) synergistically contributed to the accelerated degradation of PAHs and TCC. The preferential elimination of the TCC inhibitory effect through bioaugmentation treatment could restore microbial functions by increasing the functional gene abundances related to various metabolic processes. This study offers new insights into the response of sediment functional communities to TCC stress, electro-biostimulation and bioaugmentation operations and provides a promising system for the enhanced bioremediation of the PAHs and TCC co-contaminated sediments.

Biohybrid Conjugated Polymer Materials for Augmenting Energy Conversion of Bioelectrochemical Systems

Bioelectrochemical systems (BESs) provide favorable opportunities for the sustainable conversion of energy from biological metabolism. Biological photovoltaics (BPVs) and microbial fuel cells (MFCs) respectively realize the conversion of renewable solar energy and bioenergy into electrical energy by utilizing electroactive biological extracellular electron transfer, however, along with this energy conversion progress, relatively poor durability and low output performance are challenges as well as opportunities. Advances in improving bio-electrode interface compatibility will help to solve the problem of insufficient performance and further have a far-reaching impact on the development of bioelectronics. Conjugated polymers (CPs) with specific optical and electrical properties (absorption and emission spectra, energy band structure and electrical conductivity) afforded by π-conjugated backbones are conducive to enhancing the electron generation and output capacity of electroactive organisms. Furthermore, the water solubility, functionality, biocompatibility and mechanical properties optimized through appropriate modification of side chain provide a more adaptive contact interface between biomaterials and electrodes. In this minireview, we summarize the prominent contributions of CPs in the aspect of augmenting the photovoltaic response of BPVs and power supply of MFCs, and specifically discussed the role of CPs with expectation to provide inspirations for the design of bioelectronic devices in the future.

Microbial community evolution during the aerobic biodegradation of petroleum hydrocarbons in marine sediment microcosms: Effect of biostimulation and seasonal variations

Evolution of the microbial community structure in crude oil contaminated marine sediments was assessed under aerobic biodegradation during wet (18 °C) and dry (28 °C) seasons experiments, to account for seasonal variations in nutrients and temperature, under biostimulation and natural attenuation conditions. NMDS showed significant variation in the microbial communities between the wet and the dry season experiments, and between the biostimulation and the natural attenuation treatments in the dry season microcosms. No significant variation in the microbial community and oil biodegradation was observed during the wet season experiments due to high background nitrogen levels eliminating the effect of biostimulation. Larger variations were observed in the dry season experiments and were correlated to enhanced alkanes removal in the biostimulated microcosms, where Alphaproteobacteria dominated the total microbial community by the end of biodegradation (54%). Many hydrocarbonoclastic bacterial genera showed successive dominance during the operation affecting the ultimate performance of the microcosms.

An overview on heavy metal resistant microorganisms for simultaneous treatment of multiple chemical pollutants at co-contaminated sites, and their multipurpose application

Anthropogenic imbalance of chemical pollutants in environment raises serious threat to all life forms. Contaminated sites often possess multiple heavy metals and other types of pollutants. Elimination of chemical pollutants at co-contaminated sites is imperative for the safe ecosystem functions, and simultaneous removal approach is an attractive scheme for their remediation. Different conventional techniques have been applied as concomitant treatment solution but fall short at various parameters. In parallel, use of microorganisms offers an innovative, cost effective and ecofriendly approach for simultaneous treatment of various chemical pollutants. However, microbiostasis due to harmful effects of heavy metals or other contaminants is a serious bottleneck facing remediation practices in co-contaminated sites. But certain microorganisms have unique mechanisms to resist heavy metals, and can act on different noxious wastes. Considering this significant, my review provides information on different heavy metal resistant microorganisms for bioremediation of different chemical pollutants, and other assistance. In this favour, the integrated approach of simultaneous treatment of multiple heavy metals and other environmental contaminants using different heavy metal resistant microorganisms is summarized. Further, the discussion also intends toward the use of heavy metal resistant microorganisms associated with industrial and environmental applications, and healthcare. PREFACE: Simultaneous treatment of multiple chemical pollutants using microorganisms is relatively a new approach. Therefore, this subject was not well received for review before. Also, multipurpose application of heavy metal microorganisms has certainly not considered for review. In this regard, this review attempts to gather information on recent progress on studies on different heavy metal resistant microorganisms for their potential of treatment of co-contaminated sites, and multipurpose application.

Chemical contamination can promote turnover diversity of benthic prokaryotic assemblages: The case study of the Bagnoli-Coroglio bay (southern Tyrrhenian Sea)

Chemical contamination of marine ecosystems represents a major concern for the detrimental consequences at different levels of biological organization. However, the impact of chronic contamination on the diversity and assemblage composition of benthic prokaryotes is still largely unknown, and this limits our understanding of the potential implications on ecosystem functioning. The Bagnoli-Coroglio bay (Gulf of Naples, Tyrrhenian Sea) is a typical example of coastal area heavily contaminated by metals and hydrocarbons, released for decades by industrial activities, which ceased at the beginning of nineties. In the present study we analyzed the abundance, diversity and assemblage composition of benthic prokaryotic assemblages at increasing distance from the historical source of contamination in relation to the heavy hydrocarbons (C > 12), polycyclic aromatic hydrocarbons (PAHs) and heavy metal concentrations in the sediments. Prokaryotic abundance in the sediments differed among sites, and was mostly driven by environmental factors rather than by contamination levels. Conversely, the richness of prokaryotic taxa was relatively high in all samples, was driven by contamination levels and decreased significantly with increasing contamination (15-38%). Moreover, our results indicate large variations in the composition of the benthic prokaryotic assemblages among sites, mostly explained by the different levels and types of chemical contaminants found in the sediments. Overall, our findings suggest that chemical contaminants, even after decades from the end of their release, can profoundly influence the richness and turnover diversity of the benthic prokaryotic assemblages, in turn promoting a high diversification of the benthic bacterial and archaeal assemblages by selecting those lineages more adapted to specific mixtures of different contaminants. Our results open new perspectives for understanding of the long-term effects of chemical contamination on the benthic prokaryotic assemblages and the ecological processes they mediate.

Insights into Advancements and Electrons Transfer Mechanisms of Electrogens in Benthic Microbial Fuel Cells

Benthic microbial fuel cells (BMFCs) are a kind of microbial fuel cell (MFC), distinguished by the absence of a membrane. BMFCs are an ecofriendly technology with a prominent role in renewable energy harvesting and the bioremediation of organic pollutants through electrogens. Electrogens act as catalysts to increase the rate of reaction in the anodic chamber, acting in electrons transfer to the cathode. This electron transfer towards the anode can either be direct or indirect using exoelectrogens by oxidizing organic matter. The performance of a BMFC also varies with the types of substrates used, which may be sugar molasses, sucrose, rice paddy, etc. This review presents insights into the use of BMFCs for the bioremediation of pollutants and for renewable energy production via different electron pathways.

Centimeter-Long Microbial Electron Transport for Bioremediation Applications

Microbial bioremediation based on nano- to micrometer-scale electron transport has been intensively studied during the past decade, but its application can be hindered by a deficiency of suitable electron acceptors or slow mass transportation at contaminated sites. Microbial long-distance electron transport (LDET), which can couple spatially separated redox reactions across distances in natural environments, has recently emerged at centimeter-length scales. LDET explains a range of globally important biogeochemical phenomena and overcomes the drawbacks of conventional bioremediation by directly linking distant electron donors and acceptors. Here, we highlight recent research outcomes in examining, characterizing, and engineering LDET, and describe how LDET can be exploited to develop advanced technologies for the bioremediation of soils and sediments.

Electrochemistry-stimulated environmental bioremediation: Development of applicable modular electrode and system scale-up

Bioelectrochemical systems (BESs) have been studied extensively during the past decades owing primarily to their versatility and potential in addressing the water-energy-resource nexus. In stark contrast to the significant advancements that have been made in developing innovative processes for pollution control and bioresource/bioenergy recovery, minimal progress has been achieved in demonstrating the feasibility of BESs in scaled-up applications. This lack of scaled-up demonstration could be ascribed to the absence of suitable electrode modules (EMs) engineered for large-scale application. In this study, we report a scalable composite-engineered EM (total volume of 1 m³), fabricated using graphite-coated stainless steel and carbon felt, that allows integrating BESs into mainstream wastewater treatment technologies. The cost-effectiveness and easy scalability of this EM provides a viable and clear path to facilitate the transition between the success of the lab studies and applications of BESs to solve multiple pressing environmental issues at full-scale.

Electrochemical Bacterial Enrichment from Natural Seawater and Its Implications in Biocorrosion of Stainless-Steel Electrodes

Microbial electrochemical technologies have revealed the opportunity of electrochemical enrichment for specific bacterial groups that are able to catalyze reactions of interest. However, there are unsolved challenges towards their application under aggressive environmental conditions, such as in the sea. This study demonstrates the impact of surface electrochemical potential on community composition and its corrosivity. Electrochemical bacterial enrichment was successfully carried out in natural seawater without nutrient amendments. Experiments were carried out for ten days of exposure in a closed-flow system over 316L stainless steel electrodes under three different poised potentials (−150 mV, +100 mV, and +310 mV vs. Ag/AgCl). Weight loss and atomic force microscopy showed a significant difference in corrosion when +310 mV (vs. Ag/AgCl) was applied in comparison to that produced under the other tested potentials (and an unpoised control). Bacterial community analysis conducted using 16S rRNA gene profiles showed that poised potentials are more positive as +310 mV (vs. Ag/AgCl) resulted in strong enrichment for Rhodobacteraceae and Sulfitobacter. Hence, even though significant enrichment of the known electrochemically active bacteria from the Rhodobacteraceae family was accomplished, the resultant bacterial community could accelerate pitting corrosion in 316 L stainless steel, thereby compromising the durability of the electrodes and the microbial electrochemical technologies.

Mitigation effects of the microbial fuel cells on heavy metal accumulation in rice (Oryza sativa L.)

The increase in toxic heavy metal pollutants in rice paddies threatens food safety. There is an urgent need for lnow-cost remediation technology for immobilizing these trace metals. In this study, we showed that the application of the soil microbial fuel cell (sMFC) can greatly reduce the accumulation of Cd, Cu, Cr, and Ni in the rice plant tissue. In the sMFC treatment, the accumulation of Cd, Cu, Cr, and Ni in rice grains was 35.1%, 32.8%, 56.9% and 21.3% lower than the control, respectively. The reduction of these elements in the rice grain was due to their limited mobility in the soil porewater of soils employing the sMFC. The restriction in Cd, Cu, Cr, and Ni bioavailability was ascribed to the sMFC ability to immobilize trace metals through both biotic and abiotic means. The results suggest that the sMFC may be used as a promising technique to limit toxic trace metal bioavailability and translocation in the rice plants.

Isolation of two iron-reducing facultative anaerobic electricigens and probing the application performance in eutrophication water

Purpose

Sediment microbial fuel cell (SMFC) is a promising bioremediation technology in which microbes play an important role. Electricigens as the bio-catalysts have effect on pollution control and electricity generation. It is of great significance to screen the microorganisms with the ability of generating electricity.

Methods

The SMFC anode biofilm was used as microbiological source to study the feasibility of electricigens with iron-reducing property for eutrophication water treatment. Preliminarily, we isolated 20 facultative anaerobic pure bacteria and evaluated their cyclic voltammogram (CV) through the three-electrode system and electrochemical workstation. The power generation performance of strains was verified by air-cathode microbial fuel cells (AC-MFCs) under different single carbon sources.

Result

According to its morphological, physiological, and biochemical characteristics, along with phylogenetic analysis, the two strains (SMFC-7 and SMFC-17) with electrical characteristics were identified as Bacillus cereus. Compared with SMFC-7, SMFC-17 exhibited efficient NH4+-N and NO3−-N removal and PO43−-P accumulation from eutrophic solution with a removal rate of 79.91 ± 6.34% and 81.26 ± 1.11% and accumulation rate of 57.68 ± 4.36%, respectively.

Conclusion

The isolated bacteria SMFC-17 showed a good performance in eutrophic solution, and it might be a useful biocatalyst to enable the industrialized application of SMFC in eutrophic water treatment.

Fate, risk and removal of triclocarban: A critical review

The halogenated antimicrobial triclocarban (TCC) has large production and consumption over last decades. Its extensive utilization in personal care products and insufficient treatment in conventional wastewater treatment plants (WWTPs) has led to its listing as one of emerging organic contaminants (EOCs). Due to the hydrophobicity and chemical stability of TCC, it has been omnipresent detected in terrestrial and aquatic environments, and its prolonged exposure has thrown potential pernicious threat to ecosystem and human health. Considering its recalcitrance, especially under anoxic conditions, both biological and non-biological methods have been exploited for its removal. The efficiency of advanced oxidation processes was optimistic, but complete removal can rarely be realized through a single method. The biodegradation of TCC either with microbial community or pure culture is feasible but efficient bacterial degraders and the molecular mechanism of degradation need to be further explored. This review provides comprehensive information of the occurrence, potential ecological and health effects, and biological and non-biological removal of TCC, and outlines future prospects for the risk evaluation and enhanced bioremediation of TCC in various environments.

Biosurfactants and Synthetic Surfactants in Bioelectrochemical Systems: A Mini-Review

Bioelectrochemical systems (BESs) are ruled by a complex combination of biological and abiotic factors. The interplay of these factors determines the overall efficiency of BES in generating electricity and treating waste. The recent progress in bioelectrochemistry of BESs and electrobiotechnology exposed an important group of compounds, which have a significant contribution to operation and efficiency: surface-active agents, also termed surfactants. Implementation of the interfacial science led to determining several effects of synthetic and natural surfactants on BESs operation. In high pH, these amphiphilic compounds prevent the cathode electrodes from biodeterioration. Through solubilization, their presence leads to increased catabolism of hydrophobic compounds. They interfere with the surface of the electrodes leading to improved biofilm formation, while affecting its microarchitecture and composition. Furthermore, they may act as quorum sensing activators and induce the synthesis of electron shuttles produced by electroactive bacteria. On the other hand, the bioelectrochemical activity can be tailored for new, improved biosurfactant production processes. Herein, the most recent knowledge on the effects of these promising compounds in BESs is discussed.

Fungi as potential tool for polluted port sediment remediation

Contaminated sediments represent an important management problem that also concerns their remediation. Indeed, port dredging activities produce huge volumes of contaminated sediments that, in turn, require proper handling because of their quantity of inorganic and organic substances. Conventional management-remediation strategies of polluted sediment involve sediment washing, electron-chemical separation, and thermal treatment. Recently, bioremediation strategies have also been proposed as a promising answer to the problem of contaminated sediments. In this context, fungi are pioneer microorganisms known to bioconcentrate, bioaccumulate, and biostabilize heavy metals. These capabilities suggest the potential to employ indigenous fungal strains to remediate polluted port sediments. In the framework of the European Project SEDITERRA (Guidelines for the sustainable treatment of dredged sediments in the Marittimo area), the aim of this paper is to characterize the fungal communities of port sediments of Genoa and present an innovative mycoremediation protocol to evaluate the capability of indigenous fungal strains in the heavy metal remediation. In this study, Penicillium expansum Link and Paecilomyces formosus (Sakag., May. Inoue & Tada) Houbraken & Samson have been selected as fungal species for the mycoremediation treatments. The protocol requires a fungal membrane system and the results highlight efficient bioremoval of Cu and Zn from sediments.

Dominance of electroactive microbiomes in bioelectrochemical remediation of hydrocarbon-contaminated soils with different textures

Bioelectrochemical systems (BESs) are known to enhance the remediation of hydrocarbon-contaminated soil and sediments compared with natural attenuation, and the primary mechanism has been assumed as anaerobic degradation facilitated by electroactive bacteria (EAB) using the electrode as electron acceptor. However, known EAB were rarely found on the anodes of reported BESs, which challenged the fundamental mechanism of BESs although significant current generation was always observed during degradation of these recalcitrant substrates. This study however found the abundant EAB Geobacter (∼27.3%) in the anodic biofilms, which confirmed the role of electroactive bio-anode on the conversion of hydrocarbons into the current for the enhancement of remediation. Widespread occurrence of aerobic hydrocarbon-degrading bacteria (HDB) (e.g. ∼24.0% Parvibaculum and ∼30.6% Pseudomonas) was observed in soils with limited dissolved oxygen (∼0.4 mg/L). The higher abundance of dehydrogenase genes was found in the anode biofilms than that in soils, indicating anodic microorganisms may be mainly responsible for the removal of intermediates of aerobic hydrocarbons degradation in soils. High water saturation level and sandy soil texture showed positive impacts on bioelectrochemical remediation, while clay soil and unsaturation condition pose challenges in mass transfers in the matrix. The reactor performance was consistent with the phylogenetic molecular ecological network (pMENs) analysis, which showed that sandy soil BESs had tighter microbial network interactions than clay soil reactors.

Remediation of simulated malodorous surface water by columnar air-cathode microbial fuel cells

Malodorous surface water is an important worldwide environmental concern. Current remediation methods, such as aeration or the addition of chemicals, are not eco-friendly due to their high energy consumption or secondary pollution. This study proposed a modified columnar air-cathode microbial fuel cell as a sustainable and effective remediation module to improve water quality. The excellent and economic sheet air-cathode (activated carbon and carbon black as the catalyst layer) and a carbon brush anode were applied in the columnar air-cathode microbial fuel cell (MFC). The results after 48 h showed that by providing the anode as an electron acceptor and enriching electrochemically-active bacteria, MFCs with different external resistances (5 k Ω, 30 Ω, and 2 Ω) exhibited the much better capacity to improve water quality than the Blank group. The maximum COD and sulfide removal rates in the MFCs were approximately 86.3% and 100%, respectively, which were higher than those of the Blank group by 30% and 35%, respectively. The MFCs also showed maximum sulfate increments from 28 mg L^-1 to 98 mg L^-1 compared with the sulfate reduction to 10 mg L^-1 in the Blank group. The oxidation reduction potential (ORP) of the MFCs dramatically increased from -281.2 mV to -135.7 mV after 24 h, whereas the ORP of the Blank group decreased to -287.7 mV. The enrichment of the aerobic bacteria Acinetobacter on the anodes and chemolithoautotrophic sulfide oxidation bacteria Sulfuricurvum, Thiovirga and Thiobacillus in the MFCs could also contribute to COD and sulfide removal. Cathode reduction, which could produce small amounts of hydroxyl radicals, might assist with the ORP elevation and the complete oxidation of dissolved sulfide to sulfate.

Enhancing the power performance of sediment microbial fuel cells by novel strategies: Overlying water flow and hydraulic-driven cathode rotating

Sediment microbial fuel cells (SMFCs) are promising power sources for environmental monitoring in remote areas and environment-friendly solutions to river sediment contamination. However, cathodic limitations will significantly decrease power performance and limit its practical application. In this work, the control SMFC (SMFC-C) with cathode horizontally and fully submerged below the overlying water, and the hydraulic-driven rotating cathode SMFC (SMFC-R) was constructed. Overlying water flow and hydraulic-driven cathode rotating as novel strategies for SMFCs towards field applications were proposed. Results demonstrated that better power performance under static condition was obtained in SMFC-R than in SMFC-C, that the overlying water flow could significantly increase the maximum power density (MPD) in SMFC-C over the static condition, and that the cathode rotating further improved MPD in SMFC-R. The MPD obtained under static condition were 26.5 mW/m² and 45.1 mW/m² in SMFC-C and SMFC-R, which increased to 38.8 mW/m² and 47.3 mW/m² under water flow and cathode rotating condition, respectively. Analyses on cathode potential, overlying water pH and dissolved oxygen suggested severe cathodic limitations in SMFC-C under static condition which could be diminished by overlying water flow. However, almost no such limitations were observed in SMFC-R even under static condition, which is probably due to the fact that the cathodic oxygen reaction in SMFC-R mainly occurred on the cathode exposed to the air rather than on that submerged below the water. Identical anode performance was obtained in both SMFCs under different conditions, which were not an influencing factor leading to different power performance.