Collagen I self-assembly: revealing the developing structures that generate turbidity

A Systems Approach to Study Collagen Type I Self-Assembly: Kinetics and Morphology

Collagen type I, the main component of the extracellular matrix in vertebrates, is widely used in tissue engineering applications. This is on account that collagen molecules can self-assemble under certain conditions into 3D fibrillar hydrogels. Although there is an extensive body of literature studying collagen self-assembly, there is a lack of systematic understanding on how different experimental factors, such as pH and temperature, and their cumulative effects guide the self-assembly process. In this work, a comprehensive workflow to study the interactive effects of several assembly parameters on the collagen self-assembly process is implemented. This workflow consists of: 1) efficient statistical sampling based on Design of Experiments, 2) high-throughput and automated data collection and 3) automated data analysis. This approach enables to screen several parameters simultaneously and derive a set of mathematical equations that link parameters with the kinetics and morphological aspects of collagen self-assembly, and can be used to design collagen constructs with predefined characteristics.

Fibrillogenesis in collagen hydrogels accelerated by carboxylated microbeads

Collagen type I is a material widely used for 3D cell culture and tissue engineering. Different architectures, such as gels, sponges, membranes, and nanofibers, can be fabricated with it. In collagen hydrogels, the formation of fibrils and fibers depends on various parameters, such as the source of collagen, pH, temperature, concentration, age, etc. In this work, we study the fibrillogenesis process in collagen type I hydrogels with different types of microbeads embedded, using optical techniques such as turbidity assay and confocal reflectance microscopy. We observe that microbeads embedded in the collagen matrix hydrogels modify the fibrillogenesis. Our results show that carboxylated fluorescent microbeads accelerate 3.6 times the gelation, while silica microbeads slow down the formation of collagen fibrils by a factor of 1.9, both compared to pure collagen hydrogels. Our observations suggest that carboxylate microbeads act as nucleation sites and the early collagen fibrils bind to the microbeads.

Competition among physical, chemical, and hybrid gelation mechanisms in biopolymers

Depending on how they form their linkages, biopolymer gelatin gels are commonly classified as physical, chemical, or hybrid; in gelatin hybrid gels, the physical and chemical crosslinking mechanisms occur simultaneously. The viscoelastic behavior of gels following different gelation processes was determined around the gel point. Their gel fractal dimensions were obtained using the BST-scaling model from large amplitude oscillatory shear results. The fractal dimension of hybrid gels is between 1.46 and 1.60, depending on the dominant crosslinking process. The main features of the Lissajous-Bowditch curves were determined for maturated gels that follow different gelation processes, and it is possible to observe the dominant gelation mechanism. The gelation kinetics process is followed by measuring the mean squared displacement (MSD) of microspheres embedded in gelatin solutions using diffusion wave spectroscopy, which in turn allows evaluating G'(ω) and G''(ω), the persistence length, and the mesh size as a function of time throughout the gelation process. The MSD, as a function of elapsed time from the start of the gelation process, follows a behavior that depends on the gelation processes. As time elapses after gelation starts, the persistence length of the unstructured, non-bonded flexible polymer sections decreases due to the formation of bonds. In the hybrid case, it is not a mixture of both processes; they are not independent when occurring simultaneously. The time evolution of the gel network's mesh size roughly follows an exponential decay.

Elucidating the role of water in collagen self-assembly by isotopically modulating collagen hydration

Water is known to play an important role in collagen self-assembly, but it is still largely unclear how water-collagen interactions influence the assembly process and determine the fibril network properties. Here, we use the H[Formula: see text]O/D[Formula: see text]O isotope effect on the hydrogen-bond strength in water to investigate the role of hydration in collagen self-assembly. We dissolve collagen in H[Formula: see text]O and D[Formula: see text]O and compare the growth kinetics and the structure of the collagen assemblies formed in these water isotopomers. Surprisingly, collagen assembly occurs ten times faster in D[Formula: see text]O than in H[Formula: see text]O, and collagen in D[Formula: see text]O self-assembles into much thinner fibrils, that form a more inhomogeneous and softer network, with a fourfold reduction in elastic modulus when compared to H[Formula: see text]O. Combining spectroscopic measurements with atomistic simulations, we show that collagen in D[Formula: see text]O is less hydrated than in H[Formula: see text]O. This partial dehydration lowers the enthalpic penalty for water removal and reorganization at the collagen-water interface, increasing the self-assembly rate and the number of nucleation centers, leading to thinner fibrils and a softer network. Coarse-grained simulations show that the acceleration in the initial nucleation rate can be reproduced by the enhancement of electrostatic interactions. These results show that water acts as a mediator between collagen monomers, by modulating their interactions so as to optimize the assembly process and, thus, the final network properties. We believe that isotopically modulating the hydration of proteins can be a valuable method to investigate the role of water in protein structural dynamics and protein self-assembly.

Chondroitin sulfate, dermatan sulfate, and hyaluronic acid differentially modify the biophysical properties of collagen-based hydrogels

Fibrillar collagens and glycosaminoglycans (GAGs) are structural biomolecules that are natively abundant to the extracellular matrix (ECM). Prior studies have quantified the effects of GAGs on the bulk mechanical properties of the ECM. However, there remains a lack of experimental studies on how GAGs alter other biophysical properties of the ECM, including ones that operate at the length scales of individual cells such as mass transport efficiency and matrix microstructure. This study focuses on the GAG molecules chondroitin sulfate (CS), dermatan sulfate (DS), and hyaluronic acid (HA). CS and DS are stereoisomers while HA is the only non-sulfated GAG. We characterized and decoupled the effects of these GAG molecules on the stiffness, transport, and matrix microarchitecture properties of type I collagen hydrogels using mechanical indentation testing, microfluidics, and confocal reflectance imaging, respectively. We complement these biophysical measurements with turbidity assays to profile collagen aggregate formation. Surprisingly, only HA enhanced the ECM indentation modulus, while all three GAGs had no effect on hydraulic permeability. Strikingly, we show that CS, DS, and HA differentially regulate the matrix microarchitecture of hydrogels due to their alterations to the kinetics of collagen self-assembly. In addition to providing information on how GAGs define key physical properties of the ECM, this work shows new ways in which stiffness measurements, microfluidics, microscopy, and turbidity kinetics can be used complementarily to reveal details of collagen self-assembly and structure. STATEMENT OF SIGNIFICANCE: Collagen and glycosaminoglycans (GAGs) are integral to the structure, function, and bioactivity of the extracellular matrix (ECM). Despite widespread interest in collagen-GAG composite hydrogels, there is a lack of quantitative understanding of how different GAGs alter the biophysical properties of the ECM across tissue, cellular, and subcellular length scales. Here we show using mechanical, microfluidic, microscopy, and analytical methods and measurements that the GAG molecules chondroitin sulfate, dermatan sulfate, and hyaluronic acid differentially regulate the mechanical, transport, and microstructural properties of hydrogels due to their alterations to the kinetics of collagen self-assembly. As such, these results will inform improved design and utilization of collagen-based scaffolds of tailored composition, mechanical properties, molecular availability due to mass transport, and microarchitecture.

Characterization and biological evaluation of a novel flavonoid-collagen antioxidant hydrogel with cytoprotective properties

Reactive oxygen species (ROS) play a critical and important role during wound healing but excess ROS at the wound site can lead to cellular damage and sub-optimal healing. Minimizing oxidative damage to the wound site and any supplemental therapeutic cells can be achieved by delivering exogenous antioxidants. Collagen hydrogels are ideal wound care materials due to their biocompatibility, high water content, and porous, three-dimensional architecture. Yet, they lack the inherent antioxidant activity that could help mitigate excess ROS at a wound site. This work formulates and evaluates the in vitro biocompatibility and antioxidant capabilities of collagen-fibroblast hydrogels combined with the polyphenolic antioxidant luteolin. Collagen solutions mixed with luteolin readily assembled into robust hydrogels with increasing gel strength due to increasing concentrations of luteolin. SEM images confirmed a mean pore size of 2.2 μm and a drastically different macromolecular ultrastructure with extensive fine crosslinking relative to collagen. Adequate cell viability and metabolic activity of dermal fibroblasts cultured within the gels were measured across all formulations, resulting in higher antioxidant activity and more than double the protection to cells from oxidative damage than traditional collagen hydrogels. Given these results, luteolin-collagen hydrogels demonstrate the potential for superior wound-healing properties when compared to collagen alone.

3D Bioprinting of Neurovascular Tissue Modeling with Collagen-Based Low-Viscosity Composites

In vitro neurovascular unit (NVU) models are valuable for investigating brain functions and developing drugs. However, it remains challenging to recapitulate the native architectural features and ultra-soft extracellular matrix (ECM) properties of the natural NVU. Cell-laden bioprinting is promising to prepare complex living tissues, but hard to balance the fidelity and cell growth. This study proposes a novel two-stage methodology for biomanufacturing functional 3D neurovascular constructs in vitro with low modulus of ECM. At the shaping stage, a low-viscosity alginate/collagen is printed through an embedded approach; at the culturing stage, the alginate is removed through targeted lysing. The low-viscosity and rapid crosslinking properties provide a printing resolution of ≈10 µm, and the lysis processing can decrease the hydrogels' modulus to ≈1 kPa and adjust the porosity of the microstructure, providing cells with an environment closing to the brain ECM. A 3D hollow coaxial neurovascular model is fabricated, in which the endothelial cells has expressed tight junction proteins and shown selective permeability, and the astrocytes outside of the endothelial layer are found to spread out with branches and directly interact with endothelial cells. The present study offers a promising modeling method for better understanding the NVU function and screening neuro-drugs.

Network architecture dependent mechanical response in temperature responsive collagen-PNIPAM composites

Collagen is the most abundant protein in the mammalian extracellular matrix. In-vitro collagen-based materials with specific mechanical properties are important for various bio-medical and tissue-engineering applications. Here, we study the reversible mechanical switching behaviour of a bio-compatible composite formed by collagen networks seeded with thermo-responsive poly(N-isopropylacrylamide) (PNIPAM) microgel particles, by exploiting the swelling/de-swelling of the particles across the lower critical solution temperature (LCST). Interestingly, we find that the shear modulus of the system reversibly enhances whenever the diameter of the microgel particles is changed from that corresponding to the polymerization temperature of the composite, irrespective of swelling or, de-swelling. However, the degree of such enhancement significantly depends on the temperature-dependent collagen network architecture quantified by the mesh size of the network. Furthermore, confocal imaging of the composite during the temperature switching reveals that the reversible clustering of microgel particles above LCST plays a crucial role in the observed switching response.

Chondroitin sulfate, dermatan sulfate, and hyaluronic acid differentially modify the biophysical properties of collagen-based hydrogels

Fibrillar collagens and glycosaminoglycans (GAGs) are structural biomolecules that are natively abundant to the extracellular matrix (ECM). Prior studies have quantified the effects of GAGs on the bulk mechanical properties of the ECM. However, there remains a lack of experimental studies on how GAGs alter other biophysical properties of the ECM, including ones that operate at the length scales of individual cells such as mass transport efficiency and matrix microstructure. Here we characterized and decoupled the effects of the GAG molecules chondroitin sulfate (CS) dermatan sulfate (DS) and hyaluronic acid (HA) on the stiffness (indentation modulus), transport (hydraulic permeability), and matrix microarchitecture (pore size and fiber radius) properties of collagen-based hydrogels. We complement these biophysical measurements of collagen hydrogels with turbidity assays to profile collagen aggregate formation. Here we show that CS, DS, and HA differentially regulate the biophysical properties of hydrogels due to their alterations to the kinetics of collagen self-assembly. In addition to providing information on how GAGs play significant roles in defining key physical properties of the ECM, this work shows new ways in which stiffness measurements, microscopy, microfluidics, and turbidity kinetics can be used complementary to reveal details of collagen self-assembly and structure.

Decellularized ECM hydrogels: prior use considerations, applications, and opportunities in tissue engineering and biofabrication

Tissue development, wound healing, pathogenesis, regeneration, and homeostasis rely upon coordinated and dynamic spatial and temporal remodeling of extracellular matrix (ECM) molecules. ECM reorganization and normal physiological tissue function, require the establishment and maintenance of biological, chemical, and mechanical feedback mechanisms directed by cell-matrix interactions. To replicate the physical and biological environment provided by the ECM in vivo, methods have been developed to decellularize and solubilize tissues which yield organ and tissue-specific bioactive hydrogels. While these biomaterials retain several important traits of the native ECM, the decellularizing process, and subsequent sterilization, and solubilization result in fragmented, cleaved, or partially denatured macromolecules. The final product has decreased viscosity, moduli, and yield strength, when compared to the source tissue, limiting the compatibility of isolated decellularized ECM (dECM) hydrogels with fabrication methods such as extrusion bioprinting. This review describes the physical and bioactive characteristics of dECM hydrogels and their role as biomaterials for biofabrication. In this work, critical variables when selecting the appropriate tissue source and extraction methods are identified. Common manual and automated fabrication techniques compatible with dECM hydrogels are described and compared. Fabrication and post-manufacturing challenges presented by the dECM hydrogels decreased mechanical and structural stability are discussed as well as circumvention strategies. We further highlight and provide examples of the use of dECM hydrogels in tissue engineering and their role in fabricating complex in vitro 3D microenvironments.

Self-assembly of mesoscale collagen architectures and applications in 3D cell migration

3D in vitro tumor models have recently been investigated as they can recapitulate key features in the tumor microenvironment. Reconstruction of a biomimetic scaffold is critical in these models. However, most current methods focus on modulating local properties, e.g. micro- and nano-scaled topographies, without capturing the global millimeter or intermediate mesoscale features. Here we introduced a method for modulating the collagen I-based extracellular matrix structure by disruption of fibrillogenesis and the gelation process through mechanical agitation. With this method, we generated collagen scaffolds that are thickened and wavy at a larger scale while featuring global softness. Thickened collagen patches were interconnected with loose collagen networks, highly resembling collagen architecture in the tumor stroma. This thickened collagen network promoted tumor cell dissemination. In addition, this novel modified scaffold triggered differences in morphology and migratory behaviors of tumor cells. Altogether, our method for altered collagen architecture paves new ways for studying in detail cell behavior in physiologically relevant biological processes. STATEMENT OF SIGNIFICANCE: Tumor progression usually involves chronic tissue damage and repair processes. Hallmarks of tumors are highly overlapped with those of wound healing. To mimic the tumor milieu, collagen-based scaffolds are widely used. These scaffolds focus on modulating microscale topographies and mechanics, lacking global architecture similarity compared with in vivo architecture. Here we introduced one type of thick collagen bundles that mimics ECM architecture in human skin scars. These thickened collagen bundles are long and wavy while featuring global softness. This collagen architecture imposes fewer steric restraints and promotes tumor cell dissemination. Our findings demonstrate a distinct picture of cell behaviors and intercellular interactions, highlighting the importance of collagen architecture and spatial heterogeneity of the tumor microenvironment.

Birefringence effect studies of collagen formed by nonenzymatic glycation using dual-retarder Mueller polarimetry

SIGNIFICANCE

Nonenzymatic glycation of collagen covalently attaches an addition of sugar molecules that initially were involved in a reversibly reaction with amino groups on the protein. Due to the ultimate formation of stable irreversible advanced glycation end products, the process of glycation leads to abnormal irreversible cross-linking, which ultimately accumulates with age and/or diabetes in the extracellular matrix, altering its organization.

AIM

We report the use of dual-retarder Mueller polarimetry in conjunction with phase retardance to differentiate collagen cross-linking in a normal collagen gel matrix from that in tissues with nonenzymatic cross-linking.

APPROACH

A dual-liquid crystal-based Mueller polarimetry system that involves electronic modulation of polarization state generators (PSGs) was employed to produce all types of polarization states without moving any part and enable detection of the signal directly using a Stokes polarimeter. The linear phase retardance response was obtained for the characterization of the solution and gel forms of collagen using differential Mueller matrix analysis.

RESULTS

We found that linear phase retardance measurements via differential Mueller matrix polarimetry successfully differentiated collagen gel matrices with different degrees of cross-linking formed by a nonenzymatic glycation process and demonstrated that this technology constitutes a quick and simple modality.

CONCLUSIONS

This approach has high sensitivity for studying differences in fibrillar cross-linking in glycated collagen. Further, our work suggests that this method of structural analysis has potential clinical diagnostic value owing to its noninvasive and cost-efficient nature.

A proteomic approach reveals biomineralization and immune response for mantle to pearl sac in the freshwater pearl mussel (Hyriopsis cumingii)

In the process of production of freshwater pearl, implanted mantle pieces undergo a series of complex physiological and biochemical processes to form pearl sac, which produce pearl. This is a very important site of occurrence due to immune-induced biomineralization, while its molecular regulatory mechanism is still unclear. Here, we use proteomics to identify differentially expressed proteins (DEPs) of the mantle and pearl sac and examine the biomineralization and immune response of the pearl sac formation process in Hyriopsis cumingii. Using iTRAQ technology and bioinformatics analysis, we obtained DEP profiles between the mantle and pearl sac. A total of 1871 proteins were identified. Of these, 74 DEPs were found between the pearl sac and outer mantle, 112 DEPs between the pearl sac and inner mantle, and 124 DEPs between the outer and inner mantles. Bioinformatics analysis revealed that the screened biomineralization-related DEPs were mainly enriched in signaling pathways associated with calcium signaling, regulation of the actin cytoskeleton and protein processing in the endoplasmic reticulum, while the immune-related DEPs were mainly enriched in the Notch, Hippo, nuclear factor kappa-B (NF-κB), and transforming growth factor-β (TGF-β) signaling pathways. In addition, the expression of six biomineralization-related and four immune-related proteins were verified at the transcriptional level using quantitative real-time PCR. Our findings contribute to furthering the understanding of the mechanisms of pearl formation and immune response, and have long-term implications for future studies on the production of high-quality freshwater pearls and development of the freshwater pearl industry.

The Applicability of Current Turbidimetric Approaches for Analyzing Fibrin Fibers and Other Filamentous Networks

Turbidimetry is an experimental technique often used to study the structure of filamentous networks. To extract structural properties such as filament diameter from turbidimetric data, simplifications to light scattering theory must be employed. In this work, we evaluate the applicability of three commonly utilized turbidimetric analysis approaches, each using slightly different simplifications. We make a specific application towards analyzing fibrin fibers, which form the structural scaffold of blood clots, but the results are generalizable. Numerical simulations were utilized to assess the applicability of each approach across a range of fiber lengths and diameters. Simulation results indicated that all three turbidimetric approaches commonly underestimate fiber diameter, and that the “Carr-Hermans” approach, utilizing wavelengths in the range of 500−800 nm, provided <10% error for the largest number of diameter/length combinations. These theoretical results were confirmed, under select conditions, via the comparison of fiber diameters extracted from experimental turbidimetric data, with diameters obtained using super-resolution microscopy.

Phytoglycogen Encapsulation of Lanthanide-Based Nanoparticles as an Optical Imaging Platform with Therapeutic Potential

Lanthanide-based upconverting nanoparticles (UCNPs) are largely sought-after for biomedical applications ranging from bioimaging to therapy. A straightforward strategy is proposed here using the naturally sourced polymer phytoglycogen to coencapsulate UCNPs with hydrophobic photosensitizers as an optical imaging platform and light-induced therapeutic agents. The resulting multifunctional sub-micrometer-sized luminescent beads are shown to be cytocompatible as carrier materials, which encourages the assessment of their potential in biomedical applications. The loading of UCNPs of various elemental compositions enables multicolor hyperspectral imaging of the UCNP-loaded beads, endowing these materials with the potential to serve as luminescent tags for multiplexed imaging or simultaneous detection of different moieties under near-infrared (NIR) excitation. Coencapsulation of UCNPs and Rose Bengal opens the door for potential application of these microcarriers for collagen crosslinking. Alternatively, coloading UCNPs with Chlorin e6 enables NIR-light triggered generation of reactive oxygen species. Overall, the developed encapsulation methodology offers a straightforward and noncytotoxic strategy yielding water-dispersible UCNPs while preserving their bright and color-tunable upconversion emission that would allow them to fulfill their potential as multifunctional platforms for biomedical applications.

Stretchy and disordered: Toward understanding fracture in soft network materials via mesoscopic computer simulations

Soft network materials exist in numerous forms ranging from polymer networks, such as elastomers, to fiber networks, such as collagen. In addition, in colloidal gels, an underlying network structure can be identified, and several metamaterials and textiles can be considered network materials as well. Many of these materials share a highly disordered microstructure and can undergo large deformations before damage becomes visible at the macroscopic level. Despite their widespread presence, we still lack a clear picture of how the network structure controls the fracture processes of these soft materials. In this Perspective, we will focus on progress and open questions concerning fracture at the mesoscopic scale, in which the network architecture is clearly resolved, but neither the material-specific atomistic features nor the macroscopic sample geometries are considered. We will describe concepts regarding the network elastic response that have been established in recent years and turn out to be pre-requisites to understand the fracture response. We will mostly consider simulation studies, where the influence of specific network features on the material mechanics can be cleanly assessed. Rather than focusing on specific systems, we will discuss future challenges that should be addressed to gain new fundamental insights that would be relevant across several examples of soft network materials.

Variation in Hydrogel Formation and Network Structure for Telo-, Atelo- and Methacrylated Collagens

As the most abundant protein in the extracellular matrix, collagen has become widely studied in the fields of tissue engineering and regenerative medicine. Of the various collagen types, collagen type I is the most commonly utilised in laboratory studies. In tissues, collagen type I forms into fibrils that provide an extended fibrillar network. In tissue engineering and regenerative medicine, little emphasis has been placed on the nature of the network that is formed. Various factors could affect the network structure, including the method used to extract collagen from native tissue, since this may remove the telopeptides, and the nature and extent of any chemical modifications and crosslinking moieties. The structure of any fibril network affects cellular proliferation and differentiation, as well as the overall modulus of hydrogels. In this study, the network-forming properties of two distinct forms of collagen (telo- and atelo-collagen) and their methacrylated derivatives were compared. The presence of the telopeptides facilitated fibril formation in the unmodified samples, but this benefit was substantially reduced by subsequent methacrylation, leading to a loss in the native self-assembly potential. Furthermore, the impact of the methacrylation of the collagen, which enables rapid crosslinking and makes it suitable for use in 3D printing, was investigated. The crosslinking of the methacrylated samples (both telo- and atelo-) was seen to improve the fibril-like network compared to the non-crosslinked samples. This contrasted with the samples of methacrylated gelatin, which showed little, if any, fibrillar or ordered network structure, regardless of whether they were crosslinked.

Lose the stress: Viscoelastic materials for cell engineering

Biomaterials are widely used to study and control a variety of cell behaviors, including stem cell differentiation, organogenesis, and tumor invasion. While considerable attention has historically been paid to biomaterial elastic (storage) properties, it has recently become clear that viscous (loss) properties can also powerfully influence cell behavior. Here we review advances in viscoelastic materials for cell engineering. We begin by discussing collagen, an abundant naturally occurring biomaterial that derives its viscoelastic properties from its fibrillar architecture, which enables dissipation of applied stresses. We then turn to two other naturally occurring biomaterials that are more frequently modified for engineering applications, alginate and hyaluronic acid, whose viscoelastic properties may be tuned by modulating network composition and crosslinking. We also discuss the potential of exploiting engineered fibrous materials, particularly electrospun fiber-based materials, to control viscoelastic properties. Finally, we review mechanisms through which cells process viscous and viscoelastic cues as they move along and within these materials. The ability of viscoelastic materials to relax cell-imposed stresses can dramatically alter migration on two-dimensional surfaces and confinement-imposed barriers to engraftment and infiltration in three-dimensional scaffolds. STATEMENT OF SIGNIFICANCE: Most tissues and many biomaterials exhibit some viscous character, a property that is increasingly understood to influence cell behavior in profound ways. This review discusses the origin and significance of viscoelastic properties of common biomaterials, as well as how these cues are processed by cells to influence migration. A deeper understanding of the mechanisms of viscoelastic behavior in biomaterials and how cells interpret these inputs should aid the design and selection of biomaterials for specific applications.

Integration of collagen fibers in connective tissue with dental implant in the transmucosal region

Dental implants have been widely accepted as an ideal therapy to replace the missing teeth for its good performance in aspects of mechanical properties and aesthetic outcomes. Its restorative success is contributed by not only the successful osseointegration of the implant but also the tight soft tissue integration, especially the collagen fibers, in the transmucosal region. Soft tissue attaching to the dental implant/abutment is overall similar, but in some aspects distinct with that seen around natural teeth and soft tissue integration can be enhanced via several surface modification methods. This review is going to focus on the current knowledge of the transmucosal zone around the dental implants (compared with natural teeth), and latest strategies in use to fine-tune the collagen fibers assembly in the connective tissue, in an attempt to enhance soft tissue integration.

Decellularized peripheral nerve as an injectable delivery vehicle for neural applications

Damage to the nervous system can result in loss of sensory and motor function, paralysis, or even death. To facilitate neural regeneration and functional recovery, researchers have employed biomaterials strategies to address both peripheral and central nervous system injuries. Injectable hydrogels that recapitulate native nerve extracellular matrix are especially promising for neural tissue engineering because they offer more flexibility for minimally invasive applications and provide a growth-permissive substrate for neural cell types. Here, we explore the development of injectable hydrogels derived from decellularized rat peripheral nerves (referred to as "injectable peripheral nerve [iPN] hydrogels"), which are processed using a newly developed sodium deoxycholate and DNase (SDD) decellularization method. We assess the gelation kinetics, mechanical properties, cell bioactivity, and drug release kinetics of the iPN hydrogels. The iPN hydrogels thermally gel when exposed to 37°C in under 20 min and have mechanical properties similar to neural tissue. The hydrogels demonstrate in vitro biocompatibility through support of Schwann cell viability and metabolic activity. Additionally, iPN hydrogels promote greater astrocyte spreading compared to collagen I hydrogels. Finally, the iPN is a promising delivery vehicle of drug-loaded microparticles for a combinatorial approach to neural injury therapies.

Progress on Biomimetic Mineralization and Materials for Hard Tissue Regeneration

Biomineralization is a process in which natural organisms regulate the crystal growth of inorganic minerals, resulting in hierarchical structured biominerals with excellent properties. Typical biominerals in the human body are the bones and teeth, and damage to these hard tissues directly affect our daily lives. The repair of bones and teeth in a biomimetic way, either by using a biomimetic mineralization strategy or biomimetic materials, is the key for hard tissue regeneration. In this review, we briefly introduce the structure of bone and tooth, and highlight the fundamental role of collagen mineralization in tissue repair. The recent progress on intra-/extrafibrillar collagen mineralization by a biomimetic strategy or materials is presented, and their potential for tissue regeneration is discussed. Then, recent achievements on bone and tooth repair are summarized, and these works are discussed in the view of materials science and biological science, providing a broader vision for the future research of hard tissue repair techniques. Lastly, recent progress on hard tissue regeneration is concluded, and existing problems and future directions are prospected.

Developing exquisite collagen fibrillar assemblies in the presence of keratin nanoparticles for improved cellular affinity

Recently, the collagen-keratin (CK) composites have received much attention for the purpose of biomedical applications due to the intrinsic biocompatibility and biodegradability of these two proteins. However, few studies have reported the CK composites developed by the self-assembly approach and the influence of the keratin on the collagen self-assembly in vitro was still unknown. In this study, the keratin nanoparticles (KNPs) were successfully prepared by the reduction method, and we focused on investigating the effect of the varying concentrations of KNPs on the mechanism of the fibrillogenesis process of collagen. The intermolecular interaction between the two proteins revealed by the ultraviolet spectroscopy, Fourier transform-infrared (FT-IR) spectroscopy and circular dichromatic (CD) spectroscopy showed that KNPs would interact with the collagen, and keratin significantly influenced the hydrogen bonding interaction existed in collagen molecules. The SEM images exhibited the formation of exquisite fibrillar networks after incorporating the KNPs into collagen, and it was conspicuous that the KNPs could uniformly distribute on the surface of collagen fibrils via electrostatic interaction, for both of the two proteins possessed many charged moieties. In addition, the AFM images confirmed the presence of the characteristic D-periodicity of collagen fibrils, indicating that the introduction of KNPs did not disrupt the self-assembly nature of the native collagen. The cell adhesion, proliferation and migration experiments on the CK fibrils were also performed in this study. The results demonstrated that the CK composites showed a better cellular affinity compared with the collagen, thus it might be a promising candidate for the biomedical applications.

Fiber finding algorithm using stepwise tracing to identify biopolymer fibers in noisy 3D images

We present a novel fiber finding algorithm (FFA) that will permit researchers to detect and return traces of individual biopolymers. Determining the biophysical properties and structural cues of biopolymers can permit researchers to assess the progression and severity of disease. Confocal microscopy images are a useful method for observing biopolymer structures in three dimensions, but their utility for identifying individual biopolymers is impaired by noise inherent in the acquisition process, including convolution from the point spread function (PSF). The new, iterative FFA we present here 1) measures a microscope's PSF and uses it as a metric for identifying fibers against the background; 2) traces each fiber within a cone angle; and 3) blots out the identified trace before identifying another fiber. Blotting out the identified traces in each iteration allows the FFA to detect and return traces of single fibers accurately and efficiently-even within fiber bundles. We used the FFA to trace unlabeled collagen type I fibers-a biopolymer used to mimic the extracellular matrix in in vitro cancer assays-imaged by confocal reflectance microscopy in three dimensions, enabling quantification of fiber contour length, persistence length, and three-dimensional (3D) mesh size. Based on 3D confocal reflectance microscopy images and the PSF, we traced and measured the fibers to confirm that colder gelation temperatures increased fiber contour length, persistence length, and 3D mesh size-thereby demonstrating the FFA's use in quantifying biopolymers' structural and physical cues from noisy microscope images.

Targeting the Microtubule-Network Rescues CTL Killing Efficiency in Dense 3D Matrices

Efficacy of cytotoxic T lymphocyte (CTL)-based immunotherapy is still unsatisfactory against solid tumors, which are frequently characterized by condensed extracellular matrix. Here, using a unique 3D killing assay, we identify that the killing efficiency of primary human CTLs is substantially impaired in dense collagen matrices. Although the expression of cytotoxic proteins in CTLs remained intact in dense collagen, CTL motility was largely compromised. Using light-sheet microscopy, we found that persistence and velocity of CTL migration was influenced by the stiffness and porosity of the 3D matrix. Notably, 3D CTL velocity was strongly correlated with their nuclear deformability, which was enhanced by disruption of the microtubule network especially in dense matrices. Concomitantly, CTL migration, search efficiency, and killing efficiency in dense collagen were significantly increased in microtubule-perturbed CTLs. In addition, the chemotherapeutically used microtubule inhibitor vinblastine drastically enhanced CTL killing efficiency in dense collagen. Together, our findings suggest targeting the microtubule network as a promising strategy to enhance efficacy of CTL-based immunotherapy against solid tumors, especially stiff solid tumors.

Synthesis and characterization of chemically fueled supramolecular materials driven by carbodiimide-based fuels

Many supramolecular materials in biological systems are driven to a nonequilibrium state by the irreversible consumption of high-energy molecules such as ATP or GTP. As a result, they exhibit unique dynamic properties such as a tunable lifetime, adaptivity or the ability to self-heal. In contrast, synthetic counterparts that exist in or close to equilibrium are controlled by thermodynamic parameters and therefore lack these dynamic properties. To mimic biological materials more closely, synthetic self-assembling systems have been developed that are driven out of equilibrium by chemical reactions. This protocol describes the synthesis and characterization of such an assembly, which is driven by carbodiimide fuels. Depending on the amount of chemical fuel added to the material, its lifetime can be tuned. In the first step, the protocol details the synthesis and purification of the peptide-based precursors for the fuel-driven assemblies by solid-phase peptide synthesis. Then, we explain how to analyze the kinetic response of the precursors to a carbodiimide-based chemical fuel by HPLC and kinetic models. Finally, we detail how to study the emerging assembly's macro- and microscopic properties by time-lapse photography, UV-visible spectroscopy, shear rheology, confocal laser scanning microscopy and electron microscopy. The procedure is described using the example of a colloid-forming precursor Fmoc-E-OH and a fiber-forming precursor Fmoc-AAD-OH to emphasize the differences in characterization depending on the type of assembly. The characterization of a precursor's transient assembly can be done within 5 d. The synthesis and purification of a peptide precursor requires 2 d of work.

Strain localization and yielding dynamics in disordered collagen networks

Collagen is the most abundant extracellular-matrix protein found in mammals and the main structural and load-bearing element of connective tissues. Collagen networks show remarkable strain-stiffening, which tunes the mechanical functions of tissues and regulates cell behaviours. Linear and non-linear mechanics of in vitro disordered collagen networks have been widely studied using rheology for a range of self-assembly conditions in recent years. However, the correlation between the onset of macroscopic network failure and local deformations is not well understood in these systems. Here, using shear rheology and in situ high-resolution boundary imaging, we study the yielding dynamics of in vitro reconstituted networks of uncrosslinked type-I collagen. We find that in the non-linear regime, the differential shear modulus (K) of the network initially increases with applied strain and then begins to drop as the network starts to yield beyond a critical strain (yield strain). Measurement of the local velocity profile using colloidal tracer particles reveals that beyond the peak of K, strong strain-localization and slippage between the network and the rheometer plate sets in that eventually leads to a detachment. We generalize this observation for a range of collagen concentrations, applied strain ramp rates, as well as, different network architectures obtained by varying the polymerization temperature. Furthermore, using a continuum affine network model, we map out a state diagram showing the dependence of yield-stain and -stress on the microscopic network parameters. Our findings can have broad implications in tissue engineering and designing highly resilient biological scaffolds.

Regulatory properties of vitronectin and its glycosylation in collagen fibril formation and collagen-degrading enzyme cathepsin K activity

Vitronectin (VN) is a glycoprotein found in extracellular matrix and blood. Collagen, a major extracellular matrix component in mammals, is degraded by cathepsin K (CatK), which is essential for bone resorption under acidic conditions. The relationship between VN and cathepsins has been unclear. We discovered that VN promoted collagen fibril formation and inhibited CatK activity, and observed its activation in vitro. VN accelerated collagen fibril formation at neutral pH. Collagen fibers formed with VN were in close contact with each other and appeared as scattered flat masses in scanning electron microscopy images. VN formed collagen fibers with high acid solubility and significantly inhibited CatK; the IC₅₀ was 8.1–16.6 nM and competitive, almost the same as those of human and porcine VNs. VN inhibited the autoprocessing of inactive pro-CatK from active CatK. DeN-glycosylation of VN attenuated the inhibitory effects of CatK and its autoprocessing by VN, but had little effect on acid solubilization of collagen and VN degradation via CatK. CatK inhibition is an attractive treatment approach for osteoporosis and osteoarthritis. These findings suggest that glycosylated VN is a potential biological candidate for CatK inhibition and may help to understand the molecular mechanisms of tissue re-modeling.

A 3D, Magnetically Actuated, Aligned Collagen Fiber Hydrogel Platform Recapitulates Physical Microenvironment of Myoblasts for Enhancing Myogenesis

Many cell responses that underlie the development, maturation, and function of tissues are guided by the architecture and mechanical loading of the extracellular matrix (ECM). Because mechanical stimulation must be transmitted through the ECM architecture, the synergy between these two factors is important. However, recapitulating the synergy of these physical microenvironmental cues in vitro remains challenging. To address this, a 3D magnetically actuated collagen hydrogel platform is developed that enables combined control of ECM architecture and mechanical stimulation. With this platform, it is demonstrated how these factors synergistically promote cell alignment of C2C12 myoblasts and enhance myogenesis. This promotion is driven in part by the dynamics of Yes-associated protein and structure of cellular microtubule networks. This facile platform holds great promises for regulating cell behavior and fate, generating a broad range of engineered physiologically representative microtissues in vitro, and quantifying the mechanobiology underlying their functions.

Engineering fiber anisotropy within natural collagen hydrogels

It is well known that biophysical properties of the extracellular matrix (ECM), including stiffness, porosity, composition, and fiber alignment (anisotropy), play a crucial role in controlling cell behavior in vivo. Type I collagen (collagen I) is a ubiquitous structural component in the ECM and has become a popular hydrogel material that can be tuned to replicate the mechanical properties found in vivo. In this review article, we describe popular methods to create 2-D and 3-D collagen I hydrogels with anisotropic fiber architectures. We focus on methods that can be readily translated from engineering and materials science laboratories to the life-science community with the overall goal of helping to increase the physiological relevance of cell culture assays.

Development of novel apoptosis-assisted lung tissue decellularization methods

Decellularized tissues hold great potential for both regenerative medicine and disease modeling applications. The acellular extracellular matrix (ECM)-enriched scaffolds can be recellularized with patient-derived cells prior to transplantation, or digested to create thermally-gelling ECM hydrogels for 3D cell culture. Current methods of decellularization clear cellular components using detergents, which can result in loss of ECM proteins and tissue architectural integrity. Recently, an alternative approach utilizing apoptosis to decellularize excised murine sciatic nerves resulted in superior ECM preservation, cell removal, and immune tolerance in vivo. However, this apoptosis-assisted decellularization approach has not been optimized for other tissues with a more complex geometry, such as lungs. To this end, we developed an apoptosis-assisted lung tissue decellularization method using a combination of camptothecin and sulfobetaine-10 (SB-10) to induce apoptosis and facilitate gentle and effective removal of cell debris, respectively. Importantly, combination of the two agents resulted in superior cell removal and ECM preservation compared to either of the treatments alone, presumably because of pulmonary surfactants. In addition, our method was superior in cell removal compared to a previously established detergent-based decellularization protocol. Furthermore, thermally-gelling lung ECM hydrogels supported high viability of rat lung epithelial cells for up to 2 weeks in culture. This work demonstrates that apoptosis-based lung tissue decellularization is a superior technique that warrants further utilization for both regenerative medicine and disease modeling purposes.

Effect of alkali-neutralization treatment on triple-helical aggregates and independent triple helices of curdlan

Triple-helical aggregates (THAs) have been proven to affect the biological activities and functional properties of triple-helix polysaccharides. Thus, it's urgent to seek a method to reduce the size of THAs while preserving independent triple helices (ITHs). In this study, the effects of alkali-neutralization (AN) treatment on THAs and ITHs of curdlan were studied. The positive values of the Congo red test data (R²>0.99) fitted using a Logistic model indicated that AN treatment (C_NaOH/HCl>0.28 mol/L) facilitated the disaggregation of THAs. Congo red test, sedimentation test, and turbidity test showed that AN treatment (C_NaOH/HCl = 1.0 mol/L) significantly reduced the size of THAs to approximately 1 μm while effectively increasing the relative amount of ITHs to approximately 199 %. Fourier transform infrared spectroscopy and X-ray diffraction analysis showed that AN treatment basically unchanged the primary structure of curdlan chains, but affected the crystalline structure and the intermolecular and intramolecular hydrogen bonding of curdlan.

One-Step Formation of Protein-Based Tubular Structures for Functional Devices and Tissues

Tubular biological structures consisting of extracellular matrix (ECM) proteins and cells are basic functional units of all organs in animals and humans. ECM protein solutions at low concentrations (5-10 milligrams per milliliter) are abundantly used in 3D cell culture. However, their poor "printability" and minute-long gelation time have made the direct extrusion of tubular structures in bioprinting applications challenging. Here, this limitation is overcome and the continuous, template-free conversion of low-concentration collagen, elastin, and fibrinogen solutions into tubular structures of tailored size and radial, circumferential and axial organization is demonstrated. The approach is enabled by a microfabricated printhead for the consistent circumferential distribution of ECM protein solutions and lends itself to scalable manufacture. The attached confinement accommodates minute-long residence times for pH, temperature, light, ionic and enzymatic gelation. Chip hosted ECM tubular structures are amenable to perfusion with aqueous solutions and air, and cyclic stretching. Predictive collapse and reopening in a crossed-tube configuration promote all-ECM valves and pumps. Tissue level function is demonstrated by factors secreted from cells embedded within the tube wall, as well as endothelial or epithelial barriers lining the lumen. The described approaches are anticipated to find applications in ECM-based organ-on-chip and biohybrid structures, hydraulic actuators, and soft machines.

A tough act to follow: collagen hydrogel modifications to improve mechanical and growth factor loading capabilities

Collagen hydrogels are among ​the most well-studied platforms for drug delivery and in situ tissue engineering, thanks to their low cost, low immunogenicity, versatility, biocompatibility, and similarity to the natural extracellular matrix (ECM). Despite collagen being largely responsible for the tensile properties of native connective tissues, collagen hydrogels have relatively low mechanical properties in the absence of covalent cross-linking. This is particularly problematic when attempting to regenerate stiffer and stronger native tissues such as bone. Furthermore, in contrast to hydrogels based on ECM proteins such as fibronectin, collagen hydrogels do not have any growth factor (GF)-specific binding sites and often cannot sequester physiological (small) amounts of the protein. GF binding and in situ presentation are properties that can aid significantly in the tissue regeneration process by dictating cell fate without causing adverse effects such as malignant tumorigenic tissue growth. To alleviate these issues, researchers have developed several strategies to increase the mechanical properties of collagen hydrogels using physical or chemical modifications. This can expand the applicability of collagen hydrogels to tissues subject to a continuous load. GF delivery has also been explored, mathematically and experimentally, through the development of direct loading, chemical cross-linking, electrostatic interaction, and other carrier systems. This comprehensive article explores the ways in which these parameters, mechanical properties and GF delivery, have been optimized in collagen hydrogel systems ​and examines their in vitro or in vivo biological effect. This article can, therefore, be a useful tool to streamline future studies in the field, by pointing researchers into the appropriate direction according to their collagen hydrogel design requirements.

Tailoring the assembly of collagen fibers in alginate microspheres

The application of microspheres instead of bulk hydrogels in cell-laden biomaterials offers multiple advantages such as a high surface-to-volume-ratio and, consequently, a better nutrition and oxygen transfer to and from cells. The preparation of inert alginate microspheres is facile, quick, and well-established and the fabrication of alginate-collagen microspheres has been previously reported. However, no detailed characterization of the collagen fibrillogenesis in the alginate matrix is available. We use second-harmonic imaging microscopy reflection confocal microscopy and turbidity assay to study the assembly of collagen in alginate microspheres. We show that the assembly of collagen fibers in a gelled alginate matrix is a complex process that can be aided by addition of small polar molecules, such as glycine and by a careful selection of the gelling buffer used to prepare alginate hydrogels.

Effect of molecular chirality on the collagen self-assembly

The function of molecular chirality in collagen self-assembly was presented.

Biological efficacy of perpendicular type-I collagen protruded from TiO2-nanotubes

The aim of this study was to evaluate the biological efficacy of a unique perpendicular protrusion of type-I collagen (Col-I) from TiO2 nanotubes (NT-EPF surface). We hypothesized that the NT-EPF surface would play bifunctional roles in stimulating platelet-mediated fibroblast recruitment and anchoring fibroblast-derived Col-I to form a perpendicular collagen assembly, mimicking the connective tissue attachment around natural teeth for the long-term maintenance of dental implants. Ti surface modification was accomplished in two steps. First, TiO2 nanotubes (NT) array was fabricated via anodization. Diameters and depths of NTs were controlled by applied voltage and duration. Subsequently, an electrophoretic fusion (EPF) method was applied to fuse Col-I into nanotube arrays in a perpendicular fashion. Surface wettability was assessed by contact angle measurement. The bioactivity of modified TiO2 surfaces was evaluated in terms of NIH3T3 fibroblast attachment, platelet activation, and collagen extension. Early attachment, aggregation, and activation of platelets as well as release of platelet-related growth factors were demonstrated on NT-EPF surfaces. Platelet-mediated NIH3T3 cells migration toward NT-EPF was significantly increased and the attached cells showed a typical fibrous morphology with elongated spindle shape. A direct linkage between pseudopod-like processes of fibroblasts to NT-EPF surfaces was observed. Furthermore, the engineered EPF collagen protrusion linked with cell-derived collagen in a perpendicular fashion. Within the limitation of this in vitro study, the TiO2 nanotube with perpendicular Col-I surface (NT-EPF) promoted better cell attachment, induced a strong platelet activation which suggested the ability to create a more robust soft tissue seal.

Emulating Human Tissues and Organs: A Bioprinting Perspective Toward Personalized Medicine

The lack of in vitro tissue and organ models capable of mimicking human physiology severely hinders the development and clinical translation of therapies and drugs with higher in vivo efficacy. Bioprinting allow us to fill this gap and generate 3D tissue analogues with complex functional and structural organization through the precise spatial positioning of multiple materials and cells. In this review, we report the latest developments in terms of bioprinting technologies for the manufacturing of cellular constructs with particular emphasis on material extrusion, jetting, and vat photopolymerization. We then describe the different base polymers employed in the formulation of bioinks for bioprinting and examine the strategies used to tailor their properties according to both processability and tissue maturation requirements. By relating function to organization in human development, we examine the potential of pluripotent stem cells in the context of bioprinting toward a new generation of tissue models for personalized medicine. We also highlight the most relevant attempts to engineer artificial models for the study of human organogenesis, disease, and drug screening. Finally, we discuss the most pressing challenges, opportunities, and future prospects in the field of bioprinting for tissue engineering (TE) and regenerative medicine (RM).

Effect of pH on properties of golden pompano skin collagen-based fibril gels by self-assembly in vitro

BACKGROUND

Application of fish skin collagen has received increasing attention due to mammalian derived diseases and religious limitations. Collagen fibril gel could be formed in vitro through the self-assembly process. The present study investigated the effect of pH on the self-assembly in vitro of acid-solubilized collagen (ASC) from golden pompano skin by determining the turbidity, rheological viscoelasticity, network structure, gel strength, and thermal stability of collagen fibril gel.

RESULTS

The isoelectric point of ASC was pH 5.27. The turbidity-time and rheological viscoelasticity results indicate that the collagen self-assembly rate in vitro at pH 7.0 was the slowest. The rate was accelerated by increasing or decreasing the pH. Scanning electron microscopy images show that the fibril diameters of the collagen fibril gels and the collagenous fibril number in the collagen fiber increased with the pH. The gel strength of the collagen fibril gel prepared at pH 5.0 was 22.06 g and increased up to 220.46 g when pH increased to 8.0. No obvious peaks were observed in the differential scanning calorimetry curves of the collagen fibril gels prepared at pH 5.0, whereas high endothermic peak temperature (T_m ) and enthalpy change (ΔH) were found in the collagen fibril gels prepared at pH 6.0-8.0.

CONCLUSION

It is concluded that the physical properties of ASC fibril gels can be improved by increasing the fibril diameter controlled by pH. © 2020 Society of Chemical Industry.

Continuous Formation of Ultrathin, Strong Collagen Sheets with Tunable Anisotropy and Compaction

The multiscale organization of protein-based fibrillar materials is a hallmark of many organs, but the recapitulation of hierarchal structures down to fibrillar scales, which is a requirement for withstanding physiological loading forces, has been challenging. We present a microfluidic strategy for the continuous, large-scale formation of strong, handleable, free-standing, multicentimeter-wide collagen sheets of unprecedented thinness through the application of hydrodynamic focusing with the simultaneous imposition of strain. Sheets as thin as 1.9 μm displayed tensile strengths of 0.5-2.7 MPa, Young's moduli of 3-36 MPa, and modulated the diffusion of molecules as a function of collagen nanoscale structure. Smooth muscle cells cultured on engineered sheets oriented in the direction of aligned collagen fibrils and generated coordinated vasomotor responses. The described biofabrication approach enables rapid formation of ultrathin collagen sheets that withstand physiologically relevant loads for applications in tissue engineering and regenerative medicine, as well as in organ-on-chip and biohybrid devices.

Structural characterization and in vitro immunogenicity evaluation of amphibian-derived collagen type II from the cartilage of Chinese Giant Salamander (Andrias davidianus)

Collagen type II (CT-II) has unique biological activities and functions, yet the knowledge on amphibian-derived CT-II is rare. Herein, acid-soluble collagen (ASC) and pepsin-soluble collagen (PSC) were successfully isolated and characterized from the cartilage of Chinese Giant Salamander (CGS). The in vitro immunogenicity of collagen was then evaluated and compared with that of the standard bovine CT-II (SCT-II) by T-lymphocyte cell proliferation activity. Results demonstrated that ASC and PSC were predominantly CT-II along with minor collagen type I and maintained intact triple-helical structure of nature collagen. Compared with SCT-II, higher glycine content (337.80 and 339.93 residues/1000 residues) and lower degree of proline hydroxylation (51.81% and 52.52%) were observed in ASC and PSC. Additionally, PSC showed comparable T _d (63 °C) and higher T _m (109 °C) than SCT-II (64 °C and 103 °C, respectively), indicating its high thermal and structural stability. SEM revealed that the lyophilized ASC and PSC had interconnected porous network structures of collagen-based materials. Moreover, different from SCT-II, both ASC and PSC presented no immunogenicity because they did not cause obvious proliferation of murine T-lymphocyte regardless of the induced concentration of collagen increased from 8 to 417 μg/mL. These data suggested that the amphibian-derived CGS cartilage collagens avoid the immunogenic risk of terrestrial animal collagen, and show high thermal stability and potential advantage in biomedical application.

Tissue mimetic hyaluronan bioink containing collagen fibers with controlled orientation modulating cell migration and alignment

Biofabrication is providing scientists and clinicians the ability to produce engineered tissues with desired shapes and gradients of composition and biological cues. Typical resolutions achieved with extrusion-based bioprinting are at the macroscopic level. However, for capturing the fibrillar nature of the extracellular matrix (ECM), it is necessary to arrange ECM components at smaller scales, down to the micron and the molecular level. Herein, we introduce a bioink containing the tyramine derivative of hyaluronan (HA; henceforth known as THA) and collagen (Col) type 1. In this bioink, similar to connective tissues, Col is present in the fibrillar form, and HA functions as a viscoelastic space filler. THA was enzymatically cross-linked under mild conditions allowing simultaneous Col fibrillogenesis, thus achieving a homogeneous distribution of Col fibrils within the viscoelastic HA-based matrix. The THA-Col composite displayed synergistic properties in terms of storage modulus and shear thinning, translating into good printability. Shear-induced alignment of the Col fibrils along the printing direction was achieved and quantified via immunofluorescence and second-harmonic generation. Cell-free and cell-laden constructs were printed and characterized, analyzing the influence of the controlled microscopic anisotropy on human bone marrow-derived mesenchymal stromal cell (hMSC) migration. Anisotropic HA-Col showed cell-instructive properties modulating hMSC adhesion, morphology, and migration from micropellets stimulated by the presence and the orientation of Col fibers. Actin filament staining showed that hMSCs embedded in aligned constructs displayed increased cytoskeleton alignment along the fibril direction. Based on gene expression of cartilage/bone markers and ECM production, hMSCs embedded in the isotropic bioink displayed chondrogenic differentiation comparable with standard pellet culture by means of proteoglycan production (safranin O staining and proteoglycan quantification). The possibility of printing matrix components with control over microscopic alignment brings biofabrication one step closer to capturing the complexity of native tissues.

A Novel Composite Biomaterial Made of Jellyfish and Porcine Collagens Accelerates Dermal Wound Healing by Enhancing Reepithelization and Granulation Tissue Formation in Mice

Background and Objective: Impaired dermal wound healing represents a major medical issue in today's aging populations. Granulation tissue formation in the dermis and reepithelization of the epidermis are both important and necessary for proper wound healing. Although a number of artificial dermal grafts have been used to treat full-thickness dermal loss in humans, they do not induce reepithelization of the wound, requiring subsequent epithelial transplantation. In the present study, we sought a novel biomaterial that accelerates the wound healing process. Approach: We prepared a composite biomaterial made of jellyfish and porcine collagens and developed a hybrid-type dermal graft that composed of the upper layer film and the lower layer sponge made of this composite biomaterial. Its effect on dermal wound healing was examined using a full-thickness excisional wound model. Structural properties of the dermal graft and histological features of the regenerating skin tissue were characterized by electron microscopic observation and immunohistological examination, respectively. Results: The composite biomaterial film stimulated migration of keratinocytes, leading to prompt reepithelization. The regenerating epithelium consisted of two distinct cell populations: keratin 5-positive basal keratinocytes and more differentiated cells expressing tight junction proteins such as claudin-1 and occludin. At the same time, the sponge made of the composite biomaterial possessed a significantly enlarged intrinsic space and enhanced infiltration of inflammatory cells and fibroblasts, accelerating granulation tissue formation. Innovation: This newly developed composite biomaterial may serve as a dermal graft that accelerates wound healing in various pathological conditions. Conclusion: We have developed a novel dermal graft composed of jellyfish and porcine collagens that remarkably accelerates the wound healing process.

Effects of phosphate ion concentration on in-vitro fibrillogenesis of sturgeon type I collagen

Nonmammalian collagens have attracted significant attention owing to their potential for use as a source of cell scaffolds for tissue engineering. Since the morphology of collagen fibrils controls cell proliferation and differentiation, its regulation is essential for fabricating scaffolds with desirable characteristics. In this study, we evaluated the effects of the phosphate ion (Pi) concentration on the characteristics of fibrils formed from swim bladder type I collagen (SBC) and skin type I collagen (SC) from the Bester sturgeon. An increase in the Pi concentration decreased the fibril formation rate, promoted the formation of thick fibrils, and increased the thermal stability of the fibrils for both SBC and SC. However, the SBC and SC fibrils exhibited different fibril formation rates, degrees of fibrillogenesis, morphologies, and denaturation temperatures for the same reaction conditions. Finally, by regulating the Pi concentration, various types of SBC and SC fibrils could be coated on cell culture wells, and fibroblasts could be cultured on them. The results showed that thin fibrils enhance fibroblast extension and proliferation, whereas thick fibrils restrain fibroblast extension but orient them in the same direction. The results of this study suggest that SBC fibrils, which exhibit diverse morphologies, are suitable for use as a novel scaffold material, whose characteristics can be tailored readily by varying the Pi concentration.