Protein precipitation and denaturation by dimethyl sulfoxide

The contrasting roles of co-solvents in protein formulations and food products

Protein aggregation is a major hurdle in developing biopharmaceuticals, in particular protein formulation area, but plays a pivotal role in food products. Co-solvents are used to suppress protein aggregation in pharmaceutical proteins. On the contrary, aggregation is encouraged in the process of food product making. Thus, it is expected that co-solvents play a contrasting role in biopharmaceutical formulation and food products. Here, we show several examples that utilize co-solvents, e.g., salting-out salts, sugars, polyols and divalent cations in promoting protein-protein interactions. The mechanisms of co-solvent effects on protein aggregation and solubility have been studied on aqueous protein solution and applied to develop pharmaceutical formulation based on the acquired scientific knowledge. On the contrary, co-solvents have been used in food industries based on empirical basis. Here, we will review the mechanisms of co-solvent effects on protein-protein interactions that can be applied to both pharmaceutical and food industries and hope to convey knowledge acquired through research on co-solvent interactions in aqueous protein solution and formulation to those involved in food science and provide those involved in protein solution research with the observations on aggregation behavior of food proteins.

Towards cost-effective drug discovery: Reusable immobilized enzymes for neurological disease research

Enzyme handling and utilization bears many challenges such as their limited stability, intolerance of organic solvents, high cost, or inability to reuse. Most of these limitations can be overcome by enzyme immobilization on the surface of solid support. In this work, the recombinant form of human cholinesterases and monoamine oxidases as important drug targets for neurological diseases were immobilized on the surface of magnetic non-porous microparticles by a non-covalent bond utilizing the interaction between a His-tag terminus on the recombinant enzymes and cobalt (Co2+) ions immobilized on the magnetic microparticles. This type of binding led to targeted enzyme orientation, which completely preserved the catalytic activity and allowed high reproducibility of immobilization. In comparison with free enzymes, the immobilized enzymes showed exceptional stability in time and the possibility of repeated use. Relevant Km, Vmax, and IC50 values using known inhibitors were obtained using particular immobilized enzymes. Such immobilized enzymes on magnetic particles could serve as an excellent tool for a sustainable approach in the early stage of drug discovery.

Model biological systems demonstrate the inducibility of pathways that strongly reduce cryoprotectant toxicity

Cryoprotectant toxicity is a limiting factor for the cryopreservation of many living systems. We were moved to address this problem by the potential of organ vitrification to relieve the severe shortage of viable donor organs available for human transplantation. The M22 vitrification solution is presently the only solution that has enabled the vitrification and subsequent transplantation with survival of large mammalian organs, but its toxicity remains an obstacle to organ stockpiling for transplantation. We therefore undertook a series of exploratory studies to identify potential pretreatment interventions that might reduce the toxic effects of M22. Hormesis, in which a living system becomes more resistant to toxic stress after prior subtoxic exposure to a related stress, was investigated as a potential remedy for M22 toxicity in yeast, in the nematode worm C. elegans, and in mouse kidney slices. In yeast, heat shock pretreatment increased survival by 18-fold after exposure to formamide and by over 9-fold after exposure to M22 at 30 °C; at 0 °C and with two-step addition, treatment with 90% M22 resulted in 100% yeast survival. In nematodes, surveying a panel of pretreatment interventions revealed 3 that conferred nearly total protection from acute whole-worm M22-induced damage. One of these protective pretreatments (exposure to hydrogen peroxide) was applied to mouse kidney slices in vitro and was found to strongly protect nuclear and plasma membrane integrity in both cortical and medullary renal cells exposed to 75-100% M22 at room temperature for 40 min. These studies demonstrate for the first time that endogenous cellular defenses, conserved from yeast to mammals, can be marshalled to substantially ameliorate the toxic effects of one of the most toxic single cryoprotectants and the toxicity of the most concentrated vitrification solution so far described for whole organs.

Dimethyl Sulfoxide (DMSO) as a Potential Source of Interference in Research Related to Sulfur Metabolism-A Preliminary Study

Dimethyl sulfoxide (DMSO), an organosulfur compound, is widely used as the gold standard solvent in biological research. It is used in cell culture experiments and as a component of formulations in in vivo studies. Unfortunately, parameters related to sulfur metabolism are often not taken into account when using DMSO. Therefore, in this work we aim to show that the addition of DMSO to the culture medium (even in amounts commonly considered acceptable) alters some parameters of sulfur metabolism. For this study, we used three cell lines: a commercially available Caco-2 line (HTB-37, ATCC) and two lines created as part of our early studies (likewise previously described in the literature) to investigate the anomalies of sulfur metabolism in mucopolysaccharidosis. As the negative effects of DMSO on the cell membrane are well known, additional experiments with the partial loading of DMSO into polymerosomes (poly(ethylene glycol) methyl ether-block-poly(lactide-co-glycolide), PEG-PLGA) were performed to eliminate these potentially disruptive effects. The results show that DMSO is a source of interference in studies related to sulfur metabolism and that there are not just simple effects that can be corrected in the final result by subtracting control values, since complex synergisms are also observed.

Modulation of bacterial membranes and cellular macromolecules by dimethyl sulfoxide: A dose-dependent study providing novel insights

Using Escherichia coli as a model, this manuscript delves into the intricate interactions between dimethyl sulfoxide (DMSO) and membranes, cellular macromolecules, and the effects on various aspects of bacterial physiology. Given DMSO's wide-ranging use as a solvent in microbiology, we investigate the impacts of both non-growth inhibitory (1.0 % and 2.5 % v/v) and slightly growth-inhibitory (5.0 % v/v) concentrations of DMSO. The results demonstrate that DMSO causes alterations in bacterial membrane potential, influences the electrochemical characteristics of the cell surface, and exerts substantial effects on the composition and structure of cellular biomolecules. Genome-wide gene expression data from DMSO-treated E. coli was used to further investigate and bolster the results. The findings of this study provide valuable insights into the complex relationship between DMSO and biological systems, with potential implications in drug delivery and cellular manipulation. However, it is essential to exercise caution when utilizing DMSO to enhance the solubility and delivery of bioactive compounds, as even at low concentrations, DMSO exerts non-inert effects on cellular macromolecules and processes.

Dimethyl sulfoxide as a gas phase charge-reducing agent for the determination of PEGylated proteins' intact mass

Determination of PEGylated proteins' intact mass by mass spectrometry is challenging due to the molecules' large size, excessive charges, and instrument limitations. Previous efforts have been reported. However, signal variability, ion coalescence, and a generally low degree of robustness have been observed. In this work, we have explored the capabilities of post-column infusion of dimethyl sulfoxide (DMSO) following reversed-phase liquid chromatography-mass spectrometry (RP-LCMS) to determine PEG-filgrastim' intact mass, and to characterize its PEG moiety. The method was optimized around reproducibility (six preparations, and three injection replicates) with an in-house prepared PEG-filgrastim standard. The method showed a mass accuracy of ≤1.2 Da. The average molecular weight (MWEO=483) was 40 147.9 Da. The number average molecular weight (Mn) and the weight average molecular weight (Mw) were observed to be 40 101.1 and 40 113.9 Da, respectively, both with an RSD of 0.03%. The molecular weight distribution of ethylene oxide (EO), the polydispersity index (PDI), was 1.0003 for all preparations with a minimum and maximum number of EO units of 448 ± 2 and 516 ± 2, respectively. The method was finally applied to commercially available Neulasta® lots where the Mn and Mw were 39 995.8 and 40 008.8 Da, respectively, both with an RSD of 0.1%. The minimum and maximum EO units across the lots were observed to be 444.5 ± 1.5 and 514 ± 3, respectively. The PDI for all Neulasta® lots was 1.0003. This study provides an insightful characterization of Neulasta® and describes a robust LC-MS methodology for the characterization of the PEGylated proteins.

Inter-coat protein loading of active ingredients into Tobacco mild green mosaic virus through partial dissociation and reassembly of the virion

Chemical pesticide delivery is a fundamental aspect of agriculture. However, the extensive use of pesticides severely endangers the ecosystem because they accumulate on crops, in soil, as well as in drinking and groundwater. New frontiers in nano-engineering have opened the door for precision agriculture. We introduced Tobacco mild green mosaic virus (TMGMV) as a viable delivery platform with a high aspect ratio and favorable soil mobility. In this work, we assess the use of TMGMV as a chemical nanocarrier for agriculturally relevant cargo. While plant viruses are usually portrayed as rigid/solid structures, these are "dynamic materials," and they "breathe" in solution in response to careful adjustment of pH or bathing media [e.g., addition of solvent such as dimethyl sulfoxide (DMSO)]. Through this process, coat proteins (CPs) partially dissociate leading to swelling of the nucleoprotein complexes-allowing for the infusion of active ingredients (AI), such as pesticides [e.g., fluopyram (FLP), clothianidin (CTD), rifampicin (RIF), and ivermectin (IVM)] into the macromolecular structure. We developed a "breathing" method that facilitates inter-coat protein cargo loading, resulting in up to  ~ 1000 AIs per virion. This is of significance since in the agricultural setting, there is a need to develop nanoparticle delivery strategies where the AI is not chemically altered, consequently avoiding the need for regulatory and registration processes of new compounds. This work highlights the potential of TMGMV as a pesticide nanocarrier in precision farming applications; the developed methods likely would be applicable to other protein-based nanoparticle systems.

Effects of dimethyl sulfoxide pretreatment on the bonding properties of fluorotic dentin of different severity: An in vitro study

STATEMENT OF PROBLEM

Bonding to fluorotic dentin is weaker than to sound dentin, but methods to improve bonding have not been well addressed.

PURPOSE

The purpose of this in vitro study was to investigate the effects of dimethyl sulfoxide (DMSO) pretreatment on the bond strength and resin-dentin surface of fluorotic dentin of different severity.

MATERIAL AND METHODS

Phosphoric acid-etched dentin specimens exhibiting mild fluorosis (ML-F), moderate fluorosis (MD-F), and severe fluorosis (SE-F) were randomly bonded with Single Bond 2 (SB2) pretreated with 50% DMSO (experimental groups) or deionized water (control groups). The bonded teeth were sectioned for microshear bond strength (μSBS) testing immediately or after aging, for micromorphology observation of the bonding interface under a scanning electron microscope, and for resin tags and microleakage evaluation under a confocal laser scanning microscope. The degree of conversion of the adhesive resin was calculated by Fourier transform infrared spectroscopy. According to varying bonding steps, the mineralized dentin powders of ML-F, MD-F, and SE-F were randomly divided into 4 subgroups (blank, PA, PA+SB2, and PA+DMSO+SB2) and incubated in artificial saliva to examine the level of enzymatic degradation product of type I collagen. Data were analyzed by using ANOVA and the Tukey test (α=.05).

RESULTS

Dental fluorosis and thermocycling had negative effects on μSBS (P<.001), while DMSO pretreatment preserved or even improved μSBS (P<.001). DMSO had no influence on the degree of conversion (P=.618). Significant effects were found for bonding steps (P<.001), but not that of dental fluorosis (P=.131) on the enzymatic degradation product of type I collagen. Images showed sparser and more expanded collagen fibril meshwork, deeper resin penetration, and less microleakage in the experimental groups.

CONCLUSIONS

DMSO pretreatment provided increased and durable dentin bonding to fluorotic dentin probably by dispersing collagen fibrils into a sparser network and inhibiting the degradation of type I collagen.

Using energy to go downhill-a genoprotective role for ATPase activity in DNA topoisomerase II

Type II topoisomerases effect topological changes in DNA by cutting a single duplex, passing a second duplex through the break, and resealing the broken strand in an ATP-coupled reaction cycle. Curiously, most type II topoisomerases (topos II, IV and VI) catalyze DNA transformations that are energetically favorable, such as the removal of superhelical strain; why ATP is required for such reactions is unknown. Here, using human topoisomerase IIβ (hTOP2β) as a model, we show that the ATPase domains of the enzyme are not required for DNA strand passage, but that their loss elevates the enzyme's propensity for DNA damage. The unstructured C-terminal domains (CTDs) of hTOP2β strongly potentiate strand passage activity in ATPase-less enzymes, as do cleavage-prone mutations that confer hypersensitivity to the chemotherapeutic agent etoposide. The presence of either the CTD or the mutations lead ATPase-less enzymes to promote even greater levels of DNA cleavage in vitro, as well as in vivo. By contrast, aberrant cleavage phenotypes of these topo II variants is significantly repressed when the ATPase domains are present. Our findings are consistent with the proposal that type II topoisomerases acquired ATPase function to maintain high levels of catalytic activity while minimizing inappropriate DNA damage.

Protein Cryoprotectant Ability of the Aqueous Zwitterionic Solution

Protein cryopreservation is important for the long-term storage of unstable proteins. Recently, we found that N-acetylglucosaminyltransferase-V (GnT-V) can be cryopreserved in a deep freezer without temperature control using a dilute binary aqueous solution of 3-(1-(2-(2-methoxyethoxy)ethyl)imidazol-3-io)butane-1-carboxylate (OE2imC3C) [10 wt %, mole fraction of solute (x) = 7.75 × 10-3], an artificial zwitterion. However, it is unclear which solvent properties are required in these media to preserve unstable proteins, such as GnT-V. In this study, we investigated the melting phenomena and solution structure of dilute binary aqueous OE2imC3C solutions [x = 0-2.96 × 10-2 (0-30 wt %)] using differential scanning calorimetry (DSC) and Raman and Fourier transform infrared (FTIR) spectroscopies combined with molecular dynamics (MD) simulation to compare the cryoprotectant ability of OE2imC3C with two general cryoprotectants (CPAs), glycerol and dimethyl sulfoxide. DSC results indicated that aqueous OE2imC3C solutions can be melted at lower temperatures with less energy than the control CPA solution, with increasing x, primarily due to OE2imC3C having a higher content of unfrozen water molecules. Moreover, Raman and FTIR results showed that the high content of unfrozen water molecules in aqueous OE2imC3C solutions was due to the hydration around the ionic parts (the COO- group and imidazolium ring) and the OCH2CH2O segment. In addition, the MD simulation results showed that there were fewer structured water molecules around the OCH2CH2O segment than the hydration water molecules around the ionic parts. These solvent properties suggest that dilute aqueous OE2imC3C solutions are effective in preventing freezing, even in a deep freezer. Therefore, this medium has the potential to act as a novel cryoprotectant for proteins in biotechnology and biomedical fields.

Protein-based Nanoparticles: From Drug Delivery to Imaging, Nanocatalysis and Protein Therapy

Proteins and enzymes are versatile biomaterials for a wide range of medical applications due to their high specificity for receptors and substrates, high degradability, low toxicity, and overall good biocompatibility. Protein nanoparticles are formed by the arrangement of several native or modified proteins into nanometer-sized assemblies. In this review, we will focus on artificial nanoparticle systems, where proteins are the main structural element and not just an encapsulated payload. While under natural conditions, only certain proteins form defined aggregates and nanoparticles, chemical modifications or a change in the physical environment can further extend the pool of available building blocks. This allows the assembly of many globular proteins and even enzymes. These advances in preparation methods led to the emergence of new generations of nanosystems that extend beyond transport vehicles to diverse applications, from multifunctional drug delivery to imaging, nanocatalysis and protein therapy.

Kinase-catalyzed Biotinylation with Inactivated Lysates for Discovery of Substrates (K-BILDS)

Protein phosphorylation is catalyzed by kinases to regulate a large variety of cellular activities, including growth and signal transduction. Methods to identify kinase substrates are crucial to fully understand phosphorylation-mediated cellular events and disease states. Here, we report a set of protocols to identify substrates of a target kinase using Kinase-catalyzed Biotinylation with Inactivated Lysates for Discovery of Substrates (K-BILDS). As described in these protocols, K-BILDS involves inactivation of endogenous kinases in lysates, followed by addition of an active exogenous kinase and the γ-phosphate-modified ATP analog ATP-biotin for kinase-catalyzed biotinylation of cellular substrates. Avidin enrichment isolates biotinylated substrates of the active kinase, which can be monitored by western blot. Substrates of the target kinase can also be discovered using mass spectrometry analysis. Key advantages of K-BILDS include compatibility with any lysate, tissue homogenate, or complex mixture of biological relevance and any active kinase of interest. K-BILDS is a versatile method for studying or discovering substrates of a kinase of interest to characterize biological pathways thoroughly. © 2023 Wiley Periodicals LLC. Basic Protocol 1: FSBA treatment of lysates to inactivate kinases Basic Protocol 2: Kinase-catalyzed Biotinylation with Inactivated Lysates for Discovery of Substrates (K-BILDS).

Substrate-enzyme interactions and catalytic mechanism in a novel family VI esterase with dibutyl phthalate-hydrolyzing activity

Microbial degradation has been confirmed as effective and environmentally friendly approach to remediate phthalates from the environment, and hydrolase is an effective element for contaminant degradation. In the present study, a novel dibutyl phthalate (DBP)-hydrolyzing carboxylesterase (named PS06828) from Pseudomonas sp. PS1 was heterogeneously expressed in E. coli, which was identified as a new member of the lipolytic family VI. Purified PS06828 could efficiently degrade DBP with a wide range of temperature (25-37 °C) and pH (6.5-9.0). Multi-spectroscopy methods combined with molecular docking were employed to study the interaction of PS06828 with DBP. Fluorescence and UV-visible absorption spectra revealed the simultaneous presence of static and dynamic component in the fluorescence quenching of PS06828 by DBP. Synchronous fluorescence and circular dichroism spectra showed inconspicuous alteration in micro-environmental polarity around amino acid residues but obvious increasing of α-helix and reducing of β-sheet and random coil in protein conformation. Based on the information on exact binding sites of DBP on PS06828 provided by molecular docking, the catalytic mechanism mediated by key residues (Ser113, Asp166, and His197) was proposed and subsequently confirmed by site-directed mutagenesis. The results can strengthen our mechanistic understanding of family VI esterase involved in hydrolysis of phthalic acid esters, and provide a solid foundation for further enzymatic modification.

Using energy to go downhill - a genoprotective role for ATPase activity in DNA topoisomerase II

Type II topoisomerases effect topological changes in DNA by cutting a single duplex, passing a second duplex through the break, and resealing the broken strand in an ATP-coupled reaction. Curiously, most type II topoisomerases (topos II, IV, and VI) catalyze DNA transformations that are energetically favorable, such as the removal of superhelical strain; why ATP is required for such reactions is unknown. Here, using human topoisomerase II β (hTOP2β) as a model, we show that the ATPase domains of the enzyme are not required for DNA strand passage, but that their loss leads to increased DNA nicking and double strand break formation by the enzyme. The unstructured C-terminal domains (CTDs) of hTOP2β strongly potentiate strand passage activity in the absence of the ATPase regions, as do cleavage-prone mutations that confer hypersensitivity to the chemotherapeutic agent etoposide. The presence of either the CTD or the mutations lead ATPase-less enzymes to promote even greater levels of DNA cleava in ge vitro , as well as in vivo . By contrast, the aberrant cleavage phenotypes of these topo II variants is significantly repressed when the ATPase domains are restored. Our findings are consistent with the proposal that type II topoisomerases acquired an ATPase function to maintain high levels of catalytic activity while minimizing inappropriate DNA damage.

Tracking Permeation of Dimethyl Sulfoxide (DMSO) in Mentha × piperita Shoot Tips Using Coherent Raman Microscopy

Cryopreservation has emerged as a low-maintenance, cost-effective solution for the long-term preservation of vegetatively propagated crops. Shoot tip cryopreservation often makes use of vitrification methods that employ highly concentrated mixtures of cryoprotecting agents; however, little is understood as to how these cryoprotecting agents protect cells and tissues from freezing. In this study, we use coherent anti-Stokes Raman scattering microscopy to directly visualize where dimethyl sulfoxide (DMSO) localizes within Mentha × piperita shoot tips. We find that DMSO fully penetrates the shoot tip tissue within 10 min of exposure. Variations in signal intensities across images suggest that DMSO may interact with cellular components, leading to its accumulation in specific regions.

Effect of osmolytes on the EcoRI endonuclease: Insights into hydration and protein dynamics from molecular dynamics simulations

Osmolytes play an important role in cellular physiology by modulating the properties of proteins, including their molecular specificity. EcoRI is a model restriction enzyme whose specificity to DNA is altered in the presence of osmolytes. Here, we investigate the effect of two different osmolytes, glycerol and DMSO, on the dynamics and hydration of the EcoRI enzyme using molecular dynamics simulations. Our results show that the osmolytes, alter the essential dynamics of EcoRI. Particularly, we observe that the dynamics of the arm region of EcoRI which is involved in DNA binding is significantly altered. In addition, conformational free energy analyses reveals that the osmolytes bring about a change in the landscape similar to that of EcoRI bound to cognate DNA. We further observe that the hydration of the enzyme for each of the osmolyte is different, indicating that the mechanism of action of each of these osmolytes could be different. Further analyses of interfacial water dynamics using rotational autocorrelation function reveals that while the protein surface contributes to a slower tumbling motion of water, osmolytes, additionally contribute to the slowing of the angular motion of the water molecules. Entropy analysis also corroborates with this finding. We also find that the slowed rotational motion of interfacial waters in the presence of osmolytes contributes to a slowed relaxation of the hydrogen bonds between the interfacial waters and the functionally important residues in the protein. Taken together, our results show that osmolytes alter the dynamics of the protein by altering the dynamics of water. This altered dynamics, mediated by the changes in the water dynamics and hydrogen bonds with functionally important residues, may contribute to the altered specificity of EcoRI in the presence of osmolytes.

Water-Soluble Ionic Metal-Organic Polyhedra as a Versatile Platform for Enzyme Bio-immobilization

Metal-organic polyhedra (MOPs) can act as elementary structural units for the design of modular porous materials; however, their association with biological systems remains greatly restricted by their typically low stabilities and solubilities in water. Herein, we describe the preparation of novel MOPs bearing either anionic or cationic groups and exhibiting a high affinity for proteins. Simple mixing of the protein bovine serum albumin (BSA) and ionic MOP aqueous solutions resulted in the spontaneous formation of MOP-protein assemblies, in a colloidal state or as solid precipitates depending on the initial mixing ratio. The versatility of the method was further illustrated using two enzymes, catalase and cytochrome c, with different sizes and isoelectric points (pI's) below and above 7. This mode of assembly led to the high retention of catalytic activity and enabled recyclability. Furthermore, the co-immobilization of cytochrome c with highly charged MOPs resulted in a substantial 44-fold increase of its catalytic activity.

Lignocellulosic residues from bioethanol production: a novel source of biopolymers for laccase immobilization

The full utilization of the main components in the lignocellulosic biomass is the major goal from a biorefinery point of view, giving not only environmental benefits but also making the process economically viable. In this sense the solid residue obtained in bioethanol production after steam explosion pretreatment, enzymatic hydrolysis, and fermentation of the lignocellulosic biomass, was studied for further valorization. Two different residues were analyzed, one generated by the production of cellulosic ethanol from an energy crop such as switchgrass (Panicum virgatum) and the other, from wood (Eucalyptus globulus). The chemical composition of these by-products showed that they were mainly composed of lignin with a total content range from 70 to 83% (w/w) and small amounts of cellulose and hemicellulose. The present work was focused on devising a new alternative for processing these materials, based on the ability of the ionic liquids (IL) to dissolve lignocellulosic biomass. The resulting mixture of biopolymers and IL constituted the raw material for developing new insoluble biocatalysts. Active hydrogels based on fungal laccase from Dichostereum sordulentum 1488 were attained. A multifactorial analysis of the main variables involved in the immobilization process enabled a more direct approach to improving hydrogel-bound activity. These hydrogels achieved a 97% reduction in the concentration of the estrogen ethinylestradiol, an emerging contaminant of particular concern due to its endocrine activity. The novel biocatalysts based on fungal laccase entrapped on a matrix made from a by-product of second-generation bioethanol production presents great potential for performing heterogeneous catalysis offering extra value to the ethanol biorefinery.

Ligand-induced conformational changes enable intersubunit communications in D-dopachrome tautomerase

D-Dopachrome tautomerase (D-DT; or MIF-2) is a multifunctional protein with immunomodulatory properties and a documented pathogenic role in inflammation and cancer that is associated with activation of the cell surface receptor CD74. Alongside D-DT, macrophage migration inhibitory factor (MIF) is also known to activate CD74, promoting pathogenesis. While the role of the MIF/CD74 axis has been extensively studied in various disease models, the late discovery of the D-DT/CD74 axis has led to a poor investigation into the D-DT-induced activation mechanism of CD74. A previous study has identified 4-(3-carboxyphenyl)-2,5-pyridinedicarboxylic acid (4-CPPC) as the first selective and reversible inhibitor of D-DT and reported its potency to block the D-DT-induced activation of CD74 in a cell-based model. In this study, we employ molecular dynamics simulations and nuclear magnetic resonance experiments to study 4-CPPC-induced changes to the dynamic profile of D-DT. We found that binding of the inhibitor remarkably promotes the conformational flexibility of C-terminal without impacting the structural stability of the biological assembly. Consequently, long-range intrasubunit (>11 Å) and intersubunit (>30 Å) communications are enabled between distal regions. Communication across the three subunits is accomplished via 4-CPPC, which serves as a communication bridge after Val113 is displaced from its hydrophobic pocket. This previously unrecognized structural property of D-DT is not shared with its human homolog, MIF, which exhibits an impressive C-terminal rigidity even in the presence of an inhibitor. Considering the previously reported role of MIF's C-terminal in the activation of CD74, our results break new ground for understanding the functionality of D-DT in health and disease.

Loop Dynamics and Conformational Flexibility in Dengue Serine Protease Activity: Noninvasive Perturbation by Solvent Exchange

Molecular mechanics play an important role in enzyme action and understanding the dynamics of loop motion is key for designing inhibitors of an enzyme, particularly targeting the allosteric sites. For the successful creation of new protease inhibitors targeting the dengue serine protease, our current investigation detailed the intricate structural dynamics of NS2B/NS3 dengue protease. This enzyme is one of the most essential enzymes in the life cycle of the dengue virus, which is responsible for the activation/processing of viral polyprotein, thus making it a potential target for drug discovery. We showed that the internal dynamics of two regions, fingers 1 and 2 (R24-G39 and L149-A164, respectively) adjacent to the active site triad of this protease, control the enzyme action. Each of these regions is composed of two antiparallel β-strands connected by β-turn/hairpin loops. The correlated bending and rocking motions in the two β-turns on either side of the active site were found to modulate the activity of the enzyme to a large extent. With increasing concentration of cosolvent dimethyl sulfoxide, correlated motions in the finger 2 region get diminished and bending of finger 1 increases, which are also reflected in the loss of enzyme activity. Decreasing temperature and mutations in neighboring nonsubstrate binding residues show similar effects on loop motion and enzyme kinetics. Therefore, in vitro noninvasive perturbation of these motions by the solvent exchange as well as cold stress in combination with in silico molecular dynamics simulations established the importance of the two β-turns in the functioning of dengue virus serotype 2 NS2B/NS3 serine protease.

Solvation role of dimethyl sulfoxide on the interaction with dentin bonding systems after 30 months

OBJECTIVES

To determine whether DMSO could serve as an effective pretreatment to improve the mechanical properties and minimize the degradation of the adhesive interface, through the degree of conversion (DC) and bond strength to dentin of different categories of dentin bonding systems (DBSs) after 30 months.

METHODS

DMSO (0, 0.5, 1, 2, 5, 10 vol%) were incorporated into four categories of DBSs: Adper Scotchbond Multipurpose (MP), Adper Single Bond 2 (SB), Clearfil SE Bond (CSE) and Adper Scotchbond Universal (SU). DC was evaluated by Fourier transform infrared spectroscopy (FTIR). For microtensile bond strength test (µTBS), 1 % DMSO were applied on dentin as pretreatment before DBSs. For SU, both strategies were tested. Specimens for µTBS were tested after 24 h, 6 and 30 months. DC and µTBS data were subjected to two-way ANOVA and Tukey test (α < 0.05).

RESULTS

Incorporating 5 %/10 % DMSO increased the DC of CSE. Controversially, when combined with SU, 2 % and 10 % DMSO jeopardized the DC. Regarding µTBS, 1 % DMSO pre-treatment increased the bond strength for MP, SB, SU-ER and SU-SE. After 30 months, MP, SU-ER and SU-SE showed a decrease compared to baseline but remained higher than the control.

CLINICAL SIGNIFICANCE

DMSO pretreatment may be a useful strategy to improve the bond interface over time. Its incorporation seems to favor the non-solvated systems regarding DC while it seems to show long-term benefits for bond strength using 1 % DMSO for MP and SU systems.

Biopolymer gels as components of protective medium for cryopreservation of spermatogonial stem cells

Biopolymer gels attract a lot of attention in a field of biothechnology due to their excellent compatibility and degradation. Their application is also promising for cryopreservation of spermatogonial stem cells (SSCs) which is so necessary to preserve the fertility of young patients. The aim of the study was to determine the effectiveness of biopolymer gels as a component of cryopreservation medium for SSCs of immature rats at the stage of exposure to cryoprotectants. It was found that 30-min exposure to cryopreservation media based on collagen or fibrin gel with an addition of 5% Me₂SO or 6% glycerol did not lead to significant changes in membrane integrity, cytochrome C content, metabolic, mitochondrial and antioxidant activities in SSCs compared to the control (Leibovitz-based cryomedium). But fibrin gel more than collagen reduced the toxic effects of Me₂SO and glycerol on SSCs increasing exposure time up to 45 min without significant changes in cell viability. The same cryoprotectants in Leibovitz-based media showed significant toxicity starting from the 15th minute of exposure. Necrosis was the main cause of cell death at this stage of cryopreservation in all experimental groups. The obtained results can be used to optimize SSC cryopreservation protocols for further cell autotransplantation for spermatogenesis initiation in boys who undergo gonadotoxic therapy in prepubertal age.

Bio-SAXS of single-stranded DNA-binding proteins: radiation protection by the compatible solute ectoine

Small-angle X-ray scattering (SAXS) can be used for structural determination of biological macromolecules and polymers in their native states (e.g. liquid phase). This means that the structural changes of (bio-)polymers, such as proteins and DNA, can be monitored in situ to understand their sensitivity to changes in chemical environments. In an attempt to improve the reliability of such experiments, the reduction of radiation damage occurring from exposure to X-rays is required. One such method, is to use scavenger molecules to protect macromolecules against radicals produced during radiation exposure, such as reactive oxygen species (ROS). In this study we investigate the feasibility of applying the compatible solute, osmolyte and radiation protector Ectoine (THP(B)), as a scavenger molecule during SAXS measurements of the single-stranded DNA-binding protein Gene-V Protein (G5P/GVP). In this case, we monitor the radiation induced changes of G5P during bio-SAXS measurments and the resulting microscopic energy-damage relation was determined from microdosimetric calculations by Monte-Carlo based particle scattering simulations with TOPAS/Geant4 and a custom target-model. This resulted in a median-lethal energy deposit of pure G5P at 4 mg mL^-1 of E_1/2 = 7 ± 5 eV, whereas a threefold increase of energy-deposit was needed under the presence of Ectoine to reach the same level of damage. This indicates that Ectoine increases the possible exposure time before radiation-damage to G5P is observed. Furthermore, the dominant type of damage shifted from aggregation in pure solutions towards a fragmentation for solutions containing Ectoine as a cosolute. These results are interpreted in terms of indirect radiation damage by reactive secondary species, as well as post-irradiation effects, related to preferential-exclusion of the cosolute from the protein surface. Hence, Ectoine is shown to provide a non-disturbing way to improve structure-determination of proteins via bio-SAXS in future studies.

Cosolvent Dimethyl Sulfoxide Influences Protein-Ligand Binding Kinetics via Solvent Viscosity Effects: Revealing the Success Rate of Complex Formation Following Diffusive Protein-Ligand Encounter

Protein-ligand-exchange kinetics determines the duration of biochemical signals and consequently plays an important role in drug design. Binding studies commonly require solubilization of designed ligands in solvents such as dimethyl sulfoxide (DMSO), resulting in residual amounts of DMSO following titration of solubilized ligands into aqueous protein samples. Therefore, it is critical to establish whether DMSO influences protein-ligand binding. Here, we address the general and indirect effect of DMSO on protein-ligand binding caused by solvent viscosity, which is strongly dependent on the relative concentrations of DMSO and water. As a model system, we studied the binding of a drug-like ligand to the carbohydrate recognition domain of galectin-3 in the presence of variable amounts of DMSO. We used isothermal titration calorimetry to characterize binding thermodynamics and ¹⁵N NMR relaxation to monitor kinetics. The binding enthalpy is not affected, but we observe a subtle trend of increasingly unfavorable entropy of binding, and consequently decreased affinity, with increasing DMSO concentration. The increasing concentration of DMSO results in a reduced association rate of binding, while the dissociation rate is less affected. The observed association rate is inversely proportional to the viscosity of the DMSO-water mixture, as expected from theory, but significantly reduced from the diffusion-controlled limit. By comparing the viscosity dependence of the observed association rate with that of the theoretical diffusion-controlled association rate, we estimate the success rate of productive complex formation following an initial encounter of proteins and ligands, showing that only one out of several hundred binding "attempts" are successful.

Laminar flow-based microfluidic systems for molecular interaction analysis-Part 1: Chip development, system operation and measurement setup

The recent advent of laminar flow-based microfluidic systems for molecular interaction analysis has enabled transformative new profiling of proteins in regards to their structure, disordering, complex formation and interactions in general. Based on the diffusive transport of molecules perpendicular to the direction of laminar flow in a microfluidic channel, systems of this type promise continuous-flow, high-throughput screening of complex, multi-molecule interactions, while remaining tolerant to heterogeneous mixtures. Using common microfluidic device processing, the technology provides unique opportunities, as well as device design and experimental challenges, for integrative sample handling approaches that can investigate biomolecular interaction events in complex samples with readily available laboratory equipment. In this first chapter of a two-part series, we introduce system design and experimental setup requirements for a typical laminar flow-based microfluidic system for molecular interaction analysis in the form of what we call the 'LaMInA system' (Laminar flow-based Molecular Interaction Analysis system). We provide microfluidic device development advice on choice of device material, device design, including impact of channel geometry on the signal acquisition, and on design limitations and possible post-fabrication treatments to redress these. Finally. we cover aspects of fluidic actuation, such as selecting, measuring and controlling the flow rate appropriately, and provide a guide to possible fluorescent labels for proteins, as well as options for the fluorescence detection hardware, all in the context of assisting the reader in developing their own laminar flow-based experimental setup for biomolecular interaction analysis.

Role of metagenomics in prospecting novel endoglucanases, accentuating functional metagenomics approach in second-generation biofuel production: a review

As the fossil fuel reserves are depleting rapidly, there is a need for alternate fuels to meet the day to day mounting energy demands. As fossil fuel started depleting, a quest for alternate forms of fuel was initiated and biofuel is one of its promising outcomes. First-generation biofuels are made from edible sources like vegetable oils, starch, and sugars. Second-generation biofuels (SGB) are derived from lignocellulosic crops and the third-generation involves algae for biofuel production. Technical challenges in the production of SGB are hampering its commercialization. Advanced molecular technologies like metagenomics can help in the discovery of novel lignocellulosic biomass-degrading enzymes for commercialization and industrial production of SGB. This review discusses the metagenomic outcomes to enlighten the importance of unexplored habitats for novel cellulolytic gene mining. It also emphasizes the potential of different metagenomic approaches to explore the uncultivable cellulose-degrading microbiome as well as cellulolytic enzymes associated with them. This review also includes effective pre-treatment technology and consolidated bioprocessing for efficient biofuel production.

Confinement dependence of protein-associated solvent dynamics around different classes of proteins, from the EPR spin probe perspective

Protein function is modulated by coupled solvent fluctuations, subject to the degree of confinement from the surroundings. To identify universal features of the external confinement effect, the temperature dependence of the dynamics of protein-associated solvent over 200-265 K for proteins representative of different classes and sizes is characterized by using the rotational correlation time (detection bandwidth, 10-10-10-7 s) of the electron paramagnetic resonance (EPR, X-band) spin probe, TEMPOL, which is restricted to regions vicinal to protein in frozen aqueous solution. Weak (protein surrounded by aqueous-dimethylsulfoxide cryosolvent mesodomain) and strong (no added crysolvent) conditions of ice boundary confinement are imposed. The panel of soluble proteins represents large and small oligomeric (ethanolamine ammonia-lyase, 488 kDa; streptavidin, 52.8 kDa) and monomeric (myoglobin, 16.7 kDa) globular proteins, an intrinsically disordered protein (IDP, β-casein, 24.0 kDa), an unstructured peptide (protamine, 4.38 kDa) and a small peptide with partial backbone order (amyloid-β residues 1-16, 1.96 kDa). Expanded and condensate structures of β-casein and protamine are resolved by the spin probe under weak and strong confinement, respectively. At each confinement condition, the soluble globular proteins display common T-dependences of rotational correlation times and normalized weights, for two mobility components, protein-associated domain, PAD, and surrounding mesodomain. Strong confinement induces a detectable PAD component and emulation of globular protein T-dependence by the amyloid-β peptide. Confinement uniformly impacts soluble globular protein PAD dynamics, and is therefore a generic control parameter for modulation of soluble globular protein function.

Long-acting injectable formulation technologies: Challenges and opportunities for the delivery of fragile molecules

INTRODUCTION

The development of long acting injectables (LAIs) for protein and peptide therapeutics has been a key challenge over the last 20 years. If these molecules offer advantages due to their high specificity and selectivity, their controlled release may confer several additional benefits in terms of extended half-life, local delivery, and patient compliance.

AREA COVERED

This manuscript aims to give an overview of peptide and protein based LAIs from an industrial perspective, describing both approved and promising technologies (with exceptions of protein engineering strategies and devices), their advantages and potential improvements to aid their access to the market.

EXPERT OPINION

Many LAIs have been developed for peptides, with formulations on the market for several decades. On the contrary, LAIs for proteins are still far from the market and issues related to manufacturing and sterilization of these products still need to be overcome. In situ forming depots (ISFDs), whose simple manufacturing conditions and easy administration procedures (without reconstitution) are strong advantages, appear as one of the most promising technologies for the delivery of these molecules. In this regard, the approval of ELIGARD® in the early 2000's (which still requires a complex reconstitution process), paved the way for the development of second-generation, ready-to-use ISFD technologies like BEPO® and FluidCrystal®.

Assessing protein digestibility in allergenicity risk assessment: A comparison of in silico and high throughput in vitro gastric digestion assays

The susceptibility of a novel food protein to digestion in the pepsin resistance test is widely used to inform the allergenicity risk assessment process. However, it does not model the variation in the intragastric environment found in vivo. Consequently a 96-well plate format in vitro gastric digestion protocol has been developed with a high and low pepsin activity test executed at pH 1.2, 2.5, 5.5 and 6.5. It was used to analyse seven allergens (from milk, egg, peach and peanut) and two non-allergens (cytochrome c and zein). Digestion was monitored using SDS-PAGE and densitometry. In silico predictions were not confirmed experimentally for most of the proteins studied. Proteins were ranked according to half-life and showed susceptibility to digestion was related to the stability of protein structure and protein solubility rather than allergenicity per se. Highly digestible proteins, such as β-casein and Ara h 1, generated abundant resistant fragments Mr > 3.5 kDa in the low pepsin activity test which could be immunologically significant within the context of allergenicity risk assessment for susceptible groups such as infants. The high- and low pepsin activity tests used in this study provided complementary data to support allergenicity risk assessment and used only 10 mg protein.

Methodological advances and strategies for high resolution structure determination of cellular protein aggregates

Aggregation of proteins is at the nexus of molecular processes crucial to aging, disease, and employing proteins for biotechnology and medical applications. There has been much recent progress in determining the structural features of protein aggregates that form in cells; yet, owing to prevalent heterogeneity in aggregation, many aspects remain obscure and often experimentally intractable to define. Here we review recent results of structural studies for cell-derived aggregates of normally globular proteins, with a focus on high resolution methods for their analysis and prediction. Complementary results obtained by solid-state NMR spectroscopy, Fourier transform infrared (FTIR) spectroscopy and microspectroscopy, cryo-electron microscopy, and amide hydrogen/deuterium exchange measured by NMR and mass spectrometry (MS), applied to bacterial inclusion bodies and disease inclusions, are uncovering novel information on in-cell aggregation patterns as well as great diversity in the structural features of useful and aberrant protein aggregates. Using these advances as a guide, this review aims to advise the reader on which combination of approaches may be the most appropriate to apply to their unique system.

Resolution and characterization of contributions of select protein and coupled solvent configurational fluctuations to radical rearrangement catalysis in coenzyme B12-dependent ethanolamine ammonia-lyase

Coenzyme B₁₂ (adenosylcobalamin) -dependent ethanolamine ammonia-lyase (EAL) is the signature enzyme in ethanolamine utilization metabolism associated with microbiome homeostasis and disease conditions in the human gut. The enzyme conducts a complex choreography of bond-making/bond-breaking steps that rearrange substrate to products through a radical mechanism, with themes common to other coenzyme B₁₂-dependent and radical enzymes. The methods presented are targeted to test the hypothesis that particular, select protein and coupled solvent configurational fluctuations contribute to enzyme function. The general approach is to correlate enzyme function with an introduced perturbation that alters the properties (for example, degree of concertedness, or collectiveness) of protein and coupled solvent dynamics. Methods for sample preparation and low-temperature kinetic measurements by using temperature-step reaction initiation and time-resolved, full-spectrum electron paramagnetic resonance spectroscopy are detailed. A framework for interpretation of results obtained in ensemble systems under conditions of statistical equilibrium within the reacting, globally unstable state is presented. The temperature-dependence of the first-order rate constants for decay of the cryotrapped paramagnetic substrate radical state in EAL, through the chemical step of radical rearrangement, displays a piecewise-continuous Arrhenius dependence from 203 to 295K, punctuated by a kinetic bifurcation over 219-220K. The results reveal the obligatory contribution of a class of select collective protein and coupled solvent fluctuations to the interconversion of two resolved, sequential configurational substates, on the decay time scale. The select class of collective fluctuations also contributes to the chemical step. The methods and analysis are generally applicable to other coenzyme B₁₂-dependent and related radical enzymes.

Resolution and characterization of confinement- and temperature-dependent dynamics in solvent phases that surround proteins in frozen aqueous solution by using spin-probe EPR spectroscopy

Spin probe electron paramagnetic resonance spectroscopy is applied to characterize the dynamics of concentric hydration and mesophase solvent domains that surround proteins within the ice boundary in frozen aqueous solutions. The solvent dynamics are tuned by variation of temperature (190-265K) and by the degree of ice boundary confinement, which is modulated by the volume of added cryosolvent (0-~50Å separation distance from protein surface). Goals are to: (1) characterize the protein-coupled solvent dynamics on correlation time scales of ~10^-10<τ<10^-7s, and spatial scales from protein surface to periphery of the surrounding solution, from the perspective of a free, small-molecule (~7Å diameter) probe, and (2) reveal properties of the solvent-protein coupling that can be correlated with protein functions, that are measureable under the same conditions. Rotational mobility of the nitroxide spin probe, TEMPOL, resolves and tracks two solvent components, the protein-associated domain (PAD; akin to hydration layer) and surrounding mesodomain, through their distinct temperature- and confinement-dependent values of τ and normalized weight. Detailed protocols are described for simulation of two-component nitroxide EPR spectra, which are categorized by line shape regime and guided by a library of template spectra and simulation parameters derived from two model soluble globular proteins. The order-disorder transition in the PAD, which is a universal feature of protein-coupled solvent dynamics, provides a well-defined, tunable property for elucidating mechanism in solvent-protein-function dynamical coupling. The low-temperature mesodomain system and EPR spin probe method are generally applicable to reveal solvent contributions to a broad range of macromolecule-mediated biological processes.

Low dose DMSO treatment induces oligomerization and accelerates aggregation of α-synuclein

Dimethyl sulfoxide (DMSO) is a highly utilized small molecule that serves many purposes in scientific research. DMSO offers unique polar, aprotic and amphiphilic features, which makes it an ideal solvent for a wide variety of both polar and nonpolar molecules. Furthermore, DMSO is often used as a cryoprotectant in cell-based research. However, recent reports suggest that DMSO, even at low concentration, might interfere with important cellular processes, and cause macromolecular changes to proteins where a shift from α-helical to β-sheet structure can be observed. To investigate how DMSO might influence current research, we assessed biochemical and cellular impacts of DMSO treatment on the structure of the aggregation-prone protein α-synuclein, which plays a central role in the etiology of Parkinson’s disease, and other brain-related disorders, collectively termed the synucleinopathies. Here, we found that addition of DMSO increased the particle-size of α-synuclein, and accelerated the formation of seeding-potent fibrils in a dose-dependent manner. These fibrils made in the presence of DMSO were indistinguishable from fibrils made in pure PBS, when assessed by proteolytic digestion, cytotoxic profile and their ability to seed cellular aggregation of α-synuclein. Moreover, as evident through binding to the MJFR-14-6-4-2 antibody, which preferentially recognizes aggregated forms of α-synuclein, and a bimolecular fluorescence complementation assay, cells exposed to DMSO experienced increased aggregation of α-synuclein. However, no observable α-synuclein abnormalities nor differences in neuronal survival were detected after oral DMSO-treatment in either C57BL/6- or α-synuclein transgenic F28 mice. In summary, we demonstrate that low concentrations of DMSO makes α-synuclein susceptible to undergo aggregation both in vitro and in cells. This may affect experimental outcomes when studying α-synuclein in the presence of DMSO, and should call for careful consideration when such experiments are planned.

Classification of protein solubilizing additives by fluorescence assay

Aromatic interaction plays a crucial role in controlling protein interaction by additives. Here we investigated the interaction of protein salting-in (solubilizing) additives with tryptophan (Trp), tyrosine (Tyr), indole, and proteins based on their fluorescence spectra. Five salting-in additives, i.e., arginine (Arg), urea, guanidine (Gdn), ethylene glycol (EG), and magnesium chloride (MgCl₂), showed different effects on the fluorescence properties of Trp and Tyr. Arg significantly reduced fluorescence intensity of Trp and Tyr, as was the case for glycine to a lesser extent. MgCl₂ and calcium chloride (CaCl₂) showed little effect on the aromatic fluorescence spectra. Gdn also showed little effect on the aromatic fluorescence spectra of Trp and Tyr even at high concentrations. EG increased the aromatic fluorescence intensity of Trp and Tyr with blue-shifted emission wavelength. Urea enhanced fluorescence of Trp and Tyr without altering emission wavelength. These results indicate that the protein solubilizing additives interact with aromatic groups differently.

Long-term effect of curcuminoid treatment on resin-to-dentin bond strength

Endogenous dentin proteases contribute to the degradation of collagen fibrils in the hybrid layer. Recently, inhibition of host-derived proteases by curcuminoids has shown promising results. The aim of this study was to evaluate the effect of curcuminoid treatment on the microtensile bond strength (μTBS) after 24 h or 12 months of storage. Fifty-four extracted sound human molars were flattened to mid-coronal dentin and divided into nine groups. After phosphoric acid-etching for 15 s, the dentin was experimentally treated for 60 s using 100 μM or 200 μM of curcumin, diflourobenzocurcumin, or demethoxycurcumin dissolved in 1% and 2% dimethyl sulfoxide (DMSO)/water solutions. Untreated and DMSO-treated groups served as controls. After bonding agent application, each tooth was restored with dental composite. The molars were sectioned into 0.9 × 0.9 × 6 mm beams. The μTBS testing was performed after 24 h and 12 months of storage in artificial saliva. Data were analyzed using regression analyses. Failure patterns were evaluated using scanning electron microscopy. Dentin treatment with curcuminoids did not adversely affect 24-h μTBS compared to controls. After 12 months, the μTBS of curcuminoid groups was statistically significantly higher than the controls. This study indicates the feasibility of using curcuminoids as protease inhibitors.

The secretion of total and acyl ghrelin from the mouse gastric mucosa: Role of nutrients and the lipid chemosensors FFAR4 and CD36

AIMS

This study investigated the nutrient-mediated modulation of total ghrelin (TG) and acyl ghrelin (AG) secretion from the mouse gastric mucosa, and the role of long-chain fatty acid chemosensors, FFAR4 and CD36, in lipid-mediated modulation of TG and AG release.

METHODS

Ex-vivo experiments were conducted using mouse gastric mucosa to examine the effects of nutrients (D-glucose, L-phenylalanine, peptone (mixture of oligopeptides & single amino acids), D-mannitol, α-linolenic acid and fat emulsion (intralipid)) on TG and AG secretion. Additionally, inhibition of FFAR4 and CD36 on α-linolenic acid and intralipid-mediated regulation of TG and AG secretion was assessed.

RESULTS

TG and AG secretion were unaffected by glucose and D-mannitol. Peptone stimulated the release of TG and AG. In contrast, L-phenylalanine reduced AG secretion only. Intralipid reduced TG secretion and stimulated AG secretion, and α-linolenic acid reduced AG release, without affecting TG mobilisation. Modulation of ghrelin secretion by lipids occurred in an FFAR4 and CD36-independent manner.

CONCLUSION

Ghrelin secretion is modulated in a nutrient-specific manner by proteins and lipids, with TG and AG displaying independent responses to the same stimuli. In addition, FFAR4 and CD36 do not participate in modulation of TG and AG secretion by α-linolenic acid and intralipid.

Hydrophobic Cargo Encapsulation into Virus Protein Cages by Self-Assembly in an Aprotic Organic Solvent

While extensive studies of virus capsid assembly in environments mimicking in vivo conditions have led to an understanding of the thermodynamic driving forces at work, applying this knowledge to virus assembly in other solvents than aqueous buffers has not been attempted yet. In this study, Brome mosaic virus (BMV) capsid proteins were shown to preserve their self-assembly abilities in an aprotic polar solvent, dimethyl sulfoxide (DMSO). This facilitated protein cage encapsulation of nanoparticles and dye molecules that favor organic solvents, such as β-NaYF4-based upconversion nanoparticles and BODIPY dye. Assembly was found to be robust relative to a surprisingly broad range of DMSO concentrations. Cargos with poor initial stability in aqueous solutions were readily encapsulated at high DMSO concentrations and then transferred to aqueous solvents, where they remained stable and preserved their function for months.

Molecular photoswitches in aqueous environments

Molecular photoswitches enable dynamic control of processes with high spatiotemporal precision, using light as external stimulus, and hence are ideal tools for different research areas spanning from chemical biology to smart materials. Photoswitches are typically organic molecules that feature extended aromatic systems to make them responsive to (visible) light. However, this renders them inherently lipophilic, while water-solubility is of crucial importance to apply photoswitchable organic molecules in biological systems, like in the rapidly emerging field of photopharmacology. Several strategies for solubilizing organic molecules in water are known, but there are not yet clear rules for applying them to photoswitchable molecules. Importantly, rendering photoswitches water-soluble has a serious impact on both their photophysical and biological properties, which must be taken into consideration when designing new systems. Altogether, these aspects pose considerable challenges for successfully applying molecular photoswitches in aqueous systems, and in particular in biologically relevant media. In this review, we focus on fully water-soluble photoswitches, such as those used in biological environments, in both in vitro and in vivo studies. We discuss the design principles and prospects for water-soluble photoswitches to inspire and enable their future applications.

Effect of Organic Solvents on the Structure and Activity of a Minimal Lipase

Lipases are ubiquitously used in chemo-enzymatic synthesis and industrial applications. Nevertheless, the modulation of the activity of lipases by organic solvents still is not fully understood at the molecular level. We systematically investigated the activity and structure of lipase A from Bacillus subtilis in binary water-organic solvent mixtures of dimethyl sulfoxide (DMSO), acetonitrile (ACN), and isopropyl alcohol (IPA) using activity assays, fluorescence spectroscopy, molecular dynamics (MD) simulations, and FRET/MD analysis. The enzymatic activity strongly depended on the type and amount of organic solvent in the reaction media. Whereas IPA and ACN reduced the activity of the enzyme, small concentrations of DMSO led to lipase activation via an uncompetitive mechanism. DMSO molecules did not directly interfere with the binding of the substrate in the active site, contrary to what is known for other solvents and enzymes. We propose that the His156-Asp133 interaction, the binding of organic molecules to the active site, and the water accessibility of the substrate are key factors modulating the catalytic activity. Furthermore, we rationalized the role of solvent descriptors on the regulation of enzymatic activity in mixtures with low concentrations of the organic molecule, with prospective implications for the optimization of biocatalytic processes via solvent tuning.

Insight into the protein salting-in mechanism of arginine, magnesium chloride and ethylene glycol: Solvent interaction with aromatic solutes

Key factors in the salting-in effects on proteins of additives are their interactions with aromatic groups. We studied the interaction of four aromatic solutes, benzyl alcohol (BA), phenol, 4-hydroxybenzyl alcohol (4-HBA) and methyl gallate (MG), with different salting-in additives, arginine hydrochloride (ArgHCl), magnesium chloride (MgCl₂), ethylene glycol (EG), and guanidine hydrochloride (GdnHCl) using solubility measurements. We used sodium chloride (NaCl) as a control. MgCl₂ decreased the solubility of the four aromatic solutes with weak solute dependence. In contrast, ArgHCl, GdnHCl, and EG increased the solubility of four aromatic solutes with a similar solute dependence. Their salting-in effects were weaker on BA and 4-HBA and stronger on phenol and MG. These results indicate that attached groups alter the aromatic properties, affecting the interactions between the benzene ring and these three additives. More importantly, the observed results demonstrate that the salting-in mechanism is different between MgCl₂, EG and ArgHCl, which should play a role in their effects on protein solubility.

Chemical rescue of mutant proteins in living Saccharomyces cerevisiae cells by naturally occurring small molecules

Intracellular proteins function in a complex milieu wherein small molecules influence protein folding and act as essential cofactors for enzymatic reactions. Thus protein function depends not only on amino acid sequence but also on the concentrations of such molecules, which are subject to wide variation between organisms, metabolic states, and environmental conditions. We previously found evidence that exogenous guanidine reverses the phenotypes of specific budding yeast septin mutants by binding to a WT septin at the former site of an Arg side chain that was lost during fungal evolution. Here, we used a combination of targeted and unbiased approaches to look for other cases of "chemical rescue" by naturally occurring small molecules. We report in vivo rescue of hundreds of Saccharomyces cerevisiae mutants representing a variety of genes, including likely examples of Arg or Lys side chain replacement by the guanidinium ion. Failed rescue of targeted mutants highlight features required for rescue, as well as key differences between the in vitro and in vivo environments. Some non-Arg mutants rescued by guanidine likely result from "off-target" effects on specific cellular processes in WT cells. Molecules isosteric to guanidine and known to influence protein folding had a range of effects, from essentially none for urea, to rescue of a few mutants by DMSO. Strikingly, the osmolyte trimethylamine-N-oxide rescued ∼20% of the mutants we tested, likely reflecting combinations of direct and indirect effects on mutant protein function. Our findings illustrate the potential of natural small molecules as therapeutic interventions and drivers of evolution.

Advanced biomaterials in cell preservation: Hypothermic preservation and cryopreservation

Cell-based medicine has made great advances in clinical diagnosis and therapy for various refractory diseases, inducing a growing demand for cell preservation as support technology. However, the bottleneck problems in cell preservation include low efficiency and poor biocompatibility of traditional protectants. In this review, cell preservation technologies are categorized according to storage conditions: hypothermic preservation at 1 °C~35 °C to maintain short-term cell viability that is useful in cell diagnosis and transport, while cryopreservation at -196 °C~-80 °C to maintain long-term cell viability that provides opportunities for therapeutic cell product storage. Firstly, the background and developmental history of the protectants used in the two preservation technologies are briefly introduced. Secondly, the progress in different cellular protection mechanisms for advanced biomaterials are discussed in two preservation technologies. In hypothermic preservation, the hypothermia-induced and extracellular matrix-loss injuries to cells are comprehensively summarized, as well as the recent biomaterials dependent on regulation of cellular ATP level, stabilization of cellular membrane, balance of antioxidant defense system, and supply of mimetic ECM to prolong cell longevity are provided. In cryopreservation, cellular injuries and advanced biomaterials that can protect cells from osmotic or ice injury, and alleviate oxidative stress to allow cell survival are concluded. Last, an insight into the perspectives and challenges of this technology is provided. We envision advanced biocompatible materials for highly efficient cell preservation as critical in future developments and trends to support cell-based medicine. STATEMENT OF SIGNIFICANCE: Cell preservation technologies present a critical role in cell-based applications, and more efficient biocompatible protectants are highly required. This review categorizes cell preservation technologies into hypothermic preservation and cryopreservation according to their storage conditions, and comprehensively reviews the recently advanced biomaterials related. The background, development, and cellular protective mechanisms of these two preservation technologies are respectively introduced and summarized. Moreover, the differences, connections, individual demands of these two technologies are also provided and discussed.

Dimethyl sulfoxide reduces the stability but enhances catalytic activity of the main SARS-CoV-2 protease 3CLpro

Severe acute respiratory syndrome coronavirus 2 (SARS‐CoV‐2) is responsible for coronavirus disease 2019 (COVID‐19), one of the most challenging global pandemics of the modern era. Potential treatment strategies against COVID‐19 are yet to be devised. It is crucial that antivirals that interfere with the SARS‐CoV‐2 life cycle be identified and developed. 3‐Chymotrypsin‐like protease (3CLpro) is an attractive antiviral drug target against SARS‐CoV‐2, and coronaviruses in general, because of its role in the processing of viral polyproteins. Inhibitors of 3CLpro activity are screened in enzyme assays before further development of the most promising leads. Dimethyl sulfoxide (DMSO) is a common additive used in such assays and enhances the solubility of assay components. However, it may also potentially affect the stability and efficiency of 3CLpro but, to date, this effect had not been analyzed in detail. Here, we investigated the effect of DMSO on 3CLpro‐catalyzed reaction. While DMSO (5%‐20%) decreased the optimum temperature of catalysis and thermodynamic stability of 3CLpro, it only marginally affected the kinetic stability of the enzyme. Increasing the DMSO concentration up to 20% improved the catalytic efficiency and peptide‐binding affinity of 3CLpro. At such high DMSO concentration, the solubility and stability of peptide substrate were improved because of reduced aggregation. In conclusion, we recommend 20% DMSO as the minimum concentration to be used in screens of 3CLpro inhibitors as lead compounds for the development of antiviral drugs against COVID‐19.

Affinity precipitation of monoclonal antibodies using ELP-Z in the elution without resolubilization mode

This paper describes a simplified affinity precipitation process for the purification of mAbs from complex mixtures using elastin-like polypeptide fused to a single Z domain of protein A (ELP-Z). This approach eliminates several steps in the original process by directly extracting the mAb from the affinity precipitate, without the need for resolubilization. The efficacy of this elution without resolubilization (EWR) approach for obtaining pure mAb is demonstrated and the effects of mixing are examined. This simplification of the affinity precipitation process may facilitate the implementation of ELP-Z based mAb bioprocessing, particularly in a continuous scenario.

Catalytic Dyad Residues His41 and Cys145 Impact the Catalytic Activity and Overall Conformational Fold of the Main SARS-CoV-2 Protease 3-Chymotrypsin-Like Protease

Coronaviruses are responsible for multiple pandemics and millions of deaths globally, including the current pandemic of coronavirus disease 2019 (COVID-19). Development of antivirals against coronaviruses, including the severe acute respiratory syndrome-coronavirus 2 (SARS-CoV-2) responsible for COVID-19, is essential for containing the current and future coronavirus outbreaks. SARS-CoV-2 proteases represent important targets for the development of antivirals because of their role in the processing of viral polyproteins. 3-Chymotrypsin-like protease (3CLpro) is one such protease. The cleavage of SARS-CoV-2 polyproteins by 3CLpro is facilitated by a Cys145–His41 catalytic dyad. We here characterized the catalytic roles of the cysteine–histidine pair for improved understanding of the 3CLpro reaction mechanism, to inform the development of more effective antivirals against Sars-CoV-2. The catalytic dyad residues were substituted by site-directed mutagenesis. All substitutions tested (H41A, H41D, H41E, C145A, and C145S) resulted in a complete inactivation of 3CLpro, even when amino acids with a similar catalytic function to that of the original residues were used. The integrity of the structural fold of enzyme variants was investigated by circular dichroism spectroscopy to test if the catalytic inactivation of 3CLpro was caused by gross changes in the enzyme secondary structure. C145A, but not the other substitutions, shifted the oligomeric state of the enzyme from dimeric to a higher oligomeric state. Finally, the thermodynamic stability of 3CLpro H41A, H41D, and C145S variants was reduced relative the wild-type enzyme, with a similar stability of the H41E and C145A variants. Collectively, the above observations confirm the roles of His41 and Cys145 in the catalytic activity and the overall conformational fold of 3CLpro SARS-CoV-2. We conclude that the cysteine–histidine pair should be targeted for inhibition of 3CLpro and development of antiviral against COVID-19 and coronaviruses.

Identification and Kinetic Characterization of Serum- and Glucocorticoid-Regulated Kinase Inhibitors Using a Fluorescence Polarization-Based Assay

The serum- and glucocorticoid-regulated kinase (SGK) family consists of three isoforms (SGK1, SGK2, and SGK3) that have been implicated in the regulation of tumor growth, metastasis, autophagy, and epithelial ion transport. SGK1 and SGK3 play essential roles in protein kinase B (AKT or PKB)-independent phosphoinositide 3-kinases (PI3K)-mediated tumorigenesis, as evidenced by the significantly elevated expression levels of SGK1 and SGK3 in many cancers, including prostate cancer, colorectal carcinoma, estrogen-dependent breast cancer, and glioblastoma. Therefore, SGK is a potential target for anticancer therapy. A small kinase-focused library comprising 160 compounds was screened against SGK1 using a fluorescence polarization-based kinase assay that yielded a Z'-factor of 0.82. Among the 39 compounds obtained as initial hits in a primary screen, 12 compounds contained the thiazolidine-2,4-dione scaffold. The inhibitory mechanisms of the most potent hit, KMU010402, were further investigated using kinetic analyses, followed by determination of the inhibition constants for SGK1, SGK2, and SGK3. Molecular modeling was used to propose a potential binding mode of KMU010402 to SGK1.