Novel molecular hybrids of cinnamic acids and guanylhydrazones as potential antitubercular agents

Investigation of the antimycobacterial activity of African medicinal plants combined with chemometric analysis to identify potential leads

The emergence of drug-resistant Mycobacterium tuberculosis strains is a threat to global health necessitating the discovery of novel chemotherapeutic agents. Natural products drug discovery, which previously led to the discovery of rifamycins, is a valuable approach in this endeavor. Against this backdrop, we set out to investigate the in vitro antimycobacterial properties of medicinal plants from Ghana and South Africa, evaluating 36 extracts and their 252 corresponding solid phase extraction (SPE) generated fractions primarily against the non-pathogenic Mycobacterium smegmatis and Mycobacterium aurum species. The most potent fraction was further evaluated in vitro against infectious M. tuberculosis strain. Crinum asiaticum (bulb) (Amaryllidaceae) emerged as the most potent plant species with specific fractions showing exceptional, near equipotent activity against the non-pathogenic Mycobacterium species (0.39 µg/ml ≤ MIC ≤ 25 µg/ml) with one fraction being moderately active (MIC = 32.6 µg/ml) against M. tuberculosis. Metabolomic analysis led to the identification of eight compounds predicted to be active against M. smegmatis and M. aurum. In conclusion, from our comprehensive study, we generated data which provided an insight into the antimycobacterial properties of Ghanaian and South African plants. Future work will be focused on the isolation and evaluation of the compounds predicted to be active.

Quercetin: A Potential Polydynamic Drug

The study of natural products as potential drug leads has gained tremendous research interest. Quercetin is one of those natural products. It belongs to the family of flavonoids and, more specifically, flavonols. This review summarizes the beneficial pharmaceutical effects of quercetin, such as its anti-cancer, anti-inflammatory, and antimicrobial properties, which are some of the quercetin effects described in this review. Nevertheless, quercetin shows poor bioavailability and low solubility. For this reason, its encapsulation in macromolecules increases its bioavailability and therefore pharmaceutical efficiency. In this review, a brief description of the different forms of encapsulation of quercetin are described, and new ones are proposed. The beneficial effects of applying new pharmaceutical forms of nanotechnology are outlined.

Synthetic Cinnamides and Cinnamates: Antimicrobial Activity, Mechanism of Action, and In Silico Study

The severity of infectious diseases associated with the resistance of microorganisms to drugs highlights the importance of investigating bioactive compounds with antimicrobial potential. Therefore, nineteen synthetic cinnamides and cinnamates having a cinnamoyl nucleus were prepared and submitted for the evaluation of antimicrobial activity against pathogenic fungi and bacteria in this study. To determine the minimum inhibitory concentration (MIC) of the compounds, possible mechanisms of antifungal action, and synergistic effects, microdilution testing in broth was used. The structures of the synthesized products were characterized with FTIR spectroscopy, ¹ H-NMR, ¹³ C-NMR, and HRMS. Derivative 6 presented the best antifungal profile, suggesting that the presence of the butyl substituent potentiates its biological response (MIC = 626.62 μM), followed by compound 4 (672.83 μM) and compound 3 (726.36 μM). All three compounds were fungicidal, with MFC/MIC ≤ 4. For mechanism of action, compounds 4 and 6 directly interacted with the ergosterol present in the fungal plasmatic membrane and with the cell wall. Compound 18 presented the best antibacterial profile (MIC = 458.15 μM), followed by compound 9 (550.96 μM) and compound 6 (626.62 μM), which suggested that the presence of an isopropyl group is important for antibacterial activity. The compounds were bactericidal, with MBC/MIC ≤ 4. Association tests were performed using the Checkerboard method to evaluate potential synergistic effects with nystatin (fungi) and amoxicillin (bacteria). Derivatives 6 and 18 presented additive effects. Molecular docking simulations suggested that the most likely targets of compound 6 in C. albicans were caHOS2 and caRPD3, while the most likely target of compound 18 in S. aureus was saFABH. Our results suggest that these compounds could be used as prototypes to obtain new antimicrobial drugs.

Tapping into the antitubercular potential of 2,5-dimethylpyrroles: A structure-activity relationship interrogation

An exploration of the chemical space around a 2,5-dimethylpyrrole scaffold of antitubercular hit compound 1 has led to the identification of new derivatives active against Mycobacterium tuberculosis and multidrug-resistant clinical isolates. Analogues incorporating a cyclohexanemethyl group on the methyleneamine side chain at C3 of the pyrrole core, including 5n and 5q, exhibited potent inhibitory effects against the M. tuberculosis strains, substantiating the essentiality of the moiety to their antimycobacterial activity. In addition, selected derivatives showed promising cytotoxicity profiles against human pulmonary fibroblasts and/or murine macrophages, proved to be effective in inhibiting the growth of intracellular mycobacteria, and elicited either bactericidal effects, or bacteriostatic activity comparable to 1. Computational studies revealed that the new compounds bind to the putative target, MmpL3, in a manner similar to that of known inhibitors BM212 and SQ109.

Antimicrobial drugs bearing guanidine moieties: A review

Compounds incorporating guanidine moieties constitute a versatile class of biologically interesting molecules with a wide array of applications. As such, guanidines have been exploited as privileged structural motifs in designing novel drugs for the treatment of various infectious and non-infectious diseases. In designing anti-infective agents, this moiety carries great appeal by virtue of attributes such as hydrogen-bonding capability and protonatability at physiological pH in the context of interaction with biological targets. This review provides an overview of recent advances in hit-to-lead development studies of antimicrobial guanidine-containing compounds with the aim to highlight their structural diversity and the pharmacological relevance of the moiety to drug activity, insofar as possible. In so doing, emphasis is put on chemical and microbiological properties of such compounds in relation to antibacterial, antifungal and antimalarial activities.

Exploring the potential of pyrazoline containing molecules as Aβ aggregation inhibitors in Alzheimer's disease

Objectives Alzheimer's disease (AD) is a chronic and progressive neurodegenerative disease in which one of the most prominent pathological features is accumulation of amyloid (Aβ) plaques. This occurs due to the process of aggregation from monomeric to polymeric forms of Aβ peptide and thus represents one of the attractive targets to treat AD. Methods After initial evaluation of a set of molecules containing N-acetylpyrazoline moiety flanked by aromatic rings on both sides as Aβ aggregation inhibitors, the most potent molecules were further investigated for mechanistic insights. These were carried out by employing techniques such as circular dichroism (CD) spectroscopy, transmission electron microscopy (TEM), in vitro PAMPA-BBB (Blood-Brain Barrier) assay and cytotoxicity evaluation. Results Two molecules among the exploratory set displayed Aβ aggregation inhibition comparable to standard curcumin. Among the follow-up molecules, several molecules displayed more inhibition than curcumin. These molecules displayed good inhibitory activity even at lower concentrations. CD and TEM confirmed the mechanism of Aβ aggregation. These molecules were found to alleviate Aβ induced cytotoxicity. BBB penetration studies highlighted the potential of these molecules to reach central nervous system (CNS). Conclusions Thus, several promising Aβ-aggregation inhibitors were obtained as a result of this study.

Production of Antitubercular Depsipeptides via Biosynthetic Engineering of Cinnamoyl Units

Two new cyclodecapeptides, atratumycins B (1) and C (2), containing substituted cinnamoyl side chains were generated by converging elements of the atratumycin (3) and atrovimycin (4) biosynthetic pathways. The structures of 1 and 2 were determined on the basis of HRESIMS, 1D and 2D NMR data, and X-ray single-crystal diffraction studies. Atratumycin B (1) is active against autoluminescent Mycobacterium tuberculosis H37Rv, displaying a minimum inhibitory concentration of 3.1 μg/mL (2.3 μM).

Cinnamic Derivatives as Antitubercular Agents: Characterization by Quantitative Structure-Activity Relationship Studies

Tuberculosis, caused by Mycobacterium tuberculosis (Mtb), remains one of the top ten causes of death worldwide and the main cause of mortality from a single infectious agent. The upsurge of multi- and extensively-drug resistant tuberculosis cases calls for an urgent need to develop new and more effective antitubercular drugs. As the cinnamoyl scaffold is a privileged and important pharmacophore in medicinal chemistry, some studies were conducted to find novel cinnamic acid derivatives (CAD) potentially active against tuberculosis. In this context, we have engaged in the setting up of a quantitative structure–activity relationships (QSAR) strategy to: (i) derive through multiple linear regression analysis a statistically significant model to describe the antitubercular activity of CAD towards wild-type Mtb; and (ii) identify the most relevant properties with an impact on the antitubercular behavior of those derivatives. The best-found model involved only geometrical and electronic CAD related properties and was successfully challenged through strict internal and external validation procedures. The physicochemical information encoded by the identified descriptors can be used to propose specific structural modifications to design better CAD antitubercular compounds.

Primaquine derivatives: Modifications of the terminal amino group

Numerous modifications of the well-known antimalarial drug primaquine, both at the quinoline ring and at the primary amino group, have been reported, mostly to obtain antimalarial agents with improved bioavailability, reduced toxicity and/or prolonged activity. Modifications of the terminal amino group were made with the main idea to prevent the metabolic pathway leading to inactive and toxic carboxyprimaquine (follow-on strategy), but also to get compounds with different activity (repurposing strategy). The modifications undertaken until 2009 were included in a review published in the same year. The present review covers various classes of primaquine N-derivatives with diverse biological profiles, prepared in the last decade by our research group as well as the others. We have summarized the synthetic procedures applied for their preparation and discussed the main biological results. Several hits for the development of novel antiplasmodial, anticancer, antimycobacterial and antibiofilm agents were identified.

Cinnamamide: An insight into the pharmacological advances and structure-activity relationships

The cinnamamide (cinnamic acid amide and cinnamide) is a privileged scaffold present widely in a number of natural products. The scaffold acts as a useful template for designing and arriving at newly drug-like molecules with potential pharmacological activity. An attempt has been made to review the extensive occurrence of cinnamamide scaffold in many lead compounds reported for treating various diseases, their binding interactions with the therapeutic targets as well as mechanism of action and their structure-activity relationships. The discoveries of cinnamamide systems and some examples of unusual cinnamamides having an aromatic, aliphatic, and heterocyclic or other rings condensed to the basic cinnamamide structure also have been extensively covered in this review.

Cinnamic acid derivatives in cosmetics: current use and future prospects

Cinnamic acid derivatives are widely used in cosmetics and possess various functions. This group of compounds includes both naturally occurring and synthetic substances. On the basis of the Cosmetic Ingredient Database (CosIng) and available literature, this review summarizes their functions in cosmetics, including their physicochemical and biological properties as well as reported adverse effects. A perfuming function is typical of many derivatives of cinnamaldehyde, cinnamyl alcohol, dihydrocinnamyl alcohol and cinnamic acid itself; these substances are commonly used in cosmetics all over the world. Some of them show allergic and photoallergic potential, resulting in restrictions in maximum concentrations and/or a requirement to indicate the presence of some substances in the list of ingredients when their concentrations exceed certain fixed values in a cosmetic product. Another important function of cinnamic acid derivatives in cosmetics is UV protection. Ester derivatives such as ethylhexyl methoxycinnamate (octinoxate), isoamyl p-methoxycinnamte (amiloxiate), octocrylene and cinoxate are used in cosmetics all over the world as UV filters. However, their maximum concentrations in cosmetic products are restricted due to their adverse effects, which include contact and a photocontact allergies, phototoxic contact dermatitis, contact dermatitis, estrogenic modulation and generation of reactive oxygen species. Other rarely utilized functions of cinnamic acid derivatives are as an antioxidant, in skin conditioning, hair conditioning, as a tonic and in antimicrobial activities. Moreover, some currently investigated natural and synthetic derivatives of cinnamic acid have shown skin lightening and anti-ageing properties. Some of them may become new cosmetic ingredients in the future. In particular, 4-hydroxycinnamic acid, which is currently indexed as a skin-conditioning cosmetics ingredient, has been widely tested in vitro and in vivo as a new drug candidate for the treatment of hyperpigmentation.

Dibenzofuran, dibenzothiophene and N-methyl carbazole tethered 2-aminothiazoles and their cinnamamides as potent inhibitors of Mycobacterium tuberculosis

Herein described the design, synthesis and antitubercular evaluation of novel series of dibenzofuran, dibenzothiophene and N-methyl carbazole tethered 2-aminothiazoles and their cinnamamide analogs. One pot condensation of N-methyl carbazole, dibenzofuran and dibenzothiophene methyl ketones with thiourea in the presence of Iodine and CuO gave respective 2-aminothiazoles 4-6 in very good yields. Aminothiazoles were further coupled with substituted cinnamic acids using acid-amine coupling conditions to give desired cinnamamide analogs 8a-e, 9a-e and 10a-e. All the newly synthesized compounds were fully characterized by their NMR and mass spectral analysis. In vitro screening of new derivatives against Mycobacterium tuberculosis H37Rv (Mtb) resulted 8c, 10d and 10e (MIC: 0.78 µg/mL) and 2-aminothiazoles 5 and 6 (MIC: 1.56 µg/mL) as potent compounds with lower cytotoxicity profile.

Effect of gene-gene and gene-environment interactions associated with antituberculosis drug-induced hepatotoxicity

OBJECTIVES

This study evaluated the association between environmental factors and genetic variations in enzymes that metabolize antituberculosis (anti-TB) drugs [arylamine N-acetyltransferase 2, cytochrome P450 2E1 (CYP2E1), glutathione S-transferase theta 1 (GSTT1), and glutathione S-transferase mu 1] with antituberculosis drug-induced hepatotoxicity (ATDH). We also investigated the potential gene-gene and gene-environment interactions as well as their association with ATDH development in a population of hospitalized TB patients from Buenos Aires.

PATIENTS AND METHODS

We investigated 364 TB patients who received anti-TB drugs. Physicians collected demographic and clinical data to identify environmental risk factors for ATDH development. Polymorphisms were detected using gene sequencing, PCR, and PCR-restriction fragment length polymorphisms. A binary logistic regression analysis was carried out to compare the results of TB patients with and without the development of hepatotoxicity. The multifactor dimensionality reduction method was used to examine genetic and environmental interactions in association with ATDH.

RESULTS

This study suggests that the slow acetylator profile [odds ratio (OR): 3.02; 95% confidence interval (CI): 1.82-5.00; P<0.001], genotypes carrying the c2 variant (OR: 2.16; 95% CI: 1.33-3.51; P=0.002) or the A4 variant of CYP2E1 (OR: 2.13; 95% CI: 1.06-4.29; P=0.050), and female sex (OR: 1.94; 95% CI: 1.20-3.14; P=0.006) were independent predictor variables for ATDH. Patients carrying the slow acetylator profile and the c2 variant showed an increased risk (OR: 7.068; 95% CI: 3.34-14.95; P<0.001). We also identified a synergic interaction (epistasis) between GSTT1 and CYP2E1 associated with an increased risk for ATDH. A meaningful gene-environment interaction was associated with an increased risk of ATDH [testing balance accuracy=0.675 (P=0.001) and cross-validation consistency=10/10].

CONCLUSION

ATDH is a severe and prevalent adverse drug reaction and leads to drug discontinuation in 11% of TB patients. Our study created a prediction model that properly classified the 67.5% of TB patients in their risk of developing ATDH. The considerable number of TB patients in our country supports the use of pharmacogenetic testing and a comprehensive clinical history to identify patients with a high risk of suffering hepatotoxicity.

Primaquine hybrids as promising antimycobacterial and antimalarial agents

Four series of primaquine (PQ) derivatives were screened for antitubercular and antiplasmodial activity: amides 1a-k, ureas 2a-s, semicarbazides 3a-c and bis-ureas 4a-u. Antimycobacterial activity of PQ derivatives against Mycobacterium tuberculosis (MTB), M. avium complex (MAC) and M. avium subsp. paratuberculosis (MAP) were evaluated in vitro and compared with PQ and the standard antitubercular drugs. In general, the PQ derivatives showed higher potency than the parent compound. Most of the compounds of series 1 and 2 showed high activity against MAP, comparable or even higher than the relevant drug ciprofloxacin, and weak or no activity against MTB and MAC. bis-Trifluoromethylated cinnamamide 1k showed low cytotoxicity and high activity against all three Mycobacterium species and their activities were comparable or slightly higher than those of the reference drugs. PQ urea derivatives with hydroxyl, halogen and trifluoromethyl substituents on benzene ring 2f-p exerted very strong antimycobacterial activity towards all tested mycobacteria, stronger than PQ and the relevant standard drug(s). Unfortunately, these compounds had relatively high cytotoxicity, except bromo 2l and trifluoromethyl 2m, 2n derivatives. In general, meta-substituted derivatives were more active than analogues para-derivatives. Phenyl ureas were also more active than cycloalkyl or hydroxyalkyl ureas. Semicarbazide 3a showed similar activity as PQ, while the other two semicarbazides were inactive. Bis-urea derivatives 4 were generally less active than the urea derivatives sharing the same scaffold, differing only in the spacer type. Out of 21 evaluated bis-urea derivatives, only p-Cl/m-CF₃ phenyl derivative 4p, benzhydryl derivatives 4t and 4u and bis-PQ derivative 4s showed high activity, higher than all three reference drugs. After comparison of activity and cytotoxicity, urea 2m and bis-urea 4u could be considered as the most promising agents. Antimalarial potential of PQ derivatives in vitro against the liver stage of P. berghei was evaluated as well. 3-(4-Chlorophenyl)-1-[({4-[(6-methoxyquinolin-8-yl)amino]pentyl}carbamoyl)amino]urea (4l) was the most active compound (IC₅₀ = 42 nM; cytotoxicity/activity ratio >2000). Our results bring new insights into development of novel anti-TB and antimalarial compounds.

Mechanochemical Synthesis and Biological Evaluation of Novel Isoniazid Derivatives with Potent Antitubercular Activity

A series of isoniazid derivatives bearing a phenolic or heteroaromatic coupled frame were obtained by mechanochemical means. Their pH stability and their structural (conformer/isomer) analysis were checked. The activity of prepared derivatives against Mycobacterium tuberculosis cell growth was evaluated. Some compounds such as phenolic hydrazine 1a and almost all heteroaromatic ones, especially 2, 5 and 7, are more active than isoniazid, and their activity against some M. tuberculosis MDR clinical isolates was determined. Compounds 1a and 7 present a selectivity index >1400 evaluated on MRC5 human fibroblast cells. The mechanism of action of selected hydrazones was demonstrated to block mycolic acid synthesis due to InhA inhibition inside the mycobacterial cell.

Synthesis and biological evaluation of a new series of cinnamic acid amide derivatives as potent haemostatic agents containing a 2-aminothiazole substructure

Ten new cinnamic acid derivatives containing a 2-aminothiazole substructure were designed and synthesized. This series of compounds exhibited good thermostabilities as demonstrated by thermogravimetric analysis. In coagulation assays (prothrombin time, activated partial thromboplastin time and thrombin time) in vitro, most compounds demonstrated excellent activities to promote blood coagulation. Among the studied series, compounds N1, N4, N5 and W5 exhibited a significant coagulation activity. Further studies indicated that compound N5 (IC₅₀=1.87μmol/L) displayed the most suitable efficacy of promoting platelet aggregation than the clinically used haemostatic drug etamsylate (IC₅₀=46.22μmol/L). Furthermore, the relationship between the functional groups of the compounds and the corresponding blood coagulant activity was explored in this study.

Design, Synthesis and Biological Evaluation of Novel Primaquine-Cinnamic Acid Conjugates of the Amide and Acylsemicarbazide Type

In this paper design and synthesis of a scaffold comprising primaquine (PQ) motif and cinnamic acid derivatives (CADs) bound directly (compounds 3a-k) or via a spacer (compounds 7a-k) are reported. In the first series of compounds, PQ and various CADs were connected by amide bonds and in the second series by acylsemicarbazide functional groups built from the PQ amino group, CONHNH spacer and the carbonyl group originating from the CADs. PQ-CAD amides 3a-k were prepared by a simple one-step condensation reaction of PQ with a series of CAD chlorides (method A) or benzotriazolides 2 (method B). The synthesis of acylsemicarbazides 7a-k included activation of PQ with benzotriazole, preparation of PQ-semicarbazide 6 and its condensation with CAD chlorides 4. All synthesized PQ-CAD conjugates were evaluated for their anticancer, antiviral and antioxidative activities. Almost all compounds from series 3 were selective towards the MCF-7 cell line and active at micromolar concentrations. The o-fluoro derivative 3h showed high activity against HeLa, MCF-7 and in particular against the SW 620 cell line, while acylsemicarbazide 7f with a benzodioxole ring and 7c, 7g and especially 7j with methoxy-, chloro- or trifluoromethyl-substituents in the para position showed high selectivity and high inhibitory activity against MCF-7 cell line at micromolar (7c, 7f, 7g) and nanomolar (7j) levels. Acylsemicarbazide derivatives with trifluoromethyl group(s) 7i, 7j and 7k showed specific activity against human coronavirus (229E) at concentrations which did not alter the normal cell morphology. The same compounds exerted the most potent reducing activity in the DPPH test, together with 7d and 7g, while methoxy (compounds 7c-e), benzodioxole (7f), p-Cl (7g) and m-CF₃ (7i) acylsemicarbazides and amide 3f presented the highest LP inhibition (83%-89%). The dimethoxy derivative 7d was the most potent LOX inhibitor (IC50 = 10 μΜ). The performed biological tests gave evidence of acylsemicarbazide functional group as superior binding group in PQ-CAD conjugates.

Hybrid molecules: The privileged scaffolds for various pharmaceuticals

The practice of polypharmacology is not a new concept but the approaches which are being adopted for administering the two or more drugs together are varied from time to time. Taking two or more drugs simultaneously, co-formulation of two or more active agents in a single tablet and development of hybrid molecular entities capable to modulate multiple targets are the three popular approaches for multidrug therapy. The simultaneous use of more than one drug for the chemotherapy of a single disease demands a lot of patient compliance. Hence the present form of polypharmacology is gaining popularity in the form of hybrid molecules (multiple ligand approach). From the last 1-2 decades, the synthesis of hybrid molecules by the combination of different biologically relevant moieties has been under constant escalation along with their evaluation as diverse range of pharmacological agents and as potent drugs. This review is focused on the biological potential of hybrid molecules with particular mention of those exhibiting anti-fungal, anti-tuberculosis, anti-malarial, anti-inflammatory and anti-cancer activities. A comparison of the drug potency of the hybrid molecules with their individual counterparts is discussed for quantifying the significance of the concept of molecular hybridisation.

Dehydrozingerone Inspired Styryl Hydrazine Thiazole Hybrids as Promising Class of Antimycobacterial Agents

Series of styryl hydrazine thiazole hybrids inspired from dehydrozingerone (DZG) scaffold were designed and synthesized by molecular hybridization approach. In vitro antimycobacterial activity of synthesized compounds was evaluated against Mycobacterium tuberculosis H37Rv strain. Among the series, compound 6o exhibited significant activity (MIC = 1.5 μM; IC50 = 0.48 μM) along with bactericidal (MBC = 12 μM) and intracellular antimycobacterial activities (IC50 = <0.098 μM). Furthermore, 6o displayed prominent antimycobacterial activity under hypoxic (MIC = 46 μM) and normal oxygen (MIC = 0.28 μM) conditions along with antimycobacterial efficiency against isoniazid (MIC = 3.2 μM for INH-R1; 1.5 μM for INH-R2) and rifampicin (MIC = 2.2 μM for RIF-R1; 6.3 μM for RIF-R2) resistant strains of Mtb. Presence of electron donating groups on the phenyl ring of thiazole moiety had positive correlation for biological activity, suggesting the importance of molecular hybridization approach for the development of newer DZG clubbed hydrazine thiazole hybrids as potential antimycobacterial agents.

Design and Synthesis of a Focused Library of Diamino Triazines as Potential Mycobacterium tuberculosis DHFR Inhibitors

We report design of a series of 2,4-diamino triazines as Mycobacterium tuberculosis (Mtb) dihydrofolate reductase inhibitors. The synthesized compounds were evaluated against Mtb (H37Rv and Dormant stage H37Ra), their cytotoxicity was assessed (HepG2 and A549 cell lines), and selectivity toward Mtb was evaluated by testing against other bacterial strains. Some derivatives showed promising activity along with low cytotoxicity. The most potent compound in the whole cell assay (MIC 0.325 μM against H37Rv) showed selectivity in the enzyme assay and exhibited synergy with second line anti-TB agent p-amino salicylic acid. This study therefore provides promising molecules for further development as antituberculosis DHFR inhibitors.

Rational drug design, synthesis and biological evaluation of dihydrofolate reductase inhibitors as antituberculosis agents

Background: A series of 2,4-diamino-s-triazines was designed, with potential for activity against Mycobacterium tuberculosis (Mtb) dihydrofolate reductase enzyme, on the basis of virtual screening results and structure-based drug design. Results: The compounds were evaluated against Mtb (H37Rv) and their cytotoxicity was assessed using VERO cell lines. Of particular note, two compounds were found to have the most promising antituberculosis activity (6b minimum inhibitory concentration: 1.76 μM and 6i minimum inhibitory concentration: 1.57 μM) along with low cytotoxicity (CC50: >300 μM). The enzyme assay results of these two indicated significant inhibition of Mtb dihydrofolate reductase along with selectivity. Selected derivatives were tested against dormant tubercle bacilli in vivo and ex vivo indicating potential inhibition. Conclusion: This study provides promising antituberculosis dihydrofolate reductase inhibitors that can act as potential leads for further development.

Natural cinnamic acids, synthetic derivatives and hybrids with antimicrobial activity

Antimicrobial natural preparations involving cinnamon, storax and propolis have been long used topically for treating infections. Cinnamic acids and related molecules are partly responsible for the therapeutic effects observed in these preparations. Most of the cinnamic acids, their esters, amides, aldehydes and alcohols, show significant growth inhibition against one or several bacterial and fungal species. Of particular interest is the potent antitubercular activity observed for some of these cinnamic derivatives, which may be amenable as future drugs for treating tuberculosis. This review intends to summarize the literature data on the antimicrobial activity of the natural cinnamic acids and related derivatives. In addition, selected hybrids between cinnamic acids and biologically active scaffolds with antimicrobial activity were also included. A comprehensive literature search was performed collating the minimum inhibitory concentration (MIC) of each cinnamic acid or derivative against the reported microorganisms. The MIC data allows the relative comparison between series of molecules and the derivation of structure-activity relationships.

N'-[4-[(Substituted imino)methyl]benzylidene]-substituted benzohydrazides: synthesis, antimicrobial, antiviral, and anticancer evaluation, and QSAR studies

ABSTRACT

A variety of N'-[4-[(substituted imino)methyl]benzylidene]-substituted benzohydrazides have been synthesized and evaluated for antimicrobial and anticancer potential. Results from testing of antimicrobial activity indicated the most potent antimicrobial agents had pMIC am = 1.51. The synthesized compounds were bacteriostatic and fungistatic in action. Results from evaluation of antiviral activity indicated that none of the synthesized hydrazide derivatives inhibited viral replication at sub-toxic concentrations. Results from anti-HIV screening against HIV-2 strain ROD indicated that one compound was more potent (IC 50 ≥ 1 μg/cm3) than the standard drug nevirapine (IC 50 ≥ 4 μg/cm3) and another was equipotent (IC 50 ≥ 4 μg/cm3). The most effective anticancer agent against both HCT116 and MCF7 cancer cell lines had IC 50 = 19 and 18 μg/cm3, respectively. QSAR analysis indicated the importance of Wiener index (W) and energy of the lowest unoccupied molecular orbital (LUMO) in describing the antimicrobial activity of the synthesized compounds.

GRAPHICAL ABSTRACT

Design, synthesis, and molecular hybrids of caudatin and cinnamic acids as novel anti-hepatitis B virus agents

Forty-six conjugated derivatives of caudatin with substituted cinnamic acids were synthesized, and their anti-hepatitis B virus (HBV) activity was evaluated in HepG 2.2.15 cells. Most of the derivatives exhibited potent anti-HBV activity, especially inhibiting the HBV DNA replication with the IC(50) values from 2.44 to 22.89 μΜ. Compound 18 showed significant activity against the secretion of HBsAg, HBeAg, and HBV DNA replication with IC(50) values of 5.52, 5.52, 2.44 μΜ, respectively, and had good safety (LD(50) > 1250 mg/kg) according to the acute toxicity study. Preliminary mechanism investigation suggested that compound 18 exerted antivirus effects via interfering HBV X promoter and enhancer I to influence HBV transcriptions.

Microwave-assisted synthesis of small molecules targeting the infectious diseases tuberculosis, HIV/AIDS, malaria and hepatitis C

The unique properties of microwave in situ heating offer unparalleled opportunities for medicinal chemists to speed up lead optimisation processes in early drug discovery. The technology is ideal for small-scale discovery chemistry because it allows full reaction control, short reaction times, high safety and rapid feedback. To illustrate these advantages, we herein describe applications and approaches in the synthesis of small molecules to combat four of the most prevalent infectious diseases; tuberculosis, HIV/AIDS, malaria and hepatitis C, using dedicated microwave instrumentation.