Application of redox mediators in bioelectrochemical systems

Microbial Biofilms: Features of Formation and Potential for Use in Bioelectrochemical Devices

Microbial biofilms present one of the most widespread forms of life on Earth. The formation of microbial communities on various surfaces presents a major challenge in a variety of fields, including medicine, the food industry, shipping, etc. At the same time, this process can also be used for the benefit of humans-in bioremediation, wastewater treatment, and various biotechnological processes. The main direction of using electroactive microbial biofilms is their incorporation into the composition of biosensor and biofuel cells This review examines the fundamental knowledge acquired about the structure and formation of biofilms, the properties they have when used in bioelectrochemical devices, and the characteristics of the formation of these structures on different surfaces. Special attention is given to the potential of applying the latest advances in genetic engineering in order to improve the performance of microbial biofilm-based devices and to regulate the processes that take place within them. Finally, we highlight possible ways of dealing with the drawbacks of using biofilms in the creation of highly efficient biosensors and biofuel cells.

2-Hydroxy-1,4-Naphthoquinone: A Promising Redox Mediator for Minimizing Dissolved Organic Nitrogen and Eutrophication Effects of Wastewater Effluent

Researchers and engineers are committed to finding effective approaches to reduce dissolved organic nitrogen (DON) to meet more stringent effluent total nitrogen limits and minimize effluent eutrophication potential. Here, we provided a promising approach by adding specific doses of 2-hydroxy-1,4-naphthoquinone (HNQ) to postdenitrification bioreactors. This approach of adding a small dosage of 0.03-0.1 mM HNQ effectively reduced the concentrations of DON in the effluent (ANOVA, p < 0.05) by up to 63% reduction of effluent DON with a dosing of 0.1 mM HNQ when compared to the control bioreactors. Notably, an algal bioassay indicated that DON played a dominant role in stimulating phytoplankton growth, thus effluent eutrophication potential in bioreactors using 0.1 mM HNQ dramatically decreased compared to that in control bioreactors. The microbe-DON correlation analysis showed that HNQ dosing modified the microbial community composition to both weaken the production and promote the uptake of labile DON, thus minimizing the effluent DON concentration. The toxic assessment demonstrated the ecological safety of the effluent from the bioreactors using the strategy of HNQ addition. Overall, HNQ is a promising redox mediator to reduce the effluent DON concentration with the purpose of meeting low effluent total nitrogen levels and remarkably minimizing effluent eutrophication effects.

Performance and mechanism of a bioelectrochemical system for reduction of heavy metal cadmium ions

This study explores the removal of Cd(ii) from wastewater using a microbial electrolysis cell (MEC) to investigate the electrochemical performance and removal kinetics of an anodic polarity reversal biocathode and the mechanism of action of electrochemically active bacteria. Comparative electrochemical methods showed that using an anodic polarity reversal biocathode resulted in greater than 90% removal of different concentrations of Cd(ii) within three days, which may be related to the catalytic effect of anodic electrochemically active bacteria. However, due to the ability of bacteria to regulate, up to nearly 2 mg L-1 of Cd(ii) ions will remain in solution. As shown by the linear fitting relationship between scanning speed and peak current, the removal process was dominated by adsorption control for 20-80 mg L-1 Cd(ii) and diffusion control for 100 mg L-1 Cd(ii). The analysis of raw sludge and sludge containing Cd(ii) showed that Arcobacter and Pseudomonas were the primary cadmium-tolerant bacteria, and that the ability to remove Cd(ii) was the result of a synergistic collaboration between autotrophic and heterotrophic Gram-negative bacteria.

Engineering extracellular electron transfer pathways of electroactive microorganisms by synthetic biology for energy and chemicals production

The excessive consumption of fossil fuels causes massive emission of CO2, leading to climate deterioration and environmental pollution. The development of substitutes and sustainable energy sources to replace fossil fuels has become a worldwide priority. Bio-electrochemical systems (BESs), employing redox reactions of electroactive microorganisms (EAMs) on electrodes to achieve a meritorious combination of biocatalysis and electrocatalysis, provide a green and sustainable alternative approach for bioremediation, CO2 fixation, and energy and chemicals production. EAMs, including exoelectrogens and electrotrophs, perform extracellular electron transfer (EET) (i.e., outward and inward EET), respectively, to exchange energy with the environment, whose rate determines the efficiency and performance of BESs. Therefore, we review the synthetic biology strategies developed in the last decade for engineering EAMs to enhance the EET rate in cell-electrode interfaces for facilitating the production of electricity energy and value-added chemicals, which include (1) progress in genetic manipulation and editing tools to achieve the efficient regulation of gene expression, knockout, and knockdown of EAMs; (2) synthetic biological engineering strategies to enhance the outward EET of exoelectrogens to anodes for electricity power production and anodic electro-fermentation (AEF) for chemicals production, including (i) broadening and strengthening substrate utilization, (ii) increasing the intracellular releasable reducing equivalents, (iii) optimizing c-type cytochrome (c-Cyts) expression and maturation, (iv) enhancing conductive nanowire biosynthesis and modification, (v) promoting electron shuttle biosynthesis, secretion, and immobilization, (vi) engineering global regulators to promote EET rate, (vii) facilitating biofilm formation, and (viii) constructing cell-material hybrids; (3) the mechanisms of inward EET, CO2 fixation pathway, and engineering strategies for improving the inward EET of electrotrophic cells for CO2 reduction and chemical production, including (i) programming metabolic pathways of electrotrophs, (ii) rewiring bioelectrical circuits for enhancing inward EET, and (iii) constructing microbial (photo)electrosynthesis by cell-material hybridization; (4) perspectives on future challenges and opportunities for engineering EET to develop highly efficient BESs for sustainable energy and chemical production. We expect that this review will provide a theoretical basis for the future development of BESs in energy harvesting, CO2 fixation, and chemical synthesis.

Recent Developments and Applications of Microbial Electrochemical Biosensors

This chapter provides a comprehensive overview of microbial electrochemical biosensors, which are a unique class of biosensors that utilize the metabolic activity of microorganisms to convert chemical signals into electrical signals. The principles and mechanisms of these biosensors are discussed, including the different types of microorganisms that can be used. The various applications of microbial electrochemical biosensors in fields such as environmental monitoring, medical diagnostics, and food safety are also explored. The chapter concludes with a discussion of future research directions and potential advancements in the field of microbial electrochemical biosensors.

Development of a novel three-dimensional biofilm-electrode system (3D-BES) loaded with Fe-modified biochars for enhanced pollutants removal in landfill leachate

Different mass ratio iron (Fe)-loaded biochars (FeBCs) were prepared from food waste and used in the three-dimensional biofilm-electrode systems (3D-BES) as particular electrodes for landfill leachate treatment. Compared to the unmodified biochar (BC), specific surface area of Fe-loaded biochars (FeBC-3 with a Fe: biochar of 0.2:1) increased from 63.01 m2/g to 184.14 m2/g, and pore capacity increased from 0.038 cm3/g to 0.111 cm3/g. FeBCs provided more oxygen-containing functional groups and exhibited excellent redox properties. Installed with FeBC-3 as particular electrode, both NH4+-N and chemical oxygen demand COD removals in 3D-BESs were well fitted with the pseudo-first-order model, with the maximum removal efficiencies of 98.6 % and 95.5 %, respectively. The batch adsorption kinetics experiments confirmed that the maximum NH4+-N (7.5 mg/g) and COD (21.8 mg/g) adsorption capacities were associated closely with the FeBC-3 biochar. In contrast to the 3D-BES with the unmodified biochar, Fe-loaded biochars significantly increased the abundance of microorganisms being capable of removing organics and ammonia. Meanwhile, the increased content of dehydrogenase (DHA) and electron transport system activity (ETSA) evidenced that FeBCs could enhance microbial internal activities and regulate electron transfer process among functional microorganisms. Consequently, it is concluded that Fe-loaded biochar to 3D-BES is effective in enhancing pollutant removals in landfill leachate and provided a reliable and effective strategy for refractory wastewater treatment.

The humic substance analogue antraquinone-2, 6-disulfonate (AQDS) enhanced zero-valent iron based autotrophic denitrification: Performances and mechanisms

Zero-valent iron based autotrophic denitrification (ZVI-AD) has attracted increasing attentions in nitrate removal due to saving organic carbon budget in wastewater treatment, but limited by the low reaction speed, poor electron transfer efficiency as well as the compaction/blocking by iron hydrolysis products. Humic substances (HS) were promising to regulate iron cycle and accelerate electron transfer by serving as electron mediators. In this study, HS analogue, antraquinone-2, 6-disulfonate (AQDS), was added to enhance ZVI-AD process. Results showed that the dosage of AQDS led to a NO3--N removal efficiency of 83.37 ± 3.98% within 96 h, which was 32.28 ± 1.25% higher than that in ZVI-AD system. The corrosion of ZVI and microbially nitrate reduction were both improved at the presence of AQDS. The addition of AQDS enriched the functional species, including autotrophic denitrobacteria namely Thauera and Hydrogenophaga, iron redox-related species namely Ferruginibacter and HS respiration related species namely Flavobacterium. The genes napA and napB related to electron transfer, nirK and nosZ related to the accumulation of intermediate products were also enriched by the addition of AQDS. AQDS addition boosted the electrons flowing to both abiotic and biotic nitrate reduction. Nitrate removal mechanism involved in ZVI-AQDS coupled system was proposed. This study provided an alternative strategy for improving ZVI-AD by HS.

Enhancement of Electricity Production in Microbial Fuel Cells Using a Biosurfactant-Producing Co-Culture

Microbial fuel cells are bio-electrochemical devices that enable the conversion of chemical energy into bioelectricity. In this manuscript, the use of biosurfactants (Tween 80 and surfactin) and the effect of coculturing E. coli and L. plantarum were used to investigate the generation of bioelectricity coming from an H-type microbial fuel cell. In this setup, E. coli acts as an electron donor while L. plantarum acts as an in situ biosurfactant producer. It was observed that the use of exogenous surfactants enhanced electricity production compared to conventional E. coli cultures. The utilization of Tween 80 and surfactin increased the power generation from 204 µW m-2 to 506 µW m-2 and 577 µW m-2, respectively. Furthermore, co-culturing E. coli and L. plantarum also resulted in a higher power output compared to pure cultures (132.8% more when compared to using E. coli alone and 68.1% more when compared to using L. plantarum alone). Due to the presence of surfactants, the internal resistance of the cell was reduced. The experimental evidence collected here clearly indicates that the production of endogenous surfactants, as well as the addition of exogenous surfactants, will enhance MFC electricity production.

Enhanced 4-bromophenol anaerobic biodegradation in electricity-stimulated anaerobic system: The key role of humic acid in reshaping microbial eco-interrelations and functions

Electricity-stimulated anaerobic system (ESAS) has shown great potential for halogenated organic pollutants removal. Exogenous redox mediators can improve electron transfer efficiency to enhance pollutants removal in ESAS. In this study, humic acid (HA), a low-cost electron mediator, was added into ESAS to enhance the simultaneous reductive debromination and mineralization of 4-bromophenol (4-BP). Results showed that the highest 4-BP removal efficiency at 48 h was 95.43 % with HA dosage of 30 mg/L at - 700 mV, which was 34.67 % higher than that without HA. The addition of HA decreased the requirement for electron donors and enriched Petrimonas and Rhodococcus for humus respiratory. HA addition regulated microbial interactions, and enhanced species cooperation between Petrimonas and dehalogenation species (Thauera and Desulfovibrio), phenol degradation-related species (Rhodococcus) as well as fermentative species (Desulfobulbus). Functional genes related to 4-BP degradation (dhaA/hemE/xylC/chnB/dmpN) and electron transfer (etfB/nuoA/qor/ccoN/coxA) were increased in abundance by HA addition. The enhanced microbial functions, as well as species cooperation and facilitation, all contributed to the improved 4-BP biodegradation in HA-added ESAS. This study provided a deep insight into microbial mechanism driven by HA and offered a promising strategy for improving halogenated organic pollutants removal from wastewater.

Industrial bioelectrochemistry for waste valorization: State of the art and challenges

Bioelectrochemistry has gained importance in recent years for some of its applications on waste valorization, such as wastewater treatment and carbon dioxide conversion, among others. The aim of this review is to provide an updated overview of the applications of bioelectrochemical systems (BESs) for waste valorization in the industry, identifying current limitations and future perspectives of this technology. BESs are classified according to biorefinery concepts into three different categories: (i) waste to power, (ii) waste to fuel and (iii) waste to chemicals. The main issues related to the scalability of bioelectrochemical systems are discussed, such as electrode construction, the addition of redox mediators and the design parameters of the cells. Among the existing BESs, microbial fuel cells (MFCs) and microbial electrolysis cells (MECs) stand out as the more advanced technologies in terms of implementation and R&D investment. However, there has been little transfer of such achievements to enzymatic electrochemical systems. It is necessary that enzymatic systems learn from the knowledge reached with MFC and MEC to accelerate their development to achieve competitiveness in the short term.

Highly selective butanol production by manipulating electron flow via cathodic electro-fermentation

Butanol production by solventogenic Clostridia shows great potential to combat the energy crisis, but is still challenged by low butanol selectivity and high downstream cost. In this study, a novel cathodic electro-fermentation (CEF) system mediated by methyl viologen (MV) was proposed and sequentially optimized to obtain highly selective butanol production. Under the optimal conditions (-0.60 V cathode potential, 0.50 mM MV, 30 g/L glucose), 7.17 ± 0.55 g/L butanol production were achieved with the yield of 0.32 ± 0.02 g/g. With the supplement of 4 g/L butyric acid as co-substrate, butanol production further improved to 13.14 ± 1.14 g/L with butanol yield and selectivity as high as 0.43 ± 0.01 g/g and 90.44 ± 1.66%, respectively. The polarized electrode enabled the unbalanced fermentation towards butanol formation and MV further inhibited hydrogen production, both of which contributed to the high-level butanol production and selectivity. The MV-mediated CEF system is a promising approach for cost-effective bio-butanol production.

Moving towards the enhancement of extracellular electron transfer in electrogens

Electrogens are very common in nature and becoming a contemporary theme for research as they can be exploited for extracellular electron transfer. Extracellular electron transfer is the key mechanism behind bioelectricity generation and bioremediation of pollutants via microbes. Extracellular electron transfer mechanisms for electrogens other than Shewanella and Geobacter are less explored. An efficient extracellular electron transfer system is crucial for the sustainable future of bioelectrochemical systems. At present, the poor extracellular electron transfer efficiency remains a decisive factor in limiting the development of efficient bioelectrochemical systems. In this review article, the EET mechanisms in different electrogens (bacteria and yeast) have been focused. Apart from the well-known electron transfer mechanisms of Shewanella oneidensis and Geobacter metallireducens, a brief introduction of the EET pathway in Rhodopseudomonas palustris TIE-1, Sideroxydans lithotrophicus ES-1, Thermincola potens JR, Lysinibacillus varians GY32, Carboxydothermus ferrireducens, Enterococcus faecalis and Saccharomyces cerevisiae have been included. In addition to this, the article discusses the several approaches to anode modification and genetic engineering that may be used in order to increase the rate of extracellular electron transfer. In the side lines, this review includes the engagement of the electrogens for different applications followed by the future perspective of efficient extracellular electron transfer.

Synergistic effect of extracellular polymeric substances and carbon layer on electron utilization of Fe@C during anaerobic treatment of refractory wastewater

Nano zero-valent iron (NZVI) has been widely used to improve refractory wastewater treatment. However, the rapid dissolution of NZVI causes a waste of resources and an unstable bioaugmentation. Herein, to verify the essential role of slow release of NZVI on biological systems, a core-shell structured Fe@C composite was developed to demonstrate the long-term feasibility of Fe@C for enhancing azo dye biodegradation in comparison to a mixture of NZVI and carbon powder (Fe+C). The 150 days of long-term reactor operation showed that, although both Fe@C and Fe+C enhanced azo dye degradation, the former achieved a better performance than the latter. The strengthening effect of Fe@C was also more durable and stable than Fe+C. It may be due to the fact that the carbon layer of Fe@C could interact with extracellular polymeric substances (EPS) through physical adsorption and chemical bonding to form a stable buffer to regulate NZVI dissolution. The buffer layer could not only regulate the attack of H⁺ on NZVI to reduce its dissolution rate but also complex released Fe²⁺ and neutralize OH^- to alleviate the passivation layer formed on the NZVI surface. Moreover, microbial community analysis indicated that both Fe@C and Fe+C increased the abundance of fermentative bacteria (e.g., Bacteroidetes_vadinHA17, Propionicicella) and methanogens (e.g., Methanobacterium), but only Fe@C promoted the growth of azo dye degraders (e.g., Clostridium, Geobacter). Metatranscriptomic analysis further revealed that only Fe@C could substantially stimulate the expression of azoreductase and redox mediator (e.g., riboflavin, ubiquinone) biosynthesis involved in the extracellular degradation of azo dye. This work provides novel insights into the bioaugmentation of Fe@C for refractory wastewater treatment.

Microbial electrosynthesis: carbonaceous electrode materials for CO2 conversion

Microbial electrosynthesis (MES) is a sustainable approach to address greenhouse gas (GHG) emissions using anthropogenic carbon dioxide (CO₂) as a building block to create clean fuels and highly valuable chemicals. The efficiency of MES-based CO₂ conversion is closely related to the performance of electrode material and, in particular, the cathode for which carbonaceous materials are frequently used. Compared to expensive metal electrodes, carbonaceous materials are biocompatible with a high specific surface area, wide range of possible morphologies, and excellent chemical stability, and their use can maximize the growth of bacteria and enhance electron transfer rates. Examples include MES cathodes based on carbon nanotubes, graphene, graphene oxide, graphite, graphite felt, graphitic carbon nitride (g-C₃N₄), activated carbon, carbon felt, carbon dots, carbon fibers, carbon brushes, carbon cloth, reticulated vitreous carbon foam, MXenes, and biochar. Herein, we review the state-of-the-art MES, including thermodynamic and kinetic processes that underpin MES-based CO₂ conversion, as well as the impact of reactor type and configuration, selection of biocompatible electrolytes, product selectivity, and the use of novel methods for stimulating biomass accumulation. Specific emphasis is placed on carbonaceous electrode materials, their 3D bioprinting and surface features, and the use of waste-derived carbon or biochar as an outstanding material for further improving the environmental conditions of CO₂ conversion using carbon-hungry microbes and as a step toward the circular economy. MES would be an outstanding technique to develop rocket fuels and bioderived products using CO₂ in the atmosphere for the Mars mission.

Multivariate landscapes constructed by Bayesian estimation over five hundred microbial electrochemical time profiles

Data science emerges as a promising approach for studying and optimizing complex multivariable phenomena, such as the interaction between microorganisms and electrodes. However, there have been limited reports on a bioelectrochemical system that can produce a reliable database until date. Herein, we developed a high-throughput platform with low deviation to apply two-dimensional (2D) Bayesian estimation for electrode potential and redox-active additive concentration to optimize microbial current production (I c ). A 96-channel potentiostat represents <10% SD for maximum I c . 576 time-I c profiles were obtained in 120 different electrolyte and potentiostatic conditions with two model electrogenic bacteria, Shewanella and Geobacter. Acquisition functions showed the highest performance per concentration for riboflavin over a wide potential range in Shewanella. The underlying mechanism was validated by electrochemical analysis with mutant strains lacking outer-membrane redox enzymes. We anticipate that the combination of data science and high-throughput electrochemistry will greatly accelerate a breakthrough for bioelectrochemical technologies.

Inward-to-outward assembly of amine-functionalized carbon dots and polydopamine to Shewanella oneidensis MR-1 for high-efficiency, microbial-photoreduction of Cr(VI)

A novel photosensitized living biohybrid was fabricated by inward-to-outward assembly of amine-functionalized carbon dots (NCDs) and polydopamine (PDA) to Shewanella oneidensis MR-1 and applied for high-efficiency, microbial-photoreduction of Cr(VI). Within a 72 h test period, biohybrids achieved a pronounced catalytic reduction capacity (100%) for 100 mg/L Cr(VI) under visible illumination, greatly surpassing the poor capacity (only 2.5%) displayed by the wild strain under dark conditions. Modular configurations of NCDs and PDA afforded biohybrids with a large electron flux by harvesting extracellular photoelectrons generated from illuminated NCDs and increasing reducing equivalents released from an enlarged intracellular NADH/NAD⁺ pool. Further, increased production of intracellular c-type cytochromes and extracellular flavins resulting from the modular configuration enhanced the biohybrid electron transport ability. The enhancement of electron transport was also attributed to more conductive conduits at NCDs-PDA junction interfaces. Moreover, because NCDs are highly reductive, the enhanced Cr(VI) reduction was also attributed to direct reduction by the NCDs and the direct Cr(VI) reduction by sterile NCDs-assembled biohybrid was up to 20% in the dark. Overall, a highly efficient strategy for removal/transformation of Cr(VI) by using NCD-assembled photosensitized biohybrids was proposed in this work, which greatly exceeded the performance of Cr(VI)-remediation strategies based on conventional microbial technologies.

Coupled process of in-situ sludge fermentation and riboflavin-mediated nitrogen removal for low carbon wastewater treatment

Volatile fatty acid recovery from waste activated sludge (WAS) was highly suggested to supplement carbon source for nitrogen removal. However, it was not easy to separate them from the metabolites under the ex-situ fermentation. In this study, in-situ WAS fermentation combined in the denitrification system was established to treat low carbon wastewater (COD/TN = 4), and riboflavin was employed as a redox mediator. This coupled process could simultaneously enhance the WAS fermentation and nitrogen removal, and riboflavin could significantly enrich the fermentative bacteria (Firmicutes phylum), denitrifying bacteria (Denitratisoma genus) and related functional genes (narGHJI, napABC, nirKS, nosZ, norBC), generating more available carbon sources for efficient nitrogen removal. This resulted in the effluent TN (<15 mg/L) satisfying the required discharge standard in China. This study provided new insights into the efficient nitrogen removal from low carbon wastewater, realizing the carbon-neutral operation of new concept wastewater treatment plant in China.

Quinone-mediated Sb removal from sulfate-rich wastewater by anaerobic granular sludge: Performance and mechanisms

Antimony (Sb) is a typical pollutant in sulfate-rich industrial wastewater. This study investigated the Sb removal efficiency in sulfate-rich water by anaerobic granular sludge (AnGS) and the stimulation of amended anthraquinone-2-sulfonate (AQS). Results showed that 89.0% of 5 mg/L Sb(V) was reduced by AnGS within 24 h, along with the observed first accumulation (up to 552.2 μg/L) and then precipitation of Sb(Ш); coexistence of 2 g/L sulfate inhibited the removal of Sb(V) by 71.4% within 24 h, along with gradual accumulation of Sb(Ш) by 3257.4 μg/L, indicating the potential competition of adsorption sites and electron donors between Sb(V) and sulfate. Amendment of 31 mg/L AQS successfully removed the inhibition from sulfate, contributing to 99.5% Sb(V) removal and minimum Sb(Ш) accumulation in Sb(V) + sulfate+AQS group. Further test results suggested that Sb(V) removal by AnGS was mainly through dissimilatory reduction instead of bio-sorption, while Sb(Ш) removal mainly relied on instant bio-sorption by AnGS followed by precipitation in the form of Sb₂O₃ and Sb₂S₃. Extracellular Polymeric Substances (EPS) characterization showed that AQS promoted the accumulation of Sb(V) and Sb(Ш) in EPS. High-throughput sequencing analysis showed the enrichment of sulfate-reducing bacteria (SRB) in Sb(V) + sulfate group and suppressed SRB growth in Sb(V) + sulfate+AQS group.

Weak electrostimulation enhanced the microbial transformation of ibuprofen and naproxen

Ibuprofen (IBU) and naproxen (NPX) are commonly used non-steroidal anti-inflammatory drugs (NSAIDs) with high-risk quotients and are frequently detected in various aquatic environments. A weak electrostimulated biofilm not only had improved removal efficiencies to IBU and NPX, but also transformed different enantiomers with comparable efficiency and without configuration inversion. IBU was transformed mainly by oxidation (hydroxyl-IBU, carboxy-IBU), while NPX was mainly detoxified. The microbial analysis of IBU and NPX biofilm showed that the shared core consortia (> 1%) contained typical electro-active bacteria (Geobacter, Desulfovibrio), fermenters (Petrimonas, Acetobacterium) and potential degraders (Pandoraea, Nocardiaceae), which exhibited synergistic interactions by exchanging the additional electrons, H⁺, coenzyme NAD(H) or NAD(P) (H) and energy. The fungal community has a significant correlation to those core bacteria and they may also play transformation roles with their diverse enzymes. Plenty of nonspecific oxidoreductase, decarboxylase, hydrolase, cytochrome P450, and other enzymes relating to xenobiotic degradation were high-abundance encoded by the core consortia and could potentially participate in IBU and NPX biotransformation. This study offers new insights into the functional microbes and enzymes working on complex NSAIDs biotransformation and provided a feasible strategy for the enhanced removal of NSAIDs (especially IBU and NPX).

An enhanced excess sludge fermentation process by anthraquinone-2-sulfonate as electron shuttles for the biorefinery of zero-carbon hydrogen

Excess sludge (ES) largely produced in municipal wastewater treatment plants is known as a waste biomass and the traditional treatment processes such as landfill and incineration are considered as unsustainable due to the negative environmental impact. Fermentation process of ES for the biorefinery of zero-carbon hydrogen has attracted an increasing interesting and was extensively researched in the last decades. However, the technology is far from commercial application due to the insufficient effectivity. In the present study, anthraquinone-2-sulfonate (AQS) as electron shuttles was introduced into the fermentation process of ES for mediating the composition and activity of bacterial community to get an enhanced biohydrogen production. Inoculated with the same anaerobic activated sludge of 1.12 gVSS/L, a series of batch anaerobic fermentation systems with various dosage of AQS were conducted at the same ES load of 2.75 gVSS/L, initial pH 6.5 and 35 °C. The results showed that the fermentation process was remarkably enhanced by the introduction of 100 mg/L AQS, accompanying the lag phase was shortened to 1.35 h from 7.62. The obtained biohydrogen yield and the specific biohydrogen production rate were also remarkably enhanced to 24.9 mL/gVSS and 0.3 mL/(gVSS·h), respectively. Illumina Miseq sequencing showed that Longilinea and Guggenheimella as the dominant genera had been enriched from 9.2% to 0-12.0% and 4.7%, respectively, in the presence of 100 mg/L AQS. Function predicted analysis suggested that the presence of AQS had increased the abundance of genes involved in the transport and metabolism of carbohydrate, amino acid and energy production. Further redundancy analysis (RDA) revealed that the enhanced hydrogen production was highly positively correlated with the enrichment of genera such as Longilinea and Guggenheimella. The research work presents a novel potential biorefinery of ES for the effective production of zero-carbon hydrogen.

Modular configurations of living biomaterials incorporating nano-based artificial mediators and synthetic biology to improve bioelectrocatalytic performance: A review

Currently, the industrial application of bioelectrochemical systems (BESs) that are incubated with natural electrochemically active microbes (EABs) is limited due to inefficient extracellular electron transfer (EET) by natural EABs. Notably, recent studies have identified several novel living biomaterials comprising highly efficient electron transfer systems allowing unparalleled proficiency of energy conversion. Introduction of these biomaterials into BESs could fundamentally increase their utilization for a wide range of applications. This review provides a comprehensive assessment of recent advancements in the design of living biomaterials that can be exploited to enhance bioelectrocatalytic performance. Further, modular configurations of abiotic and biotic components promise a powerful enhancement through integration of nano-based artificial mediators and synthetic biology. Herein, recent advancements in BESs are synthesized and assessed, including heterojunctions between conductive nanomaterials and EABs, in-situ hybrid self-assembly of EABs and nano-sized semiconductors, cytoprotection in biohybrids, synthetic biological modifications of EABs and electroactive biofilms. Since living biomaterials comprise a broad range of disciplines, such as molecular biology, electrochemistry and material sciences, full integration of technological advances applied in an interdisciplinary framework will greatly enhance/advance the utility and novelty of BESs. Overall, emerging fundamental knowledge concerning living biomaterials provides a powerful opportunity to markedly boost EET efficiency and facilitate the industrial application of BESs to meet global sustainability challenges/goals.

Engineering Shewanella carassii, a newly isolated exoelectrogen from activated sludge, to enhance methyl orange degradation and bioelectricity harvest

Electroactive microorganisms (EAMs) play important roles in biogeochemical redox processes and have been of great interest in the fields of energy recovery, waste treatment, and environmental remediation. However, the currently identified EAMs are difficult to be widely used in complex and diverse environments, due to the existence of poor electron transfer capability, weak environmental adaptability, and difficulty with engineering modifications, etc. Therefore, rapid and efficient screening of high performance EAMs from environments is an effective strategy to facilitate applications of microbial fuel cells (MFCs). In this study, to achieve efficient degradation of methyl orange (MO) by MFC and electricity harvest, a more efficient exoelectrogen Shewanella carassii-D₅ that belongs to Shewanella spp. was first isolated from activated sludge by WO₃ nanocluster probe technique. Physiological properties experiments confirmed that S. carassii-D₅ is a Gram-negative strain with rounded colonies and smooth, slightly reddish surface, which could survive in media containing lactate at 30 °C. Moreover, we found that S. carassii-D₅ exhibited remarkable MO degradation ability, which could degrade 66% of MO within 72 h, 1.7 times higher than that of Shewanella oneidensis MR-1. Electrochemical measurements showed that MFCs inoculated with S. carassii-D₅ could generate a maximum power density of 704.6 mW/m², which was 5.6 times higher than that of S. oneidensis MR-1. Further investigation of the extracellular electron transfer (EET) mechanism found that S. carassii-D₅ strain had high level of c-type cytochromes and strong biofilm formation ability compared with S. oneidensis MR-1, thus facilitating direct EET. Therefore, to enhance indirect electron transfer and MO degradation capacity, a synthetic gene cluster ribADEHC encoding riboflavin synthesis pathway from Bacillus subtilis was heterologously expressed in S. carassii-D₅, increasing riboflavin yield from 1.9 to 9.0 mg/g DCW with 1286.3 mW/m² power density output in lactate fed-MFCs. Furthermore, results showed that the high EET rate endowed a faster degradation efficient of MO from 66% to 86% with a maximum power density of 192.3 mW/m², which was 1.3 and 1.6 times higher than that of S. carassii-D₅, respectively. Our research suggests that screening and engineering high-efficient EAMs from sludge is a feasible strategy in treating organic pollutants.

Cathodic biofilms - A prerequisite for microbial electrosynthesis

Cathodic biofilms have an important role in CO₂ bio-reduction to carboxylic acids and biofuels in microbial electrosynthesis (MES) cells. However, robust and resilient electroactive biofilms for an efficient CO₂ conversion are difficult to achieve. In this review, the fundamentals of cathodic biofilm formation, including energy conservation, electron transfer and development of catalytic biofilms, are presented. In addition, strategies for improving cathodic biofilm formation, such as the selection of electrode and carrier materials, cell design and operational conditions, are described. The knowledge gaps are individuated, and possible solutions are proposed to achieve stable and productive biofilms in MES cathodes.

Bioelectrochemical systems-based metal recovery: Resource, conservation and recycling of metallic industrial effluents

Metals represent a large proportion of industrial effluents, which due to their high hazardous nature and toxicity are responsible to create environmental pollution that can pose significant threat to the global flora and fauna. Strict ecological rules compromise sustainable recovery of metals from industrial effluents by replacing unsustainable and energy-consuming physical and chemical techniques. Innovative technologies based on the bioelectrochemical systems (BES) are a rapidly developing research field with proven encouraging outcomes for many industrial commodities, considering the worthy options for recovering metals from industrial effluents. BES technology platform has redox capabilities with small energy-intensive processes. The positive stigma of BES in metals recovery is addressed in this review by demonstrating the significance of BES over the current physical and chemical techniques. The mechanisms of action of BES towards metal recovery have been postulated with the schematic representation. Operational limitations in BES-based metal recovery such as biocathode and metal toxicity are deeply discussed based on the available literature results. Eventually, a progressive inspection towards a BES-based metal recovery platform with possibilities of integration with other modern technologies is foreseen to meet the real-time challenges of viable industrial commercialization.

Activation of extracellular electron network in non-electroactive bacteria by Bombyx mori silk

Extracellular electron transfer material (EETM) has increasingly attracted attentions for the enhancing effect on multiple microbial reactions. Especially, EETM is known to be essential to activate the energy network in non-electroactive bacteria. It is motivated to find out an EETM which is natural-based, environmentally friendly, and easily produced at large-scale. In this study, Bombyx mori silk is found, for the first time, to function as an EETM by using an EETM-dependent pentachlorophenol (PCP) dechlorinating anaerobic microbial culture. Subsequently, by dividing fibroin fiber into different soluble/insoluble fractions and correlating their EET functions with their structural properties based on various spectroscopic analyses, the β-sheet configuration is suggested as an essential structure supporting the EET function of silk materials. The analyses also suggested the involvement of sulfur-containing amino acids in this function. The EET function is not degraded by boiling or acid/alkaline treatments and the material can be utilized multiple times, although it is susceptible to UV irradiation. Bombyx mori silk also enhance other microbial reactions, including Fe(III)OOH reduction, CO₂ reduction to acetate, and nitrogen fixation. This discovery provides a basis for developing biotechnology for environmental remediation, global warming reduction, and biofertilizer production using Bombyx mori silk and its wastes.

Stimulation of pyrolytic carbon materials as electron shuttles on the anaerobic transformation of recalcitrant organic pollutants: A review

Pyrolytic carbon materials (PCMs) with various surface functionalities are widely used as environmentally friendly and cost-efficient adsorbents for the removal of organic and inorganic pollutants. Recent studies have illustrated that PCMs as electron shuttles (ESs) could also show excellent performances in promoting the anaerobic transformation of recalcitrant organic pollutants (ROPs). Numerous studies have demonstrated the excellent electron-shuttle capability (ESC) of PCMs to stimulate the anaerobic reductive transformation of ROPs. However, there is a lack of consistent understanding of the mechanism of ESC formation in PCMs and the stimulation mechanism for ROPs anaerobic transformation. To gain a more comprehensive understanding of the latest developments in the study of PCMs as ESs for ROPs anaerobic transformation, this review summarizes the formation mechanism, influencing factors, and stimulation mechanisms of ESC. ESC benefits from redox functional groups (quinone and phenol groups), persistent free radicals (PFRs), redox-active metal ions, conductive graphene phase, and porous nature of their surface. The factors influencing ESC include the highest treatment temperature (HTT), feedstocks, modification methods, and environmental conditions, of which, the HTT is the key factor. PCMs promote the reductive transformation of ROPs under anaerobic conditions via abiotic and biotic pathways. Eventually, the prospects for the ROPs anaerobic transformation enhanced by PCMs are proposed.

Electrical selection for planktonic sludge microbial community function and assembly

Electrostimulated hydrolysis acidification (eHA) has been used as an efficient biological pre-treatment of refractory industrial wastewater. However, the effects of electrostimulation on the function and assembly of planktonic anaerobic sludge microbial communities are poorly understood. Using 16S rRNA gene and metagenomic sequencing, we investigated planktonic sludge microbial community structure, composition, function, assembly, and microbial interactions in response to electrostimulation. Compared with a conventional hydrolysis acidification (HA) reactor, the planktonic sludge microbial communities selected by electrostimulation promoted biotransformation of the azo dye Alizarin Yellow R. The taxonomic and functional structure and composition were significantly shifted upon electrostimulation with azo dyes degraders (e.g. Acinetobacter and Dechloromonas) and electroactive bacteria (e.g. Pseudomonas) being enriched. More microbial interactions between fermenters and decolorizing and electroactive bacteria, as well as fewer interactions between different fermenters evolved in the eHA microbial communities. Moreover, the decolorizing bacteria were linked to the higher abundance of genes encoding for azo- and nitro-reductases and redox mediator (e.g. ubiquinone) biosynthesis involved in the transformation of azo dye. Microbial community assembly was more driven by deterministic processes upon electrostimulation. This study offers new insights into the effects of electrostimulation on planktonic sludge microbial community function and assembly, and provides a promising strategy for the manipulation of anaerobic sludge microbiomes in HA engineering systems.

Engineering microbial metabolic energy homeostasis for improved bioproduction

Metabolic energy (ME) homeostasis is essential for the survival and proper functioning of microbial cell factories. However, it is often disrupted during bioproduction because of inefficient ME supply and excessive ME consumption. In this review, we propose strategies, including reinforcement of the capacity of ME-harvesting systems in autotrophic microorganisms; enhancement of the efficiency of ME-supplying pathways in heterotrophic microorganisms; and reduction of unessential ME consumption by microbial cells, to address these issues. This review highlights the potential of biotechnology in the engineering of microbial ME homeostasis and provides guidance for the higher efficient bioproduction of microbial cell factories.

A neutral red mediated electro-fermentation system of Clostridium beijerinckii for effective co-production of butanol and hydrogen

To enhance the co-production of butanol and hydrogen by the acetone-butanol-ethanol (ABE) fermentation of Clostridium beijerinckii, a novel cathodic electro-fermentation (CEF) system was constructed with neutral red (NR) as electron mediator. With the mediation of NR, production of butanol and hydrogen from glucose in the CEF system achieved 5.49 ± 0.28 g/L and 3.74 ± 0.16 L/L, 569.5% and 325.0% higher than that in the open circuit (OC) system, respectively. The butanol and hydrogen yield of 0.30 ± 0.02 g/g and 206.53 ± 8.20 mL/g was 172.7% and 71.4% higher than that in the OC system, respectively. The effective co-production of butanol and hydrogen in the NR-mediated CEF system was attributed to the cooperation of the introduced polarized electrode and the additional NR. With the control of the polarized electrode, a feasible ORP was available for the effective hydrogen production. And the additional NR had induced more carbon source and electrons to the synthesis of butanol.

Microbial fuel cells: a comprehensive review for beginners

Microbial fuel cells (MFCs) have shown immense potential as a one-stop solution for three major sustainability issues confronting the world today-energy security, global warming and wastewater management. MFCs represent a cross-disciplinary platform for research at the confluence of the natural and engineering sciences. The diversity of variables influencing performance of MFCs has garnered research interest across varied scientific disciplines since the beginning of this century. The increasing number of research publications has made it necessary to keep track of work being carried out by research groups across the globe and consolidate significant findings on a regular basis. Review articles are often the nodal points for beginners who are required to undertake an exploratory survey of literature to identify a suitable research problem. This 'review of reviews' is a ready-reckoner that directs readers to relevant reviews and research articles reporting significant developments in MFC research in the last two decades. The article also highlights the areas needing research attention which when addressed could take this technology a few more steps closer to practical implementation.

A cathodic electro-fermentation system for enhancing butyric acid production from rice straw with a mixed culture

Bio-electrochemical system (BES) emerges as a versatile approach to handling environmental problems with the harvest of sustainable energy and value-added chemicals. To enhance the butyric acid production from rice straw, microbial fuel cell (MFC) and cathodic electro-fermentation (CEF) systems were constructed in this study. Inoculated with the same mixed culture, fermentative butyric acid production efficiency of the two BESs were evaluated with/without neutral red (NR) as electron mediator, respectively. It was found that the butyric acid fermentation efficiency in the MFC system was inefficient. While, the CEF system presented an evident positive effect on butyric acid production. The production and specific yield of butyric acid in the CEF system reached 5.54 g/L and 0.41 g/g, higher than that in the open circuit (OC) system by 17.37% and 28.13%, respectively. Mass percentage of butyric acid in the produced total volatile fatty acids (VFAs) was also increased from 44.74% to 52.76%. The addition of NR had no positive effect on the butyric acid production, due to the low contribution of electric current to the end-products. With the cathode potential of -0.80 V (vs Ag/AgCl), relative abundance of the butyric acid fermenting bacteria (Clostridium cluster IV and cluster XIVa) in the microbial mixture was increased from 20.25% in the OC system to 33.61% in the CEF system. This research work not only presents a novel method for enhancing butyric acid production by rice straw fermentation, but also aids an understanding of the fermentation mechanism in CEF systems.

Anodic electro-fermentation: Empowering anaerobic production processes via anodic respiration

In nature as well as in industrial microbiology, all microorganisms need to achieve redox balance. Their redox state and energy conservation highly depend on the availability of a terminal electron acceptor, for example oxygen in aerobic production processes. Under anaerobic conditions in the absence of an electron acceptor, redox balance is achieved via the production of reduced carbon-compounds (fermentation). An alternative strategy to artificially stabilize microbial redox and energy state is the use of anodic electro-fermentation (AEF). This emerging biotechnology empowers respiration under anaerobic conditions using the anode of a bioelectrochemical system as an undepletable terminal electron acceptor. Electrochemical control of redox metabolism and energy conservation via AEF can steer the carbon metabolism towards a product of interest and avoid the need for continuous and cost-inefficient supply of oxygen as well as the production of mixed reduced by-products, as is the case in aerobic production and fermentation processes, respectively. The great challenge for AEF is to establish efficient extracellular electron transfer (EET) from the microbe to the anode and link it to central carbon metabolism to enhance the synthesis of a target product. This article reviews the advantages and challenges of AEF, EET mechanisms, microbial energy gain, and discusses the rational choice of substrate-product couple as well as the choice of microbial catalyst. Besides, it discusses the potential of the industrial model-organism Bacillus subtilis as a promising candidate for AEF, which has not been yet considered for such an application. This prospective review contributes to a better understanding of how industrial microbiology can benefit from AEF and analyses key-factors required to successfully implement AEF processes. Overall, this work aims to advance the young research field especially by critically revisiting the fundamental aspects of AEF.

Rational design of artificial redox-mediating systems toward upgrading photobioelectrocatalysis

Photobioelectrocatalysis has recently attracted particular research interest owing to the possibility to achieve sunlight-driven biosynthesis, biosensing, power generation, and other niche applications. However, physiological incompatibilities between biohybrid components lead to poor electrical contact at the biotic-biotic and biotic-abiotic interfaces. Establishing an electrochemical communication between these different interfaces, particularly the biocatalyst-electrode interface, is critical for the performance of the photobioelectrocatalytic system. While different artificial redox mediating approaches spanning across interdisciplinary research fields have been developed in order to electrically wire biohybrid components during bioelectrocatalysis, a systematic understanding on physicochemical modulation of artificial redox mediators is further required. Herein, we review and discuss the use of diffusible redox mediators and redox polymer-based approaches in artificial redox-mediating systems, with a focus on photobioelectrocatalysis. The future possibilities of artificial redox mediator system designs are also discussed within the purview of present needs and existing research breadth.

Evaluation of dissolved and immobilized redox mediators on dark fermentation: Driving to hydrogen or solventogenic pathway

In this work, lawsone (LQ) and anthraquinone 2-sulphonate (AQS) (dissolved and covalently immobilized on activated carbon) were evaluated as redox mediators during the dark fermentation of glucose by a pretreated anaerobic sludge. Findings revealed that the use of dissolved LQ increased H₂ production (10%), and dissolved AQS improved H₂ production rate (11.4%). Furthermore, the total production of liquid byproducts (acetate, butyrate, ethanol, and butanol) was enhanced using dissolved (17%) and immobilized (36%) redox mediators. The established redox standard potentials of LQ and AQS suggested a possible interaction through electron transfer in cytochromes complexes for hydrogen production and the Bcd/EtfAB complex for volatile fatty acid formation.

New applications of quinone redox mediators: Modifying nature-derived materials for anaerobic biotransformation process

Due to their wide-distribution, high-biocompatibility and low-cost, nature-derived quinone redox mediators (NDQRM) have shown great potential in bioremediation through mediating electron transfers between microorganisms and between microorganisms and contaminants in anaerobic biotransformation processes. It is obvious that their performance in bioremediation was limited by the availability of quinone-based groups in NDQRM. A sustainable solution is to enhance the electron transfer capacity and retention capacity by the modification of NDQRM. Therefore, this review comprehensively summarized the modification techniques of NDQRM according to their multiple roles in anaerobic biotransformation systems. In addition, their potential applications in greenhouse gas mitigation, contaminant degradation in anaerobic digestion, contaminant bioelectrochemical remediation and energy recovery were discussed. And the problems that need to be addressed in the future were pointed out. The obtained knowledge would promote the exploration of novel NDQRM, and provide suggestions for the design of anaerobic consortia in biotransformation systems.

3D matrixed DNA self-nanocatalyzer as electrochemical sensitizers for ultrasensitive investigation of DNA 5-methylcytosine

DNA methylation plays an important role in a variety of human diseases. Thus, accurately analyze 5-methylcytosine in different DNA segments is of great significance. Herein, we proposed a novel 3D matrixed DNA self-nanocatalyzer via gold nanoparticles (AuNPs) supporting DNA self-hybridization with hemin as biomimetic enzyme and methylene blue (MB) as electrochemical mediator, which was employed as an efficient electrochemical sensitizer for the ultrasensitive bioassay of DNA 5-methylcytosine. Meanwhile, the AuNPs, graphitic carbon nitride (g-C₃N₄) and reduced graphene oxide (rGO) was prepared as AuNPs/g-C₃N₄@rGO nanocomposites to coat on the electrode surface to immobilize the capture hairpin DNA (CH). In the presence of target DNA with 5-methylcytosine, the target DNA could hybridize with CH via the hyperstable triple-helix formation. Based on the specific biorecognition between biotin and streptavidin and immune recognition between anti-5-methylcytosine antibodies and 5-methylcytosine sites on the target DNA, the 3D matrixed DNA self-nanocatalyzer could be captured onto the electrode surface to generate an amplified electrochemical signal related to the concentration of 5-methylcytosine. Under the optimal conditions, the proposed strategy performed a linear range from 10^-17 M to 10^-8 M with a detection limit of 8.6 aM. Remarkably, this strategy could be expanded easily to various biomarkers, including protein, DNA, phosphorylation and glycosylation, providing a promising strategy for clinical diagnosis and mechanism investigation of various diseases.

Cadmium sulfide nanoparticles-assisted intimate coupling of microbial and photoelectrochemical processes: Mechanisms and environmental applications

Intimate coupling of microbial extracellular electron transfer (EET) and photoelectrochemical processes is an emerging research area with great potential to circumvent many disadvantages associated with traditional techniques that depend on independent microbial or photocatalysis treatment. Microbial EET processes involve microorganism oxidation of extracellular electron donors for respiration and synchronous reduction of extracellular electron acceptors to form an integrated respiratory chain. Coupled microbial EET-photoelectrochemical technologies greatly improve energy conversion efficiency providing both economic and environmental benefits. Among substitutes for semiconductor photocatalysts, cadmium sulfide nanoparticles (CdS NPs) possess several attractive properties. Specifically, CdS NPs have suitable electrical conductivity, large specific surface area, visible light-driven photocatalysis capability and robust biocompatibility, enabling them to promote hybrid microbial-photoelectrochemical processes. This review highlights recent advances in intimately coupled CdS NPs-microbial extracellular electron transfer systems and examines the mechanistic pathways involved in photoelectrochemical transformations. Finally, the prospects for emerging applications utilizing hybrid CdS NPs-based microbial-photoelectrochemical technologies are assessed. As such, this review provides a rigorous fundamental analysis of electron transport dynamics for hybrid CdS NPs-microbial photoelectrochemical processes and explores the applicability of engineered CdS NPs-biohybrids for future applications, such as in environmental remediation and clean-energy production.

Enhancing methane oxidation in a bioelectrochemical membrane reactor using a soluble electron mediator

BACKGROUND

Bioelectrochemical methane oxidation catalysed by anaerobic methanotrophic archaea (ANME) is constrained by limited methane bioavailability as well as by slow kinetics of extracellular electron transfer (EET) of ANME. In this study, we tested a combination of two strategies to improve the performance of methane-driven bioelectrochemical systems that includes (1) the use of hollow fibre membranes (HFMs) for efficient methane delivery to the ANME organisms and (2) the amendment of ferricyanide, an effective soluble redox mediator, to the liquid medium to enable electrochemical bridging between the ANME organisms and the anode, as well as to promote EET kinetics of ANME.

RESULTS

The combined use of HFMs and the soluble mediator increased the performance of ANME-based bioelectrochemical methane oxidation, enabling the delivery of up to 196 mA m^-2, thereby outperforming the control system by 244 times when HFMs were pressurized at 1.6 bar.

CONCLUSIONS

Improving methane delivery and EET are critical to enhance the performance of bioelectrochemical methane oxidation. This work demonstrates that by process engineering optimization, energy recovery from methane through its direct oxidation at relevant rates is feasible.

Exploring community evolutionary characteristics of microbial populations with supplementation of Camellia green tea extracts in microbial fuel cells

This first-attempt study deciphered combined characteristics of species evolution and bioelectricity generation of microbial community in microbial fuel cells (MFCs) supplemented with Camellia green tea (GT) extracts for biomass energy extraction. Prior studies indicated that polyphenols-rich extracts as effective redox mediators (RMs) could exhibit significant electrochemical activities to enhance power generation in MFCs. However, the supplementation of Camellia GT extract obtained at room temperature with significant redox capabilities into MFCs unexpectedly exhibited obvious inhibitory effect towards power generation. This systematic study indicated that the presence of antimicrobial components (especially catechins) in GT extract might significantly alter the distribution of microbial community, in particular a decrease of microbial diversity and evenness. For practical applications to different microbial systems, pre-screening criteria of selecting biocompatible RMs should not only consider their promising redox capabilities (abiotic), but also possible inhibitory potency (biotic) to receptor microbes. Although Camellia tea extract was well-characterized as GRAS energy drink, some contents (e.g., catechins) may still express inhibition towards organisms and further assessment upon biotoxicity may be inevitably required for practice.

Polyphenolic compounds as electron shuttles for sustainable energy utilization

For renewable and sustainable bioenergy utilization with cost-effectiveness, electron-shuttles (ESs) (or redox mediators (RMs)) act as electrochemical "catalysts" to enhance rates of redox reactions, catalytically accelerating electron transport efficiency for abiotic and biotic electrochemical reactions. ESs are popularly used in cellular respiratory systems, metabolisms in organisms, and widely applied to support global lives. Apparently, they are applicable to increase power-generating capabilities for energy utilization and/or fuel storage (i.e., dye-sensitized solar cell, batteries, and microbial fuel cells (MFCs)). This first-attempt review specifically deciphers the chemical structure association with characteristics of ESs, and discloses redox-mediating potentials of polyphenolics-abundant ESs via MFC modules. Moreover, to effectively convert electron-shuttling capabilities from non-sustainable antioxidant activities, environmental conditions to induce electrochemical mediation apparently play critical roles of great significance for bioenergy stimulation. For example, pH levels would significantly affect electrochemical potentials to be exhibited (e.g., alkaline pHs are electrochemically favorable for expression of such electron-shuttling characteristics). Regarding chemical structure effect, chemicals with ortho- and para-dihydroxyl substituents-bearing aromatics own convertible characteristics of non-renewable antioxidants and electrochemically catalytic ESs; however, ES capabilities of meta-dihydroxyl substituents can be evidently repressed due to lack of resonance effect in the structure for intermediate radical(s) during redox reaction. Moreover, this review provides conclusive remarks to elucidate the promising feasibility to identify whether such characteristics are non-renewable antioxidants or reversible ESs from natural polyphenols via cyclic voltammetry and MFC evaluation. Evidently, considering sustainable development, such electrochemically convertible polyphenolic species in plant extracts can be reversibly expressed for bioenergy-stimulating capabilities in MFCs under electrochemically favorable conditions.

Biofilm systems as tools in biotechnological production

The literature provides more and more examples of research projects that develop novel production processes based on microorganisms organized in the form of biofilms. Biofilms are aggregates of microorganisms that are attached to interfaces. These viscoelastic aggregates of cells are held together and are embedded in a matrix consisting of multiple carbohydrate polymers as well as proteins. Biofilms are characterized by a very high cell density and by a natural retentostat behavior. Both factors can contribute to high productivities and a facilitated separation of the desired end-product from the catalytic biomass. Within the biofilm matrix, stable gradients of substrates and products form, which can lead to a differentiation and adaptation of the microorganisms' physiology to the specific process conditions. Moreover, growth in a biofilm state is often accompanied by a higher resistance and resilience towards toxic or growth inhibiting substances and factors. In this short review, we summarize how biofilms can be studied and what most promising niches for their application can be. Moreover, we highlight future research directions that will accelerate the advent of productive biofilms in biology-based production processes.

Biotransformation of 4-nitrophenol by co-immobilized Geobacter sulfurreducens and anthraquinone-2-sulfonate in barium alginate beads

Geobacter sulfurreducens and anthraquinone-2-sulfonate (AQS) were used suspended and immobilized in barium alginate during the biotransformation of 4-nitrophenol (4-NP). The assays were conducted at different concentrations of 4-NP (50-400 mg/L) and AQS, either in suspended (0-400 μM) or immobilized form (0 or 760 μM), and under different pH values (5-9). G. sulfurreducens showed low capacity to reduce 4-NP in absence of AQS, especially at the highest concentrations of the contaminant. AQS improved the reduction rates from 0.0086 h^-1, without AQS, to 0.149 h^-1 at 400 μM AQS, which represent an increment of 17.3-fold. The co-immobilization of AQS and G. sulfurreducens in barium alginate beads (AQS_i-G_i) increased the reduction rates up to 4.8- and 7.2-fold, compared to incubations with G. sulfurreducens in suspended and immobilized form, but in absence of AQS. AQS_i-G_i provides to G. sulfurreducens a barrier against the possibly inhibiting effects of 4-NP.